[PATCH v5 3/6] UefiCpuPkg: Add definitions for EDKII microcode patch HOB

["Wu, Hao A" <hao.a.wu@intel.com>]

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430

This commit will add the definitions for EDKII microcode patch HOB.

The intention of adding this HOB is to provide a scheme to store the below
information:

A. The base address and size of the microcode patches that are being
   loaded (from flash) into memory;
B. The information of detected microcode patch for each processor within
   the system.

The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
detect and apply of the microcode happen). The consumer of the HOB can be
modules that want to detect/apply the microcode patch by themselves again
later during the boot flow.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
---
 UefiCpuPkg/UefiCpuPkg.dec                   |  3 ++
 UefiCpuPkg/Include/Guid/MicrocodePatchHob.h | 44 ++++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 797f948631..45b267ac61 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -63,6 +63,9 @@ [Guids]
   ## Include/Guid/CpuFeaturesInitDone.h
   gEdkiiCpuFeaturesInitDoneGuid  = { 0xc77c3a41, 0x61ab, 0x4143, { 0x98, 0x3e, 0x33, 0x39, 0x28, 0x6, 0x28, 0xe5 }}
 
+  ## Include/Guid/MicrocodePatchHob.h
+  gEdkiiMicrocodePatchHobGuid    = { 0xd178f11d, 0x8716, 0x418e, { 0xa1, 0x31, 0x96, 0x7d, 0x2a, 0xc4, 0x28, 0x43 }}
+
 [Protocols]
   ## Include/Protocol/SmmCpuService.h
   gEfiSmmCpuServiceProtocolGuid  = { 0x1d202cab, 0xc8ab, 0x4d5c, { 0x94, 0xf7, 0x3c, 0xfc, 0xc0, 0xd3, 0xd3, 0x35 }}
diff --git a/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h b/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
new file mode 100644
index 0000000000..2d307fbffb
--- /dev/null
+++ b/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
@@ -0,0 +1,44 @@
+/** @file
+  The microcode patch HOB is used to store the information of:
+    A. Base address and size of the loaded microcode patches data;
+    B. Detected microcode patch for each processor within system.
+
+  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef _MICROCODE_PATCH_HOB_H_
+#define _MICROCODE_PATCH_HOB_H_
+
+extern EFI_GUID gEdkiiMicrocodePatchHobGuid;
+
+//
+// The EDKII microcode patch HOB will be produced by MpInitLib and it can be
+// consumed by modules that want to detect/apply microcode patches.
+//
+typedef struct {
+  //
+  // The base address of the microcode patches data after being loaded into
+  // memory.
+  //
+  UINT64    MicrocodePatchAddress;
+  //
+  // The total size of the loaded microcode patches.
+  //
+  UINT64    MicrocodePatchRegionSize;
+  //
+  // The number of processors within the system.
+  //
+  UINT32    ProcessorCount;
+  //
+  // An array with 'ProcessorCount' elements that stores the offset (with
+  // regard to 'MicrocodePatchAddress') of the detected microcode patch
+  // (including the CPU_MICROCODE_HEADER data structure) for each processor.
+  // If no microcode patch is detected for certain processor, the relating
+  // element will be set to MAX_UINT64.
+  //
+  UINT64    ProcessorSpecificPatchOffset[0];
+} EDKII_MICROCODE_PATCH_HOB;
+
+#endif
-- 
2.12.0.windows.1