From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org, philmd@redhat.com
Subject: [edk2-platforms][PATCH 2/6] Platform/RPi4: Improve FADT ACPI table generation
Date: Wed, 18 Dec 2019 11:41:52 +0000 [thread overview]
Message-ID: <20191218114156.9036-3-pete@akeo.ie> (raw)
In-Reply-To: <20191218114156.9036-1-pete@akeo.ie>
Use a proper aslc source to build the table.
Note that we use ACPI 5.1 for this table to match the MADT
constraints.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/RPi4/AcpiTables/Fadt.aslc | 104 ++++++++++++++------
1 file changed, 76 insertions(+), 28 deletions(-)
diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/Fadt.aslc b/Platform/RaspberryPi/RPi4/AcpiTables/Fadt.aslc
index 3ef877fde5f4..2d851794b989 100644
--- a/Platform/RaspberryPi/RPi4/AcpiTables/Fadt.aslc
+++ b/Platform/RaspberryPi/RPi4/AcpiTables/Fadt.aslc
@@ -2,6 +2,7 @@
*
* Fixed ACPI Description Table (FADT)
*
+ * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
* Copyright (c) 2018, Andrey Warkentin <andrey.warkentin@gmail.com>
* Copyright (c) Microsoft Corporation. All rights reserved.
*
@@ -9,34 +10,81 @@
*
**/
-UINT8 Fadt[268] = {
- 0x46, 0x41, 0x43, 0x50, 0x0C, 0x01, 0x00, 0x00, 0x05, 0x00, /* 0 */
- 0x42, 0x43, 0x32, 0x38, 0x33, 0x36, 0x45, 0x44, 0x4B, 0x32, /* 10 */
- 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53, /* 20 */
- 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, /* 40 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 50 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
- 0x00, 0x04, 0x00, 0x00, 0x00, 0xE3, 0x00, 0x00, 0x00, 0x00, /* 90 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, /* 100 */
- 0x00, 0x00, 0x21, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, /* 110 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, /* 120 */
- 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 130 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 140 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 150 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 160 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 170 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 180 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 190 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 200 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 210 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 220 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 230 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 240 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 250 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 /* 268 */
+#include <IndustryStandard/Acpi.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#define RPI_DSDT_BASE_ADDRESS 0x33CD0000
+#define RPI_PM_TIMER_BLOCK_LEN 0x04
+#define RPI_CST_VALUE 0xE3
+
+/*
+ * Note: Use ACPI 5.1 since we need to match MADT ACPI requirements
+ */
+EFI_ACPI_5_1_FIXED_ACPI_DESCRIPTION_TABLE Fadt = {
+ ACPI_HEADER (
+ EFI_ACPI_5_1_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE,
+ EFI_ACPI_5_1_FIXED_ACPI_DESCRIPTION_TABLE,
+ EFI_ACPI_5_1_FIXED_ACPI_DESCRIPTION_TABLE_REVISION
+ ),
+ 0, // UINT32 FirmwareCtrl
+ RPI_DSDT_BASE_ADDRESS, // UINT32 Dsdt
+ EFI_ACPI_RESERVED_BYTE, // UINT8 Reserved0
+ EFI_ACPI_5_1_PM_PROFILE_APPLIANCE_PC, // UINT8 PreferredPmProfile
+ 0, // UINT16 SciInt
+ 0, // UINT32 SmiCmd
+ 0, // UINT8 AcpiEnable
+ 0, // UINT8 AcpiDisable
+ 0, // UINT8 S4BiosReq
+ 0, // UINT8 PstateCnt
+ 0, // UINT32 Pm1aEvtBlk
+ 0, // UINT32 Pm1bEvtBlk
+ 0, // UINT32 Pm1aCntBlk
+ 0, // UINT32 Pm1bCntBlk
+ 0, // UINT32 Pm2CntBlk
+ 0, // UINT32 PmTmrBlk
+ 0, // UINT32 Gpe0Blk
+ 0, // UINT32 Gpe1Blk
+ 0, // UINT8 Pm1EvtLen
+ 0, // UINT8 Pm1CntLen
+ 0, // UINT8 Pm2CntLen
+ RPI_PM_TIMER_BLOCK_LEN, // UINT8 PmTmrLen
+ 0, // UINT8 Gpe0BlkLen
+ 0, // UINT8 Gpe1BlkLen
+ 0, // UINT8 Gpe1Base
+ RPI_CST_VALUE, // UINT8 CstCnt
+ 0, // UINT16 PLvl2Lat
+ 0, // UINT16 PLvl3Lat
+ 0, // UINT16 FlushSize
+ 0, // UINT16 FlushStride
+ 0, // UINT8 DutyOffset
+ 0, // UINT8 DutyWidth
+ 0, // UINT8 DayAlrm
+ 0, // UINT8 MonAlrm
+ 0, // UINT8 Century
+ EFI_ACPI_5_1_VGA_NOT_PRESENT | EFI_ACPI_5_1_MSI_NOT_SUPPORTED | // UINT16 IaPcBootArch
+ EFI_ACPI_5_1_PCIE_ASPM_CONTROLS | EFI_ACPI_5_1_CMOS_RTC_NOT_PRESENT,
+ EFI_ACPI_RESERVED_BYTE, // UINT8 Reserved1
+ EFI_ACPI_5_1_WBINVD | EFI_ACPI_5_1_SLP_BUTTON | // UINT32 Flags
+ EFI_ACPI_5_1_HW_REDUCED_ACPI,
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE ResetReg
+ 0, // UINT8 ResetValue
+ EFI_ACPI_5_1_ARM_PSCI_COMPLIANT, // UINT16 ArmBootArchFlags
+ EFI_ACPI_5_1_FIXED_ACPI_DESCRIPTION_TABLE_MINOR_REVISION, // UINT8 MinorRevision
+ 0, // UINT64 XFirmwareCtrl
+ RPI_DSDT_BASE_ADDRESS, // UINT64 XDsdt
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XPm1aEvtBlk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XPm1bEvtBlk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XPm1aCntBlk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XPm1bCntBlk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XPm2CntBlk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XPmTmrBlk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XGpe0Blk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE XGpe1Blk
+ NULL_GAS, // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE SleepControlReg
+ NULL_GAS // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE SleepStatusReg
};
//
--
2.21.0.windows.1
next prev parent reply other threads:[~2019-12-18 11:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 11:41 [edk2-platforms][PATCH 0/6] Platform/RPi4: ACPI improvements Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 1/6] Platform/RPi4: Clean up ACPI definitions Pete Batard
2019-12-18 11:41 ` Pete Batard [this message]
2019-12-18 14:46 ` [edk2-platforms][PATCH 2/6] Platform/RPi4: Improve FADT ACPI table generation Ard Biesheuvel
2019-12-18 16:31 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 3/6] Platform/RPi4: Improve SPCR and DBG2 " Pete Batard
2019-12-18 15:57 ` Philippe Mathieu-Daudé
2019-12-18 16:36 ` Pete Batard
2019-12-18 17:00 ` Philippe Mathieu-Daudé
2019-12-18 17:10 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 4/6] Platform/RPi4: Add switch to select between PL011 and miniUART Pete Batard
2019-12-18 16:05 ` Philippe Mathieu-Daudé
2019-12-18 16:59 ` [edk2-devel] " Pete Batard
2019-12-18 17:05 ` Philippe Mathieu-Daudé
2019-12-18 11:41 ` [edk2-platforms][PATCH 5/6] Platform/RPi4: Add XHCI and MCFG ACPI tables Pete Batard
2019-12-18 14:55 ` Ard Biesheuvel
2019-12-18 16:31 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 6/6] Platform/RPi4: Add ACPI basic mode build option Pete Batard
2019-12-18 12:10 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191218114156.9036-3-pete@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox