From: "Leif Lindholm" <leif.lindholm@linaro.org>
To: devel@edk2.groups.io, ard.biesheuvel@linaro.org
Cc: masahisa.kojima@linaro.org
Subject: Re: [edk2-devel] [PATCH edk2-platforms 3/5] Platform/Secure96Dxe: redefine LS connector CS as platform property
Date: Wed, 29 May 2019 14:06:52 +0100 [thread overview]
Message-ID: <20190529130652.pkfzeo5xbcotypaf@bivouac.eciton.net> (raw)
In-Reply-To: <20190529125021.28308-4-ard.biesheuvel@linaro.org>
On Wed, May 29, 2019 at 02:50:19PM +0200, Ard Biesheuvel wrote:
> As opposed to the Secure96's I2C peripherals, whose bus addresses are
> properties of the peripherals themselves, the SPI CS address of the
> TPM is a property of the platform that incorporates the LS connector.
>
> So tweak the macros that emit the CS values and related properties
> to put it under the control of the platform that incorporates the
> driver.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> Platform/96Boards/Secure96Dxe/Secure96.dts | 2 +-
> Platform/96Boards/Secure96Dxe/Secure96.h | 11 ++++++++---
> 2 files changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/Platform/96Boards/Secure96Dxe/Secure96.dts b/Platform/96Boards/Secure96Dxe/Secure96.dts
> index d066fcb1933c..0d7d9b3900a4 100644
> --- a/Platform/96Boards/Secure96Dxe/Secure96.dts
> +++ b/Platform/96Boards/Secure96Dxe/Secure96.dts
> @@ -39,7 +39,7 @@
> __overlay__ {
> INFINEON_SLB9670_DT_NODENAME {
> compatible = "infineon,slb9670";
> - reg = <INFINEON_SLB9670_SPI_CS>;
> + reg = <SECURE96_SPI0_CS>;
> spi-max-frequency = <22500000>;
> };
> };
> diff --git a/Platform/96Boards/Secure96Dxe/Secure96.h b/Platform/96Boards/Secure96Dxe/Secure96.h
> index c34fc5eea046..1d8bf4159209 100644
> --- a/Platform/96Boards/Secure96Dxe/Secure96.h
> +++ b/Platform/96Boards/Secure96Dxe/Secure96.h
> @@ -1,6 +1,6 @@
> /** @file
>
> - Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR>
> + Copyright (c) 2018-2019, Linaro, Ltd. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
> **/
> @@ -8,14 +8,19 @@
> #ifndef _SECURE96_H_
> #define _SECURE96_H_
>
> +#define __CONCAT(a,b) a ## b
> +
Urgh. We badly need to properly add some official macros for this.
You could possibly use __CONCATENATE from Base.h.
For new macros, we really should avoid leading _.
/
Leif
> #define ATSHA204A_SLAVE_ADDRESS 0x60
> #define ATSHA204A_DT_NODENAME atsha204a@60
>
> #define ATECC508A_SLAVE_ADDRESS 0x51
> #define ATECC508A_DT_NODENAME atecc508a@51
>
> -#define INFINEON_SLB9670_SPI_CS 0x0
> -#define INFINEON_SLB9670_DT_NODENAME tpm@0
> +#define INFINEON_SLB9670_DT_NODENAME __CONCAT(tpm@,SECURE96_SPI0_CS)
> +
> +#ifndef SECURE96_SPI0_CS
> +#define SECURE96_SPI0_CS 0
> +#endif
>
> #ifndef SECURE96_ACPI_GPIO
> #define SECURE96_ACPI_GPIO "\\_SB.GPIO"
> --
> 2.20.1
>
>
>
>
next prev parent reply other threads:[~2019-05-29 13:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 12:50 [PATCH edk2-platforms 0/5] SynQuacer SPI/TPM support Ard Biesheuvel
2019-05-29 12:50 ` [PATCH edk2-platforms 1/5] Silicon/SynQuacer: add missing SPI controller interrupt lines to DT Ard Biesheuvel
2019-05-29 12:50 ` [PATCH edk2-platforms 2/5] Silicon/SynQuacer: add ACPI description of second SPI controller Ard Biesheuvel
2019-05-29 12:50 ` [PATCH edk2-platforms 3/5] Platform/Secure96Dxe: redefine LS connector CS as platform property Ard Biesheuvel
2019-05-29 13:06 ` Leif Lindholm [this message]
2019-05-29 13:14 ` [edk2-devel] " Ard Biesheuvel
2019-05-29 14:43 ` Leif Lindholm
2019-05-29 18:03 ` Ard Biesheuvel
2019-05-29 12:50 ` [PATCH edk2-platforms 4/5] Platform/Secure96Dxe: add TPM description to SSDT Ard Biesheuvel
2019-05-29 12:50 ` [PATCH edk2-platforms 5/5] DO NOT MERGE - temporary hack to reset the TPM at probe time Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190529130652.pkfzeo5xbcotypaf@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox