* [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time.
@ 2019-11-28 2:58 Dong, Eric
2019-11-28 4:43 ` [edk2-devel] " Ni, Ray
0 siblings, 1 reply; 5+ messages in thread
From: Dong, Eric @ 2019-11-28 2:58 UTC (permalink / raw)
To: devel; +Cc: Laszlo Ersek
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Current logic allocate Token every time when need to use it. The logic
caused SMI latency raised to very high. Update logic to allocate Token
buffer at driver's entry point. Later use the token from the allocated
token buffer. Only when all the buffer have been used, then need to
allocate new buffer.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
---
UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 56 +++++++++++++++++++---
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 16 +++++++
2 files changed, 66 insertions(+), 6 deletions(-)
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
index d8d2b6f444..702bbcd095 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
@@ -492,6 +492,24 @@ FreeTokens (
{
LIST_ENTRY *Link;
PROCEDURE_TOKEN *ProcToken;
+ TOKEN_BUFFER *TokenBuf;
+
+ //
+ // Only reset current used Token buffer, not free this buffer.
+ //
+ gSmmCpuPrivate->UsedTokenNum = 0;
+
+ Link = GetFirstNode (&gSmmCpuPrivate->OldTokenBufList);
+ while (!IsNull (&gSmmCpuPrivate->OldTokenBufList, Link)) {
+ TokenBuf = TOKEN_BUFFER_FROM_LINK (Link);
+
+ Link = GetNextNode (&gSmmCpuPrivate->OldTokenBufList, Link);
+
+ RemoveEntryList (&TokenBuf->Link);
+
+ FreePool (TokenBuf->Buffer);
+ FreePool (TokenBuf);
+ }
while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {
Link = GetFirstNode (&gSmmCpuPrivate->TokenList);
@@ -499,7 +517,6 @@ FreeTokens (
RemoveEntryList (&ProcToken->Link);
- FreePool ((VOID *)ProcToken->ProcedureToken);
FreePool (ProcToken);
}
}
@@ -1115,13 +1132,32 @@ CreateToken (
VOID
)
{
- PROCEDURE_TOKEN *ProcToken;
+ PROCEDURE_TOKEN *ProcToken;
SPIN_LOCK *CpuToken;
- UINTN SpinLockSize;
+ TOKEN_BUFFER *TokenBuf;
+
+ if (gSmmCpuPrivate->UsedTokenNum >= MAX_TOKEN_COUND_NUMBER - 1) {
+ DEBUG((DEBUG_INFO, "Token buffer not enough, allocate new buffer[TokenNum=0x%x]!\n", gSmmCpuPrivate->UsedTokenNum));
+
+ //
+ // Save Current Token Buffer to the list.
+ //
+ TokenBuf = AllocatePool (sizeof (TOKEN_BUFFER));
+ ASSERT (TokenBuf != NULL);
+ TokenBuf->Signature = TOKEN_BUFFER_SIGNATURE;
+ TokenBuf->Buffer = gSmmCpuPrivate->CurrentTokenBuf;
+
+ InsertTailList (&gSmmCpuPrivate->OldTokenBufList, &TokenBuf->Link);
+
+ gSmmCpuPrivate->CurrentTokenBuf = AllocateZeroPool (gSmmCpuPrivate->TokenSize * MAX_TOKEN_COUND_NUMBER);
+ ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
+ gSmmCpuPrivate->UsedTokenNum = 0;
+ }
+
+ CpuToken = (SPIN_LOCK *)(gSmmCpuPrivate->CurrentTokenBuf + gSmmCpuPrivate->TokenSize * gSmmCpuPrivate->UsedTokenNum);
+ gSmmCpuPrivate->UsedTokenNum++;
+ //DEBUG((DEBUG_INFO, "Token Address = 0x%x, Token Number = 0x%x\n", CpuToken, gSmmCpuPrivate->UsedTokenNum));
- SpinLockSize = GetSpinLockProperties ();
- CpuToken = AllocatePool (SpinLockSize);
- ASSERT (CpuToken != NULL);
InitializeSpinLock (CpuToken);
AcquireSpinLock (CpuToken);
@@ -1737,10 +1773,18 @@ InitializeDataForMmMp (
VOID
)
{
+ gSmmCpuPrivate->TokenSize = (UINT32)GetSpinLockProperties ();
+ DEBUG((DEBUG_INFO, "gSmmCpuPrivate->TokenSize = 0x%x\n", gSmmCpuPrivate->TokenSize));
+
+ gSmmCpuPrivate->CurrentTokenBuf = AllocateZeroPool (gSmmCpuPrivate->TokenSize * MAX_TOKEN_COUND_NUMBER);
+ ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
+ gSmmCpuPrivate->UsedTokenNum = 0;
+
gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof (PROCEDURE_WRAPPER) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);
ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);
InitializeListHead (&gSmmCpuPrivate->TokenList);
+ InitializeListHead (&gSmmCpuPrivate->OldTokenBufList);
}
/**
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
index 8c29f1a558..c197aad288 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
@@ -198,6 +198,7 @@ typedef UINT32 SMM_CPU_ARRIVAL_EXCEPTIONS;
#define ARRIVAL_EXCEPTION_DELAYED 0x2
#define ARRIVAL_EXCEPTION_SMI_DISABLED 0x4
+#define MAX_TOKEN_COUND_NUMBER 0x512
//
// Wrapper used to convert EFI_AP_PROCEDURE2 and EFI_AP_PROCEDURE.
//
@@ -217,6 +218,17 @@ typedef struct {
#define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN, Link, PROCEDURE_TOKEN_SIGNATURE)
+#define TOKEN_BUFFER_SIGNATURE SIGNATURE_32 ('T', 'K', 'B', 'S')
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link;
+
+ UINT8 *Buffer;
+} TOKEN_BUFFER;
+
+#define TOKEN_BUFFER_FROM_LINK(a) CR (a, TOKEN_BUFFER, Link, TOKEN_BUFFER_SIGNATURE)
+
//
// Private structure for the SMM CPU module that is stored in DXE Runtime memory
// Contains the SMM Configuration Protocols that is produced.
@@ -243,6 +255,10 @@ typedef struct {
PROCEDURE_WRAPPER *ApWrapperFunc;
LIST_ENTRY TokenList;
+ LIST_ENTRY OldTokenBufList;
+ UINT8 *CurrentTokenBuf;
+ UINTN UsedTokenNum; // Only record tokens used in CurrentTokenBuf.
+ UINT32 TokenSize;
} SMM_CPU_PRIVATE_DATA;
extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate;
--
2.23.0.windows.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [edk2-devel] [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time.
2019-11-28 2:58 [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time Dong, Eric
@ 2019-11-28 4:43 ` Ni, Ray
0 siblings, 0 replies; 5+ messages in thread
From: Ni, Ray @ 2019-11-28 4:43 UTC (permalink / raw)
To: devel@edk2.groups.io, Dong, Eric; +Cc: Laszlo Ersek
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Dong,
> Eric
> Sent: Thursday, November 28, 2019 10:58 AM
> To: devel@edk2.groups.io
> Cc: Laszlo Ersek <lersek@redhat.com>
> Subject: [edk2-devel] [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid
> allocate Token every time.
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
>
> Current logic allocate Token every time when need to use it. The logic
> caused SMI latency raised to very high. Update logic to allocate Token
> buffer at driver's entry point. Later use the token from the allocated
> token buffer. Only when all the buffer have been used, then need to
> allocate new buffer.
>
> Signed-off-by: Eric Dong <eric.dong@intel.com>
>
> Cc: Eric Dong <eric.dong@intel.com>
>
> Cc: Laszlo Ersek <lersek@redhat.com>
> ---
> UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 56
> +++++++++++++++++++---
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 16 +++++++
> 2 files changed, 66 insertions(+), 6 deletions(-)
>
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> index d8d2b6f444..702bbcd095 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> @@ -492,6 +492,24 @@ FreeTokens (
> {
>
> LIST_ENTRY *Link;
>
> PROCEDURE_TOKEN *ProcToken;
>
> + TOKEN_BUFFER *TokenBuf;
>
> +
>
> + //
>
> + // Only reset current used Token buffer, not free this buffer.
>
> + //
>
> + gSmmCpuPrivate->UsedTokenNum = 0;
>
> +
>
> + Link = GetFirstNode (&gSmmCpuPrivate->OldTokenBufList);
>
> + while (!IsNull (&gSmmCpuPrivate->OldTokenBufList, Link)) {
>
> + TokenBuf = TOKEN_BUFFER_FROM_LINK (Link);
>
> +
>
> + Link = GetNextNode (&gSmmCpuPrivate->OldTokenBufList, Link);
>
> +
>
> + RemoveEntryList (&TokenBuf->Link);
1. The above two lines can be combined to below single line:
Link = RemoveEntryList (&TokenBuf->Link);
>
> +
>
> + FreePool (TokenBuf->Buffer);
>
> + FreePool (TokenBuf);
>
> + }
>
>
>
> while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {
>
> Link = GetFirstNode (&gSmmCpuPrivate->TokenList);
>
> @@ -499,7 +517,6 @@ FreeTokens (
>
>
> RemoveEntryList (&ProcToken->Link);
>
>
>
> - FreePool ((VOID *)ProcToken->ProcedureToken);
>
> FreePool (ProcToken);
>
> }
>
> }
>
> @@ -1115,13 +1132,32 @@ CreateToken (
> VOID
>
> )
>
> {
>
> - PROCEDURE_TOKEN *ProcToken;
>
> + PROCEDURE_TOKEN *ProcToken;
>
> SPIN_LOCK *CpuToken;
>
> - UINTN SpinLockSize;
>
> + TOKEN_BUFFER *TokenBuf;
>
> +
>
> + if (gSmmCpuPrivate->UsedTokenNum >= MAX_TOKEN_COUND_NUMBER
> - 1) {
2. Can the macro be MAX_TOKEN_COUNT? The variable be " gSmmCpuPrivate->TokenCount"?
Usually when we define a storage, there are three variables: Elements[], Count, Capacity.
MAX_TOKEN_COUNT is the capacity. TokenCount is the count.
3. should be "TokenCount == MAX_TOKEN_COUNT".
4. Can you explain how the toke buffer is managed using comments?
>
> + DEBUG((DEBUG_INFO, "Token buffer not enough, allocate new
> buffer[TokenNum=0x%x]!\n", gSmmCpuPrivate->UsedTokenNum));
5. Suggest add prefix like "CpuSmm: ".
>
> +
>
> + //
>
> + // Save Current Token Buffer to the list.
>
> + //
>
> + TokenBuf = AllocatePool (sizeof (TOKEN_BUFFER));
>
> + ASSERT (TokenBuf != NULL);
>
> + TokenBuf->Signature = TOKEN_BUFFER_SIGNATURE;
>
> + TokenBuf->Buffer = gSmmCpuPrivate->CurrentTokenBuf;
>
> +
>
> + InsertTailList (&gSmmCpuPrivate->OldTokenBufList, &TokenBuf->Link);
>
> +
>
> + gSmmCpuPrivate->CurrentTokenBuf = AllocateZeroPool
> (gSmmCpuPrivate->TokenSize * MAX_TOKEN_COUND_NUMBER);
>
> + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
>
> + gSmmCpuPrivate->UsedTokenNum = 0;
>
> + }
>
> +
>
> + CpuToken = (SPIN_LOCK *)(gSmmCpuPrivate->CurrentTokenBuf +
> gSmmCpuPrivate->TokenSize * gSmmCpuPrivate->UsedTokenNum);
>
> + gSmmCpuPrivate->UsedTokenNum++;
>
> + //DEBUG((DEBUG_INFO, "Token Address = 0x%x, Token Number =
> 0x%x\n", CpuToken, gSmmCpuPrivate->UsedTokenNum));
>
>
>
> - SpinLockSize = GetSpinLockProperties ();
>
> - CpuToken = AllocatePool (SpinLockSize);
>
> - ASSERT (CpuToken != NULL);
>
> InitializeSpinLock (CpuToken);
>
> AcquireSpinLock (CpuToken);
>
>
>
> @@ -1737,10 +1773,18 @@ InitializeDataForMmMp (
> VOID
>
> )
>
> {
>
> + gSmmCpuPrivate->TokenSize = (UINT32)GetSpinLockProperties ();
6. How about not to cache the TokenSize?
>
> + DEBUG((DEBUG_INFO, "gSmmCpuPrivate->TokenSize = 0x%x\n",
> gSmmCpuPrivate->TokenSize));
7. Maybe no need.
>
> +
>
> + gSmmCpuPrivate->CurrentTokenBuf = AllocateZeroPool
> (gSmmCpuPrivate->TokenSize * MAX_TOKEN_COUND_NUMBER);
>
> + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
>
> + gSmmCpuPrivate->UsedTokenNum = 0;
>
> +
>
> gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof
> (PROCEDURE_WRAPPER) * gSmmCpuPrivate-
> >SmmCoreEntryContext.NumberOfCpus);
>
> ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);
>
>
>
> InitializeListHead (&gSmmCpuPrivate->TokenList);
>
> + InitializeListHead (&gSmmCpuPrivate->OldTokenBufList);
>
> }
>
>
>
> /**
>
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> index 8c29f1a558..c197aad288 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> @@ -198,6 +198,7 @@ typedef UINT32
> SMM_CPU_ARRIVAL_EXCEPTIONS;
> #define ARRIVAL_EXCEPTION_DELAYED 0x2
>
> #define ARRIVAL_EXCEPTION_SMI_DISABLED 0x4
>
>
>
> +#define MAX_TOKEN_COUND_NUMBER 0x512
>
> //
>
> // Wrapper used to convert EFI_AP_PROCEDURE2 and EFI_AP_PROCEDURE.
>
> //
>
> @@ -217,6 +218,17 @@ typedef struct {
>
>
> #define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN,
> Link, PROCEDURE_TOKEN_SIGNATURE)
>
>
>
> +#define TOKEN_BUFFER_SIGNATURE SIGNATURE_32 ('T', 'K', 'B', 'S')
>
> +
>
> +typedef struct {
>
> + UINTN Signature;
>
> + LIST_ENTRY Link;
>
> +
>
> + UINT8 *Buffer;
>
> +} TOKEN_BUFFER;
>
> +
>
> +#define TOKEN_BUFFER_FROM_LINK(a) CR (a, TOKEN_BUFFER, Link,
> TOKEN_BUFFER_SIGNATURE)
>
> +
>
> //
>
> // Private structure for the SMM CPU module that is stored in DXE Runtime
> memory
>
> // Contains the SMM Configuration Protocols that is produced.
>
> @@ -243,6 +255,10 @@ typedef struct {
> PROCEDURE_WRAPPER *ApWrapperFunc;
>
> LIST_ENTRY TokenList;
>
>
>
> + LIST_ENTRY OldTokenBufList;
>
> + UINT8 *CurrentTokenBuf;
>
> + UINTN UsedTokenNum; // Only record tokens used in
> CurrentTokenBuf.
>
> + UINT32 TokenSize;
>
> } SMM_CPU_PRIVATE_DATA;
>
>
>
> extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate;
>
> --
> 2.23.0.windows.1
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
>
> View/Reply Online (#51437): https://edk2.groups.io/g/devel/message/51437
> Mute This Topic: https://groups.io/mt/63641247/1712937
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni@intel.com]
> -=-=-=-=-=-=
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time
@ 2019-12-04 8:05 Dong, Eric
2019-12-04 9:20 ` Laszlo Ersek
0 siblings, 1 reply; 5+ messages in thread
From: Dong, Eric @ 2019-12-04 8:05 UTC (permalink / raw)
To: devel; +Cc: Ray Ni, Laszlo Ersek
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
---
V3 changes:
Introduce PCD to control the pre allocated toke buffer size.
v2 changes:
Minor update based on comments.
UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 67 ++++++++++++++++++--
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 15 +++++
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf | 1 +
UefiCpuPkg/UefiCpuPkg.dec | 4 ++
UefiCpuPkg/UefiCpuPkg.uni | 1 +
5 files changed, 84 insertions(+), 4 deletions(-)
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
index d8d2b6f444..33aad3f3e9 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
@@ -492,6 +492,24 @@ FreeTokens (
{
LIST_ENTRY *Link;
PROCEDURE_TOKEN *ProcToken;
+ TOKEN_BUFFER *TokenBuf;
+
+ //
+ // Not free the buffer, just clear the UsedTokenNum. In order to
+ // avoid triggering allocate action when we need to use the token,
+ // do not free the buffer.
+ //
+ gSmmCpuPrivate->UsedTokenNum = 0;
+
+ Link = GetFirstNode (&gSmmCpuPrivate->OldTokenBufList);
+ while (!IsNull (&gSmmCpuPrivate->OldTokenBufList, Link)) {
+ TokenBuf = TOKEN_BUFFER_FROM_LINK (Link);
+
+ Link = RemoveEntryList (&TokenBuf->Link);
+
+ FreePool (TokenBuf->Buffer);
+ FreePool (TokenBuf);
+ }
while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {
Link = GetFirstNode (&gSmmCpuPrivate->TokenList);
@@ -499,7 +517,6 @@ FreeTokens (
RemoveEntryList (&ProcToken->Link);
- FreePool ((VOID *)ProcToken->ProcedureToken);
FreePool (ProcToken);
}
}
@@ -1115,13 +1132,37 @@ CreateToken (
VOID
)
{
- PROCEDURE_TOKEN *ProcToken;
+ PROCEDURE_TOKEN *ProcToken;
SPIN_LOCK *CpuToken;
UINTN SpinLockSize;
+ TOKEN_BUFFER *TokenBuf;
+ UINT32 TokenCountPerChunk;
SpinLockSize = GetSpinLockProperties ();
- CpuToken = AllocatePool (SpinLockSize);
- ASSERT (CpuToken != NULL);
+ TokenCountPerChunk = PcdGet32 (PcdTokenCountPerChunk);
+
+ if (gSmmCpuPrivate->UsedTokenNum == TokenCountPerChunk) {
+ DEBUG ((DEBUG_VERBOSE, "CpuSmm: No free token buffer, allocate new buffer!\n"));
+
+ //
+ // Record current token buffer for later free action usage.
+ // Current used token buffer not in this list.
+ //
+ TokenBuf = AllocatePool (sizeof (TOKEN_BUFFER));
+ ASSERT (TokenBuf != NULL);
+ TokenBuf->Signature = TOKEN_BUFFER_SIGNATURE;
+ TokenBuf->Buffer = gSmmCpuPrivate->CurrentTokenBuf;
+
+ InsertTailList (&gSmmCpuPrivate->OldTokenBufList, &TokenBuf->Link);
+
+ gSmmCpuPrivate->CurrentTokenBuf = AllocatePool (SpinLockSize * TokenCountPerChunk);
+ ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
+ gSmmCpuPrivate->UsedTokenNum = 0;
+ }
+
+ CpuToken = (SPIN_LOCK *)(gSmmCpuPrivate->CurrentTokenBuf + SpinLockSize * gSmmCpuPrivate->UsedTokenNum);
+ gSmmCpuPrivate->UsedTokenNum++;
+
InitializeSpinLock (CpuToken);
AcquireSpinLock (CpuToken);
@@ -1737,10 +1778,28 @@ InitializeDataForMmMp (
VOID
)
{
+ UINTN SpinLockSize;
+ UINT32 TokenCountPerChunk;
+
+ SpinLockSize = GetSpinLockProperties ();
+ TokenCountPerChunk = PcdGet32 (PcdTokenCountPerChunk);
+ ASSERT_EFI_ERROR (TokenCountPerChunk != 0);
+ if (TokenCountPerChunk == 0) {
+ DEBUG ((EFI_D_ERROR, "PcdTokenCountPerChunk should not be Zero!\n"));
+ CpuDeadLoop ();
+ }
+ DEBUG ((DEBUG_INFO, "CpuSmm: SpinLock Size = 0x%x, PreAllocateTokenNum = 0x%x\n", SpinLockSize, TokenCountPerChunk));
+
+ gSmmCpuPrivate->CurrentTokenBuf = AllocatePool (SpinLockSize * TokenCountPerChunk);
+ ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
+
+ gSmmCpuPrivate->UsedTokenNum = 0;
+
gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof (PROCEDURE_WRAPPER) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);
ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);
InitializeListHead (&gSmmCpuPrivate->TokenList);
+ InitializeListHead (&gSmmCpuPrivate->OldTokenBufList);
}
/**
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
index 8c29f1a558..08ef8d2e15 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
@@ -217,6 +217,17 @@ typedef struct {
#define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN, Link, PROCEDURE_TOKEN_SIGNATURE)
+#define TOKEN_BUFFER_SIGNATURE SIGNATURE_32 ('T', 'K', 'B', 'S')
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link;
+
+ UINT8 *Buffer;
+} TOKEN_BUFFER;
+
+#define TOKEN_BUFFER_FROM_LINK(a) CR (a, TOKEN_BUFFER, Link, TOKEN_BUFFER_SIGNATURE)
+
//
// Private structure for the SMM CPU module that is stored in DXE Runtime memory
// Contains the SMM Configuration Protocols that is produced.
@@ -243,6 +254,10 @@ typedef struct {
PROCEDURE_WRAPPER *ApWrapperFunc;
LIST_ENTRY TokenList;
+ LIST_ENTRY OldTokenBufList;
+
+ UINT8 *CurrentTokenBuf;
+ UINTN UsedTokenNum; // Only record tokens used in CurrentTokenBuf.
} SMM_CPU_PRIVATE_DATA;
extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate;
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
index 851a8cb258..8b6c71b697 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
@@ -140,6 +140,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask ## CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask ## CONSUMES
gEfiMdePkgTokenSpaceGuid.PcdControlFlowEnforcementPropertyMask ## CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdTokenCountPerChunk ## CONSUMES
[Depex]
gEfiMpServiceProtocolGuid
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 83acd33612..8ec2153459 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -147,6 +147,10 @@
# @Prompt Specify size of good stack of exception which need switching stack.
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize|2048|UINT32|0x30002001
+ ## Size of pre allocated token count per chunk.
+ # @Prompt Specify the size of pre allocated token count per chunk.
+ gUefiCpuPkgTokenSpaceGuid.PcdTokenCountPerChunk|64|UINT32|0x30002002
+
[PcdsFixedAtBuild, PcdsPatchableInModule]
## This value is the CPU Local APIC base address, which aligns the address on a 4-KByte boundary.
# @Prompt Configure base address of CPU Local APIC
diff --git a/UefiCpuPkg/UefiCpuPkg.uni b/UefiCpuPkg/UefiCpuPkg.uni
index fbf7680726..3bb951cc72 100644
--- a/UefiCpuPkg/UefiCpuPkg.uni
+++ b/UefiCpuPkg/UefiCpuPkg.uni
@@ -252,3 +252,4 @@
"24000000 - 6th and 7th generation Intel Core processors and Intel Xeon W Processor Family(24MHz).<BR>\n"
"19200000 - Intel Atom processors based on Goldmont Microarchitecture with CPUID signature 06_5CH(19.2MHz).<BR>\n"
+#string STR_gUefiCpuPkgTokenSpaceGuid_PcdTokenCountPerChunk_PROMPT #language en-US "Specify the size of pre allocated token count per chunk.\n"
\ No newline at end of file
--
2.23.0.windows.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time
2019-12-04 8:05 Dong, Eric
@ 2019-12-04 9:20 ` Laszlo Ersek
2019-12-05 0:25 ` Dong, Eric
0 siblings, 1 reply; 5+ messages in thread
From: Laszlo Ersek @ 2019-12-04 9:20 UTC (permalink / raw)
To: Eric Dong, devel; +Cc: Ray Ni
Hi Eric,
I have three comments:
On 12/04/19 09:05, Eric Dong wrote:
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
>
> Token is new introduced by MM MP Protocol. Current logic allocate Token
> every time when need to use it. The logic caused SMI latency raised to
> very high. Update logic to allocate Token buffer at driver's entry point.
> Later use the token from the allocated token buffer. Only when all the
> buffer have been used, then need to allocate new buffer.
>
> Signed-off-by: Eric Dong <eric.dong@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Laszlo Ersek <lersek@redhat.com>
> ---
> V3 changes:
> Introduce PCD to control the pre allocated toke buffer size.
>
> v2 changes:
> Minor update based on comments.
>
> UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 67 ++++++++++++++++++--
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 15 +++++
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf | 1 +
> UefiCpuPkg/UefiCpuPkg.dec | 4 ++
> UefiCpuPkg/UefiCpuPkg.uni | 1 +
> 5 files changed, 84 insertions(+), 4 deletions(-)
>
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> index d8d2b6f444..33aad3f3e9 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> @@ -492,6 +492,24 @@ FreeTokens (
> {
> LIST_ENTRY *Link;
> PROCEDURE_TOKEN *ProcToken;
> + TOKEN_BUFFER *TokenBuf;
> +
> + //
> + // Not free the buffer, just clear the UsedTokenNum. In order to
> + // avoid triggering allocate action when we need to use the token,
> + // do not free the buffer.
> + //
> + gSmmCpuPrivate->UsedTokenNum = 0;
> +
> + Link = GetFirstNode (&gSmmCpuPrivate->OldTokenBufList);
> + while (!IsNull (&gSmmCpuPrivate->OldTokenBufList, Link)) {
> + TokenBuf = TOKEN_BUFFER_FROM_LINK (Link);
> +
> + Link = RemoveEntryList (&TokenBuf->Link);
> +
> + FreePool (TokenBuf->Buffer);
> + FreePool (TokenBuf);
> + }
>
> while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {
> Link = GetFirstNode (&gSmmCpuPrivate->TokenList);
> @@ -499,7 +517,6 @@ FreeTokens (
>
> RemoveEntryList (&ProcToken->Link);
>
> - FreePool ((VOID *)ProcToken->ProcedureToken);
> FreePool (ProcToken);
> }
> }
> @@ -1115,13 +1132,37 @@ CreateToken (
> VOID
> )
> {
> - PROCEDURE_TOKEN *ProcToken;
> + PROCEDURE_TOKEN *ProcToken;
> SPIN_LOCK *CpuToken;
> UINTN SpinLockSize;
> + TOKEN_BUFFER *TokenBuf;
> + UINT32 TokenCountPerChunk;
>
> SpinLockSize = GetSpinLockProperties ();
> - CpuToken = AllocatePool (SpinLockSize);
> - ASSERT (CpuToken != NULL);
> + TokenCountPerChunk = PcdGet32 (PcdTokenCountPerChunk);
(1) I understand that the DEC file introduces the PCD as
[PcdsFixedAtBuild] *only*. So, at this specific time, the code above is
safe.
But I'm worried that at a later time, we might relax that to a dynamic
PCD, and then the above code will behave really badly. Therefore, please
update the patch in one of two ways:
(1a) please use a static global variable in the entry point function to
cache the PCD, and then use that variable in place of the PCD everywhere,
(1b) alternatively, please update the INF file, and the PcdGet32() calls
too, to [FixedPcd] and FixedPcdGet32(). Then, if we happen to relax the
PCD declaration to dynamic, and a platform actually tries to use that,
they will get a build error. (And then they'll be forced to imlement
(1a) above.)
The idea is to make this as robust / safe as possible.
> +
> + if (gSmmCpuPrivate->UsedTokenNum == TokenCountPerChunk) {
> + DEBUG ((DEBUG_VERBOSE, "CpuSmm: No free token buffer, allocate new buffer!\n"));
> +
> + //
> + // Record current token buffer for later free action usage.
> + // Current used token buffer not in this list.
> + //
> + TokenBuf = AllocatePool (sizeof (TOKEN_BUFFER));
> + ASSERT (TokenBuf != NULL);
> + TokenBuf->Signature = TOKEN_BUFFER_SIGNATURE;
> + TokenBuf->Buffer = gSmmCpuPrivate->CurrentTokenBuf;
> +
> + InsertTailList (&gSmmCpuPrivate->OldTokenBufList, &TokenBuf->Link);
> +
> + gSmmCpuPrivate->CurrentTokenBuf = AllocatePool (SpinLockSize * TokenCountPerChunk);
> + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
> + gSmmCpuPrivate->UsedTokenNum = 0;
> + }
> +
> + CpuToken = (SPIN_LOCK *)(gSmmCpuPrivate->CurrentTokenBuf + SpinLockSize * gSmmCpuPrivate->UsedTokenNum);
> + gSmmCpuPrivate->UsedTokenNum++;
> +
> InitializeSpinLock (CpuToken);
> AcquireSpinLock (CpuToken);
>
> @@ -1737,10 +1778,28 @@ InitializeDataForMmMp (
> VOID
> )
> {
> + UINTN SpinLockSize;
> + UINT32 TokenCountPerChunk;
> +
> + SpinLockSize = GetSpinLockProperties ();
> + TokenCountPerChunk = PcdGet32 (PcdTokenCountPerChunk);
> + ASSERT_EFI_ERROR (TokenCountPerChunk != 0);
> + if (TokenCountPerChunk == 0) {
> + DEBUG ((EFI_D_ERROR, "PcdTokenCountPerChunk should not be Zero!\n"));
(2) This is a good check, but we should use DEBUG_ERROR, not EFI_D_ERROR.
> + CpuDeadLoop ();
> + }
> + DEBUG ((DEBUG_INFO, "CpuSmm: SpinLock Size = 0x%x, PreAllocateTokenNum = 0x%x\n", SpinLockSize, TokenCountPerChunk));
> +
> + gSmmCpuPrivate->CurrentTokenBuf = AllocatePool (SpinLockSize * TokenCountPerChunk);
> + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
> +
> + gSmmCpuPrivate->UsedTokenNum = 0;
> +
> gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof (PROCEDURE_WRAPPER) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);
> ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);
>
> InitializeListHead (&gSmmCpuPrivate->TokenList);
> + InitializeListHead (&gSmmCpuPrivate->OldTokenBufList);
> }
>
> /**
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> index 8c29f1a558..08ef8d2e15 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> @@ -217,6 +217,17 @@ typedef struct {
>
> #define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN, Link, PROCEDURE_TOKEN_SIGNATURE)
>
> +#define TOKEN_BUFFER_SIGNATURE SIGNATURE_32 ('T', 'K', 'B', 'S')
> +
> +typedef struct {
> + UINTN Signature;
> + LIST_ENTRY Link;
> +
> + UINT8 *Buffer;
> +} TOKEN_BUFFER;
> +
> +#define TOKEN_BUFFER_FROM_LINK(a) CR (a, TOKEN_BUFFER, Link, TOKEN_BUFFER_SIGNATURE)
> +
> //
> // Private structure for the SMM CPU module that is stored in DXE Runtime memory
> // Contains the SMM Configuration Protocols that is produced.
> @@ -243,6 +254,10 @@ typedef struct {
> PROCEDURE_WRAPPER *ApWrapperFunc;
> LIST_ENTRY TokenList;
>
> + LIST_ENTRY OldTokenBufList;
> +
> + UINT8 *CurrentTokenBuf;
> + UINTN UsedTokenNum; // Only record tokens used in CurrentTokenBuf.
> } SMM_CPU_PRIVATE_DATA;
>
> extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate;
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> index 851a8cb258..8b6c71b697 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> @@ -140,6 +140,7 @@
> gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask ## CONSUMES
> gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask ## CONSUMES
> gEfiMdePkgTokenSpaceGuid.PcdControlFlowEnforcementPropertyMask ## CONSUMES
> + gUefiCpuPkgTokenSpaceGuid.PcdTokenCountPerChunk ## CONSUMES
>
> [Depex]
> gEfiMpServiceProtocolGuid
> diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
> index 83acd33612..8ec2153459 100644
> --- a/UefiCpuPkg/UefiCpuPkg.dec
> +++ b/UefiCpuPkg/UefiCpuPkg.dec
> @@ -147,6 +147,10 @@
> # @Prompt Specify size of good stack of exception which need switching stack.
> gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize|2048|UINT32|0x30002001
>
> + ## Size of pre allocated token count per chunk.
> + # @Prompt Specify the size of pre allocated token count per chunk.
> + gUefiCpuPkgTokenSpaceGuid.PcdTokenCountPerChunk|64|UINT32|0x30002002
> +
> [PcdsFixedAtBuild, PcdsPatchableInModule]
> ## This value is the CPU Local APIC base address, which aligns the address on a 4-KByte boundary.
> # @Prompt Configure base address of CPU Local APIC
> diff --git a/UefiCpuPkg/UefiCpuPkg.uni b/UefiCpuPkg/UefiCpuPkg.uni
> index fbf7680726..3bb951cc72 100644
> --- a/UefiCpuPkg/UefiCpuPkg.uni
> +++ b/UefiCpuPkg/UefiCpuPkg.uni
> @@ -252,3 +252,4 @@
> "24000000 - 6th and 7th generation Intel Core processors and Intel Xeon W Processor Family(24MHz).<BR>\n"
> "19200000 - Intel Atom processors based on Goldmont Microarchitecture with CPUID signature 06_5CH(19.2MHz).<BR>\n"
>
> +#string STR_gUefiCpuPkgTokenSpaceGuid_PcdTokenCountPerChunk_PROMPT #language en-US "Specify the size of pre allocated token count per chunk.\n"
> \ No newline at end of file
>
(3) I think this would be the first PCD in the UNI file that does not
have _HELP, only _PROMPT. Is that OK? It seems like an inconsistency.
But, I'll let Ray decide.
With (1) fixed (either (1a) or (1b)):
Acked-by: Laszlo Ersek <lersek@redhat.com>
Thanks
Laszlo
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time
2019-12-04 9:20 ` Laszlo Ersek
@ 2019-12-05 0:25 ` Dong, Eric
0 siblings, 0 replies; 5+ messages in thread
From: Dong, Eric @ 2019-12-05 0:25 UTC (permalink / raw)
To: Laszlo Ersek, devel@edk2.groups.io; +Cc: Ni, Ray
Hi Laszlo,
> -----Original Message-----
> From: Laszlo Ersek [mailto:lersek@redhat.com]
> Sent: Wednesday, December 4, 2019 5:20 PM
> To: Dong, Eric <eric.dong@intel.com>; devel@edk2.groups.io
> Cc: Ni, Ray <ray.ni@intel.com>
> Subject: Re: [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token
> every time
>
> Hi Eric,
>
> I have three comments:
>
> On 12/04/19 09:05, Eric Dong wrote:
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
> >
> > Token is new introduced by MM MP Protocol. Current logic allocate
> > Token every time when need to use it. The logic caused SMI latency
> > raised to very high. Update logic to allocate Token buffer at driver's entry
> point.
> > Later use the token from the allocated token buffer. Only when all the
> > buffer have been used, then need to allocate new buffer.
> >
> > Signed-off-by: Eric Dong <eric.dong@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> > Cc: Laszlo Ersek <lersek@redhat.com>
> > ---
> > V3 changes:
> > Introduce PCD to control the pre allocated toke buffer size.
> >
> > v2 changes:
> > Minor update based on comments.
> >
> > UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 67
> ++++++++++++++++++--
> > UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 15 +++++
> > UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf | 1 +
> > UefiCpuPkg/UefiCpuPkg.dec | 4 ++
> > UefiCpuPkg/UefiCpuPkg.uni | 1 +
> > 5 files changed, 84 insertions(+), 4 deletions(-)
> >
> > diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> > b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> > index d8d2b6f444..33aad3f3e9 100644
> > --- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> > +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> > @@ -492,6 +492,24 @@ FreeTokens (
> > {
> > LIST_ENTRY *Link;
> > PROCEDURE_TOKEN *ProcToken;
> > + TOKEN_BUFFER *TokenBuf;
> > +
> > + //
> > + // Not free the buffer, just clear the UsedTokenNum. In order to
> > + // avoid triggering allocate action when we need to use the token,
> > + // do not free the buffer.
> > + //
> > + gSmmCpuPrivate->UsedTokenNum = 0;
> > +
> > + Link = GetFirstNode (&gSmmCpuPrivate->OldTokenBufList);
> > + while (!IsNull (&gSmmCpuPrivate->OldTokenBufList, Link)) {
> > + TokenBuf = TOKEN_BUFFER_FROM_LINK (Link);
> > +
> > + Link = RemoveEntryList (&TokenBuf->Link);
> > +
> > + FreePool (TokenBuf->Buffer);
> > + FreePool (TokenBuf);
> > + }
> >
> > while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {
> > Link = GetFirstNode (&gSmmCpuPrivate->TokenList); @@ -499,7
> > +517,6 @@ FreeTokens (
> >
> > RemoveEntryList (&ProcToken->Link);
> >
> > - FreePool ((VOID *)ProcToken->ProcedureToken);
> > FreePool (ProcToken);
> > }
> > }
> > @@ -1115,13 +1132,37 @@ CreateToken (
> > VOID
> > )
> > {
> > - PROCEDURE_TOKEN *ProcToken;
> > + PROCEDURE_TOKEN *ProcToken;
> > SPIN_LOCK *CpuToken;
> > UINTN SpinLockSize;
> > + TOKEN_BUFFER *TokenBuf;
> > + UINT32 TokenCountPerChunk;
> >
> > SpinLockSize = GetSpinLockProperties ();
> > - CpuToken = AllocatePool (SpinLockSize);
> > - ASSERT (CpuToken != NULL);
> > + TokenCountPerChunk = PcdGet32 (PcdTokenCountPerChunk);
>
> (1) I understand that the DEC file introduces the PCD as [PcdsFixedAtBuild]
> *only*. So, at this specific time, the code above is safe.
>
> But I'm worried that at a later time, we might relax that to a dynamic PCD,
> and then the above code will behave really badly. Therefore, please update
> the patch in one of two ways:
>
> (1a) please use a static global variable in the entry point function to cache the
> PCD, and then use that variable in place of the PCD everywhere,
>
> (1b) alternatively, please update the INF file, and the PcdGet32() calls too, to
> [FixedPcd] and FixedPcdGet32(). Then, if we happen to relax the PCD
> declaration to dynamic, and a platform actually tries to use that, they will get
> a build error. (And then they'll be forced to imlement
> (1a) above.)
>
> The idea is to make this as robust / safe as possible.
[[Eric]] Good suggestion. I will use 1b as the final solution for it.
>
> > +
> > + if (gSmmCpuPrivate->UsedTokenNum == TokenCountPerChunk) {
> > + DEBUG ((DEBUG_VERBOSE, "CpuSmm: No free token buffer, allocate
> > + new buffer!\n"));
> > +
> > + //
> > + // Record current token buffer for later free action usage.
> > + // Current used token buffer not in this list.
> > + //
> > + TokenBuf = AllocatePool (sizeof (TOKEN_BUFFER));
> > + ASSERT (TokenBuf != NULL);
> > + TokenBuf->Signature = TOKEN_BUFFER_SIGNATURE;
> > + TokenBuf->Buffer = gSmmCpuPrivate->CurrentTokenBuf;
> > +
> > + InsertTailList (&gSmmCpuPrivate->OldTokenBufList,
> > + &TokenBuf->Link);
> > +
> > + gSmmCpuPrivate->CurrentTokenBuf = AllocatePool (SpinLockSize *
> TokenCountPerChunk);
> > + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
> > + gSmmCpuPrivate->UsedTokenNum = 0; }
> > +
> > + CpuToken = (SPIN_LOCK *)(gSmmCpuPrivate->CurrentTokenBuf +
> > + SpinLockSize * gSmmCpuPrivate->UsedTokenNum);
> > + gSmmCpuPrivate->UsedTokenNum++;
> > +
> > InitializeSpinLock (CpuToken);
> > AcquireSpinLock (CpuToken);
> >
> > @@ -1737,10 +1778,28 @@ InitializeDataForMmMp (
> > VOID
> > )
> > {
> > + UINTN SpinLockSize;
> > + UINT32 TokenCountPerChunk;
> > +
> > + SpinLockSize = GetSpinLockProperties (); TokenCountPerChunk =
> > + PcdGet32 (PcdTokenCountPerChunk); ASSERT_EFI_ERROR
> > + (TokenCountPerChunk != 0); if (TokenCountPerChunk == 0) {
> > + DEBUG ((EFI_D_ERROR, "PcdTokenCountPerChunk should not be
> > + Zero!\n"));
>
> (2) This is a good check, but we should use DEBUG_ERROR, not EFI_D_ERROR.
[[Eric]] good catch, it's copy paste issue :). I will update it when I check in the code.
>
> > + CpuDeadLoop ();
> > + }
> > + DEBUG ((DEBUG_INFO, "CpuSmm: SpinLock Size = 0x%x,
> > + PreAllocateTokenNum = 0x%x\n", SpinLockSize, TokenCountPerChunk));
> > +
> > + gSmmCpuPrivate->CurrentTokenBuf = AllocatePool (SpinLockSize *
> > + TokenCountPerChunk); ASSERT (gSmmCpuPrivate->CurrentTokenBuf !=
> > + NULL);
> > +
> > + gSmmCpuPrivate->UsedTokenNum = 0;
> > +
> > gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof
> (PROCEDURE_WRAPPER) * gSmmCpuPrivate-
> >SmmCoreEntryContext.NumberOfCpus);
> > ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);
> >
> > InitializeListHead (&gSmmCpuPrivate->TokenList);
> > + InitializeListHead (&gSmmCpuPrivate->OldTokenBufList);
> > }
> >
> > /**
> > diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > index 8c29f1a558..08ef8d2e15 100644
> > --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > @@ -217,6 +217,17 @@ typedef struct {
> >
> > #define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN,
> Link,
> > PROCEDURE_TOKEN_SIGNATURE)
> >
> > +#define TOKEN_BUFFER_SIGNATURE SIGNATURE_32 ('T', 'K', 'B', 'S')
> > +
> > +typedef struct {
> > + UINTN Signature;
> > + LIST_ENTRY Link;
> > +
> > + UINT8 *Buffer;
> > +} TOKEN_BUFFER;
> > +
> > +#define TOKEN_BUFFER_FROM_LINK(a) CR (a, TOKEN_BUFFER, Link,
> > +TOKEN_BUFFER_SIGNATURE)
> > +
> > //
> > // Private structure for the SMM CPU module that is stored in DXE
> > Runtime memory // Contains the SMM Configuration Protocols that is
> produced.
> > @@ -243,6 +254,10 @@ typedef struct {
> > PROCEDURE_WRAPPER *ApWrapperFunc;
> > LIST_ENTRY TokenList;
> >
> > + LIST_ENTRY OldTokenBufList;
> > +
> > + UINT8 *CurrentTokenBuf;
> > + UINTN UsedTokenNum; // Only record tokens used in
> CurrentTokenBuf.
> > } SMM_CPU_PRIVATE_DATA;
> >
> > extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate; diff --git
> > a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> > b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> > index 851a8cb258..8b6c71b697 100644
> > --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> > +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
> > @@ -140,6 +140,7 @@
> >
> gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask
> ## CONSUMES
> > gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask
> ## CONSUMES
> > gEfiMdePkgTokenSpaceGuid.PcdControlFlowEnforcementPropertyMask
> ## CONSUMES
> > + gUefiCpuPkgTokenSpaceGuid.PcdTokenCountPerChunk ##
> CONSUMES
> >
> > [Depex]
> > gEfiMpServiceProtocolGuid
> > diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
> > index 83acd33612..8ec2153459 100644
> > --- a/UefiCpuPkg/UefiCpuPkg.dec
> > +++ b/UefiCpuPkg/UefiCpuPkg.dec
> > @@ -147,6 +147,10 @@
> > # @Prompt Specify size of good stack of exception which need switching
> stack.
> >
> >
> gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize|2048|UINT32|0
> x30002
> > 001
> >
> > + ## Size of pre allocated token count per chunk.
> > + # @Prompt Specify the size of pre allocated token count per chunk.
> > +
> > +
> gUefiCpuPkgTokenSpaceGuid.PcdTokenCountPerChunk|64|UINT32|0x3000
> 2002
> > +
> > [PcdsFixedAtBuild, PcdsPatchableInModule]
> > ## This value is the CPU Local APIC base address, which aligns the address
> on a 4-KByte boundary.
> > # @Prompt Configure base address of CPU Local APIC diff --git
> > a/UefiCpuPkg/UefiCpuPkg.uni b/UefiCpuPkg/UefiCpuPkg.uni index
> > fbf7680726..3bb951cc72 100644
> > --- a/UefiCpuPkg/UefiCpuPkg.uni
> > +++ b/UefiCpuPkg/UefiCpuPkg.uni
> > @@ -252,3 +252,4 @@
> > "24000000 - 6th and 7th
> generation Intel Core processors and Intel Xeon W Processor
> Family(24MHz).<BR>\n"
> > "19200000 - Intel Atom
> processors based on Goldmont Microarchitecture with CPUID signature
> 06_5CH(19.2MHz).<BR>\n"
> >
> > +#string
> STR_gUefiCpuPkgTokenSpaceGuid_PcdTokenCountPerChunk_PROMPT
> #language en-US "Specify the size of pre allocated token count per chunk.\n"
> > \ No newline at end of file
> >
>
> (3) I think this would be the first PCD in the UNI file that does not have _HELP,
> only _PROMPT. Is that OK? It seems like an inconsistency.
> But, I'll let Ray decide.
[[Eric]] I missed the _HELP, will add it when I check in the code.
Thanks,
Eric
>
> With (1) fixed (either (1a) or (1b)):
>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
>
> Thanks
> Laszlo
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-12-05 0:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-11-28 2:58 [PATCH] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time Dong, Eric
2019-11-28 4:43 ` [edk2-devel] " Ni, Ray
-- strict thread matches above, loose matches on Subject: below --
2019-12-04 8:05 Dong, Eric
2019-12-04 9:20 ` Laszlo Ersek
2019-12-05 0:25 ` Dong, Eric
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox