From: "Zurcher, Christopher J" <christopher.j.zurcher@intel.com>
To: devel@edk2.groups.io
Cc: Michael D Kinney <michael.d.kinney@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Jian J Wang <jian.j.wang@intel.com>,
Liming Gao <liming.gao@intel.com>
Subject: [PATCH v5 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun)
Date: Thu, 22 Aug 2019 15:02:13 -0700 [thread overview]
Message-ID: <20190822220215.24536-3-christopher.j.zurcher@intel.com> (raw)
In-Reply-To: <20190822220215.24536-1-christopher.j.zurcher@intel.com>
Currently UfsPassThru only checks for 8 common LUNs. This adds a check
for the RPMB Well-known LUN and sets the corresponding bit-mask. Further
handling of the WLUN is already present in the driver.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
index b12404aacb..26c5a8b855 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
@@ -822,7 +822,9 @@ UfsPassThruDriverBindingStart (
UINTN UfsHcBase;
UINT32 Index;
UFS_UNIT_DESC UnitDescriptor;
+ UFS_DEV_DESC DeviceDescriptor;
UINT32 UnitDescriptorSize;
+ UINT32 DeviceDescriptorSize;
Status = EFI_SUCCESS;
UfsHc = NULL;
@@ -916,7 +918,6 @@ UfsPassThruDriverBindingStart (
//
// Check if 8 common luns are active and set corresponding bit mask.
- // TODO: Parse device descriptor to decide if exposing RPMB LUN to upper layer for authentication access.
//
UnitDescriptorSize = sizeof (UFS_UNIT_DESC);
for (Index = 0; Index < 8; Index++) {
@@ -931,6 +932,20 @@ UfsPassThruDriverBindingStart (
}
}
+ //
+ // Check if RPMB WLUN is supported and set corresponding bit mask.
+ //
+ DeviceDescriptorSize = sizeof (UFS_DEV_DESC);
+ Status = UfsRwDeviceDesc (Private, TRUE, UfsDeviceDesc, 0, 0, &DeviceDescriptor, &DeviceDescriptorSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to read device descriptor, status = %r\n", Status));
+ } else {
+ if (DeviceDescriptor.SecurityLun == 0x1) {
+ DEBUG ((DEBUG_INFO, "UFS WLUN RPMB is supported\n"));
+ Private->Luns.BitMask |= BIT11;
+ }
+ }
+
//
// Start the asynchronous interrupt monitor
//
--
2.16.2.windows.1
next prev parent reply other threads:[~2019-08-22 22:02 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-22 22:02 [PATCH v5 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
2019-08-22 22:02 ` [PATCH v5 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out Zurcher, Christopher J
2019-08-27 3:03 ` [edk2-devel] " Wu, Hao A
2019-08-30 0:34 ` Zurcher, Christopher J
2019-08-30 5:17 ` Wu, Hao A
2019-08-30 9:14 ` Liming Gao
2019-09-02 1:10 ` Wu, Hao A
2019-09-02 1:46 ` Liming Gao
2019-09-02 2:01 ` Wu, Hao A
2019-08-22 22:02 ` Zurcher, Christopher J [this message]
2019-08-27 3:03 ` [edk2-devel] [PATCH v5 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun) Wu, Hao A
2019-08-22 22:02 ` [PATCH v5 3/4] MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check Zurcher, Christopher J
2019-08-27 3:03 ` [edk2-devel] " Wu, Hao A
2019-08-22 22:02 ` [PATCH v5 4/4] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol Zurcher, Christopher J
2019-08-27 3:03 ` [edk2-devel] " Wu, Hao A
2019-08-23 2:54 ` [edk2-devel] [PATCH v5 0/4] Add SCSI Support for " Wu, Hao A
2019-08-27 3:02 ` Wu, Hao A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190822220215.24536-3-christopher.j.zurcher@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox