* [PATCH v7 1/4] MdePkg: Implement SCSI commands for Security Protocol In/Out
2019-09-27 2:12 [PATCH v7 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
@ 2019-09-27 2:12 ` Zurcher, Christopher J
2019-09-27 2:12 ` [PATCH v7 2/4] MdeModulePkg/UfsPassThruDxe: Check for RPMB W-LUN (SecurityLun) Zurcher, Christopher J
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Zurcher, Christopher J @ 2019-09-27 2:12 UTC (permalink / raw)
To: devel; +Cc: Jiewen Yao, Jian J Wang, Liming Gao
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
This patch implements the Security Protocol In and Security Protocol Out
commands in UefiScsiLib to prepare support for the Storage Security
Command Protocol.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdePkg/Include/IndustryStandard/Scsi.h | 48 ++--
MdePkg/Include/Library/UefiScsiLib.h | 128 ++++++++++-
MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 229 +++++++++++++++++++-
3 files changed, 386 insertions(+), 19 deletions(-)
diff --git a/MdePkg/Include/IndustryStandard/Scsi.h b/MdePkg/Include/IndustryStandard/Scsi.h
index cbe5709fe5..d03886417f 100644
--- a/MdePkg/Include/IndustryStandard/Scsi.h
+++ b/MdePkg/Include/IndustryStandard/Scsi.h
@@ -1,7 +1,7 @@
/** @file
Support for SCSI-2 standard
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -163,6 +163,12 @@
#define EFI_SCSI_OP_SEND_MESSAGE10 0x2a
#define EFI_SCSI_OP_SEND_MESSAGE12 0xaa
+//
+// Additional commands for Secure Transactions
+//
+#define EFI_SCSI_OP_SECURITY_PROTOCOL_IN 0xa2
+#define EFI_SCSI_OP_SECURITY_PROTOCOL_OUT 0xb5
+
//
// SCSI Data Transfer Direction
//
@@ -172,22 +178,30 @@
//
// Peripheral Device Type Definitions
//
-#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g. magnetic disk)
-#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g. magnetic tape)
-#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
-#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
-#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some optical disks)
-#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD-ROM device
-#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device
-#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g. some optical disks)
-#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer device (e.g. jukeboxes)
-#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications device
-#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic arts pre-press devices)
-#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic arts pre-press devices)
-//
-// 0Ch - 1Eh are reserved
-//
-#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device type
+#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g. magnetic disk)
+#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g. magnetic tape)
+#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
+#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
+#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some optical disks)
+#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD/DVD device
+#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device (obsolete)
+#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g. some optical disks)
+#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer device (e.g. jukeboxes)
+#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications device (obsolete)
+#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic arts pre-press devices)
+#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic arts pre-press devices)
+#define EFI_SCSI_TYPE_RAID 0x0C ///< Storage array controller device (e.g., RAID)
+#define EFI_SCSI_TYPE_SES 0x0D ///< Enclosure services device
+#define EFI_SCSI_TYPE_RBC 0x0E ///< Simplified direct-access device (e.g., magnetic disk)
+#define EFI_SCSI_TYPE_OCRW 0x0F ///< Optical card reader/writer device
+#define EFI_SCSI_TYPE_BRIDGE 0x10 ///< Bridge Controller Commands
+#define EFI_SCSI_TYPE_OSD 0x11 ///< Object-based Storage Device
+#define EFI_SCSI_TYPE_AUTOMATION 0x12 ///< Automation/Drive Interface
+#define EFI_SCSI_TYPE_SECURITYMANAGER 0x13 ///< Security manager device
+#define EFI_SCSI_TYPE_RESERVED_LOW 0x14 ///< Reserved (low)
+#define EFI_SCSI_TYPE_RESERVED_HIGH 0x1D ///< Reserved (high)
+#define EFI_SCSI_TYPE_WLUN 0x1E ///< Well known logical unit
+#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device type
//
// Page Codes for INQUIRY command
diff --git a/MdePkg/Include/Library/UefiScsiLib.h b/MdePkg/Include/Library/UefiScsiLib.h
index 10dd81902b..5c94b0aa16 100644
--- a/MdePkg/Include/Library/UefiScsiLib.h
+++ b/MdePkg/Include/Library/UefiScsiLib.h
@@ -5,7 +5,7 @@
for hard drive, CD and DVD devices that are the most common SCSI boot targets used by UEFI platforms.
This library class depends on SCSI I/O Protocol defined in UEFI Specification and SCSI-2 industry standard.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -813,6 +813,132 @@ ScsiWrite16Command (
);
+/**
+ Execute Security Protocol In SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol In command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If TransferLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed in 512-byte increments.
+ @param[in] DataLength The size in bytes of the data buffer.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+ @param[out] TransferLength A pointer to a buffer to store the size in
+ bytes of the data written to the data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in TransferLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolInCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ OUT UINTN *TransferLength
+ );
+
+
+/**
+ Execute Security Protocol Out SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol Out command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If Inc512 is TRUE, DataLength is expressed in 512-byte increments.
+ @param[in] DataLength The size in bytes of the transfer data.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolOutCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer OPTIONAL
+ );
+
+
/**
Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI
target.
diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
index c7491d1436..13a2a1912c 100644
--- a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
+++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c
@@ -1,7 +1,7 @@
/** @file
UEFI SCSI Library implementation
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -23,6 +23,7 @@
//
#define EFI_SCSI_OP_LENGTH_SIX 0x6
#define EFI_SCSI_OP_LENGTH_TEN 0xa
+#define EFI_SCSI_OP_LENGTH_TWELVE 0xc
#define EFI_SCSI_OP_LENGTH_SIXTEEN 0x10
//
@@ -1280,6 +1281,232 @@ ScsiWrite16Command (
}
+/**
+ Execute Security Protocol In SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol In command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+ If TransferLength is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If TRUE, 512 increment (INC_512) bit will be set for the
+ SECURITY PROTOCOL IN command.
+ @param[in] DataLength The size in bytes of the data buffer.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+ @param[out] TransferLength A pointer to a buffer to store the size in
+ bytes of the data written to the data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in TransferLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolInCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer, OPTIONAL
+ OUT UINTN *TransferLength
+ )
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ EFI_STATUS Status;
+ UINT8 Cdb[EFI_SCSI_OP_LENGTH_TWELVE];
+
+ ASSERT (SenseDataLength != NULL);
+ ASSERT (HostAdapterStatus != NULL);
+ ASSERT (TargetStatus != NULL);
+ ASSERT (ScsiIo != NULL);
+ ASSERT (TransferLength != NULL);
+ ASSERT (DataLength <= MAX_UINT32);
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_TWELVE);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.InDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.InTransferLength = (UINT32) DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Security Protocol In Command
+ //
+ Cdb[0] = EFI_SCSI_OP_SECURITY_PROTOCOL_IN;
+ Cdb[1] = SecurityProtocol;
+ WriteUnaligned16 ((UINT16 *)&Cdb[2], SwapBytes16 (SecurityProtocolSpecific));
+
+ if (Inc512) {
+ if (DataLength % 512 != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Cdb[4] = BIT7;
+ WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength / 512));
+ } else {
+ WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength));
+ }
+
+ CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TWELVE;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_IN;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+ *TransferLength = (UINTN) CommandPacket.InTransferLength;
+
+ return Status;
+}
+
+
+/**
+ Execute Security Protocol Out SCSI command on a specific SCSI target.
+
+ Executes the SCSI Security Protocol Out command on the SCSI target specified by ScsiIo.
+ If Timeout is zero, then this function waits indefinitely for the command to complete.
+ If Timeout is greater than zero, then the command is executed and will timeout after
+ Timeout 100 ns units.
+ If ScsiIo is NULL, then ASSERT().
+ If SenseDataLength is NULL, then ASSERT().
+ If HostAdapterStatus is NULL, then ASSERT().
+ If TargetStatus is NULL, then ASSERT().
+
+ If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer
+ alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER
+ gets returned.
+
+ @param[in] ScsiIo SCSI IO Protocol to use.
+ @param[in] Timeout The length of timeout period.
+ @param[in, out] SenseData A pointer to output sense data.
+ @param[in, out] SenseDataLength The length of output sense data.
+ @param[out] HostAdapterStatus The status of Host Adapter.
+ @param[out] TargetStatus The status of the target.
+ @param[in] SecurityProtocol The Security Protocol to use.
+ @param[in] SecurityProtocolSpecific The Security Protocol Specific data.
+ @param[in] Inc512 If TRUE, 512 increment (INC_512) bit will be set for the
+ SECURITY PROTOCOL OUT command.
+ @param[in] DataLength The size in bytes of the transfer data.
+ @param[in, out] DataBuffer A pointer to a data buffer.
+
+ @retval EFI_SUCCESS Command is executed successfully.
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could
+ not be transferred. The actual number of bytes transferred is returned in DataLength.
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
+ SCSI Command Packets already queued.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet.
+ @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by
+ the SCSI initiator(i.e., SCSI Host Controller)
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
+ @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiSecurityProtocolOutCommand (
+ IN EFI_SCSI_IO_PROTOCOL *ScsiIo,
+ IN UINT64 Timeout,
+ IN OUT VOID *SenseData, OPTIONAL
+ IN OUT UINT8 *SenseDataLength,
+ OUT UINT8 *HostAdapterStatus,
+ OUT UINT8 *TargetStatus,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SecurityProtocolSpecific,
+ IN BOOLEAN Inc512,
+ IN UINTN DataLength,
+ IN OUT VOID *DataBuffer OPTIONAL
+ )
+{
+ EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket;
+ EFI_STATUS Status;
+ UINT8 Cdb[EFI_SCSI_OP_LENGTH_TWELVE];
+
+ ASSERT (SenseDataLength != NULL);
+ ASSERT (HostAdapterStatus != NULL);
+ ASSERT (TargetStatus != NULL);
+ ASSERT (ScsiIo != NULL);
+ ASSERT (DataLength <= MAX_UINT32);
+
+ ZeroMem (&CommandPacket, sizeof (EFI_SCSI_IO_SCSI_REQUEST_PACKET));
+ ZeroMem (Cdb, EFI_SCSI_OP_LENGTH_TWELVE);
+
+ CommandPacket.Timeout = Timeout;
+ CommandPacket.OutDataBuffer = DataBuffer;
+ CommandPacket.SenseData = SenseData;
+ CommandPacket.OutTransferLength = (UINT32) DataLength;
+ CommandPacket.Cdb = Cdb;
+ //
+ // Fill Cdb for Security Protocol Out Command
+ //
+ Cdb[0] = EFI_SCSI_OP_SECURITY_PROTOCOL_OUT;
+ Cdb[1] = SecurityProtocol;
+ WriteUnaligned16 ((UINT16 *)&Cdb[2], SwapBytes16 (SecurityProtocolSpecific));
+
+ if (Inc512) {
+ if (DataLength % 512 != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Cdb[4] = BIT7;
+ WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength / 512));
+ } else {
+ WriteUnaligned32 ((UINT32 *)&Cdb[6], SwapBytes32 ((UINT32) DataLength));
+ }
+
+ CommandPacket.CdbLength = EFI_SCSI_OP_LENGTH_TWELVE;
+ CommandPacket.DataDirection = EFI_SCSI_DATA_OUT;
+ CommandPacket.SenseDataLength = *SenseDataLength;
+
+ Status = ScsiIo->ExecuteScsiCommand (ScsiIo, &CommandPacket, NULL);
+
+ *HostAdapterStatus = CommandPacket.HostAdapterStatus;
+ *TargetStatus = CommandPacket.TargetStatus;
+ *SenseDataLength = CommandPacket.SenseDataLength;
+
+ return Status;
+}
+
+
/**
Internal helper notify function in which update the result of the
non-blocking SCSI Read/Write commands and signal caller event.
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v7 4/4] MdeModulePkg/ScsiDiskDxe: Support Storage Security Command Protocol
2019-09-27 2:12 [PATCH v7 0/4] Add SCSI Support for Storage Security Command Protocol Zurcher, Christopher J
` (2 preceding siblings ...)
2019-09-27 2:12 ` [PATCH v7 3/4] MdeModulePkg/ScsiBusDxe: Clean up Peripheral Type check Zurcher, Christopher J
@ 2019-09-27 2:12 ` Zurcher, Christopher J
3 siblings, 0 replies; 5+ messages in thread
From: Zurcher, Christopher J @ 2019-09-27 2:12 UTC (permalink / raw)
To: devel; +Cc: Michael D Kinney, Jiewen Yao, Jian J Wang, Liming Gao
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
This patch implements the EFI_STORAGE_SECURITY_COMMAND_PROTOCOL in the
ScsiDiskDxe driver.
Support is currently limited to the RPMB Well-known LUN for UFS devices.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
---
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf | 3 +-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 171 +++++-
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 616 +++++++++++++++++++-
3 files changed, 774 insertions(+), 16 deletions(-)
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
index 5500d828e9..40818e669b 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
@@ -3,7 +3,7 @@
# It detects the SCSI disk media and installs Block I/O and Block I/O2 Protocol on
# the device handle.
#
-# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
@@ -52,6 +52,7 @@
gEfiBlockIoProtocolGuid ## BY_START
gEfiBlockIo2ProtocolGuid ## BY_START
gEfiEraseBlockProtocolGuid ## BY_START
+ gEfiStorageSecurityCommandProtocolGuid ## BY_START
gEfiScsiIoProtocolGuid ## TO_START
gEfiScsiPassThruProtocolGuid ## TO_START
gEfiExtScsiPassThruProtocolGuid ## TO_START
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
index 42c0aaaa95..2d8679ec6f 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
@@ -1,7 +1,7 @@
/** @file
Header file for SCSI Disk Driver.
-Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2004 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -22,6 +22,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/ScsiPassThruExt.h>
#include <Protocol/ScsiPassThru.h>
#include <Protocol/DiskInfo.h>
+#include <Protocol/StorageSecurityCommand.h>
#include <Library/DebugLib.h>
@@ -38,6 +39,10 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#define IS_DEVICE_FIXED(a) (a)->FixedDevice ? 1 : 0
+#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0)
+
+#define UFS_WLUN_RPMB 0xC4
+
typedef struct {
UINT32 MaxLbaCnt;
UINT32 MaxBlkDespCnt;
@@ -51,6 +56,8 @@ typedef struct {
EFI_HANDLE Handle;
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL StorageSecurity;
+
EFI_BLOCK_IO_PROTOCOL BlkIo;
EFI_BLOCK_IO2_PROTOCOL BlkIo2;
EFI_BLOCK_IO_MEDIA BlkIoMedia;
@@ -95,6 +102,7 @@ typedef struct {
#define SCSI_DISK_DEV_FROM_BLKIO(a) CR (a, SCSI_DISK_DEV, BlkIo, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_BLKIO2(a) CR (a, SCSI_DISK_DEV, BlkIo2, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_ERASEBLK(a) CR (a, SCSI_DISK_DEV, EraseBlock, SCSI_DISK_DEV_SIGNATURE)
+#define SCSI_DISK_DEV_FROM_STORSEC(a) CR (a, SCSI_DISK_DEV, StorageSecurity, SCSI_DISK_DEV_SIGNATURE)
#define SCSI_DISK_DEV_FROM_DISKINFO(a) CR (a, SCSI_DISK_DEV, DiskInfo, SCSI_DISK_DEV_SIGNATURE)
@@ -638,6 +646,151 @@ ScsiDiskEraseBlocks (
);
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ );
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskSendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer
+ );
+
+
/**
Provides inquiry information for the controller type.
@@ -1428,4 +1581,20 @@ DetermineInstallEraseBlock (
IN EFI_HANDLE ChildHandle
);
+/**
+ Determine if EFI Storage Security Command Protocol should be produced.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Handle of device.
+
+ @retval TRUE Should produce EFI Storage Security Command Protocol.
+ @retval FALSE Should not produce EFI Storage Security Command Protocol.
+
+**/
+BOOLEAN
+DetermineInstallStorageSecurity (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ );
+
#endif
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
index fbdf927a11..6bfcf03a4b 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
@@ -1,7 +1,7 @@
/** @file
SCSI disk driver that layers on every SCSI IO protocol in the system.
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
@@ -151,7 +151,9 @@ ScsiDiskDriverBindingSupported (
Status = ScsiIo->GetDeviceType (ScsiIo, &DeviceType);
if (!EFI_ERROR (Status)) {
- if ((DeviceType == EFI_SCSI_TYPE_DISK) || (DeviceType == EFI_SCSI_TYPE_CDROM)) {
+ if ((DeviceType == EFI_SCSI_TYPE_DISK) ||
+ (DeviceType == EFI_SCSI_TYPE_CDROM) ||
+ (DeviceType == EFI_SCSI_TYPE_WLUN)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_UNSUPPORTED;
@@ -238,6 +240,8 @@ ScsiDiskDriverBindingStart (
ScsiDiskDevice->BlkIo2.ReadBlocksEx = ScsiDiskReadBlocksEx;
ScsiDiskDevice->BlkIo2.WriteBlocksEx = ScsiDiskWriteBlocksEx;
ScsiDiskDevice->BlkIo2.FlushBlocksEx = ScsiDiskFlushBlocksEx;
+ ScsiDiskDevice->StorageSecurity.ReceiveData = ScsiDiskReceiveData;
+ ScsiDiskDevice->StorageSecurity.SendData = ScsiDiskSendData;
ScsiDiskDevice->EraseBlock.Revision = EFI_ERASE_BLOCK_PROTOCOL_REVISION;
ScsiDiskDevice->EraseBlock.EraseLengthGranularity = 1;
ScsiDiskDevice->EraseBlock.EraseBlocks = ScsiDiskEraseBlocks;
@@ -258,6 +262,10 @@ ScsiDiskDriverBindingStart (
ScsiDiskDevice->BlkIo.Media->ReadOnly = TRUE;
MustReadCapacity = FALSE;
break;
+
+ case EFI_SCSI_TYPE_WLUN:
+ MustReadCapacity = FALSE;
+ break;
}
//
// The Sense Data Array's initial size is 6
@@ -309,8 +317,8 @@ ScsiDiskDriverBindingStart (
// Determine if Block IO & Block IO2 should be produced on this controller
// handle
//
- if (DetermineInstallBlockIo(Controller)) {
- InitializeInstallDiskInfo(ScsiDiskDevice, Controller);
+ if (DetermineInstallBlockIo (Controller)) {
+ InitializeInstallDiskInfo (ScsiDiskDevice, Controller);
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiBlockIoProtocolGuid,
@@ -321,16 +329,27 @@ ScsiDiskDriverBindingStart (
&ScsiDiskDevice->DiskInfo,
NULL
);
- if (!EFI_ERROR(Status)) {
- if (DetermineInstallEraseBlock(ScsiDiskDevice, Controller)) {
+ if (!EFI_ERROR (Status)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, Controller)) {
Status = gBS->InstallProtocolInterface (
&Controller,
&gEfiEraseBlockProtocolGuid,
EFI_NATIVE_INTERFACE,
&ScsiDiskDevice->EraseBlock
);
- if (EFI_ERROR(Status)) {
- DEBUG ((EFI_D_ERROR, "ScsiDisk: Failed to install the Erase Block Protocol! Status = %r\n", Status));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "ScsiDisk: Failed to install the Erase Block Protocol! Status = %r\n", Status));
+ }
+ }
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, Controller)) {
+ Status = gBS->InstallProtocolInterface (
+ &Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "ScsiDisk: Failed to install the Storage Security Command Protocol! Status = %r\n", Status));
}
}
ScsiDiskDevice->ControllerNameTable = NULL;
@@ -585,7 +604,7 @@ ScsiDiskReadBlocks (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -593,6 +612,14 @@ ScsiDiskReadBlocks (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -606,6 +633,11 @@ ScsiDiskReadBlocks (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -721,7 +753,7 @@ ScsiDiskWriteBlocks (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -729,6 +761,14 @@ ScsiDiskWriteBlocks (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -742,6 +782,11 @@ ScsiDiskWriteBlocks (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -947,7 +992,7 @@ ScsiDiskReadBlocksEx (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -955,6 +1000,14 @@ ScsiDiskReadBlocksEx (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -968,6 +1021,11 @@ ScsiDiskReadBlocksEx (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -1110,7 +1168,7 @@ ScsiDiskWriteBlocksEx (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -1118,6 +1176,14 @@ ScsiDiskWriteBlocksEx (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -1131,6 +1197,11 @@ ScsiDiskWriteBlocksEx (
//
BlockSize = Media->BlockSize;
+ if (BlockSize == 0) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
NumberOfBlocks = BufferSize / BlockSize;
if (!(Media->MediaPresent)) {
@@ -1263,7 +1334,7 @@ ScsiDiskFlushBlocksEx (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -1271,6 +1342,14 @@ ScsiDiskFlushBlocksEx (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
if (Media->MediaPresent) {
Status = EFI_MEDIA_CHANGED;
} else {
@@ -1644,7 +1723,7 @@ ScsiDiskEraseBlocks (
&ScsiDiskDevice->BlkIo2,
&ScsiDiskDevice->BlkIo2
);
- if (DetermineInstallEraseBlock(ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
gBS->ReinstallProtocolInterface (
ScsiDiskDevice->Handle,
&gEfiEraseBlockProtocolGuid,
@@ -1652,6 +1731,14 @@ ScsiDiskEraseBlocks (
&ScsiDiskDevice->EraseBlock
);
}
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
Status = EFI_MEDIA_CHANGED;
goto Done;
}
@@ -1708,6 +1795,431 @@ Done:
return Status;
}
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ BOOLEAN MediaChange;
+ EFI_TPL OldTpl;
+ UINT8 SenseDataLength;
+ UINT8 HostAdapterStatus;
+ UINT8 TargetStatus;
+ VOID *AlignedBuffer;
+ BOOLEAN AlignedBufferAllocated;
+
+ AlignedBuffer = NULL;
+ MediaChange = FALSE;
+ AlignedBufferAllocated = FALSE;
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_STORSEC (This);
+ Media = ScsiDiskDevice->BlkIo.Media;
+
+ SenseDataLength = (UINT8) (ScsiDiskDevice->SenseDataNumber * sizeof (EFI_SCSI_SENSE_DATA));
+
+ if (!IS_DEVICE_FIXED (ScsiDiskDevice)) {
+ Status = ScsiDiskDetectMedia (ScsiDiskDevice, FALSE, &MediaChange);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ if (MediaChange) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIoProtocolGuid,
+ &ScsiDiskDevice->BlkIo,
+ &ScsiDiskDevice->BlkIo
+ );
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIo2ProtocolGuid,
+ &ScsiDiskDevice->BlkIo2,
+ &ScsiDiskDevice->BlkIo2
+ );
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiEraseBlockProtocolGuid,
+ &ScsiDiskDevice->EraseBlock,
+ &ScsiDiskDevice->EraseBlock
+ );
+ }
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
+ if (Media->MediaPresent) {
+ Status = EFI_MEDIA_CHANGED;
+ } else {
+ Status = EFI_NO_MEDIA;
+ }
+ goto Done;
+ }
+ }
+
+ //
+ // Validate Media
+ //
+ if (!(Media->MediaPresent)) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+
+ if ((MediaId != 0) && (MediaId != Media->MediaId)) {
+ Status = EFI_MEDIA_CHANGED;
+ goto Done;
+ }
+
+ if (PayloadBufferSize != 0) {
+ if ((PayloadBuffer == NULL) || (PayloadTransferSize == NULL)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ if ((ScsiDiskDevice->ScsiIo->IoAlign > 1) && !IS_ALIGNED (PayloadBuffer, ScsiDiskDevice->ScsiIo->IoAlign)) {
+ AlignedBuffer = AllocateAlignedBuffer (ScsiDiskDevice, PayloadBufferSize);
+ if (AlignedBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ AlignedBufferAllocated = TRUE;
+ } else {
+ AlignedBuffer = PayloadBuffer;
+ }
+ }
+
+ Status = ScsiSecurityProtocolInCommand (
+ ScsiDiskDevice->ScsiIo,
+ Timeout,
+ ScsiDiskDevice->SenseData,
+ &SenseDataLength,
+ &HostAdapterStatus,
+ &TargetStatus,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ FALSE,
+ PayloadBufferSize,
+ AlignedBuffer,
+ PayloadTransferSize
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ if (AlignedBufferAllocated) {
+ CopyMem (PayloadBuffer, AlignedBuffer, PayloadBufferSize);
+ }
+
+ if (PayloadBufferSize < *PayloadTransferSize) {
+ Status = EFI_WARN_BUFFER_TOO_SMALL;
+ goto Done;
+ }
+
+ Status = CheckHostAdapterStatus (HostAdapterStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckTargetStatus (TargetStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (AlignedBufferAllocated) {
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ FreeAlignedBuffer (AlignedBuffer, PayloadBufferSize);
+ }
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT if the
+ time required to execute the receive data command is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+ScsiDiskSendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId OPTIONAL,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer
+ )
+{
+ SCSI_DISK_DEV *ScsiDiskDevice;
+ EFI_BLOCK_IO_MEDIA *Media;
+ EFI_STATUS Status;
+ BOOLEAN MediaChange;
+ EFI_TPL OldTpl;
+ UINT8 SenseDataLength;
+ UINT8 HostAdapterStatus;
+ UINT8 TargetStatus;
+ VOID *AlignedBuffer;
+ BOOLEAN AlignedBufferAllocated;
+
+ AlignedBuffer = NULL;
+ MediaChange = FALSE;
+ AlignedBufferAllocated = FALSE;
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+ ScsiDiskDevice = SCSI_DISK_DEV_FROM_STORSEC (This);
+ Media = ScsiDiskDevice->BlkIo.Media;
+
+ SenseDataLength = (UINT8) (ScsiDiskDevice->SenseDataNumber * sizeof (EFI_SCSI_SENSE_DATA));
+
+ if (!IS_DEVICE_FIXED (ScsiDiskDevice)) {
+ Status = ScsiDiskDetectMedia (ScsiDiskDevice, FALSE, &MediaChange);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ if (MediaChange) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIoProtocolGuid,
+ &ScsiDiskDevice->BlkIo,
+ &ScsiDiskDevice->BlkIo
+ );
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiBlockIo2ProtocolGuid,
+ &ScsiDiskDevice->BlkIo2,
+ &ScsiDiskDevice->BlkIo2
+ );
+ if (DetermineInstallEraseBlock (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiEraseBlockProtocolGuid,
+ &ScsiDiskDevice->EraseBlock,
+ &ScsiDiskDevice->EraseBlock
+ );
+ }
+ if (DetermineInstallStorageSecurity (ScsiDiskDevice, ScsiDiskDevice->Handle)) {
+ gBS->ReinstallProtocolInterface (
+ ScsiDiskDevice->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ &ScsiDiskDevice->StorageSecurity,
+ &ScsiDiskDevice->StorageSecurity
+ );
+ }
+ if (Media->MediaPresent) {
+ Status = EFI_MEDIA_CHANGED;
+ } else {
+ Status = EFI_NO_MEDIA;
+ }
+ goto Done;
+ }
+ }
+
+ //
+ // Validate Media
+ //
+ if (!(Media->MediaPresent)) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+
+ if ((MediaId != 0) && (MediaId != Media->MediaId)) {
+ Status = EFI_MEDIA_CHANGED;
+ goto Done;
+ }
+
+ if (Media->ReadOnly) {
+ Status = EFI_WRITE_PROTECTED;
+ goto Done;
+ }
+
+ if (PayloadBufferSize != 0) {
+ if (PayloadBuffer == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto Done;
+ }
+
+ if ((ScsiDiskDevice->ScsiIo->IoAlign > 1) && !IS_ALIGNED (PayloadBuffer, ScsiDiskDevice->ScsiIo->IoAlign)) {
+ AlignedBuffer = AllocateAlignedBuffer (ScsiDiskDevice, PayloadBufferSize);
+ if (AlignedBuffer == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+ CopyMem (AlignedBuffer, PayloadBuffer, PayloadBufferSize);
+ AlignedBufferAllocated = TRUE;
+ } else {
+ AlignedBuffer = PayloadBuffer;
+ }
+ }
+
+ Status = ScsiSecurityProtocolOutCommand (
+ ScsiDiskDevice->ScsiIo,
+ Timeout,
+ ScsiDiskDevice->SenseData,
+ &SenseDataLength,
+ &HostAdapterStatus,
+ &TargetStatus,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ FALSE,
+ PayloadBufferSize,
+ AlignedBuffer
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckHostAdapterStatus (HostAdapterStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = CheckTargetStatus (TargetStatus);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (AlignedBufferAllocated) {
+ ZeroMem (AlignedBuffer, PayloadBufferSize);
+ FreeAlignedBuffer (AlignedBuffer, PayloadBufferSize);
+ }
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
/**
Detect Device and read out capacity ,if error occurs, parse the sense key.
@@ -1812,6 +2324,15 @@ ScsiDiskDetectMedia (
NeedReadCapacity = TRUE;
}
+ //
+ // READ_CAPACITY command is not supported by any of the UFS WLUNs.
+ //
+ if (ScsiDiskDevice->DeviceType == EFI_SCSI_TYPE_WLUN) {
+ NeedReadCapacity = FALSE;
+ MustReadCapacity = FALSE;
+ ScsiDiskDevice->BlkIo.Media->MediaPresent = TRUE;
+ }
+
//
// either NeedReadCapacity is TRUE, or MustReadCapacity is TRUE,
// retrieve capacity via Read Capacity command
@@ -5358,6 +5879,14 @@ DetermineInstallEraseBlock (
RetVal = TRUE;
CapacityData16 = NULL;
+ //
+ // UNMAP command is not supported by any of the UFS WLUNs.
+ //
+ if (ScsiDiskDevice->DeviceType == EFI_SCSI_TYPE_WLUN) {
+ RetVal = FALSE;
+ goto Done;
+ }
+
Status = gBS->HandleProtocol (
ChildHandle,
&gEfiDevicePathProtocolGuid,
@@ -5460,6 +5989,65 @@ Done:
return RetVal;
}
+/**
+ Determine if EFI Storage Security Command Protocol should be produced.
+
+ @param ScsiDiskDevice The pointer of SCSI_DISK_DEV.
+ @param ChildHandle Handle of device.
+
+ @retval TRUE Should produce EFI Storage Security Command Protocol.
+ @retval FALSE Should not produce EFI Storage Security Command Protocol.
+
+**/
+BOOLEAN
+DetermineInstallStorageSecurity (
+ IN SCSI_DISK_DEV *ScsiDiskDevice,
+ IN EFI_HANDLE ChildHandle
+ )
+{
+ EFI_STATUS Status;
+ UFS_DEVICE_PATH *UfsDevice;
+ BOOLEAN RetVal;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathNode;
+
+ UfsDevice = NULL;
+ RetVal = TRUE;
+
+ Status = gBS->HandleProtocol (
+ ChildHandle,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &DevicePathNode
+ );
+ //
+ // Device Path protocol must be installed on the device handle.
+ //
+ ASSERT_EFI_ERROR (Status);
+
+ while (!IsDevicePathEndType (DevicePathNode)) {
+ //
+ // For now, only support Storage Security Command Protocol on UFS devices.
+ //
+ if ((DevicePathNode->Type == MESSAGING_DEVICE_PATH) &&
+ (DevicePathNode->SubType == MSG_UFS_DP)) {
+ UfsDevice = (UFS_DEVICE_PATH *) DevicePathNode;
+ break;
+ }
+
+ DevicePathNode = NextDevicePathNode (DevicePathNode);
+ }
+ if (UfsDevice == NULL) {
+ RetVal = FALSE;
+ goto Done;
+ }
+
+ if (UfsDevice->Lun != UFS_WLUN_RPMB) {
+ RetVal = FALSE;
+ }
+
+Done:
+ return RetVal;
+}
+
/**
Provides inquiry information for the controller type.
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 5+ messages in thread