From: "Leif Lindholm" <leif.lindholm@linaro.org>
To: Pete Batard <pete@akeo.ie>
Cc: devel@edk2.groups.io, ard.biesheuvel@linaro.org
Subject: Re: [edk2-platforms][PATCH v2 1/5] Platform/RPi3/RpiFirmwareDxe: Add more query functions
Date: Thu, 10 Oct 2019 09:39:48 +0100 [thread overview]
Message-ID: <20191010083948.GS25504@bivouac.eciton.net> (raw)
In-Reply-To: <20191008123841.12952-2-pete@akeo.ie>
On Tue, Oct 08, 2019 at 01:38:37PM +0100, Pete Batard wrote:
> This patch introduces the capability to also query the Model Name/
> Manufacturer Name/CPU Name/Firmware Revision using the RpiFirmware
> protocol. This is aims at making the driver more suitable to cater
> for platforms other than the Raspberry Pi 3 as well as simplifying
> the population of entries in PlatformSmbiosDxe.
>
> Signed-off-by: Pete Batard <pete@akeo.ie>
> ---
> Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 155 +++++++++++++++++++-
> Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h | 58 ++++++--
> 2 files changed, 196 insertions(+), 17 deletions(-)
>
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> index 9b5ee1946279..378c99bcba05 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> +++ b/Platform/RaspberryPi/RPi3/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> @@ -461,7 +461,7 @@ typedef struct {
> RPI_FW_TAG_HEAD TagHead;
> RPI_FW_MODEL_REVISION_TAG TagBody;
> UINT32 EndTag;
> -} RPI_FW_GET_MODEL_REVISION_CMD;
> +} RPI_FW_GET_REVISION_CMD;
> #pragma pack()
>
> STATIC
> @@ -471,7 +471,7 @@ RpiFirmwareGetModelRevision (
> OUT UINT32 *Revision
> )
> {
> - RPI_FW_GET_MODEL_REVISION_CMD *Cmd;
> + RPI_FW_GET_REVISION_CMD *Cmd;
> EFI_STATUS Status;
> UINT32 Result;
>
> @@ -506,6 +506,153 @@ RpiFirmwareGetModelRevision (
> return EFI_SUCCESS;
> }
>
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +RpiFirmwareGetFirmwareRevision (
> + OUT UINT32 *Revision
> + )
> +{
> + RPI_FW_GET_REVISION_CMD *Cmd;
> + EFI_STATUS Status;
> + UINT32 Result;
> +
> + if (!AcquireSpinLockOrFail (&mMailboxLock)) {
> + DEBUG ((DEBUG_ERROR, "%a: failed to acquire spinlock\n", __FUNCTION__));
> + return EFI_DEVICE_ERROR;
> + }
> +
> + Cmd = mDmaBuffer;
> + ZeroMem (Cmd, sizeof (*Cmd));
> +
> + Cmd->BufferHead.BufferSize = sizeof (*Cmd);
> + Cmd->BufferHead.Response = 0;
> + Cmd->TagHead.TagId = RPI_MBOX_GET_REVISION;
> + Cmd->TagHead.TagSize = sizeof (Cmd->TagBody);
> + Cmd->TagHead.TagValueSize = 0;
> + Cmd->EndTag = 0;
> +
> + Status = MailboxTransaction (Cmd->BufferHead.BufferSize, RPI_MBOX_VC_CHANNEL, &Result);
> +
> + ReleaseSpinLock (&mMailboxLock);
> +
> + if (EFI_ERROR (Status) ||
> + Cmd->BufferHead.Response != RPI_MBOX_RESP_SUCCESS) {
> + DEBUG ((DEBUG_ERROR,
> + "%a: mailbox transaction error: Status == %r, Response == 0x%x\n",
> + __FUNCTION__, Status, Cmd->BufferHead.Response));
> + return EFI_DEVICE_ERROR;
> + }
> +
> + *Revision = Cmd->TagBody.Revision;
> + return EFI_SUCCESS;
> +}
> +
> +STATIC
> +CHAR8*
> +EFIAPI
> +RpiFirmwareGetModelName (
> + IN INTN ModelId
> + )
> +{
> + UINT32 Revision;
> +
> + // If a negative ModelId is passed, detect it.
> + if ((ModelId < 0) && (RpiFirmwareGetModelRevision (&Revision) == EFI_SUCCESS))
Style-wise, please always use {} with if-statements.
Beyond that, this pattern repeats identcally in three functions in
this file. Meanwhile, there is never any error handling of
RpiFirmwareGetModelRevision other than if not successful, we leave it
as negative. Are there other intended uses of that function, or could
we move this logic there?
/
Leif
> + ModelId = (Revision >> 4) & 0xFF;
> +
> + switch (ModelId) {
> + // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
> + case 0x00:
> + return "Raspberry Pi Model A";
> + case 0x01:
> + return "Raspberry Pi Model B";
> + case 0x02:
> + return "Raspberry Pi Model A+";
> + case 0x03:
> + return "Raspberry Pi Model B+";
> + case 0x04:
> + return "Raspberry Pi 2 Model B";
> + case 0x06:
> + return "Raspberry Pi Compute Module 1";
> + case 0x08:
> + return "Raspberry Pi 3 Model B";
> + case 0x09:
> + return "Raspberry Pi Zero";
> + case 0x0A:
> + return "Raspberry Pi Compute Module 3";
> + case 0x0C:
> + return "Raspberry Pi Zero W";
> + case 0x0D:
> + return "Raspberry Pi 3 Model B+";
> + case 0x0E:
> + return "Raspberry Pi 3 Model A+";
> + case 0x11:
> + return "Raspberry Pi 4 Model B";
> + default:
> + return "Unknown Raspberry Pi Model";
> + }
> +}
> +
> +STATIC
> +CHAR8*
> +EFIAPI
> +RpiFirmwareGetManufacturerName (
> + IN INTN ManufacturerId
> + )
> +{
> + UINT32 Revision;
> +
> + // If a negative ModelId is passed, detect it.
> + if ((ManufacturerId < 0) && (RpiFirmwareGetModelRevision (&Revision) == EFI_SUCCESS))
> + ManufacturerId = (Revision >> 16) & 0x0F;
> +
> + switch (ManufacturerId) {
> + // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
> + case 0x00:
> + return "Sony UK";
> + case 0x01:
> + return "Egoman";
> + case 0x02:
> + case 0x04:
> + return "Embest";
> + case 0x03:
> + return "Sony Japan";
> + case 0x05:
> + return "Stadium";
> + default:
> + return "Unknown Manufacturer";
> + }
> +}
> +
> +STATIC
> +CHAR8*
> +EFIAPI
> +RpiFirmwareGetCpuName (
> + IN INTN CpuId
> + )
> +{
> + UINT32 Revision;
> +
> + // If a negative CpuId is passed, detect it.
> + if ((CpuId < 0) && (RpiFirmwareGetModelRevision (&Revision) == EFI_SUCCESS))
> + CpuId = (Revision >> 12) & 0x0F;
> +
> + switch (CpuId) {
> + // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
> + case 0x00:
> + return "BCM2835 (ARM11)";
> + case 0x01:
> + return "BCM2836 (ARM Cortex-A7)";
> + case 0x02:
> + return "BCM2837 (ARM Cortex-A53)";
> + case 0x03:
> + return "BCM2711 (ARM Cortex-A72)";
> + default:
> + return "Unknown CPU Model";
> + }
> +}
> +
> #pragma pack()
> typedef struct {
> UINT32 Width;
> @@ -1009,6 +1156,10 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
> RpiFirmwareGetSerial,
> RpiFirmwareGetModel,
> RpiFirmwareGetModelRevision,
> + RpiFirmwareGetModelName,
> + RpiFirmwareGetFirmwareRevision,
> + RpiFirmwareGetManufacturerName,
> + RpiFirmwareGetCpuName,
> RpiFirmwareGetArmMemory
> };
>
> diff --git a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
> index ec70f28efe1a..e49d6e6132d9 100644
> --- a/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
> +++ b/Platform/RaspberryPi/RPi3/Include/Protocol/RpiFirmware.h
> @@ -96,6 +96,30 @@ EFI_STATUS
> UINT32 *Revision
> );
>
> +typedef
> +CHAR8*
> +(EFIAPI *GET_MODEL_NAME) (
> + INTN ModelId
> + );
> +
> +typedef
> +EFI_STATUS
> +(EFIAPI *GET_FIRMWARE_REVISION) (
> + UINT32 *Revision
> + );
> +
> +typedef
> +CHAR8*
> +(EFIAPI *GET_MANUFACTURER_NAME) (
> + INTN ManufacturerId
> + );
> +
> +typedef
> +CHAR8*
> +(EFIAPI *GET_CPU_NAME) (
> + INTN CpuId
> + );
> +
> typedef
> EFI_STATUS
> (EFIAPI *GET_ARM_MEM) (
> @@ -104,21 +128,25 @@ EFI_STATUS
> );
>
> typedef struct {
> - SET_POWER_STATE SetPowerState;
> - GET_MAC_ADDRESS GetMacAddress;
> - GET_COMMAND_LINE GetCommandLine;
> - GET_CLOCK_RATE GetClockRate;
> - GET_CLOCK_RATE GetMaxClockRate;
> - GET_CLOCK_RATE GetMinClockRate;
> - SET_CLOCK_RATE SetClockRate;
> - GET_FB GetFB;
> - FREE_FB FreeFB;
> - GET_FB_SIZE GetFBSize;
> - SET_LED SetLed;
> - GET_SERIAL GetSerial;
> - GET_MODEL GetModel;
> - GET_MODEL_REVISION GetModelRevision;
> - GET_ARM_MEM GetArmMem;
> + SET_POWER_STATE SetPowerState;
> + GET_MAC_ADDRESS GetMacAddress;
> + GET_COMMAND_LINE GetCommandLine;
> + GET_CLOCK_RATE GetClockRate;
> + GET_CLOCK_RATE GetMaxClockRate;
> + GET_CLOCK_RATE GetMinClockRate;
> + SET_CLOCK_RATE SetClockRate;
> + GET_FB GetFB;
> + FREE_FB FreeFB;
> + GET_FB_SIZE GetFBSize;
> + SET_LED SetLed;
> + GET_SERIAL GetSerial;
> + GET_MODEL GetModel;
> + GET_MODEL_REVISION GetModelRevision;
> + GET_MODEL_NAME GetModelName;
> + GET_FIRMWARE_REVISION GetFirmwareRevision;
> + GET_MANUFACTURER_NAME GetManufacturerName;
> + GET_CPU_NAME GetCpuName;
> + GET_ARM_MEM GetArmMem;
> } RASPBERRY_PI_FIRMWARE_PROTOCOL;
>
> extern EFI_GUID gRaspberryPiFirmwareProtocolGuid;
> --
> 2.21.0.windows.1
>
next prev parent reply other threads:[~2019-10-10 8:39 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-08 12:38 [edk2-platforms][PATCH v2 0/5] Platform/RPi3: Various SMBIOS improvements Pete Batard
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 1/5] Platform/RPi3/RpiFirmwareDxe: Add more query functions Pete Batard
2019-10-10 8:39 ` Leif Lindholm [this message]
2019-10-10 12:41 ` Pete Batard
2019-10-10 16:43 ` Leif Lindholm
2019-10-10 17:27 ` Pete Batard
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 2/5] Platform/RPi3/RpiFirmwareDxe: Improve serial number population Pete Batard
2019-10-10 8:43 ` Leif Lindholm
2019-10-10 12:41 ` Pete Batard
2019-10-10 16:49 ` Leif Lindholm
2019-10-10 17:28 ` Pete Batard
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 3/5] Platform/RPi3/PlatformSmbiosDxe: Improve population of SMBIOS entries Pete Batard
2019-10-10 8:59 ` Leif Lindholm
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 4/5] Platform/RPi3/PlatformSmbiosDxe: Populate BIOS major/minor from PCD Pete Batard
2019-10-10 9:01 ` Leif Lindholm
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 5/5] Platform/RPi3/PlatformSmbiosDxe: Derive RAM size from board revision Pete Batard
2019-10-10 9:03 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010083948.GS25504@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox