From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel-01 <edk2-devel@lists.01.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
nadavh@marvell.com, "jsd@semihalf.com" <jsd@semihalf.com>,
Grzegorz Jaszczyk <jaz@semihalf.com>,
Kostya Porotchkin <kostap@marvell.com>
Subject: Re: [platforms: PATCH v3 03/12] Marvell/Library: Introduce MvGpioLib class
Date: Thu, 17 Jan 2019 14:18:53 +0000 [thread overview]
Message-ID: <20190117141853.qioramxzdh2zaymh@bivouac.eciton.net> (raw)
In-Reply-To: <CAPv3WKf_tp=BK-TuvJXSiBtLK5bAnqhH3+=LgrxKWfuMZ4EO0g@mail.gmail.com>
Series pushed as 944fbb62d6..9b725b6ebb
Thanks!
On Thu, Jan 17, 2019 at 01:19:52PM +0100, Marcin Wojtas wrote:
> Hi Leif,
>
> Sorry for omitting. I confirm the patch is:
> Contributed-under: TianoCore Contribution Agreement 1.1
>
> Will you add it (as well as remove class from the subject) or should I resubmit?
>
> Thanks,
> Marcin
>
> czw., 17 sty 2019 o 12:33 Leif Lindholm <leif.lindholm@linaro.org> napisał(a):
> >
> > (Can drop the "class" from subject line)
> >
> > With that:
> > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> >
> > On Thu, Jan 17, 2019 at 12:15:06PM +0100, Marcin Wojtas wrote:
> > > Following patches will add two drivers that are capable
> > > of producing the generic EMBEDDED_GPIO protocol. In order
> > > to handle a situation, when the consumer module attempts
> > > to locate and open a proper protocol, add a library
> > > helper function.
> > >
> > > In order to ease description of used GPIO pins and controllers
> > > of the Armada 7k8k platforms, add the common enum types.
> > >
> > > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> > > ---
> > > Silicon/Marvell/Marvell.dec | 1 +
> > > Silicon/Marvell/Library/MvGpioLib/MvGpioLib.inf | 32 +++++
> > > Silicon/Marvell/Include/Library/MvGpioLib.h | 68 ++++++++++
> > > Silicon/Marvell/Library/MvGpioLib/MvGpioLib.c | 132 ++++++++++++++++++++
> > > 4 files changed, 233 insertions(+)
> > > create mode 100644 Silicon/Marvell/Library/MvGpioLib/MvGpioLib.inf
> > > create mode 100644 Silicon/Marvell/Include/Library/MvGpioLib.h
> > > create mode 100644 Silicon/Marvell/Library/MvGpioLib/MvGpioLib.c
> > >
> > > diff --git a/Silicon/Marvell/Marvell.dec b/Silicon/Marvell/Marvell.dec
> > > index 616624e..ac922a0 100644
> > > --- a/Silicon/Marvell/Marvell.dec
> > > +++ b/Silicon/Marvell/Marvell.dec
> > > @@ -63,6 +63,7 @@
> > > ArmadaBoardDescLib|Include/Library/ArmadaBoardDescLib.h
> > > ArmadaIcuLib|Include/Library/ArmadaIcuLib.h
> > > ArmadaSoCDescLib|Include/Library/ArmadaSoCDescLib.h
> > > + MvGpioLib|Include/Library/MvGpioLib.h
> > > SampleAtResetLib|Include/Library/SampleAtResetLib.h
> > >
> > > [Protocols]
> > > diff --git a/Silicon/Marvell/Library/MvGpioLib/MvGpioLib.inf b/Silicon/Marvell/Library/MvGpioLib/MvGpioLib.inf
> > > new file mode 100644
> > > index 0000000..3bc54ce
> > > --- /dev/null
> > > +++ b/Silicon/Marvell/Library/MvGpioLib/MvGpioLib.inf
> > > @@ -0,0 +1,32 @@
> > > +## @file
> > > +#
> > > +# Copyright (C) 2018, Marvell International Ltd. and its affiliates<BR>
> > > +#
> > > +# This program and the accompanying materials are licensed and made available
> > > +# under the terms and conditions of the BSD License which accompanies this
> > > +# distribution. The full text of the license may be found at
> > > +# http://opensource.org/licenses/bsd-license.php
> > > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> > > +# IMPLIED.
> > > +#
> > > +##
> > > +
> > > +[Defines]
> > > + INF_VERSION = 0x0001001A
> > > + BASE_NAME = MvGpioLib
> > > + FILE_GUID = f4386b44-6bc2-4fa1-9989-8513bbb22692
> > > + MODULE_TYPE = BASE
> > > + VERSION_STRING = 1.0
> > > + LIBRARY_CLASS = MvGpioLib
> > > +
> > > +[Sources]
> > > + MvGpioLib.c
> > > +
> > > +[Packages]
> > > + EmbeddedPkg/EmbeddedPkg.dec
> > > + MdePkg/MdePkg.dec
> > > + Silicon/Marvell/Marvell.dec
> > > +
> > > +[LibraryClasses]
> > > + DebugLib
> > > diff --git a/Silicon/Marvell/Include/Library/MvGpioLib.h b/Silicon/Marvell/Include/Library/MvGpioLib.h
> > > new file mode 100644
> > > index 0000000..a14acdf
> > > --- /dev/null
> > > +++ b/Silicon/Marvell/Include/Library/MvGpioLib.h
> > > @@ -0,0 +1,68 @@
> > > +/**
> > > +*
> > > +* Copyright (C) 2018, Marvell International Ltd. and its affiliates.
> > > +*
> > > +* This program and the accompanying materials are licensed and made available
> > > +* under the terms and conditions of the BSD License which accompanies this
> > > +* distribution. The full text of the license may be found at
> > > +* http://opensource.org/licenses/bsd-license.php
> > > +*
> > > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > > +*
> > > +**/
> > > +#ifndef __MV_GPIO_LIB_H__
> > > +#define __MV_GPIO_LIB_H__
> > > +
> > > +#include <Protocol/EmbeddedGpio.h>
> > > +
> > > +typedef enum {
> > > + MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER,
> > > + MV_GPIO_DRIVER_TYPE_PCA95XX,
> > > +} MV_GPIO_DRIVER_TYPE;
> > > +
> > > +typedef enum {
> > > + MV_GPIO_AP806_CONTROLLER0,
> > > + MV_GPIO_CP0_CONTROLLER0,
> > > + MV_GPIO_CP0_CONTROLLER1,
> > > + MV_GPIO_CP1_CONTROLLER0,
> > > + MV_GPIO_CP1_CONTROLLER1,
> > > + MV_GPIO_CP2_CONTROLLER0,
> > > + MV_GPIO_CP2_CONTROLLER1,
> > > +} MV_GPIO_SOC_CONTROLLER_TYPE;
> > > +
> > > +typedef enum {
> > > + PCA9505_ID,
> > > + PCA9534_ID,
> > > + PCA9535_ID,
> > > + PCA9536_ID,
> > > + PCA9537_ID,
> > > + PCA9538_ID,
> > > + PCA9539_ID,
> > > + PCA9554_ID,
> > > + PCA9555_ID,
> > > + PCA9556_ID,
> > > + PCA9557_ID,
> > > + PCA95XX_MAX_ID,
> > > +} MV_GPIO_EXPANDER_TYPE_PCA95XX;
> > > +
> > > +typedef struct {
> > > + VENDOR_DEVICE_PATH Header;
> > > + MV_GPIO_DRIVER_TYPE GpioDriverType;
> > > + EFI_DEVICE_PATH_PROTOCOL End;
> > > +} MV_GPIO_DEVICE_PATH;
> > > +
> > > +typedef struct {
> > > + UINTN ControllerId;
> > > + UINTN PinNumber;
> > > + BOOLEAN ActiveHigh;
> > > +} MV_GPIO_PIN;
> > > +
> > > +EFI_STATUS
> > > +EFIAPI
> > > +MvGpioGetProtocol (
> > > + IN MV_GPIO_DRIVER_TYPE GpioDriverType,
> > > + IN OUT EMBEDDED_GPIO **GpioProtocol
> > > + );
> > > +
> > > +#endif // __MV_GPIO_LIB_H__
> > > diff --git a/Silicon/Marvell/Library/MvGpioLib/MvGpioLib.c b/Silicon/Marvell/Library/MvGpioLib/MvGpioLib.c
> > > new file mode 100644
> > > index 0000000..a95d5ae
> > > --- /dev/null
> > > +++ b/Silicon/Marvell/Library/MvGpioLib/MvGpioLib.c
> > > @@ -0,0 +1,132 @@
> > > +/**
> > > +*
> > > +* Copyright (C) 2018, Marvell International Ltd. and its affiliates.
> > > +*
> > > +* This program and the accompanying materials are licensed and made available
> > > +* under the terms and conditions of the BSD License which accompanies this
> > > +* distribution. The full text of the license may be found at
> > > +* http://opensource.org/licenses/bsd-license.php
> > > +*
> > > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> > > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> > > +*
> > > +**/
> > > +#include <Uefi.h>
> > > +
> > > +#include <Library/DebugLib.h>
> > > +#include <Library/DevicePathLib.h>
> > > +#include <Library/MemoryAllocationLib.h>
> > > +#include <Library/MvGpioLib.h>
> > > +#include <Library/UefiBootServicesTableLib.h>
> > > +
> > > +#include <Protocol/EmbeddedGpio.h>
> > > +
> > > +/*
> > > + * Check if the driver type matches the requested value.
> > > + * In case of the success open the GPIO protocol and return.
> > > + */
> > > +STATIC
> > > +EFI_STATUS
> > > +MvGpioFindMatchingDriver (
> > > + IN MV_GPIO_DRIVER_TYPE GpioDriverType,
> > > + IN EFI_HANDLE HandleBuffer,
> > > + IN EFI_DEVICE_PATH *DevicePath,
> > > + IN OUT EMBEDDED_GPIO **GpioProtocol
> > > + )
> > > +{
> > > + MV_GPIO_DEVICE_PATH *GpioDevicePath;
> > > + EFI_STATUS Status;
> > > +
> > > + while (!IsDevicePathEndType (DevicePath)) {
> > > + /* Check if GpioDriverType matches one found in the device path */
> > > + GpioDevicePath = (MV_GPIO_DEVICE_PATH *)DevicePath;
> > > + if (GpioDevicePath->GpioDriverType != GpioDriverType) {
> > > + DevicePath = NextDevicePathNode (DevicePath);
> > > + continue;
> > > + }
> > > +
> > > + /*
> > > + * Open GpioProtocol. With EFI_OPEN_PROTOCOL_GET_PROTOCOL attribute
> > > + * the consumer is not obliged to call CloseProtocol.
> > > + */
> > > + Status = gBS->OpenProtocol (HandleBuffer,
> > > + &gEmbeddedGpioProtocolGuid,
> > > + (VOID **)GpioProtocol,
> > > + gImageHandle,
> > > + NULL,
> > > + EFI_OPEN_PROTOCOL_GET_PROTOCOL);
> > > + return Status;
> > > + }
> > > +
> > > + return EFI_NOT_FOUND;
> > > +}
> > > +
> > > +/*
> > > + * Select desired protocol producer upon MV_GPIO_DRIVER_TYPE
> > > + * field of driver's MV_GPIO_DEVICE_PATH.
> > > + */
> > > +EFI_STATUS
> > > +EFIAPI
> > > +MvGpioGetProtocol (
> > > + IN MV_GPIO_DRIVER_TYPE GpioDriverType,
> > > + IN OUT EMBEDDED_GPIO **GpioProtocol
> > > + )
> > > +{
> > > + EFI_DEVICE_PATH *DevicePath;
> > > + EFI_HANDLE *HandleBuffer;
> > > + EFI_STATUS Status;
> > > + UINTN HandleCount;
> > > + UINTN Index;
> > > +
> > > + /* Locate Handles of all EMBEDDED_GPIO producers */
> > > + Status = gBS->LocateHandleBuffer (ByProtocol,
> > > + &gEmbeddedGpioProtocolGuid,
> > > + NULL,
> > > + &HandleCount,
> > > + &HandleBuffer);
> > > + if (EFI_ERROR (Status)) {
> > > + DEBUG ((DEBUG_ERROR, "%a: Unable to locate handles\n", __FUNCTION__));
> > > + return Status;
> > > + }
> > > +
> > > + /* Iterate over all protocol producers */
> > > + for (Index = 0; Index < HandleCount; Index++) {
> > > + /* Open device path protocol installed on each handle */
> > > + Status = gBS->OpenProtocol (HandleBuffer[Index],
> > > + &gEfiDevicePathProtocolGuid,
> > > + (VOID **)&DevicePath,
> > > + gImageHandle,
> > > + NULL,
> > > + EFI_OPEN_PROTOCOL_GET_PROTOCOL);
> > > + if (EFI_ERROR (Status)) {
> > > + DEBUG ((DEBUG_ERROR, "%a: Unable to find DevicePath\n", __FUNCTION__));
> > > + continue;
> > > + }
> > > +
> > > + /*
> > > + * Check if the driver type matches the requested value.
> > > + * In case of the success open the GPIO protocol and return.
> > > + * If there is no match, repeat procedure with the next handle.
> > > + */
> > > + Status = MvGpioFindMatchingDriver (GpioDriverType,
> > > + HandleBuffer[Index],
> > > + DevicePath,
> > > + GpioProtocol);
> > > + if (Status == EFI_NOT_FOUND) {
> > > + continue;
> > > + } else if (EFI_ERROR (Status)) {
> > > + DEBUG ((DEBUG_ERROR,
> > > + "%a: Unable to open GPIO protocol\n",
> > > + __FUNCTION__));
> > > + }
> > > +
> > > + gBS->FreePool (HandleBuffer);
> > > +
> > > + return Status;
> > > + }
> > > +
> > > + /* No matching GPIO protocol producer was found */
> > > + gBS->FreePool (HandleBuffer);
> > > +
> > > + return EFI_NOT_FOUND;
> > > +}
> > > --
> > > 2.7.4
> > >
next prev parent reply other threads:[~2019-01-17 14:18 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-17 11:15 [platforms: PATCH v3 00/12] Armada 7k8k GPIO support Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 01/12] Marvell/Library: ArmadaSoCDescLib: Add GPIO information Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 02/12] Marvell/Library: ArmadaBoardDescLib: " Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 03/12] Marvell/Library: Introduce MvGpioLib class Marcin Wojtas
2019-01-17 11:33 ` Leif Lindholm
2019-01-17 12:19 ` Marcin Wojtas
2019-01-17 14:18 ` Leif Lindholm [this message]
2019-01-17 14:39 ` Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 04/12] SolidRun/Armada80x0McBin: Extend board description library with GPIO Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 05/12] Marvell/Armada70x0Db: " Marcin Wojtas
2019-01-17 11:34 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 06/12] Marvell/Armada80x0Db: " Marcin Wojtas
2019-01-17 11:34 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 07/12] Marvell/Drivers: MvBoardDesc: Extend protocol with GPIO support Marcin Wojtas
2019-01-17 11:50 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver Marcin Wojtas
2019-01-17 11:52 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 09/12] Marvell/Drivers: I2c: Use common header for macros Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 10/12] Marvell/Drivers: MvPca95xxDxe: Introduce GPIO expander driver Marcin Wojtas
2019-01-17 11:55 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 11/12] Marvell/Armada7k8k: Enable GPIO drivers compilation Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 12/12] Marvell/Armada7k8k: Introduce NonDiscoverable device init routines Marcin Wojtas
2019-01-17 12:03 ` [platforms: PATCH v3 00/12] Armada 7k8k GPIO support Leif Lindholm
2019-01-17 12:26 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190117141853.qioramxzdh2zaymh@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox