[PATCH 21/79] MdeModulePkg/UsbMass: Fix various typos

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

From: Antoine Coeur <coeur@gmx.fr>

Fix various typos in comments and documentation.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
---
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h | 4 ++--
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h  | 4 ++--
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h  | 2 +-
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h | 2 +-
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 4 ++--
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c  | 4 ++--
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c  | 4 ++--
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c | 4 ++--
 8 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
index 2b89c92724a8..f34a41284e4c 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
@@ -77,7 +77,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
 // Mass command timeout, refers to specification[USB20-9.2.6.1]
 //
 // USB2.0 Spec define the up-limit timeout 5s for all command. USB floppy,
-// USB CD-Rom and iPod devices are much slower than USB key when reponse
+// USB CD-Rom and iPod devices are much slower than USB key when response
 // most of commands, So we set 5s as timeout here.
 //
 #define USB_BOOT_GENERAL_CMD_TIMEOUT    (5 * USB_MASS_1_SECOND)
@@ -213,7 +213,7 @@ typedef struct {
   This function get the parameters for the USB mass storage media,
   It is used both to initialize the media during the Start() phase
   of Driver Binding Protocol and to re-initialize it when the media is
-  changed. Althought the RemoveableMedia is unlikely to change,
+  changed. Although the RemoveableMedia is unlikely to change,
   it is also included here.
 
   @param  UsbMass                The device to retrieve disk gemotric.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h
index ea03cf7e2fd4..3ef8f240a2c1 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h
@@ -14,14 +14,14 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
 extern USB_MASS_TRANSPORT mUsbBotTransport;
 
 //
-// Usb Bulk-Only class specfic request
+// Usb Bulk-Only class specific request
 //
 #define USB_BOT_RESET_REQUEST    0xFF       ///< Bulk-Only Mass Storage Reset
 #define USB_BOT_GETLUN_REQUEST   0xFE       ///< Get Max Lun
 #define USB_BOT_CBW_SIGNATURE    0x43425355 ///< dCBWSignature, tag the packet as CBW
 #define USB_BOT_CSW_SIGNATURE    0x53425355 ///< dCSWSignature, tag the packet as CSW
 #define USB_BOT_MAX_LUN          0x0F       ///< Lun number is from 0 to 15
-#define USB_BOT_MAX_CMDLEN       16         ///< Maxium number of command from command set
+#define USB_BOT_MAX_CMDLEN       16         ///< Maximum number of command from command set
 
 //
 // Usb BOT command block status values
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h
index 287c0330f61e..b79b9c243630 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h
@@ -1,5 +1,5 @@
 /** @file
-  Defination for the USB mass storage Control/Bulk/Interrupt (CBI) transport,
+  Definition for the USB mass storage Control/Bulk/Interrupt (CBI) transport,
   according to USB Mass Storage Class Control/Bulk/Interrupt (CBI) Transport, Revision 1.1.
 
 Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h
index 9f63deeae3db..283bed7055a0 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h
@@ -48,7 +48,7 @@ USBMassDriverBindingSupported (
 /**
   Starts the USB mass storage device with this driver.
 
-  This function consumes USB I/O Portocol, intializes USB mass storage device,
+  This function consumes USB I/O Protocol, initializes USB mass storage device,
   installs Block I/O Protocol, and submits Asynchronous Interrupt
   Transfer to manage the USB mass storage device.
 
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
index 600896b6a214..aab4061e183c 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
@@ -197,7 +197,7 @@ UsbBootExecCmd (
 
   //
   // If ExecCommand() returns no error and CmdResult is success,
-  // then the commnad transfer is successful.
+  // then the command transfer is successful.
   //
   if ((CmdResult == USB_MASS_CMD_SUCCESS) && !EFI_ERROR (Status)) {
     return EFI_SUCCESS;
@@ -610,7 +610,7 @@ UsbScsiModeSense (
   This function get the parameters for the USB mass storage media,
   It is used both to initialize the media during the Start() phase
   of Driver Binding Protocol and to re-initialize it when the media is
-  changed. Althought the RemoveableMedia is unlikely to change,
+  changed. Although the RemoveableMedia is unlikely to change,
   it is also included here.
 
   @param  UsbMass                The device to retrieve disk gemotric.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
index 98d2ba99688b..1e878a1bdd1d 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
@@ -326,7 +326,7 @@ UsbBotGetStatus (
 
   for (Index = 0; Index < USB_BOT_RECV_CSW_RETRY; Index++) {
     //
-    // Attemp to the read Command Status Wrapper from bulk in endpoint
+    // Attempt to the read Command Status Wrapper from bulk in endpoint
     //
     ZeroMem (&Csw, sizeof (USB_BOT_CSW));
     Result = 0;
@@ -553,7 +553,7 @@ UsbBotGetMaxLun (
   UsbBot = (USB_BOT_PROTOCOL *) Context;
 
   //
-  // Issue a class specific Bulk-Only Mass Storage get max lun reqest.
+  // Issue a class specific Bulk-Only Mass Storage get max lun request.
   // according to section 3.2 of USB Mass Storage Class Bulk-Only Transport Spec, v1.0.
   //
   Request.RequestType = 0xA1;
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c
index 1e5508c75674..477f0536d673 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c
@@ -305,7 +305,7 @@ UsbCbiDataTransfer (
       if (TransStatus == EFI_USB_ERR_NAK) {
         //
         // The device can NAK the host if either the data/buffer isn't
-        // aviable or the command is in-progress.
+        // available or the command is in-progress.
         // If data are partially transferred, we just ignore NAK and continue.
         // If all data have been transferred and status is NAK, then we retry for several times.
         // If retry exceeds the USB_CBI_MAX_RETRY, then return error status.
@@ -378,7 +378,7 @@ UsbCbiGetStatus (
   Timeout   = Timeout / USB_MASS_1_MILLISECOND;
 
   //
-  // Attemp to the read the result from interrupt endpoint
+  // Attempt to the read the result from interrupt endpoint
   //
   for (Retry = 0; Retry < USB_CBI_MAX_RETRY; Retry++) {
     TransStatus = 0;
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
index 0dcbc5da2cb8..bbd19e044748 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
@@ -367,7 +367,7 @@ UsbMassInitMedia (
 }
 
 /**
-  Initilize the USB Mass Storage transport.
+  Initialize the USB Mass Storage transport.
 
   This function tries to find the matching USB Mass Storage transport
   protocol for USB device. If found, initializes the matching transport.
@@ -770,7 +770,7 @@ ON_EXIT:
 /**
   Starts the USB mass storage device with this driver.
 
-  This function consumes USB I/O Portocol, intializes USB mass storage device,
+  This function consumes USB I/O Protocol, initializes USB mass storage device,
   installs Block I/O Protocol, and submits Asynchronous Interrupt
   Transfer to manage the USB mass storage device.
 
-- 
2.21.0