From: Hao Wu <hao.a.wu@intel.com>
To: edk2-devel@lists.01.org
Cc: Hao Wu <hao.a.wu@intel.com>, Jian J Wang <jian.j.wang@intel.com>,
Ruiyu Ni <ruiyu.ni@intel.com>, Eric Dong <eric.dong@intel.com>
Subject: [PATCH v3 02/12] MdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI
Date: Fri, 1 Feb 2019 13:47:18 +0800 [thread overview]
Message-ID: <20190201054728.8612-3-hao.a.wu@intel.com> (raw)
In-Reply-To: <20190201054728.8612-1-hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.
More specifically, the PPI will provide services to:
* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
host controller (by service 'GetDevicePath').
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
MdeModulePkg/MdeModulePkg.dec | 3 +
MdeModulePkg/Include/Ppi/AtaPassThru.h | 219 ++++++++++++++++++++
2 files changed, 222 insertions(+)
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 4411185073..8efb19e626 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -483,6 +483,9 @@
## Include/Ppi/AtaAhciController.h
gEdkiiPeiAtaAhciHostControllerPpiGuid = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }
+ ## Include/Ppi/AtaPassThru.h
+ gEdkiiPeiAtaPassThruPpiGuid = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
diff --git a/MdeModulePkg/Include/Ppi/AtaPassThru.h b/MdeModulePkg/Include/Ppi/AtaPassThru.h
new file mode 100644
index 0000000000..78bdaef9e2
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/AtaPassThru.h
@@ -0,0 +1,219 @@
+/** @file
+
+ Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EDKII_ATA_PASS_THRU_PPI_H_
+#define _EDKII_ATA_PASS_THRU_PPI_H_
+
+#include <Protocol/DevicePath.h>
+#include <Protocol/AtaPassThru.h>
+
+///
+/// Global ID for the EDKII_PEI_ATA_PASS_THRU_PPI.
+///
+#define EDKII_PEI_ATA_PASS_THRU_PPI_GUID \
+ { \
+ 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } \
+ }
+
+//
+// Forward declaration for the EDKII_PEI_ATA_PASS_THRU_PPI.
+//
+typedef struct _EDKII_PEI_ATA_PASS_THRU_PPI EDKII_PEI_ATA_PASS_THRU_PPI;
+
+//
+// Revision The revision to which the ATA Pass Thru PPI interface adheres.
+// All future revisions must be backwards compatible.
+// If a future version is not back wards compatible it is not the same GUID.
+//
+#define EDKII_PEI_ATA_PASS_THRU_PPI_REVISION 0x00010000
+
+
+/**
+ Sends an ATA command to an ATA device that is attached to the ATA controller.
+
+ @param[in] This The PPI instance pointer.
+ @param[in] Port The port number of the ATA device to send
+ the command.
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA
+ device to send the command.
+ If there is no port multiplier, then specify
+ 0xFFFF.
+ @param[in,out] Packet A pointer to the ATA command to send to
+ the ATA device specified by Port and
+ PortMultiplierPort.
+
+ @retval EFI_SUCCESS The ATA command was sent by the host. For
+ bi-directional commands, InTransferLength bytes
+ were transferred from InDataBuffer. For write
+ and bi-directional commands, OutTransferLength
+ bytes were transferred by OutDataBuffer.
+ @retval EFI_NOT_FOUND The specified ATA device is not found.
+ @retval EFI_INVALID_PARAMETER The contents of Acb are invalid. The ATA command
+ was not sent, so no additional status information
+ is available.
+ @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number
+ of bytes that could be transferred is returned
+ in InTransferLength. For write and bi-directional
+ commands, OutTransferLength bytes were transferred
+ by OutDataBuffer.
+ @retval EFI_NOT_READY The ATA command could not be sent because there
+ are too many ATA commands already queued. The
+ caller may retry again later.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to
+ send the ATA command.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_PASSTHRU) (
+ IN EDKII_PEI_ATA_PASS_THRU_PPI *This,
+ IN UINT16 Port,
+ IN UINT16 PortMultiplierPort,
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet
+ );
+
+/**
+ Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
+ These can either be the list of ports where ATA devices are actually present or the
+ list of legal port numbers for the ATA controller. Regardless, the caller of this
+ function must probe the port number returned to see if an ATA device is actually
+ present at that location on the ATA controller.
+
+ The GetNextPort() function retrieves the port number on an ATA controller. If on
+ input Port is 0xFFFF, then the port number of the first port on the ATA controller
+ is returned in Port and EFI_SUCCESS is returned.
+
+ If Port is a port number that was returned on a previous call to GetNextPort(),
+ then the port number of the next port on the ATA controller is returned in Port,
+ and EFI_SUCCESS is returned. If Port is not 0xFFFF and Port was not returned on
+ a previous call to GetNextPort(), then EFI_INVALID_PARAMETER is returned.
+
+ If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND
+ is returned.
+
+ @param[in] This The PPI instance pointer.
+ @param[in,out] Port On input, a pointer to the port number on the ATA controller.
+ On output, a pointer to the next port number on the ATA
+ controller. An input value of 0xFFFF retrieves the first
+ port number on the ATA controller.
+
+ @retval EFI_SUCCESS The next port number on the ATA controller was
+ returned in Port.
+ @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
+ @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned
+ on a previous call to GetNextPort().
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_THRU_GET_NEXT_PORT) (
+ IN EDKII_PEI_ATA_PASS_THRU_PPI *This,
+ IN OUT UINT16 *Port
+ );
+
+/**
+ Used to retrieve the list of legal port multiplier port numbers for ATA devices
+ on a port of an ATA controller. These can either be the list of port multiplier
+ ports where ATA devices are actually present on port or the list of legal port
+ multiplier ports on that port. Regardless, the caller of this function must probe
+ the port number and port multiplier port number returned to see if an ATA device
+ is actually present.
+
+ The GetNextDevice() function retrieves the port multiplier port number of an ATA
+ device present on a port of an ATA controller.
+
+ If PortMultiplierPort points to a port multiplier port number value that was
+ returned on a previous call to GetNextDevice(), then the port multiplier port
+ number of the next ATA device on the port of the ATA controller is returned in
+ PortMultiplierPort, and EFI_SUCCESS is returned.
+
+ If PortMultiplierPort points to 0xFFFF, then the port multiplier port number
+ of the first ATA device on port of the ATA controller is returned in PortMultiplierPort
+ and EFI_SUCCESS is returned.
+
+ If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
+ was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
+ is returned.
+
+ If PortMultiplierPort is the port multiplier port number of the last ATA device
+ on the port of the ATA controller, then EFI_NOT_FOUND is returned.
+
+ @param[in] This The PPI instance pointer.
+ @param[in] Port The port number present on the ATA controller.
+ @param[in,out] PortMultiplierPort On input, a pointer to the port multiplier
+ port number of an ATA device present on the
+ ATA controller. If on input a PortMultiplierPort
+ of 0xFFFF is specified, then the port multiplier
+ port number of the first ATA device is returned.
+ On output, a pointer to the port multiplier port
+ number of the next ATA device present on an ATA
+ controller.
+
+ @retval EFI_SUCCESS The port multiplier port number of the next ATA
+ device on the port of the ATA controller was
+ returned in PortMultiplierPort.
+ @retval EFI_NOT_FOUND There are no more ATA devices on this port of
+ the ATA controller.
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort
+ was not returned on a previous call to GetNextDevice().
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_GET_NEXT_DEVICE) (
+ IN EDKII_PEI_ATA_PASS_THRU_PPI *This,
+ IN UINT16 Port,
+ IN OUT UINT16 *PortMultiplierPort
+ );
+
+/**
+ Gets the device path information of the underlying ATA host controller.
+
+ @param[in] This The PPI instance pointer.
+ @param[out] DevicePathLength The length of the device path in bytes specified
+ by DevicePath.
+ @param[out] DevicePath The device path of the underlying ATA host controller.
+ This field re-uses EFI Device Path Protocol as
+ defined by Section 10.2 EFI Device Path Protocol
+ of UEFI 2.7 Specification.
+
+ @retval EFI_SUCCESS The device path of the ATA host controller has
+ been successfully returned.
+ @retval EFI_INVALID_PARAMETER DevicePathLength or DevicePath is NULL.
+ @retval EFI_OUT_OF_RESOURCES Not enough resource to return the device path.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_ATA_PASS_THRU_GET_DEVICE_PATH) (
+ IN EDKII_PEI_ATA_PASS_THRU_PPI *This,
+ OUT UINTN *DevicePathLength,
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+//
+// EDKII_PEI_ATA_PASS_THRU_PPI provides the services that are required to send
+// ATA commands to an ATA device during PEI.
+//
+struct _EDKII_PEI_ATA_PASS_THRU_PPI {
+ UINT64 Revision;
+ EFI_ATA_PASS_THRU_MODE *Mode;
+ EDKII_PEI_ATA_PASS_THRU_PASSTHRU PassThru;
+ EDKII_PEI_ATA_PASS_THRU_THRU_GET_NEXT_PORT GetNextPort;
+ EDKII_PEI_ATA_PASS_THRU_GET_NEXT_DEVICE GetNextDevice;
+ EDKII_PEI_ATA_PASS_THRU_GET_DEVICE_PATH GetDevicePath;
+};
+
+extern EFI_GUID gEdkiiPeiAtaPassThruPpiGuid;
+
+#endif
--
2.12.0.windows.1
next prev parent reply other threads:[~2019-02-01 5:47 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 5:47 [PATCH v3 00/12] Split the S3 PEI phase HW init codes from Opal driver Hao Wu
2019-02-01 5:47 ` [PATCH v3 01/12] MdeModulePkg: Add definitions for ATA AHCI host controller PPI Hao Wu
2019-02-01 5:47 ` Hao Wu [this message]
2019-02-01 5:47 ` [PATCH v3 03/12] MdeModulePkg: Add definitions for Storage Security Command PPI Hao Wu
2019-02-01 5:47 ` [PATCH v3 04/12] MdeModulePkg: Add GUID for LockBox to save storage dev to init in S3 Hao Wu
2019-02-01 5:47 ` [PATCH v3 05/12] MdeModulePkg/NvmExpressPei: Avoid updating the module-level variable Hao Wu
2019-02-01 5:47 ` [PATCH v3 06/12] MdeModulePkg/NvmExpressPei: Add logic to produce SSC PPI Hao Wu
2019-02-01 5:47 ` [PATCH v3 07/12] MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox Hao Wu
2019-02-01 5:47 ` [PATCH v3 08/12] MdeModulePkg/AhciPei: Add AHCI mode ATA device support in PEI Hao Wu
2019-02-01 5:47 ` [PATCH v3 09/12] MdeModulePkg/SmmLockBoxLib: Use 'DEBUG_' prefix instead of 'EFI_D_' Hao Wu
2019-02-01 9:04 ` Laszlo Ersek
2019-02-01 5:47 ` [PATCH v3 10/12] MdeModulePkg/SmmLockBox(PEI): Remove an ASSERT in RestoreLockBox() Hao Wu
2019-02-01 9:17 ` Laszlo Ersek
2019-02-01 10:54 ` Wu, Hao A
2019-02-01 5:47 ` [PATCH v3 11/12] MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox() Hao Wu
2019-02-01 7:52 ` Ni, Ray
2019-02-01 9:39 ` Laszlo Ersek
2019-02-01 11:03 ` Wu, Hao A
2019-02-01 5:47 ` [PATCH v3 12/12] SecurityPkg/OpalPassword: Remove HW init codes and consume SSC PPI Hao Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201054728.8612-3-hao.a.wu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox