From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org,
philmd@redhat.com, samer.el-haj-mahmoud@arm.com,
andrey.warkentin@gmail.com
Subject: [edk2-platforms][PATCH v2 1/3] Platform/RPi/MmcDxe: Factorize SCR call and clean up MMC init
Date: Mon, 2 Dec 2019 17:16:20 +0000 [thread overview]
Message-ID: <20191202171622.10980-2-pete@akeo.ie> (raw)
In-Reply-To: <20191202171622.10980-1-pete@akeo.ie>
From: Andrei Warkentin <andrey.warkentin@gmail.com>
This is mostly a maintainability improvement for the
InitializeSdMmcDevice () call achieved by factorizing the
code related to SCR execution into a new SdExecuteScr () call.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/Drivers/MmcDxe/MmcIdentification.c | 105 ++++++++++++--------
1 file changed, 62 insertions(+), 43 deletions(-)
diff --git a/Platform/RaspberryPi/Drivers/MmcDxe/MmcIdentification.c b/Platform/RaspberryPi/Drivers/MmcDxe/MmcIdentification.c
index 4ee5c5ca6fb2..34a97e954220 100644
--- a/Platform/RaspberryPi/Drivers/MmcDxe/MmcIdentification.c
+++ b/Platform/RaspberryPi/Drivers/MmcDxe/MmcIdentification.c
@@ -1,5 +1,6 @@
/** @file
*
+ * Copyright (c) 2019, Andrei Warkentin <andrey.warkentin@gmail.com>
* Copyright (c) 2011-2015, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -567,6 +568,48 @@ SdSetSpeed (
return EFI_SUCCESS;
}
+STATIC
+EFI_STATUS
+SdExecuteScr (
+ IN MMC_HOST_INSTANCE *MmcHostInstance,
+ OUT SCR *Scr
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Response[4];
+ EFI_MMC_HOST_PROTOCOL *MmcHost = MmcHostInstance->MmcHost;
+
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD55,
+ MmcHostInstance->CardInfo.RCA << 16);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a (MMC_CMD55): Error and Status = %r\n", __FUNCTION__, Status));
+ return Status;
+ }
+ Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a (MMC_CMD55): Error and Status = %r\n", __FUNCTION__, Status));
+ return Status;
+ }
+ if ((Response[0] & MMC_STATUS_APP_CMD) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ /* SCR */
+ Status = MmcHost->SendCommand (MmcHost, MMC_ACMD51, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(MMC_ACMD51): Error and Status = %r\n", __func__, Status));
+ return Status;
+ }
+
+ Status = MmcHost->ReadBlockData (MmcHost, 0, 8, (VOID *) Scr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a(MMC_ACMD51): ReadBlockData Error and Status = %r\n", __func__, Status));
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
STATIC
EFI_STATUS
InitializeSdMmcDevice (
@@ -574,7 +617,6 @@ InitializeSdMmcDevice (
)
{
UINT32 Response[4];
- UINT32 Buffer[128];
UINTN BlockSize;
UINTN CardSize;
UINTN NumBlocks;
@@ -621,58 +663,35 @@ InitializeSdMmcDevice (
return Status;
}
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD55,
- MmcHostInstance->CardInfo.RCA << 16);
+ Status = SdExecuteScr (MmcHostInstance, &Scr);
if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a (MMC_CMD55): Error and Status = %r\n", __FUNCTION__, Status));
- return Status;
- }
- Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a (MMC_CMD55): Error and Status = %r\n", __FUNCTION__, Status));
- return Status;
- }
- if ((Response[0] & MMC_STATUS_APP_CMD) == 0) {
- return EFI_SUCCESS;
+ return Status;
}
- /* SCR */
- Status = MmcHost->SendCommand (MmcHost, MMC_ACMD51, 0);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a(MMC_ACMD51): Error and Status = %r\n", __func__, Status));
- return Status;
- } else {
- Status = MmcHost->ReadBlockData (MmcHost, 0, 8, Buffer);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a(MMC_ACMD51): ReadBlockData Error and Status = %r\n", __func__, Status));
- return Status;
- }
- CopyMem (&Scr, Buffer, 8);
- if (Scr.SD_SPEC == 2) {
- if (Scr.SD_SPEC3 == 1) {
- if (Scr.SD_SPEC4 == 1) {
- DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 4.xx\n"));
- } else {
- DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 3.0x\n"));
- }
+ if (Scr.SD_SPEC == 2) {
+ if (Scr.SD_SPEC3 == 1) {
+ if (Scr.SD_SPEC4 == 1) {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 4.xx\n"));
} else {
- if (Scr.SD_SPEC4 == 0) {
- DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 2.0\n"));
- } else {
- DEBUG ((DEBUG_ERROR, "Found invalid SD Card\n"));
- }
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 3.0x\n"));
}
} else {
- if ((Scr.SD_SPEC3 == 0) && (Scr.SD_SPEC4 == 0)) {
- if (Scr.SD_SPEC == 1) {
- DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 1.10\n"));
- } else {
- DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 1.0\n"));
- }
+ if (Scr.SD_SPEC4 == 0) {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 2.0\n"));
} else {
DEBUG ((DEBUG_ERROR, "Found invalid SD Card\n"));
}
}
+ } else {
+ if ((Scr.SD_SPEC3 == 0) && (Scr.SD_SPEC4 == 0)) {
+ if (Scr.SD_SPEC == 1) {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 1.10\n"));
+ } else {
+ DEBUG ((DEBUG_INFO, "Found SD Card for Spec Version 1.0\n"));
+ }
+ } else {
+ DEBUG ((DEBUG_ERROR, "Found invalid SD Card\n"));
+ }
}
Status = SdSetSpeed (MmcHostInstance, CccSwitch);
--
2.21.0.windows.1
next prev parent reply other threads:[~2019-12-02 17:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-02 17:16 [edk2-platforms][PATCH v2 0/3] Further RPi4 support groundwork Pete Batard
2019-12-02 17:16 ` Pete Batard [this message]
2019-12-02 17:16 ` [edk2-platforms][PATCH v2 2/3] Platform/RPi/MmcDxe: Improve MMC driver stability Pete Batard
2019-12-02 17:16 ` [edk2-platforms][PATCH v2 3/3] Platform/RPi: Set SD routing according to model Pete Batard
2019-12-02 17:43 ` [edk2-platforms][PATCH v2 0/3] Further RPi4 support groundwork Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191202171622.10980-2-pete@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox