* [edk2-platforms: PATCH v3 0/1] Platform/RPi3: Add Debian 10 installation in Systems.md
@ 2019-08-08 12:39 Pete Batard
2019-08-08 12:39 ` [edk2-platforms: PATCH v3 1/1] " Pete Batard
0 siblings, 1 reply; 3+ messages in thread
From: Pete Batard @ 2019-08-08 12:39 UTC (permalink / raw)
To: devel; +Cc: ard.biesheuvel, leif.lindholm
Changes from v2:
- Use "on-CPU" rather than "ondie".
- Make sure the options to force FAT16 are provided for both Windows and Linux.
- Provide a maximum size for FAT16 and add a forward references to the additional
notes and the `fdisk` fixup, for people who might still choose FAT32.
Pete Batard (1):
Platform/RPi3: Add Debian 10 installation in Systems.md
Platform/RaspberryPi/RPi3/RPi3.fdf | 2 +-
Platform/RaspberryPi/RPi3/Readme.md | 4 +-
Platform/RaspberryPi/RPi3/Systems.md | 127 +++++++++++++++++++-
3 files changed, 126 insertions(+), 7 deletions(-)
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [edk2-platforms: PATCH v3 1/1] Platform/RPi3: Add Debian 10 installation in Systems.md
2019-08-08 12:39 [edk2-platforms: PATCH v3 0/1] Platform/RPi3: Add Debian 10 installation in Systems.md Pete Batard
@ 2019-08-08 12:39 ` Pete Batard
2019-08-08 13:51 ` Leif Lindholm
0 siblings, 1 reply; 3+ messages in thread
From: Pete Batard @ 2019-08-08 12:39 UTC (permalink / raw)
To: devel; +Cc: ard.biesheuvel, leif.lindholm
This documents the installation of vanilla Debian 10.0 ARM64 (netinst),
which we validated for both Model B and Model B+.
Also fix an erroneous reference in an RPi3.fdf comment.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/RPi3/RPi3.fdf | 2 +-
Platform/RaspberryPi/RPi3/Readme.md | 4 +-
Platform/RaspberryPi/RPi3/Systems.md | 127 +++++++++++++++++++-
3 files changed, 126 insertions(+), 7 deletions(-)
diff --git a/Platform/RaspberryPi/RPi3/RPi3.fdf b/Platform/RaspberryPi/RPi3/RPi3.fdf
index c7c3f7a2ab8c..c62d649834c7 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.fdf
+++ b/Platform/RaspberryPi/RPi3/RPi3.fdf
@@ -300,7 +300,7 @@ [FV.FvMain]
INF Platform/RaspberryPi/$(PLATFORM_NAME)/Drivers/LogoDxe/LogoDxe.inf
#
- # FDT (GUID matches mRaspberryPiFfsFileGuid in RaspberryPiPlatformDxe)
+ # FDT (GUID matches gRaspberryPiFdtFileGuid in FdtDxe)
#
FILE FREEFORM = DF5DA223-1D27-47C3-8D1B-9A41B55A18BC {
SECTION RAW = Platform/RaspberryPi/$(PLATFORM_NAME)/DeviceTree/bcm2710-rpi-3-b.dtb
diff --git a/Platform/RaspberryPi/RPi3/Readme.md b/Platform/RaspberryPi/RPi3/Readme.md
index 624f3a8d287a..797da1bab4a9 100644
--- a/Platform/RaspberryPi/RPi3/Readme.md
+++ b/Platform/RaspberryPi/RPi3/Readme.md
@@ -18,8 +18,8 @@ Raspberry Pi is a trademark of the [Raspberry Pi Foundation](http://www.raspberr
This firmware, that has been validated to compile against the current
[edk2](https://github.com/tianocore/edk2)/[edk2-platforms](https://github.com/tianocore/edk2-platforms),
-should be able to boot Linux (SUSE, Ubuntu), NetBSD, FreeBSD as well as Windows 10 ARM64
-(full GUI version).
+should be able to boot Linux (Debian, Ubuntu, SUSE), NetBSD, FreeBSD as well as Windows
+10 ARM64 (full GUI version).
It also provides support for ATF ([Arm Trusted Platform](https://github.com/ARM-software/arm-trusted-firmware)).
diff --git a/Platform/RaspberryPi/RPi3/Systems.md b/Platform/RaspberryPi/RPi3/Systems.md
index f6410eb25f0d..3a313c29cbdc 100644
--- a/Platform/RaspberryPi/RPi3/Systems.md
+++ b/Platform/RaspberryPi/RPi3/Systems.md
@@ -1,5 +1,128 @@
# Tested Operating Systems
+## Debian
+
+[Debian 10](https://cdimage.debian.org/debian-cd/current/arm64/iso-cd/) netinst has been
+tested and confirmed to work, both on the Model B and Model B+, including installation in
+either wired or wireless mode.
+
+Below are steps you can follow to install Debian 10 onto an SD card:
+* Partition the media as MBR and create a ~300 MB partition on it with MBR type `0x0e`.
+ __Note:__ Make sure that the partition scheme is MBR (not GPT) and the type `0x0e` (not
+ `0xef` for instance), as the on-CPU Broadcom bootloader supports neither the GPT scheme
+ nor the ESP MBR type.
+* Set the partition as active/bootable. This is needed as the Debian partition manager can
+ not detect it as ESP otherwise, which we need for GRUB installation. If using `fdisk` on
+ Linux, you can use the `a` command to set a partition as active. On Windows, you can use
+ `diskpart` and then type `active` after selecting the relevant disk and partition.
+* Format the partition as FAT. Here you should make sure that you use FAT16 over FAT32 else
+ the Debian partition manager may not automatically detect the partition as ESP. If you
+ are using Windows `diskpart` then `format fs=fat quick` will format a drive to FAT16. On
+ Linux, the equivalent command would be `mkfs.vfat -F 16 /dev/<your_device>`. As long as
+ the partition is smaller than 2 GB, the use of FAT16 over FAT32 should not be a problem.
+ Note that it is also possible to use FAT32, but you will probably have to invoke `fdisk`
+ before rebooting, as shown in the _Additional Notes_ below, to reset the partition type.
+* Copy the UEFI firmware files (`RPI_EFI.fd`, `bootcode.bin`, `fixup.dat` and `start.elf`)
+ as well as an appropriate `config.txt` onto the FAT partition. If needed you can download
+ the non UEFI binary files from https://github.com/raspberrypi/firmware/tree/master/boot.
+* (Optional) If you plan to install through WiFi, you will need to download relevant
+ non-free WLAN firmware binaries from your WLAN interface (`brcmfmac43430-sdio.txt` and
+ `brcmfmac43430-sdio.bin` for a Raspberry Pi 3 Model B, `brcmfmac43455-sdio.txt` and
+ `brcmfmac43455-sdio.bin` for a Raspberry Pi 3 Model B+). You may also want to obtain the
+ relevant `.clm_blob` (`brcmfmac43430-sdio.clm_blob` or `brcmfmac43455-sdio.clm_blob`),
+ though wireless networking should work even if you do not provide these files. Copy these
+ files either at the root of your FAT partition or into a `firmware/` directory there.
+* Download the latest `debian-##.#.#-arm64-netinst.iso` from
+ https://cdimage.debian.org/debian-cd/current/arm64/iso-cd/
+* Extract the full content of the ISO onto the FAT partition you created.
+* Insert the media and power up the Raspberry Pi device.
+* On the GRUB menu select `Install` and let the Debian Installer process start.
+ __Note:__ In case anything goes wrong during the install process, you can use
+ <kbd>Alt</kbd>-<kbd>F4</kbd> to check the installation log.
+* Select your Language, Country and Keyboard and let the installer proceed until it reports
+ that `No Common CD-ROM drive was detected.`
+* On `Load CD-ROM drivers from removable media` select `No`.
+* On `Manually select a CD-ROM module and device` select `Yes`.
+* On `Module needed for accessing the CD-ROM` select `none`.
+* On `Device file for accessing the CD-ROM` type the following exactly:
+ ```
+ -t vfat -o rw /dev/mmcblk0p1
+ ```
+* (Optional) If you have copied the non-free WLAN firmware binaries, and plan to install
+ through wireless, you can let the installer select the firmware files. Please be mindful
+ that you may be asked multiple times as there are multiple files to provide.
+* If requested by the installer, set up your network by choosing the network interface you
+ want to use for installation and (optionally) your access point and credentials.
+* Go through the hostname, user/password set up and customize those as you see fit.
+* Let the installer continue until you get to the `Partition disks` screen. There, for
+ `Partitioning method` select `Manual`. You __should__ see something like this:
+ ```
+ MMC/SD card #1 (mmcblk0) - 16.0 GB SD 2WCGO
+ #1 primary 314.6 MB B K ESP
+ pri/log FREE SPACE
+ ```
+ In other words, the partition manager should already detect your existing partition as
+ `ESP`, with the `B` (bootable) and `K` (keep data) flags. If that is not the case, (e.g.
+ if it says `fat16` or `fat32` instead of `ESP`) then it probably means you either didn't
+ format the partition to FAT16 or you forgot to set the bootable flag. In that case,
+ please refer to the _Additional Notes_ below.
+* Select `FREE SPACE` → `Create a new partition` and create a `1 GB` primary `swap`
+ partition.
+* Select `FREE SPACE` → `Create a new partition` and allocate the rest to a primary
+ `ext4` root partition (mountpoint = `/`)
+* After doing the above, your partition report should look like this:
+ ```
+ MMC/SD card #1 (mmcblk0) - 16.0 GB SD 2WCGO
+ #1 primary 314.6 MB B K ESP
+ #2 primary 1.0 GB f swap swap
+ #3 primary 14.7 GB f ext4 /
+ ```
+* Select `Finish partitioning and write changes to disk` and then `Yes` and let the
+ installer continue with the base system installation.
+* After a while, the installer should produce a message that states:
+ ```
+ [!!] Configure the package manager
+
+ apt-configuration problem
+ An attempt to configure apt to install additional packages from the CD failed.
+ ```
+ This is a __benign__ message that you can safely ignore by selecting `Continue` (The
+ reason it is benign is we are running a net install and won't need to access the "CD-ROM"
+ files post install).
+* Once you have dimissed the message above, pick the mirror closest to your geographical
+ location and let the installer proceed with some more software installation.
+* Finally, at the `Software selection` screen, choose any additional software package you
+ wish to install. `Debian desktop environment` should work out of the box if you choose to
+ install it.
+* Let the process finalize the software and GRUB bootloader installation and, provided you
+ didn't run into the partition manager issue described above (installation partition not
+ seen as `ESP`) you can reboot your machine when prompted, which, once completed, should
+ bring you to your newly installed Debian environment.
+
+### Additional Notes for Debian
+
+The reason we use `-t vfat -o rw /dev/mmcblk0p1` for the source media (i.e. "CD-ROM" device)
+is because, whereas the first partition on the SD card is indeed `/dev/mmcblk0p1`, we also
+need to provide additional parameters for the `mount` command that the installer invokes
+behind the scenes. For instance, if we don't use `-t vfat`, then ISO-9660 is forced as the
+file system, and if we don't use `-o rw` then the partition will be mounted as read-only
+which then prevents the same partition from being remounted when locating the non-free
+firmware files or when setting up `/efi/boot`.
+
+With regards to fixing the partitioning if you don't see `B K ESP` when entering the
+partition manager, what you need to do is:
+* Before you create the additional partitions, select the first partition and change its
+ type to `ESP`. Note however that doing this changes the type of the partition to `0xef`
+ which is precisely what we're trying to avoid by having the partition manager already
+ detect it as ESP, as type `0xef` is __unbootable__ by the Broadcom CPU.
+* To fix this then, before you choose `Continue` on the `Installation complete` prompt you
+ should open a new console with <kbd>Alt</kbd>-<kbd>F2</kbd> and type:
+ ```
+ chroot /target fdisk /dev/mmcblk0
+ ```
+ Then press <kbd>t</kbd>, <kbd>1</kbd>, <kbd>e</kbd> <kbd>w</kbd>, to reset the partition
+ to type `0x0e` (FAT16 LBA).
+
## Ubuntu
[Ubuntu 18.04 LTS](http://releases.ubuntu.com/18.04/) has been tested and confirmed to work,
@@ -35,10 +158,6 @@ Then, to have your changes applied run `update-grub` and reboot.
## Other Linux distributions
-* Debian ARM64 does not currently work, most likely due to missing required module support
- in its kernel. However its installation process works, so it may be possible to get it
- running with a custom kernel.
-
* OpenSUSE Leap 42.3 has been reported to work on Raspberry 3 Model B.
* Other ARM64 Linux releases, that support UEFI boot and have the required hardware support
--
2.21.0.windows.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [edk2-platforms: PATCH v3 1/1] Platform/RPi3: Add Debian 10 installation in Systems.md
2019-08-08 12:39 ` [edk2-platforms: PATCH v3 1/1] " Pete Batard
@ 2019-08-08 13:51 ` Leif Lindholm
0 siblings, 0 replies; 3+ messages in thread
From: Leif Lindholm @ 2019-08-08 13:51 UTC (permalink / raw)
To: Pete Batard; +Cc: devel, ard.biesheuvel
On Thu, Aug 08, 2019 at 01:39:51PM +0100, Pete Batard wrote:
> This documents the installation of vanilla Debian 10.0 ARM64 (netinst),
> which we validated for both Model B and Model B+.
> Also fix an erroneous reference in an RPi3.fdf comment.
If it happens again that I get an unrelated .fdf comment update in a
documentation patch, I'm probably going to object. But I'll let this
one slip :)
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Pushed as 86ef5b3e5d88.
Thanks!
> Signed-off-by: Pete Batard <pete@akeo.ie>
> ---
> Platform/RaspberryPi/RPi3/RPi3.fdf | 2 +-
> Platform/RaspberryPi/RPi3/Readme.md | 4 +-
> Platform/RaspberryPi/RPi3/Systems.md | 127 +++++++++++++++++++-
> 3 files changed, 126 insertions(+), 7 deletions(-)
>
> diff --git a/Platform/RaspberryPi/RPi3/RPi3.fdf b/Platform/RaspberryPi/RPi3/RPi3.fdf
> index c7c3f7a2ab8c..c62d649834c7 100644
> --- a/Platform/RaspberryPi/RPi3/RPi3.fdf
> +++ b/Platform/RaspberryPi/RPi3/RPi3.fdf
> @@ -300,7 +300,7 @@ [FV.FvMain]
> INF Platform/RaspberryPi/$(PLATFORM_NAME)/Drivers/LogoDxe/LogoDxe.inf
>
> #
> - # FDT (GUID matches mRaspberryPiFfsFileGuid in RaspberryPiPlatformDxe)
> + # FDT (GUID matches gRaspberryPiFdtFileGuid in FdtDxe)
> #
> FILE FREEFORM = DF5DA223-1D27-47C3-8D1B-9A41B55A18BC {
> SECTION RAW = Platform/RaspberryPi/$(PLATFORM_NAME)/DeviceTree/bcm2710-rpi-3-b.dtb
> diff --git a/Platform/RaspberryPi/RPi3/Readme.md b/Platform/RaspberryPi/RPi3/Readme.md
> index 624f3a8d287a..797da1bab4a9 100644
> --- a/Platform/RaspberryPi/RPi3/Readme.md
> +++ b/Platform/RaspberryPi/RPi3/Readme.md
> @@ -18,8 +18,8 @@ Raspberry Pi is a trademark of the [Raspberry Pi Foundation](http://www.raspberr
>
> This firmware, that has been validated to compile against the current
> [edk2](https://github.com/tianocore/edk2)/[edk2-platforms](https://github.com/tianocore/edk2-platforms),
> -should be able to boot Linux (SUSE, Ubuntu), NetBSD, FreeBSD as well as Windows 10 ARM64
> -(full GUI version).
> +should be able to boot Linux (Debian, Ubuntu, SUSE), NetBSD, FreeBSD as well as Windows
> +10 ARM64 (full GUI version).
>
> It also provides support for ATF ([Arm Trusted Platform](https://github.com/ARM-software/arm-trusted-firmware)).
>
> diff --git a/Platform/RaspberryPi/RPi3/Systems.md b/Platform/RaspberryPi/RPi3/Systems.md
> index f6410eb25f0d..3a313c29cbdc 100644
> --- a/Platform/RaspberryPi/RPi3/Systems.md
> +++ b/Platform/RaspberryPi/RPi3/Systems.md
> @@ -1,5 +1,128 @@
> # Tested Operating Systems
>
> +## Debian
> +
> +[Debian 10](https://cdimage.debian.org/debian-cd/current/arm64/iso-cd/) netinst has been
> +tested and confirmed to work, both on the Model B and Model B+, including installation in
> +either wired or wireless mode.
> +
> +Below are steps you can follow to install Debian 10 onto an SD card:
> +* Partition the media as MBR and create a ~300 MB partition on it with MBR type `0x0e`.
> + __Note:__ Make sure that the partition scheme is MBR (not GPT) and the type `0x0e` (not
> + `0xef` for instance), as the on-CPU Broadcom bootloader supports neither the GPT scheme
> + nor the ESP MBR type.
> +* Set the partition as active/bootable. This is needed as the Debian partition manager can
> + not detect it as ESP otherwise, which we need for GRUB installation. If using `fdisk` on
> + Linux, you can use the `a` command to set a partition as active. On Windows, you can use
> + `diskpart` and then type `active` after selecting the relevant disk and partition.
> +* Format the partition as FAT. Here you should make sure that you use FAT16 over FAT32 else
> + the Debian partition manager may not automatically detect the partition as ESP. If you
> + are using Windows `diskpart` then `format fs=fat quick` will format a drive to FAT16. On
> + Linux, the equivalent command would be `mkfs.vfat -F 16 /dev/<your_device>`. As long as
> + the partition is smaller than 2 GB, the use of FAT16 over FAT32 should not be a problem.
> + Note that it is also possible to use FAT32, but you will probably have to invoke `fdisk`
> + before rebooting, as shown in the _Additional Notes_ below, to reset the partition type.
> +* Copy the UEFI firmware files (`RPI_EFI.fd`, `bootcode.bin`, `fixup.dat` and `start.elf`)
> + as well as an appropriate `config.txt` onto the FAT partition. If needed you can download
> + the non UEFI binary files from https://github.com/raspberrypi/firmware/tree/master/boot.
> +* (Optional) If you plan to install through WiFi, you will need to download relevant
> + non-free WLAN firmware binaries from your WLAN interface (`brcmfmac43430-sdio.txt` and
> + `brcmfmac43430-sdio.bin` for a Raspberry Pi 3 Model B, `brcmfmac43455-sdio.txt` and
> + `brcmfmac43455-sdio.bin` for a Raspberry Pi 3 Model B+). You may also want to obtain the
> + relevant `.clm_blob` (`brcmfmac43430-sdio.clm_blob` or `brcmfmac43455-sdio.clm_blob`),
> + though wireless networking should work even if you do not provide these files. Copy these
> + files either at the root of your FAT partition or into a `firmware/` directory there.
> +* Download the latest `debian-##.#.#-arm64-netinst.iso` from
> + https://cdimage.debian.org/debian-cd/current/arm64/iso-cd/
> +* Extract the full content of the ISO onto the FAT partition you created.
> +* Insert the media and power up the Raspberry Pi device.
> +* On the GRUB menu select `Install` and let the Debian Installer process start.
> + __Note:__ In case anything goes wrong during the install process, you can use
> + <kbd>Alt</kbd>-<kbd>F4</kbd> to check the installation log.
> +* Select your Language, Country and Keyboard and let the installer proceed until it reports
> + that `No Common CD-ROM drive was detected.`
> +* On `Load CD-ROM drivers from removable media` select `No`.
> +* On `Manually select a CD-ROM module and device` select `Yes`.
> +* On `Module needed for accessing the CD-ROM` select `none`.
> +* On `Device file for accessing the CD-ROM` type the following exactly:
> + ```
> + -t vfat -o rw /dev/mmcblk0p1
> + ```
> +* (Optional) If you have copied the non-free WLAN firmware binaries, and plan to install
> + through wireless, you can let the installer select the firmware files. Please be mindful
> + that you may be asked multiple times as there are multiple files to provide.
> +* If requested by the installer, set up your network by choosing the network interface you
> + want to use for installation and (optionally) your access point and credentials.
> +* Go through the hostname, user/password set up and customize those as you see fit.
> +* Let the installer continue until you get to the `Partition disks` screen. There, for
> + `Partitioning method` select `Manual`. You __should__ see something like this:
> + ```
> + MMC/SD card #1 (mmcblk0) - 16.0 GB SD 2WCGO
> + #1 primary 314.6 MB B K ESP
> + pri/log FREE SPACE
> + ```
> + In other words, the partition manager should already detect your existing partition as
> + `ESP`, with the `B` (bootable) and `K` (keep data) flags. If that is not the case, (e.g.
> + if it says `fat16` or `fat32` instead of `ESP`) then it probably means you either didn't
> + format the partition to FAT16 or you forgot to set the bootable flag. In that case,
> + please refer to the _Additional Notes_ below.
> +* Select `FREE SPACE` → `Create a new partition` and create a `1 GB` primary `swap`
> + partition.
> +* Select `FREE SPACE` → `Create a new partition` and allocate the rest to a primary
> + `ext4` root partition (mountpoint = `/`)
> +* After doing the above, your partition report should look like this:
> + ```
> + MMC/SD card #1 (mmcblk0) - 16.0 GB SD 2WCGO
> + #1 primary 314.6 MB B K ESP
> + #2 primary 1.0 GB f swap swap
> + #3 primary 14.7 GB f ext4 /
> + ```
> +* Select `Finish partitioning and write changes to disk` and then `Yes` and let the
> + installer continue with the base system installation.
> +* After a while, the installer should produce a message that states:
> + ```
> + [!!] Configure the package manager
> +
> + apt-configuration problem
> + An attempt to configure apt to install additional packages from the CD failed.
> + ```
> + This is a __benign__ message that you can safely ignore by selecting `Continue` (The
> + reason it is benign is we are running a net install and won't need to access the "CD-ROM"
> + files post install).
> +* Once you have dimissed the message above, pick the mirror closest to your geographical
> + location and let the installer proceed with some more software installation.
> +* Finally, at the `Software selection` screen, choose any additional software package you
> + wish to install. `Debian desktop environment` should work out of the box if you choose to
> + install it.
> +* Let the process finalize the software and GRUB bootloader installation and, provided you
> + didn't run into the partition manager issue described above (installation partition not
> + seen as `ESP`) you can reboot your machine when prompted, which, once completed, should
> + bring you to your newly installed Debian environment.
> +
> +### Additional Notes for Debian
> +
> +The reason we use `-t vfat -o rw /dev/mmcblk0p1` for the source media (i.e. "CD-ROM" device)
> +is because, whereas the first partition on the SD card is indeed `/dev/mmcblk0p1`, we also
> +need to provide additional parameters for the `mount` command that the installer invokes
> +behind the scenes. For instance, if we don't use `-t vfat`, then ISO-9660 is forced as the
> +file system, and if we don't use `-o rw` then the partition will be mounted as read-only
> +which then prevents the same partition from being remounted when locating the non-free
> +firmware files or when setting up `/efi/boot`.
> +
> +With regards to fixing the partitioning if you don't see `B K ESP` when entering the
> +partition manager, what you need to do is:
> +* Before you create the additional partitions, select the first partition and change its
> + type to `ESP`. Note however that doing this changes the type of the partition to `0xef`
> + which is precisely what we're trying to avoid by having the partition manager already
> + detect it as ESP, as type `0xef` is __unbootable__ by the Broadcom CPU.
> +* To fix this then, before you choose `Continue` on the `Installation complete` prompt you
> + should open a new console with <kbd>Alt</kbd>-<kbd>F2</kbd> and type:
> + ```
> + chroot /target fdisk /dev/mmcblk0
> + ```
> + Then press <kbd>t</kbd>, <kbd>1</kbd>, <kbd>e</kbd> <kbd>w</kbd>, to reset the partition
> + to type `0x0e` (FAT16 LBA).
> +
> ## Ubuntu
>
> [Ubuntu 18.04 LTS](http://releases.ubuntu.com/18.04/) has been tested and confirmed to work,
> @@ -35,10 +158,6 @@ Then, to have your changes applied run `update-grub` and reboot.
>
> ## Other Linux distributions
>
> -* Debian ARM64 does not currently work, most likely due to missing required module support
> - in its kernel. However its installation process works, so it may be possible to get it
> - running with a custom kernel.
> -
> * OpenSUSE Leap 42.3 has been reported to work on Raspberry 3 Model B.
>
> * Other ARM64 Linux releases, that support UEFI boot and have the required hardware support
> --
> 2.21.0.windows.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-08-08 13:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-08-08 12:39 [edk2-platforms: PATCH v3 0/1] Platform/RPi3: Add Debian 10 installation in Systems.md Pete Batard
2019-08-08 12:39 ` [edk2-platforms: PATCH v3 1/1] " Pete Batard
2019-08-08 13:51 ` Leif Lindholm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox