From: "Albecki, Mateusz" <mateusz.albecki@intel.com>
To: devel@edk2.groups.io
Cc: Mateusz Albecki <mateusz.albecki@intel.com>,
Hao A Wu <hao.a.wu@intel.com>
Subject: [PATCH v2] MdeModulePkg/UfsPassThruDxe: Fix unaligned data transfer handling
Date: Tue, 25 Jun 2019 11:44:28 +0200 [thread overview]
Message-ID: <20190625094428.600-1-mateusz.albecki@intel.com> (raw)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1341
Since UFS specification requirs the data buffer specified
in PRDT to be DWORD aligned in size we had a code in
UfsInitUtpPrdt that aligned the data buffer by rounding down
the buffer size to DWORD boundary. This meant that for SCSI
commands that wanted to perform unaligned data transfer(such as
SENSE command) we specified to small buffer for the data to fit
and transfer was aborted. This change introduces code that allocates
auxiliary DWORD aligned data buffer for unaligned transfer. Device
transfers data to aligned buffer and when data transfer is over driver
copies data from aligned buffer to data buffer passed by user.
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
---
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h | 2 +
.../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 198 +++++++++++++++------
2 files changed, 146 insertions(+), 54 deletions(-)
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
index 6c98b3a76a..9b68db5ffe 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
@@ -92,6 +92,8 @@ typedef struct {
UINT32 CmdDescSize;
VOID *CmdDescHost;
VOID *CmdDescMapping;
+ VOID *AlignedDataBuf;
+ UINTN AlignedDataBufSize;
VOID *DataBufMapping;
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet;
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
index 4b93821f38..4f41183504 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
@@ -394,17 +394,13 @@ UfsInitUtpPrdt (
UINT8 *Remaining;
UINTN PrdtNumber;
- if ((BufferSize & (BIT0 | BIT1)) != 0) {
- BufferSize &= ~(BIT0 | BIT1);
- DEBUG ((DEBUG_WARN, "UfsInitUtpPrdt: The BufferSize [%d] is not dword-aligned!\n", BufferSize));
- }
+ ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0);
+ ASSERT ((BufferSize & (BIT1 | BIT0)) == 0);
if (BufferSize == 0) {
return EFI_SUCCESS;
}
- ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0);
-
RemainingLen = BufferSize;
Remaining = Buffer;
PrdtNumber = (UINTN)DivU64x32 ((UINT64)BufferSize + UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);
@@ -1317,6 +1313,139 @@ Exit:
return Status;
}
+/**
+ Cleanup data buffers after data transfer. This function
+ also takes care to copy all data to user memory pool for
+ unaligned data transfers.
+
+ @param[in] Private Pointer to the UFS_PASS_THRU_PRIVATE_DATA
+ @param[in] TransReq Pointer to the transfer request
+**/
+VOID
+UfsReconcileDataTransferBuffer (
+ IN UFS_PASS_THRU_PRIVATE_DATA *Private,
+ IN UFS_PASS_THRU_TRANS_REQ *TransReq
+ )
+{
+ if (TransReq->DataBufMapping != NULL) {
+ Private->UfsHostController->Unmap (
+ Private->UfsHostController,
+ TransReq->DataBufMapping
+ );
+ }
+
+ //
+ // Check if unaligned transfer was performed. If it was and we read
+ // data from device copy memory to user data buffers before cleanup.
+ // The assumption is if auxiliary aligned data buffer is not NULL then
+ // unaligned transfer has been performed.
+ //
+ if (TransReq->AlignedDataBuf != NULL) {
+ if (TransReq->Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
+ CopyMem (TransReq->Packet->InDataBuffer, TransReq->AlignedDataBuf, TransReq->Packet->InTransferLength);
+ }
+ //
+ // Wipe out the transfer buffer in case it contains sensitive data.
+ //
+ ZeroMem (TransReq->AlignedDataBuf, TransReq->AlignedDataBufSize);
+ FreeAlignedPages (TransReq->AlignedDataBuf, EFI_SIZE_TO_PAGES (TransReq->AlignedDataBufSize));
+ TransReq->AlignedDataBuf = NULL;
+ }
+}
+
+/**
+ Prepare data buffer for transfer
+
+ @param[in] Private Pointer to the UFS_PASS_THRU_PRIVATE_DATA
+ @param[in, out] TransReq Pointer to the transfer request
+
+ @retval EFI_DEVICE_ERROR Failed to prepare buffer for transfer
+ @retval EFI_SUCCESS Buffer ready for transfer
+**/
+EFI_STATUS
+UfsPrepareDataTransferBuffer (
+ IN UFS_PASS_THRU_PRIVATE_DATA *Private,
+ IN OUT UFS_PASS_THRU_TRANS_REQ *TransReq
+ )
+{
+ EFI_STATUS Status;
+ VOID *DataBuf;
+ UINT32 DataLen;
+ UINTN MapLength;
+ EFI_PHYSICAL_ADDRESS DataBufPhyAddr;
+ EDKII_UFS_HOST_CONTROLLER_OPERATION Flag;
+ UTP_TR_PRD *PrdtBase;
+
+ DataBufPhyAddr = (EFI_PHYSICAL_ADDRESS) NULL;
+ DataBuf = NULL;
+
+ //
+ // For unaligned data transfers we allocate auxiliary DWORD aligned memory pool.
+ // When command is finished auxiliary memory pool is copied into actual user memory.
+ // This is requiered to assure data transfer safety(DWORD alignment required by UFS spec.)
+ //
+ if (TransReq->Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
+ if (((UINTN)TransReq->Packet->InDataBuffer % 4 != 0) || (TransReq->Packet->InTransferLength % 4 != 0)) {
+ DataLen = TransReq->Packet->InTransferLength + (4 - (TransReq->Packet->InTransferLength % 4));
+ DataBuf = AllocateAlignedPages (EFI_SIZE_TO_PAGES (DataLen), 4);
+ if (DataBuf == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+ ZeroMem (DataBuf, DataLen);
+ TransReq->AlignedDataBuf = DataBuf;
+ TransReq->AlignedDataBufSize = DataLen;
+ } else {
+ DataLen = TransReq->Packet->InTransferLength;
+ DataBuf = TransReq->Packet->InDataBuffer;
+ }
+ Flag = EdkiiUfsHcOperationBusMasterWrite;
+ } else {
+ if (((UINTN)TransReq->Packet->OutDataBuffer % 4 != 0) || (TransReq->Packet->OutTransferLength % 4 != 0)) {
+ DataLen = TransReq->Packet->OutTransferLength + (4 - (TransReq->Packet->OutTransferLength % 4));
+ DataBuf = AllocateAlignedPages (EFI_SIZE_TO_PAGES (DataLen), 4);
+ if (DataBuf == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+ CopyMem (DataBuf, TransReq->Packet->OutDataBuffer, TransReq->Packet->OutTransferLength);
+ TransReq->AlignedDataBuf = DataBuf;
+ TransReq->AlignedDataBufSize = DataLen;
+ } else {
+ DataLen = TransReq->Packet->OutTransferLength;
+ DataBuf = TransReq->Packet->OutDataBuffer;
+ }
+ Flag = EdkiiUfsHcOperationBusMasterRead;
+ }
+
+ if (DataLen != 0) {
+ MapLength = DataLen;
+ Status = Private->UfsHostController->Map (
+ Private->UfsHostController,
+ Flag,
+ DataBuf,
+ &MapLength,
+ &DataBufPhyAddr,
+ &TransReq->DataBufMapping
+ );
+
+ if (EFI_ERROR (Status) || (DataLen != MapLength)) {
+ if (TransReq->AlignedDataBuf != NULL) {
+ FreeAlignedPages (TransReq->AlignedDataBuf, EFI_SIZE_TO_PAGES (TransReq->AlignedDataBufSize));
+ TransReq->AlignedDataBuf = NULL;
+ }
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ //
+ // Fill PRDT table of Command UPIU for executed SCSI cmd.
+ //
+ PrdtBase = (UTP_TR_PRD*)((UINT8*)TransReq->CmdDescHost + ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)));
+ ASSERT (PrdtBase != NULL);
+ UfsInitUtpPrdt (PrdtBase, (VOID*)(UINTN)DataBufPhyAddr, DataLen);
+
+ return EFI_SUCCESS;
+}
+
/**
Sends a UFS-supported SCSI Request Packet to a UFS device that is attached to the UFS host controller.
@@ -1353,24 +1482,19 @@ UfsExecScsiCmds (
UTP_RESPONSE_UPIU *Response;
UINT16 SenseDataLen;
UINT32 ResTranCount;
- VOID *DataBuf;
- EFI_PHYSICAL_ADDRESS DataBufPhyAddr;
- UINT32 DataLen;
- UINTN MapLength;
- EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
- EDKII_UFS_HOST_CONTROLLER_OPERATION Flag;
- UTP_TR_PRD *PrdtBase;
EFI_TPL OldTpl;
UFS_PASS_THRU_TRANS_REQ *TransReq;
+ EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHc;
- TransReq = AllocateZeroPool (sizeof (UFS_PASS_THRU_TRANS_REQ));
+ TransReq = AllocateZeroPool (sizeof (UFS_PASS_THRU_TRANS_REQ));
if (TransReq == NULL) {
return EFI_OUT_OF_RESOURCES;
}
TransReq->Signature = UFS_PASS_THRU_TRANS_REQ_SIG;
TransReq->TimeoutRemain = Packet->Timeout;
- DataBufPhyAddr = 0;
+ TransReq->Packet = Packet;
+
UfsHc = Private->UfsHostController;
//
// Find out which slot of transfer request list is available.
@@ -1399,44 +1523,16 @@ UfsExecScsiCmds (
TransReq->CmdDescSize = TransReq->Trd->PrdtO * sizeof (UINT32) + TransReq->Trd->PrdtL * sizeof (UTP_TR_PRD);
- if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
- DataBuf = Packet->InDataBuffer;
- DataLen = Packet->InTransferLength;
- Flag = EdkiiUfsHcOperationBusMasterWrite;
- } else {
- DataBuf = Packet->OutDataBuffer;
- DataLen = Packet->OutTransferLength;
- Flag = EdkiiUfsHcOperationBusMasterRead;
- }
-
- if (DataLen != 0) {
- MapLength = DataLen;
- Status = UfsHc->Map (
- UfsHc,
- Flag,
- DataBuf,
- &MapLength,
- &DataBufPhyAddr,
- &TransReq->DataBufMapping
- );
-
- if (EFI_ERROR (Status) || (DataLen != MapLength)) {
- goto Exit1;
- }
+ Status = UfsPrepareDataTransferBuffer (Private, TransReq);
+ if (EFI_ERROR (Status)) {
+ goto Exit1;
}
- //
- // Fill PRDT table of Command UPIU for executed SCSI cmd.
- //
- PrdtBase = (UTP_TR_PRD*)((UINT8*)TransReq->CmdDescHost + ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)));
- ASSERT (PrdtBase != NULL);
- UfsInitUtpPrdt (PrdtBase, (VOID*)(UINTN)DataBufPhyAddr, DataLen);
//
// Insert the async SCSI cmd to the Async I/O list
//
if (Event != NULL) {
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- TransReq->Packet = Packet;
TransReq->CallerEvent = Event;
InsertTailList (&Private->Queue, &TransReq->TransferList);
gBS->RestoreTPL (OldTpl);
@@ -1515,9 +1611,7 @@ Exit:
UfsStopExecCmd (Private, TransReq->Slot);
- if (TransReq->DataBufMapping != NULL) {
- UfsHc->Unmap (UfsHc, TransReq->DataBufMapping);
- }
+ UfsReconcileDataTransferBuffer (Private, TransReq);
Exit1:
if (TransReq->CmdDescMapping != NULL) {
@@ -1532,7 +1626,6 @@ Exit1:
return Status;
}
-
/**
Sent UIC DME_LINKSTARTUP command to start the link startup procedure.
@@ -2100,7 +2193,6 @@ UfsControllerStop (
return EFI_SUCCESS;
}
-
/**
Internal helper function which will signal the caller event and clean up
resources.
@@ -2132,9 +2224,7 @@ SignalCallerEvent (
UfsStopExecCmd (Private, TransReq->Slot);
- if (TransReq->DataBufMapping != NULL) {
- UfsHc->Unmap (UfsHc, TransReq->DataBufMapping);
- }
+ UfsReconcileDataTransferBuffer (Private, TransReq);
if (TransReq->CmdDescMapping != NULL) {
UfsHc->Unmap (UfsHc, TransReq->CmdDescMapping);
--
2.14.1.windows.1
--------------------------------------------------------------------
Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.
Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek
przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by
others is strictly prohibited.
next reply other threads:[~2019-06-25 9:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-25 9:44 Albecki, Mateusz [this message]
2019-06-26 0:19 ` [PATCH v2] MdeModulePkg/UfsPassThruDxe: Fix unaligned data transfer handling Wu, Hao A
2019-06-26 9:54 ` Albecki, Mateusz
2019-06-27 1:08 ` Wu, Hao A
2019-07-01 1:09 ` [edk2-devel] " Wu, Hao A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190625094428.600-1-mateusz.albecki@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox