From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org, philmd@redhat.com
Subject: [edk2-platforms][PATCH 3/6] Platform/RPi4: Improve SPCR and DBG2 ACPI table generation
Date: Wed, 18 Dec 2019 11:41:53 +0000 [thread overview]
Message-ID: <20191218114156.9036-4-pete@akeo.ie> (raw)
In-Reply-To: <20191218114156.9036-1-pete@akeo.ie>
Use code derived from JunoPkg to generate our serial tables and
also use PCDs where possible.
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf | 4 +-
Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc | 100 +++++++++++++++++---
Platform/RaspberryPi/RPi4/AcpiTables/Spcr.asl | 48 ----------
Platform/RaspberryPi/RPi4/AcpiTables/Spcr.aslc | 94 ++++++++++++++++++
4 files changed, 183 insertions(+), 63 deletions(-)
diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf b/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
index 50c9f7694d84..6b1155d66444 100644
--- a/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
+++ b/Platform/RaspberryPi/RPi4/AcpiTables/AcpiTables.inf
@@ -31,7 +31,7 @@ [Sources]
Gtdt.aslc
Dsdt.asl
Csrt.aslc
- Spcr.asl
+ Spcr.aslc
[Packages]
ArmPkg/ArmPkg.dec
@@ -47,4 +47,6 @@ [FixedPcd]
gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
gArmTokenSpaceGuid.PcdGicDistributorBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc b/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
index 849cf5134793..589a5c2cbd71 100644
--- a/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
+++ b/Platform/RaspberryPi/RPi4/AcpiTables/Dbg2.aslc
@@ -2,27 +2,99 @@
*
* Debug Port Table (DBG2)
*
- * Copyright (c) Microsoft Corporation. All rights reserved.
+ * Copyright (c) 2019, Pete Batard <pete@akeo.ie>
+ * Copyright (c) 2012-2016, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
**/
-UINT8 Dbg2[92] = {
- 0x44, 0x42, 0x47, 0x32, 0x5C, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x4D, 0x53, 0x46, 0x54, 0x20, 0x20, 0x45, 0x44, 0x4B, 0x32,
- 0x20, 0x20, 0x20, 0x20, 0x01, 0x00, 0x00, 0x00, 0x4D, 0x53,
- 0x46, 0x54, 0x01, 0x00, 0x00, 0x00, 0x2C, 0x00, 0x00, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x01, 0x0A, 0x00,
- 0x26, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x80, 0x10, 0x00,
- 0x00, 0x00, 0x16, 0x00, 0x22, 0x00, 0x00, 0x20, 0x00, 0x10,
- 0x00, 0x50, 0x21, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x6C, 0x00,
- 0x00, 0x00, '\\', '_', 'S', 'B', '.', 'U', 'R', 'T',
- 'M', 0x00,
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/DebugPort2Table.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+#pragma pack(1)
+
+#define RPI_DBG2_NUM_DEBUG_PORTS 1
+#define RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1
+#define RPI_DBG2_NAMESPACESTRING_FIELD_SIZE 10
+
+//
+// When using the miniUART, PcdSerialRegisterBase points to the 8250 base address,
+// which is offset by 0x40 from the actual Bcm2835 base address
+//
+#define RPI_UART_BASE_ADDRESS (FixedPcdGet64 (PcdSerialRegisterBase) - 0x40)
+#define RPI_UART_LENGTH 0x70
+//
+// RPI_UART_STR should match the value used Uart.asl
+//
+#define RPI_UART_STR { '\\', '_', 'S', 'B', '.', 'U', 'R', 'T', 'M', 0x00 }
+
+typedef struct {
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
+ EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister;
+ UINT32 AddressSize;
+ UINT8 NameSpaceString[RPI_DBG2_NAMESPACESTRING_FIELD_SIZE];
+} DBG2_DEBUG_DEVICE_INFORMATION;
+
+typedef struct {
+ EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
+ DBG2_DEBUG_DEVICE_INFORMATION Dbg2DeviceInfo[RPI_DBG2_NUM_DEBUG_PORTS];
+} DBG2_TABLE;
+
+
+#define DBG2_DEBUG_PORT_DDI(NumReg, SubType, UartBase, UartAddrLen, UartNameStr) { \
+ { \
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, /* UINT8 Revision */ \
+ sizeof (DBG2_DEBUG_DEVICE_INFORMATION), /* UINT16 Length */ \
+ NumReg, /* UINT8 NumberofGenericAddressRegisters */ \
+ RPI_DBG2_NAMESPACESTRING_FIELD_SIZE, /* UINT16 NameSpaceStringLength */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), /* UINT16 NameSpaceStringOffset */ \
+ 0, /* UINT16 OemDataLength */ \
+ 0, /* UINT16 OemDataOffset */ \
+ EFI_ACPI_DBG2_PORT_TYPE_SERIAL, /* UINT16 Port Type */ \
+ SubType, /* UINT16 Port Subtype */ \
+ {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, /* UINT8 Reserved[2] */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), /* UINT16 BaseAddressRegister Offset */ \
+ OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) /* UINT16 AddressSize Offset */ \
+ }, \
+ ARM_GAS32 (UartBase), /* EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \
+ UartAddrLen, /* UINT32 AddressSize */ \
+ UartNameStr /* UINT8 NameSpaceString[MAX_DBG2_NAME_LEN] */ \
+ }
+
+
+STATIC DBG2_TABLE Dbg2 = {
+ {
+ ACPI_HEADER (
+ EFI_ACPI_5_1_DEBUG_PORT_2_TABLE_SIGNATURE,
+ DBG2_TABLE,
+ EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
+ ),
+ OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
+ RPI_DBG2_NUM_DEBUG_PORTS /* UINT32 NumberDbgDeviceInfo */
+ },
+ {
+ /*
+ * Kernel Debug Port
+ */
+ DBG2_DEBUG_PORT_DDI (
+ RPI_DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
+ EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART,
+ RPI_UART_BASE_ADDRESS,
+ RPI_UART_LENGTH,
+ RPI_UART_STR
+ ),
+ }
};
+#pragma pack()
+
//
-// Reference the table being generated to prevent the optimizer from removing the
-// data structure from the executable
+// Reference the table being generated to prevent the optimizer from removing
+// the data structure from the executable
//
VOID* CONST ReferenceAcpiTable = &Dbg2;
diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/Spcr.asl b/Platform/RaspberryPi/RPi4/AcpiTables/Spcr.asl
deleted file mode 100644
index 4632a4f193e7..000000000000
--- a/Platform/RaspberryPi/RPi4/AcpiTables/Spcr.asl
+++ /dev/null
@@ -1,48 +0,0 @@
-/** @file
- *
- * Serial Port Console Redirection Table (SPCR)
- *
- * Copyright (c) 2019, ARM Ltd. All rights reserved.
- * Copyright (c) 2017-2018, Andrey Warkentin <andrey.warkentin@gmail.com>
- *
- * SPDX-License-Identifier: BSD-2-Clause-Patent
- *
- **/
-
-[000h 0000 4] Signature : "SPCR" [Serial Port Console Redirection table]
-[004h 0004 4] Table Length : 00000050
-[008h 0008 1] Revision : 02
-[009h 0009 1] Checksum : 00
-[00Ah 0010 6] Oem ID : "RPiEFI"
-[010h 0016 8] Oem Table ID : "RPi4UEFI"
-[018h 0024 4] Oem Revision : 00000001
-[01Ch 0028 4] Asl Compiler ID : "----"
-[020h 0032 4] Asl Compiler Revision : 00000000
-
-[024h 0036 1] Interface Type : 10 // 0x03 = PL011, 0x10 = BCM2835
-[025h 0037 3] Reserved : 000000
-
-[028h 0040 12] Serial Port Register : [Generic Address Structure]
-[028h 0040 1] Space ID : 00 [SystemMemory]
-[029h 0041 1] Bit Width : 20
-[02Ah 0042 1] Bit Offset : 00
-[02Bh 0043 1] Encoded Access Width : 03 [DWord Access:32]
-[02Ch 0044 8] Address : FE215000
-
-[034h 0052 1] Interrupt Type : 08 // ARMH GIC interrupt
-[035h 0053 1] PCAT-compatible IRQ : 00
-[036h 0054 4] Interrupt : 7D
-[03Ah 0058 1] Baud Rate : 07 // 115200
-[03Bh 0059 1] Parity : 00
-[03Ch 0060 1] Stop Bits : 01
-[03Dh 0061 1] Flow Control : 00
-[03Eh 0062 1] Terminal Type : 02 // VT-UTF8
-[04Ch 0076 1] Reserved : 00
-[040h 0064 2] PCI Device ID : FFFF
-[042h 0066 2] PCI Vendor ID : FFFF
-[044h 0068 1] PCI Bus : 00
-[045h 0069 1] PCI Device : 00
-[046h 0070 1] PCI Function : 00
-[047h 0071 4] PCI Flags : 00000000
-[04Bh 0075 1] PCI Segment : 00
-[04Ch 0076 4] Reserved : 00000000
diff --git a/Platform/RaspberryPi/RPi4/AcpiTables/Spcr.aslc b/Platform/RaspberryPi/RPi4/AcpiTables/Spcr.aslc
new file mode 100644
index 000000000000..65f48ceae688
--- /dev/null
+++ b/Platform/RaspberryPi/RPi4/AcpiTables/Spcr.aslc
@@ -0,0 +1,94 @@
+/** @file
+* SPCR Table
+*
+* Copyright (c) 2019 Pete Batard <pete@akeo.ie>
+* Copyright (c) 2014-2016, ARM Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#include <IndustryStandard/Acpi.h>
+#include <IndustryStandard/SerialPortConsoleRedirectionTable.h>
+#include <Library/AcpiLib.h>
+#include <Library/PcdLib.h>
+
+#include "AcpiTables.h"
+
+
+#define RPI_UART_FLOW_CONTROL_NONE 0
+
+//
+// When using the miniUART, PcdSerialRegisterBase points to the 8250 base address,
+// which is offset by 0x40 from the actual Bcm2835 base address
+//
+#define RPI_UART_BASE_ADDRESS (FixedPcdGet64 (PcdSerialRegisterBase) - 0x40)
+#define RPI_UART_INTERRUPT 0x7D
+
+STATIC EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE Spcr = {
+ ACPI_HEADER (
+ EFI_ACPI_5_1_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE,
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_REVISION
+ ),
+ // UINT8 InterfaceType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_BCM2835_UART,
+ // UINT8 Reserved1[3];
+ {
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE,
+ EFI_ACPI_RESERVED_BYTE
+ },
+ // EFI_ACPI_5_1_GENERIC_ADDRESS_STRUCTURE BaseAddress;
+ ARM_GAS32 (RPI_UART_BASE_ADDRESS),
+ // UINT8 InterruptType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERRUPT_TYPE_GIC,
+ // UINT8 Irq;
+ 0, // Not used on ARM
+ // UINT32 GlobalSystemInterrupt;
+ RPI_UART_INTERRUPT,
+ // UINT8 BaudRate;
+#if (FixedPcdGet64 (PcdUartDefaultBaudRate) == 9600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_9600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 19200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_19200,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 57600)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_57600,
+#elif (FixedPcdGet64 (PcdUartDefaultBaudRate) == 115200)
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_BAUD_RATE_115200,
+#else
+#error Unsupported SPCR Baud Rate
+#endif
+ // UINT8 Parity;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_PARITY_NO_PARITY,
+ // UINT8 StopBits;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_STOP_BITS_1,
+ // UINT8 FlowControl;
+ RPI_UART_FLOW_CONTROL_NONE,
+ // UINT8 TerminalType;
+ EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_TERMINAL_TYPE_VT_UTF8,
+ // UINT8 Reserved2;
+ EFI_ACPI_RESERVED_BYTE,
+ // UINT16 PciDeviceId;
+ 0xFFFF,
+ // UINT16 PciVendorId;
+ 0xFFFF,
+ // UINT8 PciBusNumber;
+ 0x00,
+ // UINT8 PciDeviceNumber;
+ 0x00,
+ // UINT8 PciFunctionNumber;
+ 0x00,
+ // UINT32 PciFlags;
+ 0x00000000,
+ // UINT8 PciSegment;
+ 0x00,
+ // UINT32 Reserved3;
+ EFI_ACPI_RESERVED_DWORD
+};
+
+//
+// Reference the table being generated to prevent the optimizer from removing the
+// data structure from the executable
+//
+VOID* CONST ReferenceAcpiTable = &Spcr;
--
2.21.0.windows.1
next prev parent reply other threads:[~2019-12-18 11:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 11:41 [edk2-platforms][PATCH 0/6] Platform/RPi4: ACPI improvements Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 1/6] Platform/RPi4: Clean up ACPI definitions Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 2/6] Platform/RPi4: Improve FADT ACPI table generation Pete Batard
2019-12-18 14:46 ` Ard Biesheuvel
2019-12-18 16:31 ` Pete Batard
2019-12-18 11:41 ` Pete Batard [this message]
2019-12-18 15:57 ` [edk2-platforms][PATCH 3/6] Platform/RPi4: Improve SPCR and DBG2 " Philippe Mathieu-Daudé
2019-12-18 16:36 ` Pete Batard
2019-12-18 17:00 ` Philippe Mathieu-Daudé
2019-12-18 17:10 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 4/6] Platform/RPi4: Add switch to select between PL011 and miniUART Pete Batard
2019-12-18 16:05 ` Philippe Mathieu-Daudé
2019-12-18 16:59 ` [edk2-devel] " Pete Batard
2019-12-18 17:05 ` Philippe Mathieu-Daudé
2019-12-18 11:41 ` [edk2-platforms][PATCH 5/6] Platform/RPi4: Add XHCI and MCFG ACPI tables Pete Batard
2019-12-18 14:55 ` Ard Biesheuvel
2019-12-18 16:31 ` Pete Batard
2019-12-18 11:41 ` [edk2-platforms][PATCH 6/6] Platform/RPi4: Add ACPI basic mode build option Pete Batard
2019-12-18 12:10 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191218114156.9036-4-pete@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox