From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org
Subject: [edk2-platforms PATCH 2/2] Platform/RPi3: Improve the population of PlatformSmbiosDxe elements
Date: Wed, 4 Sep 2019 13:14:18 +0100 [thread overview]
Message-ID: <20190904121418.3700-3-pete@akeo.ie> (raw)
In-Reply-To: <20190904121418.3700-1-pete@akeo.ie>
This patch cleans up the population SMBIOS entries by removing elements
that we don't have data for, as well as properly filling the ones for
which we do, through the newly added queries from RpiFirmwareDxe.
String parsing code is also added to BIOSInfoUpdateSmbiosType0() so
that any numeric "x.y" value being passed in PcdFirmwareVersionString
will now be used to populate the BIOS major and minor.
Additional minor improvements are also applied, such as consistent use
of uppercase values.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c | 193 ++++++++++++--------
Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf | 1 +
Platform/RaspberryPi/RPi3/RPi3.dsc | 2 +-
3 files changed, 117 insertions(+), 79 deletions(-)
diff --git a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
index bc35175279f2..66ffadd0cade 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
+++ b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
@@ -35,11 +35,14 @@
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiLib.h>
#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/PrintLib.h>
+#define SMB_IS_DIGIT(c) (((c) >= '0') && ((c) <= '9'))
+
STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL *mFwProtocol;
/***********************************************************************
@@ -49,7 +52,7 @@ SMBIOS_TABLE_TYPE0 mBIOSInfoType0 = {
{ EFI_SMBIOS_TYPE_BIOS_INFORMATION, sizeof (SMBIOS_TABLE_TYPE0), 0 },
1, // Vendor String
2, // BiosVersion String
- 0x0, // BiosSegment
+ 0, // BiosSegment
3, // BiosReleaseDate String
0x1F, // BiosSize
{ // BiosCharacteristics
@@ -97,23 +100,25 @@ SMBIOS_TABLE_TYPE0 mBIOSInfoType0 = {
// Boot1394IsSupported :1;
// SmartBatteryIsSupported :1;
// BIOSCharacteristicsExtensionBytes[1]
- 0x0e, // BiosBootSpecIsSupported :1;
+ 0x0E, // BiosBootSpecIsSupported :1;
// FunctionKeyNetworkBootIsSupported :1;
// TargetContentDistributionEnabled :1;
// UefiSpecificationSupported :1;
// VirtualMachineSupported :1;
// ExtensionByte2Reserved :3;
},
- 0xFF, // SystemBiosMajorRelease
- 0xFF, // SystemBiosMinorRelease
- 0xFF, // EmbeddedControllerFirmwareMajorRelease
- 0xFF, // EmbeddedControllerFirmwareMinorRelease
+ 0, // SystemBiosMajorRelease
+ 0, // SystemBiosMinorRelease
+ 0, // EmbeddedControllerFirmwareMajorRelease
+ 0, // EmbeddedControllerFirmwareMinorRelease
};
+CHAR8 mBiosVersion[128] = "EDK2-DEV";
+
CHAR8 *mBIOSInfoType0Strings[] = {
- "https://github.com/andreiw/RaspberryPiPkg", // Vendor String
- "Raspberry Pi 64-bit UEFI (" __DATE__ " " __TIME__ ")", // BiosVersion String
- __DATE__,
+ "TianoCore", // Vendor
+ mBiosVersion, // Version
+ __DATE__ " " __TIME__, // Release Date
NULL
};
@@ -132,42 +137,19 @@ SMBIOS_TABLE_TYPE1 mSysInfoType1 = {
6, // Family String
};
-#define PROD_BASE 8
-#define PROD_KNOWN 13
-#define PROD_UNKNOWN 11
-CHAR8 *ProductNames[] = {
- /* 8 */ "3",
- /* 9 */ "Zero",
- /* 10 */ "CM3",
- /* 11 */ "???",
- /* 12 */ "Zero W",
- /* 13 */ "3B+"
-};
-
-#define MANU_UNKNOWN 0
-#define MANU_KNOWN 4
-#define MANU_BASE 1
-CHAR8 *ManufNames[] = {
- "???",
- /* 0 */ "Sony",
- /* 1 */ "Egoman",
- /* 2 */ "Embest",
- /* 3 */ "Sony Japan",
- /* 4 */ "Embest"
-};
-
-CHAR8 mSysInfoManufName[sizeof ("Sony Japan")];
-CHAR8 mSysInfoProductName[sizeof ("64-bit Raspberry Pi XXXXXX (rev. xxxxxxxx)")];
+CHAR8 mSysInfoManufName[128];
+CHAR8 mSysInfoProductName[128];
+CHAR8 mSysInfoVersionName[128];
CHAR8 mSysInfoSerial[sizeof (UINT64) * 2 + 1];
CHAR8 mSysInfoSKU[sizeof (UINT64) * 2 + 1];
CHAR8 *mSysInfoType1Strings[] = {
mSysInfoManufName,
mSysInfoProductName,
- mSysInfoProductName,
+ mSysInfoVersionName,
mSysInfoSerial,
mSysInfoSKU,
- "edk2",
+ "Raspberry Pi",
NULL
};
@@ -180,7 +162,7 @@ SMBIOS_TABLE_TYPE2 mBoardInfoType2 = {
2, // ProductName String
3, // Version String
4, // SerialNumber String
- 5, // AssetTag String
+ 0, // AssetTag String
{ // FeatureFlag
1, // Motherboard :1;
0, // RequiresDaughterCard :1;
@@ -189,7 +171,7 @@ SMBIOS_TABLE_TYPE2 mBoardInfoType2 = {
0, // HotSwappable :1;
0, // Reserved :3;
},
- 6, // LocationInChassis String
+ 0, // LocationInChassis String
0, // ChassisHandle;
BaseBoardTypeMotherBoard, // BoardType;
0, // NumberOfContainedObjectHandles;
@@ -198,10 +180,8 @@ SMBIOS_TABLE_TYPE2 mBoardInfoType2 = {
CHAR8 *mBoardInfoType2Strings[] = {
mSysInfoManufName,
mSysInfoProductName,
- mSysInfoProductName,
+ mSysInfoVersionName,
mSysInfoSerial,
- "None",
- mSysInfoSKU,
NULL
};
@@ -214,7 +194,7 @@ SMBIOS_TABLE_TYPE3 mEnclosureInfoType3 = {
MiscChassisEmbeddedPc, // Type;
2, // Version String
3, // SerialNumber String
- 4, // AssetTag String
+ 0, // AssetTag String
ChassisStateSafe, // BootupState;
ChassisStateSafe, // PowerSupplyState;
ChassisStateSafe, // ThermalState;
@@ -230,7 +210,6 @@ CHAR8 *mEnclosureInfoType3Strings[] = {
mSysInfoManufName,
mSysInfoProductName,
mSysInfoSerial,
- "None",
NULL
};
@@ -240,9 +219,9 @@ CHAR8 *mEnclosureInfoType3Strings[] = {
SMBIOS_TABLE_TYPE4 mProcessorInfoType4 = {
{ EFI_SMBIOS_TYPE_PROCESSOR_INFORMATION, sizeof (SMBIOS_TABLE_TYPE4), 0},
1, // Socket String
- CentralProcessor, // ProcessorType; ///< The enumeration value from PROCESSOR_TYPE_DATA.
+ CentralProcessor, // ProcessorType; ///< The enumeration value from PROCESSOR_TYPE_DATA.
ProcessorFamilyIndicatorFamily2, // ProcessorFamily; ///< The enumeration value from PROCESSOR_FAMILY2_DATA.
- 2, // ProcessorManufacture String;
+ 2, // ProcessorManufacturer String;
{ // ProcessorId;
{ // PROCESSOR_SIGNATURE
0, // ProcessorSteppingId:4;
@@ -306,9 +285,9 @@ SMBIOS_TABLE_TYPE4 mProcessorInfoType4 = {
0, // L1CacheHandle;
0, // L2CacheHandle;
0, // L3CacheHandle;
- 4, // SerialNumber;
- 5, // AssetTag;
- 6, // PartNumber;
+ 0, // SerialNumber;
+ 0, // AssetTag;
+ 0, // PartNumber;
4, // CoreCount;
4, // EnabledCoreCount;
4, // ThreadCount;
@@ -316,13 +295,12 @@ SMBIOS_TABLE_TYPE4 mProcessorInfoType4 = {
ProcessorFamilyARM, // ARM Processor Family;
};
+CHAR8 mCpuName[128] = "Unknown ARM CPU";
+
CHAR8 *mProcessorInfoType4Strings[] = {
"Socket",
- "ARM",
- "BCM2837 ARMv8",
- "1.0",
- "1.0",
- "1.0",
+ "Broadcom",
+ mCpuName,
NULL
};
@@ -430,7 +408,7 @@ SMBIOS_TABLE_TYPE17 mMemDevInfoType17 = {
0x0400, // Size; // When bit 15 is 0: Size in MB
// When bit 15 is 1: Size in KB, and continues in ExtendedSize
MemoryFormFactorUnknown, // FormFactor; ///< The enumeration value from MEMORY_FORM_FACTOR.
- 0xff, // DeviceSet;
+ 0xFF, // DeviceSet;
1, // DeviceLocator String
2, // BankLocator String
MemoryTypeDram, // MemoryType; ///< The enumeration value from MEMORY_DEVICE_TYPE.
@@ -618,6 +596,70 @@ BIOSInfoUpdateSmbiosType0 (
VOID
)
{
+ UINT32 FirmwareRevision = 0;
+ EFI_STATUS Status = EFI_SUCCESS;
+ INTN i;
+ INTN State = 0;
+ INTN Value[2];
+
+ // Populate the Firmware major and minor.
+ Status = mFwProtocol->GetFirmwareRevision (&FirmwareRevision);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to get firmware revision: %r\n", Status));
+ } else {
+ // This expects Broadcom / The Raspberry Pi Foundation to switch to
+ // less nonsensical VideoCore firmware revisions in the future...
+ mBIOSInfoType0.EmbeddedControllerFirmwareMajorRelease =
+ (UINT8)((FirmwareRevision >> 16) & 0xFF);
+ mBIOSInfoType0.EmbeddedControllerFirmwareMinorRelease =
+ (UINT8)(FirmwareRevision & 0xFF);
+ }
+
+ // mBiosVersion, which is referenced in mBIOSInfoType0Strings,
+ // is not modified if the following call fails.
+ UnicodeStrToAsciiStrS ((CHAR16*)PcdGetPtr (PcdFirmwareVersionString),
+ mBiosVersion, sizeof (mBiosVersion));
+
+ // Look for a "x.y" numeric string anywhere in mBiosVersion and
+ // try to parse it to populate the BIOS major and minor.
+ for (i = 0; (i < AsciiStrLen (mBiosVersion)) && (State < 4); i++) {
+ switch (State) {
+ case 0:
+ if (!SMB_IS_DIGIT (mBiosVersion[i]))
+ break;
+ Value[0] = Value[1] = 0;
+ State++;
+ // Fall through
+ case 1:
+ case 3:
+ if (SMB_IS_DIGIT (mBiosVersion[i])) {
+ Value[State / 2] = (Value[State / 2] * 10) + (mBiosVersion[i] - '0');
+ if (Value[State / 2] > 255) {
+ while (SMB_IS_DIGIT (mBiosVersion[i + 1]))
+ i++;
+ // Reset our state (we may have something like "Firmware X83737.1 v1.23")
+ State = 0;
+ }
+ } else {
+ State++;
+ }
+ if (State != 2)
+ break;
+ // Fall through
+ case 2:
+ if ((mBiosVersion[i] == '.') && (SMB_IS_DIGIT (mBiosVersion[i + 1]))) {
+ State++;
+ } else {
+ State = 0;
+ }
+ break;
+ }
+ }
+ if ((State == 3) || (State == 4)) {
+ mBIOSInfoType0.SystemBiosMajorRelease = (UINT8)Value[0];
+ mBIOSInfoType0.SystemBiosMinorRelease = (UINT8)Value[1];
+ }
+
LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER*)&mBIOSInfoType0, mBIOSInfoType0Strings, NULL);
}
@@ -631,7 +673,7 @@ I64ToHexString (
IN UINT64 Value
)
{
- static CHAR8 ItoH[] = { '0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F' };
+ STATIC CHAR8 ItoH[] = { '0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F' };
UINT8 StringInx;
INT8 NibbleInx;
@@ -664,34 +706,25 @@ SysInfoUpdateSmbiosType1 (
UINT32 BoardRevision = 0;
EFI_STATUS Status = EFI_SUCCESS;
UINT64 BoardSerial = 0;
- UINTN Prod = PROD_UNKNOWN;
- UINTN Manu = MANU_UNKNOWN;
+ INTN Prod = -1;
+ INTN Manu = -1;
Status = mFwProtocol->GetModelRevision (&BoardRevision);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Failed to get board model: %r\n", Status));
} else {
Prod = (BoardRevision >> 4) & 0xFF;
+ Manu = (BoardRevision >> 16) & 0x0F;
}
- if (Prod > PROD_KNOWN) {
- Prod = PROD_UNKNOWN;
- }
- Prod -= PROD_BASE;
- AsciiSPrint (mSysInfoProductName, sizeof (mSysInfoProductName),
- "64-bit Raspberry Pi %a (rev. %x)", ProductNames[Prod], BoardRevision);
-
- Manu = (BoardRevision >> 16) & 0xF;
- if (Manu > MANU_KNOWN) {
- Manu = MANU_UNKNOWN;
- } else {
- Manu += MANU_BASE;
- }
- AsciiSPrint (mSysInfoManufName, sizeof (mSysInfoManufName), "%a", ManufNames[Manu]);
+ AsciiStrCpyS (mSysInfoProductName, sizeof (mSysInfoProductName),
+ mFwProtocol->GetModelName (Prod));
+ AsciiStrCpyS (mSysInfoManufName, sizeof (mSysInfoManufName),
+ mFwProtocol->GetManufacturerName (Manu));
+ AsciiSPrint (mSysInfoVersionName, sizeof (mSysInfoVersionName),
+ "%X", BoardRevision);
- I64ToHexString (mSysInfoSKU,
- sizeof (mSysInfoSKU),
- BoardRevision);
+ I64ToHexString (mSysInfoSKU, sizeof (mSysInfoSKU), BoardRevision);
Status = mFwProtocol->GetSerial (&BoardSerial);
if (EFI_ERROR (Status)) {
@@ -702,9 +735,11 @@ SysInfoUpdateSmbiosType1 (
DEBUG ((DEBUG_ERROR, "Board Serial Number: %a\n", mSysInfoSerial));
- mSysInfoType1.Uuid.Data1 = *(UINT32*)"RPi3";
- mSysInfoType1.Uuid.Data2 = 0x0;
- mSysInfoType1.Uuid.Data3 = 0x0;
+ mSysInfoType1.Uuid.Data1 = BoardRevision;
+ mSysInfoType1.Uuid.Data2 = 0;
+ mSysInfoType1.Uuid.Data3 = 0;
+ // Swap endianness, so that the serial is more user-friendly as a UUID
+ BoardSerial = SwapBytes64 (BoardSerial);
CopyMem (mSysInfoType1.Uuid.Data4, &BoardSerial, sizeof (BoardSerial));
LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER*)&mSysInfoType1, mSysInfoType1Strings, NULL);
@@ -763,6 +798,8 @@ ProcessorInfoUpdateSmbiosType4 (
DEBUG ((DEBUG_INFO, "Current CPU speed: %uHz\n", Rate));
}
+ AsciiStrCpyS (mCpuName, sizeof (mCpuName), mFwProtocol->GetCpuName (-1));
+
LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER*)&mProcessorInfoType4, mProcessorInfoType4Strings, NULL);
}
diff --git a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
index f7c74f7f5456..fde194ea5d90 100644
--- a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
+++ b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
@@ -48,3 +48,4 @@ [Depex]
[Pcd]
gArmTokenSpaceGuid.PcdSystemMemorySize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
diff --git a/Platform/RaspberryPi/RPi3/RPi3.dsc b/Platform/RaspberryPi/RPi3/RPi3.dsc
index 2b9e619ad55c..138d3691dc56 100644
--- a/Platform/RaspberryPi/RPi3/RPi3.dsc
+++ b/Platform/RaspberryPi/RPi3/RPi3.dsc
@@ -309,7 +309,7 @@ [PcdsFixedAtBuild.common]
gEmbeddedTokenSpaceGuid.PcdDmaDeviceOffset|0xc0000000
- gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"edk2-1.0"
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"EDK2-DEV"
!if $(SECURE_BOOT_ENABLE) == TRUE
# override the default values from SecurityPkg to ensure images from all sources are verified in secure boot
--
2.21.0.windows.1
next prev parent reply other threads:[~2019-09-04 12:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 12:14 [edk2-platforms PATCH 0/2] Platform/RPi3: PlatformSmbios improvements Pete Batard
2019-09-04 12:14 ` [edk2-platforms PATCH 1/2] Platform/RPi3: Add more query functions in RpiFirmwareDxe Pete Batard
2019-09-27 18:34 ` Leif Lindholm
2019-09-04 12:14 ` Pete Batard [this message]
2019-09-27 19:03 ` [edk2-platforms PATCH 2/2] Platform/RPi3: Improve the population of PlatformSmbiosDxe elements Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190904121418.3700-3-pete@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox