From: "Kubacki, Michael A" <michael.a.kubacki@intel.com>
To: devel@edk2.groups.io
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>,
Chasel Chiu <chasel.chiu@intel.com>,
Nate DeSimone <nathaniel.l.desimone@intel.com>,
Liming Gao <liming.gao@intel.com>,
Michael D Kinney <michael.d.kinney@intel.com>,
Ankit Sinha <ankit.sinha@intel.com>
Subject: [edk2-platforms][PATCH V1 13/37] CoffeelakeSiliconPkg/SystemAgent: Add Include headers
Date: Fri, 16 Aug 2019 17:15:39 -0700 [thread overview]
Message-ID: <20190817001603.30632-14-michael.a.kubacki@intel.com> (raw)
In-Reply-To: <20190817001603.30632-1-michael.a.kubacki@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2082
Adds header files common to System Agent (SA) modules.
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
---
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GnaConfig.h | 33 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsDxeConfig.h | 53 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiConfig.h | 96 ++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiPreMemConfig.h | 70 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/IpuPreMemConfig.h | 46 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryConfig.h | 534 ++++++++++++++++++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryDxeConfig.h | 61 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MiscDxeConfig.h | 33 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/OverClockingConfig.h | 51 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PcieDxeConfig.h | 135 +++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiConfig.h | 60 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiPreMemConfig.h | 354 +++++++++++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiConfig.h | 61 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h | 103 ++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SwitchableGraphicsConfig.h | 63 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VbiosDxeConfig.h | 39 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VtdConfig.h | 42 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/DmaRemappingTable.h | 77 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/DxeSaPolicyLib.h | 60 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/PeiSaPolicyLib.h | 87 ++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/SaPlatformLib.h | 88 ++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/MemInfoHob.h | 259 ++++++++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/GraphicsInitLib.h | 15 +
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/LegacyRegion.h | 33 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/PeiCpuTraceHubLib.h | 23 +
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/SaPcieLib.h | 70 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaIotrapSmi.h | 36 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaNvsArea.h | 31 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaConfigHob.h | 89 ++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaNvsAreaDef.h | 151 ++++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopComponentName2.h | 63 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopPolicy.h | 73 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/IgdOpRegion.h | 24 +
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/MemInfo.h | 132 +++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/SaPolicy.h | 66 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsGna.h | 32 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsHostBridge.h | 214 ++++++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIgd.h | 50 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIpu.h | 37 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsPeg.h | 64 +++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaAccess.h | 106 ++++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaCommonDefinitions.h | 23 +
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPciExpressLib.h | 25 +
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPolicyCommon.h | 51 ++
Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaRegs.h | 32 ++
45 files changed, 3845 insertions(+)
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GnaConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GnaConfig.h
new file mode 100644
index 0000000000..020a4aeab5
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GnaConfig.h
@@ -0,0 +1,33 @@
+/** @file
+ Policy definition for GNA Config Block
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GNA_CONFIG_H_
+#define _GNA_CONFIG_H_
+#pragma pack(push, 1)
+
+#define GNA_CONFIG_REVISION 1
+/**
+ GNA config block for configuring GNA.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0
+ This policy enables the GNA Device (SA Device 8) if supported.
+ If FALSE, all other policies in this config block will be ignored.
+ <b>1=TRUE</b>;
+ 0=FALSE.
+ **/
+ UINT32 GnaEnable : 1;
+ UINT32 RsvdBits0 : 31; ///< Offset 28:1 :Reserved for future use
+} GNA_CONFIG;
+#pragma pack(pop)
+
+#endif // _GNA_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsDxeConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsDxeConfig.h
new file mode 100644
index 0000000000..cc337a83f3
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsDxeConfig.h
@@ -0,0 +1,53 @@
+/** @file
+ Graphics DXE Policy definitions
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GRAPHICS_DXE_CONFIG_H_
+#define _GRAPHICS_DXE_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#define GRAPHICS_DXE_CONFIG_REVISION 2
+
+#define MAX_BCLM_ENTRIES 20
+
+/**
+ This configuration block is to configure IGD related variables used in DXE.
+ If Intel Gfx Device is not supported or disabled, all policies will be ignored.
+ The data elements should be initialized by a Platform Module.\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Adding BCLM[MAX_BCLM_ENTRIES]
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27: Config Block Header
+ UINT32 Size; ///< Offset 28 - 31: This field gives the size of the GOP VBT Data buffer
+ EFI_PHYSICAL_ADDRESS VbtAddress; ///< Offset 32 - 39: This field points to the GOP VBT data buffer
+ UINT8 PlatformConfig; ///< Offset 40: This field gives the Platform Configuration Information (0=Platform is S0ix Capable for ULT SKUs only, <b>1=Platform is not S0ix Capable</b>, 2=Force Platform is S0ix Capable for All SKUs)
+ UINT8 AlsEnable; ///< Offset 41: Ambient Light Sensor Enable: <b>0=Disable</b>, 2=Enable
+ UINT8 BacklightControlSupport; ///< Offset 42: Backlight Control Support: 0=PWM Inverted, <b>2=PWM Normal</b>
+ UINT8 IgdBootType; ///< Offset 43: IGD Boot Type CMOS option: <b>0=Default</b>, 0x01=CRT, 0x04=EFP, 0x08=LFP, 0x20=EFP3, 0x40=EFP2, 0x80=LFP2
+ UINT32 IuerStatusVal; ///< Offset 44 - 47: Offset 16 This field holds the current status of all the supported Ultrabook events (Intel(R) Ultrabook Event Status bits)
+ CHAR16 GopVersion[0x10]; ///< Offset 48 - 79:This field holds the GOP Driver Version. It is an Output Protocol and updated by the Silicon code
+ /**
+ Offset 80: IGD Panel Type CMOS option\n
+ <b>0=Default</b>, 1=640X480LVDS, 2=800X600LVDS, 3=1024X768LVDS, 4=1280X1024LVDS, 5=1400X1050LVDS1\n
+ 6=1400X1050LVDS2, 7=1600X1200LVDS, 8=1280X768LVDS, 9=1680X1050LVDS, 10=1920X1200LVDS, 13=1600X900LVDS\n
+ 14=1280X800LVDS, 15=1280X600LVDS, 16=2048X1536LVDS, 17=1366X768LVDS
+ **/
+ UINT8 IgdPanelType;
+ UINT8 IgdPanelScaling; ///< Offset 81: IGD Panel Scaling: <b>0=AUTO</b>, 1=OFF, 6=Force scaling
+ UINT8 IgdBlcConfig; ///< Offset 82: Backlight Control Support: 0=PWM Inverted, <b>2=PWM Normal</b>
+ UINT8 IgdDvmtMemSize; ///< Offset 83: IGD DVMT Memory Size: 1=128MB, <b>2=256MB</b>, 3=MAX
+ UINT8 GfxTurboIMON; ///< Offset 84: IMON Current Value: 14=Minimal, <b>31=Maximum</b>
+ UINT8 Reserved[3]; ///< Offset 85: Reserved for DWORD alignment.
+ UINT16 BCLM[MAX_BCLM_ENTRIES]; ///< Offset 88: IGD Backlight Brightness Level Duty cycle Mapping Table.
+} GRAPHICS_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _GRAPHICS_DXE_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiConfig.h
new file mode 100644
index 0000000000..276289ae81
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiConfig.h
@@ -0,0 +1,96 @@
+/** @file
+ Policy definition for Internal Graphics Config Block (PostMem)
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GRAPHICS_PEI_CONFIG_H_
+#define _GRAPHICS_PEI_CONFIG_H_
+#pragma pack(push, 1)
+
+#define GRAPHICS_PEI_CONFIG_REVISION 4
+#define DDI_DEVICE_NUMBER 4
+
+//
+// DDI defines
+//
+typedef enum {
+ DdiDisable = 0x00,
+ DdiDdcEnable = 0x01,
+ DdiTbtLsxEnable = 0x02,
+} DDI_DDC_TBT_VAL;
+
+typedef enum {
+ DdiHpdDisable = 0x00,
+ DdiHpdEnable = 0x01,
+} DDI_HPD_VAL;
+
+typedef enum {
+ DdiPortADisabled = 0x00,
+ DdiPortAEdp = 0x01,
+ DdiPortAMipiDsi = 0x02,
+} DDI_PORTA_SETTINGS;
+/**
+ This structure configures the Native GPIOs for DDI port per VBT settings.
+**/
+typedef struct {
+ UINT8 DdiPortEdp; /// The setting of eDP port, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortBHpd; /// The HPD setting of DDI Port B, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortCHpd; /// The HPD setting of DDI Port C, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortDHpd; /// The HPD setting of DDI Port D, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortFHpd; /// The HPD setting of DDI Port F, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortBDdc; /// The DDC setting of DDI Port B, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortCDdc; /// The DDC setting of DDI Port C, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortDDdc; /// The DDC setting of DDI Port D, this settings must match VBT's settings. 0- Disable, <b>1- Enable</b>
+ UINT8 DdiPortFDdc; /// The DDC setting of DDI Port F, this settings must match VBT's settings. <b>0- Disable</b>, 1- Enable
+ UINT8 Rsvd[3]; ///< Reserved for 4 bytes alignment
+} DDI_CONFIGURATION;
+
+/**
+ This configuration block is to configure IGD related variables used in PostMem PEI.
+ If Intel Gfx Device is not supported, all policies can be ignored.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Added SkipS3CdClockInit.
+ <b>Revision 3</b>:
+ - Added DeltaT12PowerCycleDelay, BltBufferAddress, BltBufferSize.
+ <b>Revision 4</b>:
+ - Deprecated DeltaT12PowerCycleDelay.
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT32 RenderStandby : 1; ///< Offset 28:0 :<b>(Test)</b> This field is used to enable or disable RC6 (Render Standby): 0=FALSE, <b>1=TRUE</b>
+ UINT32 PmSupport : 1; ///< Offset 28:1 :<b>(Test)</b> IGD PM Support TRUE/FALSE: 0=FALSE, <b>1=TRUE</b>
+ UINT32 PavpEnable : 1; ///< Offset 28:2 :IGD PAVP TRUE/FALSE: 0=FALSE, <b>1=TRUE</b>
+ /**
+ Offset 28:3
+ CdClock Frequency select\n
+ CFL\n
+ 0 = 337.5 Mhz, 1 = 450 Mhz,\n
+ 2 = 540 Mhz,<b> 3 = 675 Mhz</b>,\n
+
+ **/
+ UINT32 CdClock : 3;
+ UINT32 PeiGraphicsPeimInit: 1; ///< Offset 28:6 : This policy is used to enable/disable Intel Gfx PEIM.<b>0- Disable</b>, 1- Enable
+ UINT32 CdynmaxClampEnable : 1; ///< Offset 28:7 : This policy is used to enable/disable CDynmax Clamping Feature (CCF) <b>1- Enable</b>, 0- Disable
+ UINT32 GtFreqMax : 8; ///< Offset 28:8 : <b>(Test)</b> Max GT frequency limited by user in multiples of 50MHz: Default value which indicates normal frequency is <b>0xFF</b>
+ UINT32 DisableTurboGt : 1; ///< Offset 28:9 : This policy is used to enable/disable DisableTurboGt <b>0- Disable</b>, 1- Enable
+ UINT32 RsvdBits0 : 15; ///< Offser 28:15 :Reserved for future use
+ VOID* LogoPtr; ///< Offset 32 Address of Intel Gfx PEIM Logo to be displayed
+ UINT32 LogoSize; ///< Offset 36 Intel Gfx PEIM Logo Size
+ VOID* GraphicsConfigPtr; ///< Offset 40 Address of the Graphics Configuration Table
+ DDI_CONFIGURATION DdiConfiguration; ///< Offset 44 DDI configuration, need to match with VBT settings.
+ UINT32 SkipS3CdClockInit : 1; ///< Offset 56 SKip full CD clock initialization being done during S3 resume.<b>0- Disable<\b>, 1- Enable
+ UINT32 ReservedBits : 31; ///< Offset 56: 1 : Reserved for future use.
+ UINT16 DeltaT12PowerCycleDelay; ///< Offset 60 @deprecated Power Cycle Delay required for eDP as per VESA standard.<b>0 - 0 ms<\b>, 0xFFFF - Auto calculate to max 500 ms
+ UINT8 Reserved[2]; ///< Offset 62 Reserved for future use.
+ VOID* BltBufferAddress; ///< Offset 64 Address of Blt buffer for PEIM Logo use
+ UINT32 BltBufferSize; ///< Offset 68 The size for Blt Buffer, calculating by PixelWidth * PixelHeight * 4 bytes (the size of EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+} GRAPHICS_PEI_CONFIG;
+#pragma pack(pop)
+
+#endif // _GRAPHICS_PEI_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiPreMemConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiPreMemConfig.h
new file mode 100644
index 0000000000..4986fdab60
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/GraphicsPeiPreMemConfig.h
@@ -0,0 +1,70 @@
+/** @file
+ Policy definition for Internal Graphics Config Block (PreMem)
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GRAPHICS_PEI_PREMEM_CONFIG_H_
+#define _GRAPHICS_PEI_PREMEM_CONFIG_H_
+#pragma pack(push, 1)
+
+#define GRAPHICS_PEI_PREMEM_CONFIG_REVISION 2
+
+
+/**
+ This Configuration block is to configure GT related PreMem data/variables.\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Added DeltaT12PowerCycleDelayPreMem.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0
+ Selection of the primary display device: 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, <b>3=AUTO</b>, 4=Switchable Graphics\n
+ When AUTO mode selected, the priority of display devices is: PCIe Graphics on PCH > PEG > iGFX
+ **/
+ UINT32 PrimaryDisplay : 3;
+ /**
+ Offset 28:3
+ Intel Gfx Support. It controls enabling/disabling iGfx device.
+ When AUTO mode selected, iGFX will be turned off when external graphics detected.
+ If FALSE, all other polices can be ignored.
+ <b>2 = AUTO</b>;
+ 0 = FALSE;
+ 1 = TRUE.
+ **/
+ UINT32 InternalGraphics : 2;
+ /**
+ Offset 28:5
+ Pre-allocated memory for iGFX\n
+ 0 = 0MB,1 or 247 = 32MB,\n
+ 2 = 64MB,\n
+ 240 = 4MB, 241 = 8MB,\n
+ 242 = 12MB, 243 = 16MB,\n
+ 244 = 20MB, 245 = 24MB,\n
+ 246 = 28MB, 248 = 36MB,\n
+ 249 = 40MB, 250 = 44MB,\n
+ 251 = 48MB, 252 = 52MB,\n
+ 253 = 56MB,<b> 254 = 60MB</b>,\n
+ <b>Note: enlarging pre-allocated memory for iGFX may need to reduce MmioSize because of 4GB boundary limitation</b>
+ **/
+ UINT32 IgdDvmt50PreAlloc : 8;
+ UINT32 PanelPowerEnable : 1; ///< Offset 28:13 :<b>(Test)</b> Control for enabling/disabling VDD force bit (Required only for early enabling of eDP panel): 0=FALSE, <b>1=TRUE</b>
+ UINT32 ApertureSize : 7; ///< Offser 28:14 :Graphics aperture size (256MB is the recommended size as per BWG) : 0=128MB, <b>1=256MB</b>, 3=512MB, 7=1024MB, 15=2048MB.
+ UINT32 GtPsmiSupport : 1; ///< Offser 28:21 :PSMI support On/Off: <b>0=FALSE</b>, 1=TRUE
+ UINT32 PsmiRegionSize : 3; ///< Offser 28:22 :Psmi region size: <b>0=32MB</b>, 1=288MB, 2=544MB, 3=800MB, 4=1056MB
+ UINT32 RsvdBits0 : 7; ///< Offser 28:25 :Reserved for future use
+ UINT32 GttMmAdr; ///< Offset 32 Temp Address of System Agent GTTMMADR : Default is <b>0xCF000000< / b>
+ UINT16 GttSize; ///< Offset 36 Selection of iGFX GTT Memory size: 1=2MB, 2=4MB, <b>3=8MB</b>
+ UINT8 Rsvd1[2]; ///< Offset 38 Reserved for DWORD alignment
+ UINT32 GmAdr; ///< Offset 40 Temp Address of System Agent GMADR : Default is <b>0xD0000000< / b>
+ UINT16 DeltaT12PowerCycleDelayPreMem; ///< Offset 44 Power Cycle Delay required for eDP as per VESA standard.<b>0 - 0 ms<\b>, 0xFFFF - Auto calculate to max 500 ms
+ UINT8 Reserved[2]; ///< Offset 46 Reserved for future use.
+} GRAPHICS_PEI_PREMEM_CONFIG;
+#pragma pack(pop)
+
+#endif // _GRAPHICS_PEI_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/IpuPreMemConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/IpuPreMemConfig.h
new file mode 100644
index 0000000000..79025d16fe
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/IpuPreMemConfig.h
@@ -0,0 +1,46 @@
+/** @file
+ IPU policy definitions (PreMem)
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _IPU_CONFIG_PREMEM_H_
+#define _IPU_CONFIG_PREMEM_H_
+
+#pragma pack(push, 1)
+
+#define IPU_PREMEM_CONFIG_REVISION 1
+
+#define SA_IMR_IPU_CAMERA 0
+#define SA_IMR_IPU_GEN 1
+
+/**
+ IPU PreMem configuration\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0 :
+ <b>(Test)</b> It enables the SA IPU Device if supported and not fused off.
+ If FALSE, all other policies in this config block will be ignored.
+ <b>1=TRUE</b>;
+ 0=FALSE.
+ **/
+ UINT32 SaIpuEnable:1;
+ /**
+ Offset 28:1 :
+ <b>(Test)</b> It configure the IPU IMR to IPU Camera or IPU Gen when IPU is enabled.
+ If FALSE, all other policies in this config block will be ignored.
+ <b>0=IPU Camera</b>;
+ 1=IPU Gen
+ **/
+ UINT32 SaIpuImrConfiguration:1;
+ UINT32 RsvdBits0:30; /// Offset 28:2 :Reserved for future use.
+} IPU_PREMEM_CONFIG;
+#pragma pack(pop)
+
+#endif // _IPU_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryConfig.h
new file mode 100644
index 0000000000..8374ff5f68
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryConfig.h
@@ -0,0 +1,534 @@
+/** @file
+ Policy definition of Memory Config Block
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _MEMORY_CONFIG_H_
+#define _MEMORY_CONFIG_H_
+
+#include <SaRegs.h>
+
+#pragma pack(push, 1)
+
+#define SA_MRC_ITERATION_MAX (6)
+#define SA_MRC_MAX_RCOMP (3)
+#define SA_MRC_MAX_RCOMP_TARGETS (5)
+
+#define MEMORY_CONFIG_REVISION 3
+
+///
+/// SMRAM Memory Range
+///
+#define PEI_MR_SMRAM_ABSEG_MASK 0x01
+#define PEI_MR_SMRAM_HSEG_MASK 0x02
+
+///
+/// SA SPD profile selections.
+///
+typedef enum {
+ Default, ///< 0, Default SPD
+ UserDefined, ///< 1, User Defined profile
+ XMPProfile1, ///< 2, XMP Profile 1
+ XMPProfile2, ///< 3, XMP Profile 2
+ XMPProfileMax = 0xFF ///< Ensures SA_SPD is UINT8
+} SA_SPD;
+
+///
+/// Define the boot modes used by the SPD read function.
+///
+typedef enum {
+ SpdCold, ///< Cold boot
+ SpdWarm, ///< Warm boot
+ SpdS3, ///< S3 resume
+ SpdFast, ///< Fast boot
+ SpdBootModeMax ///< Delimiter
+} SPD_BOOT_MODE;
+
+typedef struct {
+ UINT8 SpdData[SA_MC_MAX_CHANNELS][SA_MC_MAX_SLOTS][SA_MC_MAX_SPD_SIZE];
+//Next Field Offset 2048
+} SPD_DATA_BUFFER;
+
+typedef struct {
+ UINT8 DqByteMap[SA_MC_MAX_CHANNELS][SA_MRC_ITERATION_MAX][2];
+//Next Field Offset 24
+} SA_MEMORY_DQ_MAPPING;
+
+typedef struct {
+ UINT8 DqsMapCpu2Dram[SA_MC_MAX_CHANNELS][SA_MC_MAX_BYTES_NO_ECC];
+//Next Field Offset 16
+} SA_MEMORY_DQS_MAPPING;
+
+typedef struct {
+ UINT16 RcompResistor[SA_MRC_MAX_RCOMP]; ///< Offset 0: Reference RCOMP resistors on motherboard
+ UINT16 RcompTarget[SA_MRC_MAX_RCOMP_TARGETS]; ///< Offset 6: RCOMP target values for DqOdt, DqDrv, CmdDrv, CtlDrv, ClkDrv
+//Next Field Offset 16
+} SA_MEMORY_RCOMP;
+
+typedef struct {
+ UINT16 Start; ///< Offset 0
+ UINT16 End; ///< Offset 2
+ UINT8 BootMode; ///< Offset 4
+ UINT8 Reserved3[3]; ///< Offset 5 Reserved for future use
+} SPD_OFFSET_TABLE;
+
+///
+/// SA memory address decode.
+///
+typedef struct
+{
+ UINT8 Controller; ///< Offset 0 Zero based Controller number
+ UINT8 Channel; ///< Offset 1 Zero based Channel number
+ UINT8 Dimm; ///< Offset 2 Zero based DIMM number
+ UINT8 Rank; ///< Offset 3 Zero based Rank number
+ UINT8 BankGroup; ///< Offset 4 Zero based Bank Group number
+ UINT8 Bank; ///< Offset 5 Zero based Bank number
+ UINT16 Cas; ///< Offset 6 Zero based CAS number
+ UINT32 Ras; ///< Offset 8 Zero based RAS number
+} SA_ADDRESS_DECODE;
+
+typedef UINT8 (EFIAPI * SA_IO_READ_8) (UINTN IoAddress);
+typedef UINT16 (EFIAPI * SA_IO_READ_16) (UINTN IoAddress);
+typedef UINT32 (EFIAPI * SA_IO_READ_32) (UINTN IoAddress);
+typedef UINT8 (EFIAPI * SA_IO_WRITE_8) (UINTN IoAddress, UINT8 Value);
+typedef UINT16 (EFIAPI * SA_IO_WRITE_16) (UINTN IoAddress, UINT16 Value);
+typedef UINT32 (EFIAPI * SA_IO_WRITE_32) (UINTN IoAddress, UINT32 Value);
+typedef UINT8 (EFIAPI * SA_MMIO_READ_8) (UINTN Address);
+typedef UINT16 (EFIAPI * SA_MMIO_READ_16) (UINTN Address);
+typedef UINT32 (EFIAPI * SA_MMIO_READ_32) (UINTN Address);
+typedef UINT64 (EFIAPI * SA_MMIO_READ_64) (UINTN Address);
+typedef UINT8 (EFIAPI * SA_MMIO_WRITE_8) (UINTN Address, UINT8 Value);
+typedef UINT16 (EFIAPI * SA_MMIO_WRITE_16) (UINTN Address, UINT16 Value);
+typedef UINT32 (EFIAPI * SA_MMIO_WRITE_32) (UINTN Address, UINT32 Value);
+typedef UINT64 (EFIAPI * SA_MMIO_WRITE_64) (UINTN Address, UINT64 Value);
+typedef UINT8 (EFIAPI * SA_SMBUS_READ_8) (UINTN Address, RETURN_STATUS *Status);
+typedef UINT16 (EFIAPI * SA_SMBUS_READ_16) (UINTN Address, RETURN_STATUS *Status);
+typedef UINT8 (EFIAPI * SA_SMBUS_WRITE_8) (UINTN Address, UINT8 Value, RETURN_STATUS *Status);
+typedef UINT16 (EFIAPI * SA_SMBUS_WRITE_16) (UINTN Address, UINT16 Value, RETURN_STATUS *Status);
+typedef UINT32 (EFIAPI * SA_GET_PCI_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset);
+typedef UINT32 (EFIAPI * SA_GET_PCIE_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset);
+typedef VOID (EFIAPI * SA_GET_RTC_TIME) (UINT8 *Second, UINT8 *Minute, UINT8 *Hour, UINT8 *Day, UINT8 *Month, UINT16 *Year);
+typedef UINT64 (EFIAPI * SA_GET_CPU_TIME) (VOID *GlobalData);
+typedef VOID * (EFIAPI * SA_MEMORY_COPY) (VOID *Destination, CONST VOID *Source, UINTN NumBytes);
+typedef VOID * (EFIAPI * SA_MEMORY_SET_BYTE) (VOID *Buffer, UINTN NumBytes, UINT8 Value);
+typedef VOID * (EFIAPI * SA_MEMORY_SET_WORD) (VOID *Buffer, UINTN NumWords, UINT16 Value);
+typedef VOID * (EFIAPI * SA_MEMORY_SET_DWORD) (VOID *Buffer, UINTN NumDwords, UINT32 Value);
+typedef UINT64 (EFIAPI * SA_LEFT_SHIFT_64) (UINT64 Data, UINTN NumBits);
+typedef UINT64 (EFIAPI * SA_RIGHT_SHIFT_64) (UINT64 Data, UINTN NumBits);
+typedef UINT64 (EFIAPI * SA_MULT_U64_U32) (UINT64 Multiplicand, UINT32 Multiplier);
+typedef UINT64 (EFIAPI * SA_DIV_U64_U64) (UINT64 Dividend, UINT64 Divisor, UINT64 *Remainder);
+typedef BOOLEAN (EFIAPI * SA_GET_SPD_DATA) (SPD_BOOT_MODE BootMode, UINT8 SpdAddress, UINT8 *Buffer, UINT8 *Ddr3Table, UINT32 Ddr3TableSize, UINT8 *Ddr4Table, UINT32 Ddr4TableSize, UINT8 *LpddrTable, UINT32 LpddrTableSize);
+typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_DECODE) (UINT64 Address, SA_ADDRESS_DECODE *DramAddress);
+typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_ENCODE) (SA_ADDRESS_DECODE *DramAddress, UINT64 Address);
+typedef BOOLEAN (EFIAPI * SA_GET_RANDOM_NUMBER) (UINT32 *Rand);
+typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_READ) (UINT32 Type, UINT32 Command, UINT32 *Value, UINT32 *Status);
+typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_WRITE) (UINT32 Type, UINT32 Command, UINT32 Value, UINT32 *Status);
+typedef UINT32 (EFIAPI * SA_GET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd);
+typedef UINT32 (EFIAPI * SA_SET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd, UINT32 Value);
+typedef UINT32 (EFIAPI * SA_CHECKPOINT) (VOID *GlobalData, UINT32 CheckPoint, VOID *Scratch);
+typedef VOID (EFIAPI * SA_DEBUG_HOOK) (VOID *GlobalData, UINT16 DisplayDebugNumber);
+typedef UINT8 (EFIAPI * SA_CHANNEL_EXIST) (VOID *Outputs, UINT8 Channel);
+typedef INT32 (EFIAPI * SA_PRINTF) (VOID *Debug, UINT32 Level, char *Format, ...);
+typedef VOID (EFIAPI * SA_DEBUG_PRINT) (VOID *String);
+typedef UINT32 (EFIAPI * SA_CHANGE_MARGIN) (VOID *GlobalData, UINT8 Param, INT32 Value0, INT32 Value1, UINT8 EnMultiCast, UINT8 Channel, UINT8 RankIn, UINT8 Byte, UINT8 BitIn, UINT8 UpdateMrcData, UINT8 SkipWait, UINT32 RegFileParam);
+typedef UINT8 (EFIAPI * SA_SIGN_EXTEND) (UINT8 Value, UINT8 OldMsb, UINT8 NewMsb);
+typedef VOID (EFIAPI * SA_SHIFT_PI_COMMAND_TRAIN) (VOID *GlobalData, UINT8 Channel, UINT8 Iteration, UINT8 RankMask, UINT8 GroupMask, INT32 NewValue, UINT8 UpdateHost);
+typedef VOID (EFIAPI * SA_UPDATE_VREF) (VOID *GlobalData, UINT8 Channel, UINT8 RankMask, UINT16 DeviceMask, UINT8 VrefType, INT32 Offset, BOOLEAN UpdateMrcData, BOOLEAN PDAmode, BOOLEAN SkipWait);
+typedef UINT8 (EFIAPI * SA_GET_RTC_CMOS) (UINT8 Location);
+typedef UINT64 (EFIAPI * SA_MSR_READ_64) (UINT32 Location);
+typedef UINT64 (EFIAPI * SA_MSR_WRITE_64) (UINT32 Location, UINT64 Data);
+typedef UINT32 (EFIAPI * SA_THERMAL_OVERRIDES) (VOID *GlobalData);
+typedef VOID (EFIAPI * SA_MRC_RETURN_FROM_SMC) (VOID *GlobalData, UINT32 MrcStatus);
+typedef VOID (EFIAPI * SA_MRC_DRAM_RESET) (UINT32 PciEBaseAddress, UINT32 ResetValue);
+typedef VOID (EFIAPI * SA_SET_LOCK_PRMRR) (UINT32 PrmrrBaseAddress, UINT32 PrmrrSize);
+
+
+///
+/// Function calls into the SA.
+///
+typedef struct {
+ SA_IO_READ_8 IoRead8; ///< Offset 0: - CPU I/O port 8-bit read.
+ SA_IO_READ_16 IoRead16; ///< Offset 4: - CPU I/O port 16-bit read.
+ SA_IO_READ_32 IoRead32; ///< Offset 8: - CPU I/O port 32-bit read.
+ SA_IO_WRITE_8 IoWrite8; ///< Offset 12: - CPU I/O port 8-bit write.
+ SA_IO_WRITE_16 IoWrite16; ///< Offset 16: - CPU I/O port 16-bit write.
+ SA_IO_WRITE_32 IoWrite32; ///< Offset 20: - CPU I/O port 32-bit write.
+ SA_MMIO_READ_8 MmioRead8; ///< Offset 24: - Memory Mapped I/O port 8-bit read.
+ SA_MMIO_READ_16 MmioRead16; ///< Offset 28: - Memory Mapped I/O port 16-bit read.
+ SA_MMIO_READ_32 MmioRead32; ///< Offset 32: - Memory Mapped I/O port 32-bit read.
+ SA_MMIO_READ_64 MmioRead64; ///< Offset 36: - Memory Mapped I/O port 64-bit read.
+ SA_MMIO_WRITE_8 MmioWrite8; ///< Offset 40: - Memory Mapped I/O port 8-bit write.
+ SA_MMIO_WRITE_16 MmioWrite16; ///< Offset 44: - Memory Mapped I/O port 16-bit write.
+ SA_MMIO_WRITE_32 MmioWrite32; ///< Offset 48: - Memory Mapped I/O port 32-bit write.
+ SA_MMIO_WRITE_64 MmioWrite64; ///< Offset 52: - Memory Mapped I/O port 64-bit write.
+ SA_SMBUS_READ_8 SmbusRead8; ///< Offset 56: - Smbus 8-bit read.
+ SA_SMBUS_READ_16 SmbusRead16; ///< Offset 60: - Smbus 16-bit read.
+ SA_SMBUS_WRITE_8 SmbusWrite8; ///< Offset 64: - Smbus 8-bit write.
+ SA_SMBUS_WRITE_16 SmbusWrite16; ///< Offset 68: - Smbus 16-bit write.
+ SA_GET_PCI_DEVICE_ADDRESS GetPciDeviceAddress; ///< Offset 72: - Get PCI device address.
+ SA_GET_PCIE_DEVICE_ADDRESS GetPcieDeviceAddress; ///< Offset 76: - Get PCI express device address.
+ SA_GET_RTC_TIME GetRtcTime; ///< Offset 80: - Get the current time value.
+ SA_GET_CPU_TIME GetCpuTime; ///< Offset 84: - The current CPU time in milliseconds.
+ SA_MEMORY_COPY CopyMem; ///< Offset 88: - Perform byte copy operation.
+ SA_MEMORY_SET_BYTE SetMem; ///< Offset 92: - Perform byte initialization operation.
+ SA_MEMORY_SET_WORD SetMemWord; ///< Offset 96: - Perform word initialization operation.
+ SA_MEMORY_SET_DWORD SetMemDword; ///< Offset 100: - Perform dword initialization operation.
+ SA_LEFT_SHIFT_64 LeftShift64; ///< Offset 104: - Left shift the 64-bit data value by specified number of bits.
+ SA_RIGHT_SHIFT_64 RightShift64; ///< Offset 108: - Right shift the 64-bit data value by specified number of bits.
+ SA_MULT_U64_U32 MultU64x32; ///< Offset 112: - Multiply a 64-bit data value by a 32-bit data value.
+ SA_DIV_U64_U64 DivU64x64; ///< Offset 116: - Divide a 64-bit data value by a 64-bit data value.
+ SA_GET_SPD_DATA GetSpdData; ///< Offset 120: - Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure.
+ SA_GET_RANDOM_NUMBER GetRandomNumber; ///< Offset 124: - Get the next random 32-bit number.
+ SA_CPU_MAILBOX_READ CpuMailboxRead; ///< Offset 128: - Perform a CPU mailbox read.
+ SA_CPU_MAILBOX_WRITE CpuMailboxWrite; ///< Offset 132: - Perform a CPU mailbox write.
+ SA_GET_MEMORY_VDD GetMemoryVdd; ///< Offset 136: - Get the current memory voltage (VDD).
+ SA_SET_MEMORY_VDD SetMemoryVdd; ///< Offset 140: - Set the memory voltage (VDD) to the given value.
+ SA_CHECKPOINT CheckPoint; ///< Offset 144: - Check point that is called at various points in the MRC.
+ SA_DEBUG_HOOK DebugHook; ///< Offset 148: - Typically used to display to the I/O port 80h.
+ SA_DEBUG_PRINT DebugPrint; ///< Offset 152: - Output a string to the debug stream/device.
+ SA_GET_RTC_CMOS GetRtcCmos; ///< Offset 156: - Get the current value of the specified RTC CMOS location.
+ SA_MSR_READ_64 ReadMsr64; ///< Offset 160: - Get the current value of the specified MSR location.
+ SA_MSR_WRITE_64 WriteMsr64; ///< Offset 164 - Set the current value of the specified MSR location.
+ SA_MRC_RETURN_FROM_SMC MrcReturnFromSmc; ///< Offset 168 - Hook function after returning from MrcStartMemoryConfiguration()
+ SA_MRC_DRAM_RESET MrcDramReset; ///< Offset 172 - Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset.
+} SA_FUNCTION_CALLS;
+
+///
+/// Function calls into the MRC.
+///
+typedef struct {
+ SA_CHANNEL_EXIST MrcChannelExist; ///< Offset 0: - Returns whether Channel is or is not present.
+ SA_PRINTF MrcPrintf; ///< Offset 4: - Print to output stream/device.
+ SA_CHANGE_MARGIN MrcChangeMargin; ///< Offset 8: - Change the margin.
+ SA_SIGN_EXTEND MrcSignExtend; ///< Offset 12: - Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7).
+ SA_SHIFT_PI_COMMAND_TRAIN ShiftPiCommandTrain; ///< Offset 16: - Move CMD/CTL/CLK/CKE PIs during training.
+ SA_UPDATE_VREF MrcUpdateVref; ///< Offset 20: - Update the Vref value and wait until it is stable.
+} SA_MEMORY_FUNCTIONS;
+
+/**
+ Memory Configuration
+ The contents of this structure are CRC'd by the MRC for option change detection.
+ This structure is copied en mass to the MrcInput structure. If you add fields here, you must update the MrcInput structure.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Removed GearType.
+ - Added Lp4DqsOscEn, RMTLoopCount, EnBER, DualDimmPerChannelBoardType.
+ <b>Revision 3</b>:
+ - Removed EvLoader, EvLoaderDelay.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT16 Size; ///< Offset 28 The size of this structure, in bytes. Must be the first entry in this structure.
+ UINT8 HobBufferSize; ///< Offset 30 Size of HOB buffer for MRC
+
+ UINT8 SpdProfileSelected; ///< Offset 31 SPD XMP profile selection - for XMP supported DIMM: <b>0=Default DIMM profile</b>, 1=Customized profile, 2=XMP profile 1, 3=XMP profile 2.
+
+ // The following parameters are used only when SpdProfileSelected is UserDefined (CUSTOM PROFILE)
+ UINT16 tCL; ///< Offset 32 User defined Memory Timing tCL value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 31=Maximum.
+ UINT16 tRCDtRP; ///< Offset 34 User defined Memory Timing tRCD value (same as tRP), valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 63=Maximum
+ UINT16 tRAS; ///< Offset 36 User defined Memory Timing tRAS value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 64=Maximum.
+ UINT16 tWR; ///< Offset 38 User defined Memory Timing tWR value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 24.
+ UINT16 tRFC; ///< Offset 40 User defined Memory Timing tRFC value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 1023=Maximum.
+ UINT16 tRRD; ///< Offset 42 User defined Memory Timing tRRD value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum.
+ UINT16 tWTR; ///< Offset 44 User defined Memory Timing tWTR value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRTP; ///< Offset 46 User defined Memory Timing tRTP value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum. DDR4 legal values: 5, 6, 7, 8, 9, 10, 12
+ UINT16 tFAW; ///< Offset 48 User defined Memory Timing tFAW value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 63=Maximum.
+ UINT16 tCWL; ///< Offset 50 User defined Memory Timing tCWL value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 20=Maximum.
+ UINT16 tREFI; ///< Offset 52 User defined Memory Timing tREFI value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 65535=Maximum.
+ UINT16 PciIndex; ///< Offset 54 Pci index register address: <b>0xCF8=Default</b>
+ UINT16 PciData; ///< Offset 56 Pci data register address: <b>0xCFC=Default</b>
+ UINT16 VddVoltage; ///< Offset 58 DRAM voltage (Vdd) in millivolts: <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
+ UINT16 Idd3n; ///< Offset 60 EPG Active standby current (Idd3N) in milliamps from DIMM datasheet.
+ UINT16 Idd3p; ///< Offset 62 EPG Active power-down current (Idd3P) in milliamps from DIMM datasheet.
+
+ UINT32 EccSupport:1; ///< Offset 64 DIMM Ecc Support option - for Desktop only: 0=Disable, <b>1=Enable</b>
+ UINT32 MrcSafeConfig:1; ///< - MRC Safe Mode: <b>0=Disable</b>, 1=Enable
+ UINT32 RemapEnable:1; ///< - This option is used to control whether to enable/disable memory remap above 4GB: 0=Disable, <b>1=Enable</b>.
+ UINT32 ScramblerSupport:1; ///< - Memory scrambler support: 0=Disable, <b>1=Enable</b>
+ UINT32 Vc1ReadMeter:1; ///< - VC1 Read Metering Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 DdrThermalSensor:1; ///< - Ddr Thermal Sensor: 0=Disable, <b>1=Enable</b>
+ UINT32 LpddrMemWriteLatencySet:1; ///< - LPDDR3 Write Latency Set option: 0=Set A, <b>1=Set B</b>
+ UINT32 Off64Bits7to8Rsvd:2; ///< - Bit 7-8 Reserved
+ UINT32 SimicsFlag:1; ///< - Option to Enable SIMICS: 0=Disable, <b>1=Enable</b>
+ UINT32 Ddr4DdpSharedClock:1; ///< - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP package. <b>0=Not shared</b>, 1=Shared
+ UINT32 SharedZqPin:1; ///< - Select if ZQ pin is shared between Rank ranks. For CFL, this option only works for DDR4. the option works for LPDDR4 and DDR4. <b>0=Not shared</b>, 1=Shared
+ // Thermal Management
+ UINT32 ThermalManagement:1; ///< - <CFL> Memory Thermal Management Support: <b>0=Disable</b>, 1=Enable.
+ UINT32 PeciInjectedTemp:1; ///< - <CFL> Enable/Disable memory temperatures to be injected to the processor via PECI: <b>0=Disable</b>, 1=Enable.
+ UINT32 ExttsViaTsOnBoard:1; ///< - <CFL> Enable/Disable routing TS-on-Board's ALERT# and THERM# to EXTTS# pins on the PCH: <b>0=Disable</b>, 1=Enable.
+ UINT32 ExttsViaTsOnDimm:1; ///< - <CFL> Enable/Disable routing TS-on-DIMM's ALERT# to EXTTS# pin on the PCH: <b>0=Disable</b>, 1=Enable.
+ UINT32 VirtualTempSensor:1; ///< - <CFL> Enable/Disable Virtual Temperature Sensor (VTS): <b>0=Disable</b>, 1=Enable.
+ UINT32 Lp4DqsOscEn :1; ///< - <CNL> LpDdrDqDqsReTraining - DqDqsReTraining Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 DualDimmPerChannelBoardType:1; ///< - <CFL> DualDimmPerChannelBoardType - Option to indicate if the Memory Design for the board includes two DIMMs per channel: <b>0=Single DIMM Design</b>, 1=Dual DIMM Design
+ UINT32 ReservedBits1:13;
+ /**
+ Disables a DIMM slot in the channel even if a DIMM is present\n
+ Array index represents the channel number (0 = channel 0, 1 = channel 1)\n
+ <b>0x0 = DIMM 0 and DIMM 1 enabled</b>\n
+ 0x1 = DIMM 0 disabled, DIMM 1 enabled\n
+ 0x2 = DIMM 0 enabled, DIMM 1 disabled\n
+ 0x3 = DIMM 0 and DIMM 1 disabled (will disable the whole channel)\n
+ **/
+ UINT8 DisableDimmChannel[SA_MC_MAX_CHANNELS]; ///< Offset 68
+ /**
+ Selects the ratio to multiply the reference clock by for the DDR frequency\n
+ When RefClk is 133MHz\n
+ <b>0x00 = Auto</b>, 0x03 through 0x0C are valid values, all others are invalid\n
+ When RefClk is 100MHz\n
+ <b>0x00 = Auto</b>, 0x06 through 0x10 are valid values, all others are invalid\n
+ **/
+ UINT8 Ratio; ///< Offset 70
+ UINT8 ProbelessTrace; ///< Offset 71 Probeless Trace: <b>0=Disabled</b>, <b>1=Enabled</b>
+ UINT32 BClkFrequency; ///< Offset 72 Base reference clock value, in Hertz: <b>100000000 = 100Hz</b>, 125000000=125Hz, 167000000=167Hz, 250000000=250Hz
+ /**
+ - Channel Hash Enable.\n
+ NOTE: BIT7 will interleave the channels at a 2 cache-line granularity, BIT8 at 4 and BIT9 at 8\n
+ 0=BIT6, <B>1=BIT7</B>, 2=BIT8, 3=BIT9
+ **/
+ UINT8 ChHashInterleaveBit; ///< Offset 76 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9 (Valid values for BDW are 0-7 for BITS 6 - 13)
+ UINT8 EnergyScaleFact; ///< Offset 77 Energy Scale Factor. 0=Minimal, 7=Maximum, <b>4=Default</b>
+ BOOLEAN PerBankRefresh; ///< <CNL> Offset 78 Enables and Disables the per bank refresh. This only impacts memory technologies that support PBR: LPDDR3, LPDDR4. FALSE=Disabled, <b>TRUE=Enabled</b>
+ UINT8 McLock; ///< <CFL> Offset 79 Enable/Disable memory configuration register locking: 0=Disable, <b>1=Enable</b>.
+ // Training Algorithms 1
+ UINT32 ECT:1; ///< Offset 80 Enable/Disable Early Command Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 SOT:1; ///< - Enable/Disable Sense Amp Offset Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 ERDMPRTC2D:1; ///< - Enable/Disable Early ReadMPR Timing Centering 2D. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDMPRT:1; ///< - Enable/Disable Read MPR Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RCVET:1; ///< - Enable/Disable Receive Enable Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 JWRL:1; ///< - Enable/Disable JEDEC Write Leveling Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 EWRTC2D:1; ///< - Enable/Disable Early Write Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 ERDTC2D:1; ///< - Enable/Disable Early Read Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRTC1D:1; ///< - Enable/Disable 1D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRVC1D:1; ///< - Enable/Disable 1D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDTC1D:1; ///< - Enable/Disable 1D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 DIMMODTT:1; ///< - Enable/Disable DIMM ODT Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 DIMMRONT:1; ///< - Enable/Disable DIMM RON training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRDSEQT:1; ///< - Enable/Disable Write Drive Strength / Equalization Training 2D. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 WRSRT:1; ///< - Enable/Disable Write Slew Rate traning. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable.</b>
+ UINT32 RDODTT:1; ///< - Enable/Disable Read ODT Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RDEQT:1; ///< - Enable/Disable Read Equalization Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RDAPT:1; ///< - Enable/Disable Read Amplifier Power Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 WRTC2D:1; ///< - Enable/Disable 2D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDTC2D:1; ///< - Enable/Disable 2D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRVC2D:1; ///< - Enable/Disable 2D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDVC2D:1; ///< - Enable/Disable 2D Read Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 CMDVC:1; ///< - Enable/Disable Command Vref Centering Training. Note it is not recommended to change this setting from the default value 0=Disable, <b>1=Enable</b>.
+ UINT32 LCT:1; ///< - Enable/Disable Late Command Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RTL:1; ///< - Enable/Disable Round Trip Latency function. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 TAT:1; ///< - Enable/Disable Turn Around Time function. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RMT:1; ///< - Enable/Disable Rank Margin Tool function: <b>0=Disable</b>, 1=Enable.
+ UINT32 MEMTST:1; ///< - Enable/Disable Memory Test function: <b>0=Disable</b>, 1=Enable.
+ UINT32 ALIASCHK:1; ///< - Enable/Disable DIMM SPD Alias Check: 0=Disable, <b>1=Enable</b>
+ UINT32 RCVENC1D:1; ///< - Enable/Disable Receive Enable Centering Training (LPDDR Only). Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ UINT32 RMC:1; ///< - Enable/Disable Retrain Margin Check. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ UINT32 WRDSUDT:1; ///< - Enable/Disable Write Drive Strength Up/Dn independently. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ // Training Algorithms 2
+ UINT32 CMDSR : 1; ///< <CFL> Offset 84 - Enable/Disable CMD Slew Rate Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 CMDDSEQ : 1; ///< <CFL> - Enable/Disable CMD Drive Strength and Tx Equalization: 0=Disable, <b>1=Enable</b>.
+ UINT32 CMDNORM : 1; ///< <CFL> - Enable/Disable CMD Normalization: 0=Disable, <b>1=Enable</b>.
+ UINT32 EWRDSEQ : 1; ///< <CFL> - Enable/Disable Early DQ Write Drive Strength and Equalization Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDVC1D : 1; ///< <CNL> - Enable/Disable Read Voltage Centering 1D
+ UINT32 TXTCO : 1; ///< <CNL> - Enable/Disable Write TCO Comp Training
+ UINT32 CLKTCO : 1; ///< <CNL> - Enable/Disable Clock TCO Comp Training
+ UINT32 ReservedBits2 :25;
+
+ UINT32 OddRatioMode:1; ///< Offset 88 If Odd Ratio Mode is enabled, QCLK frequency has an addition of 133/100 MHz: <b>0=Disable</b>, 1=Enable
+ UINT32 MrcTimeMeasure:1; ///< - Enables serial debug level to display the MRC execution times only: <b>0=Disable</b>, 1=Enable
+ UINT32 MrcFastBoot:1; ///< - Enables the MRC fast boot path for faster cold boot execution: 0=Disable, <b>1=Enable</b>
+ UINT32 DqPinsInterleaved:1; ///< - Interleaving mode of DQ/DQS pins for HSW_ULT which depends on board routing: <b>0=Disable</b>, 1=Enable
+ UINT32 RankInterleave:1; ///< - Rank Interleave Mode: 0=Disable, <b>1=Enable</b>
+ UINT32 EnhancedInterleave:1; ///< - Enhanced Interleave Mode: 0=Disable, <b>1=Enable</b>
+ UINT32 WeaklockEn:1; ///< - Weak Lock Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 CmdTriStateDis:1; ///< - CMD Tri-State Support: <b>0=Enable</b>, 1=Disable. Note: This should be set to 1 (Disable) if Command RTT is not present on the platform.
+ UINT32 MemoryTrace:1; ///< - Memory Trace to second DDR channel using Stacked Mode: <b>0=Disable</b>, 1=Enable
+ UINT32 ChHashEnable:1; ///< - Channel Hash Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 EnableExtts:1; ///< - Enable Extts: <b>0=Disable</b>, 1=Enable
+ UINT32 EnableCltm:1; ///< - Enable Closed Loop Thermal Management: <b>0=Disable</b>, 1=Enable
+ UINT32 EnableOltm:1; ///< - Enable Open Loop Thermal Management: <b>0=Disable</b>, 1=Enable
+ UINT32 EnablePwrDn:1; ///< - Enable Power Down control for DDR: 0=PCODE control, <b>1=BIOS control</b>
+ UINT32 EnablePwrDnLpddr:1; ///< - Enable Power Down for LPDDR: 0=PCODE control, <b>1=BIOS control</b>
+ UINT32 LockPTMregs:1; ///< - Lock PCU Thermal Management registers: 0=Disable, <b>1=Enable</b>
+ UINT32 UserPowerWeightsEn:1; ///< - Allows user to explicitly set power weight, scale factor, and channel power floor values: <b>0=Disable</b>, 1=Enable
+ UINT32 RaplLim2Lock:1; ///< - Lock DDR_RAPL_LIMIT register: <b>0=Disable</b>, 1=Enable
+ UINT32 RaplLim2Ena:1; ///< - Enable Power Limit 2: <b>0=Disable</b>, 1=Enable
+ UINT32 RaplLim1Ena:1; ///< - Enable Power Limit 1: <b>0=Disable</b>, 1=Enable
+ UINT32 SrefCfgEna:1; ///< - Enable Self Refresh: 0=Disable, <b>1=Enable</b>
+ UINT32 ThrtCkeMinDefeatLpddr:1; ///< - Throttler CKE min defeature for LPDDR: 0=Disable, <b>1=Enable</b>
+ UINT32 ThrtCkeMinDefeat:1; ///< - Throttler CKE min defeature: <b>0=Disable</b>, 1=Enable
+ UINT32 AutoSelfRefreshSupport:1; ///< - FALSE = No auto self refresh support, <b>TRUE = auto self refresh support</b>
+ UINT32 ExtTemperatureSupport:1; ///< - FALSE = No extended temperature support, <b>TRUE = extended temperature support</b>
+ UINT32 MobilePlatform:1; ///< - Memory controller device id indicates: <b>TRUE if mobile</b>, FALSE if not. Note: This will be auto-detected and updated.
+ UINT32 Force1Dpc:1; ///< - TRUE means force one DIMM per channel, <b>FALSE means no limit</b>
+ UINT32 ForceSingleRank:1; ///< - TRUE means use Rank0 only (in each DIMM): <b>0=Disable</b>, 1=Enable
+ UINT32 RhPrevention:1; ///< - RH Prevention Enable/Disable: 0=Disable, <b>1=Enable</b>
+ UINT32 VttTermination:1; ///< - Vtt Termination for Data ODT: <b>0=Disable</b>, 1=Enable
+ UINT32 VttCompForVsshi:1; ///< - Enable/Disable Vtt Comparator For Vsshi: <b>0=Disable</b>, 1=Enable
+ UINT32 ExitOnFailure:1; ///< - MRC option for exit on failure or continue on failure: 0=Disable, <b>1=Enable</b>
+
+ UINT32 VddSettleWaitTime; ///< Offset 92 Amount of time in microseconds to wait for Vdd to settle on top of 200us required by JEDEC spec: <b>Default=0</b>
+ UINT16 FreqSaGvLow; ///< Offset 96 SA GV: 0 is Auto/default, otherwise holds the frequency value: <b>0=Default</b>, 1067, 1200, 1333, 1400, 1600, 1800, 1867.
+ UINT16 SrefCfgIdleTmr; ///< Offset 98 Self Refresh idle timer: <b>512=Minimal</b>, 65535=Maximum
+ UINT8 RhActProbability; ///< Offset 100 Activation probability for Hardware RHP
+ UINT8 SmramMask; ///< Offset 101 Reserved memory ranges for SMRAM
+ UINT16 Vc1ReadMeterThreshold; ///< <CFL> Offset 102 VC1 Read Meter Threshold (within Time Window): 0=Minimal, 0xFFFF=Maximum, <b>0x118=Default</b>
+ UINT32 Vc1ReadMeterTimeWindow; ///< <CFL> Offset 104 VC1 Read Meter Time Window: 0=Minimal, 0x1FFFF=Maximum, <b>0x320=Default</b>
+ UINT64 BerAddress[4]; ///< Offset 108 - 139 BER Address(es): <b>0=Minimal</b>, 0xFFFFFFFFFFFFFFFF=Maximum (step is 0x40)
+
+ UINT16 ChHashMask; ///< Offset 140 Channel Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), <b>0x30CE= BIT[19:18, 13:12 ,9:7] set</b>
+ UINT16 DdrFreqLimit; ///< Offset 142 Memory Frequency setting: 3=1067, 5=1333, 7=1600, 9=1867, 11=2133, 13=2400, <b>15=2667</b>
+ UINT8 RaplLim2WindX; ///< Offset 144 Power Limit 2 Time Window X value: 0=Minimal, 3=Maximum, <b>1=Default</b>
+ UINT8 RaplLim2WindY; ///< Offset 145 Power Limit 2 Time Window Y value: 0=Minimal, 3=Maximum, <b>1=Default</b>
+ UINT8 RaplLim1WindX; ///< Offset 146 Power Limit 1 Time Window X value: <b>0=Minimal</b>, 3=Maximum
+ UINT8 RaplLim1WindY; ///< Offset 147 Power Limit 1 Time Window Y value: <b>0=Minimal</b>, 31=Maximum
+ UINT16 RaplLim2Pwr; ///< Offset 148 Power Limit 2: 0=Minimal, 16383=Maximum, <b>222=Default</b>
+ UINT16 RaplLim1Pwr; ///< Offset 150 Power Limit 1: <b>0=Minimal</b>, 16383=Maximum
+ UINT8 WarmThresholdCh0Dimm0; ///< Offset 152 Warm Threshold (Channel 0, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmThresholdCh0Dimm1; ///< Offset 153 Warm Threshold (Channel 0, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmThresholdCh1Dimm0; ///< Offset 154 Warm Threshold (Channel 1, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmThresholdCh1Dimm1; ///< Offset 155 Warm Threshold (Channel 1, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotThresholdCh0Dimm0; ///< Offset 156 Hot Threshold (Channel 0, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotThresholdCh0Dimm1; ///< Offset 157 Hot Threshold (Channel 0, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotThresholdCh1Dimm0; ///< Offset 158 Hot Threshold (Channel 1, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotThresholdCh1Dimm1; ///< Offset 159 Hot Threshold (Channel 1, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmBudgetCh0Dimm0; ///< Offset 160 Warm Budget (Channel 0, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmBudgetCh0Dimm1; ///< Offset 161 Warm Budget (Channel 0, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmBudgetCh1Dimm0; ///< Offset 162 Warm Budget (Channel 1, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 WarmBudgetCh1Dimm1; ///< Offset 163 Warm Budget (Channel 1, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotBudgetCh0Dimm0; ///< Offset 164 Hot Budget (Channel 0, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotBudgetCh0Dimm1; ///< Offset 165 Hot Budget (Channel 0, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotBudgetCh1Dimm0; ///< Offset 166 Hot Budget (Channel 1, Dimm 0): 0=Minimal, <b>255=Maximum</b>
+ UINT8 HotBudgetCh1Dimm1; ///< Offset 167 Hot Budget (Channel 1, Dimm 1): 0=Minimal, <b>255=Maximum</b>
+ UINT8 IdleEnergyCh0Dimm0; ///< Offset 168 Idle Energy (Channel 0, Dimm 0): 0=Minimal, 63=Maximum, <b>10=Default</b>
+ UINT8 IdleEnergyCh0Dimm1; ///< Offset 169 Idle Energy (Channel 0, Dimm 1): 0=Minimal, 63=Maximum, <b>10=Default</b>
+ UINT8 IdleEnergyCh1Dimm0; ///< Offset 170 Idle Energy (Channel 1, Dimm 0): 0=Minimal, 63=Maximum, <b>10=Default</b>
+ UINT8 IdleEnergyCh1Dimm1; ///< Offset 171 Idle Energy (Channel 1, Dimm 1): 0=Minimal, 63=Maximum, <b>10=Default</b>
+ UINT8 PdEnergyCh0Dimm0; ///< Offset 172 Power Down Energy (Channel 0, Dimm 0): 0=Minimal, 63=Maximum, <b>6=Default</b>
+ UINT8 PdEnergyCh0Dimm1; ///< Offset 173 Power Down Energy (Channel 0, Dimm 1): 0=Minimal, 63=Maximum, <b>6=Default</b>
+ UINT8 PdEnergyCh1Dimm0; ///< Offset 174 Power Down Energy (Channel 1, Dimm 0): 0=Minimal, 63=Maximum, <b>6=Default</b>
+ UINT8 PdEnergyCh1Dimm1; ///< Offset 175 Power Down Energy (Channel 1, Dimm 1): 0=Minimal, 63=Maximum, <b>6=Default</b>
+ UINT8 ActEnergyCh0Dimm0; ///< Offset 176 Activation Energy (Channel 0, Dimm 0): 0=Minimal, 255=Maximum, <b>172=Default</b>
+ UINT8 ActEnergyCh0Dimm1; ///< Offset 177 Activation Energy (Channel 0, Dimm 1): 0=Minimal, 255=Maximum, <b>172=Default</b>
+ UINT8 ActEnergyCh1Dimm0; ///< Offset 178 Activation Energy (Channel 1, Dimm 0): 0=Minimal, 255=Maximum, <b>172=Default</b>
+ UINT8 ActEnergyCh1Dimm1; ///< Offset 179 Activation Energy (Channel 1, Dimm 1): 0=Minimal, 255=Maximum, <b>172=Default</b>
+ UINT8 RdEnergyCh0Dimm0; ///< Offset 180 Read Energy (Channel 0, Dimm 0): 0=Minimal, 255=Maximum, <b>212=Default</b>
+ UINT8 RdEnergyCh0Dimm1; ///< Offset 181 Read Energy (Channel 0, Dimm 1): 0=Minimal, 255=Maximum, <b>212=Default</b>
+ UINT8 RdEnergyCh1Dimm0; ///< Offset 182 Read Energy (Channel 1, Dimm 0): 0=Minimal, 255=Maximum, <b>212=Default</b>
+ UINT8 RdEnergyCh1Dimm1; ///< Offset 183 Read Energy (Channel 1, Dimm 1): 0=Minimal, 255=Maximum, <b>212=Default</b>
+ UINT8 WrEnergyCh0Dimm0; ///< Offset 184 Write Energy (Channel 0, Dimm 0): 0=Minimal, 255=Maximum, <b>221=Default</b>
+ UINT8 WrEnergyCh0Dimm1; ///< Offset 185 Write Energy (Channel 0, Dimm 1): 0=Minimal, 255=Maximum, <b>221=Default</b>
+ UINT8 WrEnergyCh1Dimm0; ///< Offset 186 Write Energy (Channel 1, Dimm 0): 0=Minimal, 255=Maximum, <b>221=Default</b>
+ UINT8 WrEnergyCh1Dimm1; ///< Offset 187 Write Energy (Channel 1, Dimm 1): 0=Minimal, 255=Maximum, <b>221=Default</b>
+
+
+ UINT8 MaxRttWr; ///< Offset 188 Maximum DIMM RTT_WR to use in power training: <b>0=ODT Off</b>, 1 = 120 ohms
+ UINT8 ThrtCkeMinTmr; ///< Offset 189 Throttler CKE min timer: 0=Minimal, 0xFF=Maximum, <b>0x30=Default</b>
+ UINT8 ThrtCkeMinTmrLpddr; ///< Offset 190 Throttler CKE min timer for LPDDR: 0=Minimal, 0xFF=Maximum, <b>0x40=Default</b>
+ UINT8 BerEnable; ///< Offset 191 BER Enable and # of Addresses passed in: <b>0=Minimal</b>, 8=Maximum
+ UINT8 CkeRankMapping; ///< Offset 192 Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies which rank CKE[i] goes to.
+ UINT8 StrongWkLeaker; ///< Offset 193 Strong Weak Leaker: 1=Minimal, <b>7=Maximum</b>
+ UINT8 CaVrefConfig; ///< Offset 194 0=VREF_CA goes to both CH_A and CH_B, 1=VREF_CA to CH_A, VREF_DQ_A to CH_B, <b>2=VREF_CA to CH_A, VREF_DQ_B to CH_B</b>
+ UINT8 SaGv; ///< Offset 195 SA GV: 0=Disabled; 1=FixedLow; CFL: 2=FixedHigh, CNL: 2=FixedMid; <b>CFL: 3=Enabled</b> CNL: 3=FixedHigh; <b>CNL: 4=Enabled</b>
+ UINT8 RaplPwrFlCh1; ///< Offset 196 Power Channel 1 Floor value: <b>0=Minimal</b>, 255=Maximum
+ UINT8 RaplPwrFlCh0; ///< Offset 197 Power Channel 0 Floor value: <b>0=Minimal</b>, 255=Maximum
+ UINT8 NModeSupport; ///< Offset 198 Memory N Mode Support - Enable user to select Auto, 1N or 2N: <b>0=AUTO</b>, 1=1N, 2=2N.
+ UINT8 RefClk; ///< Offset 199 Selects the DDR base reference clock. 0x01 = 100MHz, <b>0x00 = 133MHz</b>
+ UINT8 EnCmdRate; ///< Offset 200 CMD Rate Enable: 0=Disable, 1=1 CMD, 2=2 CMDs, <b>3=3 CMDs</b>, 4=4 CMDs, 5=5 CMDs, 6=6 CMDs, 7=7 CMDs
+ UINT8 Refresh2X; ///< Offset 201 Refresh 2x: <b>0=Disable</b>, 1=Enable for WARM or HOT, 2=Enable for HOT only
+ UINT8 EpgEnable; ///< Offset 202 Enable Energy Performance Gain.
+ UINT8 RhSolution; ///< Offset 203 Type of solution to be used for RHP - 0/1 = HardwareRhp/Refresh2x
+ UINT8 UserThresholdEnable; ///< Offset 204 Flag to manually select the DIMM CLTM Thermal Threshold, 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 UserBudgetEnable; ///< Offset 205 Flag to manually select the Budget Registers for CLTM Memory Dimms , 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 TsodTcritMax; ///< Offset 206 TSOD Tcrit Maximum Value to be Configure , 0=Minimal, 128=Maximum, , <b>105=Default</b>
+
+ UINT8 TsodEventMode; ///< Offset 207 Flag to Enable Event Mode Interruption in TSOD Configuration Register, 0=Disable, 1=Enable, <b>1=Default</b>
+ UINT8 TsodEventPolarity; ///< Offset 208 Event Signal Polarity in TSOD Configuration Register, 0=Low, 1=High, <b>0=Default</b>
+ UINT8 TsodCriticalEventOnly; ///< Offset 209 Critical Trigger Only in TSOD Configuration Register,0=Disable, 1=Enable, <b>1=Default</b>
+ UINT8 TsodEventOutputControl; ///< Offset 210 Event Output Control in TSOD Configuration Register,0=Disable, 1=Enable, <b>1=Default</b>
+ UINT8 TsodAlarmwindowLockBit; ///< Offset 211 Alarm Windows Lock Bit in TSOD Configuration Register,0=Unlock, 1=Lock, <b>0=Default</b>
+ UINT8 TsodCriticaltripLockBit;///< Offset 212 Critical Trip Lock Bit in TSOD Configuration Register,0=Unlock, 1=Lock, <b>0=Default</b>
+ UINT8 TsodShutdownMode; ///< Offset 213 Shutdown Mode TSOD Configuration Register,0=Enable, 1=Disable, <b>0=Default</b>
+ UINT8 TsodThigMax; ///< Offset 214 Thigh Max Value In the for CLTM Memory Dimms , 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 TsodManualEnable; ///< Offset 215 Flag to manually select the TSOD Register Values , 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 DllBwEn0; ///< Offset 216 DllBwEn value for 1067
+ UINT8 DllBwEn1; ///< Offset 217 DllBwEn value for 1333
+ UINT8 DllBwEn2; ///< Offset 218 DllBwEn value for 1600
+ UINT8 DllBwEn3; ///< Offset 219 DllBwEn value for 1867 and up
+ UINT8 RetrainOnFastFail; ///< Offset 220 Restart MRC in Cold mode if SW MemTest fails during Fast flow. 0 = Disabled, <b>1 = Enabled</b>
+ UINT8 ForceOltmOrRefresh2x; ///< Offset 221 Force OLTM or 2X Refresh when needed. <b>0 = Force OLTM</b>, 1 = Force 2x Refresh
+ UINT8 PowerDownMode; ///< Offset 222 CKE Power Down Mode: <b>0xFF=AUTO</b>, 0=No Power Down, 1= APD mode, 6=PPD-DLL Off mode
+ UINT8 PwdwnIdleCounter; ///< Offset 223 CKE Power Down Mode Idle Counter: 0=Minimal, 255=Maximum, <b>0x80=0x80 DCLK</b>
+ UINT8 IsvtIoPort; ///< Offset 224 ISVT IO Port Address: 0=Minimal, 0xFF=Maximum, <b>0x99=Default</b>
+ UINT8 CmdRanksTerminated; ///< <CNL> Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, Rank0 is terminating and Rank1 is non-terminating</b>
+ UINT8 GdxcEnable; ///< <CFL> Offset 226 GDXC MOT enable
+ UINT8 GdxcIotSize; ///< <CFL> Offset 227 IOT size in multiples of 8MEG
+ UINT8 GdxcMotSize; ///< <CFL> Offset 228 MOT size in multiples of 8MEG
+ UINT8 RMTLoopCount; ///< Offset 229 Indicates the Loop Count to be used for Rank Margin Tool Testing: 1=Minimal, 32=Maximum, 0=AUTO, <b>0=Default</b>
+ UINT16 FreqSaGvMid; ///< Offset 230 SA GV: 0 is Auto/default, otherwise holds the frequency value expressed as an integer: <b>0=Default</b>, 1600, 1800, 1867, 2000, 2133, etc.
+
+ UINT32 RmtPerTask:1; ///< Offset 232 Bit 0: Rank Margin Tool Per Task. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 TrainTrace:1; ///< Offset 232 Bit 1: Trained state tracing debug. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 SafeMode:1; ///< Offset 232 Bit 2: Define if safe mode is enabled for MC/IO
+ UINT32 EnBER:1; ///< Offset 232 Bit 3: Define if EnBER is enabled for Rank Margin Tool
+ UINT32 Ddr4MixedUDimm2DpcLimit:1; ///< Offset 232 Bit 4: Enable/Disable 2667 Frequency Limitation for DDR4 U-DIMM Mixed Dimm 2DPC population. 0 = Disabled, <b>1 = Enabled</b>
+ UINT32 FastBootRmt:1; ///< Offset 232 Bit 5: Enable/Disable RMT on FastBoot. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 MrcTrainOnWarm:1; ///< Offset 232 Bit 6: Force MRC training on warm boot : <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 LongFlyByModeEnabled:1; ///< Offset 232 Bit 7: Long FlyBy Mode Enabled : <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 Off232RsvdBits:24; ///< Offset 232 Bit 8-31: Reserved
+
+ // TurnAround Timing
+ UINT8 tRd2RdSG; ///< Offset 236 - Read-to-Read Same Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tRd2RdDG; ///< Offset 237 - Read-to-Read Different Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum. Same Group and Different Group Timings must be the same for Non-DDR4 memory.
+ UINT8 tRd2RdDR; ///< Offset 238 - Read-to-Read Different Rank Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tRd2RdDD; ///< Offset 239 - Read-to-Read Different DIMM Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tRd2WrSG; ///< Offset 240 - Read-to-Write Same Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tRd2WrDG; ///< Offset 241 - Read-to-Write Different Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum. Same Group and Different Group Timings must be the same for Non-DDR4 memory.
+ UINT8 tRd2WrDR; ///< Offset 242 - Read-to-Write Different Rank Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tRd2WrDD; ///< Offset 243 - Read-to-Write Different DIMM Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tWr2RdSG; ///< Offset 244 - Write-to-Read Same Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 86=Maximum.
+ UINT8 tWr2RdDG; ///< Offset 245 - Write-to-Read Different Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum. Same Group and Different Group Timings must be the same for Non-DDR4 memory.
+ UINT8 tWr2RdDR; ///< Offset 246 - Write-to-Read Different Rank Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tWr2RdDD; ///< Offset 247 - Write-to-Read Different DIMM Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tWr2WrSG; ///< Offset 248 - Write-to-Write Same Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tWr2WrDG; ///< Offset 249 - Write-to-Write Different Group Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum. Same Group and Different Group Timings must be the same for Non-DDR4 memory.
+ UINT8 tWr2WrDR; ///< Offset 250 - Write-to-Write Different Rank Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT8 tWr2WrDD; ///< Offset 251 - Write-to-Write Different DIMM Turn Around Timing: <b>0=AUTO</b>, 4=Minimal, 64=Maximum.
+ UINT16 tRRD_L; ///< <CFL> Offset 252 - User defined DDR4 Memory Timing tRRD_L value, valid when MemoryProfile is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum.
+ UINT16 tRRD_S; ///< <CFL> Offset 254 - User defined DDR4 Memory Timing tRRD_S value, valid when MemoryProfile is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum.
+ UINT16 tWTR_L; ///< <CFL> Offset 266 - User defined DDR4 Memory Timing tWTR_L value, valid when MemoryProfile is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tWTR_S; ///< <CFL> Offset 268 - User defined DDR4 Memory Timing tWTR_S value, valid when MemoryProfile is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+
+} MEMORY_CONFIGURATION;
+
+/// Memory Configuration
+/// The contents of this structure are not CRC'd by the MRC for option change detection.
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-23 Config Block Header
+ SA_FUNCTION_CALLS SaCall; ///< Offset 24 Function calls into the SA.
+ SA_MEMORY_FUNCTIONS MrcCall; ///< Offset 200 Function calls into the MRC.
+ SPD_DATA_BUFFER *SpdData; ///< Offset 236 Memory SPD data, will be used by the MRC when SPD SmBus address is zero.
+ SA_MEMORY_DQ_MAPPING *DqByteMap; ///< Offset 240 LPDDR3 DQ byte mapping to CMD/CTL/CLK, from the CPU side.
+ SA_MEMORY_DQS_MAPPING *DqsMap; ///< Offset 244 LPDDR3 DQS byte swizzling between CPU and DRAM.
+ SA_MEMORY_RCOMP *RcompData; ///< Offset 248 DDR RCOMP resistors and target values.
+ UINT64 PlatformMemorySize; ///< Offset 252 The minimum platform memory size required to pass control into DXE
+ UINT32 CleanMemory:1; ///< Offset 260 Ask MRC to clear memory content: <b>FALSE=Do not Clear Memory</b>; TRUE=Clear Memory
+ UINT32 MemTestOnWarmBoot:1; ///< Offset 260 Run Base Memory Test On WarmBoot: 0=Disabled, <b>1=Enabled</b>
+ UINT32 ReservedBits5:30;
+ /**
+ Sets the serial debug message level\n
+ 0x00 = Disabled\n
+ 0x01 = Errors only\n
+ 0x02 = Errors and Warnings\n
+ <b>0x03 = Errors, Warnings, and Info</b>\n
+ 0x04 = Errors, Warnings, Info, and Events\n
+ 0x05 = Displays Memory Init Execution Time Summary only\n
+ **/
+ UINT8 SerialDebugLevel; ///< Offset 264
+ UINT8 Reserved11[3]; ///< Offset 265 Reserved
+} MEMORY_CONFIG_NO_CRC;
+#pragma pack(pop)
+
+#endif // _MEMORY_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryDxeConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryDxeConfig.h
new file mode 100644
index 0000000000..9f01c172f2
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MemoryDxeConfig.h
@@ -0,0 +1,61 @@
+/** @file
+ Memory DXE Policy definitions
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _MEMORY_DXE_CONFIG_H_
+#define _MEMORY_DXE_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#define MEMORY_DXE_CONFIG_REVISION 1
+
+/**
+ The Memory Configuration includes DIMM SPD address Map and DIMM Slot Mechanical present bit map.
+ The data elements should be initialized by a Platform Module.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27: Config Block Header
+/**
+ Offset 28:
+ Dimm SPD address
+ Only Server support 2 channels * 3 slots per channel = 6 sockets totally
+ The Desktop and mobile only support 2 channels * 2 slots per channel = 4 sockets totally
+ So there is mapping rule here for Desktop and mobile that there are no more 4 DIMMS totally in a system:
+ Channel A/ Slot 0 --> Dimm 0 --> SpdAddressTable[0]
+ Channel A/ Slot 1 --> Dimm 1 --> SpdAddressTable[1]
+ Channel B/ Slot 0 --> Dimm 2 --> SpdAddressTable[2]
+ Channel B/ Slot 1 --> Dimm 3 --> SpdAddressTable[3]
+ Refer to SmbiosMemory.c for use
+ If change the mapping rule, please update the Revision number.
+**/
+ UINT8 *SpdAddressTable;
+/**
+ Offset 36:
+ Channel A DIMM Slot Mechanical present bit map, bit 0 -> DIMM 0, bit 1 -> DIMM1, ...
+ if the bit is 1, the related DIMM slot is present.
+ E.g. if channel A has 2 DIMMs, ChannelASlotMap = 0x03;
+ E.g. if channel A has only 1 DIMMs, ChannelASlotMap = 0x01;
+ Refer to SmbiosMemory.c
+**/
+ UINT8 ChannelASlotMap;
+/**
+ Offset 37:
+ Channel B DIMM Slot Mechanical present bit map, bit 0 -> DIMM 0, bit 1 -> DIMM1, ...
+ if the bit is 1, the related DIMM slot is present.
+ E.g. if channel B has 2 DIMMs, ChannelBSlotMap = 0x03;
+ E.g. if channel B has only 1 DIMMs, ChannelBSlotMap = 0x01;
+ Refer to SmbiosMemory.c
+**/
+ UINT8 ChannelBSlotMap;
+ UINT8 MrcTimeMeasure; ///< Offset 38: MRC execution time measurement: <b>0=Disable</b>, 1=Enable
+ UINT8 MrcFastBoot; ///< Offset 39: Fast boot: 0=Disable, <b>1=Enable</b>
+} MEMORY_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _MEMORY_DXE_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MiscDxeConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MiscDxeConfig.h
new file mode 100644
index 0000000000..7a8894a5c0
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/MiscDxeConfig.h
@@ -0,0 +1,33 @@
+/** @file
+ MISC DXE policy definitions
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _MISC_DXE_CONFIG_H_
+#define _MISC_DXE_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#define MISC_DXE_CONFIG_REVISION 2
+
+/**
+ This data structure includes miscellaneous configuration variables such SA thermal device
+ control. The data elements should be initialized by a Platform Module.\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2:</b>
+ - Added RmrrCsmeBaseAddress fields.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ EFI_PHYSICAL_ADDRESS *RmrrUsbBaseAddress; ///< Offset 28 The field is used to describe the platform USB Reserved memory for Intel VT-d support. Platform code should provide this information for Intel VT-d DXE driver use
+ UINT32 EnableAbove4GBMmio : 1; ///< Offset 29:0 Enable/disable above 4GB MMIO resource support: <b>0=Disable</b>, 1=Enable
+ UINT32 RsvdBits0 : 31; ///< Offset 29:1 Reserved bits.
+ EFI_PHYSICAL_ADDRESS *RmrrCsmeBaseAddress; ///< The field is used to describe the CSME Reserved memory.
+} MISC_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _MISC_DXE_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/OverClockingConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/OverClockingConfig.h
new file mode 100644
index 0000000000..b623f14c15
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/OverClockingConfig.h
@@ -0,0 +1,51 @@
+/** @file
+ Policy definition for System Agent overclocking Config Block
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _OVERCLOCKING_PREMEM_CONFIG__H_
+#define _OVERCLOCKING_PREMEM_CONFIG__H_
+#pragma pack(push, 1)
+
+#define SA_OVERCLOCKING_CONFIG_REVISION 2
+
+/**
+ Defines the overclocking configuration parameters for System Agent.\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Add GT unslice support.
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0 :
+ Enable disable of SA overclocking mailbox commands.
+ If disabled, or if PcdSaOcEnable is disabled, all other policies in this config block are ignored.
+ <b>0=Disable</b>,
+ 1=Enable
+ **/
+ UINT32 OcSupport : 1;
+ UINT32 GtVoltageMode : 1; ///< Offset 28:1 :Specifies whether GT voltage is operating in Adaptive or Override mode: <b>0=Adaptive</b>, 1=Override
+ UINT32 RealtimeMemoryTiming : 1; ///< Offset 28:2 :Enable/Disable the message sent to the CPU to allow realtime memory timing changes after MRC_DONE. <b>0=Disable</b>, 1=Enable
+ UINT32 GtusVoltageMode : 1; ///< Offset 28:3 :Specifies whether GT unslice voltage is operating in Adaptive or Override mode: <b>0=Adaptive</b>, 1=Override
+ UINT32 RsvdBits0 : 28; ///< Offset 28:4 - 31 :Reserved for future use
+ UINT8 GtMaxOcRatio; ///< Offset 32 Maximum GT turbo ratio override: 0=Minimal, 255=Maximum, <b>0=AUTO</b>
+ UINT8 Rsvd0; ///< Offset 33 Reserved for DWORD alignment
+ INT16 GtVoltageOffset; ///< Offset 34 The voltage offset applied to GT slice. Valid range from -1000mv to 1000mv: <b>0=Minimal</b>, 1000=Maximum
+ UINT16 GtVoltageOverride; ///< Offset 36 The GT voltage override which is applied to the entire range of GT frequencies <b>0=Default</b>
+ UINT16 GtExtraTurboVoltage; ///< Offset 38 The adaptive voltage applied during turbo frequencies. Valid range from 0 to 2000mV: <b>0=Minimal</b>, 2000=Maximum
+ INT16 SaVoltageOffset; ///< Offset 40 The voltage offset applied to the SA. Valid range from -1000mv to 1000mv: <b>0=Default</b>
+ INT16 GtusVoltageOffset; ///< Offset 42 The voltage offset applied to GT unslice. Valid range from -1000mv to 1000mv: <b>0=Minimal</b>, 1000=Maximum
+ UINT16 GtusVoltageOverride; ///< Offset 44 The GT unslice voltage override which is applied to the entire range of GT frequencies: <b>0=Default</b>
+ UINT16 GtusExtraTurboVoltage; ///< Offset 46 The adaptive voltage applied during turbo frequencies. Valid range from 0 to 2000mV: <b>0=Default</b>
+ UINT8 GtusMaxOcRatio; ///< Offset 48 Maximum GTus turbo ratio override: 0=Minimal, 6=Maximum, <b>0=AUTO</b>
+ UINT8 Rsvd1[3]; ///< Offset 49-51 Reserved for DWORD alignment
+} OVERCLOCKING_PREMEM_CONFIG;
+#pragma pack(pop)
+
+#endif // _OVERCLOCKING_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PcieDxeConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PcieDxeConfig.h
new file mode 100644
index 0000000000..f0b9670f64
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PcieDxeConfig.h
@@ -0,0 +1,135 @@
+/** @file
+ PCIE DXE policy definitions
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCIE_DXE_CONFIG_H_
+#define _PCIE_DXE_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#define PCIE_DXE_CONFIG_REVISION 1
+
+///
+/// Device List for special ASPM override
+///
+typedef struct {
+ UINT16 VendorId; ///< Offset 0 PCI Configuration space offset 0
+ UINT16 DeviceId; ///< Offset 2 PCI Configuration space offset 2
+ UINT8 RevId; ///< Offset 4 PCI Configuration space offset 8; 0xFF means all steppings
+ UINT8 RootApmcMask; ///< Offset 5 Root ASPM override bit mask <b>0=No override</b>
+ UINT8 EndpointApmcMask; ///< Offset 6 Endpoint ASPM override bit mask <b>0=No override</b>
+ UINT8 Rsvd; ///< Offset 7 Reserved
+} PCIE_ASPM_OVERRIDE_LIST;
+
+typedef struct {
+ UINT16 VendorId; ///< Offset 0 PCI Config space offset 0
+ UINT16 DeviceId; ///< Offset 2 PCI Config space offset 2
+/**
+ Offset 4:
+ SnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BIT[14] - Should be set to 0b
+ BIT[13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+**/
+ UINT16 SnoopLatency;
+/**
+ Offset 6:
+ NonSnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BIT[14] - Should be set to 0b
+ BIT[13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Non Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+**/
+ UINT16 NonSnoopLatency;
+ UINT8 RevId; ///< Offset 8 PCI Config space offset 8; 0xFF means all steppings
+ UINT8 Rsvd0[3]; ///< Offset 9
+} PCIE_LTR_DEV_INFO;
+
+///
+/// PCIE Power Optimizer config
+///
+typedef struct {
+ UINT16 LtrMaxSnoopLatency; ///< Offset 0 LTR Maximum Snoop Latency: <b>0x0846=70us</b>
+ UINT16 LtrMaxNoSnoopLatency; ///< Offset 2 LTR Maximum Non-Snoop Latency: <b>0x0846=70us</b>
+ UINT8 ObffEnable; ///< Offset 4 LTR enable/disable: 0=Disable, <b>1=Enable</b>
+ UINT8 LtrEnable; ///< Offset 5 LTR enable/disable: 0=Disable, <b>1=Enable</b>
+ UINT8 Rsvd0[2]; ///< Offset 6 Reserved
+} SA_PCIE_PWR_OPT;
+
+
+/**
+ The PCI Express Configuration info includes PCI Resources Range Base and Limits and the control
+ for PEG ASPM.
+ The data elements should be initialized by a Platform Module.\n
+ @note <b>Optional.</b> These policies will be ignored if there is no PEG port present on board.
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+/**
+ Offset 28: This field is used to describe the ASPM control for PEG Ports\n
+ 0=ASPM Disabled, 1=ASPM L0s Enabled, 2=ASPM L1 Enabled, 3=ASPM L0sL1 Enabled, <b>4=ASPM AUTO</b>
+**/
+ UINT8 PegAspm[SA_PEG_MAX_FUN];
+/**
+ Offset 32: This field is used to describe the PEG L0s advanced control
+ 0=ASPM L0s disabled, 1=ASPM L0s enabled on RP, 2=ASPM L0s enabled on EP, <b>3=ASPM L0s enabled on both RP and EP</b>
+**/
+ UINT8 PegAspmL0s[SA_PEG_MAX_FUN];
+/**
+ Offset 36: PCIe Hot Plug Enable/Disable. It has 2 policies.
+ - <b>Disabled (0x0)</b> : No hotplug.
+ - Enabled (0x1) : Bios assist hotplug.
+**/
+ UINT8 PegRootPortHPE[SA_PEG_MAX_FUN];
+/**
+ Offset 40: This field is used as a pointer to the ASPM device override table, default points to an\n
+ existing table mPcieAspmDevsOverride\n
+ Refer to DxeSaPolicyLib.c for the usage.
+ Note: This exclusion list helps avoid potential system hangs.
+**/
+ PCIE_ASPM_OVERRIDE_LIST *PcieAspmDevsOverride;
+/**
+ Offset 48: This field is used as a pointer to the LTR device override table, default points to an existing
+ table mPcieLtrDevsOverride.\n
+ Refer to DxeSaPolicyLib.c for the usage.
+**/
+ PCIE_LTR_DEV_INFO *PcieLtrDevsOverride;
+ SA_PCIE_PWR_OPT PegPwrOpt[SA_PEG_MAX_FUN]; ///< Offset 60: This field is used to describe the PCIe LTR/OBFF relevant settings
+ UINT8 Rsvd1[3]; /// Reserved for future use
+} PCIE_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _PCIE_DXE_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiConfig.h
new file mode 100644
index 0000000000..7899504865
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiConfig.h
@@ -0,0 +1,60 @@
+/** @file
+ Policy definition for PCIe Config Block
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCIE_PEI_CONFIG_H_
+#define _PCIE_PEI_CONFIG_H_
+
+#include <Library/GpioLib.h>
+#include <SaAccess.h>
+
+#pragma pack(push, 1)
+
+#define SA_PCIE_PEI_CONFIG_REVISION 1
+
+/**
+ PCI Express and DMI controller configuration - PostMem\n
+ @note <b>Optional.</b> These policies will be ignored if there is no PEG port present on board.
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0
+ <b>(Test)</b>DMI Extended Sync Control
+ - <b>Disabled</b> (0x0) : Disable DMI Extended Sync (Default)
+ - Enabled (0x1) : Enable DMI Extended Sync
+ **/
+ UINT32 DmiExtSync : 1;
+ /**
+ Offset 28:1
+ <b>(Test)</b>DMI IOT Control
+ - <b>Disabled</b> (0x0) : Disable DMI IOT (Default)
+ - Enabled (0x1) : Enable DMI IOT
+ **/
+ UINT32 DmiIot : 1;
+ UINT32 RsvdBits1 : 30; ///< Offset 28:2-31 :Reserved for future use.
+ UINT8 DmiAspm; ///< Offset 32 This field is used to describe the ASPM control for DMI: <b>3=PcieAspmL0sL1</b>, 2=PcieAspmL1, 1=PcieAspmL0s, 0=PcieAspmDisabled.
+ UINT8 Rsvd1[3]; ///< Offset 33 to 35
+ UINT8 PegDeEmphasis[SA_PEG_MAX_FUN]; ///< Offset 36 This field is used to describe the DeEmphasis control for PEG (-6 dB and -3.5 dB are the options)SA_PEG_MAX_FUN = 3 for CFL and SA_PEG_MAX_FUN = 4 for CNL, offsets are adjusted accordingly
+ UINT8 PegMaxPayload[SA_PEG_MAX_FUN]; ///< <b>(Test)</b> Offset 39/40 This field is used to describe the PEG Max Pay Load Size (0xFF: Auto, 0:128B, 1:256B)
+ /**
+ PCIe Slot Power Capabilities. SlotPowerLimitValue in combination with SlotPowerLimitScale specifies the upper limit on power supplied by slot.
+ **/
+ UINT8 PegSlotPowerLimitValue[SA_PEG_MAX_FUN]; ///< Offset 42/44 8 bit value
+ UINT8 PegSlotPowerLimitScale[SA_PEG_MAX_FUN]; ///< Offset 45/48 2 bit value: <b>00 = 1.0x</b>, 01 = 0.1x, 10 = 0.01x and 11 = 0.001x
+ /**
+ Offset 48/52
+ PCIe Physical Slot Number (13 bit value). Indicates the physical slot number attached to the port.
+ **/
+ UINT16 PegPhysicalSlotNumber[SA_PEG_MAX_FUN];
+ UINT8 Rsvd2[2];
+} PCIE_PEI_CONFIG;
+#pragma pack(pop)
+
+#endif // _PCIE_PEI_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiPreMemConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiPreMemConfig.h
new file mode 100644
index 0000000000..a53bf3c7bd
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/PciePeiPreMemConfig.h
@@ -0,0 +1,354 @@
+/** @file
+ Policy definition for PCIe Config Block
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PCIE_PEI_PREMEM_CONFIG_H_
+#define _PCIE_PEI_PREMEM_CONFIG_H_
+
+#include <Library/GpioLib.h>
+#include <SaAccess.h>
+
+#pragma pack(push, 1)
+
+#define SA_PCIE_PEI_PREMEM_CONFIG_REVISION 3
+
+///
+/// SA GPIO Data Structure
+///
+typedef struct {
+ GPIO_PAD GpioPad; ///< Offset 0: GPIO Pad
+ UINT8 Value; ///< Offset 4: GPIO Value
+ UINT8 Rsvd0[3]; ///< Offset 5: Reserved for 4 bytes alignment
+ UINT32 Active :1; ///< Offset 8: 0=Active Low; 1=Active High
+ UINT32 RsvdBits0:31;
+} SA_GPIO_INFO_PCIE;
+
+///
+/// SA Board PEG GPIO Info
+///
+typedef struct {
+ SA_GPIO_INFO_PCIE SaPeg0ResetGpio; ///< Offset 0: PEG0 PERST# GPIO assigned, must be a PCH GPIO pin
+ SA_GPIO_INFO_PCIE SaPeg3ResetGpio; ///< Offset 12: PEG3 PERST# GPIO assigned, must be a PCH GPIO pin
+ BOOLEAN GpioSupport; ///< Offset 24: 1=Supported; 0=Not Supported
+ UINT8 Rsvd0[3]; ///< Offset 25: Reserved for 4 bytes alignment
+} PEG_GPIO_DATA;
+
+
+/**
+ PCI Express and DMI controller configuration\n
+ @note <b>Optional.</b> These policies will be ignored if there is no PEG port present on board.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Change PegGen3RxCtleOverride of PCIE_PEI_PREMEM_CONFIG from one bit to UINT8
+ - Change DmiGen3RxCtlePeaking default to 0
+ <b>Revision 3</b>:
+ - Added PEG IMR support
+ - Added UINT8 PegImrEnable
+ - Added UINT16 PegImrSize
+ - Added UINT8 ImrRpSelection
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0 :
+ <b>(Test)</b> DMI Link Speed Control
+ - <b>Auto</b> (0x0) : Maximum possible link speed (Default)
+ - Gen1 (0x1) : Limit Link to Gen1 Speed
+ - Gen2 (0x2) : Limit Link to Gen2 Speed
+ - Gen3 (0x3) : Limit Link to Gen3 Speed
+ **/
+ UINT32 DmiMaxLinkSpeed : 2;
+ /**
+ Offset 28:2 :
+ <b>(Test)</b> DMI Equalization Phase 2 Enable Control
+ - Disabled (0x0) : Disable phase 2
+ - Enabled (0x1) : Enable phase 2
+ - <b>Auto</b> (0x2) : Use the current default method (Default)
+ **/
+ UINT32 DmiGen3EqPh2Enable : 2;
+ /**
+ Offset 28:4 :
+ <b>(Test)</b> Selects the method for performing Phase3 of Gen3 Equalization on DMI
+ - <b>Auto</b> (0x0) : Use the current default method (Default)
+ - HwEq (0x1) : Use Adaptive Hardware Equalization
+ - SwEq (0x2) : Use Adaptive Software Equalization (Implemented in BIOS Reference Code)
+ - Static (0x3) : Use the Static EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just Phase1)
+ - Disabled (0x4) : Bypass Equalization Phase 3
+ **/
+ UINT32 DmiGen3EqPh3Method : 3;
+ /**
+ Offset 28:7 :
+ <b>(Test)</b> Program DMI Gen3 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 DmiGen3ProgramStaticEq : 1;
+
+ /**
+ Offset 28:8 to 28:15 :
+ <b>(Test)</b> PEG Enable Control
+ - Disabled (0x0) : Disable PEG Port
+ - Enabled (0x1) : Enable PEG Port (If Silicon SKU permits it)
+ - <b>Auto</b> (0x2) : If an endpoint is present, enable the PEG Port, Disable otherwise (Default)
+ **/
+ UINT32 Peg0Enable : 2; ///< Enable/Disable PEG 0:1:0 Root Port
+ UINT32 Peg1Enable : 2; ///< <b>(Test)</b> Enable/Disable PEG 0:1:1 Root Port
+ UINT32 Peg2Enable : 2; ///< <b>(Test)</b> Enable/Disable PEG 0:1:2 Root Port
+ UINT32 Peg3Enable : 2; ///< <b>(Test)</b> Enable/Disable PEG 0:6:0 Root Port.
+
+ /**
+ Offset 28:16 :
+ <b>(Test)</b> PCIe Link Speed Control
+ - <b>Auto</b> (0x0) : Maximum possible Link speed (Default)
+ - Gen1 (0x1) : Limit Link to Gen1 Speed
+ - Gen2 (0x2) : Limit Link to Gen2 Speed
+ - Gen3 (0x3) : Limit Link to Gen3 Speed
+ **/
+ UINT32 Peg0MaxLinkSpeed : 2; ///< PCIe Link Speed Control for PEG 0:1:0 Root Port.
+ UINT32 Peg1MaxLinkSpeed : 2; ///< <b>(Test)</b> PCIe Link Speed Control for PEG 0:1:1 Root Port.
+ UINT32 Peg2MaxLinkSpeed : 2; ///< <b>(Test)</b> PCIe Link Speed Control for PEG 0:1:2 Root Port.
+ UINT32 Peg3MaxLinkSpeed : 2; ///< <b>(Test)</b> PCIe Link Speed Control for PEG 0:6:0 Root Port.
+ UINT32 RsvdBits0 : 8; ///< Offset 28:24 :Reserved for future use
+
+ /**
+ Offset 32:0 :
+ <b>(Test)</b> PCIe Link Width Control
+ - <b>Auto</b> (0x0) : Maximum possible Link width (Default)
+ - X1 (0x1) : Limit Link to X1 Width
+ - X2 (0x2) : Limit Link to X2 Width
+ - X4 (0x3) : Limit Link to X4 Width
+ - X8 (0x4) : Limit Link to X8 Width
+ **/
+ UINT32 Peg0MaxLinkWidth : 3; ///< PCIe Link Width Control for PEG 0:1:0 Root Port.
+ UINT32 Peg1MaxLinkWidth : 3; ///< <b>(Test)</b> PCIe Link Width Control for PEG 0:1:1 Root Port.
+ UINT32 Peg2MaxLinkWidth : 3; ///< <b>(Test)</b> PCIe Link Width Control for PEG 0:1:2 Root Port.
+ UINT32 Peg3MaxLinkWidth : 3; ///< <b>(Test)</b> PCIe Link Width Control for PEG 0:6:0 Root Port.
+ /**
+ Offset 32:12 to 32:15 :
+ Power down unused lanes on the PEG Root Port.
+ - Disabled (0x0) : No power saving.
+ - <b>Auto</b> (0x1) : Bios will power down unused lanes based on the max possible link width
+ **/
+ UINT32 Peg0PowerDownUnusedLanes : 1; ///< Power down unused lanes on the PEG 0:1:0 Root Port.
+ UINT32 Peg1PowerDownUnusedLanes : 1; ///< Power down unused lanes on the PEG 0:1:1 Root Port.
+ UINT32 Peg2PowerDownUnusedLanes : 1; ///< Power down unused lanes on the PEG 0:1:2 Root Port.
+ UINT32 Peg3PowerDownUnusedLanes : 1; ///< Power down unused lanes on the PEG 0:6:0 Root Port.
+
+ /**
+ Offset 32:16 to 32:23 :
+ <b>(Test)</b> PCIe Equalization Phase 2 Enable Control
+ - Disabled (0x0) : Disable phase 2
+ - Enabled (0x1) : Enable phase 2
+ - <b>Auto</b> (0x2) : Use the current default method (Default)
+ **/
+ UINT32 Peg0Gen3EqPh2Enable : 2; ///< Phase2 EQ enable on the PEG 0:1:0 Root Port.
+ UINT32 Peg1Gen3EqPh2Enable : 2; ///< <b>(Test)</b> Phase2 EQ enable on the PEG 0:1:1 Root Port.
+ UINT32 Peg2Gen3EqPh2Enable : 2; ///< <b>(Test)</b> Phase2 EQ enable on the PEG 0:1:2 Root Port.
+ UINT32 Peg3Gen3EqPh2Enable : 2; ///< <b>(Test)</b> Phase2 EQ enable on the PEG 0:6:0 Root Port.
+ UINT32 RsvdBits1 : 8; ///< Offset 32:24 :Reserved for future use
+ /**
+ Offset 36:0 to 36:11 :
+ <b>(Test)</b> Select the method for performing Phase3 of Gen3 Equalization.
+ - <b>Auto</b> (0x0) : Use the current default method (Default)
+ - HwEq (0x1) : Use Adaptive Hardware Equalization
+ - SwEq (0x2) : Use Adaptive Software Equalization (Implemented in BIOS Reference Code)
+ - Static (0x3) : Use the Static EQs provided in PegGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just Phase1)
+ - Disabled (0x4) : Bypass Equalization Phase 3
+ **/
+ UINT32 Peg0Gen3EqPh3Method : 3; ///< Phase3 EQ method on the PEG 0:1:0 Root Port.
+ UINT32 Peg1Gen3EqPh3Method : 3; ///< <b>(Test)</b> Phase3 EQ method on the PEG 0:1:1 Root Port.
+ UINT32 Peg2Gen3EqPh3Method : 3; ///< <b>(Test)</b> Phase3 EQ method on the PEG 0:1:2 Root Port.
+ UINT32 Peg3Gen3EqPh3Method : 3; ///< <b>(Test)</b> Phase3 EQ method on the PEG 0:6:0 Root Port.
+ /**
+ Offset 36:12 :
+ <b>(Test)</b> Program PEG Gen3 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 PegGen3ProgramStaticEq : 1;
+ /**
+ Offset 36:13 :
+ <b>(Test)</b> Always Attempt Gen3 Software Equalization
+
+ When enabled, Gen3 Software Equalization will be executed every boot. When disabled, it will be only executed if the CPU
+ or EP is changed, otherwise it is skipped and the previous EQ value will be re-used.
+
+ This setting will only have an effect if Software Equalization is enabled and OEM Platform Code implements
+ save/restore of the PegDataPtr data (see below). If PegDataPtr is not saved/restored RC forces this to be enabled.
+
+ - <b>Disabled</b> (0x0) : Reuse EQ settings saved/restored from NVRAM whenever possible (Default)
+ - Enabled (0x1) : Re-test and generate new EQ values every boot, not recommended
+ **/
+ UINT32 Gen3SwEqAlwaysAttempt : 1;
+ /**
+ Offset 36:14 to 36:16 :
+ <b>(Test)</b> Select number of TxEq presets to test in the PCIe/DMI Software Equalization Algorithm
+ - P7,P3,P5,P8 (0x0) : Test Presets 7, 3, 5, and 8
+ - P0-P9 (0x1) : Test Presets 0-9
+ - <b>Auto</b> (0x2) : Use the current default method (Default)
+ Auto will test Presets 7, 3, 5, and 8. It is possible for this default to change over time;
+ using "Auto" will ensure Reference Code always uses the latest default settings.
+ @warning Do not change from the default. Hard to detect issues are likely.
+ **/
+ UINT32 Gen3SwEqNumberOfPresets : 3;
+ /**
+ Offset 36:17 to 36:18:
+ <b>(Test)</b> Offset 36 Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization Algorithm
+ - Disabled (0x0) : Disable VOC Test
+ - Enabled (0x1) : Enable VOC Test
+ - <b>Auto</b> (0x2) : Use the current default (Default)
+ **/
+ UINT32 Gen3SwEqEnableVocTest : 2;
+ /**
+ Offset 36:19 :
+ Select when PCIe ASPM programming will happen in relation to the Oprom
+ - <b>Before</b> (0x0) : Do PCIe ASPM programming before Oprom. (Default)
+ - After (0x1) : Do PCIe ASPM programming after Oprom. This will require an SMI handler to save/restore ASPM settings.
+ **/
+ UINT32 InitPcieAspmAfterOprom : 1;
+ /**
+ Offset 36:20 :
+ <b>(Test)</b> PCIe Rx Compliance Testing Mode
+ - <b>Disabled</b> (0x0) : Normal Operation - Disable PCIe Rx Compliance testing (Default)
+ - Enabled (0x1) : PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; it should only be set when doing PCIe compliance testing
+ **/
+ UINT32 PegRxCemTestingMode : 1;
+
+ /**
+ Offset 36:21 to 36:24 :
+ <b>(Test)</b> PCIe Rx Compliance Loopback Lane
+
+ When PegRxCemTestingMode is Enabled, the specificied Lane (0 - 15) will be
+ used for RxCEMLoopback.
+
+ Default is Lane 0.
+ **/
+ UINT32 PegRxCemLoopbackLane : 4;
+ /**
+ Offset 36:25 to 36:28 :
+ <b>(Test)</b> Generate PCIe BDAT Margin Table. Set this policy to enable the generation and addition of PCIe margin data to the BDAT table.
+ - <b>Disabled</b> (0x0) : Normal Operation - Disable PCIe BDAT margin data generation (Default)
+ - PortData (0x1) : Port Data - Generate PCIe BDAT margin data
+ **/
+ UINT32 PegGenerateBdatMarginTable : 4;
+ /**
+ Offset 36:29 :
+ <b>(Test)</b> PCIe Non-Protocol Awareness for Rx Compliance Testing
+ - <b>Disabled</b> (0x0) : Normal Operation - Disable non-protocol awareness (Default)
+ - Enabled (0x1) : Non-Protocol Awareness Enabled - Enable non-protocol awareness for compliance testing
+ **/
+ UINT32 PegRxCemNonProtocolAwareness : 1;
+ /**
+ Offset 36:30 :
+ <b>(Test)</b> PCIe Disable Spread Spectrum Clocking. This feature should be TRUE only for compliance testing
+ - <b>False</b> (0x0) : Normal Operation - SSC enabled (Default)
+ - True (0x1) : Disable SSC - Disable SSC for compliance testing
+ **/
+ UINT32 PegDisableSpreadSpectrumClocking : 1;
+
+ UINT32 RsvdBits2 : 1;
+
+ UINT8 DmiGen3RootPortPreset[SA_DMI_MAX_LANE]; ///< Offset 40 Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 DmiGen3EndPointPreset[SA_DMI_MAX_LANE]; ///< Offset 44 Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 DmiGen3EndPointHint[SA_DMI_MAX_LANE]; ///< Offset 48 Hint value per lane for the DMI Gen3 End Point. Range: 0-6, 2 is default for each lane
+ /**
+ Offset 52 :
+ DMI Gen3 RxCTLEp per-Bundle control. The range of the setting is (0-15). This setting
+ has to be specified based upon platform design and must follow the guideline. Default is 0.
+ **/
+
+ UINT8 DmiGen3RxCtlePeaking[SA_DMI_MAX_BUNDLE];
+
+ UINT8 PegGen3RootPortPreset[SA_PEG_MAX_LANE]; ///< Offset 54 <b>(Test)</b> Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 PegGen3EndPointPreset[SA_PEG_MAX_LANE]; ///< Offset 70 <b>(Test)</b> Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 PegGen3EndPointHint[SA_PEG_MAX_LANE]; ///< Offset 86 <b>(Test)</b> Hint value per lane for the PEG Gen3 End Point. Range: 0-6, 2 is default for each lane
+ /**
+ Offset 102:
+ PCIe Gen3 RxCTLEp per-Bundle control. The range of the setting is (0-15). This setting
+ has to be specified based upon platform design and must follow the guideline. Default is 12.
+ **/
+ UINT8 PegGen3RxCtlePeaking[SA_PEG_MAX_BUNDLE];
+ /**
+ Offset 110:
+ <b>(Test)</b>Used for PCIe Gen3 Software Equalization. Range: 0-65535, default is 1000.
+ @warning Do not change from the default. Hard to detect issues are likely.
+ @note An attack on this policy could result in an apparent hang,
+ but the system will eventually boot. This variable should be protected.
+ **/
+ UINT16 Gen3SwEqJitterDwellTime;
+ /**
+ Offset 112:
+ This is a memory data pointer for saved preset search results. The reference code will store
+ the Gen3 Preset Search results in the SaPegHob. In order to skip the Gen3
+ preset search on boots where the PEG card configuration has not changed since the previous boot,
+ platform code can save the contents of the SaPegHob in DXE (When it present and for size reported by Header.HobLength)
+ and provide a pointer to a restored copy of that data. Default value is NULL, which results in a full
+ preset search every boot.
+
+ @note An attack on this policy could prevent the PCIe display from working until a boot when
+ PegDataPtr is NULL or Gen3SwEqAlwaysAttempt is enabled. The variable used to save the
+ preset search results should be protected in a way that it can only be modified by the
+ platform manufacturer.
+ **/
+ VOID *PegDataPtr;
+ /**
+ Offset 116:
+ <b>(Test)</b>Used for PCIe Gen3 Software Equalization. Range: 0-65535, default is 1.
+ @warning Do not change from the default. Hard to detect issues are likely.
+ **/
+ UINT16 Gen3SwEqJitterErrorTarget;
+
+ /**
+ Offset 118:
+ <b>(Test)</b>Used for PCIe Gen3 Software Equalization. Range: 0-65535, default is 10000.
+ @warning Do not change from the default. Hard to detect issues are likely.
+ @note An attack on this policy could result in an apparent hang,
+ but the system will eventually boot. This variable should be protected.
+ **/
+ UINT16 Gen3SwEqVocDwellTime;
+
+ /**
+ Offset 120:
+ <b>(Test)</b>Used for PCIe Gen3 Software Equalization. Range: 0-65535, default is 2.
+ @warning Do not change from the default. Hard to detect issues are likely.
+ **/
+ UINT16 Gen3SwEqVocErrorTarget;
+ /**
+ Offset 122:
+ PCIe Hot Plug Enable/Disable. It has 2 policies.
+ - Disabled (0x0) : No hotplug.
+ - Enabled (0x1) : Bios assist hotplug.
+ **/
+ UINT8 PegRootPortHPE[SA_PEG_MAX_FUN];
+ UINT8 DmiDeEmphasis; ///< Offset 125 This field is used to describe the DeEmphasis control for DMI (-6 dB and -3.5 dB are the options)
+ UINT8 Rsvd0[2]; ///< Offset 126
+ /**
+ Offset 128:
+ This contains the PCIe PERST# GPIO information. This structure is required
+ for PCIe Gen3 operation. The reference code will use the information in this structure in
+ order to reset PCIe Gen3 devices during equalization, if necessary. Refer to the Platform
+ Developer's Guide (PDG) for additional details.
+ **/
+ PEG_GPIO_DATA PegGpioData;
+
+ /**
+ Offset 156
+ <b>(Test)</b> PCIe Override RxCTLE. This feature should only be true to disable RxCTLE adaptive behavior for compliance testing
+ - <b>False</b> (0x0) : Normal Operation - RxCTLE adaptive behavior enabled (Default)
+ - True (0x1) : Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE peak values unmodified
+ From CFL onwards, modularity is introduced to this setup option so that the RxCTLE adaptive behavior could be controlled at the controller level.
+ Making this variable a UINT8 to accomodate the values of all controllers as bit definition
+ **/
+ UINT8 PegGen3RxCtleOverride;
+ UINT8 Reserved1;
+ UINT16 Reserved2;
+
+} PCIE_PEI_PREMEM_CONFIG;
+#pragma pack(pop)
+
+#endif // _PCIE_PEI_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiConfig.h
new file mode 100644
index 0000000000..12648b836b
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiConfig.h
@@ -0,0 +1,61 @@
+/** @file
+ Policy details for miscellaneous configuration in System Agent
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_MISC_PEI_CONFIG_H_
+#define _SA_MISC_PEI_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#ifndef SA_MC_MAX_SOCKETS
+#define SA_MC_MAX_SOCKETS 4
+#endif
+
+#define SA_MISC_PEI_CONFIG_REVISION 1
+
+///
+/// Subsystem Vendor ID / Subsystem ID
+///
+typedef struct _SA_DEFAULT_SVID_SID{
+ UINT16 SubSystemVendorId;
+ UINT16 SubSystemId;
+} SA_DEFAULT_SVID_SID;
+
+/**
+ This configuration block is to configure SA Miscellaneous variables during PEI Post-Mem.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0
+ This policy is used to control enable or disable System Agent Thermal device (0,4,0).
+ The default value is <b>1: TRUE</b> for WHL, and <b>0: FALSE</b> for all other CPU's
+ **/
+ UINT32 Device4Enable:1;
+ /**
+ Offset 28:1
+ <b>(Test)</b>This policy is used to control enable or disable System Agent Chap device (0,7,0).
+ <b>0=FALSE</b>,
+ 1=TRUE.
+ **/
+ UINT32 ChapDeviceEnable:1;
+ /**
+ Offset 28:2
+ For Platforms supporting Intel(R) SIPP, this policy is use control enable/disable Compatibility Revision ID (CRID) feature.
+ <b>0=FALSE</b>,
+ 1=TRUE
+ **/
+ UINT32 CridEnable:1;
+ UINT32 SkipPamLock:1; ///< Offset 28:3 :To skip PAM register locking. @note It is still recommended to set PCI Config space B0: D0: F0: Offset 80h[0]=1 in platform code even Silicon code skipped this.\n <b>0=All PAM registers will be locked in Silicon code</b>, 1=Skip lock PAM registers in Silicon code.
+ UINT32 EdramTestMode:2; ///< Offset 28:4 :EDRAM Test Mode. For EDRAM stepping - 0- EDRAM SW Disable, 1- EDRAM SW Enable, <b> 2- EDRAM HW Mode</b>
+ UINT32 RsvdBits0 :26; ///< Offset 28:7 :Reserved for future use
+} SA_MISC_PEI_CONFIG;
+#pragma pack(pop)
+
+#endif // _SA_MISC_PEI_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h
new file mode 100644
index 0000000000..2c831404ef
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SaMiscPeiPreMemConfig.h
@@ -0,0 +1,103 @@
+/** @file
+ Policy details for miscellaneous configuration in System Agent
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_MISC_PEI_PREMEM_CONFIG_H_
+#define _SA_MISC_PEI_PREMEM_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#ifndef SA_MC_MAX_SOCKETS
+#define SA_MC_MAX_SOCKETS 4
+#endif
+
+#define SA_MISC_PEI_PREMEM_CONFIG_REVISION 3
+
+/**
+ This configuration block is to configure SA Miscellaneous variables during PEI Pre-Mem phase like programming
+ different System Agent BARs, TsegSize, IedSize, MmioSize required etc.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - add BdatTestType, default is RMT
+ <b>Revision 3</b>:
+ - Remove SgSubSystemId.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 SpdAddressTable[SA_MC_MAX_SOCKETS];///< Offset 28 Memory DIMMs' SPD address for reading SPD data. <b>example: SpdAddressTable[0]=0xA2(C0D0), SpdAddressTable[1]=0xA0(C0D1), SpdAddressTable[2]=0xA2(C1D0), SpdAddressTable[3]=0xA0(C1D1)</b>
+ VOID *S3DataPtr; ///< Offset 32 Memory data save pointer for S3 resume. The memory space should be allocated and filled with proper S3 resume data on a resume path
+ UINT32 MchBar; ///< Offset 36 Address of System Agent MCHBAR: <b>0xFED10000</b>
+ UINT32 DmiBar; ///< Offset 40 Address of System Agent DMIBAR: <b>0xFED18000</b>
+ UINT32 EpBar; ///< Offset 44 Address of System Agent EPBAR: <b>0xFED19000</b>
+ UINT32 SmbusBar; ///< Offset 48 Address of System Agent SMBUS BAR: <b>0xEFA0</b>
+ UINT32 GdxcBar; ///< Offset 52 Address of System Agent GDXCBAR: <b>0xFED84000</b>
+ /**
+ Offset 56 Size of TSEG in bytes. (Must be power of 2)
+ <b>0x400000</b>: 4MB for Release build (When IED enabled, it will be 8MB)
+ 0x1000000 : 16MB for Debug build (Regardless IED enabled or disabled)
+ **/
+ UINT32 TsegSize;
+ UINT32 EdramBar; ///< Offset 60 Address of System Agent EDRAMBAR: <b>0xFED80000</b>
+ /**
+ Offset 64
+ <b>(Test)</b> Size of IED region in bytes.
+ <b>0</b> : IED Disabled (no memory occupied)
+ 0x400000 : 4MB SMM memory occupied by IED (Part of TSEG)
+ <b>Note: Enabling IED may also enlarge TsegSize together.</b>
+ **/
+ UINT32 IedSize;
+ UINT8 UserBd; ///< Offset 68 <b>0=Mobile/Mobile Halo</b>, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile Halo, 7=UP Server
+ UINT8 SgMode; ///< Offset 69 SgMode: <b>0=Disabled</b>, 1=SG Muxed, 2=SG Muxless, 3=PEG
+ UINT16 SgDelayAfterPwrEn; ///< Offset 70 Dgpu Delay after Power enable using Setup option: 0=Minimal, 1000=Maximum, <b>300=300 microseconds</b>
+ UINT16 SgDelayAfterHoldReset; ///< Offset 72 Dgpu Delay after Hold Reset using Setup option: 0=Minimal, 1000=Maximum, <b>100=100 microseconds</b>
+ UINT32 SkipExtGfxScan:1; ///< <b>(Test)</b> OFfset 74:0 :1=Skip External Gfx Device Scan; <b>0=Scan for external graphics devices</b>. Set this policy to skip External Graphics card scanning if the platform uses Internal Graphics only.
+ UINT32 BdatEnable:1; ///< Offset 74:1 :This field enables the generation of the BIOS DATA ACPI Tables: <b>0=FALSE</b>, 1=TRUE.
+ UINT32 TxtImplemented:1; ///< OFfset 74:2 :This field currently is used to tell MRC if it should run after TXT initializatoin completed: <b>0=Run without waiting for TXT</b>, 1=Run after TXT initialization by callback
+ /**
+ Offset 74:3 :
+ <b>(Test)</b> Scan External Discrete Graphics Devices for Legacy Only VGA OpROMs
+
+ When enabled, if the primary graphics device is an external discrete graphics device, Si will scan the
+ graphics device for legacy only VGA OpROMs. If the primary graphics device only implements legacy VBIOS, then the
+ LegacyOnlyVgaOpRomDetected field in the SA_DATA_HOB will be set to 1.
+
+ This is intended to ease the implementation of a BIOS feature to automatically enable CSM if the Primary Gfx device
+ only supports Legacy VBIOS (No UEFI GOP Present). Otherwise disabling CSM won't result in no video being displayed.
+ This is useful for platforms that implement PCIe slots that allow the end user to install an arbitrary Gfx device.
+
+ This setting will only take effect if SkipExtGfxScan == 0. It is ignored otherwise.
+
+ - Disabled (0x0) : Don't Scan for Legacy Only VGA OpROMs (Default)
+ - <b>Enabled</b> (0x1) : Scan External Gfx for Legacy Only VGA OpROM
+ **/
+ UINT32 ScanExtGfxForLegacyOpRom:1;
+ UINT32 RsvdBits0 :28; ///< OFfset 74:4 :Reserved for future use
+ UINT8 LockPTMregs; ///< <b>(Test)</b> Offset 78 Lock PCU Thermal Management registers: 0=FALSE, <b>1=TRUE</b>
+ UINT8 BdatTestType; ///< Offset 79 When BdatEnable is set to TRUE, this option selects the type of data which will be populated in the BIOS Data ACPI Tables: <b>0=RMT</b>, 1=RMT Per Bit, 2=Margin 2D.
+ UINT8 Rsvd1[4]; ///< Offset 80 Reserved for future use
+ /**
+ Offset 84 :
+ Size of reserved MMIO space for PCI devices\n
+ <b>0=AUTO</b>, 512=512MB, 768=768MB, 1024=1024MB, 1280=1280MB, 1536=1536MB, 1792=1792MB,
+ 2048=2048MB, 2304=2304MB, 2560=2560MB, 2816=2816MB, 3072=3072MB\n
+ When AUTO mode selected, the MMIO size will be calculated by required MMIO size from PCIe devices detected.
+ **/
+ UINT16 MmioSize;
+ INT16 MmioSizeAdjustment; ///< Offset 86 Increase (given positive value) or Decrease (given negative value) the Reserved MMIO size when Dynamic Tolud/AUTO mode enabled (in MBs): <b>0=no adjustment</b>
+ UINT64 AcpiReservedMemoryBase; ///< Offset 88 The Base address of a Reserved memory buffer allocated in previous boot for S3 resume used. Originally it is retrieved from AcpiVariableCompatibility variable.
+ UINT64 SystemMemoryLength; ///< Offset 96 Total system memory length from previous boot, this is required for S3 resume. Originally it is retrieved from AcpiVariableCompatibility variable.
+ UINT32 AcpiReservedMemorySize; ///< Offset 104 The Size of a Reserved memory buffer allocated in previous boot for S3 resume used. Originally it is retrieved from AcpiVariableCompatibility variable.
+ UINT32 OpRomScanTempMmioBar; ///< <b>(Test)</b> Offset 108 Temporary address to MMIO map OpROMs during VGA scanning. Used for ScanExtGfxForLegacyOpRom feature. MUST BE 16MB ALIGNED!
+ UINT32 OpRomScanTempMmioLimit; ///< <b>(Test)</b> Offset 112 Limit address for OpROM MMIO range. Used for ScanExtGfxForLegacyOpRom feature. (OpROMScanTempMmioLimit - OpRomScanTempMmioBar) MUST BE >= 16MB!
+
+ // Since the biggest element is UINT64, this structure should be aligned with 64 bits.
+ UINT8 Rsvd[4]; ///< Reserved for config block alignment.
+} SA_MISC_PEI_PREMEM_CONFIG;
+#pragma pack(pop)
+
+#endif // _SA_MISC_PEI_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SwitchableGraphicsConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SwitchableGraphicsConfig.h
new file mode 100644
index 0000000000..cc6179a61c
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/SwitchableGraphicsConfig.h
@@ -0,0 +1,63 @@
+/** @file
+ Switchable Graphics policy definitions
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SWITCHABLE_GRAPHICS_CONFIG_H_
+#define _SWITCHABLE_GRAPHICS_CONFIG_H_
+
+#define SWITCHABLE_GRAPHICS_CONFIG_REVISION 1
+
+#define GP_ENABLE 1
+#define GP_DISABLE 0
+
+#pragma pack(push, 1)
+///
+/// GPIO Support
+///
+typedef enum {
+ NotSupported = 0,
+ PchGpio,
+ I2CGpio,
+} GPIO_SUPPORT;
+
+///
+/// SA GPIO Data Structure
+///
+typedef struct {
+ UINT8 ExpanderNo; ///< Offset 0 Expander No For I2C based GPIO
+ BOOLEAN Active; ///< Offset 1 0=Active Low; 1=Active High
+ UINT8 Rsvd0[2]; ///< Offset 2 Reserved
+ UINT32 GpioNo; ///< Offset 4 GPIO pad
+} SA_GPIO_INFO;
+
+/**
+ SA PCIE RTD3 GPIO Data Structure
+**/
+typedef struct {
+ SA_GPIO_INFO HoldRst; ///< Offset 0 This field contain PCIe HLD RESET GPIO value and level information
+ SA_GPIO_INFO PwrEnable; ///< Offset 8 This field contain PCIe PWR Enable GPIO value and level information
+ UINT32 WakeGpioNo; ///< Offset 16 This field contain PCIe RTD3 Device Wake GPIO Number
+ UINT8 GpioSupport; ///< Offset 20 Depends on board design the GPIO configuration may be different: <b>0=Not Supported</b>, 1=PCH Based, 2=I2C based
+ UINT8 Rsvd0[3]; ///< Offset 21
+} SA_PCIE_RTD3_GPIO;
+
+/**
+ This Configuration block configures SA PCI Express 0/1/2 RTD3 GPIOs & Root Port.
+ Swithable Gfx/Hybrid Gfx uses the same GPIOs & Root port as PCI Express 0/1/2 RTD3.
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ SA_PCIE_RTD3_GPIO SaRtd3Pcie0Gpio; ///< Offset 28 RTD3 GPIOs used for PCIe0
+ SA_PCIE_RTD3_GPIO SaRtd3Pcie1Gpio; ///< Offset 52 RTD3 GPIOs used for PCIe1
+ SA_PCIE_RTD3_GPIO SaRtd3Pcie2Gpio; ///< Offset 76 RTD3 GPIOs used for PCIe2
+ UINT8 RootPortIndex; ///< Offset 124 Root Port Index number used for SG
+ UINT8 Rsvd0[3]; ///< Offset 125 Reserved for DWORD Alignment
+} SWITCHABLE_GRAPHICS_CONFIG;
+#pragma pack(pop)
+#endif // _SWITCHABLE_GRAPHICS_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VbiosDxeConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VbiosDxeConfig.h
new file mode 100644
index 0000000000..690ad8630a
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VbiosDxeConfig.h
@@ -0,0 +1,39 @@
+/** @file
+ VBIOS DXE policy definitions
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _VBIOS_DXE_CONFIG_H_
+#define _VBIOS_DXE_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#define VBIOS_DXE_CONFIG_REVISION 1
+
+/**
+ This data structure includes Switchable Graphics VBIOS configuration.
+ If Switchable Graphics/Hybrid Gfaphics feature is not supported, all the policies in this configuration block can be ignored.
+ The data elements should be initialized by a Platform Module.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 LoadVbios : 1; ///< Offset 28:0 :This field is used to describe if the dGPU VBIOS needs to be loaded: <b>0=Not load</b>, 1=Load
+ UINT8 ExecuteVbios : 1; ///< Offset 28:1 :This field is used to describe if the dGPU VBIOS need to be executed: <b>0=Not execute</b>, 1=Execute
+/**
+ Offset 28:2 :
+ This field is used to identify the source location of dGPU VBIOS\n
+ <b>1 = secondary display device VBIOS Source is PCI Card</b>\n
+ 0 = secondary display device VBIOS Source is FW Volume\n
+**/
+ UINT8 VbiosSource : 1;
+ UINT8 RsvdBits0 : 5; ///< Offset 28:3 Reserved for future use
+ UINT8 Rsvd[3]; ///< Offset 29 : Reserved for DWORD alignment
+} VBIOS_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _VBIOS_DXE_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VtdConfig.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VtdConfig.h
new file mode 100644
index 0000000000..adde1f836b
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/ConfigBlock/VtdConfig.h
@@ -0,0 +1,42 @@
+/** @file
+ VT-d policy definitions.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _VTD_CONFIG_H_
+#define _VTD_CONFIG_H_
+
+#pragma pack(push, 1)
+
+#define VTD_CONFIG_REVISION 2
+
+/**
+ The data elements should be initialized by a Platform Module.
+ The data structure is for VT-d driver initialization\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Add DMA_CONTROL_GUARANTEE bit in the DMAR table
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28:0 :
+ VT-D Support can be verified by reading CAP ID register as expalined in BIOS Spec.
+ This policy is for debug purpose only.
+ If VT-D is not supported, all other policies in this config block will be ignored.
+ <b>0 = To use Vt-d</b>;
+ 1 = Avoids programming Vtd bars, Vtd overrides and DMAR table.
+ **/
+ UINT32 VtdDisable : 1;
+ UINT32 X2ApicOptOut : 1; ///< Offset 28:1 :This field is used to enable the X2APIC_OPT_OUT bit in the DMAR table. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT32 DmaControlGuarantee : 1; ///< Offset 28:2 :This field is used to enable the DMA_CONTROL_GUARANTEE bit in the DMAR table. 1=Enable/Set and <b>0=Disable/Clear</b>
+ UINT32 RsvdBits0 : 29; ///< Offset 28:3 :Reserved bits for future use
+ UINT32 BaseAddress[SA_VTD_ENGINE_NUMBER]; ///< Offset 32: This field is used to describe the base addresses for VT-d function: <b>BaseAddress[0]=0xFED90000, BaseAddress[1]=0xFED92000, BaseAddress[2]=0xFED91000 </b>
+} VTD_CONFIG;
+#pragma pack(pop)
+
+#endif // _VTD_CONFIG_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/DmaRemappingTable.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/DmaRemappingTable.h
new file mode 100644
index 0000000000..a1d88cb5a2
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/DmaRemappingTable.h
@@ -0,0 +1,77 @@
+/** @file
+ This code defines ACPI DMA Remapping table related definitions.
+ See the System Agent BIOS specification for definition of the table.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _DMA_REMAPPING_TABLE_H_
+#define _DMA_REMAPPING_TABLE_H_
+
+#include <Uefi.h>
+#include <Base.h>
+#include <IndustryStandard/DmaRemappingReportingTable.h>
+#include <IndustryStandard/Acpi.h>
+
+#pragma pack(1)
+///
+/// DMAR table signature
+///
+#define EFI_ACPI_VTD_DMAR_TABLE_SIGNATURE 0x52414D44 ///< "DMAR"
+#define EFI_ACPI_DMAR_TABLE_REVISION 1
+#define EFI_ACPI_DRHD_ENGINE_HEADER_LENGTH 0x10
+#define EFI_ACPI_RMRR_HEADER_LENGTH 0x18
+#define MAX_PCI_DEPTH 5
+
+typedef struct {
+ EFI_ACPI_DMAR_DEVICE_SCOPE_STRUCTURE_HEADER DeviceScopeStructureHeader;
+ EFI_ACPI_DMAR_PCI_PATH PciPath; // device, function
+} EFI_ACPI_DEV_SCOPE_STRUCTURE;
+
+typedef struct {
+ EFI_ACPI_DMAR_DRHD_HEADER DrhdHeader;
+ EFI_ACPI_DEV_SCOPE_STRUCTURE DeviceScope[1];
+} EFI_ACPI_DRHD_ENGINE1_STRUCT;
+
+typedef struct {
+ EFI_ACPI_DMAR_DRHD_HEADER DrhdHeader;
+ //
+ // @todo use PCD
+ //
+ EFI_ACPI_DEV_SCOPE_STRUCTURE DeviceScope[2];
+} EFI_ACPI_DRHD_ENGINE3_STRUCT;
+
+typedef struct {
+ EFI_ACPI_DMAR_RMRR_HEADER RmrrHeader;
+ EFI_ACPI_DEV_SCOPE_STRUCTURE DeviceScope[2];
+} EFI_ACPI_RMRR_USB_STRUC;
+
+typedef struct {
+ EFI_ACPI_DMAR_RMRR_HEADER RmrrHeader;
+ EFI_ACPI_DEV_SCOPE_STRUCTURE DeviceScope[1]; // IGD
+} EFI_ACPI_RMRR_IGD_STRUC;
+
+typedef struct {
+ EFI_ACPI_DMAR_RMRR_HEADER RmrrHeader;
+ EFI_ACPI_DEV_SCOPE_STRUCTURE DeviceScope[1]; // CSME
+} EFI_ACPI_RMRR_CSME_STRUC;
+
+typedef struct {
+ EFI_ACPI_DMAR_ANDD_HEADER AnddHeader;
+ UINT8 AcpiObjectName[20];
+} EFI_ACPI_ANDD_STRUC;
+
+typedef struct {
+ EFI_ACPI_DMAR_HEADER DmarHeader;
+ EFI_ACPI_DRHD_ENGINE1_STRUCT DrhdEngine1;
+ EFI_ACPI_DRHD_ENGINE3_STRUCT DrhdEngine3;
+ EFI_ACPI_RMRR_USB_STRUC RmrrUsb;
+ EFI_ACPI_RMRR_IGD_STRUC RmrrIgd;
+ EFI_ACPI_RMRR_CSME_STRUC RmrrCsme;
+} EFI_ACPI_DMAR_TABLE;
+
+#pragma pack()
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/DxeSaPolicyLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/DxeSaPolicyLib.h
new file mode 100644
index 0000000000..663b0f2202
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/DxeSaPolicyLib.h
@@ -0,0 +1,60 @@
+/** @file
+ Prototype of the DxeSaPolicyLib library.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _DXE_SA_POLICY_LIB_H_
+#define _DXE_SA_POLICY_LIB_H_
+
+#include <Protocol/SaPolicy.h>
+
+/**
+ This function prints the DXE phase policy.
+
+ @param[in] SaPolicy - SA DXE Policy protocol
+**/
+VOID
+SaPrintPolicyProtocol (
+ IN SA_POLICY_PROTOCOL *SaPolicy
+ )
+;
+
+/**
+ CreateSaDxeConfigBlocks generates the config blocksg of SA DXE Policy.
+ It allocates and zero out buffer, and fills in the Intel default settings.
+
+ @param[out] SaPolicy The pointer to get SA Policy Protocol instance
+
+ @retval EFI_SUCCESS The policy default is initialized.
+ @retval EFI_OUT_OF_RESOURCES Insufficient resources to create buffer
+**/
+EFI_STATUS
+EFIAPI
+CreateSaDxeConfigBlocks(
+ IN OUT SA_POLICY_PROTOCOL **SaPolicy
+);
+
+/**
+ SaInstallPolicyProtocol installs SA Policy.
+ While installed, RC assumes the Policy is ready and finalized. So please update and override
+ any setting before calling this function.
+
+ @param[in] ImageHandle Image handle of this driver.
+ @param[in] SaPolicy The pointer to SA Policy Protocol instance
+
+ @retval EFI_SUCCESS The policy is installed.
+ @retval EFI_OUT_OF_RESOURCES Insufficient resources to create buffer
+
+**/
+EFI_STATUS
+EFIAPI
+SaInstallPolicyProtocol (
+ IN EFI_HANDLE ImageHandle,
+ IN SA_POLICY_PROTOCOL *SaPolicy
+ )
+;
+
+#endif // _DXE_SA_POLICY_LIB_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/PeiSaPolicyLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/PeiSaPolicyLib.h
new file mode 100644
index 0000000000..c29d67a305
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/PeiSaPolicyLib.h
@@ -0,0 +1,87 @@
+/** @file
+ Prototype of the PeiSaPolicy library.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _PEI_SA_POLICY_LIB_H_
+#define _PEI_SA_POLICY_LIB_H_
+
+#include <Ppi/SiPolicy.h>
+#include <Library/ConfigBlockLib.h>
+
+/**
+ This function prints the PEI phase PreMem policy.
+
+ @param[in] SiPolicyPreMemPpi The RC PreMem Policy PPI instance
+**/
+VOID
+EFIAPI
+SaPrintPolicyPpiPreMem (
+ IN SI_PREMEM_POLICY_PPI *SiPolicyPreMemPpi
+ );
+
+/**
+ This function prints the PEI phase policy.
+
+ @param[in] SiPolicyPpi The RC Policy PPI instance
+**/
+VOID
+EFIAPI
+SaPrintPolicyPpi (
+ IN SI_POLICY_PPI *SiPolicyPpi
+ );
+
+/**
+ Get SA config block table total size.
+
+ @retval Size of SA config block table
+**/
+UINT16
+EFIAPI
+SaGetConfigBlockTotalSize (
+ VOID
+ );
+
+/**
+ Get SA config block table total size.
+
+ @retval Size of SA config block table
+**/
+UINT16
+EFIAPI
+SaGetConfigBlockTotalSizePreMem (
+ VOID
+ );
+
+/**
+ SaAddConfigBlocksPreMem add all SA config blocks.
+
+ @param[in] ConfigBlockTableAddress The pointer to add SA config blocks
+
+ @retval EFI_SUCCESS The policy default is initialized.
+ @retval EFI_OUT_OF_RESOURCES Insufficient resources to create buffer
+**/
+EFI_STATUS
+EFIAPI
+SaAddConfigBlocksPreMem (
+ IN VOID *ConfigBlockTableAddress
+ );
+
+/**
+ SaAddConfigBlocks add all SA config blocks.
+
+ @param[in] ConfigBlockTableAddress The pointer to add SA config blocks
+
+ @retval EFI_SUCCESS The policy default is initialized.
+ @retval EFI_OUT_OF_RESOURCES Insufficient resources to create buffer
+**/
+EFI_STATUS
+EFIAPI
+SaAddConfigBlocks (
+ IN VOID *ConfigBlockTableAddress
+ );
+
+#endif // _PEI_SA_POLICY_LIBRARY_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/SaPlatformLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/SaPlatformLib.h
new file mode 100644
index 0000000000..a1289abe81
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Library/SaPlatformLib.h
@@ -0,0 +1,88 @@
+/** @file
+ Header file for SaPlatformLib.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_PLATFORM_LIB_H_
+#define _SA_PLATFORM_LIB_H_
+
+#include <SaAccess.h>
+#include <CpuAccess.h>
+
+/**
+ Determine if PCH Link is DMI/OPI
+
+ @param[in] CpuModel CPU model
+
+ @retval TRUE DMI
+ @retval FALSE OPI
+**/
+BOOLEAN
+IsPchLinkDmi (
+ IN CPU_FAMILY CpuModel
+ );
+
+/**
+ Returns the number of DMI lanes for current CPU
+
+ @retval UINT8
+**/
+UINT8
+GetMaxDmiLanes (
+ );
+
+
+/**
+ Returns the number of DMI bundles for current CPU
+
+ @retval UINT8
+**/
+UINT8
+GetMaxDmiBundles (
+ );
+
+
+/**
+ Returns the function numbers for current CPU
+
+ @retval UINT8
+**/
+UINT8
+GetMaxPegFuncs (
+ );
+
+
+/**
+ Returns the number of DMI lanes for current CPU
+
+ @retval UINT8
+**/
+UINT8
+GetMaxPegLanes (
+ );
+
+
+/**
+ Returns the number of DMI bundles for current CPU
+
+ @retval UINT8
+**/
+UINT8
+GetMaxPegBundles (
+ );
+
+/**
+ Checks if PEG port is present
+
+ @retval TRUE PEG is presented
+ @retval FALSE PEG is not presented
+**/
+BOOLEAN
+IsPegPresent (
+ VOID
+ );
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/MemInfoHob.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/MemInfoHob.h
new file mode 100644
index 0000000000..da285bbcba
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/MemInfoHob.h
@@ -0,0 +1,259 @@
+/** @file
+ This file contains definitions required for creation of
+ Memory S3 Save data, Memory Info data and Memory Platform
+ data hobs.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _MEM_INFO_HOB_H_
+#define _MEM_INFO_HOB_H_
+
+#include <Uefi/UefiMultiPhase.h>
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#pragma pack (push, 1)
+
+extern EFI_GUID gSiMemoryS3DataGuid;
+extern EFI_GUID gSiMemoryInfoDataGuid;
+extern EFI_GUID gSiMemoryPlatformDataGuid;
+
+#define MAX_NODE 1
+#define MAX_CH 2
+#define MAX_DIMM 2
+
+///
+/// Host reset states from MRC.
+///
+#define WARM_BOOT 2
+
+#define R_MC_CHNL_RANK_PRESENT 0x7C
+#define B_RANK0_PRS BIT0
+#define B_RANK1_PRS BIT1
+#define B_RANK2_PRS BIT4
+#define B_RANK3_PRS BIT5
+
+///
+/// Defines taken from MRC so avoid having to include MrcInterface.h
+///
+
+//
+// Matches MAX_SPD_SAVE define in MRC
+//
+#ifndef MAX_SPD_SAVE
+#define MAX_SPD_SAVE 29
+#endif
+
+//
+// MRC version description.
+//
+typedef struct {
+ UINT8 Major; ///< Major version number
+ UINT8 Minor; ///< Minor version number
+ UINT8 Rev; ///< Revision number
+ UINT8 Build; ///< Build number
+} SiMrcVersion;
+
+//
+// Matches MrcChannelSts enum in MRC
+//
+#ifndef CHANNEL_NOT_PRESENT
+#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller.
+#endif
+#ifndef CHANNEL_DISABLED
+#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled.
+#endif
+#ifndef CHANNEL_PRESENT
+#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled.
+#endif
+
+//
+// Matches MrcDimmSts enum in MRC
+//
+#ifndef DIMM_ENABLED
+#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected.
+#endif
+#ifndef DIMM_DISABLED
+#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence.
+#endif
+#ifndef DIMM_PRESENT
+#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used.
+#endif
+#ifndef DIMM_NOT_PRESENT
+#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair.
+#endif
+
+//
+// Matches MrcBootMode enum in MRC
+//
+#ifndef bmCold
+#define bmCold 0 // Cold boot
+#endif
+#ifndef bmWarm
+#define bmWarm 1 // Warm boot
+#endif
+#ifndef bmS3
+#define bmS3 2 // S3 resume
+#endif
+#ifndef bmFast
+#define bmFast 3 // Fast boot
+#endif
+
+//
+// Matches MrcDdrType enum in MRC
+//
+#ifndef MRC_DDR_TYPE_DDR4
+#define MRC_DDR_TYPE_DDR4 0
+#endif
+#ifndef MRC_DDR_TYPE_DDR3
+#define MRC_DDR_TYPE_DDR3 1
+#endif
+#ifndef MRC_DDR_TYPE_LPDDR3
+#define MRC_DDR_TYPE_LPDDR3 2
+#endif
+#ifndef MRC_DDR_TYPE_UNKNOWN
+#define MRC_DDR_TYPE_UNKNOWN 3
+#endif
+
+#define MAX_PROFILE_NUM 4 // number of memory profiles supported
+#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported
+
+//
+// DIMM timings
+//
+typedef struct {
+ UINT32 tCK; ///< Memory cycle time, in femtoseconds.
+ UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode.
+ UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency.
+ UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time.
+ UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
+ UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
+ UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time.
+ UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
+ UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time.
+ UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks.
+ UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time.
+ UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups.
+ UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups.
+ UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time.
+ UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time.
+ UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
+ UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
+ UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
+ UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group.
+} MRC_CH_TIMING;
+
+typedef struct {
+ UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group.
+ UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups.
+ UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM).
+ UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs.
+} MRC_TA_TIMING;
+
+///
+/// Memory SMBIOS & OC Memory Data Hob
+///
+typedef struct {
+ UINT8 Status; ///< See MrcDimmStatus for the definition of this field.
+ UINT8 DimmId;
+ UINT32 DimmCapacity; ///< DIMM size in MBytes.
+ UINT16 MfgId;
+ UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes
+ UINT8 RankInDimm; ///< The number of ranks in this DIMM.
+ UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation.
+ UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation.
+ UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation.
+ UINT16 Speed; ///< The maximum capable speed of the device, in MHz.
+} DIMM_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this channel should be used.
+ UINT8 ChannelId;
+ UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel.
+ MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values.
+ DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics.
+ MRC_TA_TIMING tRd2Rd; ///< Read-to-Read Turn Around Timings
+ MRC_TA_TIMING tRd2Wr; ///< Read-to-Write Turn Around Timings
+ MRC_TA_TIMING tWr2Rd; ///< Write-to-Read Turn Around Timings
+ MRC_TA_TIMING tWr2Wr; ///< Write-to-Write Turn Around Timings
+} CHANNEL_INFO;
+
+typedef struct {
+ UINT8 Status; ///< Indicates whether this controller should be used.
+ UINT16 DeviceId; ///< The PCI device id of this memory controller.
+ UINT8 RevisionId; ///< The PCI revision id of this memory controller.
+ UINT8 ChannelCount; ///< Number of valid channels that exist on the controller.
+ CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions.
+ MRC_TA_TIMING tRd2Rd; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Read Turn Around Timings
+ MRC_TA_TIMING tRd2Wr; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Write Turn Around Timings
+ MRC_TA_TIMING tWr2Rd; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Read Turn Around Timings
+ MRC_TA_TIMING tWr2Wr; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Write Turn Around Timings
+} CONTROLLER_INFO;
+
+typedef struct {
+ UINT8 Revision;
+ UINT16 DataWidth; ///< Data width, in bits, of this memory device
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.18.2 and Table 75
+ **/
+ UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3
+ UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz)
+ UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz)
+ /** As defined in SMBIOS 3.0 spec
+ Section 7.17.3 and Table 72
+ **/
+ UINT8 ErrorCorrectionType;
+
+ SiMrcVersion Version;
+ BOOLEAN EccSupport;
+ UINT8 MemoryProfile;
+ UINT32 TotalPhysicalMemorySize;
+ UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist.
+ UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs.
+ UINT8 Ratio;
+ UINT8 RefClk;
+ UINT32 VddVoltage[MAX_PROFILE_NUM];
+ CONTROLLER_INFO Controller[MAX_NODE];
+} MEMORY_INFO_DATA_HOB;
+
+/**
+ Memory Platform Data Hob
+
+ <b>Revision 1:</b>
+ - Initial version.
+ <b>Revision 2:</b>
+ - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields
+**/
+typedef struct {
+ UINT8 Revision;
+ UINT8 Reserved[3];
+ UINT32 BootMode;
+ UINT32 TsegSize;
+ UINT32 TsegBase;
+ UINT32 PrmrrSize;
+ UINT32 PrmrrBase;
+ UINT32 GttBase;
+ UINT32 MmioSize;
+ UINT32 PciEBaseAddress;
+ UINT32 GdxcIotBase;
+ UINT32 GdxcIotSize;
+ UINT32 GdxcMotBase;
+ UINT32 GdxcMotSize;
+} MEMORY_PLATFORM_DATA;
+
+typedef struct {
+ EFI_HOB_GUID_TYPE EfiHobGuidType;
+ MEMORY_PLATFORM_DATA Data;
+ UINT8 *Buffer;
+} MEMORY_PLATFORM_DATA_HOB;
+
+#pragma pack (pop)
+
+#endif // _MEM_INFO_HOB_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/GraphicsInitLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/GraphicsInitLib.h
new file mode 100644
index 0000000000..ff7cfa838f
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/GraphicsInitLib.h
@@ -0,0 +1,15 @@
+/** @file
+ Graphics header file
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GRAPHICS_INIT_H_
+#define _GRAPHICS_INIT_H_
+
+#include <SaPolicyCommon.h>
+#include <Ppi/SiPolicy.h>
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/LegacyRegion.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/LegacyRegion.h
new file mode 100644
index 0000000000..497c860824
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/LegacyRegion.h
@@ -0,0 +1,33 @@
+/** @file
+ This code supports a private implementation of the Legacy Region protocol.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _LEGACY_REGION_H_
+#define _LEGACY_REGION_H_
+
+#include <Uefi.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/DebugLib.h>
+#include <Protocol/LegacyRegion2.h>
+#include <Protocol/PciRootBridgeIo.h>
+#include <Protocol/Cpu.h>
+#include <IndustryStandard/Pci22.h>
+#include <SaAccess.h>
+
+/**
+ Install Driver to produce Legacy Region protocol.
+
+ @param[in] ImageHandle Handle for the image of this driver
+
+ @retval EFI_SUCCESS - Legacy Region protocol installed
+ @retval Other - No protocol installed, unload driver.
+**/
+EFI_STATUS
+LegacyRegionInstall (
+ IN EFI_HANDLE ImageHandle
+ );
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/PeiCpuTraceHubLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/PeiCpuTraceHubLib.h
new file mode 100644
index 0000000000..8bf46528ab
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/PeiCpuTraceHubLib.h
@@ -0,0 +1,23 @@
+/** @file
+ Header file for North TraceHub Lib.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _NORTH_TRACEHUB_LIB_H_
+#define _NORTH_TRACEHUB_LIB_H_
+
+#include <SaPolicyCommon.h>
+#include <SaAccess.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/PciSegmentLib.h>
+#include <IndustryStandard/Pci.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/CpuPlatformLib.h>
+#include <Library/MtrrLib.h>
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/SaPcieLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/SaPcieLib.h
new file mode 100644
index 0000000000..19dd634a35
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Library/SaPcieLib.h
@@ -0,0 +1,70 @@
+/** @file
+ Defines and prototypes for the System Agent PCIe library module
+ This library is expected to share between DXE and SMM drivers.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_PCIE_LIB_H_
+#define _SA_PCIE_LIB_H_
+
+#include <Library/S3BootScriptLib.h>
+#include <Protocol/SaPolicy.h>
+
+#define MAX_SUPPORTED_ROOT_BRIDGE_NUMBER 3
+#define MAX_SUPPORTED_DEVICE_NUMBER 192
+
+/**
+ Enumerate all end point devices connected to root bridge ports and record their MMIO base address
+
+ @exception EFI_UNSUPPORTED PCIe capability structure not found
+ @retval EFI_SUCCESS All done successfully
+**/
+EFI_STATUS
+EnumerateAllPcieDevices (
+ VOID
+ );
+
+/**
+ Sets Common Clock, TCx-VC0 mapping, and Max Payload for PCIe
+**/
+VOID
+SaPcieConfigBeforeOpRom (
+ VOID
+ );
+
+/**
+ This function does all SA ASPM initialization
+**/
+VOID
+SaAspm (
+ VOID
+ );
+
+/**
+ This function checks PEG end point device for extended tag capability and enables them if they are.
+**/
+VOID
+EnableExtendedTag (
+ VOID
+ );
+
+/**
+ This function handles SA S3 resume
+**/
+VOID
+SaS3Resume (
+ VOID
+ );
+
+/**
+ Wrapper function for all SA S3 resume tasks which can be a callback function.
+**/
+VOID
+SaS3ResumeCallback (
+ VOID
+ );
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaIotrapSmi.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaIotrapSmi.h
new file mode 100644
index 0000000000..2c765b09b8
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaIotrapSmi.h
@@ -0,0 +1,36 @@
+/** @file
+ This file defines the SA Iotrap SMI Protocol to provide the
+ I/O address for registered Iotrap SMI.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_IOTRAP_SMI_PROTOCOL_H_
+#define _SA_IOTRAP_SMI_PROTOCOL_H_
+
+//
+// Extern the GUID for protocol users.
+//
+extern EFI_GUID gSaIotrapSmiProtocolGuid;
+
+#define SA_IOTRAP_SMI_PROTOCOL_REVISION_1 1
+
+//
+// SA IO Trap SMI Protocol definition (Private protocol for RC internal use only)
+//
+typedef struct {
+/*
+ Protocol revision number
+ Any backwards compatible changes to this protocol will result in an update in the revision number
+ Major changes will require publication of a new protocol
+
+ <b>Revision 1</b>:
+ - First version
+*/
+ UINT8 Revision;
+ UINT16 SaIotrapSmiAddress;
+} SA_IOTRAP_SMI_PROTOCOL;
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaNvsArea.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaNvsArea.h
new file mode 100644
index 0000000000..1bae2d95e5
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/Protocol/SaNvsArea.h
@@ -0,0 +1,31 @@
+/** @file
+ Definition of the System Agent global NVS area protocol.
+ This protocol publishes the address and format of a global ACPI NVS buffer
+ used as a communications buffer between SMM/DXE/PEI code and ASL code.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SYSTEM_AGENT_NVS_AREA_H_
+#define _SYSTEM_AGENT_NVS_AREA_H_
+
+//
+// SA NVS Area definition
+//
+#include <Private/SaNvsAreaDef.h>
+
+//
+// Extern the GUID for protocol users.
+//
+extern EFI_GUID gSaNvsAreaProtocolGuid;
+
+///
+/// System Agent Global NVS Area Protocol
+///
+typedef struct {
+ SYSTEM_AGENT_NVS_AREA *Area; ///< System Agent Global NVS Area Structure
+} SYSTEM_AGENT_NVS_AREA_PROTOCOL;
+
+#endif // _SYSTEM_AGENT_NVS_AREA_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaConfigHob.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaConfigHob.h
new file mode 100644
index 0000000000..f1b72488ca
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaConfigHob.h
@@ -0,0 +1,89 @@
+/** @file
+ The GUID definition for SaConfigHob
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_CONFIG_HOB_H_
+#define _SA_CONFIG_HOB_H_
+
+#include <SaAccess.h>
+#include <Base.h>
+
+extern EFI_GUID gSaConfigHobGuid;
+
+#pragma pack (push,1)
+///
+#define DPR_DIRECTORY_MAX 2 ///< DPR Maximum Size
+/// DPR directory entry definition
+///
+typedef struct {
+ UINT8 Type; ///< DPR Directory Type
+ UINT8 Size; ///< DPR Size in MB
+ UINT32 PhysBase; ///< Must be 4K aligned (bits 11..0 must be clear)
+ UINT16 Reserved; ///< Must be 0
+} DPR_DIRECTORY_ENTRY;
+
+///
+/// The data elements should be initialized by a Platform Module.
+/// The data structure is for VT-d driver initialization
+///
+typedef struct {
+ BOOLEAN VtdDisable; ///< 1 = Avoids programming Vtd bars, Vtd overrides and DMAR table
+ UINT32 BaseAddress[SA_VTD_ENGINE_NUMBER]; ///< This field is used to describe the base addresses for VT-d function
+ BOOLEAN X2ApicOptOut; ///< This field is used to enable the X2APIC_OPT_OUT bit in the DMAR table. <b>1=Enable/Set</b> and 0=Disable/Clear
+ BOOLEAN InterruptRemappingSupport; ///< This field is used to indicate Interrupt Remapping supported or not
+} SA_VTD_CONFIGURATION_HOB;
+
+///
+/// SA GPIO Data Structure
+///
+typedef struct {
+ UINT8 ExpanderNo; ///< =Expander No For I2C based GPIO
+ UINT32 GpioNo; ///< GPIO pad
+ BOOLEAN Active; ///< 0=Active Low; 1=Active High
+} SA_GPIO;
+
+///
+/// SA PCIE RTD3 GPIO Data Structure
+///
+typedef struct {
+ UINT8 GpioSupport; ///< 0=Not Supported; 1=PCH based; 2=I2C Based
+ SA_GPIO HoldRst; ///< Offset 8 This field contain PCIe HLD RESET GPIO value and level information
+ SA_GPIO PwrEnable; ///< This field contain PCIe PWR Enable GPIO value and level information
+ UINT32 WakeGpioNo; ///< This field contain PCIe RTD3 Device Wake GPIO number
+} PCIE_RTD3_GPIO;
+
+///
+/// SG Info HOB
+///
+typedef struct {
+ SG_MODE SgMode;
+ UINT8 RootPortIndex;
+ PCIE_RTD3_GPIO Rtd3Pcie0Gpio;
+ PCIE_RTD3_GPIO Rtd3Pcie1Gpio;
+ PCIE_RTD3_GPIO Rtd3Pcie2Gpio;
+ UINT16 DelayAfterPwrEn;
+ UINT16 DelayAfterHoldReset;
+} SA_RTD3;
+
+///
+/// System Agent Config Hob
+///
+typedef struct {
+ EFI_HOB_GUID_TYPE EfiHobGuidType; ///< GUID Hob type structure for gSaConfigHobGuid
+ DPR_DIRECTORY_ENTRY DprDirectory[DPR_DIRECTORY_MAX]; ///< DPR directory entry definition
+ BOOLEAN InitPcieAspmAfterOprom; ///< 1=initialize PCIe ASPM after Oprom; 0=before (This will be set basing on policy)
+ SA_RTD3 SaRtd3; ///< SG Info HOB
+ UINT8 ApertureSize; ///< Aperture size value
+ UINT8 IpuAcpiMode; ///< IPU ACPI mode: 0=Disabled, 1=IGFX Child device, 2=ACPI device
+ SA_VTD_CONFIGURATION_HOB VtdData; ///< VT-d Data HOB
+ BOOLEAN CridEnable; ///< This field inidicates if CRID is enabled or disabled (to support Intel(R) SIPP)
+ BOOLEAN SkipPamLock; ///< 0=All PAM registers will be locked in System Agent code, 1=Do not lock PAM registers in System Agent code.
+ UINT8 PowerDownUnusedBundles[SA_PEG_MAX_FUN]; ///< PCIe power down unused bundles support
+ UINT8 PegMaxPayload[SA_PEG_MAX_FUN]; ///< PEG Max Pay Load Size (0xFF: Auto, 0:128B, 1:256B)
+} SA_CONFIG_HOB;
+#pragma pack (pop)
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaNvsAreaDef.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaNvsAreaDef.h
new file mode 100644
index 0000000000..095942d483
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Private/SaNvsAreaDef.h
@@ -0,0 +1,151 @@
+/** @file
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+ //
+ // Define SA NVS Area operatino region.
+ //
+
+#ifndef _SA_NVS_AREA_DEF_H_
+#define _SA_NVS_AREA_DEF_H_
+
+#pragma pack (push,1)
+typedef struct {
+ UINT32 IgdOpRegionAddress; ///< Offset 0 IGD OpRegion base address
+ UINT8 GfxTurboIMON; ///< Offset 4 IMON Current Value
+ UINT8 IgdState; ///< Offset 5 IGD State (Primary Display = 1)
+ UINT8 IgdBootType; ///< Offset 6 IGD Boot Display Device
+ UINT8 IgdPanelType; ///< Offset 7 IGD Panel Type CMOS option
+ UINT8 IgdPanelScaling; ///< Offset 8 IGD Panel Scaling
+ UINT8 IgdBiaConfig; ///< Offset 9 IGD BIA Configuration
+ UINT8 IgdSscConfig; ///< Offset 10 IGD SSC Configuration
+ UINT8 IgdDvmtMemSize; ///< Offset 11 IGD DVMT Memory Size
+ UINT8 IgdFunc1Enable; ///< Offset 12 IGD Function 1 Enable
+ UINT8 IgdHpllVco; ///< Offset 13 HPLL VCO
+ UINT8 IgdSciSmiMode; ///< Offset 14 GMCH SMI/SCI mode (0=SCI)
+ UINT8 IgdPAVP; ///< Offset 15 IGD PAVP data
+ UINT8 CurrentDeviceList; ///< Offset 16 Current Attached Device List
+ UINT16 CurrentDisplayState; ///< Offset 17 Current Display State
+ UINT16 NextDisplayState; ///< Offset 19 Next Display State
+ UINT8 NumberOfValidDeviceId; ///< Offset 21 Number of Valid Device IDs
+ UINT32 DeviceId1; ///< Offset 22 Device ID 1
+ UINT32 DeviceId2; ///< Offset 26 Device ID 2
+ UINT32 DeviceId3; ///< Offset 30 Device ID 3
+ UINT32 DeviceId4; ///< Offset 34 Device ID 4
+ UINT32 DeviceId5; ///< Offset 38 Device ID 5
+ UINT32 DeviceId6; ///< Offset 42 Device ID 6
+ UINT32 DeviceId7; ///< Offset 46 Device ID 7
+ UINT32 DeviceId8; ///< Offset 50 Device ID 8
+ UINT32 DeviceId9; ///< Offset 54 Device ID 9
+ UINT32 DeviceId10; ///< Offset 58 Device ID 10
+ UINT32 DeviceId11; ///< Offset 62 Device ID 11
+ UINT32 DeviceId12; ///< Offset 66 Device ID 12
+ UINT32 DeviceId13; ///< Offset 70 Device ID 13
+ UINT32 DeviceId14; ///< Offset 74 Device ID 14
+ UINT32 DeviceId15; ///< Offset 78 Device ID 15
+ UINT32 DeviceIdX; ///< Offset 82 Device ID for eDP device
+ UINT32 NextStateDid1; ///< Offset 86 Next state DID1 for _DGS
+ UINT32 NextStateDid2; ///< Offset 90 Next state DID2 for _DGS
+ UINT32 NextStateDid3; ///< Offset 94 Next state DID3 for _DGS
+ UINT32 NextStateDid4; ///< Offset 98 Next state DID4 for _DGS
+ UINT32 NextStateDid5; ///< Offset 102 Next state DID5 for _DGS
+ UINT32 NextStateDid6; ///< Offset 106 Next state DID6 for _DGS
+ UINT32 NextStateDid7; ///< Offset 110 Next state DID7 for _DGS
+ UINT32 NextStateDid8; ///< Offset 114 Next state DID8 for _DGS
+ UINT32 NextStateDidEdp; ///< Offset 118 Next state DID for eDP
+ UINT8 LidState; ///< Offset 122 Lid State (Lid Open = 1)
+ UINT32 AKsv0; ///< Offset 123 First four bytes of AKSV (manufacturing mode)
+ UINT8 AKsv1; ///< Offset 127 Fifth byte of AKSV (manufacturing mode)
+ UINT8 BrightnessPercentage; ///< Offset 128 Brightness Level Percentage
+ UINT8 AlsEnable; ///< Offset 129 Ambient Light Sensor Enable
+ UINT8 AlsAdjustmentFactor; ///< Offset 130 Ambient Light Adjusment Factor
+ UINT8 LuxLowValue; ///< Offset 131 LUX Low Value
+ UINT8 LuxHighValue; ///< Offset 132 LUX High Value
+ UINT8 ActiveLFP; ///< Offset 133 Active LFP
+ UINT8 IpuAcpiMode; ///< Offset 134 IPU ACPI device type (0=Disabled, 1=AVStream virtual device as child of GFX)
+ UINT8 EdpValid; ///< Offset 135 Check for eDP display device
+ UINT8 SgMode; ///< Offset 136 SG Mode (0=Disabled, 1=SG Muxed, 2=SG Muxless, 3=DGPU Only)
+ UINT8 SgFeatureList; ///< Offset 137 SG Feature List
+ UINT8 Pcie0GpioSupport; ///< Offset 138 PCIe0 GPIO Support (0=Disabled, 1=PCH Based, 2=I2C Based)
+ UINT8 Pcie0HoldRstExpanderNo; ///< Offset 139 PCIe0 HLD RST IO Expander Number
+ UINT32 Pcie0HoldRstGpioNo; ///< Offset 140 PCIe0 HLD RST GPIO Number
+ UINT8 Pcie0HoldRstActiveInfo; ///< Offset 144 PCIe0 HLD RST GPIO Active Information
+ UINT8 Pcie0PwrEnExpanderNo; ///< Offset 145 PCIe0 PWR Enable IO Expander Number
+ UINT32 Pcie0PwrEnGpioNo; ///< Offset 146 PCIe0 PWR Enable GPIO Number
+ UINT8 Pcie0PwrEnActiveInfo; ///< Offset 150 PCIe0 PWR Enable GPIO Active Information
+ UINT8 Pcie1GpioSupport; ///< Offset 151 PCIe1 GPIO Support (0=Disabled, 1=PCH Based, 2=I2C Based)
+ UINT8 Pcie1HoldRstExpanderNo; ///< Offset 152 PCIe1 HLD RST IO Expander Number
+ UINT32 Pcie1HoldRstGpioNo; ///< Offset 153 PCIe1 HLD RST GPIO Number
+ UINT8 Pcie1HoldRstActiveInfo; ///< Offset 157 PCIe1 HLD RST GPIO Active Information
+ UINT8 Pcie1PwrEnExpanderNo; ///< Offset 158 PCIe1 PWR Enable IO Expander Number
+ UINT32 Pcie1PwrEnGpioNo; ///< Offset 159 PCIe1 PWR Enable GPIO Number
+ UINT8 Pcie1PwrEnActiveInfo; ///< Offset 163 PCIe1 PWR Enable GPIO Active Information
+ UINT8 Pcie2GpioSupport; ///< Offset 164 PCIe2 GPIO Support (0=Disabled, 1=PCH Based, 2=I2C Based)
+ UINT8 Pcie2HoldRstExpanderNo; ///< Offset 165 PCIe2 HLD RST IO Expander Number
+ UINT32 Pcie2HoldRstGpioNo; ///< Offset 166 PCIe2 HLD RST GPIO Number
+ UINT8 Pcie2HoldRstActiveInfo; ///< Offset 170 PCIe2 HLD RST GPIO Active Information
+ UINT8 Pcie2PwrEnExpanderNo; ///< Offset 171 PCIe2 PWR Enable IO Expander Number
+ UINT32 Pcie2PwrEnGpioNo; ///< Offset 172 PCIe2 PWR Enable GPIO Number
+ UINT8 Pcie2PwrEnActiveInfo; ///< Offset 176 PCIe2 PWR Enable GPIO Active Information
+ UINT16 DelayAfterPwrEn; ///< Offset 177 Delay after power enable for PCIe
+ UINT16 DelayAfterHoldReset; ///< Offset 179 Delay after Hold Reset for PCIe
+ UINT8 Pcie0EpCapOffset; ///< Offset 181 PCIe0 Endpoint Capability Structure Offset
+ UINT32 XPcieCfgBaseAddress; ///< Offset 182 Any Device's PCIe Config Space Base Address
+ UINT16 GpioBaseAddress; ///< Offset 186 GPIO Base Address
+ UINT32 NvIgOpRegionAddress; ///< Offset 188 NVIG opregion address
+ UINT32 NvHmOpRegionAddress; ///< Offset 192 NVHM opregion address
+ UINT32 ApXmOpRegionAddress; ///< Offset 196 AMDA opregion address
+ UINT8 Peg0LtrEnable; ///< Offset 200 Latency Tolerance Reporting Enable
+ UINT8 Peg0ObffEnable; ///< Offset 201 Optimized Buffer Flush and Fill
+ UINT8 Peg1LtrEnable; ///< Offset 202 Latency Tolerance Reporting Enable
+ UINT8 Peg1ObffEnable; ///< Offset 203 Optimized Buffer Flush and Fill
+ UINT8 Peg2LtrEnable; ///< Offset 204 Latency Tolerance Reporting Enable
+ UINT8 Peg2ObffEnable; ///< Offset 205 Optimized Buffer Flush and Fill
+ UINT8 Peg3LtrEnable; ///< Offset 206 Latency Tolerance Reporting Enable
+ UINT8 Peg3ObffEnable; ///< Offset 207 Optimized Buffer Flush and Fill
+ UINT16 PegLtrMaxSnoopLatency; ///< Offset 208 SA Peg Latency Tolerance Reporting Max Snoop Latency
+ UINT16 PegLtrMaxNoSnoopLatency; ///< Offset 210 SA Peg Latency Tolerance Reporting Max No Snoop Latency
+ UINT8 Peg0PowerDownUnusedBundles; ///< Offset 212 Peg0 Unused Bundle Control
+ UINT8 Peg1PowerDownUnusedBundles; ///< Offset 213 Peg1 Unused Bundle Control
+ UINT8 Peg2PowerDownUnusedBundles; ///< Offset 214 Peg2 Unused Bundle Control
+ UINT8 Peg3PowerDownUnusedBundles; ///< Offset 215 Peg3 Unused Bundle Control
+ UINT8 PackageCstateLimit; ///< Offset 216 The lowest C-state for the package
+ UINT8 PwrDnBundlesGlobalEnable; ///< Offset 217 Pegx Unused Bundle Control Global Enable (0=Disabled, 1=Enabled)
+ UINT64 Mmio64Base; ///< Offset 218 Base of above 4GB MMIO resource
+ UINT64 Mmio64Length; ///< Offset 226 Length of above 4GB MMIO resource
+ UINT32 CpuIdInfo; ///< Offset 234 CPU ID info to get Family Id or Stepping
+ UINT8 Pcie1EpCapOffset; ///< Offset 238 PCIe1 Endpoint Capability Structure Offset
+ UINT8 Pcie2EpCapOffset; ///< Offset 239 PCIe2 Endpoint Capability Structure Offset
+ UINT8 Pcie0SecBusNum; ///< Offset 240 PCIe0 Secondary Bus Number (PCIe0 Endpoint Bus Number)
+ UINT8 Pcie1SecBusNum; ///< Offset 241 PCIe1 Secondary Bus Number (PCIe0 Endpoint Bus Number)
+ UINT8 Pcie2SecBusNum; ///< Offset 242 PCIe2 Secondary Bus Number (PCIe0 Endpoint Bus Number)
+ UINT32 Mmio32Base; ///< Offset 243 Base of below 4GB MMIO resource
+ UINT32 Mmio32Length; ///< Offset 247 Length of below 4GB MMIO resource
+ UINT32 Pcie0WakeGpioNo; ///< Offset 251 PCIe0 RTD3 Device Wake GPIO Number
+ UINT32 Pcie1WakeGpioNo; ///< Offset 255 PCIe1 RTD3 Device Wake GPIO Number
+ UINT32 Pcie2WakeGpioNo; ///< Offset 259 PCIe2 RTD3 Device Wake GPIO Number
+ UINT8 VtdDisable; ///< Offset 263 VT-d Enable/Disable
+ UINT32 VtdBaseAddress1; ///< Offset 264 VT-d Base Address 1
+ UINT32 VtdBaseAddress2; ///< Offset 268 VT-d Base Address 2
+ UINT32 VtdBaseAddress3; ///< Offset 272 VT-d Base Address 3
+ UINT16 VtdEngine1Vid; ///< Offset 276 VT-d Engine#1 Vendor ID
+ UINT16 VtdEngine2Vid; ///< Offset 278 VT-d Engine#2 Vendor ID
+ UINT8 Pcie3SecBusNum; ///< Offset 280 PCIe3 Secondary Bus Number (PCIe3 Endpoint Bus Number)
+ UINT8 Pcie3GpioSupport; ///< Offset 281 PCIe3 GPIO Support (0=Disabled, 1=PCH Based, 2=I2C Based)
+ UINT8 Pcie3HoldRstExpanderNo; ///< Offset 282 PCIe3 HLD RST IO Expander Number
+ UINT32 Pcie3HoldRstGpioNo; ///< Offset 283 PCIe3 HLD RST GPIO Number
+ UINT8 Pcie3HoldRstActiveInfo; ///< Offset 287 PCIe3 HLD RST GPIO Active Information
+ UINT8 Pcie3PwrEnExpanderNo; ///< Offset 288 PCIe3 PWR Enable IO Expander Number
+ UINT32 Pcie3PwrEnGpioNo; ///< Offset 289 PCIe3 PWR Enable GPIO Number
+ UINT8 Pcie3PwrEnActiveInfo; ///< Offset 293 PCIe3 PWR Enable GPIO Active Information
+ UINT32 Pcie3WakeGpioNo; ///< Offset 294 PCIe3 RTD3 Device Wake GPIO Number
+ UINT8 Pcie3EpCapOffset; ///< Offset 298 PCIe3 Endpoint Capability Structure Offset
+ UINT8 RootPortIndex; ///< Offset 299 RootPort Number
+ UINT32 RootPortAddress; ///< Offset 300 RootPortAddress
+ UINT8 Reserved0[196]; ///< Offset 304:499
+} SYSTEM_AGENT_NVS_AREA;
+
+#pragma pack(pop)
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopComponentName2.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopComponentName2.h
new file mode 100644
index 0000000000..a9db25404f
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopComponentName2.h
@@ -0,0 +1,63 @@
+/** @file
+ Protocol to retrieve the GOP driver version
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GOP_COMPONENT_NAME2_H_
+#define _GOP_COMPONENT_NAME2_H_
+
+
+typedef struct _GOP_COMPONENT_NAME2_PROTOCOL GOP_COMPONENT_NAME2_PROTOCOL;
+
+///
+/// GOP Component protocol for retrieving driver name
+///
+typedef
+EFI_STATUS
+(EFIAPI *GOP_COMPONENT_NAME2_GET_DRIVER_NAME) (
+ IN GOP_COMPONENT_NAME2_PROTOCOL * This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+///
+/// GOP Component protocol for retrieving controller name
+///
+typedef
+EFI_STATUS
+(EFIAPI *GOP_COMPONENT_NAME2_GET_CONTROLLER_NAME) (
+ IN GOP_COMPONENT_NAME2_PROTOCOL * This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+///
+/// GOP Component protocol for retrieving driver version
+///
+typedef
+EFI_STATUS
+(EFIAPI *GOP_COMPONENT_NAME2_GET_DRIVER_VERSION) (
+ IN GOP_COMPONENT_NAME2_PROTOCOL * This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverVersion
+ );
+
+/**
+ GOP Component protocol\n
+ This protocol will be installed by GOP driver and can be used to retrieve GOP information.
+**/
+struct _GOP_COMPONENT_NAME2_PROTOCOL {
+ GOP_COMPONENT_NAME2_GET_DRIVER_NAME GetDriverName; ///< Protocol function to get driver name
+ GOP_COMPONENT_NAME2_GET_DRIVER_VERSION GetDriverVersion; ///< Protocol function to get driver version
+ GOP_COMPONENT_NAME2_GET_CONTROLLER_NAME GetControllerName; ///< Protocol function to get controller name
+ CHAR8 *SupportedLanguages; ///< Number of Supported languages.
+};
+
+extern EFI_GUID gGopComponentName2ProtocolGuid;
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopPolicy.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopPolicy.h
new file mode 100644
index 0000000000..866f60b9c2
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/GopPolicy.h
@@ -0,0 +1,73 @@
+/** @file
+ Interface definition for GopPolicy Protocol.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _GOP_POLICY_PROTOCOL_H_
+#define _GOP_POLICY_PROTOCOL_H_
+
+
+#define GOP_POLICY_PROTOCOL_REVISION_01 0x01
+#define GOP_POLICY_PROTOCOL_REVISION_03 0x03
+
+typedef enum {
+ LidClosed,
+ LidOpen,
+ LidStatusMax
+} LID_STATUS;
+
+typedef enum {
+ Docked,
+ UnDocked,
+ DockStatusMax
+} DOCK_STATUS;
+
+///
+/// Function to retrieve LID status
+///
+typedef
+EFI_STATUS
+(EFIAPI *GET_PLATFORM_LID_STATUS) (
+ OUT LID_STATUS * CurrentLidStatus
+ );
+
+///
+/// Function to retrieve Dock status
+///
+typedef
+EFI_STATUS
+(EFIAPI *GET_PLATFORM_DOCK_STATUS) (
+ OUT DOCK_STATUS CurrentDockStatus
+);
+
+///
+/// Function to retrieve VBT table address and size
+///
+typedef
+EFI_STATUS
+(EFIAPI *GET_VBT_DATA) (
+ OUT EFI_PHYSICAL_ADDRESS * VbtAddress,
+ OUT UINT32 *VbtSize
+ );
+
+/**
+ System Agent Graphics Output Protocol (GOP) - Policy Protocol\n
+ Graphics Output Protocol (GOP) is a UEFI API replacing legacy Video ROMs for EFI boot\n
+ When GOP Driver is used this protocol can be consumed by GOP driver or platform code for GOP relevant initialization\n
+ All functions in this protocol should be initialized by platform code basing on platform implementation\n
+**/
+typedef struct {
+ UINT32 Revision; ///< Protocol revision
+ GET_PLATFORM_LID_STATUS GetPlatformLidStatus; ///< Protocol function to get Lid Status. Platform code should provide this function basing on design.
+ GET_VBT_DATA GetVbtData; ///< Protocol function to get Vbt Data address and size. Platform code should provide this function basing on design.
+ GET_PLATFORM_DOCK_STATUS GetPlatformDockStatus; ///< Function pointer for get platform dock status.
+ EFI_GUID GopOverrideGuid; ///< A GUID provided by BIOS in case GOP is to be overridden.
+} GOP_POLICY_PROTOCOL;
+
+extern EFI_GUID gGopPolicyProtocolGuid;
+extern EFI_GUID gIntelGraphicsVbtGuid;
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/IgdOpRegion.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/IgdOpRegion.h
new file mode 100644
index 0000000000..ef2edfe122
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/IgdOpRegion.h
@@ -0,0 +1,24 @@
+/** @file
+ This file is part of the IGD OpRegion Implementation. The IGD OpRegion is
+ an interface between system BIOS, ASL code, and Graphics drivers.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _IGD_OPREGION_PROTOCOL_H_
+#define _IGD_OPREGION_PROTOCOL_H_
+
+#include <IndustryStandard/IgdOpRegion.h>
+
+extern EFI_GUID gIgdOpRegionProtocolGuid;
+
+///
+/// IGD OpRegion Protocol
+///
+typedef struct {
+ IGD_OPREGION_STRUCTURE *OpRegion; ///< IGD Operation Region Structure
+} IGD_OPREGION_PROTOCOL;
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/MemInfo.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/MemInfo.h
new file mode 100644
index 0000000000..031e55b9b4
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/MemInfo.h
@@ -0,0 +1,132 @@
+/** @file
+ This protocol provides the memory information data, such as
+ total physical memory size, memory frequency, memory size
+ of each dimm and rank.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _MEM_INFO_PROTOCOL_H_
+#define _MEM_INFO_PROTOCOL_H_
+
+
+//
+// Extern the GUID for protocol users.
+//
+extern EFI_GUID gMemInfoProtocolGuid;
+
+//
+// Protocol definitions
+//
+#define NODE_NUM 1
+#define CH_NUM 2
+#define DIMM_NUM 2
+#define RANK_NUM 2
+#define SLOT_NUM (CH_NUM * DIMM_NUM)
+#define PROFILE_NUM 4 // number of memory profiles supported
+#define XMP_PROFILE_NUM 2 // number of XMP profiles supported
+
+//
+// Matches MrcDdrType enum in MRC
+//
+#ifndef MRC_DDR_TYPE_DDR4
+#define MRC_DDR_TYPE_DDR4 0
+#endif
+#ifndef MRC_DDR_TYPE_DDR3
+#define MRC_DDR_TYPE_DDR3 1
+#endif
+#ifndef MRC_DDR_TYPE_LPDDR3
+#define MRC_DDR_TYPE_LPDDR3 2
+#endif
+#ifndef MRC_DDR_TYPE_UNKNOWN
+#define MRC_DDR_TYPE_UNKNOWN 3
+#endif
+
+//
+// Matches MrcDimmSts enum in MRC
+//
+#ifndef DIMM_ENABLED
+#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected.
+#endif
+#ifndef DIMM_DISABLED
+#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence.
+#endif
+#ifndef DIMM_PRESENT
+#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used.
+#endif
+#ifndef DIMM_NOT_PRESENT
+#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair.
+#endif
+
+#pragma pack(1)
+///
+/// Memory timing Structure
+///
+typedef struct {
+ UINT32 tCK; ///< Offset 0 Memory cycle time, in femtoseconds.
+ UINT16 NMode; ///< Offset 4 Number of tCK cycles for the channel DIMM's command rate mode.
+ UINT16 tCL; ///< Offset 6 Number of tCK cycles for the channel DIMM's CAS latency.
+ UINT16 tCWL; ///< Offset 8 Number of tCK cycles for the channel DIMM's minimum CAS write latency time.
+ UINT16 tFAW; ///< Offset 10 Number of tCK cycles for the channel DIMM's minimum four activate window delay time.
+ UINT16 tRAS; ///< Offset 12 Number of tCK cycles for the channel DIMM's minimum active to precharge delay time.
+ UINT16 tRCDtRP; ///< Offset 14 Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time
+ UINT16 tREFI; ///< Offset 16 Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval.
+ UINT16 tRFC; ///< Offset 18 Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time.
+ UINT16 tRPab; ///< Offset 20 Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks.
+ UINT16 tRRD; ///< Offset 22 Number of tCK cycles for the channel DIMM's minimum row active to row active delay time.
+ UINT16 tRTP; ///< Offset 24 Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time.
+ UINT16 tWR; ///< Offset 26 Number of tCK cycles for the channel DIMM's minimum write recovery time.
+ UINT16 tWTR; ///< Offset 28 Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time.
+ UINT16 tRRD_L; ///< Offset 30 Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups.
+ UINT16 tRRD_S; ///< Offset 32 Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups.
+ UINT16 tWTR_L; ///< Offset 34 Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups.
+ UINT16 tWTR_S; ///< Offset 36 Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups.
+ UINT8 Rsvd[2]; ///< Offset 38
+} MEMORY_TIMING;
+
+typedef struct {
+ UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group.
+ UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups.
+ UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM).
+ UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs
+} TURNAROUND_TIMING;
+
+// @todo use the MemInfoHob data instead of duplicate structure.
+///
+/// Memory information Data Structure
+///
+typedef struct {
+ MEMORY_TIMING Timing[PROFILE_NUM]; ///< Offset 0 Timming information for the DIMM
+ UINT32 memSize; ///< Offset 128 Total physical memory size
+ UINT16 ddrFreq; ///< Offset 132 DDR Current Frequency
+ UINT16 ddrFreqMax; ///< Offset 134 DDR Maximum Frequency
+ UINT16 dimmSize[NODE_NUM * CH_NUM * DIMM_NUM]; ///< Offset 136 Size of each DIMM
+ UINT16 VddVoltage[PROFILE_NUM]; ///< Offset 144 The voltage setting for the DIMM
+ UINT8 DimmStatus[NODE_NUM * CH_NUM * DIMM_NUM]; ///< Offset 152 The enumeration value from MrcDimmSts
+ UINT8 RankInDimm[NODE_NUM * CH_NUM * DIMM_NUM]; ///< Offset 156 No. of ranks in a dimm
+ UINT8 *DimmsSpdData[NODE_NUM * CH_NUM * DIMM_NUM]; ///< Offset 160 SPD data of each DIMM
+ UINT8 RefClk; ///< Offset 192 Reference Clock
+ UINT8 Ratio; ///< Offset 193 Clock Multiplier
+ BOOLEAN EccSupport; ///< Offset 194 ECC supported or not
+ UINT8 Profile; ///< Offset 195 Currently running memory profile
+ UINT8 XmpProfileEnable; ///< Offset 196: 0 = no XMP DIMMs in system
+ UINT8 DdrType; ///< Offset 197: Current DDR type, see DDR_TYPE_xxx defines above
+ UINT8 Reserved[2]; ///< Offset 198 Reserved bytes for future use
+ UINT32 DefaultXmptCK[XMP_PROFILE_NUM]; ///< Offset 200 The Default XMP tCK values read from SPD.
+ TURNAROUND_TIMING tRd2Rd[CH_NUM]; ///< Read-to-Read Turn Around Timings
+ TURNAROUND_TIMING tRd2Wr[CH_NUM]; ///< Read-to-Write Turn Around Timings
+ TURNAROUND_TIMING tWr2Rd[CH_NUM]; ///< Write-to-Read Turn Around Timings
+ TURNAROUND_TIMING tWr2Wr[CH_NUM]; ///< Write-to-Write Turn Around Timings
+} MEMORY_INFO_DATA;
+#pragma pack()
+
+///
+/// Memory information Protocol definition
+///
+typedef struct {
+ MEMORY_INFO_DATA MemInfoData; ///< Memory Information Data Structure
+} MEM_INFO_PROTOCOL;
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/SaPolicy.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/SaPolicy.h
new file mode 100644
index 0000000000..7b68f3072b
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Protocol/SaPolicy.h
@@ -0,0 +1,66 @@
+/** @file
+ Interface definition details between System Agent and platform drivers during DXE phase.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_POLICY_H_
+#define _SA_POLICY_H_
+
+#include <SaAccess.h>
+#include <ConfigBlock.h>
+#include <Library/ConfigBlockLib.h>
+#include <ConfigBlock/GraphicsDxeConfig.h>
+#include <ConfigBlock/MemoryDxeConfig.h>
+#include <ConfigBlock/MiscDxeConfig.h>
+#include <ConfigBlock/PcieDxeConfig.h>
+#include <ConfigBlock/VbiosDxeConfig.h>
+
+///
+/// Extern the GUID for protocol users.
+///
+extern EFI_GUID gSaPolicyProtocolGuid;
+extern EFI_GUID gGraphicsDxeConfigGuid;
+extern EFI_GUID gMiscDxeConfigGuid;
+extern EFI_GUID gPcieDxeConfigGuid;
+extern EFI_GUID gMemoryDxeConfigGuid;
+extern EFI_GUID gVbiosDxeConfigGuid;
+
+/**
+ Don't change the original SA_POLICY_PROTOCOL_REVISION macro, external
+ modules maybe have consumed this macro in their source code. Directly
+ update the SA_POLICY_PROTOCOL_REVISION version number may cause those
+ external modules to auto mark themselves wrong version info.
+ Always create new version macro for new Policy protocol interface.
+**/
+#define SA_POLICY_PROTOCOL_REVISION 1
+
+#define SA_PCIE_DEV_END_OF_TABLE 0xFFFF
+
+#define LTR_MAX_SNOOP_LATENCY_VALUE 0x0846 ///< Intel recommended maximum value for Snoop Latency
+#define LTR_MAX_NON_SNOOP_LATENCY_VALUE 0x0846 ///< Intel recommended maximum value for Non-Snoop Latency
+
+
+/**
+ SA DXE Policy
+
+ The SA_POLICY_PROTOCOL producer drvier is recommended to
+ set all the SA_POLICY_PROTOCOL size buffer zero before init any member parameter,
+ this clear step can make sure no random value for those unknow new version parameters.
+
+ Make sure to update the Revision if any change to the protocol, including the existing
+ internal structure definations.\n
+ Note: Here revision will be bumped up when adding/removing any config block under this structure.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_TABLE_HEADER TableHeader; ///< Offset 0-31
+/*
+ Individual Config Block Structures are added here in memory as part of AddConfigBlock()
+*/
+} SA_POLICY_PROTOCOL;
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsGna.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsGna.h
new file mode 100644
index 0000000000..6f3541e3e9
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsGna.h
@@ -0,0 +1,32 @@
+/** @file
+ Register names for GNA block
+ <b>Conventions</b>:
+ - Prefixes:
+ - Definitions beginning with "R_" are registers
+ - Definitions beginning with "B_" are bits within registers
+ - Definitions beginning with "V_" are meaningful values of bits within the registers
+ - Definitions beginning with "S_" are register sizes
+ - Definitions beginning with "N_" are the bit position
+ - In general, SA registers are denoted by "_SA_" in register names
+ - Registers / bits that are different between SA generations are denoted by
+ "_SA_[generation_name]_" in register/bit names. e.g., "_SA_HSW_"
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a SA generation will be just named
+ as "_SA_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_REGS_GNA_H_
+#define _SA_REGS_GNA_H_
+
+//
+// Device 8 Equates
+//
+#define SA_GNA_BUS_NUM 0x00
+#define SA_GNA_DEV_NUM 0x08
+#define SA_GNA_FUN_NUM 0x00
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsHostBridge.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsHostBridge.h
new file mode 100644
index 0000000000..2cc0e5be68
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsHostBridge.h
@@ -0,0 +1,214 @@
+/** @file
+ Register names for Host Bridge block
+ <b>Conventions</b>:
+ - Prefixes:
+ - Definitions beginning with "R_" are registers
+ - Definitions beginning with "B_" are bits within registers
+ - Definitions beginning with "V_" are meaningful values of bits within the registers
+ - Definitions beginning with "S_" are register sizes
+ - Definitions beginning with "N_" are the bit position
+ - In general, SA registers are denoted by "_SA_" in register names
+ - Registers / bits that are different between SA generations are denoted by
+ "_SA_[generation_name]_" in register/bit names. e.g., "_SA_HSW_"
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a SA generation will be just named
+ as "_SA_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_REGS_HOST_BRIDGE_H_
+#define _SA_REGS_HOST_BRIDGE_H_
+
+//
+// DEVICE 0 (Memory Controller Hub)
+//
+#define SA_MC_BUS 0x00
+#define SA_MC_DEV 0x00
+#define SA_MC_FUN 0x00
+#define V_SA_MC_VID 0x8086
+#define R_SA_MC_DEVICE_ID 0x02
+#define R_SA_MC_CAPID0_B 0xE8
+
+///
+/// Maximum number of SDRAM channels supported by the memory controller
+///
+#define SA_MC_MAX_CHANNELS 2
+
+///
+/// Maximum number of DIMM sockets supported by each channel
+///
+#define SA_MC_MAX_SLOTS 2
+
+///
+/// Maximum number of sides supported per DIMM
+///
+#define SA_MC_MAX_SIDES 2
+
+///
+/// Maximum number of DIMM sockets supported by the memory controller
+///
+#define SA_MC_MAX_SOCKETS (SA_MC_MAX_CHANNELS * SA_MC_MAX_SLOTS)
+
+///
+/// Maximum number of rows supported by the memory controller
+///
+#define SA_MC_MAX_RANKS (SA_MC_MAX_SOCKETS * SA_MC_MAX_SIDES)
+
+///
+/// Maximum number of rows supported by the memory controller
+///
+#define SA_MC_MAX_ROWS (SA_MC_MAX_SIDES * SA_MC_MAX_SOCKETS)
+
+///
+/// Maximum memory supported by the memory controller
+/// 4 GB in terms of KB
+///
+#define SA_MC_MAX_MEM_CAPACITY (4 * 1024 * 1024)
+
+///
+/// Define the maximum number of data bytes on a system with no ECC memory support.
+///
+#define SA_MC_MAX_BYTES_NO_ECC (8)
+
+///
+/// Define the maximum number of SPD data bytes on a DIMM.
+///
+#define SA_MC_MAX_SPD_SIZE (512)
+//
+// Maximum DMI lanes and bundles supported (x8 and 4 lanes)
+//
+#define SA_DMI_MAX_LANE 0x04
+#define SA_DMI_MAX_BUNDLE 0x02
+
+#define SA_DMI_CFL_MAX_LANE 0x04
+#define SA_DMI_CFL_MAX_BUNDLE 0x02
+//
+// KabyLake CPU Mobile SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_KBL_MB_ULT_1 0x5904 ///< Kabylake Ult (OPI) (2+1F/1.5F/2F/3/3E) Mobile SA DID
+//
+// KabyLake CPU Halo SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_KBL_HALO_2 0x5910 ///< Kabylake Halo (4+2/4E/3FE) SA DID
+//
+// KabyLake CPU Desktop SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_KBL_DT_2 0x591F ///< Kabylake Desktop (4+1.5F/2/4) SA DID
+//
+// KabyLake CPU Server SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_KBL_SVR_2 0x5918 ///< Kabylake Server (4+1/2/4E) SA DID
+
+//
+// CoffeeLake CPU Mobile SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_CFL_ULT_1 0x3ED0 ///< CoffeeLake Mobile (CFL-U 4+3e) SA DID
+#define V_SA_DEVICE_ID_CFL_ULT_2 0x3ECC ///< CoffeeLake Mobile (CFL-U 2+3e) SA DID
+#define V_SA_DEVICE_ID_CFL_ULT_3 0x3E34 ///< CoffeeLake Mobile (CFL-U 4+(1 or 2)) SA DID
+#define V_SA_DEVICE_ID_CFL_ULT_4 0x3E35 ///< CoffeeLake Mobile (CFL-U 2+(1 or 2)) SA DID
+#define V_SA_DEVICE_ID_CFL_ULT_6 0x3ECC ///< CoffeeLake Mobile (CFL-U 2+3e) SA DID
+
+//
+// CoffeeLake CPU Desktop SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_CFL_DT_1 0x3EC2 ///< CoffeeLake Desktop (6+2) SA DID
+#define V_SA_DEVICE_ID_CFL_DT_2 0x3E1F ///< CoffeeLake Desktop (4+2) SA DID
+#define V_SA_DEVICE_ID_CFL_DT_3 0x3E0F ///< CoffeeLake Desktop (2+2) SA DID
+#define V_SA_DEVICE_ID_CFL_DT_4 0x3E30 ///< CoffeeLake Desktop (8+2) SA DID
+
+//
+// CoffeeLake CPU Halo SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_CFL_HALO_1 0x3EC4 ///< CoffeeLake Halo (6+2) SA DID
+#define V_SA_DEVICE_ID_CFL_HALO_2 0x3E10 ///< CoffeeLake Halo (4+2) SA DID
+#define V_SA_DEVICE_ID_CFL_HALO_3 0x3E20 ///< CoffeeLake Halo (8+2) SA DID
+
+//
+// CoffeeLake CPU WS SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_CFL_WS_1 0x3EC6 ///< CoffeeLake WorkStation (6+2) SA DID
+#define V_SA_DEVICE_ID_CFL_WS_2 0x3E18 ///< CoffeeLake WrokStation (4+2) SA DID
+#define V_SA_DEVICE_ID_CFL_WS_3 0x3E31 ///< CoffeeLake WrokStation (8+2) SA DID
+
+//
+// CPU Server SA Device IDs B0:D0:F0
+//
+#define V_SA_DEVICE_ID_CFL_SVR_1 0x3ECA ///< CoffeeLake Server (6+0) SA DID
+#define V_SA_DEVICE_ID_CFL_SVR_2 0x3E32 ///< CoffeeLake Server (8+0) SA DID
+#define V_SA_DEVICE_ID_CFL_SVR_3 0x3E33 ///< CoffeeLake Server (4+0) SA DID
+/**
+ <b>Description</b>:
+ - This is the base address for the Host Memory Mapped Configuration space. There is no physical memory within this 32KB window that can be addressed. The 32KB reserved by this register does not alias to any PCI 2.3 compliant memory mapped space. On reset, the Host MMIO Memory Mapped Configuation space is disabled and must be enabled by writing a 1 to MCHBAREN [Dev 0, offset48h, bit 0].
+ - All the bits in this register are locked in LT mode.
+ - The register space contains memory control, initialization, timing, and buffer strength registers; clocking registers; and power and thermal management registers.
+**/
+#define R_SA_MCHBAR (0x48)
+/**
+ <b>Description</b>:
+ - All the bits in this register are LT lockable.
+**/
+#define R_SA_GGC (0x50)
+#define N_SA_GGC_GMS_OFFSET (0x8)
+#define B_SA_GGC_GMS_MASK (0xff00)
+#define N_SA_GGC_GGMS_OFFSET (0x6)
+#define B_SA_GGC_GGMS_MASK (0xc0)
+#define V_SA_GGC_GGMS_8MB 3
+/**
+ Description:
+ - Allows for enabling/disabling of PCI devices and functions that are within the CPU package. The table below the bit definitions describes the behavior of all combinations of transactions to devices controlled by this register.
+ All the bits in this register are LT Lockable.
+**/
+#define R_SA_DEVEN (0x54)
+#define B_SA_DEVEN_D2EN_MASK (0x10)
+/**
+ Description:
+ This is the base address for the PCI Express configuration space. This window of addresses contains the 4KB of configuration space for each PCI Express device that can potentially be part of the PCI Express Hierarchy associated with the Uncore. There is no actual physical memory within this window of up to 256MB that can be addressed. The actual size of this range is determined by a field in this register.
+ Each PCI Express Hierarchy requires a PCI Express BASE register. The Uncore supports one PCI Express Hierarchy. The region reserved by this register does not alias to any PCI2.3 compliant memory mapped space. For example, the range reserved for MCHBAR is outside of PCIEXBAR space.
+ On reset, this register is disabled and must be enabled by writing a 1 to the enable field in this register. This base address shall be assigned on a boundary consistent with the number of buses (defined by the length field in this register), above TOLUD and still within 39-bit addressable memory space.
+ The PCI Express Base Address cannot be less than the maximum address written to the Top of physical memory register (TOLUD). Software must guarantee that these ranges do not overlap with known ranges located above TOLUD.
+ Software must ensure that the sum of the length of the enhanced configuration region + TOLUD + any other known ranges reserved above TOLUD is not greater than the 39-bit addessable limit of 512GB. In general, system implementation and the number of PCI/PCI Express/PCI-X buses supported in the hierarchy will dictate the length of the region.
+ All the bits in this register are locked in LT mode.
+**/
+#define R_SA_PCIEXBAR (0x60)
+
+/**
+ Description:
+ - This register controls the read, write and shadowing attributes of the BIOS range from F_0000h to F_FFFFh. The Uncore allows programmable memory attributes on 13 legacy memory segments of various sizes in the 768KB to 1MB address range. Seven Programmable Attribute Map (PAM) registers are used to support these features. Cacheability of these areas is controlled via the MTRR register in the core.
+ - Two bits are used to specify memory attributes for each memory segment. These bits apply to host accesses to the PAM areas. These attributes are:
+ - RE - Read Enable. When RE=1, the host read accesses to the corresponding memory segment are claimed by the Uncore and directed to main memory. Conversely, when RE=0, the host read accesses are directed to DMI.
+ - WE - Write Enable. When WE=1, the host write accesses to the corresponding memory segment are claimed by the Uncore and directed to main memory. Conversely, when WE=0, the host read accesses are directed to DMI.
+ - The RE and WE attributes permit a memory segment to be Read Only, Write Only, Read/Write or Disabled. For example, if a memory segment has RE=1 and WE=0, the segment is Read Only.
+**/
+#define R_SA_PAM0 (0x80)
+
+///
+/// Description:
+/// The SMRAMC register controls how accesses to Compatible SMRAM spaces are treated. The Open, Close and Lock bits function only when G_SMRAME bit is set to 1. Also, the Open bit must be reset before the Lock bit is set.
+///
+#define R_SA_SMRAMC (0x88)
+#define B_SA_SMRAMC_D_LCK_MASK (0x10)
+#define B_SA_SMRAMC_D_CLS_MASK (0x20)
+#define B_SA_SMRAMC_D_OPEN_MASK (0x40)
+///
+/// Description:
+/// This register contains the Top of low memory address.
+///
+#define R_SA_TOLUD (0xbc)
+#define R_SA_MC_CAPID0_A_OFFSET 0xE4
+//
+// MCHBAR IO Register Offset Equates
+//
+#define R_SA_MCHBAR_BIOS_RESET_CPL_OFFSET 0x5DA8
+
+#define V_SA_LTR_MAX_SNOOP_LATENCY_VALUE 0x0846 ///< Intel recommended maximum value for Snoop Latency (70us)
+#define V_SA_LTR_MAX_NON_SNOOP_LATENCY_VALUE 0x0846 ///< Intel recommended maximum value for Non-Snoop Latency (70us)
+///
+/// Vt-d Engine base address.
+///
+#define R_SA_MCHBAR_VTD1_OFFSET 0x5400 ///< HW UNIT1 for IGD
+#define R_SA_MCHBAR_VTD3_OFFSET 0x5410 ///< HW UNIT3 for all other - PEG, USB, SATA etc
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIgd.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIgd.h
new file mode 100644
index 0000000000..f8b794a9fb
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIgd.h
@@ -0,0 +1,50 @@
+/** @file
+ Register names for IGD block
+ <b>Conventions</b>:
+ - Prefixes:
+ - Definitions beginning with "R_" are registers
+ - Definitions beginning with "B_" are bits within registers
+ - Definitions beginning with "V_" are meaningful values of bits within the registers
+ - Definitions beginning with "S_" are register sizes
+ - Definitions beginning with "N_" are the bit position
+ - In general, SA registers are denoted by "_SA_" in register names
+ - Registers / bits that are different between SA generations are denoted by
+ "_SA_[generation_name]_" in register/bit names. e.g., "_SA_HSW_"
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a SA generation will be just named
+ as "_SA_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_REGS_IGD_H_
+#define _SA_REGS_IGD_H_
+
+///
+/// Device 2 Register Equates
+///
+//
+// The following equates must be reviewed and revised when the specification is ready.
+//
+#define SA_IGD_BUS 0x00
+#define SA_IGD_DEV 0x02
+#define SA_IGD_FUN_0 0x00
+#define SA_IGD_DEV_FUN (SA_IGD_DEV << 3)
+#define SA_IGD_BUS_DEV_FUN (SA_MC_BUS << 8) + SA_IGD_DEV_FUN
+
+#define V_SA_IGD_VID 0x8086
+#define SA_GT_APERTURE_SIZE_256MB 1 ///< 256MB is the recommanded GT Aperture Size as per BWG.
+
+#define V_SA_PCI_DEV_2_GT2_CFL_ULT_1_ID 0x3EA0 ///< Dev2 CFL-U GT2
+#define V_SA_PCI_DEV_2_GT1_CFL_ULT_1_ID 0x3EA1 ///< Dev2 CFL-U GT1
+#define R_SA_IGD_VID 0x00
+#define R_SA_IGD_DID 0x02
+#define R_SA_IGD_CMD 0x04
+
+#define R_SA_IGD_SWSCI_OFFSET 0x00E8
+#define R_SA_IGD_ASLS_OFFSET 0x00FC ///< ASL Storage
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIpu.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIpu.h
new file mode 100644
index 0000000000..b26c79ec95
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsIpu.h
@@ -0,0 +1,37 @@
+/** @file
+ Register names for IPU block
+ <b>Conventions</b>:
+ - Prefixes:
+ - Definitions beginning with "R_" are registers
+ - Definitions beginning with "B_" are bits within registers
+ - Definitions beginning with "V_" are meaningful values of bits within the registers
+ - Definitions beginning with "S_" are register sizes
+ - Definitions beginning with "N_" are the bit position
+ - In general, SA registers are denoted by "_SA_" in register names
+ - Registers / bits that are different between SA generations are denoted by
+ "_SA_[generation_name]_" in register/bit names. e.g., "_SA_HSW_"
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a SA generation will be just named
+ as "_SA_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_REGS_IPU_H_
+#define _SA_REGS_IPU_H_
+
+//
+// Device 5 Equates
+//
+#define SA_IPU_BUS_NUM 0x00
+#define SA_IPU_DEV_NUM 0x05
+#define SA_IPU_FUN_NUM 0x00
+
+//
+// GPIO native features pins data
+//
+#define SA_GPIO_IMGUCLK_NUMBER_OF_PINS 2
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsPeg.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsPeg.h
new file mode 100644
index 0000000000..b7e9416fc6
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/Register/SaRegsPeg.h
@@ -0,0 +1,64 @@
+/** @file
+ Register names for PEG block
+ <b>Conventions</b>:
+ - Prefixes:
+ - Definitions beginning with "R_" are registers
+ - Definitions beginning with "B_" are bits within registers
+ - Definitions beginning with "V_" are meaningful values of bits within the registers
+ - Definitions beginning with "S_" are register sizes
+ - Definitions beginning with "N_" are the bit position
+ - In general, SA registers are denoted by "_SA_" in register names
+ - Registers / bits that are different between SA generations are denoted by
+ "_SA_[generation_name]_" in register/bit names. e.g., "_SA_HSW_"
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a SA generation will be just named
+ as "_SA_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_REGS_PEG_H_
+#define _SA_REGS_PEG_H_
+//
+// Device 1 Memory Mapped IO Register Offset Equates
+//
+#define SA_PEG_BUS_NUM 0x00
+#define SA_PEG_DEV_NUM 0x01
+#define SA_PEG0_DEV_NUM SA_PEG_DEV_NUM
+#define SA_PEG0_FUN_NUM 0x00
+#define SA_PEG1_DEV_NUM SA_PEG_DEV_NUM
+#define SA_PEG1_FUN_NUM 0x01
+#define SA_PEG2_DEV_NUM SA_PEG_DEV_NUM
+#define SA_PEG2_FUN_NUM 0x02
+//
+// Temporary Device & Function Number used for Switchable Graphics DGPU
+//
+#define SA_TEMP_DGPU_DEV 0x00
+#define SA_TEMP_DGPU_FUN 0x00
+
+//
+// SA PCI Express* Port configuration
+//
+#define SA_PEG_MAX_FUN 0x03
+#define SA_PEG_MAX_LANE 0x10
+#define SA_PEG_MAX_BUNDLE 0x08
+
+//
+// Silicon and SKU- specific MAX defines
+//
+#define SA_PEG_CNL_H_MAX_FUN SA_PEG_MAX_FUN // CNL-H- SKU supports 4 controllers with 20 PEG lanes and 10 bundles
+#define SA_PEG_CNL_H_MAX_LANE SA_PEG_MAX_LANE
+#define SA_PEG_CNL_H_MAX_BUNDLE SA_PEG_MAX_BUNDLE
+#define SA_PEG_NON_CNL_H_MAX_FUN 0x03 // All non-CNL-H- SKU supports 3 controllers with 16 PEG lanes and 8 bundles
+#define SA_PEG_NON_CNL_H_MAX_LANE 0x10
+#define SA_PEG_NON_CNL_H_MAX_BUNDLE 0x08
+
+
+
+#define R_SA_PEG_VID_OFFSET 0x00 ///< Vendor ID
+#define R_SA_PEG_DID_OFFSET 0x02 ///< Device ID
+#define R_SA_PEG_SS_OFFSET 0x8C ///< Subsystem ID
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaAccess.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaAccess.h
new file mode 100644
index 0000000000..b98f1732ba
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaAccess.h
@@ -0,0 +1,106 @@
+/** @file
+ Macros to simplify and abstract the interface to PCI configuration.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SAACCESS_H_
+#define _SAACCESS_H_
+
+#include "SaRegs.h"
+#include "SaCommonDefinitions.h"
+
+///
+/// SystemAgent Base Address definition
+///
+#ifndef STALL_ONE_MICRO_SECOND
+#define STALL_ONE_MICRO_SECOND 1
+#endif
+#ifndef STALL_ONE_MILLI_SECOND
+#define STALL_ONE_MILLI_SECOND 1000
+#endif
+
+//
+// SA Segement Number
+//
+#define SA_SEG_NUM 0x00
+
+#define V_SA_DEVICE_ID_INVALID 0xFFFF
+
+
+///
+/// The value before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature
+///
+typedef enum {
+ PcieAspmDisabled,
+ PcieAspmL0s,
+ PcieAspmL1,
+ PcieAspmL0sL1,
+ PcieAspmAutoConfig,
+ PcieAspmMax
+} SA_PCIE_ASPM_CONFIG;
+
+///
+/// SgMode settings
+///
+typedef enum {
+ SgModeDisabled = 0,
+ SgModeReserved,
+ SgModeMuxless,
+ SgModeDgpu,
+ SgModeMax
+} SG_MODE;
+
+//
+// Macros that judge which type a device ID belongs to
+//
+#define IS_SA_DEVICE_ID_MOBILE(DeviceId) \
+ ( \
+ (DeviceId == V_SA_DEVICE_ID_KBL_MB_ULT_1) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_ULT_1) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_ULT_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_ULT_3) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_ULT_4) \
+ )
+
+///
+/// Device IDs that are Desktop specific B0:D0:F0
+///
+#define IS_SA_DEVICE_ID_DESKTOP(DeviceId) \
+ ( \
+ (DeviceId == V_SA_DEVICE_ID_KBL_DT_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_DT_1) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_DT_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_DT_3) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_DT_4) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_WS_1) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_WS_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_WS_3) \
+ )
+
+///
+/// Device IDS that are Server specific B0:D0:F0
+///
+#define IS_SA_DEVICE_ID_SERVER(DeviceId) \
+ ( \
+ (DeviceId == V_SA_DEVICE_ID_KBL_SVR_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_SVR_1) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_SVR_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_SVR_3) \
+ )
+
+///
+/// Device IDs that are Halo specific B0:D0:F0
+///
+#define IS_SA_DEVICE_ID_HALO(DeviceId) \
+ ( \
+ (DeviceId == V_SA_DEVICE_ID_KBL_HALO_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_HALO_1) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_HALO_2) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_HALO_3) || \
+ (DeviceId == V_SA_DEVICE_ID_CFL_HALO_IOT_1) \
+ )
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaCommonDefinitions.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaCommonDefinitions.h
new file mode 100644
index 0000000000..ab9224e573
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaCommonDefinitions.h
@@ -0,0 +1,23 @@
+/** @file
+ This header file provides common definitions just for System Agent using to avoid including extra module's file.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_COMMON_DEFINITIONS_H_
+#define _SA_COMMON_DEFINITIONS_H_
+
+#define ERROR_BY_16 (0xEE15)
+#define ERROR_NOT_BY_16 (0xED15)
+
+#define MAX_PCIE_ASPM_OVERRIDE 500
+#define MAX_PCIE_LTR_OVERRIDE 500
+
+#define DISABLED 0
+#define ENABLED 1
+
+#define SA_VTD_ENGINE_NUMBER 3
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPciExpressLib.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPciExpressLib.h
new file mode 100644
index 0000000000..87aa105df2
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPciExpressLib.h
@@ -0,0 +1,25 @@
+/** @file
+ Header file for the PCI Express library.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_PCI_EXPRESS_LIB_H_
+#define _SA_PCI_EXPRESS_LIB_H_
+
+
+/**
+ Gets the base address of PCI Express.
+
+ This internal functions retrieves PCI Express Base Address.
+
+ @return The base address of PCI Express.
+**/
+VOID*
+GetPciExpressBaseAddress (
+ VOID
+);
+
+#endif
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPolicyCommon.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPolicyCommon.h
new file mode 100644
index 0000000000..086c60bfed
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaPolicyCommon.h
@@ -0,0 +1,51 @@
+/** @file
+ Main System Agent Policy structure definition which will contain several config blocks during runtime.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_POLICY_COMMON_H_
+#define _SA_POLICY_COMMON_H_
+
+#include <Uefi.h>
+#include <Library/SmbusLib.h>
+#include <SaAccess.h>
+#include <ConfigBlock.h>
+#include <Library/ConfigBlockLib.h>
+#include <ConfigBlock/SwitchableGraphicsConfig.h>
+#include <ConfigBlock/MemoryConfig.h>
+#include <ConfigBlock/GraphicsPeiPreMemConfig.h>
+#include <ConfigBlock/PciePeiPreMemConfig.h>
+#include <ConfigBlock/IpuPreMemConfig.h>
+#include <ConfigBlock/SaMiscPeiPreMemConfig.h>
+#include <ConfigBlock/GnaConfig.h>
+#include <ConfigBlock/GraphicsPeiConfig.h>
+#include <ConfigBlock/SaMiscPeiConfig.h>
+#include <ConfigBlock/OverClockingConfig.h>
+#include <ConfigBlock/VtdConfig.h>
+#include <ConfigBlock/PciePeiConfig.h>
+
+
+//
+// Extern the GUID for PPI users.
+//
+extern EFI_GUID gSiPolicyPpiGuid;
+extern EFI_GUID gSaMiscPeiConfigGuid;
+extern EFI_GUID gGraphicsPeiConfigGuid;
+extern EFI_GUID gSaPciePeiConfigGuid;
+extern EFI_GUID gGnaConfigGuid;
+extern EFI_GUID gVtdConfigGuid;
+extern EFI_GUID gSaOverclockingPreMemConfigGuid;
+extern EFI_GUID gSiPreMemPolicyPpiGuid;
+extern EFI_GUID gSaMiscPeiPreMemConfigGuid;
+extern EFI_GUID gSaPciePeiPreMemConfigGuid;
+extern EFI_GUID gGraphicsPeiPreMemConfigGuid;
+extern EFI_GUID gIpuPreMemConfigGuid;
+extern EFI_GUID gSwitchableGraphicsConfigGuid;
+extern EFI_GUID gCpuTraceHubConfigGuid;
+extern EFI_GUID gMemoryConfigGuid;
+extern EFI_GUID gMemoryConfigNoCrcGuid;
+
+#endif // _SA_POLICY_COMMON_H_
diff --git a/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaRegs.h b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaRegs.h
new file mode 100644
index 0000000000..593b907d2a
--- /dev/null
+++ b/Silicon/Intel/CoffeelakeSiliconPkg/SystemAgent/Include/SaRegs.h
@@ -0,0 +1,32 @@
+/** @file
+ Register names for System Agent (SA) registers
+ <b>Conventions</b>:
+ - Prefixes:
+ - Definitions beginning with "R_" are registers
+ - Definitions beginning with "B_" are bits within registers
+ - Definitions beginning with "V_" are meaningful values of bits within the registers
+ - Definitions beginning with "S_" are register sizes
+ - Definitions beginning with "N_" are the bit position
+ - In general, SA registers are denoted by "_SA_" in register names
+ - Registers / bits that are different between SA generations are denoted by
+ "_SA_[generation_name]_" in register/bit names. e.g., "_SA_HSW_"
+ - Registers / bits that are different between SKUs are denoted by "_[SKU_name]"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a SA generation will be just named
+ as "_SA_" without [generation_name] inserted.
+
+ Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _SA_REGS_H_
+#define _SA_REGS_H_
+
+#include <Register/SaRegsHostBridge.h>
+#include <Register/SaRegsIgd.h>
+#include <Register/SaRegsPeg.h>
+#include <Register/SaRegsIpu.h>
+#include <Register/SaRegsGna.h>
+
+#endif
--
2.16.2.windows.1
next prev parent reply other threads:[~2019-08-17 0:16 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-17 0:15 [edk2-platforms][PATCH V1 00/37] Coffee Lake and Whiskey Lake support Kubacki, Michael A
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 01/37] CoffeelakeSiliconPkg: Add package and Include headers Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:08 ` Chiu, Chasel
2019-08-17 1:18 ` Chaganty, Rangasai V
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 02/37] CoffeelakeSiliconPkg/Cpu: Add " Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:08 ` Chiu, Chasel
2019-08-17 6:58 ` Chaganty, Rangasai V
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 03/37] CoffeelakeSiliconPkg/Me: " Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:08 ` Chiu, Chasel
2019-08-17 7:04 ` Chaganty, Rangasai V
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 04/37] CoffeelakeSiliconPkg/Pch: Add include headers Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:08 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 05/37] CoffeelakeSiliconPkg/Pch: Add ConfigBlock headers Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:09 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 06/37] CoffeelakeSiliconPkg/Pch: Add Library include headers Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:09 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 07/37] CoffeelakeSiliconPkg/Pch: Add PPI and Protocol " Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:09 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 08/37] CoffeelakeSiliconPkg/Pch: Add Register " Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:09 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 09/37] CoffeelakeSiliconPkg/Pch: Add Private " Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:12 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 10/37] CoffeelakeSiliconPkg/Pch: Add Private/Library " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:09 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 11/37] CoffeelakeSiliconPkg/Pch: Add Private/Protocol " Kubacki, Michael A
2019-08-17 0:51 ` Nate DeSimone
2019-08-17 1:10 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 12/37] CoffeelakeSiliconPkg/SampleCode: Add Include headers Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:12 ` Chiu, Chasel
2019-08-17 0:15 ` Kubacki, Michael A [this message]
2019-08-17 0:52 ` [edk2-platforms][PATCH V1 13/37] CoffeelakeSiliconPkg/SystemAgent: " Nate DeSimone
2019-08-17 1:12 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 14/37] CoffeelakeSiliconPkg: Add package common library instances Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:12 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 15/37] CoffeelakeSiliconPkg/Cpu: Add " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:15 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 16/37] CoffeelakeSiliconPkg/Me: " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:12 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 17/37] CoffeelakeSiliconPkg/Pch: Add Base " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:13 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 18/37] CoffeelakeSiliconPkg/Pch: Add DXE " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:13 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 19/37] CoffeelakeSiliconPkg/Pch: Add PEI " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:13 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 20/37] CoffeelakeSiliconPkg/Pch: Add SMM " Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:16 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 21/37] CoffeelakeSiliconPkg/Pch: Add Base " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:13 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 22/37] CoffeelakeSiliconPkg/Pch: Add DXE private " Kubacki, Michael A
2019-08-17 0:52 ` Nate DeSimone
2019-08-17 1:13 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 23/37] CoffeelakeSiliconPkg/Pch: Add PEI " Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:14 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 24/37] CoffeelakeSiliconPkg/Pch: Add SMM " Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:14 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 25/37] CoffeelakeSiliconPkg/SystemAgent: Add " Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:14 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 26/37] CoffeelakeSiliconPkg/Pch: Add modules Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:14 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 27/37] CoffeelakeSiliconPkg/Pch: Add PchSmiDispatcher Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:15 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 28/37] CoffeelakeSiliconPkg/SystemAgent: Add modules Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:15 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 29/37] CoffeelakeSiliconPkg: Add package DSC files Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:14 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 30/37] Maintainers.txt: Add CoffeelakeSiliconPkg maintainers Kubacki, Michael A
2019-08-17 0:53 ` Nate DeSimone
2019-08-17 1:15 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 31/37] WhiskeylakeOpenBoardPkg: Add package and headers Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:16 ` Chiu, Chasel
2019-08-19 18:09 ` Sinha, Ankit
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 32/37] WhiskeylakeOpenBoardPkg/WhiskeylakeURvp: Add headers Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:16 ` Chiu, Chasel
2019-08-17 0:15 ` [edk2-platforms][PATCH V1 33/37] WhiskeylakeOpenBoardPkg: Add library instances Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:16 ` Chiu, Chasel
2019-08-17 0:16 ` [edk2-platforms][PATCH V1 34/37] WhiskeylakeOpenBoardPkg/WhiskeylakeURvp: " Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:17 ` Chiu, Chasel
2019-08-17 20:08 ` Chaganty, Rangasai V
2019-08-17 0:16 ` [edk2-platforms][PATCH V1 35/37] WhiskeylakeOpenBoardPkg: Add modules Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:17 ` Chiu, Chasel
2019-08-17 7:50 ` Chaganty, Rangasai V
2019-08-17 0:16 ` [edk2-platforms][PATCH V1 36/37] WhiskeylakeOpenBoardPkg/WhiskeylakeURvp: Add DSC and build files Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:16 ` Chiu, Chasel
2019-08-17 20:11 ` Chaganty, Rangasai V
2019-08-17 0:16 ` [edk2-platforms][PATCH V1 37/37] Add WhiskeylakeOpenBoardPkg to global build config and documentation Kubacki, Michael A
2019-08-17 0:54 ` Nate DeSimone
2019-08-17 1:17 ` Chiu, Chasel
2019-08-17 20:00 ` Chaganty, Rangasai V
2019-08-19 18:14 ` [edk2-platforms][PATCH V1 00/37] Coffee Lake and Whiskey Lake support Sinha, Ankit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190817001603.30632-14-michael.a.kubacki@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox