From: "Albecki, Mateusz" <mateusz.albecki@intel.com>
To: devel@edk2.groups.io
Cc: Mateusz Albecki <mateusz.albecki@intel.com>,
Hao A Wu <hao.a.wu@intel.com>
Subject: [PATCH] MdeModulePkg/UfsPassThruDxe: Refactor UFS device presence detection
Date: Fri, 21 Jun 2019 17:27:02 +0200 [thread overview]
Message-ID: <20190621152702.3092-1-mateusz.albecki@intel.com> (raw)
In current implementation we are checking for device presence every
time we execute UIC command. To make UfsExecUicCommands more generic
checking device presence has been moved to UfsDeviceDetection.
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
---
.../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 50 ++++++++--------------
1 file changed, 18 insertions(+), 32 deletions(-)
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
index 4b93821f38..633f975e30 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
@@ -1534,7 +1534,7 @@ Exit1:
/**
- Sent UIC DME_LINKSTARTUP command to start the link startup procedure.
+ Send UIC command.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] UicOpcode The opcode of the UIC command.
@@ -1544,7 +1544,6 @@ Exit1:
@return EFI_SUCCESS Successfully execute this UIC command and detect attached UFS device.
@return EFI_DEVICE_ERROR Fail to execute this UIC command and detect attached UFS device.
- @return EFI_NOT_FOUND The presence of the UFS device isn't detected.
**/
EFI_STATUS
@@ -1629,24 +1628,6 @@ UfsExecUicCommands (
}
}
- //
- // Check value of HCS.DP and make sure that there is a device attached to the Link.
- //
- Status = UfsMmioRead32 (Private, UFS_HC_STATUS_OFFSET, &Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((Data & UFS_HC_HCS_DP) == 0) {
- Status = UfsWaitMemSet (Private, UFS_HC_IS_OFFSET, UFS_HC_IS_ULSS, UFS_HC_IS_ULSS, UFS_TIMEOUT);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
- return EFI_NOT_FOUND;
- }
-
- DEBUG ((DEBUG_INFO, "UfsPassThruDxe: found a attached UFS device\n"));
-
return EFI_SUCCESS;
}
@@ -1820,8 +1801,9 @@ UfsDeviceDetection (
IN UFS_PASS_THRU_PRIVATE_DATA *Private
)
{
- UINTN Retry;
- EFI_STATUS Status;
+ UINTN Retry;
+ EFI_STATUS Status;
+ UINT32 Data;
//
// Start UFS device detection.
@@ -1829,22 +1811,26 @@ UfsDeviceDetection (
//
for (Retry = 0; Retry < 3; Retry++) {
Status = UfsExecUicCommands (Private, UfsUicDmeLinkStartup, 0, 0, 0);
- if (!EFI_ERROR (Status)) {
- break;
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
}
- if (Status == EFI_NOT_FOUND) {
- continue;
+ Status = UfsMmioRead32 (Private, UFS_HC_STATUS_OFFSET, &Data);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
}
- return EFI_DEVICE_ERROR;
- }
-
- if (Retry == 3) {
- return EFI_NOT_FOUND;
+ if ((Data & UFS_HC_HCS_DP) == 0) {
+ Status = UfsWaitMemSet (Private, UFS_HC_IS_OFFSET, UFS_HC_IS_ULSS, UFS_HC_IS_ULSS, UFS_TIMEOUT);
+ if (EFI_ERROR (Status)) {
+ return EFI_DEVICE_ERROR;
+ }
+ } else {
+ return EFI_SUCCESS;
+ }
}
- return EFI_SUCCESS;
+ return EFI_NOT_FOUND;
}
/**
--
2.14.1.windows.1
--------------------------------------------------------------------
Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.
Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek
przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by
others is strictly prohibited.
reply other threads:[~2019-06-21 15:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190621152702.3092-1-mateusz.albecki@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox