From: Christopher J Zurcher <christopher.j.zurcher@intel.com>
To: edk2-devel@lists.01.org
Cc: Christopher J Zurcher <christopher.j.zurcher@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Jian J Wang <jian.j.wang@intel.com>,
Liming Gao <liming.gao@intel.com>
Subject: [PATCH v2 2/2] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol
Date: Wed, 20 Feb 2019 16:58:20 -0800 [thread overview]
Message-ID: <20190221005820.32580-3-christopher.j.zurcher@intel.com> (raw)
In-Reply-To: <20190221005820.32580-1-christopher.j.zurcher@intel.com>
This patch implements the EFI_STORAGE_SECURITY_COMMAND_PROTOCOL in the
ScsiDiskDxe driver.
Support is currently limited to the RPMB Well-known LUN for UFS devices.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 3 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 171 +++++++-
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c | 5 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c | 14 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 510 +++++++++++++++++++++-
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 19 +-
6 files changed, 698 insertions(+), 24 deletions(-)
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
index 14010802a8..2122aa4b01 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
@@ -3,7 +3,7 @@
# It detects the SCSI disk media and installs Block I/O and Block I/O2 Protocol on
# the device handle.
#
-# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -58,6 +58,7 @@
gEfiBlockIoProtocolGuid ## BY_START
gEfiBlockIo2ProtocolGuid ## BY_START
gEfiEraseBlockProtocolGuid ## BY_START
+ gEfiStorageSecurityCommandProtocolGuid ## BY_START
gEfiScsiIoProtocolGuid ## TO_START
gEfiScsiPassThruProtocolGuid ## TO_START
gEfiExtScsiPassThruProtocolGuid ## TO_START
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
index bb6232676d..4731258018 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
@@ -1,7 +1,7 @@
/** @file
Header file for SCSI Disk Driver.
-Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -28,6 +28,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include <Protocol/ScsiPassThruExt.h>
#include <Protocol/ScsiPassThru.h>
#include <Protocol/DiskInfo.h>
+#include <Protocol/StorageSecurityCommand.h>
#include <Library/DebugLib.h>
@@ -44,6 +45,10 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#define IS_DEVICE_FIXED(a) (a)->FixedDevice ? 1 : 0
+#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0)
+
+#define UFS_WLUN_RPMB 0xC4
+
typedef struct {
UINT32 MaxLbaCnt;
UINT32 MaxBlkDespCnt;
@@ -57,6 +62,8 @@ typedef struct {
EFI_HANDLE Handle;
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL StorageSecurity;
+
EFI_BLOCK_IO_PROTOCOL BlkIo;
EFI_BLOCK_IO2_PROTOCOL BlkIo2;
EFI_BLOCK_IO_MEDIA BlkIoMedia;
@@ -101,6 +108,7 @@ typedef struct {
#define SCSI_DISK_DEV_FROM_BLKIO(a) CR (a, SCSI_DISK_DEV, BlkIo, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_BLKIO2(a) CR (a, SCSI_DISK_DEV, BlkIo2, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_ERASEBLK(a) CR (a, SCSI_DISK_DEV, EraseBlock, SCSI_DISK_DEV_SIGNATURE)
+#define SCSI_DISK_DEV_FROM_STORSEC(a) CR (a, SCSI_DISK_DEV, StorageSecurity, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_DISKINFO(a) CR (a, SCSI_DISK_DEV, DiskInfo, SCSI_DISK_DEV_SIGNATURE)
@@ -644,6 +652,151 @@ ScsiDiskEraseBlocks (
);
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ );
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskSendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer
+ );
+
+
/**
Provides inquiry information for the controller type.
@@ -1434,4 +1587,20 @@ DetermineInstallEraseBlock (
IN EFI_HANDLE ChildHandle
);
+/**
+ Determine if EFI Storage Security Command Protocol should be produced.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Handle of device.
+
+ @retval TRUE Should produce EFI Storage Security Command Protocol.
+ @retval FALSE Should not produce EFI Storage Security Command Protocol.
+
+**/
+BOOLEAN
+DetermineInstallStorageSecurity (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ );
+
#endif
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
index 11a7f2a927..0b4c51764e 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
@@ -2,7 +2,7 @@
SCSI Bus driver that layers on every SCSI Pass Thru and
Extended SCSI Pass Thru protocol in the system.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -1374,7 +1374,8 @@ DiscoverScsiDevice (
goto Done;
}
- if (0x1e >= InquiryData->Peripheral_Type && InquiryData->Peripheral_Type >= 0xa) {
+ if ((InquiryData->Peripheral_Type >= EFI_SCSI_TYPE_RESERVED_LOW) &&
+ (InquiryData->Peripheral_Type <= EFI_SCSI_TYPE_RESERVED_HIGH)) {
ScsiDeviceFound = FALSE;
goto Done;
}
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c
index f2da7af8fb..cba833d4ca 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ComponentName.c
@@ -1,7 +1,7 @@
/** @file
UEFI Component Name(2) protocol implementation for SCSI disk driver.
-Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -173,9 +173,9 @@ ScsiDiskComponentNameGetControllerName (
OUT CHAR16 **ControllerName
)
{
- EFI_STATUS Status;
- SCSI_DISK_DEV *ScsiDiskDevice;
- EFI_BLOCK_IO_PROTOCOL *BlockIo;
+ EFI_STATUS Status;
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_DISK_INFO_PROTOCOL *DiskInfo;
//
// This is a device driver, so ChildHandle must be NULL.
@@ -200,8 +200,8 @@ ScsiDiskComponentNameGetControllerName (
//
Status = gBS->OpenProtocol (
ControllerHandle,
- &gEfiBlockIoProtocolGuid,
- (VOID **) &BlockIo,
+ &gEfiDiskInfoProtocolGuid,
+ (VOID **) &DiskInfo,
gScsiDiskDriverBinding.DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
@@ -211,7 +211,7 @@ ScsiDiskComponentNameGetControllerName (
return Status;
}
- ScsiDiskDevice = SCSI_DISK_DEV_FROM_BLKIO (BlockIo);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_DISKINFO (DiskInfo);
return LookupUnicodeString2 (
Language,
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
index 0d63c85e44..75eb13ca20 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
@@ -1,7 +1,7 @@
/** @file
SCSI disk driver that layers on every SCSI IO protocol in the system.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -157,7 +157,9 @@ ScsiDiskDriverBindingSupported (
Status = ScsiIo->GetDeviceType (ScsiIo, &DeviceType);
if (!EFI_ERROR (Status)) {
- if ((DeviceType == EFI_SCSI_TYPE_DISK) || (DeviceType == EFI_SCSI_TYPE_CDROM)) {
+ if ((DeviceType == EFI_SCSI_TYPE_DISK) ||
+ (DeviceType == EFI_SCSI_TYPE_CDROM) ||
+ (DeviceType == EFI_SCSI_TYPE_WLUN)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_UNSUPPORTED;
@@ -244,6 +246,8 @@ ScsiDiskDriverBindingStart (
ScsiDiskDevice->BlkIo2.ReadBlocksEx = ScsiDiskReadBlocksEx;
ScsiDiskDevice->BlkIo2.WriteBlocksEx = ScsiDiskWriteBlocksEx;
ScsiDiskDevice->BlkIo2.FlushBlocksEx = ScsiDiskFlushBlocksEx;
+ ScsiDiskDevice->StorageSecurity.ReceiveData = ScsiDiskReceiveData;
+ ScsiDiskDevice->StorageSecurity.SendData = ScsiDiskSendData;
ScsiDiskDevice->EraseBlock.Revision = EFI_ERASE_BLOCK_PROTOCOL_REVISION;
ScsiDiskDevice->EraseBlock.EraseLengthGranularity = 1;
ScsiDiskDevice->EraseBlock.EraseBlocks = ScsiDiskEraseBlocks;
@@ -264,6 +268,10 @@ ScsiDiskDriverBindingStart (
ScsiDiskDevice->BlkIo.Media->ReadOnly = TRUE;
MustReadCapacity = FALSE;
break;
+
+ case EFI_SCSI_TYPE_WLUN:
+ MustReadCapacity = FALSE;
+ break;
}
//
// The Sense Data Array's initial size is 6
@@ -311,11 +319,45 @@ ScsiDiskDriverBindingStart (
//
Status = ScsiDiskDetectMedia (ScsiDiskDevice, MustReadCapacity, &Temp);
if (!EFI_ERROR (Status)) {
+
+ //
+ // Determine if StorageSecurity should be produced on this controller
+ //
+ if (DetermineInstallStorageSecurity(ScsiDiskDevice, Controller) &&
+ DetermineInstallBlockIo(Controller)) {
+ InitializeInstallDiskInfo(ScsiDiskDevice, Controller);
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &gEfiDiskInfoProtocolGuid,
+ &ScsiDiskDevice->DiskInfo,
+ NULL
+ );
+ if (!EFI_ERROR(Status)) {
+ ScsiDiskDevice->ControllerNameTable = NULL;
+ AddUnicodeString2 (
+ "eng",
+ gScsiDiskComponentName.SupportedLanguages,
+ &ScsiDiskDevice->ControllerNameTable,
+ L"SCSI Secure Disk Device",
+ TRUE
+ );
+ AddUnicodeString2 (
+ "en",
+ gScsiDiskComponentName2.SupportedLanguages,
+ &ScsiDiskDevice->ControllerNameTable,
+ L"SCSI Secure Disk Device",
+ FALSE
+ );
+ return EFI_SUCCESS;
+ }
+
//
// Determine if Block IO & Block IO2 should be produced on this controller
// handle
//
- if (DetermineInstallBlockIo(Controller)) {
+ } else if (DetermineInstallBlockIo(Controller)) {
InitializeInstallDiskInfo(ScsiDiskDevice, Controller);
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
@@ -1714,6 +1756,396 @@ Done:
return Status;
}
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ BOOLEAN MediaChange;
+ EFI_TPL OldTpl;
+ UINT8 SenseDataLength;
+ UINT8 HostAdapterStatus;
+ UINT8 TargetStatus;
+ VOID *AlignedBuffer;
+ BOOLEAN AlignedBufferAllocated;
+
+ MediaChange = FALSE;
+ AlignedBufferAllocated = FALSE;
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_STORSEC (This);
+ Media = ScsiDiskDevice->BlkIo.Media;
+
+ SenseDataLength = (UINT8) (ScsiDiskDevice->SenseDataNumber * sizeof (EFI_SCSI_SENSE_DATA));
+
+ if (!DetermineInstallStorageSecurity(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ if (!IS_DEVICE_FIXED(ScsiDiskDevice)) {
+ Status = ScsiDiskDetectMedia (ScsiDiskDevice, FALSE, &MediaChange);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ if (MediaChange) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ if (Media->MediaPresent) {
+ Status = EFI_MEDIA_CHANGED;
+ } else {
+ Status = EFI_NO_MEDIA;
+ }
+ goto Done;
+ }
+ }
+
+ //
+ // Validate Media
+ //
+ if (!(Media->MediaPresent)) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+
+ if ((MediaId != 0) && (MediaId != Media->MediaId)) {
+ Status = EFI_MEDIA_CHANGED;
+ goto Done;
+ }
+
+ if (PayloadBufferSize != 0) {
+ if ((PayloadBuffer == NULL) || (PayloadTransferSize == NULL)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ if ((ScsiDiskDevice->ScsiIo->IoAlign > 1) && !IS_ALIGNED(PayloadBuffer, ScsiDiskDevice->ScsiIo->IoAlign)) {
+ AlignedBuffer = AllocateAlignedBuffer (ScsiDiskDevice, PayloadBufferSize);
+ if (AlignedBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ AlignedBufferAllocated = TRUE;
+ } else {
+ AlignedBuffer = PayloadBuffer;
+ }
+ }
+
+ Status = ScsiSecurityProtocolInCommand (
+ ScsiDiskDevice->ScsiIo,
+ Timeout,
+ ScsiDiskDevice->SenseData,
+ &SenseDataLength,
+ &HostAdapterStatus,
+ &TargetStatus,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ (UINT32) PayloadBufferSize,
+ AlignedBuffer,
+ (UINT32 *) PayloadTransferSize
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ if (AlignedBufferAllocated) {
+ CopyMem (PayloadBuffer, AlignedBuffer, PayloadBufferSize);
+ }
+
+ if (PayloadBufferSize < *PayloadTransferSize) {
+ Status = EFI_WARN_BUFFER_TOO_SMALL;
+ goto Done;
+ }
+
+ Status = CheckHostAdapterStatus (HostAdapterStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckTargetStatus (TargetStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (AlignedBufferAllocated) {
+ FreeAlignedBuffer (AlignedBuffer, PayloadBufferSize);
+ }
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskSendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ BOOLEAN MediaChange;
+ EFI_TPL OldTpl;
+ UINT8 SenseDataLength;
+ UINT8 HostAdapterStatus;
+ UINT8 TargetStatus;
+ VOID *AlignedBuffer;
+ BOOLEAN AlignedBufferAllocated;
+
+ MediaChange = FALSE;
+ AlignedBufferAllocated = FALSE;
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_STORSEC (This);
+ Media = ScsiDiskDevice->BlkIo.Media;
+
+ SenseDataLength = (UINT8) (ScsiDiskDevice->SenseDataNumber * sizeof (EFI_SCSI_SENSE_DATA));
+
+ if (!DetermineInstallStorageSecurity(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ if (!IS_DEVICE_FIXED(ScsiDiskDevice)) {
+ Status = ScsiDiskDetectMedia (ScsiDiskDevice, FALSE, &MediaChange);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ if (MediaChange) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ if (Media->MediaPresent) {
+ Status = EFI_MEDIA_CHANGED;
+ } else {
+ Status = EFI_NO_MEDIA;
+ }
+ goto Done;
+ }
+ }
+
+ //
+ // Validate Media
+ //
+ if (!(Media->MediaPresent)) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+
+ if ((MediaId != 0) && (MediaId != Media->MediaId)) {
+ Status = EFI_MEDIA_CHANGED;
+ goto Done;
+ }
+
+ if (Media->ReadOnly) {
+ Status = EFI_WRITE_PROTECTED;
+ goto Done;
+ }
+
+ if ((PayloadBuffer == NULL) && (PayloadBufferSize != 0)) {
+ DEBUG ((DEBUG_ERROR, "ScsiDiskSendData: PayloadBuffer NULL!\n"));
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+ if (PayloadBufferSize != 0) {
+ if (PayloadBuffer == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ if ((ScsiDiskDevice->ScsiIo->IoAlign > 1) && !IS_ALIGNED(PayloadBuffer, ScsiDiskDevice->ScsiIo->IoAlign)) {
+ AlignedBuffer = AllocateAlignedBuffer (ScsiDiskDevice, PayloadBufferSize);
+ if (AlignedBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ CopyMem (AlignedBuffer, PayloadBuffer, PayloadBufferSize);
+ AlignedBufferAllocated = TRUE;
+ } else {
+ AlignedBuffer = PayloadBuffer;
+ }
+ }
+
+ Status = ScsiSecurityProtocolOutCommand (
+ ScsiDiskDevice->ScsiIo,
+ Timeout,
+ ScsiDiskDevice->SenseData,
+ &SenseDataLength,
+ &HostAdapterStatus,
+ &TargetStatus,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ (UINT32) PayloadBufferSize,
+ AlignedBuffer
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckHostAdapterStatus (HostAdapterStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckTargetStatus (TargetStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (AlignedBufferAllocated) {
+ FreeAlignedBuffer (AlignedBuffer, PayloadBufferSize);
+ }
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
/**
Detect Device and read out capacity ,if error occurs, parse the sense key.
@@ -2267,6 +2699,8 @@ ScsiDiskTestUnitReady (
return EFI_DEVICE_ERROR;
}
+ ScsiDiskDevice->BlkIo.Media->MediaPresent = TRUE;
+
if (SenseDataLength != 0) {
*NumberOfSenseKeys = SenseDataLength / sizeof (EFI_SCSI_SENSE_DATA);
*SenseDataArray = ScsiDiskDevice->SenseData;
@@ -2321,13 +2755,12 @@ DetectMediaParsingSenseKeys (
BOOLEAN RetryLater;
//
- // Default is to read capacity, unless..
+ // Default is no action
//
- *Action = ACTION_READ_CAPACITY;
+ *Action = ACTION_NO_ACTION;
if (NumberOfSenseKeys == 0) {
if (ScsiDiskDevice->BlkIo.Media->MediaPresent == TRUE) {
- *Action = ACTION_NO_ACTION;
}
return EFI_SUCCESS;
}
@@ -2337,7 +2770,6 @@ DetectMediaParsingSenseKeys (
// No Sense Key returned from last submitted command
//
if (ScsiDiskDevice->BlkIo.Media->MediaPresent == TRUE) {
- *Action = ACTION_NO_ACTION;
}
return EFI_SUCCESS;
}
@@ -2345,13 +2777,13 @@ DetectMediaParsingSenseKeys (
if (ScsiDiskIsNoMedia (SenseData, NumberOfSenseKeys)) {
ScsiDiskDevice->BlkIo.Media->MediaPresent = FALSE;
ScsiDiskDevice->BlkIo.Media->LastBlock = 0;
- *Action = ACTION_NO_ACTION;
DEBUG ((EFI_D_VERBOSE, "ScsiDisk: ScsiDiskIsNoMedia\n"));
return EFI_SUCCESS;
}
if (ScsiDiskIsMediaChange (SenseData, NumberOfSenseKeys)) {
ScsiDiskDevice->BlkIo.Media->MediaId++;
+ *Action = ACTION_READ_CAPACITY;
DEBUG ((EFI_D_VERBOSE, "ScsiDisk: ScsiDiskIsMediaChange!\n"));
return EFI_SUCCESS;
}
@@ -2380,7 +2812,6 @@ DetectMediaParsingSenseKeys (
DEBUG ((EFI_D_VERBOSE, "ScsiDisk: ScsiDiskDriveNotReady!\n"));
return EFI_SUCCESS;
}
- *Action = ACTION_NO_ACTION;
return EFI_DEVICE_ERROR;
}
@@ -2814,8 +3245,6 @@ GetMediaInfo (
}
}
}
-
- ScsiDiskDevice->BlkIo.Media->MediaPresent = TRUE;
}
/**
@@ -5466,6 +5895,65 @@ Done:
return RetVal;
}
+/**
+ Determine if EFI Storage Security Command Protocol should be produced.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Handle of device.
+
+ @retval TRUE Should produce EFI Storage Security Command Protocol.
+ @retval FALSE Should not produce EFI Storage Security Command Protocol.
+
+**/
+BOOLEAN
+DetermineInstallStorageSecurity (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ )
+{
+ EFI_STATUS Status;
+ UFS_DEVICE_PATH *UfsDevice;
+ BOOLEAN RetVal;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathNode;
+
+ UfsDevice = NULL;
+ RetVal = TRUE;
+
+ Status = gBS->HandleProtocol (
+ ChildHandle,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &DevicePathNode
+ );
+ //
+ // Device Path protocol must be installed on the device handle.
+ //
+ ASSERT_EFI_ERROR (Status);
+
+ while (!IsDevicePathEndType (DevicePathNode)) {
+ //
+ // For now, only support Storage Security Command Protocol on UFS devices.
+ //
+ if ((DevicePathNode->Type == MESSAGING_DEVICE_PATH) &&
+ (DevicePathNode->SubType == MSG_UFS_DP)) {
+ UfsDevice = (UFS_DEVICE_PATH *) DevicePathNode;
+ break;
+ }
+
+ DevicePathNode = NextDevicePathNode (DevicePathNode);
+ }
+ if (UfsDevice == NULL) {
+ RetVal = FALSE;
+ goto Done;
+ }
+
+ if (UfsDevice->Lun != UFS_WLUN_RPMB) {
+ RetVal = FALSE;
+ }
+
+Done:
+ return RetVal;
+}
+
/**
Provides inquiry information for the controller type.
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
index ea329618dc..6ed5da21fd 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
@@ -1,6 +1,6 @@
/** @file
- Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2014 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -825,7 +825,9 @@ UfsPassThruDriverBindingStart (
UINTN UfsHcBase;
UINT32 Index;
UFS_UNIT_DESC UnitDescriptor;
+ UFS_DEV_DESC DeviceDescriptor;
UINT32 UnitDescriptorSize;
+ UINT32 DeviceDescriptorSize;
Status = EFI_SUCCESS;
UfsHc = NULL;
@@ -900,7 +902,6 @@ UfsPassThruDriverBindingStart (
//
// Check if 8 common luns are active and set corresponding bit mask.
- // TODO: Parse device descriptor to decide if exposing RPMB LUN to upper layer for authentication access.
//
UnitDescriptorSize = sizeof (UFS_UNIT_DESC);
for (Index = 0; Index < 8; Index++) {
@@ -915,6 +916,20 @@ UfsPassThruDriverBindingStart (
}
}
+ //
+ // Check if RPMB WLUN is supported and set corresponding bit mask.
+ //
+ DeviceDescriptorSize = sizeof (UFS_DEV_DESC);
+ Status = UfsRwDeviceDesc (Private, TRUE, UfsDeviceDesc, 0, 0, &DeviceDescriptor, &DeviceDescriptorSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to read device descriptor, status = %r\n", Status));
+ } else {
+ if (DeviceDescriptor.SecurityLun == 0x1) {
+ DEBUG ((DEBUG_INFO, "UFS WLUN RPMB is supported\n"));
+ Private->Luns.BitMask |= BIT11;
+ }
+ }
+
//
// Start the asynchronous interrupt monitor
//
--
2.16.2.windows.1
prev parent reply other threads:[~2019-02-21 0:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-21 0:58 [PATCH v2 0/2] Add SCSI Support for Storage Security Christopher J Zurcher
2019-02-21 0:58 ` [PATCH v2 1/2] MdePkg: Implement SCSI commands for Security Protocol In/Out Christopher J Zurcher
2019-02-21 0:58 ` Christopher J Zurcher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190221005820.32580-3-christopher.j.zurcher@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox