From: "Michael D Kinney" <michael.d.kinney@intel.com>
To: devel@edk2.groups.io
Cc: Zailiang Sun <zailiang.sun@intel.com>,
Yi Qian <yi.qian@intel.com>, Gary Lin <glin@suse.com>
Subject: [edk2-platforms Patch 1/5] Vlv2TbltDevicePkg/PlatformPei: Add boot mode detection
Date: Thu, 18 Jul 2019 16:00:13 -0700 [thread overview]
Message-ID: <20190718230017.14852-2-michael.d.kinney@intel.com> (raw)
In-Reply-To: <20190718230017.14852-1-michael.d.kinney@intel.com>
Add boot mode detection back into PlatformPei that was
inadvertently removed in the following commit:
https://github.com/tianocore/edk2-platforms/commit/d6211390793fbd0a89b14001c43e0ef942c85425
Boot mode detection at this point is required to detect
the boot mode of BOOT_ON_FLASH_UPDATE that is required
to detect, coalesce, and process UEFI Capsules.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Gary Lin <glin@suse.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
.../Vlv2TbltDevicePkg/PlatformPei/BootMode.c | 92 ++++++++++++++++++-
.../Vlv2TbltDevicePkg/PlatformPei/Platform.c | 6 ++
.../Vlv2TbltDevicePkg/PlatformPei/Platform.h | 17 ++++
3 files changed, 114 insertions(+), 1 deletion(-)
diff --git a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c
index 5269b1ed39..4c0e660b7f 100644
--- a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c
+++ b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/BootMode.c
@@ -82,7 +82,7 @@ CapsulePpiNotifyCallback (
if (Status == EFI_SUCCESS) {
if (Capsule->CheckCapsuleUpdate ((EFI_PEI_SERVICES**)PeiServices) == EFI_SUCCESS) {
BootMode = BOOT_ON_FLASH_UPDATE;
- DEBUG ((EFI_D_ERROR, "Setting BootMode to BOOT_ON_FLASH_UPDATE\n"));
+ DEBUG ((DEBUG_ERROR, "Setting BootMode to BOOT_ON_FLASH_UPDATE\n"));
Status = (*PeiServices)->SetBootMode((const EFI_PEI_SERVICES **)PeiServices, BootMode);
ASSERT_EFI_ERROR (Status);
}
@@ -92,6 +92,96 @@ CapsulePpiNotifyCallback (
return Status;
}
+EFI_STATUS
+UpdateBootMode (
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+ EFI_BOOT_MODE BootMode;
+ UINT16 SleepType;
+ CHAR16 *strBootMode;
+
+ Status = (*PeiServices)->GetBootMode(PeiServices, &BootMode);
+ ASSERT_EFI_ERROR (Status);
+ if (BootMode == BOOT_IN_RECOVERY_MODE){
+ return Status;
+ }
+
+ //
+ // Let's assume things are OK if not told otherwise
+ //
+ BootMode = BOOT_WITH_FULL_CONFIGURATION;
+
+ if (GetSleepTypeAfterWakeup (PeiServices, &SleepType)) {
+ switch (SleepType) {
+ case V_PCH_ACPI_PM1_CNT_S3:
+ BootMode = BOOT_ON_S3_RESUME;
+ Status = (*PeiServices)->NotifyPpi (PeiServices, &mCapsuleNotifyList[0]);
+ ASSERT_EFI_ERROR (Status);
+ break;
+
+ case V_PCH_ACPI_PM1_CNT_S4:
+ BootMode = BOOT_ON_S4_RESUME;
+ break;
+
+ case V_PCH_ACPI_PM1_CNT_S5:
+ BootMode = BOOT_ON_S5_RESUME;
+ break;
+ } // switch (SleepType)
+ }
+
+ if (IsFastBootEnabled (PeiServices)) {
+ DEBUG ((DEBUG_INFO, "Prioritizing Boot mode to BOOT_WITH_MINIMAL_CONFIGURATION\n"));
+ PrioritizeBootMode (&BootMode, BOOT_WITH_MINIMAL_CONFIGURATION);
+ }
+
+ switch (BootMode) {
+ case BOOT_WITH_FULL_CONFIGURATION:
+ strBootMode = L"BOOT_WITH_FULL_CONFIGURATION";
+ break;
+ case BOOT_WITH_MINIMAL_CONFIGURATION:
+ strBootMode = L"BOOT_WITH_MINIMAL_CONFIGURATION";
+ break;
+ case BOOT_ASSUMING_NO_CONFIGURATION_CHANGES:
+ strBootMode = L"BOOT_ASSUMING_NO_CONFIGURATION_CHANGES";
+ break;
+ case BOOT_WITH_FULL_CONFIGURATION_PLUS_DIAGNOSTICS:
+ strBootMode = L"BOOT_WITH_FULL_CONFIGURATION_PLUS_DIAGNOSTICS";
+ break;
+ case BOOT_WITH_DEFAULT_SETTINGS:
+ strBootMode = L"BOOT_WITH_DEFAULT_SETTINGS";
+ break;
+ case BOOT_ON_S4_RESUME:
+ strBootMode = L"BOOT_ON_S4_RESUME";
+ break;
+ case BOOT_ON_S5_RESUME:
+ strBootMode = L"BOOT_ON_S5_RESUME";
+ break;
+ case BOOT_ON_S2_RESUME:
+ strBootMode = L"BOOT_ON_S2_RESUME";
+ break;
+ case BOOT_ON_S3_RESUME:
+ strBootMode = L"BOOT_ON_S3_RESUME";
+
+ break;
+ case BOOT_ON_FLASH_UPDATE:
+ strBootMode = L"BOOT_ON_FLASH_UPDATE";
+ break;
+ case BOOT_IN_RECOVERY_MODE:
+ strBootMode = L"BOOT_IN_RECOVERY_MODE";
+ break;
+ default:
+ strBootMode = L"Unknown boot mode";
+ } // switch (BootMode)
+
+ DEBUG ((DEBUG_ERROR, "Setting BootMode to %s\n", strBootMode));
+ Status = (*PeiServices)->SetBootMode(PeiServices, BootMode);
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
/**
Get sleep type after wakeup
diff --git a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.c b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.c
index 90998871dc..1b23bc9740 100644
--- a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.c
+++ b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.c
@@ -813,6 +813,12 @@ PeiInitPlatform (
sizeof (EFI_PLATFORM_INFO_HOB)
);
+ //
+ // Set the new boot mode for MRC
+ //
+ Status = UpdateBootMode (PeiServices);
+ ASSERT_EFI_ERROR (Status);
+
DEBUG((EFI_D_INFO, "Setup MMIO size ... \n\n"));
//
diff --git a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.h b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.h
index 4f71e519e0..e2e07dc446 100644
--- a/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.h
+++ b/Platform/Intel/Vlv2TbltDevicePkg/PlatformPei/Platform.h
@@ -21,6 +21,23 @@ typedef struct {
#define STALL_PEIM_FROM_THIS(a) CR (a, STALL_CALLBACK_STATE_INFORMATION, StallNotify, STALL_PEIM_SIGNATURE)
+/**
+ Peform the boot mode determination logic
+ If the box is closed, then
+ 1. If it's first time to boot, it's boot with full config .
+ 2. If the ChassisIntrution is selected, force to be a boot with full config
+ 3. Otherwise it's boot with no change.
+
+ @param PeiServices General purpose services available to every PEIM.
+ @param BootMode The detected boot mode.
+
+ @retval EFI_SUCCESS if the boot mode could be set
+**/
+EFI_STATUS
+UpdateBootMode (
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ );
+
/**
This function reset the entire platform, including all processor and devices, and
reboots the system.
--
2.21.0.windows.1
next prev parent reply other threads:[~2019-07-18 23:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 23:00 [edk2-platforms Patch 0/5] Vlv2Tbl2DevicePkg: Remove Linux/Windows differences Michael D Kinney
2019-07-18 23:00 ` Michael D Kinney [this message]
2019-07-19 3:18 ` [edk2-devel] [edk2-platforms Patch 1/5] Vlv2TbltDevicePkg/PlatformPei: Add boot mode detection Sun, Zailiang
2019-07-18 23:00 ` [edk2-platforms Patch 2/5] Vlv2TbltDevicePkg: Convert use of FCE tool to Structured PCD Michael D Kinney
2019-07-19 3:18 ` [edk2-devel] " Sun, Zailiang
2019-07-19 3:40 ` Liming Gao
2019-07-19 6:04 ` Michael D Kinney
2019-07-19 6:40 ` Liming Gao
2019-07-19 15:50 ` Michael D Kinney
2019-07-20 15:11 ` Liming Gao
2019-07-18 23:00 ` [edk2-platforms Patch 3/5] Vlv2TbltDevicePkg: Remove Linux/GCC specific DSC/FDF files Michael D Kinney
2019-07-19 3:19 ` Sun, Zailiang
2019-07-18 23:00 ` [edk2-platforms Patch 4/5] Vlv2TbltDevicePkg: Convert BAT/sh Capsule scripts to Python Michael D Kinney
2019-07-19 3:19 ` [edk2-devel] " Sun, Zailiang
2019-07-18 23:00 ` [edk2-platforms Patch 5/5] Vlv2Tbl2DevicePkg: Convert BAT/sh Build " Michael D Kinney
2019-07-18 23:03 ` [edk2-devel] [edk2-platforms Patch 0/5] Vlv2Tbl2DevicePkg: Remove Linux/Windows differences Michael D Kinney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190718230017.14852-2-michael.d.kinney@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox