From: "Leif Lindholm" <leif.lindholm@linaro.org>
To: "Ooi, Tzy Way" <tzy.way.ooi@intel.com>
Cc: "devel@edk2.groups.io" <devel@edk2.groups.io>,
Ard BieSheuvel <ard.biesheuvel@linaro.org>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Loh, Tien Hock" <tien.hock.loh@intel.com>
Subject: Re: [edk2-devel] [PATCH v6 edk2-platforms 1/1] Silicon/Synopsys/Designware/Driver: DwEmacSnpDxe: Add DesignWare EMAC driver
Date: Tue, 16 Jul 2019 18:22:27 +0100 [thread overview]
Message-ID: <20190716172227.wuczvla67izm7ccr@bivouac.eciton.net> (raw)
In-Reply-To: <5F1105621EDF844291AF8B109E27C06D34D2E67E@PGSMSX109.gar.corp.intel.com>
Hi Tzy Way,
On Tue, Jul 16, 2019 at 09:37:38AM +0000, Ooi, Tzy Way wrote:
> I am new to the compilation tools. May I know if you can share to me
> how to run the compilation with Debian's gcc 8.3 so that I can see
> the same warning described below? Currently, I am using linaro
> toolchain 7.2.1 and follow the guide in the link below to compile
> the source code.
>
> https://github.com/tianocore/edk2-platforms
>
> I am not able to see any warning in the compilation messages. Wonder
> if I need to enable something, for example some CFLAGS during
> compilation?
Yeah, the tools are getting stricter all the time - but we don't want
to merge code we can't build with the toolchains included in current
long-term supported Linux distributions.
What does your setup look like today - are you on Windows or Linux?
If Linux, can you use WSL?
Cross compilation tools for both ARM and AARCH64 (and the very latest
ones Ia32/X64) are available in several current Linux distributions
(and hence in WSL).
Best Regards,
Leif
>
> Thank you in advance.
>
> Best regards,
> Tzy Way
>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Leif Lindholm
> Sent: Friday, July 12, 2019 12:43 AM
> To: Ooi, Tzy Way <tzy.way.ooi@intel.com>
> Cc: devel@edk2.groups.io; Ard BieSheuvel <ard.biesheuvel@linaro.org>; Kinney, Michael D <michael.d.kinney@intel.com>; Loh, Tien Hock <tien.hock.loh@intel.com>
> Subject: Re: [edk2-devel] [PATCH v6 edk2-platforms 1/1] Silicon/Synopsys/Designware/Driver: DwEmacSnpDxe: Add DesignWare EMAC driver
>
> Hi Tzy Way,
>
> Nearly there, but please make sure BaseTools/Scripts/PatchCheck.py runs without warnings or errors (there are quite a few still in this version).
>
> Building the .dsc using current edk2 fails with 'MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf is not found in packages path'
> The path needs to be updated to NetworkPkg/Library/DxeNetLib/DxeNetLib.inf.
>
> Secondly, could you add NOOPT as a BUILD_TARGET, in addition to DEBUG and RELEASE?
>
> Also, Debian's gcc 8.3 throws a set of compilation errors (both DEBUG and RELEASE) when building for AARCH64:
>
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/EmacDxeUtil.c: In function <E2><80><98>EmacSetupTxdesc<E2><80><99>:
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/EmacDxeUtil.c:236:81: error: iteration 9 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
> TxDescriptor->AddrNext = (UINT32)(UINTN)EmacDriver->TxdescRingMap[Index + 1].AddrMap;
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/EmacDxeUtil.c:233:3: note: within this loop
> for (Index = 0; Index < CONFIG_TX_DESCR_NUM; Index++) {
> ^~~
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/EmacDxeUtil.c: In function <E2><80><98>EmacSetupRxdesc<E2><80><99>:
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/EmacDxeUtil.c:270:81: error: iteration 9 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
> RxDescriptor->AddrNext = (UINT32)(UINTN)EmacDriver->RxdescRingMap[Index + 1].AddrMap;
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/EmacDxeUtil.c:267:3: note: within this loop
> for (Index = 0; Index < CONFIG_RX_DESCR_NUM; Index++) {
> ^~~
> cc1: all warnings being treated as errors
>
>
> It also throws the following errors when building for ARM:
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/DwEmacSnpDxe.c: In function <E2><80><98>SnpTransmit<E2><80><99>:
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/DwEmacSnpDxe.c:962:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
> TxDescriptorMap = (VOID *)Snp->MacDriver.TxdescRingMap[DescNum].AddrMap;
> ^
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/DwEmacSnpDxe.c:1026:51: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
> Snp->RecycledTxBuf[Snp->RecycledTxBufCount] = (UINT64) Data;
> ^
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/DwEmacSnpDxe.c: In function <E2><80><98>SnpReceive<E2><80><99>:
> /work/git/edk2-platforms/Silicon/Synopsys/DesignWare/Drivers/DwEmacSnpDxe/DwEmacSnpDxe.c:1143:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
> RxDescriptorMap = (VOID *)Snp->MacDriver.RxdescRingMap[DescNum].AddrMap;
> ^
> cc1: all warnings being treated as errors
>
>
> Could you please look into and address these issues for the next version?
>
> Best Regards,
>
> Leif
>
> On Mon, Jul 08, 2019 at 03:05:07PM +0800, tzy.way.ooi@intel.com wrote:
> > From: Ooi Tzy Way <tzy.way.ooi@intel.com>
> >
> > Add driver support for the Ethernet MAC based on Synopsys DesignWare
> > 3504-0 Universal 10/100/1000 Ethernet MAC and KSZ9031 PHY
> >
> > Cc: Ard BieSheuvel <ard.biesheuvel@linaro.org>
> > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Loh Tien Hock <tien.hock.loh@intel.com>
> >
> > Contributed-under: Tianocore Contribution Agreement 1.1
> > Signed-off-by: Ooi Tzy Way <tzy.way.ooi@intel.com>
> >
> > ---
> > v6:
> > - Update to recent version for EDK2 specific file formats
> > - Update the directory layout to Silicon/Synopsys/DesignWare
> > - Add a DesignWare.dsc for building this driver
> > - Update the license
> > - Update the .c file to declare its own include file
> > - Remove __ in defining the header file
> > - Fix indentation
> > - Delete commented-out code
>
>
>
next prev parent reply other threads:[~2019-07-16 17:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 7:05 [PATCH v6 edk2-platforms 1/1] Silicon/Synopsys/Designware/Driver: DwEmacSnpDxe: Add DesignWare EMAC driver Ooi, Tzy Way
2019-07-11 16:43 ` Leif Lindholm
2019-07-16 9:37 ` [edk2-devel] " Ooi, Tzy Way
2019-07-16 17:22 ` Leif Lindholm [this message]
2019-07-17 9:25 ` Ooi, Tzy Way
2019-07-17 11:44 ` Leif Lindholm
2019-07-19 6:41 ` Ooi, Tzy Way
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190716172227.wuczvla67izm7ccr@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox