From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org
Subject: [edk2-platforms: PATCH 2/2] Platform/Rpi3: Add custom CPU frequency support
Date: Tue, 2 Jul 2019 17:13:41 +0100 [thread overview]
Message-ID: <20190702161341.2652-3-pete@akeo.ie> (raw)
In-Reply-To: <20190702161341.2652-1-pete@akeo.ie>
Allow users to set a custom CPU frequency [100 - 1600 MHz]
in 'Device Manager' -> 'Raspberry Pi Configuration'.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c | 13 +++++++++++-
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf | 1 +
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni | 4 ++++
Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr | 22 ++++++++++++++++++++
Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 4 +++-
Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h | 3 ++-
Platform/RaspberryPi/RPi3/RPi3.dec | 17 ++++++++-------
Platform/RaspberryPi/RPi3/RPi3.dsc | 1 +
8 files changed, 54 insertions(+), 11 deletions(-)
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
index d64e70adce36..fcb4ce6935b6 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.c
@@ -108,6 +108,14 @@ SetupVariables (
PcdSet32 (PcdCpuClock, PcdGet32 (PcdCpuClock));
}
+ Size = sizeof (UINT32);
+ Status = gRT->GetVariable(L"CustomCpuClock",
+ &gConfigDxeFormSetGuid,
+ NULL, &Size, &Var32);
+ if (EFI_ERROR (Status)) {
+ PcdSet32 (PcdCustomCpuClock, PcdGet32 (PcdCustomCpuClock));
+ }
+
Size = sizeof (UINT32);
Status = gRT->GetVariable (L"SdIsArasan",
&gConfigDxeFormSetGuid,
@@ -201,6 +209,7 @@ ApplyVariables (
UINTN Gpio48Group;
EFI_STATUS Status;
UINT32 CpuClock = PcdGet32 (PcdCpuClock);
+ UINT32 CustomCpuClock = PcdGet32 (PcdCustomCpuClock);
UINT32 Rate = 0;
if (CpuClock != 0) {
@@ -213,6 +222,8 @@ ApplyVariables (
if (Status != EFI_SUCCESS) {
DEBUG ((DEBUG_ERROR, "Couldn't get the max CPU speed, leaving as is: %r\n", Status));
}
+ } else if (CpuClock == 3) {
+ Rate = CustomCpuClock * 1000000;
} else {
Rate = 600 * 1000000;
}
@@ -220,7 +231,7 @@ ApplyVariables (
if (Rate != 0) {
DEBUG ((DEBUG_INFO, "Setting CPU speed to %uHz\n", Rate));
- Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate);
+ Status = mFwProtocol->SetClockRate (RPI_MBOX_CLOCK_RATE_ARM, Rate, 1);
if (Status != EFI_SUCCESS) {
DEBUG ((DEBUG_ERROR, "Couldn't set the CPU speed: %r\n", Status));
}
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
index 3fee190ac41b..6d6c90b78408 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxe.inf
@@ -54,6 +54,7 @@ [Protocols]
[Pcd]
gRaspberryPiTokenSpaceGuid.PcdCpuClock
+ gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock
gRaspberryPiTokenSpaceGuid.PcdSdIsArasan
gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit
gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
index a9c101433008..04f735949ba5 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.uni
@@ -25,6 +25,10 @@
#string STR_CHIPSET_CLOCK_CPU_NA #language en-US "Don't Override"
#string STR_CHIPSET_CLOCK_CPU_600MHZ #language en-US "Min (600MHz)"
#string STR_CHIPSET_CLOCK_CPU_MAX #language en-US "Max"
+#string STR_CHIPSET_CLOCK_CPU_CUSTOM #language en-US "Custom"
+
+#string STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT #language en-US "CPU Clock Rate (MHz)"
+#string STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP #language en-US "Adjust the CPU speed.\nMin value: 100 MHz\nMax value: 1600 MHz\n\nWarning: Overclocking can make the system unbootable!"
#string STR_CHIPSET_SD_PROMPT #language en-US "uSD Routing"
#string STR_CHIPSET_SD_HELP #language en-US "Choose host controller to drive uSD slot"
diff --git a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
index 7a1824525892..217a285b5a1f 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
+++ b/Platform/RaspberryPi/RPi3/Drivers/ConfigDxe/ConfigDxeHii.vfr
@@ -47,10 +47,15 @@ typedef struct {
* 0 - don't change the clock rate.
* 1 - 600MHz.
* 2 - maximum.
+ * 3 - custom.
*/
UINT32 Clock;
} CHIPSET_CPU_CLOCK_VARSTORE_DATA;
+typedef struct {
+ UINT32 Clock;
+} CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA;
+
typedef struct {
/*
* 0 - uSD slot routed to Broadcom SDHOST.
@@ -116,6 +121,11 @@ formset
name = CpuClock,
guid = CONFIGDXE_FORM_SET_GUID;
+ efivarstore CHIPSET_CUSTOM_CPU_CLOCK_VARSTORE_DATA,
+ attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
+ name = CustomCpuClock,
+ guid = CONFIGDXE_FORM_SET_GUID;
+
efivarstore CHIPSET_SD_VARSTORE_DATA,
attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
name = SdIsArasan,
@@ -198,8 +208,20 @@ formset
option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_NA), value = 0, flags = DEFAULT;
option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_600MHZ), value = 1, flags = 0;
option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_MAX), value = 2, flags = 0;
+ option text = STRING_TOKEN(STR_CHIPSET_CLOCK_CPU_CUSTOM), value = 3, flags = 0;
endoneof;
+ grayoutif NOT ideqval CpuClock.Clock == 3;
+ numeric varid = CustomCpuClock.Clock,
+ prompt = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT),
+ help = STRING_TOKEN(STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP),
+ flags = DISPLAY_UINT_DEC | NUMERIC_SIZE_4 | INTERACTIVE | RESET_REQUIRED,
+ minimum = 100,
+ maximum = 1600,
+ default = 600,
+ endnumeric;
+ endif;
+
oneof varid = SdIsArasan.Routing,
prompt = STRING_TOKEN(STR_CHIPSET_SD_PROMPT),
help = STRING_TOKEN(STR_CHIPSET_SD_HELP),
diff --git a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
index 925f5a921290..5d96c0d84181 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
+++ b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -800,7 +800,8 @@ EFI_STATUS
EFIAPI
RpiFirmwareSetClockRate (
IN UINT32 ClockId,
- IN UINT32 ClockRate
+ IN UINT32 ClockRate,
+ IN UINT32 SkipTurbo
)
{
RPI_FW_SET_CLOCK_RATE_CMD *Cmd;
@@ -822,6 +823,7 @@ RpiFirmwareSetClockRate (
Cmd->TagHead.TagValueSize = 0;
Cmd->TagBody.ClockId = ClockId;
Cmd->TagBody.ClockRate = ClockRate;
+ Cmd->TagBody.SkipTurbo = SkipTurbo;
Cmd->EndTag = 0;
Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
diff --git a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
index f3e3d1e99eba..cc4e2786e653 100644
--- a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
+++ b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
@@ -44,7 +44,8 @@ typedef
EFI_STATUS
(EFIAPI *SET_CLOCK_RATE) (
IN UINT32 ClockId,
- OUT UINT32 ClockRate
+ OUT UINT32 ClockRate,
+ IN UINT32 SkipTurbo
);
typedef
diff --git a/Platform/RaspberryPi/RPi3/RPi3.dec b/Platform/RaspberryPi/RPi3/RPi3.dec
index ab3788237861..56eac262502e 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.dec
+++ b/Platform/RaspberryPi/RPi3/RPi3.dec
@@ -39,13 +39,14 @@ [PcdsFixedAtBuild.common]
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
gRaspberryPiTokenSpaceGuid.PcdCpuClock|0|UINT32|0x0000000d
- gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000e
- gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x0000000f
- gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000010
- gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000011
- gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000012
- gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000013
- gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000014
- gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000015
+ gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|0|UINT32|0x0000000e
+ gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|0|UINT32|0x0000000f
+ gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|0|UINT32|0x00000010
+ gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|0|UINT32|0x00000011
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|0|UINT32|0x00000012
+ gRaspberryPiTokenSpaceGuid.PcdMmcSdHighSpeedMHz|0|UINT32|0x00000013
+ gRaspberryPiTokenSpaceGuid.PcdMmcDisableMulti|0|UINT32|0x00000014
+ gRaspberryPiTokenSpaceGuid.PcdDebugEnableJTAG|0|UINT32|0x00000015
+ gRaspberryPiTokenSpaceGuid.PcdDebugShowUEFIExit|0|UINT32|0x00000016
gRaspberryPiTokenSpaceGuid.PcdDisplayEnableVModes|0|UINT32|0x00000017
gRaspberryPiTokenSpaceGuid.PcdDisplayEnableSShot|0|UINT32|0x00000018
diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
index ad8fb03ab305..2b9e619ad55c 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.dsc
+++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
@@ -393,6 +393,7 @@ [PcdsDynamicHii.common.DEFAULT]
#
gRaspberryPiTokenSpaceGuid.PcdCpuClock|L"CpuClock"|gConfigDxeFormSetGuid|0x0|0
+ gRaspberryPiTokenSpaceGuid.PcdCustomCpuClock|L"CustomCpuClock"|gConfigDxeFormSetGuid|0x0|600
#
# SD-related.
--
2.21.0.windows.1
next prev parent reply other threads:[~2019-07-02 16:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-02 16:13 [edk2-platforms: PATCH 0/2] Platform/RPi3 improve boot order and add custom freqs Pete Batard
2019-07-02 16:13 ` [edk2-platforms: PATCH 1/2] Platform/RPi3: Set the boot option of UEFI Shell as non-active Pete Batard
2019-07-03 11:43 ` Leif Lindholm
2019-07-02 16:13 ` Pete Batard [this message]
2019-07-03 11:42 ` [edk2-platforms: PATCH 2/2] Platform/Rpi3: Add custom CPU frequency support Leif Lindholm
2019-07-03 12:09 ` Pete Batard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190702161341.2652-3-pete@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox