public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Leif Lindholm" <leif.lindholm@linaro.org>
To: Pete Batard <pete@akeo.ie>
Cc: devel@edk2.groups.io, ard.biesheuvel@linaro.org, philmd@redhat.com
Subject: Re: [edk2-platforms][PATCH 1/8] Platform/RPi: Add model family detection
Date: Mon, 18 Nov 2019 17:51:56 +0000	[thread overview]
Message-ID: <20191118175156.GX7323@bivouac.eciton.net> (raw)
In-Reply-To: <20191114160740.10072-2-pete@akeo.ie>

On Thu, Nov 14, 2019 at 04:07:33PM +0000, Pete Batard wrote:
> From: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
> 
> Add GetModelFamily to RASPBERRY_PI_FIRMWARE_PROTOCOL.
> 
> This uses the board revision to return a numeric value representing
> the RPi family (1=RPi, 2=RPi2, 3=RPi3 and 4=RPi4).
> 
> Knowing the Pi family will help us set the SD card routing when we
> introduce support for the Pi 4 and should also be easier to maintain
> than if using individual model detection.
> 
> Also add a missing entry for the "Raspberry Pi Compute Module 3+" in
> RpiFirmwareGetModelName ().

Can you drop the above line and include the below as 1/? in v2?

/
    Leif

>From 59f01ff36ac7918e9ce166acbd3e963f638ab4b1 Mon Sep 17 00:00:00 2001
From: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Date: Mon, 18 Nov 2019 17:47:06 +0000
Subject: [PATCH edk2-platforms 1/1] Platform/RPi: Add missing model name

add a missing entry for the "Raspberry Pi Compute Module 3+" in
RpiFirmwareGetModelName ().

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
---
 Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
index 9b4aa068857c..dcb434fabefe 100644
--- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
+++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -1,5 +1,6 @@
 /** @file
  *
+ *  Copyright (c) 2019, ARM Limited. All rights reserved.
  *  Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
  *  Copyright (c) 2016, Linaro, Ltd. All rights reserved.
  *
@@ -595,6 +596,8 @@ RpiFirmwareGetModelName (
     return "Raspberry Pi 3 Model B+";
   case 0x0E:
     return "Raspberry Pi 3 Model A+";
+  case 0x10:
+    return "Raspberry Pi Compute Module 3+";
   case 0x11:
     return "Raspberry Pi 4 Model B";
   default:
-- 
2.20.1




  parent reply	other threads:[~2019-11-18 17:52 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-14 16:07 [edk2-platforms][PATCH 0/8] Platform/RPi: Early Raspberry Pi 4 groundwork Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 1/8] Platform/RPi: Add model family detection Pete Batard
2019-11-14 16:36   ` [edk2-devel] " Michael Brown
2019-11-14 16:55     ` Pete Batard
2019-11-18 17:51   ` Leif Lindholm [this message]
2019-11-18 17:58     ` Pete Batard
2019-11-18 18:05       ` Leif Lindholm
2019-11-18 18:32         ` Pete Batard
2019-11-19 15:07           ` Ard Biesheuvel
2019-11-19 16:30             ` [edk2-devel] " Pete Batard
2019-11-20 10:27               ` Leif Lindholm
2019-11-20 21:50                 ` Pete Batard
2019-11-21  8:55                   ` Laszlo Ersek
2019-11-21  9:04                     ` Laszlo Ersek
2019-11-21 20:02                       ` Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 2/8] Platform/RPi: Replace Bcm283x SoC base register address with a PCD Pete Batard
2019-11-18 16:48   ` Leif Lindholm
2019-11-18 17:19     ` [edk2-devel] " samer.el-haj-mahmoud
2019-11-18 17:26       ` Leif Lindholm
2019-11-14 16:07 ` [edk2-platforms][PATCH 3/8] Silicon/Broadcom: Add Bcm2711 header Pete Batard
2019-11-18 16:50   ` Leif Lindholm
2019-11-14 16:07 ` [edk2-platforms][PATCH 4/8] Platform/RPi: Read more variables from VideoCore during early init Pete Batard
2019-11-18 17:11   ` Leif Lindholm
2019-11-14 16:07 ` [edk2-platforms][PATCH 5/8] Platform/RPi: Clean up and improve early memory init Pete Batard
2019-11-18 17:20   ` Leif Lindholm
2019-11-18 17:34     ` Pete Batard
2019-11-18 17:38       ` Leif Lindholm
2019-11-18 17:40         ` Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 6/8] Platform/RPi: Replace Mailbox and Watchdog addresses with PCDs Pete Batard
2019-11-18 11:13   ` Philippe Mathieu-Daudé
2019-11-18 13:32     ` Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 7/8] Platform/RPi: Replace MMCHS1BASE define with a PCD Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 8/8] Platform/RPi: Replace DW2_USB_BASE_ADDRESS " Pete Batard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191118175156.GX7323@bivouac.eciton.net \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox