From: "Leif Lindholm" <leif.lindholm@linaro.org>
To: Pete Batard <pete@akeo.ie>
Cc: devel@edk2.groups.io, ard.biesheuvel@linaro.org
Subject: Re: [edk2-platforms][PATCH v2 5/5] Platform/RPi3/PlatformSmbiosDxe: Derive RAM size from board revision
Date: Thu, 10 Oct 2019 10:03:06 +0100 [thread overview]
Message-ID: <20191010090306.GW25504@bivouac.eciton.net> (raw)
In-Reply-To: <20191008123841.12952-6-pete@akeo.ie>
On Tue, Oct 08, 2019 at 01:38:41PM +0100, Pete Batard wrote:
> The board revision is the proper channel to use to detect the amount of
> RAM available as bits [20-22] report the effective RAM size for the board
> starting with 256 MB (000b) and doubling in size for each value.
>
> Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> index 66ffadd0cade..540e3fd61f25 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> +++ b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> @@ -863,16 +863,22 @@ MemArrMapInfoUpdateSmbiosType19 (
> )
> {
> EFI_STATUS Status;
> - UINT32 Base;
> - UINT32 Size;
> + UINT32 BoardRevision = 0;
>
> - Status = mFwProtocol->GetArmMem (&Base, &Size);
> + // Note: Type 19 addresses are expressed in KB, not bytes
> + mMemArrMapInfoType19.StartingAddress = 0;
> + // The minimum RAM size used on any Raspberry Pi model is 256 MB
> + mMemArrMapInfoType19.EndingAddress = 256 * 1024;
> + Status = mFwProtocol->GetModelRevision (&BoardRevision);
> if (Status != EFI_SUCCESS) {
> - DEBUG ((DEBUG_ERROR, "Couldn't get the ARM memory size: %r\n", Status));
> + DEBUG ((DEBUG_WARNING, "Couldn't get the board memory size - defaulting to 256 MB: %r\n", Status));
> } else {
> - mMemArrMapInfoType19.StartingAddress = Base / 1024;
> - mMemArrMapInfoType19.EndingAddress = (Base + Size - 1) / 1024;
> + // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
> + // Bits [20-22] indicate the amount of memory starting with 256MB (000b)
> + // and doubling in size for each value (001b = 512 MB, 010b = 1GB, etc.)
> + mMemArrMapInfoType19.EndingAddress <<= (BoardRevision >> 20) & 0x07;
> }
> + mMemArrMapInfoType19.EndingAddress -= 1;
>
> LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER*)&mMemArrMapInfoType19, mMemArrMapInfoType19Strings, NULL);
> }
> --
> 2.21.0.windows.1
>
prev parent reply other threads:[~2019-10-10 9:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-08 12:38 [edk2-platforms][PATCH v2 0/5] Platform/RPi3: Various SMBIOS improvements Pete Batard
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 1/5] Platform/RPi3/RpiFirmwareDxe: Add more query functions Pete Batard
2019-10-10 8:39 ` Leif Lindholm
2019-10-10 12:41 ` Pete Batard
2019-10-10 16:43 ` Leif Lindholm
2019-10-10 17:27 ` Pete Batard
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 2/5] Platform/RPi3/RpiFirmwareDxe: Improve serial number population Pete Batard
2019-10-10 8:43 ` Leif Lindholm
2019-10-10 12:41 ` Pete Batard
2019-10-10 16:49 ` Leif Lindholm
2019-10-10 17:28 ` Pete Batard
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 3/5] Platform/RPi3/PlatformSmbiosDxe: Improve population of SMBIOS entries Pete Batard
2019-10-10 8:59 ` Leif Lindholm
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 4/5] Platform/RPi3/PlatformSmbiosDxe: Populate BIOS major/minor from PCD Pete Batard
2019-10-10 9:01 ` Leif Lindholm
2019-10-08 12:38 ` [edk2-platforms][PATCH v2 5/5] Platform/RPi3/PlatformSmbiosDxe: Derive RAM size from board revision Pete Batard
2019-10-10 9:03 ` Leif Lindholm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010090306.GW25504@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox