From: Hao Wu <hao.a.wu@intel.com>
To: edk2-devel@lists.01.org
Cc: Hao Wu <hao.a.wu@intel.com>, Jian J Wang <jian.j.wang@intel.com>,
Ray Ni <ray.ni@intel.com>
Subject: [PATCH v2 05/12] MdeModulePkg/NvmExpressPei: Avoid updating the module-level variable
Date: Thu, 31 Jan 2019 10:48:47 +0800 [thread overview]
Message-ID: <20190131024854.4880-6-hao.a.wu@intel.com> (raw)
In-Reply-To: <20190131024854.4880-1-hao.a.wu@intel.com>
This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.
Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h | 12 +-
MdeModulePkg/Bus/Pci/NvmExpressPei/DmaMem.c | 153 +++++++++++---------
MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c | 11 +-
3 files changed, 92 insertions(+), 84 deletions(-)
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
index 0bd62c2459..0135eca6f0 100644
--- a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
+++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
@@ -2,7 +2,7 @@
The NvmExpressPei driver is used to manage non-volatile memory subsystem
which follows NVM Express specification at PEI phase.
- Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -147,13 +147,9 @@ struct _PEI_NVME_CONTROLLER_PRIVATE_DATA {
CR (a, PEI_NVME_CONTROLLER_PRIVATE_DATA, EndOfPeiNotifyList, NVME_PEI_CONTROLLER_PRIVATE_DATA_SIGNATURE)
-/**
- Initialize IOMMU.
-**/
-VOID
-IoMmuInit (
- VOID
- );
+//
+// Internal functions
+//
/**
Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/DmaMem.c b/MdeModulePkg/Bus/Pci/NvmExpressPei/DmaMem.c
index 51b48d38dd..cb629c16b0 100644
--- a/MdeModulePkg/Bus/Pci/NvmExpressPei/DmaMem.c
+++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/DmaMem.c
@@ -1,7 +1,7 @@
/** @file
The DMA memory help function.
- Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -16,7 +16,33 @@
#include "NvmExpressPei.h"
-EDKII_IOMMU_PPI *mIoMmu;
+/**
+ Get IOMMU PPI.
+
+ @return Pointer to IOMMU PPI.
+
+**/
+EDKII_IOMMU_PPI *
+GetIoMmu (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EDKII_IOMMU_PPI *IoMmu;
+
+ IoMmu = NULL;
+ Status = PeiServicesLocatePpi (
+ &gEdkiiIoMmuPpiGuid,
+ 0,
+ NULL,
+ (VOID **) &IoMmu
+ );
+ if (!EFI_ERROR (Status) && (IoMmu != NULL)) {
+ return IoMmu;
+ }
+
+ return NULL;
+}
/**
Provides the controller-specific addresses required to access system memory from a
@@ -46,18 +72,21 @@ IoMmuMap (
OUT VOID **Mapping
)
{
- EFI_STATUS Status;
- UINT64 Attribute;
-
- if (mIoMmu != NULL) {
- Status = mIoMmu->Map (
- mIoMmu,
- Operation,
- HostAddress,
- NumberOfBytes,
- DeviceAddress,
- Mapping
- );
+ EFI_STATUS Status;
+ UINT64 Attribute;
+ EDKII_IOMMU_PPI *IoMmu;
+
+ IoMmu = GetIoMmu ();
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->Map (
+ IoMmu,
+ Operation,
+ HostAddress,
+ NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
@@ -78,11 +107,11 @@ IoMmuMap (
ASSERT(FALSE);
return EFI_INVALID_PARAMETER;
}
- Status = mIoMmu->SetAttribute (
- mIoMmu,
- *Mapping,
- Attribute
- );
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ Attribute
+ );
if (EFI_ERROR (Status)) {
return Status;
}
@@ -108,11 +137,14 @@ IoMmuUnmap (
IN VOID *Mapping
)
{
- EFI_STATUS Status;
+ EFI_STATUS Status;
+ EDKII_IOMMU_PPI *IoMmu;
+
+ IoMmu = GetIoMmu ();
- if (mIoMmu != NULL) {
- Status = mIoMmu->SetAttribute (mIoMmu, Mapping, 0);
- Status = mIoMmu->Unmap (mIoMmu, Mapping);
+ if (IoMmu != NULL) {
+ Status = IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ Status = IoMmu->Unmap (IoMmu, Mapping);
} else {
Status = EFI_SUCCESS;
}
@@ -148,39 +180,42 @@ IoMmuAllocateBuffer (
EFI_STATUS Status;
UINTN NumberOfBytes;
EFI_PHYSICAL_ADDRESS HostPhyAddress;
+ EDKII_IOMMU_PPI *IoMmu;
*HostAddress = NULL;
*DeviceAddress = 0;
- if (mIoMmu != NULL) {
- Status = mIoMmu->AllocateBuffer (
- mIoMmu,
- EfiBootServicesData,
- Pages,
- HostAddress,
- 0
- );
+ IoMmu = GetIoMmu ();
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->AllocateBuffer (
+ IoMmu,
+ EfiBootServicesData,
+ Pages,
+ HostAddress,
+ 0
+ );
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
NumberOfBytes = EFI_PAGES_TO_SIZE(Pages);
- Status = mIoMmu->Map (
- mIoMmu,
- EdkiiIoMmuOperationBusMasterCommonBuffer,
- *HostAddress,
- &NumberOfBytes,
- DeviceAddress,
- Mapping
- );
+ Status = IoMmu->Map (
+ IoMmu,
+ EdkiiIoMmuOperationBusMasterCommonBuffer,
+ *HostAddress,
+ &NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
- Status = mIoMmu->SetAttribute (
- mIoMmu,
- *Mapping,
- EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
- );
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
+ );
if (EFI_ERROR (Status)) {
return Status;
}
@@ -219,31 +254,17 @@ IoMmuFreeBuffer (
IN VOID *Mapping
)
{
- EFI_STATUS Status;
+ EFI_STATUS Status;
+ EDKII_IOMMU_PPI *IoMmu;
- if (mIoMmu != NULL) {
- Status = mIoMmu->SetAttribute (mIoMmu, Mapping, 0);
- Status = mIoMmu->Unmap (mIoMmu, Mapping);
- Status = mIoMmu->FreeBuffer (mIoMmu, Pages, HostAddress);
+ IoMmu = GetIoMmu ();
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ Status = IoMmu->Unmap (IoMmu, Mapping);
+ Status = IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
} else {
Status = EFI_SUCCESS;
}
return Status;
}
-
-/**
- Initialize IOMMU.
-**/
-VOID
-IoMmuInit (
- VOID
- )
-{
- PeiServicesLocatePpi (
- &gEdkiiIoMmuPpiGuid,
- 0,
- NULL,
- (VOID **)&mIoMmu
- );
-}
-
diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
index fabec37e36..2fe73e942c 100644
--- a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
+++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
@@ -2,7 +2,7 @@
The NvmExpressPei driver is used to manage non-volatile memory subsystem
which follows NVM Express specification at PEI phase.
- Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -215,13 +215,6 @@ NvmExpressPeimEntry (
EFI_PHYSICAL_ADDRESS DeviceAddress;
//
- // Shadow this PEIM to run from memory
- //
- if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
- return EFI_SUCCESS;
- }
-
- //
// Locate the NVME host controller PPI
//
Status = PeiServicesLocatePpi (
@@ -235,8 +228,6 @@ NvmExpressPeimEntry (
return EFI_UNSUPPORTED;
}
- IoMmuInit ();
-
Controller = 0;
MmioBase = 0;
while (TRUE) {
--
2.12.0.windows.1
next prev parent reply other threads:[~2019-01-31 2:49 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 2:48 [PATCH v2 00/12] Split the S3 PEI phase HW init codes from Opal driver Hao Wu
2019-01-31 2:48 ` [PATCH v2 01/12] MdeModulePkg: Add definitions for ATA AHCI host controller PPI Hao Wu
2019-01-31 3:25 ` Ni, Ray
2019-01-31 2:48 ` [PATCH v2 02/12] MdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI Hao Wu
2019-01-31 3:22 ` Ni, Ray
2019-01-31 5:28 ` Wu, Hao A
2019-01-31 2:48 ` [PATCH v2 03/12] MdeModulePkg: Add definitions for Storage Security Command PPI Hao Wu
2019-01-31 3:26 ` Ni, Ray
2019-01-31 2:48 ` [PATCH v2 04/12] MdeModulePkg: Add GUID for LockBox to save storage dev to init in S3 Hao Wu
2019-01-31 3:27 ` Ni, Ray
2019-01-31 5:30 ` Wu, Hao A
2019-01-31 2:48 ` Hao Wu [this message]
2019-01-31 3:28 ` [PATCH v2 05/12] MdeModulePkg/NvmExpressPei: Avoid updating the module-level variable Ni, Ray
2019-01-31 2:48 ` [PATCH v2 06/12] MdeModulePkg/NvmExpressPei: Add logic to produce SSC PPI Hao Wu
2019-01-31 3:35 ` Ni, Ray
2019-01-31 5:40 ` Wu, Hao A
2019-01-31 2:48 ` [PATCH v2 07/12] MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox Hao Wu
2019-01-31 3:45 ` Ni, Ray
2019-01-31 5:45 ` Wu, Hao A
2019-01-31 2:48 ` [PATCH v2 08/12] MdeModulePkg/AhciPei: Add AHCI mode ATA device support in PEI Hao Wu
2019-01-31 5:49 ` Ni, Ruiyu
2019-01-31 2:48 ` [PATCH v2 09/12] MdeModulePkg/SmmLockBoxLib: Use 'DEBUG_' prefix instead of 'EFI_D_' Hao Wu
2019-01-31 5:49 ` Ni, Ruiyu
2019-01-31 2:48 ` [PATCH v2 10/12] MdeModulePkg/SmmLockBox(PEI): Remove an ASSERT in RestoreLockBox() Hao Wu
2019-01-31 5:50 ` Ni, Ruiyu
2019-01-31 5:53 ` Wu, Hao A
2019-01-31 2:48 ` [PATCH v2 11/12] MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox() Hao Wu
2019-01-31 6:00 ` Ni, Ruiyu
2019-01-31 2:48 ` [PATCH v2 12/12] SecurityPkg/OpalPassword: Remove HW init codes and consume SSC PPI Hao Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190131024854.4880-6-hao.a.wu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox