From: "Sinha, Ankit" <ankit.sinha@intel.com>
To: devel@edk2.groups.io
Cc: Michael Kubacki <michael.a.kubacki@intel.com>,
Chasel Chiu <chasel.chiu@intel.com>,
Nate DeSimone <nathaniel.l.desimone@intel.com>,
Liming Gao <liming.gao@intel.com>
Subject: [edk2-platforms] [PATCH v2 1/1] MinPlatformPkg/Acpi: MADT NMI default flag set to Edge-Triggered
Date: Fri, 30 Aug 2019 15:28:08 -0700 [thread overview]
Message-ID: <20190830222808.20308-1-ankit.sinha@intel.com> (raw)
1. Default APIC NMI structure in MADT changed to expose
Level-Triggered interrupts.
2. x2APIC NMI structure won't be exposed to OS if x2APIC is not enabled.
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ankit Sinha <ankit.sinha@intel.com>
---
Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c | 54 ++++++++++----------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c b/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
index 5eb727929bfb..1b251ca2962d 100644
--- a/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
+++ b/Platform/Intel/MinPlatformPkg/Acpi/AcpiTables/AcpiPlatform.c
@@ -1,7 +1,7 @@
/** @file
ACPI Platform Driver
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2017 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -1049,7 +1049,7 @@ InstallMadtFromScratch (
LocalApciNmiStruct.Type = EFI_ACPI_4_0_LOCAL_APIC_NMI;
LocalApciNmiStruct.Length = sizeof (EFI_ACPI_4_0_LOCAL_APIC_NMI_STRUCTURE);
LocalApciNmiStruct.AcpiProcessorId = 0xFF; // Applies to all processors
- LocalApciNmiStruct.Flags = 0x000D; // Flags - Level-tiggered, Active High
+ LocalApciNmiStruct.Flags = 0x0005; // Flags - Edge-tiggered, Active High
LocalApciNmiStruct.LocalApicLint = 0x1;
ASSERT (MadtStructsIndex < MaxMadtStructCount);
@@ -1066,24 +1066,26 @@ InstallMadtFromScratch (
//
// Build Local x2APIC NMI Structure
//
- LocalX2ApicNmiStruct.Type = EFI_ACPI_4_0_LOCAL_X2APIC_NMI;
- LocalX2ApicNmiStruct.Length = sizeof (EFI_ACPI_4_0_LOCAL_X2APIC_NMI_STRUCTURE);
- LocalX2ApicNmiStruct.Flags = 0x000D; // Flags - Level-tiggered, Active High
- LocalX2ApicNmiStruct.AcpiProcessorUid = 0xFFFFFFFF; // Applies to all processors
- LocalX2ApicNmiStruct.LocalX2ApicLint = 0x01;
- LocalX2ApicNmiStruct.Reserved[0] = 0x00;
- LocalX2ApicNmiStruct.Reserved[1] = 0x00;
- LocalX2ApicNmiStruct.Reserved[2] = 0x00;
+ if (mX2ApicEnabled) {
+ LocalX2ApicNmiStruct.Type = EFI_ACPI_4_0_LOCAL_X2APIC_NMI;
+ LocalX2ApicNmiStruct.Length = sizeof (EFI_ACPI_4_0_LOCAL_X2APIC_NMI_STRUCTURE);
+ LocalX2ApicNmiStruct.Flags = 0x000D; // Flags - Level-tiggered, Active High
+ LocalX2ApicNmiStruct.AcpiProcessorUid = 0xFFFFFFFF; // Applies to all processors
+ LocalX2ApicNmiStruct.LocalX2ApicLint = 0x01;
+ LocalX2ApicNmiStruct.Reserved[0] = 0x00;
+ LocalX2ApicNmiStruct.Reserved[1] = 0x00;
+ LocalX2ApicNmiStruct.Reserved[2] = 0x00;
- ASSERT (MadtStructsIndex < MaxMadtStructCount);
- Status = CopyStructure (
- &MadtTableHeader.Header,
- (STRUCTURE_HEADER *) &LocalX2ApicNmiStruct,
- &MadtStructs[MadtStructsIndex++]
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "CopyMadtStructure (x2APIC NMI) failed: %r\n", Status));
- goto Done;
+ ASSERT (MadtStructsIndex < MaxMadtStructCount);
+ Status = CopyStructure (
+ &MadtTableHeader.Header,
+ (STRUCTURE_HEADER *) &LocalX2ApicNmiStruct,
+ &MadtStructs[MadtStructsIndex++]
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "CopyMadtStructure (x2APIC NMI) failed: %r\n", Status));
+ goto Done;
+ }
}
//
@@ -1167,7 +1169,7 @@ InstallMcfgFromScratch (
//
// Set MCFG table "Length" field based on the number of PCIe segments enumerated so far
//
- McfgTable->Header.Length = (UINT32)(sizeof (EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE_HEADER) +
+ McfgTable->Header.Length = (UINT32)(sizeof (EFI_ACPI_MEMORY_MAPPED_CONFIGURATION_BASE_ADDRESS_TABLE_HEADER) +
sizeof (EFI_ACPI_MEMORY_MAPPED_ENHANCED_CONFIGURATION_SPACE_BASE_ADDRESS_ALLOCATION_STRUCTURE) * SegmentCount);
Segment = (VOID *)(McfgTable + 1);
@@ -1329,11 +1331,11 @@ PlatformUpdateTables (
HpetCapabilities.Uint64 = HpetCapabilitiesData;
HpetCapabilitiesData = MmioRead32 (HpetBaseAddress + HPET_GENERAL_CAPABILITIES_ID_OFFSET + 4);
HpetCapabilities.Uint64 |= LShiftU64 (HpetCapabilitiesData, 32);
- HpetBlockId.Bits.Revision = HpetCapabilities.Bits.Revision;
- HpetBlockId.Bits.NumberOfTimers = HpetCapabilities.Bits.NumberOfTimers;
- HpetBlockId.Bits.CounterSize = HpetCapabilities.Bits.CounterSize;
- HpetBlockId.Bits.Reserved = 0;
- HpetBlockId.Bits.LegacyRoute = HpetCapabilities.Bits.LegacyRoute;
+ HpetBlockId.Bits.Revision = HpetCapabilities.Bits.Revision;
+ HpetBlockId.Bits.NumberOfTimers = HpetCapabilities.Bits.NumberOfTimers;
+ HpetBlockId.Bits.CounterSize = HpetCapabilities.Bits.CounterSize;
+ HpetBlockId.Bits.Reserved = 0;
+ HpetBlockId.Bits.LegacyRoute = HpetCapabilities.Bits.LegacyRoute;
HpetBlockId.Bits.VendorId = HpetCapabilities.Bits.VendorId;
HpetTable->EventTimerBlockId = HpetBlockId.Uint32;
HpetTable->MainCounterMinimumClockTickInPeriodicMode = (UINT16)HpetCapabilities.Bits.CounterClockPeriod;
@@ -1459,7 +1461,7 @@ UpdateLocalTable (
for (Index = 0; Index < sizeof(mLocalTable)/sizeof(mLocalTable[0]); Index++) {
CurrentTable = mLocalTable[Index];
-
+
PlatformUpdateTables (CurrentTable, &Version);
TableHandle = 0;
--
2.16.2.windows.1
next reply other threads:[~2019-08-30 22:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-30 22:28 Sinha, Ankit [this message]
2019-09-02 14:16 ` [edk2-platforms] [PATCH v2 1/1] MinPlatformPkg/Acpi: MADT NMI default flag set to Edge-Triggered Chiu, Chasel
2019-09-04 7:26 ` [edk2-devel] " Kubacki, Michael A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190830222808.20308-1-ankit.sinha@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox