From: "Bob Feng" <bob.c.feng@intel.com>
To: devel@edk2.groups.io
Cc: Liming Gao <liming.gao@intel.com>, Steven Shi <steven.shi@intel.com>
Subject: [Patch 3/4 V6] BaseTools: Update build_rule.txt to generate dependent files.
Date: Fri, 6 Dec 2019 23:26:57 +0800 [thread overview]
Message-ID: <20191206152658.26476-4-bob.c.feng@intel.com> (raw)
In-Reply-To: <20191206152658.26476-1-bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Enable the dependent files generation function for compilers
and Trim tool.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
---
BaseTools/Conf/build_rule.template | 96 +++++++++++++++++-------------
1 file changed, 54 insertions(+), 42 deletions(-)
diff --git a/BaseTools/Conf/build_rule.template b/BaseTools/Conf/build_rule.template
index 84d8426e7d..51748bc065 100755
--- a/BaseTools/Conf/build_rule.template
+++ b/BaseTools/Conf/build_rule.template
@@ -79,10 +79,12 @@
# For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
# to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
# will be generated only when this macro is used in command line.
# This is intended to get over the long command line limitation.
# )
+# $(DEPS_FLAGS) This is a tool flag to have c compiler generate dependent header file list for a source file.
+# To enable incremental build, this flag must apply to $(CC), $(VFRPP), $(PP), $(ASLCC) and $(ASLPP).
#
# $(CP) copy command
# $(MV) move command
# $(RM) delete command
# $(MD) create dir command
@@ -121,18 +123,18 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
<Command.MSFT, Command.INTEL>
- "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
+ "$(CC)" /Fo${dst} $(DEPS_FLAGS) $(CC_FLAGS) $(INC) ${src}
<Command.GCC, Command.RVCT>
# For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
- "$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
+ "$(CC)" $(DEPS_FLAGS) $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
<Command.XCODE>
- "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
+ "$(CC)" $(DEPS_FLAGS) $(CC_FLAGS) -o ${dst} $(INC) ${src}
[C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64,C-Code-File.BASE.ARM,C-Code-File.SEC.ARM,C-Code-File.PEI_CORE.ARM,C-Code-File.PEIM.ARM]
<InputFile>
?.c
@@ -165,19 +167,21 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
<Command.MSFT, Command.INTEL>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iiii ${d_path}(+)${s_base}.ii
+ "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iiii
<Command.GCC, Command.RVCT>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iiii ${d_path}(+)${s_base}.ii
# For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
- "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
+ "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iiii
[Assembly-Code-File.COMMON.ARM,Assembly-Code-File.COMMON.AARCH64]
# Remove --convert-hex for ARM as it breaks MSFT assemblers
<InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
?.asm, ?.Asm, ?.ASM
@@ -190,24 +194,27 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
<Command.INTEL>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iiii ${d_path}(+)${s_base}.ii
+ "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iiii
<Command.MSFT>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code --trim-long -o ${d_path}(+)${s_base}.iiii ${d_path}(+)${s_base}.ii
+ "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iiii
<Command.GCC, Command.RVCT>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iiii ${d_path}(+)${s_base}.ii
# For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
- "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
+ "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iiii
[Nasm-Assembly-Code-File.COMMON.COMMON]
<InputFile>
?.nasm
@@ -216,12 +223,13 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
<Command>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.ii
"$(NASM)" -I${s_path}(+) $(NASM_INC) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
[Device-Tree-Source-File]
<InputFile>
?.dts
@@ -247,11 +255,11 @@
<OutputFile>
$(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
<Command>
- "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
+ "$(VFRPP)" $(DEPS_FLAGS) $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
"$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
[Object-File]
<InputFile>
*.obj
@@ -398,11 +406,11 @@
<ExtraDependency>
$(MAKE_FILE)
<Command>
- "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
+ "$(PP)" $(DEPS_FLAGS) $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
[Acpi-Source-Language-File]
<InputFile>
@@ -413,18 +421,18 @@
<ExtraDependency>
$(MAKE_FILE)
<Command.MSFT, Command.INTEL>
- Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
- "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+ Trim --asl-file --asl-deps -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(ASLPP)" $(DEPS_FLAGS) $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
"$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
<Command.GCC>
- Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
- "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
+ Trim --asl-file --asl-deps -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(ASLPP)" $(DEPS_FLAGS) $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
"$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
[C-Code-File.AcpiTable]
<InputFile>
@@ -435,16 +443,16 @@
<ExtraDependency>
$(MAKE_FILE)
<Command.MSFT, Command.INTEL>
- "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLCC)" $(DEPS_FLAGS) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(DEPS_FLAGS) $(INC) ${src}
"$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
<Command.GCC>
- "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLCC)" $(DEPS_FLAGS) -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(DEPS_FLAGS) $(INC) ${src}
"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
[Acpi-Table-Code-File]
<InputFile>
@@ -455,26 +463,26 @@
<ExtraDependency>
$(MAKE_FILE)
<Command.MSFT, Command.INTEL>
- "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLCC)" $(DEPS_FLAGS) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(DEPS_FLAGS) $(INC) ${src}
"$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
<Command.GCC>
- "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLCC)" $(DEPS_FLAGS) -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(DEPS_FLAGS) $(INC) ${src}
"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS)
"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
<Command.CLANGPDB>
- "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLCC)" $(DEPS_FLAGS) -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(DEPS_FLAGS) $(INC) ${src}
"$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
<Command.XCODE>
- "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
+ "$(ASLCC)" $(DEPS_FLAGS) -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(DEPS_FLAGS) $(INC) ${src}
"$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
"$(MTOC)" -subsystem $(MODULE_TYPE) $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.pecoff
"$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.pecoff $(GENFW_FLAGS)
@@ -487,25 +495,28 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_base}.com
<Command.MSFT, Command.INTEL>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.ii
cd $(OUTPUT_DIR)(+)${s_dir}
"$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
"$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
<Command.GCC>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ Trim --asm-file -o {d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.ii
"$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
"$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
<Command.XCODE>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.ii
"$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
"$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
@@ -518,13 +529,14 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_base}.bin
<Command>
- "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
- Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
- "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
+ Trim --asm-file -o ${d_path}(+)${s_base}.i -i $(INC_LIST) ${src}
+ "$(PP)" $(DEPS_FLAGS) $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.ii
+ Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.ii
+ "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) $(NASM_INC) -o $dst ${d_path}(+)${s_base}.iii
# copy the output file with .com postfix that be same to the output file of .asm16
$(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
[Microcode-File.USER_DEFINED, Microcode-File.Microcode]
<InputFile>
@@ -621,11 +633,11 @@
<OutputFile>
$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
<Command>
- "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
+ "$(VFRPP)" $(DEPS_FLAGS) $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
"$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
[Hii-Binary-Package.UEFI_HII]
<InputFile>
*.hpk
--
2.20.1.windows.1
next prev parent reply other threads:[~2019-12-06 15:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-06 15:26 [Patch 0/4 V6] Enhance Incremental Build Bob Feng
2019-12-06 15:26 ` [Patch 1/4 V6] BaseTools: Add build option for dependency file generation Bob Feng
2019-12-16 14:13 ` [edk2-devel] " Anthony PERARD
2019-12-16 23:30 ` Michael D Kinney
2019-12-17 0:25 ` Bob Feng
2019-12-18 2:31 ` Bob Feng
2019-12-06 15:26 ` [Patch 2/4 V6] BaseTools: Generate dependent files for ASL and ASM files Bob Feng
2019-12-06 15:26 ` Bob Feng [this message]
2019-12-06 15:26 ` [Patch 4/4 V6] BaseTools: Enhance Basetool for incremental build Bob Feng
2019-12-08 23:35 ` [edk2-devel] [Patch 0/4 V6] Enhance Incremental Build Liming Gao
2019-12-09 5:44 ` Bob Feng
2019-12-10 1:40 ` Bob Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191206152658.26476-4-bob.c.feng@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox