* [Patch] Document: Update Dsc spec to all empty value for HIIPcd
@ 2019-02-28 2:11 Feng, Bob C
2019-02-28 15:45 ` Carsey, Jaben
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Feng, Bob C @ 2019-02-28 2:11 UTC (permalink / raw)
To: edk2-devel; +Cc: Bob Feng, Liming Gao
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
Update Dsc spec to all empty value for HIIPcd.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
---
2_dsc_overview/29_pcd_sections.md | 4 ++--
3_edk_ii_dsc_file_format/310_pcd_sections.md | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/2_dsc_overview/29_pcd_sections.md b/2_dsc_overview/29_pcd_sections.md
index 791125f..d84d2f4 100644
--- a/2_dsc_overview/29_pcd_sections.md
+++ b/2_dsc_overview/29_pcd_sections.md
@@ -230,11 +230,11 @@ example:
`[PcdsDynamicHii.common.Sku1]`
While the format for content of this section is as follows, note that the
backslash character is used here to indicate the continuation of the line:
-`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|HiiDefaultValue[|HiiAttrubte]]`
+`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|[HiiDefaultValue][|HiiAttrubte]]`
For VOID* PCDs, the HiiDefaultValue will be a pointer; specifying the optional
HiiDefaultValue has no meaning.
The optional HII Attribute entry is a comma separated list of attributes as
@@ -340,11 +340,11 @@ Specifying a `SKUID` for an HII PCD selection is optional, for example:
`[PcdsDynamicExHii.common.Sku1]`
While the format for content of this section is as follows, note that the
backslash character is used here to indicate the continuation of the line:
-`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|HiiDefaultValue]`
+`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|[HiiDefaultValue]]`
The optional HII Attribute entry is a comma separated list of attributes as
described in Table 9 HII Attributes.
**Note:** The VariableName field in the HII format PCD entry must not be an empty string.
diff --git a/3_edk_ii_dsc_file_format/310_pcd_sections.md b/3_edk_ii_dsc_file_format/310_pcd_sections.md
index f9f1359..f982d60 100644
--- a/3_edk_ii_dsc_file_format/310_pcd_sections.md
+++ b/3_edk_ii_dsc_file_format/310_pcd_sections.md
@@ -503,11 +503,11 @@ sections of the DSC file.
<VpdMaxSize> ::= {<IntNum>} {<UINT16>} [<FS> <StringValue>]
<HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
<HiiString> ::= {<CArray>} {<UnicodeString>}
<Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
<VariableGuid> ::= <CName>
-<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
+<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
<VariableOffset> ::= <Number>
<DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
{<BoolType>} {<Expression>}
elif (pcddatumtype == "UINT8"):
{<NumValUint8>} {<Expression>}
@@ -721,11 +721,11 @@ sections of the DSC file.
<VpdMaxSize> ::= {<LongNum>} {<UINT32>} [<FS> <StringValue>]
<HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
<HiiString> ::= {<CArray>} {<UnicodeString>}
<Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
<VariableGuid> ::= <CName>
-<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
+<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
<VariableOffset> ::= <Number>
<DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
{<BoolType>} {<Expression>}
elif (pcddatumtype == "UINT8"):
{<NumValUint8>} {<Expression>}
--
2.20.1.windows.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Patch] Document: Update Dsc spec to all empty value for HIIPcd
2019-02-28 2:11 [Patch] Document: Update Dsc spec to all empty value for HIIPcd Feng, Bob C
@ 2019-02-28 15:45 ` Carsey, Jaben
2019-03-01 2:58 ` Feng, Bob C
2019-03-01 3:00 ` Feng, Bob C
2 siblings, 0 replies; 4+ messages in thread
From: Carsey, Jaben @ 2019-02-28 15:45 UTC (permalink / raw)
To: Feng, Bob C, edk2-devel@lists.01.org; +Cc: Gao, Liming
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Feng, Bob C
> Sent: Wednesday, February 27, 2019 6:11 PM
> To: edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: [edk2] [Patch] Document: Update Dsc spec to all empty value for
> HIIPcd
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=1466
>
> Update Dsc spec to all empty value for HIIPcd.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Bob Feng <bob.c.feng@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> ---
> 2_dsc_overview/29_pcd_sections.md | 4 ++--
> 3_edk_ii_dsc_file_format/310_pcd_sections.md | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/2_dsc_overview/29_pcd_sections.md
> b/2_dsc_overview/29_pcd_sections.md
> index 791125f..d84d2f4 100644
> --- a/2_dsc_overview/29_pcd_sections.md
> +++ b/2_dsc_overview/29_pcd_sections.md
> @@ -230,11 +230,11 @@ example:
> `[PcdsDynamicHii.common.Sku1]`
>
> While the format for content of this section is as follows, note that the
> backslash character is used here to indicate the continuation of the line:
>
> -
> `PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|Varia
> bleOffset[|HiiDefaultValue[|HiiAttrubte]]`
> +`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|Vari
> ableOffset[|[HiiDefaultValue][|HiiAttrubte]]`
>
> For VOID* PCDs, the HiiDefaultValue will be a pointer; specifying the
> optional
> HiiDefaultValue has no meaning.
>
> The optional HII Attribute entry is a comma separated list of attributes as
> @@ -340,11 +340,11 @@ Specifying a `SKUID` for an HII PCD selection is
> optional, for example:
> `[PcdsDynamicExHii.common.Sku1]`
>
> While the format for content of this section is as follows, note that the
> backslash character is used here to indicate the continuation of the line:
>
> -
> `PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|Varia
> bleOffset[|HiiDefaultValue]`
> +`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|Vari
> ableOffset[|[HiiDefaultValue]]`
>
> The optional HII Attribute entry is a comma separated list of attributes as
> described in Table 9 HII Attributes.
>
> **Note:** The VariableName field in the HII format PCD entry must not be
> an empty string.
> diff --git a/3_edk_ii_dsc_file_format/310_pcd_sections.md
> b/3_edk_ii_dsc_file_format/310_pcd_sections.md
> index f9f1359..f982d60 100644
> --- a/3_edk_ii_dsc_file_format/310_pcd_sections.md
> +++ b/3_edk_ii_dsc_file_format/310_pcd_sections.md
> @@ -503,11 +503,11 @@ sections of the DSC file.
> <VpdMaxSize> ::= {<IntNum>} {<UINT16>} [<FS> <StringValue>]
> <HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
> <HiiString> ::= {<CArray>} {<UnicodeString>}
> <Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
> <VariableGuid> ::= <CName>
> -<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
> +<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
> <VariableOffset> ::= <Number>
> <DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
> {<BoolType>} {<Expression>}
> elif (pcddatumtype == "UINT8"):
> {<NumValUint8>} {<Expression>}
> @@ -721,11 +721,11 @@ sections of the DSC file.
> <VpdMaxSize> ::= {<LongNum>} {<UINT32>} [<FS> <StringValue>]
> <HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
> <HiiString> ::= {<CArray>} {<UnicodeString>}
> <Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
> <VariableGuid> ::= <CName>
> -<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
> +<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
> <VariableOffset> ::= <Number>
> <DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
> {<BoolType>} {<Expression>}
> elif (pcddatumtype == "UINT8"):
> {<NumValUint8>} {<Expression>}
> --
> 2.20.1.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Patch] Document: Update Dsc spec to all empty value for HIIPcd
2019-02-28 2:11 [Patch] Document: Update Dsc spec to all empty value for HIIPcd Feng, Bob C
2019-02-28 15:45 ` Carsey, Jaben
@ 2019-03-01 2:58 ` Feng, Bob C
2019-03-01 3:00 ` Feng, Bob C
2 siblings, 0 replies; 4+ messages in thread
From: Feng, Bob C @ 2019-03-01 2:58 UTC (permalink / raw)
To: edk2-devel@lists.01.org; +Cc: Gao, Liming
Would you give the reviewed-by?
-----Original Message-----
From: Feng, Bob C
Sent: Thursday, February 28, 2019 10:11 AM
To: edk2-devel@lists.01.org
Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
Subject: [Patch] Document: Update Dsc spec to all empty value for HIIPcd
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
Update Dsc spec to all empty value for HIIPcd.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
---
2_dsc_overview/29_pcd_sections.md | 4 ++--
3_edk_ii_dsc_file_format/310_pcd_sections.md | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/2_dsc_overview/29_pcd_sections.md b/2_dsc_overview/29_pcd_sections.md
index 791125f..d84d2f4 100644
--- a/2_dsc_overview/29_pcd_sections.md
+++ b/2_dsc_overview/29_pcd_sections.md
@@ -230,11 +230,11 @@ example:
`[PcdsDynamicHii.common.Sku1]`
While the format for content of this section is as follows, note that the backslash character is used here to indicate the continuation of the line:
-`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|HiiDefaultValue[|HiiAttrubte]]`
+`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffs
+et[|[HiiDefaultValue][|HiiAttrubte]]`
For VOID* PCDs, the HiiDefaultValue will be a pointer; specifying the optional HiiDefaultValue has no meaning.
The optional HII Attribute entry is a comma separated list of attributes as @@ -340,11 +340,11 @@ Specifying a `SKUID` for an HII PCD selection is optional, for example:
`[PcdsDynamicExHii.common.Sku1]`
While the format for content of this section is as follows, note that the backslash character is used here to indicate the continuation of the line:
-`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|HiiDefaultValue]`
+`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffs
+et[|[HiiDefaultValue]]`
The optional HII Attribute entry is a comma separated list of attributes as described in Table 9 HII Attributes.
**Note:** The VariableName field in the HII format PCD entry must not be an empty string.
diff --git a/3_edk_ii_dsc_file_format/310_pcd_sections.md b/3_edk_ii_dsc_file_format/310_pcd_sections.md
index f9f1359..f982d60 100644
--- a/3_edk_ii_dsc_file_format/310_pcd_sections.md
+++ b/3_edk_ii_dsc_file_format/310_pcd_sections.md
@@ -503,11 +503,11 @@ sections of the DSC file.
<VpdMaxSize> ::= {<IntNum>} {<UINT16>} [<FS> <StringValue>]
<HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
<HiiString> ::= {<CArray>} {<UnicodeString>}
<Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
<VariableGuid> ::= <CName>
-<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
+<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
<VariableOffset> ::= <Number>
<DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
{<BoolType>} {<Expression>}
elif (pcddatumtype == "UINT8"):
{<NumValUint8>} {<Expression>} @@ -721,11 +721,11 @@ sections of the DSC file.
<VpdMaxSize> ::= {<LongNum>} {<UINT32>} [<FS> <StringValue>]
<HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
<HiiString> ::= {<CArray>} {<UnicodeString>}
<Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
<VariableGuid> ::= <CName>
-<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
+<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
<VariableOffset> ::= <Number>
<DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
{<BoolType>} {<Expression>}
elif (pcddatumtype == "UINT8"):
{<NumValUint8>} {<Expression>}
--
2.20.1.windows.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Patch] Document: Update Dsc spec to all empty value for HIIPcd
2019-02-28 2:11 [Patch] Document: Update Dsc spec to all empty value for HIIPcd Feng, Bob C
2019-02-28 15:45 ` Carsey, Jaben
2019-03-01 2:58 ` Feng, Bob C
@ 2019-03-01 3:00 ` Feng, Bob C
2 siblings, 0 replies; 4+ messages in thread
From: Feng, Bob C @ 2019-03-01 3:00 UTC (permalink / raw)
To: edk2-devel@lists.01.org; +Cc: Gao, Liming
Please ignore this mail. Sorry.
-----Original Message-----
From: Feng, Bob C
Sent: Friday, March 1, 2019 10:59 AM
To: edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: RE: [Patch] Document: Update Dsc spec to all empty value for HIIPcd
Would you give the reviewed-by?
-----Original Message-----
From: Feng, Bob C
Sent: Thursday, February 28, 2019 10:11 AM
To: edk2-devel@lists.01.org
Cc: Feng, Bob C <bob.c.feng@intel.com>; Gao, Liming <liming.gao@intel.com>
Subject: [Patch] Document: Update Dsc spec to all empty value for HIIPcd
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
Update Dsc spec to all empty value for HIIPcd.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
---
2_dsc_overview/29_pcd_sections.md | 4 ++--
3_edk_ii_dsc_file_format/310_pcd_sections.md | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/2_dsc_overview/29_pcd_sections.md b/2_dsc_overview/29_pcd_sections.md
index 791125f..d84d2f4 100644
--- a/2_dsc_overview/29_pcd_sections.md
+++ b/2_dsc_overview/29_pcd_sections.md
@@ -230,11 +230,11 @@ example:
`[PcdsDynamicHii.common.Sku1]`
While the format for content of this section is as follows, note that the backslash character is used here to indicate the continuation of the line:
-`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|HiiDefaultValue[|HiiAttrubte]]`
+`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffs
+et[|[HiiDefaultValue][|HiiAttrubte]]`
For VOID* PCDs, the HiiDefaultValue will be a pointer; specifying the optional HiiDefaultValue has no meaning.
The optional HII Attribute entry is a comma separated list of attributes as @@ -340,11 +340,11 @@ Specifying a `SKUID` for an HII PCD selection is optional, for example:
`[PcdsDynamicExHii.common.Sku1]`
While the format for content of this section is as follows, note that the backslash character is used here to indicate the continuation of the line:
-`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffset[|HiiDefaultValue]`
+`PcdTokenSpaceGuidCName.PcdCName|VariableName|VariableGuid|VariableOffs
+et[|[HiiDefaultValue]]`
The optional HII Attribute entry is a comma separated list of attributes as described in Table 9 HII Attributes.
**Note:** The VariableName field in the HII format PCD entry must not be an empty string.
diff --git a/3_edk_ii_dsc_file_format/310_pcd_sections.md b/3_edk_ii_dsc_file_format/310_pcd_sections.md
index f9f1359..f982d60 100644
--- a/3_edk_ii_dsc_file_format/310_pcd_sections.md
+++ b/3_edk_ii_dsc_file_format/310_pcd_sections.md
@@ -503,11 +503,11 @@ sections of the DSC file.
<VpdMaxSize> ::= {<IntNum>} {<UINT16>} [<FS> <StringValue>]
<HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
<HiiString> ::= {<CArray>} {<UnicodeString>}
<Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
<VariableGuid> ::= <CName>
-<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
+<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
<VariableOffset> ::= <Number>
<DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
{<BoolType>} {<Expression>}
elif (pcddatumtype == "UINT8"):
{<NumValUint8>} {<Expression>} @@ -721,11 +721,11 @@ sections of the DSC file.
<VpdMaxSize> ::= {<LongNum>} {<UINT32>} [<FS> <StringValue>]
<HiiEntry> ::= <PcdName> <FS> <HiiString> <Field2> <EOL>
<HiiString> ::= {<CArray>} {<UnicodeString>}
<Field2> ::= <FS> <VariableGuid> <FS> <VariableOffset> [<ValueField>]
<VariableGuid> ::= <CName>
-<ValueField> ::= <FS> <DefaultValue> [<FS> <HiiAttrs>]
+<ValueField> ::= <FS> [<DefaultValue>] [<FS> <HiiAttrs>]
<VariableOffset> ::= <Number>
<DefaultValue> ::= if (pcddatumtype == "BOOLEAN"):
{<BoolType>} {<Expression>}
elif (pcddatumtype == "UINT8"):
{<NumValUint8>} {<Expression>}
--
2.20.1.windows.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-01 3:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-28 2:11 [Patch] Document: Update Dsc spec to all empty value for HIIPcd Feng, Bob C
2019-02-28 15:45 ` Carsey, Jaben
2019-03-01 2:58 ` Feng, Bob C
2019-03-01 3:00 ` Feng, Bob C
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox