* [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds
@ 2019-09-12 16:58 Ard Biesheuvel
2019-09-12 17:16 ` [edk2-devel] " Philippe Mathieu-Daudé
2019-09-13 12:43 ` Laszlo Ersek
0 siblings, 2 replies; 4+ messages in thread
From: Ard Biesheuvel @ 2019-09-12 16:58 UTC (permalink / raw)
To: devel; +Cc: leif.lindholm, lersek, philmd, Ard Biesheuvel
After upgrading the CI system we use for building the ArmVirtPkg
targets, we started seeing failures due to the NOOPT build running
out of space when using the CLANG38 toolchain definition combined
with clang 7.
We really don't want to increase the FD/FV sizes in general to
accommodate this, so parameterize the relevant quantities and
increase them by 50% for NOOPT builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
v3: - don't rely on fragile ordering of DEFINEs for the target dependent
default value, but instead, use a single FD_SIZE_IN_MB macro whose
default is DEFINEd either to 2 or 3 depend on the build target. That
permits switching back to 2 MB for NOOPT builds if desired while
changing the default to 3 MB
- fix a few image header definitions that I missed for ARM32 + Xen
v2: implement suggestions by Laszlo on 1) how to parameterize this further,
and b) to avoid adding another .inc file
update kernel header field, as pointed out by Philippe
ArmVirtPkg/ArmVirt.dsc.inc | 15 ++++++++++++
ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++---
ArmVirtPkg/ArmVirtQemuKernel.fdf | 24 +++++++++++++++++---
ArmVirtPkg/ArmVirtXen.fdf | 24 +++++++++++++++++---
4 files changed, 68 insertions(+), 9 deletions(-)
diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
index a4ae25d982a2..10037c938eb8 100644
--- a/ArmVirtPkg/ArmVirt.dsc.inc
+++ b/ArmVirtPkg/ArmVirt.dsc.inc
@@ -10,6 +10,21 @@
[Defines]
DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
+!if $(TARGET) != NOOPT
+ DEFINE FD_SIZE_IN_MB = 2
+!else
+ DEFINE FD_SIZE_IN_MB = 3
+!endif
+
+!if $(FD_SIZE_IN_MB) == 2
+ DEFINE FD_SIZE = 0x200000
+ DEFINE FD_NUM_BLOCKS = 0x200
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ DEFINE FD_SIZE = 0x300000
+ DEFINE FD_NUM_BLOCKS = 0x300
+!endif
+
[BuildOptions.common.EDKII.DXE_CORE,BuildOptions.common.EDKII.DXE_DRIVER,BuildOptions.common.EDKII.UEFI_DRIVER,BuildOptions.common.EDKII.UEFI_APPLICATION]
GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000
diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
index c2169cb7964b..2c8936a1ae15 100644
--- a/ArmVirtPkg/ArmVirtQemu.fdf
+++ b/ArmVirtPkg/ArmVirtQemu.fdf
@@ -20,14 +20,22 @@
#
################################################################################
+[Defines]
+!if $(FD_SIZE_IN_MB) == 2
+ DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
+!endif
+
[FD.QEMU_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
-NumBlocks = 0x200
+NumBlocks = $(FD_NUM_BLOCKS)
################################################################################
#
@@ -59,7 +67,7 @@ DATA = {
!endif
}
-0x00001000|0x001ff000
+0x00001000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
index f675b6d65ee1..72fc8dd698f8 100644
--- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
+++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
@@ -20,14 +20,22 @@
#
################################################################################
+[Defines]
+!if $(FD_SIZE_IN_MB) == 2
+ DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
+!endif
+
[FD.QEMU_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
-NumBlocks = 0x200
+NumBlocks = $(FD_NUM_BLOCKS)
################################################################################
#
@@ -56,7 +64,12 @@ DATA = {
0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
+!if $(FD_SIZE_IN_MB) == 2
0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
+!endif
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
@@ -76,12 +89,17 @@ DATA = {
0xf6, 0x1f, 0x00, 0xea, # b 0x8000
0x18, 0x28, 0x6f, 0x01, # magic
0x00, 0x00, 0x00, 0x00, # start
+!if $(FD_SIZE_IN_MB) == 2
0x00, 0x00, 0x20, 0x00, # image size: 2 MB
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
+!endif
0x01, 0x02, 0x03, 0x04 # endiannness flag
!endif
}
-0x00008000|0x001f8000
+0x00008000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
index 79f681cde028..38d4cc163524 100644
--- a/ArmVirtPkg/ArmVirtXen.fdf
+++ b/ArmVirtPkg/ArmVirtXen.fdf
@@ -20,14 +20,22 @@
#
################################################################################
+[Defines]
+!if $(FD_SIZE_IN_MB) == 2
+ DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
+!endif
+
[FD.XEN_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
-NumBlocks = 0x200
+NumBlocks = $(FD_NUM_BLOCKS)
################################################################################
#
@@ -56,7 +64,12 @@ DATA = {
0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
0xff, 0x07, 0x00, 0x14, # code1: b 0x2000
0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
+!if $(FD_SIZE_IN_MB) == 2
0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
+!endif
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
@@ -76,12 +89,17 @@ DATA = {
0xf6, 0x07, 0x00, 0xea, # b 0x2000
0x18, 0x28, 0x6f, 0x01, # magic
0x00, 0x00, 0x00, 0x00, # start
+!if $(FD_SIZE_IN_MB) == 2
0x00, 0x00, 0x20, 0x00, # image size: 2 MB
+!endif
+!if $(FD_SIZE_IN_MB) == 3
+ 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
+!endif
0x01, 0x02, 0x03, 0x04 # endiannness flag
!endif
}
-0x00002000|0x001fe000
+0x00002000|$(FVMAIN_COMPACT_SIZE)
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [edk2-devel] [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds
2019-09-12 16:58 [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
@ 2019-09-12 17:16 ` Philippe Mathieu-Daudé
2019-09-13 12:43 ` Laszlo Ersek
1 sibling, 0 replies; 4+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-09-12 17:16 UTC (permalink / raw)
To: devel, ard.biesheuvel; +Cc: leif.lindholm, lersek
On 9/12/19 6:58 PM, Ard Biesheuvel wrote:
> After upgrading the CI system we use for building the ArmVirtPkg
> targets, we started seeing failures due to the NOOPT build running
> out of space when using the CLANG38 toolchain definition combined
> with clang 7.
>
> We really don't want to increase the FD/FV sizes in general to
> accommodate this, so parameterize the relevant quantities and
> increase them by 50% for NOOPT builds.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> v3: - don't rely on fragile ordering of DEFINEs for the target dependent
> default value, but instead, use a single FD_SIZE_IN_MB macro whose
> default is DEFINEd either to 2 or 3 depend on the build target. That
> permits switching back to 2 MB for NOOPT builds if desired while
> changing the default to 3 MB
> - fix a few image header definitions that I missed for ARM32 + Xen
>
> v2: implement suggestions by Laszlo on 1) how to parameterize this further,
> and b) to avoid adding another .inc file
> update kernel header field, as pointed out by Philippe
>
>
> ArmVirtPkg/ArmVirt.dsc.inc | 15 ++++++++++++
> ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++---
> ArmVirtPkg/ArmVirtQemuKernel.fdf | 24 +++++++++++++++++---
> ArmVirtPkg/ArmVirtXen.fdf | 24 +++++++++++++++++---
> 4 files changed, 68 insertions(+), 9 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
> index a4ae25d982a2..10037c938eb8 100644
> --- a/ArmVirtPkg/ArmVirt.dsc.inc
> +++ b/ArmVirtPkg/ArmVirt.dsc.inc
> @@ -10,6 +10,21 @@
> [Defines]
> DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
>
> +!if $(TARGET) != NOOPT
> + DEFINE FD_SIZE_IN_MB = 2
> +!else
> + DEFINE FD_SIZE_IN_MB = 3
> +!endif
> +
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FD_SIZE = 0x200000
> + DEFINE FD_NUM_BLOCKS = 0x200
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FD_SIZE = 0x300000
> + DEFINE FD_NUM_BLOCKS = 0x300
> +!endif
> +
> [BuildOptions.common.EDKII.DXE_CORE,BuildOptions.common.EDKII.DXE_DRIVER,BuildOptions.common.EDKII.UEFI_DRIVER,BuildOptions.common.EDKII.UEFI_APPLICATION]
> GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000
>
> diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
> index c2169cb7964b..2c8936a1ae15 100644
> --- a/ArmVirtPkg/ArmVirtQemu.fdf
> +++ b/ArmVirtPkg/ArmVirtQemu.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -59,7 +67,7 @@ DATA = {
> !endif
> }
>
> -0x00001000|0x001ff000
> +0x00001000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> index f675b6d65ee1..72fc8dd698f8 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -56,7 +64,12 @@ DATA = {
> 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
> 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
> +!endif
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> @@ -76,12 +89,17 @@ DATA = {
> 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
> 0x18, 0x28, 0x6f, 0x01, # magic
> 0x00, 0x00, 0x00, 0x00, # start
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
> +!endif
> 0x01, 0x02, 0x03, 0x04 # endiannness flag
> !endif
> }
>
> -0x00008000|0x001f8000
> +0x00008000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
> index 79f681cde028..38d4cc163524 100644
> --- a/ArmVirtPkg/ArmVirtXen.fdf
> +++ b/ArmVirtPkg/ArmVirtXen.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
> +!endif
> +
> [FD.XEN_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -56,7 +64,12 @@ DATA = {
> 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> 0xff, 0x07, 0x00, 0x14, # code1: b 0x2000
> 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
> +!endif
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> @@ -76,12 +89,17 @@ DATA = {
> 0xf6, 0x07, 0x00, 0xea, # b 0x2000
> 0x18, 0x28, 0x6f, 0x01, # magic
> 0x00, 0x00, 0x00, 0x00, # start
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
> +!endif
> 0x01, 0x02, 0x03, 0x04 # endiannness flag
> !endif
> }
>
> -0x00002000|0x001fe000
> +0x00002000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds
2019-09-12 16:58 [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
2019-09-12 17:16 ` [edk2-devel] " Philippe Mathieu-Daudé
@ 2019-09-13 12:43 ` Laszlo Ersek
2019-09-13 13:51 ` Ard Biesheuvel
1 sibling, 1 reply; 4+ messages in thread
From: Laszlo Ersek @ 2019-09-13 12:43 UTC (permalink / raw)
To: Ard Biesheuvel, devel; +Cc: leif.lindholm, philmd
On 09/12/19 18:58, Ard Biesheuvel wrote:
> After upgrading the CI system we use for building the ArmVirtPkg
> targets, we started seeing failures due to the NOOPT build running
> out of space when using the CLANG38 toolchain definition combined
> with clang 7.
>
> We really don't want to increase the FD/FV sizes in general to
> accommodate this, so parameterize the relevant quantities and
> increase them by 50% for NOOPT builds.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> v3: - don't rely on fragile ordering of DEFINEs for the target dependent
> default value, but instead, use a single FD_SIZE_IN_MB macro whose
> default is DEFINEd either to 2 or 3 depend on the build target. That
> permits switching back to 2 MB for NOOPT builds if desired while
> changing the default to 3 MB
> - fix a few image header definitions that I missed for ARM32 + Xen
>
> v2: implement suggestions by Laszlo on 1) how to parameterize this further,
> and b) to avoid adding another .inc file
> update kernel header field, as pointed out by Philippe
>
>
> ArmVirtPkg/ArmVirt.dsc.inc | 15 ++++++++++++
> ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++---
> ArmVirtPkg/ArmVirtQemuKernel.fdf | 24 +++++++++++++++++---
> ArmVirtPkg/ArmVirtXen.fdf | 24 +++++++++++++++++---
> 4 files changed, 68 insertions(+), 9 deletions(-)
>
> diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
> index a4ae25d982a2..10037c938eb8 100644
> --- a/ArmVirtPkg/ArmVirt.dsc.inc
> +++ b/ArmVirtPkg/ArmVirt.dsc.inc
> @@ -10,6 +10,21 @@
> [Defines]
> DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
>
> +!if $(TARGET) != NOOPT
> + DEFINE FD_SIZE_IN_MB = 2
> +!else
> + DEFINE FD_SIZE_IN_MB = 3
> +!endif
> +
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FD_SIZE = 0x200000
> + DEFINE FD_NUM_BLOCKS = 0x200
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FD_SIZE = 0x300000
> + DEFINE FD_NUM_BLOCKS = 0x300
> +!endif
> +
> [BuildOptions.common.EDKII.DXE_CORE,BuildOptions.common.EDKII.DXE_DRIVER,BuildOptions.common.EDKII.UEFI_DRIVER,BuildOptions.common.EDKII.UEFI_APPLICATION]
> GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000
>
> diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
> index c2169cb7964b..2c8936a1ae15 100644
> --- a/ArmVirtPkg/ArmVirtQemu.fdf
> +++ b/ArmVirtPkg/ArmVirtQemu.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -59,7 +67,7 @@ DATA = {
> !endif
> }
>
> -0x00001000|0x001ff000
> +0x00001000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> index f675b6d65ee1..72fc8dd698f8 100644
> --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
> +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
> +!endif
> +
> [FD.QEMU_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -56,7 +64,12 @@ DATA = {
> 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
> 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
> +!endif
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> @@ -76,12 +89,17 @@ DATA = {
> 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
> 0x18, 0x28, 0x6f, 0x01, # magic
> 0x00, 0x00, 0x00, 0x00, # start
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
> +!endif
> 0x01, 0x02, 0x03, 0x04 # endiannness flag
> !endif
> }
>
> -0x00008000|0x001f8000
> +0x00008000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
> index 79f681cde028..38d4cc163524 100644
> --- a/ArmVirtPkg/ArmVirtXen.fdf
> +++ b/ArmVirtPkg/ArmVirtXen.fdf
> @@ -20,14 +20,22 @@
> #
> ################################################################################
>
> +[Defines]
> +!if $(FD_SIZE_IN_MB) == 2
> + DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
> +!endif
> +
> [FD.XEN_EFI]
> BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
> ErasePolarity = 1
>
> # This one is tricky, it must be: BlockSize * NumBlocks = Size
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = $(FD_NUM_BLOCKS)
>
> ################################################################################
> #
> @@ -56,7 +64,12 @@ DATA = {
> 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> 0xff, 0x07, 0x00, 0x14, # code1: b 0x2000
> 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
> +!endif
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> @@ -76,12 +89,17 @@ DATA = {
> 0xf6, 0x07, 0x00, 0xea, # b 0x2000
> 0x18, 0x28, 0x6f, 0x01, # magic
> 0x00, 0x00, 0x00, 0x00, # start
> +!if $(FD_SIZE_IN_MB) == 2
> 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> +!endif
> +!if $(FD_SIZE_IN_MB) == 3
> + 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
> +!endif
> 0x01, 0x02, 0x03, 0x04 # endiannness flag
> !endif
> }
>
> -0x00002000|0x001fe000
> +0x00002000|$(FVMAIN_COMPACT_SIZE)
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds
2019-09-13 12:43 ` Laszlo Ersek
@ 2019-09-13 13:51 ` Ard Biesheuvel
0 siblings, 0 replies; 4+ messages in thread
From: Ard Biesheuvel @ 2019-09-13 13:51 UTC (permalink / raw)
To: Laszlo Ersek
Cc: edk2-devel-groups-io, Leif Lindholm, Philippe Mathieu-Daudé
On Fri, 13 Sep 2019 at 13:44, Laszlo Ersek <lersek@redhat.com> wrote:
>
> On 09/12/19 18:58, Ard Biesheuvel wrote:
> > After upgrading the CI system we use for building the ArmVirtPkg
> > targets, we started seeing failures due to the NOOPT build running
> > out of space when using the CLANG38 toolchain definition combined
> > with clang 7.
> >
> > We really don't want to increase the FD/FV sizes in general to
> > accommodate this, so parameterize the relevant quantities and
> > increase them by 50% for NOOPT builds.
> >
> > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > ---
> > v3: - don't rely on fragile ordering of DEFINEs for the target dependent
> > default value, but instead, use a single FD_SIZE_IN_MB macro whose
> > default is DEFINEd either to 2 or 3 depend on the build target. That
> > permits switching back to 2 MB for NOOPT builds if desired while
> > changing the default to 3 MB
> > - fix a few image header definitions that I missed for ARM32 + Xen
> >
> > v2: implement suggestions by Laszlo on 1) how to parameterize this further,
> > and b) to avoid adding another .inc file
> > update kernel header field, as pointed out by Philippe
> >
> >
> > ArmVirtPkg/ArmVirt.dsc.inc | 15 ++++++++++++
> > ArmVirtPkg/ArmVirtQemu.fdf | 14 +++++++++---
> > ArmVirtPkg/ArmVirtQemuKernel.fdf | 24 +++++++++++++++++---
> > ArmVirtPkg/ArmVirtXen.fdf | 24 +++++++++++++++++---
> > 4 files changed, 68 insertions(+), 9 deletions(-)
> >
> > diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
> > index a4ae25d982a2..10037c938eb8 100644
> > --- a/ArmVirtPkg/ArmVirt.dsc.inc
> > +++ b/ArmVirtPkg/ArmVirt.dsc.inc
> > @@ -10,6 +10,21 @@
> > [Defines]
> > DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
> >
> > +!if $(TARGET) != NOOPT
> > + DEFINE FD_SIZE_IN_MB = 2
> > +!else
> > + DEFINE FD_SIZE_IN_MB = 3
> > +!endif
> > +
> > +!if $(FD_SIZE_IN_MB) == 2
> > + DEFINE FD_SIZE = 0x200000
> > + DEFINE FD_NUM_BLOCKS = 0x200
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + DEFINE FD_SIZE = 0x300000
> > + DEFINE FD_NUM_BLOCKS = 0x300
> > +!endif
> > +
> > [BuildOptions.common.EDKII.DXE_CORE,BuildOptions.common.EDKII.DXE_DRIVER,BuildOptions.common.EDKII.UEFI_DRIVER,BuildOptions.common.EDKII.UEFI_APPLICATION]
> > GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000
> >
> > diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
> > index c2169cb7964b..2c8936a1ae15 100644
> > --- a/ArmVirtPkg/ArmVirtQemu.fdf
> > +++ b/ArmVirtPkg/ArmVirtQemu.fdf
> > @@ -20,14 +20,22 @@
> > #
> > ################################################################################
> >
> > +[Defines]
> > +!if $(FD_SIZE_IN_MB) == 2
> > + DEFINE FVMAIN_COMPACT_SIZE = 0x1ff000
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + DEFINE FVMAIN_COMPACT_SIZE = 0x2ff000
> > +!endif
> > +
> > [FD.QEMU_EFI]
> > BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> > -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> > +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> > ErasePolarity = 1
> >
> > # This one is tricky, it must be: BlockSize * NumBlocks = Size
> > BlockSize = 0x00001000
> > -NumBlocks = 0x200
> > +NumBlocks = $(FD_NUM_BLOCKS)
> >
> > ################################################################################
> > #
> > @@ -59,7 +67,7 @@ DATA = {
> > !endif
> > }
> >
> > -0x00001000|0x001ff000
> > +0x00001000|$(FVMAIN_COMPACT_SIZE)
> > gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > FV = FVMAIN_COMPACT
> >
> > diff --git a/ArmVirtPkg/ArmVirtQemuKernel.fdf b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> > index f675b6d65ee1..72fc8dd698f8 100644
> > --- a/ArmVirtPkg/ArmVirtQemuKernel.fdf
> > +++ b/ArmVirtPkg/ArmVirtQemuKernel.fdf
> > @@ -20,14 +20,22 @@
> > #
> > ################################################################################
> >
> > +[Defines]
> > +!if $(FD_SIZE_IN_MB) == 2
> > + DEFINE FVMAIN_COMPACT_SIZE = 0x1f8000
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + DEFINE FVMAIN_COMPACT_SIZE = 0x2f8000
> > +!endif
> > +
> > [FD.QEMU_EFI]
> > BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
> > -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> > +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
> > ErasePolarity = 1
> >
> > # This one is tricky, it must be: BlockSize * NumBlocks = Size
> > BlockSize = 0x00001000
> > -NumBlocks = 0x200
> > +NumBlocks = $(FD_NUM_BLOCKS)
> >
> > ################################################################################
> > #
> > @@ -56,7 +64,12 @@ DATA = {
> > 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> > 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
> > 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> > +!if $(FD_SIZE_IN_MB) == 2
> > 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
> > +!endif
> > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> > @@ -76,12 +89,17 @@ DATA = {
> > 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
> > 0x18, 0x28, 0x6f, 0x01, # magic
> > 0x00, 0x00, 0x00, 0x00, # start
> > +!if $(FD_SIZE_IN_MB) == 2
> > 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
> > +!endif
> > 0x01, 0x02, 0x03, 0x04 # endiannness flag
> > !endif
> > }
> >
> > -0x00008000|0x001f8000
> > +0x00008000|$(FVMAIN_COMPACT_SIZE)
> > gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > FV = FVMAIN_COMPACT
> >
> > diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
> > index 79f681cde028..38d4cc163524 100644
> > --- a/ArmVirtPkg/ArmVirtXen.fdf
> > +++ b/ArmVirtPkg/ArmVirtXen.fdf
> > @@ -20,14 +20,22 @@
> > #
> > ################################################################################
> >
> > +[Defines]
> > +!if $(FD_SIZE_IN_MB) == 2
> > + DEFINE FVMAIN_COMPACT_SIZE = 0x1fe000
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + DEFINE FVMAIN_COMPACT_SIZE = 0x2fe000
> > +!endif
> > +
> > [FD.XEN_EFI]
> > BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> > -Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> > +Size = $(FD_SIZE)|gArmTokenSpaceGuid.PcdFdSize
> > ErasePolarity = 1
> >
> > # This one is tricky, it must be: BlockSize * NumBlocks = Size
> > BlockSize = 0x00001000
> > -NumBlocks = 0x200
> > +NumBlocks = $(FD_NUM_BLOCKS)
> >
> > ################################################################################
> > #
> > @@ -56,7 +64,12 @@ DATA = {
> > 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> > 0xff, 0x07, 0x00, 0x14, # code1: b 0x2000
> > 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> > +!if $(FD_SIZE_IN_MB) == 2
> > 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 3 MB
> > +!endif
> > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> > 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> > @@ -76,12 +89,17 @@ DATA = {
> > 0xf6, 0x07, 0x00, 0xea, # b 0x2000
> > 0x18, 0x28, 0x6f, 0x01, # magic
> > 0x00, 0x00, 0x00, 0x00, # start
> > +!if $(FD_SIZE_IN_MB) == 2
> > 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> > +!endif
> > +!if $(FD_SIZE_IN_MB) == 3
> > + 0x00, 0x00, 0x30, 0x00, # image size: 3 MB
> > +!endif
> > 0x01, 0x02, 0x03, 0x04 # endiannness flag
> > !endif
> > }
> >
> > -0x00002000|0x001fe000
> > +0x00002000|$(FVMAIN_COMPACT_SIZE)
> > gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > FV = FVMAIN_COMPACT
> >
> >
>
> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Thanks all
Pushed as 86ad762fa7a5..7551529ce104
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-09-13 13:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-12 16:58 [PATCH v3] ArmVirtPkg: increase FD/FV size for NOOPT builds Ard Biesheuvel
2019-09-12 17:16 ` [edk2-devel] " Philippe Mathieu-Daudé
2019-09-13 12:43 ` Laszlo Ersek
2019-09-13 13:51 ` Ard Biesheuvel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox