From: Ming Huang <ming.huang@linaro.org>
To: leif.lindholm@linaro.org, linaro-uefi@lists.linaro.org,
edk2-devel@lists.01.org, graeme.gregory@linaro.org
Cc: ard.biesheuvel@linaro.org, michael.d.kinney@intel.com,
lersek@redhat.com, wanghuiqiang@huawei.com,
huangming23@huawei.com, zhangjinsong2@huawei.com,
huangdaode@hisilicon.com, john.garry@huawei.com,
xinliang.liu@linaro.org, zhangfeng56@huawei.com,
Ming Huang <ming.huang@linaro.org>
Subject: [PATCH edk2-platforms v1 07/16] Hisilicon/D0x: Rename StartupAp() function
Date: Fri, 1 Feb 2019 21:34:27 +0800 [thread overview]
Message-ID: <20190201133436.10500-8-ming.huang@linaro.org> (raw)
In-Reply-To: <20190201133436.10500-1-ming.huang@linaro.org>
As suggestion of community, 'AP' is a bit unfortunate to use in EDK2
context. PI specifies 'BSP' for Boot-strap Processor, as the one
executing all of the EDK2 code. It then uses 'AP' to refer to
Additional Processors, which can be assigned tasks using the
EFI_MP_SERVICES_PROTOCOL. In a TianoCore context, this should be 'BSP'.
So, Rename StartupAp() to StartUpBSP.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
---
Silicon/Hisilicon/Include/Library/PlatformSysCtrlLib.h | 2 +-
Platform/Hisilicon/D03/EarlyConfigPeim/EarlyConfigPeimD03.c | 2 +-
Platform/Hisilicon/D03/Library/OemMiscLib2P/OemMiscLib2PHi1610.c | 2 +-
Platform/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.c | 2 +-
Platform/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.c | 3 ++-
Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c | 2 +-
6 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/Silicon/Hisilicon/Include/Library/PlatformSysCtrlLib.h b/Silicon/Hisilicon/Include/Library/PlatformSysCtrlLib.h
index a232e52ed719..712b77c44fc8 100644
--- a/Silicon/Hisilicon/Include/Library/PlatformSysCtrlLib.h
+++ b/Silicon/Hisilicon/Include/Library/PlatformSysCtrlLib.h
@@ -76,7 +76,7 @@ VOID MN_CONFIG (VOID);
VOID SmmuConfigForOS (VOID);
VOID SmmuConfigForBios (VOID);
-VOID StartupAp (VOID);
+VOID StartUpBSP (VOID);
VOID LlcCleanInvalidate (VOID);
diff --git a/Platform/Hisilicon/D03/EarlyConfigPeim/EarlyConfigPeimD03.c b/Platform/Hisilicon/D03/EarlyConfigPeim/EarlyConfigPeimD03.c
index 97cf6b8d8757..dacd9e871faf 100644
--- a/Platform/Hisilicon/D03/EarlyConfigPeim/EarlyConfigPeimD03.c
+++ b/Platform/Hisilicon/D03/EarlyConfigPeim/EarlyConfigPeimD03.c
@@ -83,7 +83,7 @@ void QResetAp(VOID)
//SCCL A
if (!PcdGet64 (PcdTrustedFirmwareEnable))
{
- StartupAp();
+ StartUpBSP ();
}
}
diff --git a/Platform/Hisilicon/D03/Library/OemMiscLib2P/OemMiscLib2PHi1610.c b/Platform/Hisilicon/D03/Library/OemMiscLib2P/OemMiscLib2PHi1610.c
index b57fdfa68e45..c8a9da73bbca 100644
--- a/Platform/Hisilicon/D03/Library/OemMiscLib2P/OemMiscLib2PHi1610.c
+++ b/Platform/Hisilicon/D03/Library/OemMiscLib2P/OemMiscLib2PHi1610.c
@@ -133,7 +133,7 @@ VOID CoreSelectBoot(VOID)
{
if (!PcdGet64 (PcdTrustedFirmwareEnable))
{
- StartupAp ();
+ StartUpBSP ();
}
return;
diff --git a/Platform/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.c b/Platform/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.c
index 76a055cbe980..b374347e5c4d 100644
--- a/Platform/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.c
+++ b/Platform/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.c
@@ -35,7 +35,7 @@ QResetAp (
(VOID)WriteBackInvalidateDataCacheRange((VOID *) FixedPcdGet64(PcdMailBoxAddress), 8);
if (!PcdGet64 (PcdTrustedFirmwareEnable)) {
- StartupAp();
+ StartUpBSP ();
}
}
diff --git a/Platform/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.c b/Platform/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.c
index 4c4c944dbead..a1458da7f0a3 100644
--- a/Platform/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.c
+++ b/Platform/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.c
@@ -96,7 +96,7 @@ UINTN OemGetDimmSlot(UINTN Socket, UINTN Channel)
VOID CoreSelectBoot(VOID)
{
if (!PcdGet64 (PcdTrustedFirmwareEnable)) {
- StartupAp ();
+ StartUpBSP ();
}
return;
@@ -128,3 +128,4 @@ BOOLEAN OemIsNeedDisableExpanderBuffer(VOID)
{
return TRUE;
}
+
diff --git a/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c b/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c
index 0790f7941ae7..a8261d370626 100644
--- a/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c
+++ b/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c
@@ -78,7 +78,7 @@ QResetAp (
//SCCL A
if (!PcdGet64 (PcdTrustedFirmwareEnable)) {
- StartupAp ();
+ StartUpBSP ();
}
}
--
2.9.5
next prev parent reply other threads:[~2019-02-01 13:35 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 13:34 [PATCH edk2-platforms v1 00/16] Fix issues and improve D0x Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 01/16] Hisilicon/D0x: Remove SerdesLib Ming Huang
2019-02-11 15:05 ` Leif Lindholm
2019-02-13 6:36 ` Ming Huang
2019-02-13 9:42 ` Leif Lindholm
2019-02-13 11:39 ` Ming Huang
2019-02-14 10:51 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 02/16] Hisilicon/D0x: Add DriverHealthManagerDxe Ming Huang
2019-02-11 15:20 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 03/16] Hisilicon/D06: Optimize SAS driver for reducing boot time Ming Huang
2019-02-12 15:12 ` Leif Lindholm
2019-02-13 6:01 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 04/16] Hisilicon/D06: Fix access variable fail issue Ming Huang
2019-02-12 15:17 ` Leif Lindholm
2019-02-13 2:21 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 05/16] Hisilicon/D06: Add more PCIe port INT-x support Ming Huang
2019-02-11 17:05 ` Leif Lindholm
2019-02-12 12:27 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 06/16] Hisilicon/D06: Add OemGetCpuFreq to encapsulate difference Ming Huang
2019-02-11 17:15 ` Leif Lindholm
2019-02-13 2:29 ` Ming Huang
2019-02-01 13:34 ` Ming Huang [this message]
2019-02-11 18:04 ` [PATCH edk2-platforms v1 07/16] Hisilicon/D0x: Rename StartupAp() function Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 08/16] Hisilicon/D06: Change HCCS speed from 30G to 26G Ming Huang
2019-02-11 18:36 ` Leif Lindholm
2019-02-12 14:45 ` Ming Huang
2019-02-12 14:59 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 09/16] Hisilicon/D06: Add PCI_OSC_SUPPORT Ming Huang
2019-02-11 18:51 ` Leif Lindholm
2019-02-13 2:59 ` Ming Huang
2019-02-13 9:08 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 10/16] Hisilicon/D06: Modify for M7 self-Adapte support Ming Huang
2019-02-11 19:28 ` Leif Lindholm
2019-02-12 15:14 ` Ming Huang
2019-02-12 15:46 ` Leif Lindholm
2019-02-13 4:38 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 11/16] Hisilicon/D06: Add Setup Item "Support DPC" Ming Huang
2019-02-11 19:46 ` Leif Lindholm
2019-02-12 15:22 ` Ming Huang
2019-02-12 15:49 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 12/16] Hisilicon/D06: Use new flash layout Ming Huang
2019-02-11 14:54 ` Leif Lindholm
2019-02-13 4:43 ` Ming Huang
2019-02-01 13:34 ` [PATCH edk2-platforms v1 13/16] Hisilicon/D06: Remove SECURE_BOOT_ENABLE definition Ming Huang
2019-02-11 19:47 ` Leif Lindholm
2019-02-01 13:34 ` [PATCH edk2-platforms v1 14/16] Hisilicon/D0x: Remove SP805 watchdog pcd Ming Huang
2019-02-11 19:48 ` Leif Lindholm
2019-02-15 14:18 ` [PATCH edk2-platforms v1 00/16] Fix issues and improve D0x Ming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201133436.10500-8-ming.huang@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox