From: "Javeed, Ashraf" <ashraf.javeed@intel.com>
To: devel@edk2.groups.io
Cc: Michael D Kinney <michael.d.kinney@intel.com>,
Liming Gao <liming.gao@intel.com>, Ray Ni <ray.ni@intel.com>
Subject: [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V7] MdePkg/Protocols: New PCI Express Platform Protocol, EFI encodings
Date: Tue, 31 Dec 2019 02:42:42 +0530 [thread overview]
Message-ID: <20191230211242.15000-1-ashraf.javeed@intel.com> (raw)
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1954
Three interfaces added to PCI Express Platform Protocol:-
(1) GetDevicePolicy() -> to retrieve device-specific platform policies
(2) NotifyDeviceState() -> to notify platform about device PCI Express
configuration state
(3) GetPolicy() -> to retrieve platform policy about the PCI Express
feature list
PCI Express Override Protocol is made alias to PCI Express Platform
Protocol.
EFI encodings introduced for the following PCI Express features, are:
1. Maximum Payload Size (MPS)
2. Maximum Read Request Size (MRRS)
3. Extended Tag
4. Relax Order Enable
5. No Snoop Enable
6. ASPM support
7. Common Clock Configuration
8. Extended SYNC
9. Atomic Op
10. LTR Enable
11. PTM support
12. CTO support
13. CPM
14. L1 PM Substates
New source files with unique definitions are:
MdePkg/Include/Protocol/PciExpressPlatform.h,
MdePkg/Include/Protocol/PciExpressOverride.h
Signed-off-by: Ashraf Javeed <ashraf.javeed@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
---
In V7: Revised ECR to define additional interface GetPolicy() in the PCI
Express Platform Protocol / PCI Express Override Protocol,
Renamed EFI_PCI_EXPRESS_PLATFORM_POLICY to EFI_PCI_EXPRESS_DEVICE_POLICY,
Removed the reserved fields from the EFI_PCI_EXPRESS_DEVICE_POLICY, added
input parameter to give the length of input buffer in GetDevicePolicy(),
and NotifyDeviceState(),
introduced new data type EFI_PCI_EXPRESS_PLATFORM_POLICY for the interface
GetPolicy().
In V6: renamed the protocol definition source files, remove PCD comments,
and renamed NotifyDeviceConfiguration -> NotifyDeviceState
In V5: Revised ECR to define new PCI Platform Protocol to support the
PCI Express capability features:-
EFI_PCI_EXPRESS_PLATFORM_PROTOCOL, EFI_PCI_EXPRESS_OVERRIDE_PROTOCOL.
Added new interface -> NotifyDeviceConfiguration
Added new EFI encodings / data types for PCIe features:-
CPM, L1 PM substates.
Enhance the definition of the PCIe feature AtomicOp to support additional
attribute - Egress blocking of the port.
In V4: Redefinition of the existing interfaces in the EFI_PCI_PLATFORM_-
PROTOCOL2, to avoid type casting and to avoid further future change
In V3: License update in the header sections of source files
In V2: Correction made to header sections of source files
---
MdePkg/Include/Protocol/PciExpressOverride.h | 37 +++++++++++++++++++++++++++++++++++++
MdePkg/Include/Protocol/PciExpressPlatform.h | 684 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MdePkg/Include/Protocol/PciOverride2.h | 37 -------------------------------------
MdePkg/Include/Protocol/PciPlatform2.h | 524 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MdePkg/MdePkg.dec | 8 ++++----
5 files changed, 725 insertions(+), 565 deletions(-)
diff --git a/MdePkg/Include/Protocol/PciExpressOverride.h b/MdePkg/Include/Protocol/PciExpressOverride.h
new file mode 100644
index 0000000..aab9375
--- /dev/null
+++ b/MdePkg/Include/Protocol/PciExpressOverride.h
@@ -0,0 +1,37 @@
+/** @file
+ This file declares EFI PCI Express Override protocol which provides the interface between
+ the PCI bus driver/PCI Host Bridge Resource Allocation driver and an implementation's
+ driver to describe the unique features of a platform.
+ This protocol is optional.
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+
+**/
+
+#ifndef _PCI_EXPRESS_OVERRIDE_H_
+#define _PCI_EXPRESS_OVERRIDE_H_
+
+///
+/// EFI_PCI_EXPRESS_OVERRIDE_PROTOCOL has the same structure as of EFI_PCI_EXPRESS_PLATFORM_PROTOCOL
+///
+#include "PciExpressPlatform.h"
+
+///
+/// Global ID for the EFI_PCI_EXPRESS_OVERRIDE_PROTOCOL
+///
+#define EFI_PCI_EXPRESS_OVERRIDE_GUID \
+ { \
+ 0xb9d5ea1, 0x66cb, 0x4546, {0xb0, 0xbb, 0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47} \
+ }
+
+///
+/// Declaration for EFI_PCI_EXPRESS_OVERRIDE_PROTOCOL
+///
+typedef EFI_PCI_EXPRESS_PLATFORM_PROTOCOL EFI_PCI_EXPRESS_OVERRIDE_PROTOCOL;
+
+
+extern EFI_GUID gEfiPciExpressOverrideProtocolGuid;
+
+#endif
diff --git a/MdePkg/Include/Protocol/PciExpressPlatform.h b/MdePkg/Include/Protocol/PciExpressPlatform.h
new file mode 100644
index 0000000..8a28418
--- /dev/null
+++ b/MdePkg/Include/Protocol/PciExpressPlatform.h
@@ -0,0 +1,684 @@
+/** @file
+ This file declares EFI PCI Express Platform Protocol that provide the interface between
+ the PCI bus driver/PCI Host Bridge Resource Allocation driver and a platform-specific
+ driver to describe the unique features of a platform.
+ This protocol is optional.
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+
+**/
+
+#ifndef _PCI_EXPRESS_PLATFORM_H_
+#define _PCI_EXPRESS_PLATFORM_H_
+
+///
+/// This file must be included because the EFI_PCI_EXPRESS_PLATFORM_PROTOCOL uses
+/// EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE.
+///
+#include <Protocol/PciHostBridgeResourceAllocation.h>
+
+///
+/// Global ID for the EFI_PCI_EXPRESS_PLATFORM_PROTOCOL.
+///
+#define EFI_PCI_EXPRESS_PLATFORM_PROTOCOL_GUID \
+ { \
+ 0x787b0367, 0xa945, 0x4d60, {0x8d, 0x34, 0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6} \
+ }
+
+///
+/// As per the present definition and specification of this protocol, the major
+/// version is 1, and minor version is 1. Any driver utilizing this protocol
+/// shall use these versions number to maintain the backward compatibility as
+/// per its specification changes in future.
+///
+enum EfiPciExpressPlatformProtocolVersion {
+ EFI_PCI_EXPRESS_PLATFORM_PROTOCOL_MAJOR_VERSION = 1,
+ EFI_PCI_EXPRESS_PLATFORM_PROTOCOL_MINOR_VERSION = 1
+};
+
+///
+/// Forward declaration for EFI_PCI_EXPRESS_PLATFORM_PROTOCOL.
+///
+typedef struct _EFI_PCI_EXPRESS_PLATFORM_PROTOCOL EFI_PCI_EXPRESS_PLATFORM_PROTOCOL;
+
+///
+/// Related Definitions for EFI_PCI_EXPRESS_DEVICE_POLICY
+///
+
+///
+/// EFI encoding used in notification to the platform, for any of the PCI Express
+/// capabilities feature state, to indicate that it is not a supported feature,
+/// or its present state is unknown
+///
+#define EFI_PCI_EXPRESS_NOT_APPLICABLE 0xFF
+
+///
+/// Following are the data types for EFI_PCI_EXPRESS_DEVICE_POLICY
+/// each for the PCI standard feature and its corresponding bitmask
+/// representing the valid combinations of PCI attributes
+///
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe device Maximum Payload Size (MPS). Refer to PCI Express
+/// Base Specification 4 (chapter 7.5.3.4), on how to translate the below EFI
+/// encodings as per the PCI hardware terminology. If this data member value is 0
+/// than there is no platform policy to override, this feature would be enabled as
+/// per its PCI specification based on the device capabilities. Below is it
+/// data type and the macro definitions which the driver uses for interpreting
+/// the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE;
+
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_128B 0x01 //set to default 128B
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_256B 0x02 //set to 256B if applicable
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_512B 0x03 //set to 512B if applicable
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_1024B 0x04 //set to 1024B if applicable
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_2048B 0x05 //set to 2048B if applicable
+#define EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE_4096B 0x06 //set to 4096B if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature Maximum Read Request Size (MRRS). Refer to PCI Express Base
+/// Specification 4 (chapter 7.5.3.4), on how to translate the below EFI
+/// encodings as per the PCI hardware terminology. If this data member value
+/// is returned as 0 than there is no platform policy to override, this feature
+/// would be enabled as per its PCI specification based on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE;
+
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_128B 0x01 //set to default 128B
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_256B 0x02 //set to 256B if applicable
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_512B 0x03 //set to 512B if applicable
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_1024B 0x04 //set to 1024B if applicable
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_2048B 0x05 //set to 2048B if applicable
+#define EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE_4096B 0x06 //set to 4096B if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature Extended Tags. Refer to PCI Express Base Specification
+/// 4 (chapter 7.5.3.4), on how to translate the below EFI encodings as per the
+/// PCI hardware terminology. If this data member value is returned as 0 than
+/// there is no platform policy to override, this feature would be enabled as
+/// per its PCI specification based on the device capabilities. Below is it
+/// data type and the macro definitions which the driver uses for interpreting
+/// the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_EXTENDED_TAG;
+
+#define EFI_PCI_EXPRESS_EXTENDED_TAG_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_EXTENDED_TAG_5BIT 0x01 //set to default 5-bit
+#define EFI_PCI_EXPRESS_EXTENDED_TAG_8BIT 0x02 //set to 8-bit if applicable
+#define EFI_PCI_EXPRESS_EXTENDED_TAG_10BIT 0x03 //set to 10-bit if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe link's Active State Power Mgmt (ASPM).
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.7), on how to
+/// translate the below EFI encodings as per the PCI hardware terminology.
+/// If this data member value is returned as 0 than there is no platform policy
+/// to override, this feature would be enabled as per its PCI specification based
+/// on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_ASPM_SUPPORT;
+
+#define EFI_PCI_EXPRESS_ASPM_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_ASPM_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_ASPM_L0s_SUPPORT 0x02 //set to L0s state
+#define EFI_PCI_EXPRESS_ASPM_L1_SUPPORT 0x03 //set to L1 state
+#define EFI_PCI_EXPRESS_ASPM_L0S_L1_SUPPORT 0x04 //set to L0s and L1 state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe Device's Relax Ordering enable/disable.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.4), on how to
+/// translate the below EFI encodings as per the PCI hardware terminology.
+/// If this data member value is returned as 0 than there is no platform policy
+/// to override, this feature would be enabled as per its PCI specification based
+/// on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_RELAX_ORDER;
+
+#define EFI_PCI_EXPRESS_RO_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_RO_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_RO_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe Device's No-Snoop enable/disable.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.4), on how to
+/// translate the below EFI encodings as per the PCI hardware terminology.
+/// If this data member value is returned as 0 than there is no platform policy
+/// to override, this feature would be enabled as per its PCI specification based
+/// on the device capabilities.
+/// Below is it data type and the macro definitions which the driver uses for
+/// interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_NO_SNOOP;
+
+#define EFI_PCI_EXPRESS_NS_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_NS_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_NS_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe link's Clock configuration is common or discrete.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.7), on how to translate
+/// the below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_COMMON_CLOCK_CFG;
+
+#define EFI_PCI_EXPRESS_CLK_CFG_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_CLK_CFG_ASYNCH 0x01 //set to default asynchronous clock
+#define EFI_PCI_EXPRESS_CLK_CFG_COMMON 0x02 //set to common clock
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe link's Extended Synch enable or disable.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.7), on how to translate
+/// the below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_EXTENDED_SYNCH;
+
+#define EFI_PCI_EXPRESS_EXT_SYNCH_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_EXT_SYNCH_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_EXT_SYNCH_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe Device's AtomicOp Requester enable or disable, as well
+/// as its Egress blocking based on the port's routing capability.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.16), on how to translate
+/// the given data structure as per the PCI hardware terminology.
+/// If the data member "Override" value is 0 than there is no platform policy to
+/// override, other data members value must be ignored. If 1 than other data
+/// members will be used as per the device capabilities. Below is its data type
+/// definitions which the driver uses for interpreting the platform policy.
+///
+typedef struct _EFI_PCI_EXPRESS_ATOMIC_OP EFI_PCI_EXPRESS_ATOMIC_OP;
+
+struct _EFI_PCI_EXPRESS_ATOMIC_OP {
+ //
+ // set to indicate the platform request to override based on below data member
+ // bit fields; clear bit indicates no platform request to override and the other
+ // data member bit fields are not applicable.
+ // Ignored when passed as input parameters.
+ //
+ UINT8 Override:1;
+ //
+ // set to enable the device as the requester for AtomicOp; clear bit to force
+ // default disable state
+ //
+ UINT8 Enable_AtomicOpRequester:1;
+ //
+ // set to enable the AtomicOp Egress blocking on this port based on its routing
+ // capability; clear bit to force default disable state
+ //
+ UINT8 Enable_AtomicOpEgressBlocking:1;
+ //
+ // the remaining bits are unused for this feature
+ //
+ UINT8 Reserved:5;
+};
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe Device's LTR Mechanism enable/disable.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.16), on how to translate
+/// the below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_LTR;
+
+#define EFI_PCI_EXPRESS_LTR_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_LTR_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_LTR_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe Device's Precision Time Measurement (PTM) enable/disable.
+/// Refer to PCI Express Base Specification 4 (chapter 7.5.3.16), on how to translate the
+/// below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_PTM;
+
+#define EFI_PCI_EXPRESS_PTM_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_PTM_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_PTM_ENABLE 0x02 //set to enable state only
+#define EFI_PCI_EXPRESS_PTM_ROOT_SEL 0x02 //set to root select & enable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe Device's Completion Timeout (CTO) set to supported ranges
+/// or disable. Refer to PCI Express Base Specification 4 (chapter 7.5.3.16), on how to
+/// translate the below EFI encodings as per the PCI hardware terminology. If this
+/// data member value is returned as 0 than there is no platform policy to override,
+/// this feature would be enabled as per its PCI specification based on the device
+/// capabilities. Below is its data type and the macro definitions which the
+/// driver uses for interpreting the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_CTO_SUPPORT;
+
+#define EFI_PCI_EXPRESS_CTO_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_CTO_DEFAULT 0x01 //set to default range of 5us to 50ms if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_A1 0x02 //set to range of 50us to 100us if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_A2 0x03 //set to range of 1ms to 10ms if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_B1 0x04 //set to range of 16ms to 55ms if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_B2 0x05 //set to range of 65ms to 210ms if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_C1 0x06 //set to range of 260ms to 900ms if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_C2 0x07 //set to range of 1s to 3.5s if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_D1 0x08 //set to range of 4s to 13s if applicable
+#define EFI_PCI_EXPRESS_CTO_RANGE_D2 0x09 //set to range of 17s to 64s if applicable
+#define EFI_PCI_EXPRESS_CTO_DET_DISABLE 0x10 //set to CTO detection disable if applicable
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe link's Clock Power Management (CPM) enable or disable.
+/// Refer to PCI Express Base Specification 5 (chapter 7.5.3.7), on how to translate
+/// the below EFI encodings as per the PCI hardware terminology. If this data member
+/// value is returned as 0 than there is no platform policy to override, this
+/// feature would be ignored or disabled/enabled, as per its relation with other
+/// components and its capabilities, as defined in its PCI specification. Below
+/// is its data type and the macro definitions which the driver uses for interpreting
+/// the platform policy.
+///
+typedef UINT8 EFI_PCI_EXPRESS_CPM;
+
+#define EFI_PCI_EXPRESS_CPM_AUTO 0x00 //No request for override
+#define EFI_PCI_EXPRESS_CPM_DISABLE 0x01 //set to default disable state
+#define EFI_PCI_EXPRESS_CPM_ENABLE 0x02 //set to enable state
+
+///
+/// This data type is to retrieve the PCI device platform policy for the PCI
+/// Express feature PCIe link's L1 PM Substates.
+/// Refer to PCI Express Base Specification 5 (chapter 7.8.3.3), on how to translate
+/// the given data structure as per the PCI hardware terminology. If the data member
+/// "Override" value is 0 than there is no platform policy to override, other data
+/// members will be ignored; if 1 than other data members are used for this feature,
+/// to align the states based on its capabilities as well as its relationship with
+/// other components in the PCI hierarchy. The platform is expected to return any
+/// combination from the four L1 PM Substates.
+/// Below is its data type definitions which the driver uses for interpreting
+/// the platform policy.
+///
+typedef struct _EFI_PCI_EXPRESS_L1PM_SUBSTATES EFI_PCI_EXPRESS_L1PM_SUBSTATES;
+
+struct _EFI_PCI_EXPRESS_L1PM_SUBSTATES {
+ //
+ // set to indicate the platform request to override the L1 PM Substates using
+ // the other data member bit fields; bit clear means no request from platform
+ // to override the L1 PM Substates for the device. Ignored when passed as input
+ // parameters.
+ //
+ UINT8 Override:1;
+ //
+ // set to enable the PCI-PM L1.2 state; bit clear to force default disable state
+ //
+ UINT8 Enable_Pci_Pm_L1_2:1;
+ //
+ // set to enable the PCI-PM L1.1 state; bit clear to force default disable state
+ //
+ UINT8 Enable_Pci_Pm_L1_1:1;
+ //
+ // set to enable the ASPM L1.2 state; bit clear to force default disable state
+ //
+ UINT8 Enable_Aspm_L1_2:1;
+ //
+ // set to enable the ASPM L1.1 state; bit clear to force default disable state
+ //
+ UINT8 Enable_Aspm_L1_1:1;
+ //
+ // rest of the remaining bits are reserved, not utilized; can be reused in
+ // future to define additional conditions as per PCIe capabilities
+ //
+ UINT8 Reserved:3;
+};
+
+///
+/// Reserves for future use
+///
+typedef UINT8 EFI_PCI_EXPRESS_RESERVES;
+
+///
+/// The EFI_PCI_EXPRESS_DEVICE_POLICY is altogether 128-byte size, with each
+/// byte field representing one PCI standerd feature defined in the PCI Express Base
+/// Specification 4.0, version 1.0.
+///
+typedef struct {
+ EFI_PCI_EXPRESS_MAX_PAYLOAD_SIZE DeviceCtlMPS;
+ EFI_PCI_EXPRESS_MAX_READ_REQ_SIZE DeviceCtlMRRS;
+ EFI_PCI_EXPRESS_EXTENDED_TAG DeviceCtlExtTag;
+ EFI_PCI_EXPRESS_RELAX_ORDER DeviceCtlRelaxOrder;
+ EFI_PCI_EXPRESS_NO_SNOOP DeviceCtlNoSnoop;
+ EFI_PCI_EXPRESS_ASPM_SUPPORT LinkCtlASPMState;
+ EFI_PCI_EXPRESS_COMMON_CLOCK_CFG LinkCtlCommonClkCfg;
+ EFI_PCI_EXPRESS_EXTENDED_SYNCH LinkCtlExtSynch;
+ EFI_PCI_EXPRESS_ATOMIC_OP DeviceCtl2AtomicOp;
+ EFI_PCI_EXPRESS_LTR DeviceCtl2LTR;
+ EFI_PCI_EXPRESS_PTM PTMControl;
+ EFI_PCI_EXPRESS_CTO_SUPPORT CTOsupport;
+ EFI_PCI_EXPRESS_CPM LinkCtlCPM;
+ EFI_PCI_EXPRESS_L1PM_SUBSTATES L1PMSubstates;
+ EFI_PCI_EXPRESS_RESERVES Reserves[114];
+} EFI_PCI_EXPRESS_DEVICE_POLICY;
+
+///
+/// The EFI_PCI_EXPRESS_DEVICE_CONFIGURATION is an alias of the data type of
+/// EFI_PCI_EXPRESS_DEVICE_POLICY, used in notifying the platform about the
+/// PCI Express features device configured states, through the NotifyDeviceState
+/// interface method.
+/// The EFI encoded macros like EFI_PCI_EXPRESS_*_AUTO, with the value 0 will not
+/// be used to report the PCI feature definite state; similarly for the data type
+/// of DeviceCtl2AtomicOp and L1PMSubstates, its data member "Override" will not
+/// be used. For any of the device's PCI features that are not supported, or its
+/// state is unknown, it will be returned as EFI_PCI_EXPRESS_NOT_APPLICABLE.
+///
+typedef EFI_PCI_EXPRESS_DEVICE_POLICY EFI_PCI_EXPRESS_DEVICE_CONFIGURATION;
+
+/**
+ Interface to retrieve the PCI device-specific platform policies to override
+ the PCI Express feature capabilities, of an PCI device.
+
+ The consumer driver(s), like PCI Bus driver and PCI Host Bridge Resource Allocation
+ Protocol drivers; can call this member function to retrieve the platform policies
+ specific to PCI device, related to its PCI Express capabilities. The producer of
+ this protocol is platform whom shall provide the device-specific pilicies to
+ override its PCIe features.
+
+ The GetDevicePolicy() member function is meant to return data about other PCI
+ Express features which would be supported by the PCI Bus driver in future;
+ like for example the MPS, MRRS, Extended Tag, ASPM, etc. The details about
+ this PCI features can be obtained from the PCI Express Base Specification (Rev.4
+ or 5). The EFI encodings for these features are defined in the EFI_PCI_EXPRESS
+ _PLATFORM_POLICY, see the Related Definition section for this. This member function
+ will use the associated EFI handle of the root bridge instance and the PCI address
+ of type EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS to determine the physical
+ PCI device within the chipset, to return its device-specific platform policies.
+ It is caller's responsibility to allocate the buffer and pass its pointer of
+ type EFI_PCI_EXPRESS_DEVICE_POLICY to this member function, to get its device
+ -specific policy data.
+ The caller is required to initialize the input buffer with either of two values:-
+ 1. EFI_PCI_EXPRESS_NOT_APPLICABLE: for those PCI Express features which are not
+ supported by the calling driver
+ 2. EFI_PCI_EXPRESS_*_AUTO: for those PCI Express features which are supported
+ by the calling driver
+ In order to skip any PCI Express feature for any particular PCI device, this
+ interface is expected to return its hardware default state as defined by the
+ PCI Express Base Specification.
+
+ @param[in] This Pointer to the EFI_PCI_EXPRESS_PLATFORM_PROTOCOL instance.
+ @param[in] RootBridge EFI handle of associated root bridge to the PCI device
+ @param[in] PciAddress The address of the PCI device on the PCI bus.
+ This address can be passed to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
+ member functions to access the PCI configuration space of the
+ device. See UEFI 2.1 Specification for the definition
+ of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
+ @param[in] Size The size, in bytes, of the input buffer, in next parameter.
+ @param[in,out] PciExPolicy The pointer to platform policy with respect to other
+ PCI features like, the MPS, MRRS, etc. Type
+ EFI_PCI_EXPRESS_DEVICE_POLICY is defined above.
+
+
+ @retval EFI_SUCCESS The function completed successfully, may returns
+ platform policy data for the given PCI component
+ @retval EFI_UNSUPPORTED PCI component belongs to PCI topology but not
+ part of chipset to provide the platform policy
+ @retval EFI_INVALID_PARAMETER If any of the input parameters are passed with
+ invalid data
+
+ **/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_PCI_EXPRESS_GET_DEVICE_POLICY) (
+ IN CONST EFI_PCI_EXPRESS_PLATFORM_PROTOCOL *This,
+ IN EFI_HANDLE RootBridge,
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
+ IN UINTN Size,
+ IN OUT EFI_PCI_EXPRESS_DEVICE_POLICY *PciExPolicy
+);
+
+/**
+ Notifies the platform about the PCI device current configuration state w.r.t.
+ its PCIe capabilites.
+
+ The PCI Bus driver or PCI Host Bridge Resource Allocation Protocol drivers
+ can call this member function to notfy the present PCIe configuration state
+ of the PCI device, to the platform. This is expected to be invoked after the
+ completion of the PCI enumeration phase.
+
+ The NotifyDeviceState() member function is meant to provide configured
+ data, to the platform about the PCIe features which would be supported by the
+ PCI Bus driver in future; like for example the MPS, MRRS, Extended Tag, ASPM,
+ etc. The details about this PCI features can be obtained from the PCI Express
+ Base Specification.
+
+ The EFI encodings and data types used to report out the present configuration
+ state, are same as those that were used by the platform to return the device-specific
+ platform policies, in the EFI_PCI_EXPRESS_DEVICE_POLICY (see the "Related
+ Definition" section for this). The difference is that it should return the actual
+ state in the EFI_PCI_EXPRESS_DEVICE_CONFIGURATION; without any macros corresponding
+ to EFI_PCI_EXPRESS_*_AUTO, and for the data types of DeviceCtl2AtomicOp and
+ L1PMSubstates, its corresponding data member "Override" bit field value shall be
+ ignored, will not be applicable. Note that, if the notifying driver does not
+ support any PCIe feature than it shall return its corresponding value as
+ EFI_PCI_EXPRESS_NOT_APPLICABLE.
+
+ This member function will use the associated EFI handle of the PCI IO Protocol
+ to address the physical PCI device within the chipset. It is caller's
+ responsibility to allocate the buffer and pass its pointer to this member
+ function.
+
+ @param[in] This Pointer to the EFI_PCI_EXPRESS_PLATFORM_PROTOCOL instance.
+ @param[in] PciDevice The associated PCI IO Protocol handle of the PCI
+ device. Type EFI_HANDLE is defined in
+ InstallProtocolInterface() in the UEFI 2.1
+ Specification
+ @param[in] Size The size, in bytes, of the input buffer in next parameter.
+ @param[in] PciExDeviceConfiguration The pointer to device configuration state with respect
+ to other PCI features like, the MPS, MRRS, etc. Type
+ EFI_PCI_EXPRESS_DEVICE_CONFIGURATION is an alias to
+ EFI_PCI_EXPRESS_DEVICE_POLICY, as defined above.
+
+
+ @retval EFI_SUCCESS This function completed successfully, the platform
+ was able to identify the PCI device successfully
+ @retval EFI_INVALID_PARAMETER Platform was not able to identify the PCI device;
+ or its PCI Express device configuration state
+ provided has invalid data.
+
+ **/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_PCI_EXPRESS_NOTIFY_DEVICE_STATE) (
+ IN CONST EFI_PCI_EXPRESS_PLATFORM_PROTOCOL *This,
+ IN EFI_HANDLE PciDevice,
+ IN UINTN Size,
+ IN EFI_PCI_EXPRESS_DEVICE_CONFIGURATION *PciExDeviceConfiguration
+ );
+
+///
+/// The EFI_PCI_EXPRESS_PLATFORM_POLICY is use to exchange feature policy, at a
+/// system level. Each boolean member represents each PCI Express feature defined
+/// in the PCI Express Base Specification. The value TRUE on exchange indicates
+/// support for this feature configuration, and FALSE indicates not supported,
+/// or no configuration required on return data. The order of members represent
+/// PCI Express features that are fixed for this protocol definition, and should
+/// be aligned with the definition of the EFI_PCI_EXPRESS_DEVICE_POLICY.
+///
+typedef struct {
+ //
+ // For PCI Express feature - Max. Payload Size
+ //
+ BOOLEAN Mps;
+ //
+ // For PCI Express feature - Max. Read Request Size
+ //
+ BOOLEAN Mrrs;
+ //
+ // For PCI Express feature - Extended Tag
+ //
+ BOOLEAN ExtTag;
+ //
+ // For PCI Express feature - Relax Order
+ //
+ BOOLEAN RelaxOrder;
+ //
+ // For PCI Express feature - No-Snoop
+ //
+ BOOLEAN NoSnoop;
+ //
+ // For PCI Express feature - ASPM state
+ //
+ BOOLEAN Aspm;
+ //
+ // For PCI Express feature - Common Clock Configuration
+ //
+ BOOLEAN Ccc;
+ //
+ // For PCI Express feature - Extended Sync
+ //
+ BOOLEAN ExtSync;
+ //
+ // For PCI Express feature - Atomic Op
+ //
+ BOOLEAN AtomicOp;
+ //
+ // For PCI Express feature - LTR
+ //
+ BOOLEAN Ltr;
+ //
+ // For PCI Express feature - PTM
+ //
+ BOOLEAN Ptm;
+ //
+ // For PCI Express feature - Completion Timeout
+ //
+ BOOLEAN Cto;
+ //
+ // For PCI Express feature - Clock Power Management
+ //
+ BOOLEAN Cpm;
+ //
+ // For PCI Express feature - L1 PM Substates
+ //
+ BOOLEAN L1PmSubstates;
+
+} EFI_PCI_EXPRESS_PLATFORM_POLICY;
+
+/**
+ Informs the platform about its PCI Express features support capability and it
+ accepts request from platform to initialize only those features.
+
+ The caller shall first invoke this interface to inform platform about the list
+ of PCI Express feature supported, in the buffer of type EFI_PCI_EXPRESS_PLATFORM_POLICY.
+ On return, it expects the list of supported PCI Express features that are required
+ to be configured; in the same form with the value of TRUE. The caller shall
+ ignore the feature request if its value is TRUE if that feature was initialized
+ as FALSE when it was passed as the input parameter.
+
+ The caller shall treat this list of PCI Express features as the global platform
+ requirement; and corresponding to that feature list it expects device-specific
+ policy through the interface GetDevicePolicy() to configure individual PCI devices.
+ For example, say that the caller indicates first 8 PCI Express features in the
+ list of EFI_PCI_EXPRESS_PLATFORM_POLICY, and platform wants only 5 PCI Express
+ features from that list to be configured by the caller. Thus, based on feature
+ list recorded here, the device-specific policy returned in the GetDevicePolicy()
+ for every PCI device in the system; and the caller shall configure only 5 PCI
+ Express features accordingly.
+
+ The protocol producing driver shall use the size input parameter to determine
+ the length of the buffer of type EFI_PCI_EXPRESS_PLATFORM_POLICY, and to also
+ determine version of the caller. If the size of the input buffer is more than
+ what its supporting version (indicated through the MajorVersion and MinorVersion
+ data members of the protocol) than it shall return EFI_INVALID_PARAMETER.
+
+ The error code in returned status essential means that the caller cannot initialize
+ any PCI Express features. Thus, this interface would be primary interface for the
+ caller to initialize the PCI Express features for the platform, apart from
+ obtaining the handle of this protocol.
+
+ @param[in] This Pointer to the EFI_PCI_EXPRESS_PLATFORM_PROTOCOL
+ instance.
+ @param[in] Size type UINTN to indicate the size of the input
+ buffer
+ @param[in,out] PlatformPolicy Pointer to the EFI_PCI_EXPRESS_PLATFORM_POLICY.
+ On input, the caller indicates the list of supported
+ PCI Express features. On output, the platform
+ indicates the required features out of the list
+ that needs to be initialized by the caller.
+
+ @retval EFI_SUCCESS The function completed successfully, returns
+ platform policy for the PCI Express features
+ @retval EFI_INVALID_PARAMETER If any of the input parameters are passed with
+ invalid data; like the pointer to the protocol
+ is not valid, the size of the input buffer is
+ greater than the version supported, the pointer
+ to buffer is NULL.
+
+ **/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_PCI_EXPRESS_GET_POLICY) {
+ IN CONST EFI_PCI_EXPRESS_PLATFORM_PROTOCOL *This,
+ IN UINTN Size,
+ IN OUT EFI_PCI_EXPRESS_PLATFORM_POLICY *PlatformPolicy
+};
+
+///
+/// This protocol provides the interface between the PCI bus driver/PCI Host
+/// Bridge Resource Allocation driver and a platform-specific driver to describe
+/// the unique PCI Express features of a platform.
+///
+struct _EFI_PCI_EXPRESS_PLATFORM_PROTOCOL {
+ ///
+ /// The major version of this PCIe Platform Protocol
+ ///
+ UINT8 MajorVersion;
+ ///
+ /// The minor version of this PCIe Platform Protocol
+ ///
+ UINT8 MinorVersion;
+ ///
+ /// Retrieves the PCIe device-specific platform policy regarding enumeration.
+ ///
+ EFI_PCI_EXPRESS_GET_DEVICE_POLICY GetDevicePolicy;
+ ///
+ /// Informs the platform about the PCIe capabilities programmed, based on the
+ /// present state of the PCI device
+ ///
+ EFI_PCI_EXPRESS_NOTIFY_DEVICE_STATE NotifyDeviceState;
+ ///
+ /// Retrieve the platform policy to select the PCI Express features
+ ///
+ EFI_PCI_EXPRESS_GET_POLICY GetPolicy;
+
+};
+
+extern EFI_GUID gEfiPciExpressPlatformProtocolGuid;
+
+#endif
diff --git a/MdePkg/Include/Protocol/PciOverride2.h b/MdePkg/Include/Protocol/PciOverride2.h
deleted file mode 100644
index 7e878a4..0000000
--- a/MdePkg/Include/Protocol/PciOverride2.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/** @file
- This file declares EFI PCI Override protocol which provides the interface between
- the PCI bus driver/PCI Host Bridge Resource Allocation driver and an implementation's
- driver to describe the unique features of a platform.
- This protocol is optional.
-
-Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-
-**/
-
-#ifndef _PCI_OVERRIDE2_H_
-#define _PCI_OVERRIDE2_H_
-
-///
-/// EFI_PCI_OVERRIDE_PROTOCOL has the same structure with EFI_PCI_PLATFORM_PROTOCOL
-///
-#include <Protocol/PciPlatform2.h>
-
-///
-/// Global ID for the EFI_PCI_OVERRIDE_PROTOCOL
-///
-#define EFI_PCI_OVERRIDE2_GUID \
- { \
- 0xb9d5ea1, 0x66cb, 0x4546, {0xb0, 0xbb, 0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47} \
- }
-
-///
-/// Declaration for EFI_PCI_OVERRIDE_PROTOCOL
-///
-typedef EFI_PCI_PLATFORM_PROTOCOL2 EFI_PCI_OVERRIDE_PROTOCOL2;
-
-
-extern EFI_GUID gEfiPciOverrideProtocol2Guid;
-
-#endif
diff --git a/MdePkg/Include/Protocol/PciPlatform2.h b/MdePkg/Include/Protocol/PciPlatform2.h
deleted file mode 100644
index 6dcae70..0000000
--- a/MdePkg/Include/Protocol/PciPlatform2.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/** @file
- This file declares PCI Platform Protocol that provide the interface between
- the PCI bus driver/PCI Host Bridge Resource Allocation driver and a platform-specific
- driver to describe the unique features of a platform.
- This protocol is optional.
-
-Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-
-**/
-
-#ifndef _PCI_PLATFORM2_H_
-#define _PCI_PLATFORM2_H_
-
-///
-/// This file must be included because the EFI_PCI_PLATFORM_PROTOCOL2 uses
-/// EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE.
-///
-#include <Protocol/PciHostBridgeResourceAllocation.h>
-
-///
-/// This file is included to reuse the existing PCI Platform data structure
-/// definitions of EFI_PCI_EXECUTION_PHASE,EFI_PCI_PLATFORM_POLICY
-///
-#include <Protocol/PciPlatform.h>
-
-///
-/// Global ID for the EFI_PCI_PLATFORM_PROTOCOL2.
-///
-#define EFI_PCI_PLATFORM_PROTOCOL2_GUID \
- { \
- 0x787b0367, 0xa945, 0x4d60, {0x8d, 0x34, 0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6} \
- }
-
-///
-/// As per the present definition and specification of this protocol, the major
-/// version is 1, and minor version is 1. Any driver utilizing this protocol
-/// shall use these versions number to maintain the backward compatibility as
-/// per its specification changes in future.
-///
-enum EfiPciPlatformProtocolVersion {
- EFI_PCI_PLATFORM_PROTOCOL_MAJOR_VERSION = 1,
- EFI_PCI_PLATFORM_PROTOCOL_MINOR_VERSION = 1
-};
-
-///
-/// Forward declaration for EFI_PCI_PLATFORM_PROTOCOL2.
-///
-typedef struct _EFI_PCI_PLATFORM_PROTOCOL2 EFI_PCI_PLATFORM_PROTOCOL2;
-
-///
-/// Related Definitions
-///
-
-///
-/// Following are the data types for EFI_PCI_PLATYFORM_EXTENDED_POLICY
-/// each for the PCI standard feature and its corresponding bitmask
-/// representing the valid combinations of PCI attributes
-///
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature Maximum Payload Size (MPS). Refer to PCI Base Specification
-/// 4, (chapter 7.5.3.4) on how to translate the below EFI encodings as per the
-/// PCI hardware terminology. If this data member value is returned as 0 than
-/// there is no platform policy to override, this feature would be enabled as
-/// per its PCI specification based on the device capabilities. Below is it
-/// data type and the macro definitions which the driver uses for interpreting
-/// the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_MAX_PAYLOAD_SIZE;
-
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_128B 0x01 //set to default 128B
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_256B 0x02 //set to 256B if applicable
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_512B 0x03 //set to 512B if applicable
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_1024B 0x04 //set to 1024B if applicable
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_2048B 0x05 //set to 2048B if applicable
-#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_4096B 0x06 //set to 4096B if applicable
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature Maximum Read Request Size (MRRS). Refer to PCI Base
-/// Specification 4, (chapter 7.5.3.4) on how to translate the below EFI
-/// encodings as per the PCI hardware terminology. If this data member value
-/// is returned as 0 than there is no platform policy to override, this feature
-/// would be enabled as per its PCI specification based on the device capabilities.
-/// Below is it data type and the macro definitions which the driver uses for
-/// interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_MAX_READ_REQ_SIZE;
-
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_128B 0x01 //set to default 128B
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_256B 0x02 //set to 256B if applicable
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_512B 0x03 //set to 512B if applicable
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_1024B 0x04 //set to 1024B if applicable
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_2048B 0x05 //set to 2048B if applicable
-#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_4096B 0x06 //set to 4096B if applicable
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature Extended Tags. Refer to PCI Base Specification
-/// 4, (chapter 7.5.3.4) on how to translate the below EFI encodings as per the
-/// PCI hardware terminology. If this data member value is returned as 0 than
-/// there is no platform policy to override, this feature would be enabled as
-/// per its PCI specification based on the device capabilities. Below is it
-/// data type and the macro definitions which the driver uses for interpreting
-/// the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_EXTENDED_TAG;
-
-#define EFI_PCI_CONF_EXTENDED_TAG_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_EXTENDED_TAG_5BIT 0x01 //set to default 5-bit
-#define EFI_PCI_CONF_EXTENDED_TAG_8BIT 0x02 //set to 8-bit if applicable
-#define EFI_PCI_CONF_EXTENDED_TAG_10BIT 0x03 //set to 10-bit if applicable
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe link's Active State Power Mgmt (ASPM). Refer to PCI Base
-/// Specification 4, (chapter 7.5.3.7) on how to translate the below EFI
-/// encodings as per the PCI hardware terminology. If this data member value
-/// is returned as 0 than there is no platform policy to override, this feature
-/// would be enabled as per its PCI specification based on the device capabilities.
-/// Below is it data type and the macro definitions which the driver uses for
-/// interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_ASPM_SUPPORT;
-
-#define EFI_PCI_CONF_ASPM_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_ASPM_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_ASPM_L0s_SUPPORT 0x02 //set to L0s state
-#define EFI_PCI_CONF_ASPM_L1_SUPPORT 0x03 //set to L1 state
-#define EFI_PCI_CONF_ASPM_L0S_L1_SUPPORT 0x04 //set to L0s and L1 state
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe Device's Relax Ordering enable/disable. Refer to PCI Base
-/// Specification 4, (chapter 7.5.3.4) on how to translate the below EFI
-/// encodings as per the PCI hardware terminology. If this data member value
-/// is returned as 0 than there is no platform policy to override, this feature
-/// would be enabled as per its PCI specification based on the device capabilities.
-/// Below is it data type and the macro definitions which the driver uses for
-/// interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_RELAX_ORDER;
-
-#define EFI_PCI_CONF_RO_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_RO_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_RO_ENABLE 0x02 //set to enable state
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe Device's No-Snoop enable/disable. Refer to PCI Base
-/// Specification 4, (chapter 7.5.3.4) on how to translate the below EFI
-/// encodings as per the PCI hardware terminology. If this data member value
-/// is returned as 0 than there is no platform policy to override, this feature
-/// would be enabled as per its PCI specification based on the device capabilities.
-/// Below is it data type and the macro definitions which the driver uses for
-/// interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_NO_SNOOP;
-
-#define EFI_PCI_CONF_NS_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_NS_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_NS_ENABLE 0x02 //set to enable state
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe link's Clock configuration is common or discrete.
-/// Refer to PCI Base Specification 4, (chapter 7.5.3.7) on how to translate the
-/// below EFI encodings as per the PCI hardware terminology. If this data member
-/// value is returned as 0 than there is no platform policy to override, this
-/// feature would be enabled as per its PCI specification based on the device
-/// capabilities. Below is its data type and the macro definitions which the
-/// driver uses for interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_COMMON_CLOCK_CFG;
-
-#define EFI_PCI_CONF_CLK_CFG_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_CLK_CFG_ASYNCH 0x01 //set to default asynchronous clock
-#define EFI_PCI_CONF_CLK_CFG_COMMON 0x02 //set to common clock
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe link's Extended Synch enable or disable.
-/// Refer to PCI Base Specification 4, (chapter 7.5.3.7) on how to translate the
-/// below EFI encodings as per the PCI hardware terminology. If this data member
-/// value is returned as 0 than there is no platform policy to override, this
-/// feature would be enabled as per its PCI specification based on the device
-/// capabilities. Below is its data type and the macro definitions which the
-/// driver uses for interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_EXTENDED_SYNCH;
-
-#define EFI_PCI_CONF_EXT_SYNCH_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_EXT_SYNCH_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_EXT_SYNCH_ENABLE 0x02 //set to enable state
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe Device's AtomicOp Requester enable or disable.
-/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to translate the
-/// below EFI encodings as per the PCI hardware terminology. If this data member
-/// value is returned as 0 than there is no platform policy to override, this
-/// feature would be enabled as per its PCI specification based on the device
-/// capabilities. Below is its data type and the macro definitions which the
-/// driver uses for interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_ATOMIC_OP;
-
-#define EFI_PCI_CONF_ATOMIC_OP_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_ATOMIC_OP_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_ATOMIC_OP_ENABLE 0x02 //set to enable state
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe Device's LTR Mechanism enable/disable.
-/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to translate the
-/// below EFI encodings as per the PCI hardware terminology. If this data member
-/// value is returned as 0 than there is no platform policy to override, this
-/// feature would be enabled as per its PCI specification based on the device
-/// capabilities. Below is its data type and the macro definitions which the
-/// driver uses for interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_LTR;
-
-#define EFI_PCI_CONF_LTR_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_LTR_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_LTR_ENABLE 0x02 //set to enable state
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe Device's Precision Time Measurement (PTM) enable/disable.
-/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to translate the
-/// below EFI encodings as per the PCI hardware terminology. If this data member
-/// value is returned as 0 than there is no platform policy to override, this
-/// feature would be enabled as per its PCI specification based on the device
-/// capabilities. Below is its data type and the macro definitions which the
-/// driver uses for interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_PTM;
-
-#define EFI_PCI_CONF_PTM_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_PTM_DISABLE 0x01 //set to default disable state
-#define EFI_PCI_CONF_PTM_ENABLE 0x02 //set to enable state only
-#define EFI_PCI_CONF_PTM_ROOT_SEL 0x02 //set to root select & enable
-
-///
-/// This data type is to retrieve the PCI device platform policy for the PCI-
-/// compliant feature PCIe Device's Completion Timeout (CTO) set to supported ranges
-/// or disable. Refer to PCI Base Specification 4, (chapter 7.5.3.16) on how to
-/// translate the below EFI encodings as per the PCI hardware terminology. If this
-/// data member value is returned as 0 than there is no platform policy to override,
-/// this feature would be enabled as per its PCI specification based on the device
-/// capabilities. Below is its data type and the macro definitions which the
-/// driver uses for interpreting the platform policy.
-///
-typedef UINT8 EFI_PCI_CONF_CTO_SUPPORT;
-
-#define EFI_PCI_CONF_CTO_AUTO 0x00 //No request for override
-#define EFI_PCI_CONF_CTO_DEFAULT 0x01 //set to default range of 5us to 50ms if applicable
-#define EFI_PCI_CONF_CTO_RANGE_A1 0x02 //set to range of 50us to 100us if applicable
-#define EFI_PCI_CONF_CTO_RANGE_A2 0x03 //set to range of 1ms to 10ms if applicable
-#define EFI_PCI_CONF_CTO_RANGE_B1 0x04 //set to range of 16ms to 55ms if applicable
-#define EFI_PCI_CONF_CTO_RANGE_B2 0x05 //set to range of 65ms to 210ms if applicable
-#define EFI_PCI_CONF_CTO_RANGE_C1 0x06 //set to range of 260ms to 900ms if applicable
-#define EFI_PCI_CONF_CTO_RANGE_C2 0x07 //set to range of 1s to 3.5s if applicable
-#define EFI_PCI_CONF_CTO_RANGE_D1 0x08 //set to range of 4s to 13s if applicable
-#define EFI_PCI_CONF_CTO_RANGE_D2 0x09 //set to range of 17s to 64s if applicable
-#define EFI_PCI_CONF_CTO_DET_DISABLE 0x10 //set to CTO detection disable if applicable
-
-///
-/// Reserves for future use
-///
-typedef UINT8 EFI_PCI_CONF_RESERVES;
-
-///
-/// The EFI_PCI_PLATYFORM_EXTENDED_POLICY is altogether 128-byte size, with each
-/// byte field representing one PCI standerd feature defined in the PCI Express Base
-/// Specification 4.0, version 1.0.
-///
-typedef struct {
- EFI_PCI_CONF_MAX_PAYLOAD_SIZE DeviceCtlMPS;
- EFI_PCI_CONF_MAX_READ_REQ_SIZE DeviceCtlMRRS;
- EFI_PCI_CONF_EXTENDED_TAG DeviceCtlExtTag;
- EFI_PCI_CONF_RELAX_ORDER DeviceCtlRelaxOrder;
- EFI_PCI_CONF_NO_SNOOP DeviceCtlNoSnoop;
- EFI_PCI_CONF_ASPM_SUPPORT LinkCtlASPMState;
- EFI_PCI_CONF_COMMON_CLOCK_CFG LinkCtlCommonClkCfg;
- EFI_PCI_CONF_EXTENDED_SYNCH LinkCtlExtSynch;
- EFI_PCI_CONF_ATOMIC_OP DeviceCtl2AtomicOp;
- EFI_PCI_CONF_LTR DeviceCtl2LTR;
- EFI_PCI_CONF_PTM PTMControl;
- EFI_PCI_CONF_CTO_SUPPORT CTOsupport;
- EFI_PCI_CONF_RESERVES Reserves[116];
-} EFI_PCI_PLATFORM_EXTENDED_POLICY;
-
-/**
- The notification from the PCI bus enumerator to the platform that it is
- about to enter a certain phase during the enumeration process.
-
- The PlatformNotify() function can be used to notify the platform driver so that
- it can perform platform-specific actions. No specific actions are required.
- Eight notification points are defined at this time. More synchronization points
- may be added as required in the future. The PCI bus driver calls the platform driver
- twice for every Phase-once before the PCI Host Bridge Resource Allocation Protocol
- driver is notified, and once after the PCI Host Bridge Resource Allocation Protocol
- driver has been notified.
- This member function may not perform any error checking on the input parameters. It
- also does not return any error codes. If this member function detects any error condition,
- it needs to handle those errors on its own because there is no way to surface any
- errors to the caller.
-
- @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
- @param[in] HostBridge The handle of the host bridge controller.
- @param[in] Phase The phase of the PCI bus enumeration.
- @param[in] ExecPhase Defines the execution phase of the PCI chipset driver.
-
- @retval EFI_SUCCESS The function completed successfully.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PCI_PLATFORM_PHASE_NOTIFY2)(
- IN EFI_PCI_PLATFORM_PROTOCOL2 *This,
- IN EFI_HANDLE HostBridge,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase,
- IN EFI_PCI_EXECUTION_PHASE ExecPhase
- );
-
-/**
- The notification from the PCI bus enumerator to the platform for each PCI
- controller at several predefined points during PCI controller initialization.
-
- The PlatformPrepController() function can be used to notify the platform driver so that
- it can perform platform-specific actions. No specific actions are required.
- Several notification points are defined at this time. More synchronization points may be
- added as required in the future. The PCI bus driver calls the platform driver twice for
- every PCI controller-once before the PCI Host Bridge Resource Allocation Protocol driver
- is notified, and once after the PCI Host Bridge Resource Allocation Protocol driver has
- been notified.
- This member function may not perform any error checking on the input parameters. It also
- does not return any error codes. If this member function detects any error condition, it
- needs to handle those errors on its own because there is no way to surface any errors to
- the caller.
-
- @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
- @param[in] HostBridge The associated PCI host bridge handle.
- @param[in] RootBridge The associated PCI root bridge handle.
- @param[in] PciAddress The address of the PCI device on the PCI bus.
- @param[in] Phase The phase of the PCI controller enumeration.
- @param[in] ExecPhase Defines the execution phase of the PCI chipset driver.
-
- @retval EFI_SUCCESS The function completed successfully.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PCI_PLATFORM_PREPROCESS_CONTROLLER2)(
- IN EFI_PCI_PLATFORM_PROTOCOL2 *This,
- IN EFI_HANDLE HostBridge,
- IN EFI_HANDLE RootBridge,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase,
- IN EFI_PCI_EXECUTION_PHASE ExecPhase
- );
-
-/**
- Retrieves the platform policy regarding enumeration.
-
- The GetPlatformPolicy() function retrieves the platform policy regarding PCI
- enumeration. The PCI bus driver and the PCI Host Bridge Resource Allocation Protocol
- driver can call this member function to retrieve the policy.
-
- @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
- @param[out] PciPolicy The platform policy with respect to VGA and ISA aliasing.
-
- @retval EFI_SUCCESS The function completed successfully.
- @retval EFI_INVALID_PARAMETER PciPolicy is NULL.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PCI_PLATFORM_GET_PLATFORM_POLICY2)(
- IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
- OUT EFI_PCI_PLATFORM_POLICY *PciPolicy
- );
-
-/**
- Gets the PCI device's option ROM from a platform-specific location.
-
- The GetPciRom() function gets the PCI device's option ROM from a platform-specific location.
- The option ROM will be loaded into memory. This member function is used to return an image
- that is packaged as a PCI 2.2 option ROM. The image may contain both legacy and EFI option
- ROMs. See the UEFI 2.0 Specification for details. This member function can be used to return
- option ROM images for embedded controllers. Option ROMs for embedded controllers are typically
- stored in platform-specific storage, and this member function can retrieve it from that storage
- and return it to the PCI bus driver. The PCI bus driver will call this member function before
- scanning the ROM that is attached to any controller, which allows a platform to specify a ROM
- image that is different from the ROM image on a PCI card.
-
- @param[in] This The pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
- @param[in] PciHandle The handle of the PCI device.
- @param[out] RomImage If the call succeeds, the pointer to the pointer to the option ROM image.
- Otherwise, this field is undefined. The memory for RomImage is allocated
- by EFI_PCI_PLATFORM_PROTOCOL2.GetPciRom() using the EFI Boot Service AllocatePool().
- It is the caller's responsibility to free the memory using the EFI Boot Service
- FreePool(), when the caller is done with the option ROM.
- @param[out] RomSize If the call succeeds, a pointer to the size of the option ROM size. Otherwise,
- this field is undefined.
-
- @retval EFI_SUCCESS The option ROM was available for this device and loaded into memory.
- @retval EFI_NOT_FOUND No option ROM was available for this device.
- @retval EFI_OUT_OF_RESOURCES No memory was available to load the option ROM.
- @retval EFI_DEVICE_ERROR An error occurred in obtaining the option ROM.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_PCI_PLATFORM_GET_PCI_ROM2)(
- IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
- IN EFI_HANDLE PciHandle,
- OUT VOID **RomImage,
- OUT UINTN *RomSize
- );
-
-/**
- Retrieves the PCI device-specific platform policy regarding enumeration.
-
- The PCI Bus driver and PCI Host Bridge Resource Allocation Protocol drivers
- can call this member function to retrieve the platform policies specific to
- PCI device, regarding the PCI enumeration.
-
- The GetDevicePolicy() function retrieves the platform policy for a particular
- component regarding PCI enumeration. The PCI bus driver and the PCI Host Bridge
- Resource Allocation Protocol driver can call this member function to retrieve
- the policy.
- The existing GetPlatformPolicy() member function is used by the PCI Bus driver
- to program the legacy ranges, the data that is returned by that member function
- determines the supported attributes that are returned by the
- EFI_PCI_IO_PROTOCOL.Attributes() function.
- The GetDevicePolicy() member function is meant to return data about other PCI
- compliant features which would be supported by the PCI Bus driver in future;
- like for example the MPS, MRRS, Extended Tag, ASPM, etc. The details about
- this PCI features can be obtained from the PCI Base Specification 4.x. The
- EFI encodings for these feature are defined in the
- EFI_PCI_PLATFORM_EXTENDED_POLICY, see the Related Definition section for this.
- This member function will use the associated EFI handle of the PCI IO Protocol
- to determine the physical PCI device within the chipset, to return its
- device-specific platform policies. It is caller's responsibility to allocate
- the buffer and pass its pointer to this member function, to get its device-
- specific policy data.
-
- @param[in] This Pointer to the EFI_PCI_PLATFORM_PROTOCOL2 instance.
- @param[in] PciDevice The associated PCI IO Protocol handle of the PCI
- device. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.1
- Specification
- @param[in] PciExtPolicy The pointer to platform policy with respect to other
- PCI features like, the MPS, MRRS, etc. Type
- EFI_PCI_PLATFORM_EXTENDED_POLICY is defined in
- "Related Definitions" above.
-
-
- @retval EFI_SUCCESS The function completed successfully, may returns
- platform policy data for the given PCI component
- @retval EFI_UNSUPPORTED PCI component belongs to PCI topology but not
- part of chipset to provide the platform policy
- @retval EFI_INVALID_PARAMETER If any of the input parameters are passed with
- invalid data
-
- **/
-typedef
-EFI_STATUS
-(EFIAPI * EFI_PCI_PLATFORM_GET_DEVICE_POLICY) (
- IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
- IN EFI_HANDLE PciDevice,
- OUT EFI_PCI_PLATFORM_EXTENDED_POLICY *PciExtPolicy
-);
-
-///
-/// This protocol provides the interface between the PCI bus driver/PCI Host
-/// Bridge Resource Allocation driver and a platform-specific driver to describe
-/// the unique features of a platform.
-///
-struct _EFI_PCI_PLATFORM_PROTOCOL2 {
- ///
- /// The notification from the PCI bus enumerator to the platform that it is about to
- /// enter a certain phase during the enumeration process.
- ///
- EFI_PCI_PLATFORM_PHASE_NOTIFY2 PlatformNotify;
- ///
- /// The notification from the PCI bus enumerator to the platform for each PCI
- /// controller at several predefined points during PCI controller initialization.
- ///
- EFI_PCI_PLATFORM_PREPROCESS_CONTROLLER2 PlatformPrepController;
- ///
- /// Retrieves the platform policy regarding enumeration.
- ///
- EFI_PCI_PLATFORM_GET_PLATFORM_POLICY2 GetPlatformPolicy;
- ///
- /// Gets the PCI device's option ROM from a platform-specific location.
- ///
- EFI_PCI_PLATFORM_GET_PCI_ROM2 GetPciRom;
- ///
- /// Retrieves the PCI device-specific platform policy regarding enumeration.
- ///
- EFI_PCI_PLATFORM_GET_DEVICE_POLICY GetDevicePolicy;
- ///
- /// The major version of this PCI Platform Protocol
- ///
- UINT8 MajorVersion;
- ///
- /// The minor version of this PCI Platform Protocol
- ///
- UINT8 MinorVersion;
-
-};
-
-extern EFI_GUID gEfiPciPlatformProtocol2Guid;
-
-#endif
diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec
index 2167d99..c1fdbaf 100644
--- a/MdePkg/MdePkg.dec
+++ b/MdePkg/MdePkg.dec
@@ -1016,11 +1016,11 @@
## Include/Protocol/PciOverride.h
gEfiPciOverrideProtocolGuid = { 0xb5b35764, 0x460c, 0x4a06, {0x99, 0xfc, 0x77, 0xa1, 0x7c, 0x1b, 0x5c, 0xeb }}
- ## Include/Protocol/PciPlatform2.h
- gEfiPciPlatformProtocol2Guid = { 0x787b0367, 0xa945, 0x4d60, { 0x8d, 0x34, 0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6 }}
+ ## Include/Protocol/PciExpressPlatform.h
+ gEfiPciExpressPlatformProtocolGuid = { 0x787b0367, 0xa945, 0x4d60, { 0x8d, 0x34, 0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6 }}
- ## Include/Protocol/PciOverride2.h
- gEfiPciOverrideProtocol2Guid = { 0xb9d5ea1, 0x66cb, 0x4546, { 0xb0, 0xbb, 0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47 }}
+ ## Include/Protocol/PciExpressOverride.h
+ gEfiPciExpressOverrideProtocolGuid = { 0xb9d5ea1, 0x66cb, 0x4546, { 0xb0, 0xbb, 0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47 }}
## Include/Protocol/PciEnumerationComplete.h
gEfiPciEnumerationCompleteProtocolGuid = { 0x30cfe3e7, 0x3de1, 0x4586, {0xbe, 0x20, 0xde, 0xab, 0xa1, 0xb3, 0xb7, 0x93}}
--
2.21.0.windows.1
next reply other threads:[~2019-12-30 21:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-30 21:12 Javeed, Ashraf [this message]
2020-01-02 6:16 ` [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V7] MdePkg/Protocols: New PCI Express Platform Protocol, EFI encodings Ni, Ray
2020-01-05 7:25 ` Javeed, Ashraf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191230211242.15000-1-ashraf.javeed@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox