From: "Dong, Eric" <eric.dong@intel.com>
To: devel@edk2.groups.io
Cc: Ray Ni <ray.ni@intel.com>, Laszlo Ersek <lersek@redhat.com>
Subject: [PATCH v2 2/2] UefiCpuPkg/PiSmmCpuDxeSmm: Fix buffer overflow issue.
Date: Mon, 23 Dec 2019 14:48:06 +0800 [thread overview]
Message-ID: <20191223064806.682-3-eric.dong@intel.com> (raw)
In-Reply-To: <20191223064806.682-1-eric.dong@intel.com>
The size for the array of mSmmMpSyncData->CpuData[] is 0 ~
mMaxNumberOfCpus -1. But current code may use
mSmmMpSyncData->CpuData[mMaxNumberOfCpus].
This patch fixed this issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
---
UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
index 5ad12db980..e5324f8f84 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
@@ -137,7 +137,7 @@ ReleaseAllAPs (
{
UINTN Index;
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (IsPresentAp (Index)) {
ReleaseSemaphore (mSmmMpSyncData->CpuData[Index].Run);
}
@@ -170,7 +170,7 @@ AllCpusInSmmWithExceptions (
CpuData = mSmmMpSyncData->CpuData;
ProcessorInfo = gSmmCpuPrivate->ProcessorInfo;
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (!(*(CpuData[Index].Present)) && ProcessorInfo[Index].ProcessorId != INVALID_APIC_ID) {
if (((Exceptions & ARRIVAL_EXCEPTION_DELAYED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmDelayed) != 0) {
continue;
@@ -305,7 +305,7 @@ SmmWaitForApArrival (
//
// Send SMI IPIs to bring outside processors in
//
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (!(*(mSmmMpSyncData->CpuData[Index].Present)) && gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId != INVALID_APIC_ID) {
SendSmiIpi ((UINT32)gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId);
}
@@ -361,7 +361,7 @@ WaitForAllAPsNotBusy (
{
UINTN Index;
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
//
// Ignore BSP and APs which not call in SMM.
//
@@ -619,7 +619,7 @@ BSPHandler (
//
while (TRUE) {
PresentCount = 0;
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (*(mSmmMpSyncData->CpuData[Index].Present)) {
PresentCount ++;
}
@@ -1303,7 +1303,7 @@ InternalSmmStartupAllAPs (
}
CpuCount = 0;
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (IsPresentAp (Index)) {
CpuCount ++;
@@ -1335,13 +1335,13 @@ InternalSmmStartupAllAPs (
// Here code always use AcquireSpinLock instead of AcquireSpinLockOrFail for not
// block mode.
//
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (IsPresentAp (Index)) {
AcquireSpinLock (mSmmMpSyncData->CpuData[Index].Busy);
}
}
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
if (IsPresentAp (Index)) {
mSmmMpSyncData->CpuData[Index].Procedure = (EFI_AP_PROCEDURE2) Procedure;
mSmmMpSyncData->CpuData[Index].Parameter = ProcedureArguments;
--
2.23.0.windows.1
next prev parent reply other threads:[~2019-12-23 6:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-23 6:48 [PATCH v2 0/2] Fix potential race condition issue Dong, Eric
2019-12-23 6:48 ` [PATCH v2 1/2] UefiCpuPkg/PiSmmCpuDxeSmm: Remove dependence between APs Dong, Eric
2019-12-23 7:38 ` [edk2-devel] " Ni, Ray
2019-12-23 7:48 ` Dong, Eric
2019-12-23 6:48 ` Dong, Eric [this message]
2019-12-23 7:39 ` [PATCH v2 2/2] UefiCpuPkg/PiSmmCpuDxeSmm: Fix buffer overflow issue Ni, Ray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191223064806.682-3-eric.dong@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox