* [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol
@ 2019-09-06 22:12 Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out Zurcher, Christopher J
` (5 more replies)
0 siblings, 6 replies; 8+ messages in thread
From: Zurcher, Christopher J @ 2019-09-06 22:12 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Jiewen Yao, Jian J Wang, Liming Gao, Hao A Wu
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
V6 changes:
Restore EFI_SCSI_TYPE defines for ASC IT8 devices. Revert EFI_SCSI_IO_TYPE
changes in Protocol\ScsiIo.h. Add INC_512 parameter for SecurityProtocol
In/Out commands in UefiScsiLib. Change UINT32 args to UINTN to match the
definitions for Storage Security Command Protocol.
V5 changes:
Split MdeModulePkg changes into separate patches. Add ReinstallProtocol
calls for StorageSecurityCommand Protocol. Restore original MediaPresent
and ReadCapacity behavior, with new implementation for WLUN type media.
Clear temporary aligned buffers before freeing them.
V4 changes:
Add SSC Protocol in addition to BlockIo instead of in place of BlockIo.
Add error handling for (BlockSize == 0) in Read and WriteBlocks commands
to handle partitions that do not support ReadCapacity().
V3 changes:
Initialize AlignedBuffer variable in ScsiDiskReceiveData and
ScsiDiskSendData functions. Remove redundant input validation and debug
message in ScsiDiskSendData.
V2 changes:
Split the patch into separate commits for separate packages.
To support RPMB access on UFS devices, support must be added to
the ScsiDiskDxe driver for the Storage Security Command Protocol.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Christopher J Zurcher (4):
MdePkg: Implement SCSI commands for Security Protocol In/Out
MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun)
MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check
MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 3 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 171 +++++-
MdePkg/Include/IndustryStandard/Scsi.h | 48 +-
MdePkg/Include/Library/UefiScsiLib.h | 128 +++-
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c | 5 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 616 +++++++++++++++++++-
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 17 +-
MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 217 ++++++-
8 files changed, 1167 insertions(+), 38 deletions(-)
--
2.16.2.windows.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
@ 2019-09-06 22:12 ` Zurcher, Christopher J
2019-09-09 7:05 ` [edk2-devel] " Wu, Hao A
2019-09-06 22:12 ` [PATCH v6 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun) Zurcher, Christopher J
` (4 subsequent siblings)
5 siblings, 1 reply; 8+ messages in thread
From: Zurcher, Christopher J @ 2019-09-06 22:12 UTC (permalink / raw)
To: devel; +Cc: Jiewen Yao, Jian J Wang, Liming Gao
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
This patch implements the Security Protocol In and Security Protocol Out
commands in UefiScsiLib to prepare support for the Storage Security
Command Protocol.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdePkg/Include/IndustryStandard/Scsi.h | 48 +++--
MdePkg/Include/Library/UefiScsiLib.h | 128 +++++++++++-
MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 217 +++++++++++++++++++-
3 files changed, 374 insertions(+), 19 deletions(-)
diff --git a/MdePkg/Include/IndustryStandard/Scsi.h b/MdePkg/Include/IndustryStandard/Scsi.h
index cbe5709fe5..d03886417f 100644
--- a/MdePkg/Include/IndustryStandard/Scsi.h
+++ b/MdePkg/Include/IndustryStandard/Scsi.h
@@ -1,7 +1,7 @@
/** @file
Support for SCSI-2 standard
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -163,6 +163,12 @@
#define EFI_SCSI_OP_SEND_MESSAGE10 0x2a
#define EFI_SCSI_OP_SEND_MESSAGE12 0xaa
+//
+// Additional commands for Secure Transactions
+//
+#define EFI_SCSI_OP_SECURITY_PROTOCOL_IN 0xa2
+#define EFI_SCSI_OP_SECURITY_PROTOCOL_OUT 0xb5
+
//
// SCSI Data Transfer Direction
//
@@ -172,22 +178,30 @@
//
// Peripheral Device Type Definitions
//
-#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g. magnetic disk)
-#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g. magnetic tape)
-#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
-#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
-#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some optical disks)
-#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD-ROM device
-#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device
-#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g. some optical disks)
-#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer device (e.g. jukeboxes)
-#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications device
-#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic arts pre-press devices)
-#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic arts pre-press devices)
-//
-// 0Ch - 1Eh are reserved
-//
-#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device type
+#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g. magnetic disk)
+#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g. magnetic tape)
+#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
+#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
+#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some optical disks)
+#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD/DVD device
+#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device (obsolete)
+#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g. some optical disks)
+#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer device (e.g. jukeboxes)
+#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications device (obsolete)
+#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic arts pre-press devices)
+#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic arts pre-press devices)
+#define EFI_SCSI_TYPE_RAID 0x0C ///< Storage array controller device (e.g., RAID)
+#define EFI_SCSI_TYPE_SES 0x0D ///< Enclosure services device
+#define EFI_SCSI_TYPE_RBC 0x0E ///< Simplified direct-access device (e.g., magnetic disk)
+#define EFI_SCSI_TYPE_OCRW 0x0F ///< Optical card reader/writer device
+#define EFI_SCSI_TYPE_BRIDGE 0x10 ///< Bridge Controller Commands
+#define EFI_SCSI_TYPE_OSD 0x11 ///< Object-based Storage Device
+#define EFI_SCSI_TYPE_AUTOMATION 0x12 ///< Automation/Drive Interface
+#define EFI_SCSI_TYPE_SECURITYMANAGER 0x13 ///< Security manager device
+#define EFI_SCSI_TYPE_RESERVED_LOW 0x14 ///< Reserved (low)
+#define EFI_SCSI_TYPE_RESERVED_HIGH 0x1D ///< Reserved (high)
+#define EFI_SCSI_TYPE_WLUN 0x1E ///< Well known logical unit
+#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device type
//
// Page Codes for INQUIRY command
diff --git a/MdePkg/Include/Library/UefiScsiLib.h b/MdePkg/Include/Library/UefiScsiLib.h
index 10dd81902b..5c94b0aa16 100644
--- a/MdePkg/Include/Library/UefiScsiLib.h
+++ b/MdePkg/Include/Library/UefiScsiLib.h
@@ -5,7 +5,7 @@
for hard drive, CD and DVD devices that are the most common SCSI boot targets used by UEFI platforms.
This library class depends on SCSI I/O Protocol defined in UEFI Specification and SCSI-2 industry standard.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -813,6 +813,132 @@ ScsiWrite16Command (
);
+/**
+ Execute Security Protocol In SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol In command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If TransferLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed in 512-byte increments.
+ @param[in] DataLength The size in bytes of the data buffer.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+ @param[out] TransferLength A pointer to a buffer to store the size in
+ bytes of the data written to the data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in TransferLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolInCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ OUT UINTN *TransferLength
+ );
+
+
+/**
+ Execute Security Protocol Out SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol Out command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed in 512-byte increments.
+ @param[in] DataLength The size in bytes of the transfer data.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolOutCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer OPTIONAL
+ );
+
+
/**
Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI
target.
diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
index c7491d1436..229fe11ef2 100644
--- a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
+++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
@@ -1,7 +1,7 @@
/** @file
UEFI SCSI Library implementation
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -23,6 +23,7 @@
//
#define EFI_SCSI_OP_LENGTH_SIX 0x6
#define EFI_SCSI_OP_LENGTH_TEN 0xa
+#define EFI_SCSI_OP_LENGTH_TWELVE 0xc
#define EFI_SCSI_OP_LENGTH_SIXTEEN 0x10
//
@@ -1280,6 +1281,220 @@ ScsiWrite16Command (
}
+/**
+ Execute Security Protocol In SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol In command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If TransferLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed in 512-byte increments.
+ @param[in] DataLength The size in bytes of the data buffer.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+ @param[out] TransferLength A pointer to a buffer to store the size in
+ bytes of the data written to the data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in TransferLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolInCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ OUT UINTN *TransferLength
+ )
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ EFI_STATUS Status;
+ UINT8 Cdb[EFI_SCSI_OP_LENGTH_TWELVE];
+
+ ASSERT (SenseDataLength != NULL);
+ ASSERT (HostAdapterStatus != NULL);
+ ASSERT (TargetStatus != NULL);
+ ASSERT (ScsiIo != NULL);
+ ASSERT (TransferLength != NULL);
+ ASSERT (DataLength <= MAX_UINT32);
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_TWELVE);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.InTransferLength = (UINT32) DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Security Protocol In Command
+ //
+ Cdb[0] = EFI_SCSI_OP_SECURITY_PROTOCOL_IN;
+ Cdb[1] = SecurityProtocol;
+ WriteUnaligned16 ((UINT16 *)&Cdb[2], SwapBytes16 (SecurityProtocolSpecific));
+ WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength));
+
+ if (Inc512) {
+ Cdb[4] = BIT7;
+ }
+
+ CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TWELVE;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *TransferLength = (UINTN) CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+
+/**
+ Execute Security Protocol Out SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol Out command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed in 512-byte increments.
+ @param[in] DataLength The size in bytes of the transfer data.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolOutCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer OPTIONAL
+ )
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ EFI_STATUS Status;
+ UINT8 Cdb[EFI_SCSI_OP_LENGTH_TWELVE];
+
+ ASSERT (SenseDataLength != NULL);
+ ASSERT (HostAdapterStatus != NULL);
+ ASSERT (TargetStatus != NULL);
+ ASSERT (ScsiIo != NULL);
+ ASSERT (DataLength <= MAX_UINT32);
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_TWELVE);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.OutDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.OutTransferLength = (UINT32) DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Security Protocol Out Command
+ //
+ Cdb[0] = EFI_SCSI_OP_SECURITY_PROTOCOL_OUT;
+ Cdb[1] = SecurityProtocol;
+ WriteUnaligned16 ((UINT16 *)&Cdb[2], SwapBytes16 (SecurityProtocolSpecific));
+ WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength));
+
+ if (Inc512) {
+ Cdb[4] = BIT7;
+ }
+
+ CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TWELVE;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_OUT;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+
+ return Status;
+}
+
+
/**
Internal helper notify function in which update the result of the
non-blocking SCSI Read/Write commands and signal caller event.
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v6 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun)
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out Zurcher, Christopher J
@ 2019-09-06 22:12 ` Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 3/4] MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check Zurcher, Christopher J
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Zurcher, Christopher J @ 2019-09-06 22:12 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Jiewen Yao, Jian J Wang, Liming Gao
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
Currently UfsPassThru only checks for 8 common LUNs. This adds a check
for the RPMB Well-known LUN and sets the corresponding bit-mask. Further
handling of the WLUN is already present in the driver.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
index b12404aacb..26c5a8b855 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
@@ -822,7 +822,9 @@ UfsPassThruDriverBindingStart (
UINTN UfsHcBase;
UINT32 Index;
UFS_UNIT_DESC UnitDescriptor;
+ UFS_DEV_DESC DeviceDescriptor;
UINT32 UnitDescriptorSize;
+ UINT32 DeviceDescriptorSize;
Status = EFI_SUCCESS;
UfsHc = NULL;
@@ -916,7 +918,6 @@ UfsPassThruDriverBindingStart (
//
// Check if 8 common luns are active and set corresponding bit mask.
- // TODO: Parse device descriptor to decide if exposing RPMB LUN to upper layer for authentication access.
//
UnitDescriptorSize = sizeof (UFS_UNIT_DESC);
for (Index = 0; Index < 8; Index++) {
@@ -931,6 +932,20 @@ UfsPassThruDriverBindingStart (
}
}
+ //
+ // Check if RPMB WLUN is supported and set corresponding bit mask.
+ //
+ DeviceDescriptorSize = sizeof (UFS_DEV_DESC);
+ Status = UfsRwDeviceDesc (Private, TRUE, UfsDeviceDesc, 0, 0, &DeviceDescriptor, &DeviceDescriptorSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to read device descriptor, status = %r\n", Status));
+ } else {
+ if (DeviceDescriptor.SecurityLun == 0x1) {
+ DEBUG ((DEBUG_INFO, "UFS WLUN RPMB is supported\n"));
+ Private->Luns.BitMask |= BIT11;
+ }
+ }
+
//
// Start the asynchronous interrupt monitor
//
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v6 3/4] MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun) Zurcher, Christopher J
@ 2019-09-06 22:12 ` Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 4/4] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol Zurcher, Christopher J
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Zurcher, Christopher J @ 2019-09-06 22:12 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Jiewen Yao, Jian J Wang, Liming Gao
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
Replacing "magic numbers" in the Peripheral Type check with defines for
the reserved range from IndustryStandard/Scsi.h
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
index c4069aec0f..1caffd38cd 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
@@ -2,7 +2,7 @@
SCSI Bus driver that layers on every SCSI Pass Thru and
Extended SCSI Pass Thru protocol in the system.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -1368,7 +1368,8 @@ DiscoverScsiDevice (
goto Done;
}
- if (0x1e >= InquiryData->Peripheral_Type && InquiryData->Peripheral_Type >= 0xa) {
+ if ((InquiryData->Peripheral_Type >= EFI_SCSI_TYPE_RESERVED_LOW) &&
+ (InquiryData->Peripheral_Type <= EFI_SCSI_TYPE_RESERVED_HIGH)) {
ScsiDeviceFound = FALSE;
goto Done;
}
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v6 4/4] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
` (2 preceding siblings ...)
2019-09-06 22:12 ` [PATCH v6 3/4] MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check Zurcher, Christopher J
@ 2019-09-06 22:12 ` Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v5 0/4] Add SCSI Support for " Zurcher, Christopher J
2019-09-09 7:02 ` [edk2-devel] [PATCH v6 " Wu, Hao A
5 siblings, 0 replies; 8+ messages in thread
From: Zurcher, Christopher J @ 2019-09-06 22:12 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Jiewen Yao, Jian J Wang, Liming Gao
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
This patch implements the EFI_STORAGE_SECURITY_COMMAND_PROTOCOL in the
ScsiDiskDxe driver.
Support is currently limited to the RPMB Well-known LUN for UFS devices.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 3 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 171 +++++-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 616 +++++++++++++++++++-
3 files changed, 774 insertions(+), 16 deletions(-)
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
index 5500d828e9..40818e669b 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
@@ -3,7 +3,7 @@
# It detects the SCSI disk media and installs Block I/O and Block I/O2 Protocol on
# the device handle.
#
-# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
@@ -52,6 +52,7 @@
gEfiBlockIoProtocolGuid ## BY_START
gEfiBlockIo2ProtocolGuid ## BY_START
gEfiEraseBlockProtocolGuid ## BY_START
+ gEfiStorageSecurityCommandProtocolGuid ## BY_START
gEfiScsiIoProtocolGuid ## TO_START
gEfiScsiPassThruProtocolGuid ## TO_START
gEfiExtScsiPassThruProtocolGuid ## TO_START
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
index 42c0aaaa95..2d8679ec6f 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
@@ -1,7 +1,7 @@
/** @file
Header file for SCSI Disk Driver.
-Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -22,6 +22,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/ScsiPassThruExt.h>
#include <Protocol/ScsiPassThru.h>
#include <Protocol/DiskInfo.h>
+#include <Protocol/StorageSecurityCommand.h>
#include <Library/DebugLib.h>
@@ -38,6 +39,10 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#define IS_DEVICE_FIXED(a) (a)->FixedDevice ? 1 : 0
+#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0)
+
+#define UFS_WLUN_RPMB 0xC4
+
typedef struct {
UINT32 MaxLbaCnt;
UINT32 MaxBlkDespCnt;
@@ -51,6 +56,8 @@ typedef struct {
EFI_HANDLE Handle;
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL StorageSecurity;
+
EFI_BLOCK_IO_PROTOCOL BlkIo;
EFI_BLOCK_IO2_PROTOCOL BlkIo2;
EFI_BLOCK_IO_MEDIA BlkIoMedia;
@@ -95,6 +102,7 @@ typedef struct {
#define SCSI_DISK_DEV_FROM_BLKIO(a) CR (a, SCSI_DISK_DEV, BlkIo, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_BLKIO2(a) CR (a, SCSI_DISK_DEV, BlkIo2, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_ERASEBLK(a) CR (a, SCSI_DISK_DEV, EraseBlock, SCSI_DISK_DEV_SIGNATURE)
+#define SCSI_DISK_DEV_FROM_STORSEC(a) CR (a, SCSI_DISK_DEV, StorageSecurity, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_DISKINFO(a) CR (a, SCSI_DISK_DEV, DiskInfo, SCSI_DISK_DEV_SIGNATURE)
@@ -638,6 +646,151 @@ ScsiDiskEraseBlocks (
);
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ );
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskSendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer
+ );
+
+
/**
Provides inquiry information for the controller type.
@@ -1428,4 +1581,20 @@ DetermineInstallEraseBlock (
IN EFI_HANDLE ChildHandle
);
+/**
+ Determine if EFI Storage Security Command Protocol should be produced.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Handle of device.
+
+ @retval TRUE Should produce EFI Storage Security Command Protocol.
+ @retval FALSE Should not produce EFI Storage Security Command Protocol.
+
+**/
+BOOLEAN
+DetermineInstallStorageSecurity (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ );
+
#endif
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
index fbdf927a11..6bfcf03a4b 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
@@ -1,7 +1,7 @@
/** @file
SCSI disk driver that layers on every SCSI IO protocol in the system.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -151,7 +151,9 @@ ScsiDiskDriverBindingSupported (
Status = ScsiIo->GetDeviceType (ScsiIo, &DeviceType);
if (!EFI_ERROR (Status)) {
- if ((DeviceType == EFI_SCSI_TYPE_DISK) || (DeviceType == EFI_SCSI_TYPE_CDROM)) {
+ if ((DeviceType == EFI_SCSI_TYPE_DISK) ||
+ (DeviceType == EFI_SCSI_TYPE_CDROM) ||
+ (DeviceType == EFI_SCSI_TYPE_WLUN)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_UNSUPPORTED;
@@ -238,6 +240,8 @@ ScsiDiskDriverBindingStart (
ScsiDiskDevice->BlkIo2.ReadBlocksEx = ScsiDiskReadBlocksEx;
ScsiDiskDevice->BlkIo2.WriteBlocksEx = ScsiDiskWriteBlocksEx;
ScsiDiskDevice->BlkIo2.FlushBlocksEx = ScsiDiskFlushBlocksEx;
+ ScsiDiskDevice->StorageSecurity.ReceiveData = ScsiDiskReceiveData;
+ ScsiDiskDevice->StorageSecurity.SendData = ScsiDiskSendData;
ScsiDiskDevice->EraseBlock.Revision = EFI_ERASE_BLOCK_PROTOCOL_REVISION;
ScsiDiskDevice->EraseBlock.EraseLengthGranularity = 1;
ScsiDiskDevice->EraseBlock.EraseBlocks = ScsiDiskEraseBlocks;
@@ -258,6 +262,10 @@ ScsiDiskDriverBindingStart (
ScsiDiskDevice->BlkIo.Media->ReadOnly = TRUE;
MustReadCapacity = FALSE;
break;
+
+ case EFI_SCSI_TYPE_WLUN:
+ MustReadCapacity = FALSE;
+ break;
}
//
// The Sense Data Array's initial size is 6
@@ -309,8 +317,8 @@ ScsiDiskDriverBindingStart (
// Determine if Block IO & Block IO2 should be produced on this controller
// handle
//
- if (DetermineInstallBlockIo(Controller)) {
- InitializeInstallDiskInfo(ScsiDiskDevice, Controller);
+ if (DetermineInstallBlockIo (Controller)) {
+ InitializeInstallDiskInfo (ScsiDiskDevice, Controller);
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiBlockIoProtocolGuid,
@@ -321,16 +329,27 @@ ScsiDiskDriverBindingStart (
&ScsiDiskDevice->DiskInfo,
NULL
);
- if (!EFI_ERROR(Status)) {
- if (DetermineInstallEraseBlock(ScsiDiskDevice, Controller)) {
+ if (!EFI_ERROR (Status)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, Controller)) {
Status = gBS->InstallProtocolInterface (
&Controller,
&gEfiEraseBlockProtocolGuid,
EFI_NATIVE_INTERFACE,
&ScsiDiskDevice->EraseBlock
);
- if (EFI_ERROR(Status)) {
- DEBUG ((EFI_D_ERROR, "ScsiDisk: Failed to install the Erase Block Protocol! Status = %r\n", Status));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "ScsiDisk: Failed to install the Erase Block Protocol! Status = %r\n", Status));
+ }
+ }
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, Controller)) {
+ Status = gBS->InstallProtocolInterface (
+ &Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "ScsiDisk: Failed to install the Storage Security Command Protocol! Status = %r\n", Status));
}
}
ScsiDiskDevice->ControllerNameTable = NULL;
@@ -585,7 +604,7 @@ ScsiDiskReadBlocks (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -593,6 +612,14 @@ ScsiDiskReadBlocks (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -606,6 +633,11 @@ ScsiDiskReadBlocks (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -721,7 +753,7 @@ ScsiDiskWriteBlocks (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -729,6 +761,14 @@ ScsiDiskWriteBlocks (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -742,6 +782,11 @@ ScsiDiskWriteBlocks (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -947,7 +992,7 @@ ScsiDiskReadBlocksEx (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -955,6 +1000,14 @@ ScsiDiskReadBlocksEx (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -968,6 +1021,11 @@ ScsiDiskReadBlocksEx (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -1110,7 +1168,7 @@ ScsiDiskWriteBlocksEx (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -1118,6 +1176,14 @@ ScsiDiskWriteBlocksEx (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -1131,6 +1197,11 @@ ScsiDiskWriteBlocksEx (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -1263,7 +1334,7 @@ ScsiDiskFlushBlocksEx (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -1271,6 +1342,14 @@ ScsiDiskFlushBlocksEx (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -1644,7 +1723,7 @@ ScsiDiskEraseBlocks (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -1652,6 +1731,14 @@ ScsiDiskEraseBlocks (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
Status = EFI_MEDIA_CHANGED;
goto Done;
}
@@ -1708,6 +1795,431 @@ Done:
return Status;
}
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ BOOLEAN MediaChange;
+ EFI_TPL OldTpl;
+ UINT8 SenseDataLength;
+ UINT8 HostAdapterStatus;
+ UINT8 TargetStatus;
+ VOID *AlignedBuffer;
+ BOOLEAN AlignedBufferAllocated;
+
+ AlignedBuffer = NULL;
+ MediaChange = FALSE;
+ AlignedBufferAllocated = FALSE;
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_STORSEC (This);
+ Media = ScsiDiskDevice->BlkIo.Media;
+
+ SenseDataLength = (UINT8) (ScsiDiskDevice->SenseDataNumber * sizeof (EFI_SCSI_SENSE_DATA));
+
+ if (!IS_DEVICE_FIXED (ScsiDiskDevice)) {
+ Status = ScsiDiskDetectMedia (ScsiDiskDevice, FALSE, &MediaChange);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ if (MediaChange) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIoProtocolGuid,
+ &ScsiDiskDevice->BlkIo,
+ &ScsiDiskDevice->BlkIo
+ );
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIo2ProtocolGuid,
+ &ScsiDiskDevice->BlkIo2,
+ &ScsiDiskDevice->BlkIo2
+ );
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiEraseBlockProtocolGuid,
+ &ScsiDiskDevice->EraseBlock,
+ &ScsiDiskDevice->EraseBlock
+ );
+ }
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
+ if (Media->MediaPresent) {
+ Status = EFI_MEDIA_CHANGED;
+ } else {
+ Status = EFI_NO_MEDIA;
+ }
+ goto Done;
+ }
+ }
+
+ //
+ // Validate Media
+ //
+ if (!(Media->MediaPresent)) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+
+ if ((MediaId != 0) && (MediaId != Media->MediaId)) {
+ Status = EFI_MEDIA_CHANGED;
+ goto Done;
+ }
+
+ if (PayloadBufferSize != 0) {
+ if ((PayloadBuffer == NULL) || (PayloadTransferSize == NULL)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ if ((ScsiDiskDevice->ScsiIo->IoAlign > 1) && !IS_ALIGNED (PayloadBuffer, ScsiDiskDevice->ScsiIo->IoAlign)) {
+ AlignedBuffer = AllocateAlignedBuffer (ScsiDiskDevice, PayloadBufferSize);
+ if (AlignedBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ AlignedBufferAllocated = TRUE;
+ } else {
+ AlignedBuffer = PayloadBuffer;
+ }
+ }
+
+ Status = ScsiSecurityProtocolInCommand (
+ ScsiDiskDevice->ScsiIo,
+ Timeout,
+ ScsiDiskDevice->SenseData,
+ &SenseDataLength,
+ &HostAdapterStatus,
+ &TargetStatus,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ FALSE,
+ PayloadBufferSize,
+ AlignedBuffer,
+ PayloadTransferSize
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ if (AlignedBufferAllocated) {
+ CopyMem (PayloadBuffer, AlignedBuffer, PayloadBufferSize);
+ }
+
+ if (PayloadBufferSize < *PayloadTransferSize) {
+ Status = EFI_WARN_BUFFER_TOO_SMALL;
+ goto Done;
+ }
+
+ Status = CheckHostAdapterStatus (HostAdapterStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckTargetStatus (TargetStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (AlignedBufferAllocated) {
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ FreeAlignedBuffer (AlignedBuffer, PayloadBufferSize);
+ }
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskSendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ BOOLEAN MediaChange;
+ EFI_TPL OldTpl;
+ UINT8 SenseDataLength;
+ UINT8 HostAdapterStatus;
+ UINT8 TargetStatus;
+ VOID *AlignedBuffer;
+ BOOLEAN AlignedBufferAllocated;
+
+ AlignedBuffer = NULL;
+ MediaChange = FALSE;
+ AlignedBufferAllocated = FALSE;
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_STORSEC (This);
+ Media = ScsiDiskDevice->BlkIo.Media;
+
+ SenseDataLength = (UINT8) (ScsiDiskDevice->SenseDataNumber * sizeof (EFI_SCSI_SENSE_DATA));
+
+ if (!IS_DEVICE_FIXED (ScsiDiskDevice)) {
+ Status = ScsiDiskDetectMedia (ScsiDiskDevice, FALSE, &MediaChange);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ if (MediaChange) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIoProtocolGuid,
+ &ScsiDiskDevice->BlkIo,
+ &ScsiDiskDevice->BlkIo
+ );
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIo2ProtocolGuid,
+ &ScsiDiskDevice->BlkIo2,
+ &ScsiDiskDevice->BlkIo2
+ );
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiEraseBlockProtocolGuid,
+ &ScsiDiskDevice->EraseBlock,
+ &ScsiDiskDevice->EraseBlock
+ );
+ }
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
+ if (Media->MediaPresent) {
+ Status = EFI_MEDIA_CHANGED;
+ } else {
+ Status = EFI_NO_MEDIA;
+ }
+ goto Done;
+ }
+ }
+
+ //
+ // Validate Media
+ //
+ if (!(Media->MediaPresent)) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+
+ if ((MediaId != 0) && (MediaId != Media->MediaId)) {
+ Status = EFI_MEDIA_CHANGED;
+ goto Done;
+ }
+
+ if (Media->ReadOnly) {
+ Status = EFI_WRITE_PROTECTED;
+ goto Done;
+ }
+
+ if (PayloadBufferSize != 0) {
+ if (PayloadBuffer == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ if ((ScsiDiskDevice->ScsiIo->IoAlign > 1) && !IS_ALIGNED (PayloadBuffer, ScsiDiskDevice->ScsiIo->IoAlign)) {
+ AlignedBuffer = AllocateAlignedBuffer (ScsiDiskDevice, PayloadBufferSize);
+ if (AlignedBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ CopyMem (AlignedBuffer, PayloadBuffer, PayloadBufferSize);
+ AlignedBufferAllocated = TRUE;
+ } else {
+ AlignedBuffer = PayloadBuffer;
+ }
+ }
+
+ Status = ScsiSecurityProtocolOutCommand (
+ ScsiDiskDevice->ScsiIo,
+ Timeout,
+ ScsiDiskDevice->SenseData,
+ &SenseDataLength,
+ &HostAdapterStatus,
+ &TargetStatus,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ FALSE,
+ PayloadBufferSize,
+ AlignedBuffer
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckHostAdapterStatus (HostAdapterStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckTargetStatus (TargetStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (AlignedBufferAllocated) {
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ FreeAlignedBuffer (AlignedBuffer, PayloadBufferSize);
+ }
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
/**
Detect Device and read out capacity ,if error occurs, parse the sense key.
@@ -1812,6 +2324,15 @@ ScsiDiskDetectMedia (
NeedReadCapacity = TRUE;
}
+ //
+ // READ_CAPACITY command is not supported by any of the UFS WLUNs.
+ //
+ if (ScsiDiskDevice->DeviceType == EFI_SCSI_TYPE_WLUN) {
+ NeedReadCapacity = FALSE;
+ MustReadCapacity = FALSE;
+ ScsiDiskDevice->BlkIo.Media->MediaPresent = TRUE;
+ }
+
//
// either NeedReadCapacity is TRUE, or MustReadCapacity is TRUE,
// retrieve capacity via Read Capacity command
@@ -5358,6 +5879,14 @@ DetermineInstallEraseBlock (
RetVal = TRUE;
CapacityData16 = NULL;
+ //
+ // UNMAP command is not supported by any of the UFS WLUNs.
+ //
+ if (ScsiDiskDevice->DeviceType == EFI_SCSI_TYPE_WLUN) {
+ RetVal = FALSE;
+ goto Done;
+ }
+
Status = gBS->HandleProtocol (
ChildHandle,
&gEfiDevicePathProtocolGuid,
@@ -5460,6 +5989,65 @@ Done:
return RetVal;
}
+/**
+ Determine if EFI Storage Security Command Protocol should be produced.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Handle of device.
+
+ @retval TRUE Should produce EFI Storage Security Command Protocol.
+ @retval FALSE Should not produce EFI Storage Security Command Protocol.
+
+**/
+BOOLEAN
+DetermineInstallStorageSecurity (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ )
+{
+ EFI_STATUS Status;
+ UFS_DEVICE_PATH *UfsDevice;
+ BOOLEAN RetVal;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathNode;
+
+ UfsDevice = NULL;
+ RetVal = TRUE;
+
+ Status = gBS->HandleProtocol (
+ ChildHandle,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &DevicePathNode
+ );
+ //
+ // Device Path protocol must be installed on the device handle.
+ //
+ ASSERT_EFI_ERROR (Status);
+
+ while (!IsDevicePathEndType (DevicePathNode)) {
+ //
+ // For now, only support Storage Security Command Protocol on UFS devices.
+ //
+ if ((DevicePathNode->Type == MESSAGING_DEVICE_PATH) &&
+ (DevicePathNode->SubType == MSG_UFS_DP)) {
+ UfsDevice = (UFS_DEVICE_PATH *) DevicePathNode;
+ break;
+ }
+
+ DevicePathNode = NextDevicePathNode (DevicePathNode);
+ }
+ if (UfsDevice == NULL) {
+ RetVal = FALSE;
+ goto Done;
+ }
+
+ if (UfsDevice->Lun != UFS_WLUN_RPMB) {
+ RetVal = FALSE;
+ }
+
+Done:
+ return RetVal;
+}
+
/**
Provides inquiry information for the controller type.
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v5 0/4] Add SCSI Support for Storage Security Command Protocol
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
` (3 preceding siblings ...)
2019-09-06 22:12 ` [PATCH v6 4/4] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol Zurcher, Christopher J
@ 2019-09-06 22:12 ` Zurcher, Christopher J
2019-09-09 7:02 ` [edk2-devel] [PATCH v6 " Wu, Hao A
5 siblings, 0 replies; 8+ messages in thread
From: Zurcher, Christopher J @ 2019-09-06 22:12 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Jiewen Yao, Jian J Wang, Liming Gao, Hao A Wu
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
V5 changes:
Split MdeModulePkg changes into separate patches. Add ReinstallProtocol
calls for StorageSecurityCommand Protocol. Restore original MediaPresent
and ReadCapacity behavior, with new implementation for WLUN type media.
Clear temporary aligned buffers before freeing them.
V4 changes:
Add SSC Protocol in addition to BlockIo instead of in place of BlockIo.
Add error handling for (BlockSize == 0) in Read and WriteBlocks commands
to handle partitions that do not support ReadCapacity().
V3 changes:
Initialize AlignedBuffer variable in ScsiDiskReceiveData and
ScsiDiskSendData functions. Remove redundant input validation and debug
message in ScsiDiskSendData.
V2 changes:
Split the patch into separate commits for separate packages.
To support RPMB access on UFS devices, support must be added to
the ScsiDiskDxe driver for the Storage Security Command Protocol.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Christopher J Zurcher (4):
MdePkg: Implement SCSI commands for Security Protocol In/Out
MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun)
MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check
MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 3 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 171 +++++-
MdePkg/Include/IndustryStandard/Scsi.h | 48 +-
MdePkg/Include/Library/UefiScsiLib.h | 126 +++-
MdePkg/Include/Protocol/ScsiIo.h | 9 +-
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c | 5 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 614 +++++++++++++++++++-
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 17 +-
MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 205 ++++++-
9 files changed, 1157 insertions(+), 41 deletions(-)
--
2.16.2.windows.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
` (4 preceding siblings ...)
2019-09-06 22:12 ` [PATCH v5 0/4] Add SCSI Support for " Zurcher, Christopher J
@ 2019-09-09 7:02 ` Wu, Hao A
5 siblings, 0 replies; 8+ messages in thread
From: Wu, Hao A @ 2019-09-09 7:02 UTC (permalink / raw)
To: devel@edk2.groups.io, Zurcher, Christopher J, Gao, Liming,
Kinney, Michael D
Cc: Yao, Jiewen, Wang, Jian J
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Zurcher, Christopher J
> Sent: Saturday, September 07, 2019 6:12 AM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D; Yao, Jiewen; Wang, Jian J; Gao, Liming; Wu, Hao A
> Subject: [edk2-devel] [PATCH v6 0/4] Add SCSI Support for Storage Security
> Command Protocol
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
>
> V6 changes:
> Restore EFI_SCSI_TYPE defines for ASC IT8 devices. Revert EFI_SCSI_IO_TYPE
> changes in Protocol\ScsiIo.h. Add INC_512 parameter for SecurityProtocol
> In/Out commands in UefiScsiLib. Change UINT32 args to UINTN to match the
> definitions for Storage Security Command Protocol.
>
> V5 changes:
> Split MdeModulePkg changes into separate patches. Add ReinstallProtocol
> calls for StorageSecurityCommand Protocol. Restore original MediaPresent
> and ReadCapacity behavior, with new implementation for WLUN type media.
> Clear temporary aligned buffers before freeing them.
>
> V4 changes:
> Add SSC Protocol in addition to BlockIo instead of in place of BlockIo.
> Add error handling for (BlockSize == 0) in Read and WriteBlocks commands
> to handle partitions that do not support ReadCapacity().
>
> V3 changes:
> Initialize AlignedBuffer variable in ScsiDiskReceiveData and
> ScsiDiskSendData functions. Remove redundant input validation and debug
> message in ScsiDiskSendData.
>
> V2 changes:
> Split the patch into separate commits for separate packages.
>
> To support RPMB access on UFS devices, support must be added to
> the ScsiDiskDxe driver for the Storage Security Command Protocol.
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Hao A Wu <hao.a.wu@intel.com>
>
> Christopher J Zurcher (4):
> MdePkg: Implement SCSI commands for Security Protocol In/Out
> MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun)
> MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check
> MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol
For the MdeModulePkg changes (patch 2 to 4):
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Best Regards,
Hao Wu
>
> MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 3 +-
> MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 171 +++++-
> MdePkg/Include/IndustryStandard/Scsi.h | 48 +-
> MdePkg/Include/Library/UefiScsiLib.h | 128 +++-
> MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c | 5 +-
> MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 616
> +++++++++++++++++++-
> MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c | 17 +-
> MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 217 ++++++-
> 8 files changed, 1167 insertions(+), 38 deletions(-)
>
> --
> 2.16.2.windows.1
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out
2019-09-06 22:12 ` [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out Zurcher, Christopher J
@ 2019-09-09 7:05 ` Wu, Hao A
0 siblings, 0 replies; 8+ messages in thread
From: Wu, Hao A @ 2019-09-09 7:05 UTC (permalink / raw)
To: devel@edk2.groups.io, Zurcher, Christopher J
Cc: Yao, Jiewen, Wang, Jian J, Gao, Liming
Hello,
One inline comment below:
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Zurcher, Christopher J
> Sent: Saturday, September 07, 2019 6:12 AM
> To: devel@edk2.groups.io
> Cc: Yao, Jiewen; Wang, Jian J; Gao, Liming
> Subject: [edk2-devel] [PATCH v6 1/4] MdePkg: Implement SCSI commands
> for Security Protocol In/Out
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
>
> This patch implements the Security Protocol In and Security Protocol Out
> commands in UefiScsiLib to prepare support for the Storage Security
> Command Protocol.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
> ---
> MdePkg/Include/IndustryStandard/Scsi.h | 48 +++--
> MdePkg/Include/Library/UefiScsiLib.h | 128 +++++++++++-
> MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 217 +++++++++++++++++++-
> 3 files changed, 374 insertions(+), 19 deletions(-)
>
> diff --git a/MdePkg/Include/IndustryStandard/Scsi.h
> b/MdePkg/Include/IndustryStandard/Scsi.h
> index cbe5709fe5..d03886417f 100644
> --- a/MdePkg/Include/IndustryStandard/Scsi.h
> +++ b/MdePkg/Include/IndustryStandard/Scsi.h
> @@ -1,7 +1,7 @@
> /** @file
> Support for SCSI-2 standard
>
> - Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> + Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
> @@ -163,6 +163,12 @@
> #define EFI_SCSI_OP_SEND_MESSAGE10 0x2a
> #define EFI_SCSI_OP_SEND_MESSAGE12 0xaa
>
> +//
> +// Additional commands for Secure Transactions
> +//
> +#define EFI_SCSI_OP_SECURITY_PROTOCOL_IN 0xa2
> +#define EFI_SCSI_OP_SECURITY_PROTOCOL_OUT 0xb5
> +
> //
> // SCSI Data Transfer Direction
> //
> @@ -172,22 +178,30 @@
> //
> // Peripheral Device Type Definitions
> //
> -#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g.
> magnetic disk)
> -#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g.
> magnetic tape)
> -#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
> -#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
> -#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some
> optical disks)
> -#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD-ROM device
> -#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device
> -#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g.
> some optical disks)
> -#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer
> device (e.g. jukeboxes)
> -#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications
> device
> -#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic
> arts pre-press devices)
> -#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic
> arts pre-press devices)
> -//
> -// 0Ch - 1Eh are reserved
> -//
> -#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device
> type
> +#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g.
> magnetic disk)
> +#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g.
> magnetic tape)
> +#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
> +#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
> +#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g.
> some optical disks)
> +#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD/DVD device
> +#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device (obsolete)
> +#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g.
> some optical disks)
> +#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer
> device (e.g. jukeboxes)
> +#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications
> device (obsolete)
> +#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8
> (Graphic arts pre-press devices)
> +#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8
> (Graphic arts pre-press devices)
> +#define EFI_SCSI_TYPE_RAID 0x0C ///< Storage array controller
> device (e.g., RAID)
> +#define EFI_SCSI_TYPE_SES 0x0D ///< Enclosure services device
> +#define EFI_SCSI_TYPE_RBC 0x0E ///< Simplified direct-access device
> (e.g., magnetic disk)
> +#define EFI_SCSI_TYPE_OCRW 0x0F ///< Optical card reader/writer
> device
> +#define EFI_SCSI_TYPE_BRIDGE 0x10 ///< Bridge Controller Commands
> +#define EFI_SCSI_TYPE_OSD 0x11 ///< Object-based Storage Device
> +#define EFI_SCSI_TYPE_AUTOMATION 0x12 ///< Automation/Drive
> Interface
> +#define EFI_SCSI_TYPE_SECURITYMANAGER 0x13 ///< Security manager
> device
> +#define EFI_SCSI_TYPE_RESERVED_LOW 0x14 ///< Reserved (low)
> +#define EFI_SCSI_TYPE_RESERVED_HIGH 0x1D ///< Reserved (high)
> +#define EFI_SCSI_TYPE_WLUN 0x1E ///< Well known logical unit
> +#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device
> type
>
> //
> // Page Codes for INQUIRY command
> diff --git a/MdePkg/Include/Library/UefiScsiLib.h
> b/MdePkg/Include/Library/UefiScsiLib.h
> index 10dd81902b..5c94b0aa16 100644
> --- a/MdePkg/Include/Library/UefiScsiLib.h
> +++ b/MdePkg/Include/Library/UefiScsiLib.h
> @@ -5,7 +5,7 @@
> for hard drive, CD and DVD devices that are the most common SCSI boot
> targets used by UEFI platforms.
> This library class depends on SCSI I/O Protocol defined in UEFI Specification
> and SCSI-2 industry standard.
>
> -Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
> @@ -813,6 +813,132 @@ ScsiWrite16Command (
> );
>
>
> +/**
> + Execute Security Protocol In SCSI command on a specific SCSI target.
> +
> + Executes the SCSI Security Protocol In command on the SCSI target
> specified by ScsiIo.
> + If Timeout is zero, then this function waits indefinitely for the command to
> complete.
> + If Timeout is greater than zero, then the command is executed and will
> timeout after
> + Timeout 100 ns units.
> + If ScsiIo is NULL, then ASSERT().
> + If SenseDataLength is NULL, then ASSERT().
> + If HostAdapterStatus is NULL, then ASSERT().
> + If TargetStatus is NULL, then ASSERT().
> + If TransferLength is NULL, then ASSERT().
> +
> + If SenseDataLength is non-zero and SenseData is not NULL, SenseData
> must meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must
> meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + @param[in] ScsiIo SCSI IO Protocol to use.
> + @param[in] Timeout The length of timeout period.
> + @param[in, out] SenseData A pointer to output sense data.
> + @param[in, out] SenseDataLength The length of output sense data.
> + @param[out] HostAdapterStatus The status of Host Adapter.
> + @param[out] TargetStatus The status of the target.
> + @param[in] SecurityProtocol The Security Protocol to use.
> + @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
> + @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed
> in 512-byte increments.
> + @param[in] DataLength The size in bytes of the data buffer.
> + @param[in, out] DataBuffer A pointer to a data buffer.
> + @param[out] TransferLength A pointer to a buffer to store the size
> in
> + bytes of the data written to the data buffer.
> +
> + @retval EFI_SUCCESS Command is executed successfully.
> + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was
> executed, but the entire DataBuffer could
> + not be transferred. The actual number of bytes
> transferred is returned in TransferLength.
> + @retval EFI_NOT_READY The SCSI Request Packet could not be
> sent because there are too many
> + SCSI Command Packets already queued.
> + @retval EFI_DEVICE_ERROR A device error occurred while
> attempting to send SCSI Request Packet.
> + @retval EFI_UNSUPPORTED The command described by the SCSI
> Request Packet is not supported by
> + the SCSI initiator(i.e., SCSI Host Controller)
> + @retval EFI_TIMEOUT A timeout occurred while waiting for the
> SCSI Request Packet to execute.
> + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request
> Packet are invalid.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ScsiSecurityProtocolInCommand (
> + IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
> + IN UINT64 Timeout,
> + IN OUT VOID *SenseData, OPTIONAL
> + IN OUT UINT8 *SenseDataLength,
> + OUT UINT8 *HostAdapterStatus,
> + OUT UINT8 *TargetStatus,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SecurityProtocolSpecific,
> + IN BOOLEAN Inc512,
> + IN UINTN DataLength,
> + IN OUT VOID *DataBuffer, OPTIONAL
> + OUT UINTN *TransferLength
> + );
> +
> +
> +/**
> + Execute Security Protocol Out SCSI command on a specific SCSI target.
> +
> + Executes the SCSI Security Protocol Out command on the SCSI target
> specified by ScsiIo.
> + If Timeout is zero, then this function waits indefinitely for the command to
> complete.
> + If Timeout is greater than zero, then the command is executed and will
> timeout after
> + Timeout 100 ns units.
> + If ScsiIo is NULL, then ASSERT().
> + If SenseDataLength is NULL, then ASSERT().
> + If HostAdapterStatus is NULL, then ASSERT().
> + If TargetStatus is NULL, then ASSERT().
> +
> + If SenseDataLength is non-zero and SenseData is not NULL, SenseData
> must meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must
> meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + @param[in] ScsiIo SCSI IO Protocol to use.
> + @param[in] Timeout The length of timeout period.
> + @param[in, out] SenseData A pointer to output sense data.
> + @param[in, out] SenseDataLength The length of output sense data.
> + @param[out] HostAdapterStatus The status of Host Adapter.
> + @param[out] TargetStatus The status of the target.
> + @param[in] SecurityProtocol The Security Protocol to use.
> + @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
> + @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed
> in 512-byte increments.
> + @param[in] DataLength The size in bytes of the transfer data.
> + @param[in, out] DataBuffer A pointer to a data buffer.
> +
> + @retval EFI_SUCCESS Command is executed successfully.
> + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was
> executed, but the entire DataBuffer could
> + not be transferred. The actual number of bytes
> transferred is returned in DataLength.
> + @retval EFI_NOT_READY The SCSI Request Packet could not be
> sent because there are too many
> + SCSI Command Packets already queued.
> + @retval EFI_DEVICE_ERROR A device error occurred while
> attempting to send SCSI Request Packet.
> + @retval EFI_UNSUPPORTED The command described by the SCSI
> Request Packet is not supported by
> + the SCSI initiator(i.e., SCSI Host Controller)
> + @retval EFI_TIMEOUT A timeout occurred while waiting for the
> SCSI Request Packet to execute.
> + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request
> Packet are invalid.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ScsiSecurityProtocolOutCommand (
> + IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
> + IN UINT64 Timeout,
> + IN OUT VOID *SenseData, OPTIONAL
> + IN OUT UINT8 *SenseDataLength,
> + OUT UINT8 *HostAdapterStatus,
> + OUT UINT8 *TargetStatus,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SecurityProtocolSpecific,
> + IN BOOLEAN Inc512,
> + IN UINTN DataLength,
> + IN OUT VOID *DataBuffer OPTIONAL
> + );
> +
> +
> /**
> Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI
> target.
> diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
> b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
> index c7491d1436..229fe11ef2 100644
> --- a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
> +++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
> @@ -1,7 +1,7 @@
> /** @file
> UEFI SCSI Library implementation
>
> - Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> + Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
> @@ -23,6 +23,7 @@
> //
> #define EFI_SCSI_OP_LENGTH_SIX 0x6
> #define EFI_SCSI_OP_LENGTH_TEN 0xa
> +#define EFI_SCSI_OP_LENGTH_TWELVE 0xc
> #define EFI_SCSI_OP_LENGTH_SIXTEEN 0x10
>
> //
> @@ -1280,6 +1281,220 @@ ScsiWrite16Command (
> }
>
>
> +/**
> + Execute Security Protocol In SCSI command on a specific SCSI target.
> +
> + Executes the SCSI Security Protocol In command on the SCSI target
> specified by ScsiIo.
> + If Timeout is zero, then this function waits indefinitely for the command to
> complete.
> + If Timeout is greater than zero, then the command is executed and will
> timeout after
> + Timeout 100 ns units.
> + If ScsiIo is NULL, then ASSERT().
> + If SenseDataLength is NULL, then ASSERT().
> + If HostAdapterStatus is NULL, then ASSERT().
> + If TargetStatus is NULL, then ASSERT().
> + If TransferLength is NULL, then ASSERT().
> +
> + If SenseDataLength is non-zero and SenseData is not NULL, SenseData
> must meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must
> meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + @param[in] ScsiIo SCSI IO Protocol to use.
> + @param[in] Timeout The length of timeout period.
> + @param[in, out] SenseData A pointer to output sense data.
> + @param[in, out] SenseDataLength The length of output sense data.
> + @param[out] HostAdapterStatus The status of Host Adapter.
> + @param[out] TargetStatus The status of the target.
> + @param[in] SecurityProtocol The Security Protocol to use.
> + @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
> + @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed
> in 512-byte increments.
> + @param[in] DataLength The size in bytes of the data buffer.
> + @param[in, out] DataBuffer A pointer to a data buffer.
> + @param[out] TransferLength A pointer to a buffer to store the size
> in
> + bytes of the data written to the data buffer.
> +
> + @retval EFI_SUCCESS Command is executed successfully.
> + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was
> executed, but the entire DataBuffer could
> + not be transferred. The actual number of bytes
> transferred is returned in TransferLength.
> + @retval EFI_NOT_READY The SCSI Request Packet could not be
> sent because there are too many
> + SCSI Command Packets already queued.
> + @retval EFI_DEVICE_ERROR A device error occurred while
> attempting to send SCSI Request Packet.
> + @retval EFI_UNSUPPORTED The command described by the SCSI
> Request Packet is not supported by
> + the SCSI initiator(i.e., SCSI Host Controller)
> + @retval EFI_TIMEOUT A timeout occurred while waiting for the
> SCSI Request Packet to execute.
> + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request
> Packet are invalid.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ScsiSecurityProtocolInCommand (
> + IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
> + IN UINT64 Timeout,
> + IN OUT VOID *SenseData, OPTIONAL
> + IN OUT UINT8 *SenseDataLength,
> + OUT UINT8 *HostAdapterStatus,
> + OUT UINT8 *TargetStatus,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SecurityProtocolSpecific,
> + IN BOOLEAN Inc512,
> + IN UINTN DataLength,
> + IN OUT VOID *DataBuffer, OPTIONAL
> + OUT UINTN *TransferLength
> + )
> +{
> + EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
> + EFI_STATUS Status;
> + UINT8 Cdb[EFI_SCSI_OP_LENGTH_TWELVE];
> +
> + ASSERT (SenseDataLength != NULL);
> + ASSERT (HostAdapterStatus != NULL);
> + ASSERT (TargetStatus != NULL);
> + ASSERT (ScsiIo != NULL);
> + ASSERT (TransferLength != NULL);
> + ASSERT (DataLength <= MAX_UINT32);
> +
> + ZeroMem (&CommandPacket, sizeof
> (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
> + ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_TWELVE);
> +
> + CommandPacket.Timeout = Timeout;
> + CommandPacket.InDataBuffer = DataBuffer;
> + CommandPacket.SenseData = SenseData;
> + CommandPacket.InTransferLength = (UINT32) DataLength;
I think if 'Inc512' is TRUE, the above statement may not be proper.
My thought is that the 'Inc512' parameter only affects whether the Cdb[4] bit 7
will be set or not:
@param[in] Inc512 If TRUE, 512 increment (INC_512) bit will be set for the
SECURITY PROTOCOL IN command.
and for Cdb[6]:
if (Inc512) {
if (DataLength % 512 != 0) {
return EFI_INVALID_PARAMETER;
}
Cdb[4] = BIT7;
WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength / 512));
} else {
WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength));
}
Similar comment for the function ScsiSecurityProtocolOutCommand() as well.
Other than this, the patch looks good to me.
Best Regards,
Hao Wu
> + CommandPacket.Cdb = Cdb;
> + //
> + // Fill Cdb for Security Protocol In Command
> + //
> + Cdb[0] = EFI_SCSI_OP_SECURITY_PROTOCOL_IN;
> + Cdb[1] = SecurityProtocol;
> + WriteUnaligned16 ((UINT16 *)&Cdb[2], SwapBytes16
> (SecurityProtocolSpecific));
> + WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32)
> DataLength));
> +
> + if (Inc512) {
> + Cdb[4] = BIT7;
> + }
> +
> + CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TWELVE;
> + CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
> + CommandPacket.SenseDataLength = *SenseDataLength;
> +
> + Status = ScsiIo->ExecuteScsiCommand (ScsiIo,
> &CommandPacket, NULL);
> +
> + *HostAdapterStatus = CommandPacket.HostAdapterStatus;
> + *TargetStatus = CommandPacket.TargetStatus;
> + *SenseDataLength = CommandPacket.SenseDataLength;
> + *TransferLength = (UINTN) CommandPacket.InTransferLength;
> +
> + return Status;
> +}
> +
> +
> +/**
> + Execute Security Protocol Out SCSI command on a specific SCSI target.
> +
> + Executes the SCSI Security Protocol Out command on the SCSI target
> specified by ScsiIo.
> + If Timeout is zero, then this function waits indefinitely for the command to
> complete.
> + If Timeout is greater than zero, then the command is executed and will
> timeout after
> + Timeout 100 ns units.
> + If ScsiIo is NULL, then ASSERT().
> + If SenseDataLength is NULL, then ASSERT().
> + If HostAdapterStatus is NULL, then ASSERT().
> + If TargetStatus is NULL, then ASSERT().
> +
> + If SenseDataLength is non-zero and SenseData is not NULL, SenseData
> must meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must
> meet buffer
> + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise
> EFI_INVALID_PARAMETER
> + gets returned.
> +
> + @param[in] ScsiIo SCSI IO Protocol to use.
> + @param[in] Timeout The length of timeout period.
> + @param[in, out] SenseData A pointer to output sense data.
> + @param[in, out] SenseDataLength The length of output sense data.
> + @param[out] HostAdapterStatus The status of Host Adapter.
> + @param[out] TargetStatus The status of the target.
> + @param[in] SecurityProtocol The Security Protocol to use.
> + @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
> + @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed
> in 512-byte increments.
> + @param[in] DataLength The size in bytes of the transfer data.
> + @param[in, out] DataBuffer A pointer to a data buffer.
> +
> + @retval EFI_SUCCESS Command is executed successfully.
> + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was
> executed, but the entire DataBuffer could
> + not be transferred. The actual number of bytes
> transferred is returned in DataLength.
> + @retval EFI_NOT_READY The SCSI Request Packet could not be
> sent because there are too many
> + SCSI Command Packets already queued.
> + @retval EFI_DEVICE_ERROR A device error occurred while
> attempting to send SCSI Request Packet.
> + @retval EFI_UNSUPPORTED The command described by the SCSI
> Request Packet is not supported by
> + the SCSI initiator(i.e., SCSI Host Controller)
> + @retval EFI_TIMEOUT A timeout occurred while waiting for the
> SCSI Request Packet to execute.
> + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request
> Packet are invalid.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ScsiSecurityProtocolOutCommand (
> + IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
> + IN UINT64 Timeout,
> + IN OUT VOID *SenseData, OPTIONAL
> + IN OUT UINT8 *SenseDataLength,
> + OUT UINT8 *HostAdapterStatus,
> + OUT UINT8 *TargetStatus,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SecurityProtocolSpecific,
> + IN BOOLEAN Inc512,
> + IN UINTN DataLength,
> + IN OUT VOID *DataBuffer OPTIONAL
> + )
> +{
> + EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
> + EFI_STATUS Status;
> + UINT8 Cdb[EFI_SCSI_OP_LENGTH_TWELVE];
> +
> + ASSERT (SenseDataLength != NULL);
> + ASSERT (HostAdapterStatus != NULL);
> + ASSERT (TargetStatus != NULL);
> + ASSERT (ScsiIo != NULL);
> + ASSERT (DataLength <= MAX_UINT32);
> +
> + ZeroMem (&CommandPacket, sizeof
> (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
> + ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_TWELVE);
> +
> + CommandPacket.Timeout = Timeout;
> + CommandPacket.OutDataBuffer = DataBuffer;
> + CommandPacket.SenseData = SenseData;
> + CommandPacket.OutTransferLength = (UINT32) DataLength;
> + CommandPacket.Cdb = Cdb;
> + //
> + // Fill Cdb for Security Protocol Out Command
> + //
> + Cdb[0] = EFI_SCSI_OP_SECURITY_PROTOCOL_OUT;
> + Cdb[1] = SecurityProtocol;
> + WriteUnaligned16 ((UINT16 *)&Cdb[2], SwapBytes16
> (SecurityProtocolSpecific));
> + WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32)
> DataLength));
> +
> + if (Inc512) {
> + Cdb[4] = BIT7;
> + }
> +
> + CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TWELVE;
> + CommandPacket.DataDirection = EFI_SCSI_DATA_OUT;
> + CommandPacket.SenseDataLength = *SenseDataLength;
> +
> + Status = ScsiIo->ExecuteScsiCommand (ScsiIo,
> &CommandPacket, NULL);
> +
> + *HostAdapterStatus = CommandPacket.HostAdapterStatus;
> + *TargetStatus = CommandPacket.TargetStatus;
> + *SenseDataLength = CommandPacket.SenseDataLength;
> +
> + return Status;
> +}
> +
> +
> /**
> Internal helper notify function in which update the result of the
> non-blocking SCSI Read/Write commands and signal caller event.
> --
> 2.16.2.windows.1
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-09-09 7:05 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-06 22:12 [PATCH v6 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out Zurcher, Christopher J
2019-09-09 7:05 ` [edk2-devel] " Wu, Hao A
2019-09-06 22:12 ` [PATCH v6 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun) Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 3/4] MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v6 4/4] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol Zurcher, Christopher J
2019-09-06 22:12 ` [PATCH v5 0/4] Add SCSI Support for " Zurcher, Christopher J
2019-09-09 7:02 ` [edk2-devel] [PATCH v6 " Wu, Hao A
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox