public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Wu, Hao A" <hao.a.wu@intel.com>
To: devel@edk2.groups.io
Cc: Hao A Wu <hao.a.wu@intel.com>, Ray Ni <ray.ni@intel.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Jordan Justen <jordan.l.justen@intel.com>,
	Laszlo Ersek <lersek@redhat.com>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH v1 4/9] OvmfPkg/OvmfPkg.dec: Add PCD definitions used by copied CSM modules
Date: Wed, 15 May 2019 16:27:15 +0800	[thread overview]
Message-ID: <20190515082720.12560-5-hao.a.wu@intel.com> (raw)
In-Reply-To: <20190515082720.12560-1-hao.a.wu@intel.com>

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811

This commit will add the PCD definitions consumed by the duplicated
drivers:

* VideoDxe
* LegacyBiosDxe

into the OvmfPkg DEC file.

Please note that, instead of adding these PCDs under section:
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]

as in IntelFrameworkModulePkg.dec file, they are added in section:
[PcdsFixedAtBuild]

in OvmfPkg.dec instead.

Cc: Ray Ni <ray.ni@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
---
 OvmfPkg/OvmfPkg.dec | 58 ++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index 2251f4ca99..9640360f62 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -160,6 +160,64 @@
   #  For the corresponding bits, 0 = Edge triggered and 1 = Level triggered.
   gUefiOvmfPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel|0x0000|UINT16|0x5
 
+  ## Indicates if BiosVideo driver will switch to 80x25 Text VGA Mode when
+  #  exiting boot service.
+  #   TRUE  - Switch to Text VGA Mode.
+  #   FALSE - Does not switch to Text VGA Mode.
+  gUefiOvmfPkgTokenSpaceGuid.PcdBiosVideoSetTextVgaModeEnable|FALSE|BOOLEAN|0x28
+
+  ## Indicates if BiosVideo driver will check for VESA BIOS Extension service
+  #  support.
+  #   TRUE  - Check for VESA BIOS Extension service.
+  #   FALSE - Does not check for VESA BIOS Extension service.
+  gUefiOvmfPkgTokenSpaceGuid.PcdBiosVideoCheckVbeEnable|TRUE|BOOLEAN|0x29
+
+  ## Indicates if BiosVideo driver will check for VGA service support.
+  #  NOTE: If both PcdBiosVideoCheckVbeEnable and PcdBiosVideoCheckVgaEnable
+  #  are set to FALSE, that means Graphics Output protocol will not be
+  #  installed, the VGA miniport protocol will be installed instead.
+  #   TRUE  - Check for VGA service.<BR>
+  #   FALSE - Does not check for VGA service.<BR>
+  gUefiOvmfPkgTokenSpaceGuid.PcdBiosVideoCheckVgaEnable|TRUE|BOOLEAN|0x2a
+
+  ## Indicates if memory space for legacy region will be set as cacheable.
+  #   TRUE  - Set cachebility for legacy region.
+  #   FALSE - Does not set cachebility for legacy region.
+  gUefiOvmfPkgTokenSpaceGuid.PcdLegacyBiosCacheLegacyRegion|TRUE|BOOLEAN|0x2b
+
+  ## Specify memory size with bytes to reserve EBDA below 640K for OPROM.
+  #  The value should be a multiple of 4KB.
+  gUefiOvmfPkgTokenSpaceGuid.PcdEbdaReservedMemorySize|0x8000|UINT32|0x2c
+
+  ## Specify memory base address for OPROM to find free memory.
+  #  Some OPROMs do not use EBDA or PMM to allocate memory for its usage,
+  #  instead they find the memory filled with zero from 0x20000.
+  #  The value should be a multiple of 4KB.
+  #  The range should be below the EBDA reserved range from
+  #  (CONVENTIONAL_MEMORY_TOP - Reserved EBDA Memory Size) to
+  #  CONVENTIONAL_MEMORY_TOP.
+  gUefiOvmfPkgTokenSpaceGuid.PcdOpromReservedMemoryBase|0x60000|UINT32|0x2d
+
+  ## Specify memory size with bytes for OPROM to find free memory.
+  #  The value should be a multiple of 4KB. And the range should be below the
+  #  EBDA reserved range from
+  #  (CONVENTIONAL_MEMORY_TOP - Reserved EBDA Memory Size) to
+  #  CONVENTIONAL_MEMORY_TOP.
+  gUefiOvmfPkgTokenSpaceGuid.PcdOpromReservedMemorySize|0x28000|UINT32|0x2e
+
+  ## Specify the end of address below 1MB for the OPROM.
+  #  The last shadowed OpROM should not exceed this address.
+  gUefiOvmfPkgTokenSpaceGuid.PcdEndOpromShadowAddress|0xdffff|UINT32|0x2f
+
+  ## Specify the low PMM (Post Memory Manager) size with bytes below 1MB.
+  #  The value should be a multiple of 4KB.
+  # @Prompt Low PMM (Post Memory Manager) Size
+  gUefiOvmfPkgTokenSpaceGuid.PcdLowPmmMemorySize|0x10000|UINT32|0x30
+
+  ## Specify the high PMM (Post Memory Manager) size with bytes above 1MB.
+  #  The value should be a multiple of 4KB.
+  gUefiOvmfPkgTokenSpaceGuid.PcdHighPmmMemorySize|0x400000|UINT32|0x31
+
 [PcdsDynamic, PcdsDynamicEx]
   gUefiOvmfPkgTokenSpaceGuid.PcdEmuVariableEvent|0|UINT64|2
   gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashVariablesEnable|FALSE|BOOLEAN|0x10
-- 
2.12.0.windows.1


  parent reply	other threads:[~2019-05-15  8:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15  8:27 [PATCH v1 0/9] Duplicate required CSM components for OVMF Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 1/9] OvmfPkg: Copy the required CSM components from framework packages Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 2/9] OvmfPkg/OvmfPkg.dec: Add definitions for CSM-related Guid & Protocol Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 3/9] OvmfPkg/OvmfPkg.dec: Add the new include folder for CSM header files Wu, Hao A
2019-05-15  8:27 ` Wu, Hao A [this message]
2019-05-15  8:27 ` [PATCH v1 5/9] OvmfPkg/Csm/VideoDxe: Update to make it build for OVMF Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 6/9] OvmfPkg/Csm/LegacyBiosDxe: " Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 7/9] OvmfPkg/Csm/LegacyBootMaintUiLib: " Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 8/9] OvmfPkg/Csm/LegacyBootManagerLib: " Wu, Hao A
2019-05-15  8:27 ` [PATCH v1 9/9] OvmfPkg: Update DSC/FDF files to consume CSM components in OvmfPkg Wu, Hao A
2019-05-15  8:46 ` [PATCH v1 0/9] Duplicate required CSM components for OVMF Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190515082720.12560-5-hao.a.wu@intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox