From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: devel@edk2.groups.io
Cc: Antoine Coeur <coeur@gmx.fr>, Jian J Wang <jian.j.wang@intel.com>,
Hao A Wu <hao.a.wu@intel.com>, Ray Ni <ray.ni@intel.com>,
Philippe Mathieu-Daude <philmd@redhat.com>
Subject: [PATCH v2 15/78] MdeModulePkg/Bus/Sd: Fix various typos
Date: Fri, 3 Jan 2020 10:07:09 +0100 [thread overview]
Message-ID: <20200103090812.10592-16-philmd@redhat.com> (raw)
In-Reply-To: <20200103090812.10592-1-philmd@redhat.com>
From: Antoine Coeur <coeur@gmx.fr>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
---
MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h | 2 +-
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h | 6 +++---
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h | 2 +-
MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h | 6 +++---
MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h | 2 +-
MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c | 2 +-
MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c | 12 ++++++------
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c | 12 ++++++------
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c | 2 +-
MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c | 2 +-
MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c | 6 +++---
MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c | 10 +++++-----
MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c | 2 +-
13 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
index c0e461335f43..4e3e51d14403 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
@@ -244,7 +244,7 @@ EmmcPeimHcInitHost (
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
@param[in] Slot The slot number of the Emmc card to send the command to.
- @param[in] Access The access mode of SWTICH command.
+ @param[in] Access The access mode of SWITCH command.
@param[in] Index The offset of the field to be access.
@param[in] Value The value to be set to the specified field of EXT_CSD register.
@param[in] CmdSet The value of CmdSet field of EXT_CSD register.
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
index 86957a42daea..62e70ae912b0 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
@@ -43,7 +43,7 @@ EmmcReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -73,7 +73,7 @@ EmmcReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -176,7 +176,7 @@ EmmcReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
index d286d97f4213..5ecce41dee11 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
@@ -235,7 +235,7 @@ EmmcDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
index 769b47106400..b6b4c45f1f3d 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
@@ -43,7 +43,7 @@ SdReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -73,7 +73,7 @@ SdReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -176,7 +176,7 @@ SdReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
index d23f5a07a511..ff740a52183b 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
@@ -210,7 +210,7 @@ SdDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
index c60ac30421e6..19a0afcb6d2c 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
@@ -128,7 +128,7 @@ EmmcPeimAllocMemFromBlock (
//
// If current bit is zero, the corresponding memory unit is
// available, otherwise we need to restart our searching.
- // Available counts the consective number of zero bit.
+ // Available counts the consecutive number of zero bit.
//
if (!EMMC_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {
Available++;
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
index 679646eeb277..287a10266a6a 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
@@ -1290,7 +1290,7 @@ EmmcPeimExecTrb (
BlkCount = 0;
if (Trb->Mode != EmmcNoData) {
//
- // Calcuate Block Count.
+ // Calculate Block Count.
//
BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
}
@@ -2017,7 +2017,7 @@ EmmcPeimGetExtCsd (
Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
@param[in] Slot The slot number of the Emmc card to send the command to.
- @param[in] Access The access mode of SWTICH command.
+ @param[in] Access The access mode of SWITCH command.
@param[in] Index The offset of the field to be access.
@param[in] Value The value to be set to the specified field of EXT_CSD register.
@param[in] CmdSet The value of CmdSet field of EXT_CSD register.
@@ -2273,7 +2273,7 @@ EmmcPeimSendTuningBlk (
}
/**
- Tunning the clock to get HS200 optimal sampling point.
+ Tuning the clock to get HS200 optimal sampling point.
Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
tuning procedure.
@@ -2509,7 +2509,7 @@ EmmcPeimSwitchToHighSpeed (
return Status;
}
//
- // Set to Hight Speed timing
+ // Set to High Speed timing
//
HostCtrl1 = BIT2;
Status = EmmcPeimHcOrMmio (Slot->EmmcHcBase + EMMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
@@ -2658,7 +2658,7 @@ EmmcPeimSwitchToHS400 (
return Status;
}
//
- // Set to Hight Speed timing and set the clock frequency to a value less than 52MHz.
+ // Set to High Speed timing and set the clock frequency to a value less than 52MHz.
//
HsTiming = 1;
Status = EmmcPeimSwitchClockFreq (Slot, Rca, HsTiming, 52);
@@ -2752,7 +2752,7 @@ EmmcPeimSetBusMode (
BusWidth = 4;
}
//
- // Get Deivce_Type from EXT_CSD register.
+ // Get Device_Type from EXT_CSD register.
//
Status = EmmcPeimGetExtCsd (Slot, &Slot->ExtCsd);
if (EFI_ERROR (Status)) {
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
index 1b247af57622..afdc0a57efc9 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
@@ -9,7 +9,7 @@
#include "EmmcDxe.h"
/**
- Nonblocking I/O callback funtion when the event is signaled.
+ Nonblocking I/O callback function when the event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the
@@ -785,7 +785,7 @@ Error:
@retval EFI_WRITE_PROTECTED The device can not be read/written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read/write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -954,7 +954,7 @@ EmmcReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -993,7 +993,7 @@ EmmcReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -1151,7 +1151,7 @@ EmmcReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -2058,7 +2058,7 @@ EmmcEraseBlocks (
//
// If the size to erase is smaller than the erase group size, the whole
- // erase operation is performed by writting zeros.
+ // erase operation is performed by writing zeros.
//
if (BlockNum < EraseGroupSize) {
Status = EmmcWriteZeros (Partition, FirstLba, Size);
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
index e2ae56c5058a..e9095b904c56 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
@@ -812,7 +812,7 @@ EmmcDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
index 63a35cc2535c..fb043c19fffd 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
@@ -128,7 +128,7 @@ SdPeimAllocMemFromBlock (
//
// If current bit is zero, the corresponding memory unit is
// available, otherwise we need to restart our searching.
- // Available counts the consective number of zero bit.
+ // Available counts the consecutive number of zero bit.
//
if (!SD_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {
Available++;
diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
index 5efc06af5f8d..756c3063bbff 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
@@ -1290,7 +1290,7 @@ SdPeimExecTrb (
BlkCount = 0;
if (Trb->Mode != SdNoData) {
//
- // Calcuate Block Count.
+ // Calculate Block Count.
//
BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
}
@@ -2494,7 +2494,7 @@ SdPeimSendTuningBlk (
}
/**
- Tunning the sampling point of SDR104 or SDR50 bus speed mode.
+ Tuning the sampling point of SDR104 or SDR50 bus speed mode.
Command SD_SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
tuning procedure.
@@ -2702,7 +2702,7 @@ SdPeimSetBusMode (
return EFI_DEVICE_ERROR;
}
//
- // Set to Hight Speed timing
+ // Set to High Speed timing
//
if (AccessMode == 1) {
HostCtrl1 = BIT2;
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
index 876efe31e5d3..9f42abe7e2ad 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
@@ -9,7 +9,7 @@
#include "SdDxe.h"
/**
- Nonblocking I/O callback funtion when the event is signaled.
+ Nonblocking I/O callback function when the event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the
@@ -569,7 +569,7 @@ Error:
@retval EFI_WRITE_PROTECTED The device can not be read/written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read/write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -721,7 +721,7 @@ SdReset (
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -760,7 +760,7 @@ SdReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@@ -918,7 +918,7 @@ SdReadBlocksEx (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
index e341b4cc1c8d..73bcc181c13f 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
@@ -563,7 +563,7 @@ SdDxeDriverBindingSupported (
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failded to start the device.
+ @retval Others The driver failed to start the device.
**/
EFI_STATUS
--
2.21.0
next prev parent reply other threads:[~2020-01-03 9:09 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 9:06 [PATCH v2 00/78] Fix a bunch of typos (part 1) Philippe Mathieu-Daudé
2020-01-03 9:06 ` [PATCH v2 01/78] CryptoPkg/OpensslLib: Fix few typos Philippe Mathieu-Daudé
2020-01-06 2:39 ` Wang, Jian J
2020-01-03 9:06 ` [PATCH v2 02/78] EmbeddedPkg/VirtualKeyboard: Fix a typo in EFI_INVALID_PARAMETER Philippe Mathieu-Daudé
2020-01-08 12:41 ` Ard Biesheuvel
2020-01-03 9:06 ` [PATCH v2 03/78] EmbeddedPkg/VirtualKeyboard: Fix few typos Philippe Mathieu-Daudé
2020-01-08 12:42 ` Ard Biesheuvel
2020-01-08 14:26 ` Philippe Mathieu-Daudé
2020-01-03 9:06 ` [PATCH v2 04/78] EmulatorPkg/Sec: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:06 ` [PATCH v2 05/78] EmulatorPkg/Unix: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 06/78] EmulatorPkg/Win: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 07/78] FatPkg/EnhancedFatDxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 08/78] FatPkg/FatPei: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 09/78] MdeModulePkg/Application: Improve French translation Philippe Mathieu-Daudé
2020-02-07 0:49 ` Philippe Mathieu-Daudé
2020-02-07 0:53 ` [edk2-devel] " Wu, Hao A
2020-02-07 0:55 ` Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 10/78] MdeModulePkg/Application: Fix various typos Philippe Mathieu-Daudé
2020-02-07 0:26 ` [edk2-devel] " Wu, Hao A
2020-01-03 9:07 ` [PATCH v2 11/78] MdeModulePkg/Bus/Ata: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 12/78] MdeModulePkg/Bus/I2c: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 13/78] MdeModulePkg/Bus/Isa: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 14/78] MdeModulePkg/Bus/Scsi: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` Philippe Mathieu-Daudé [this message]
2020-01-03 9:07 ` [PATCH v2 16/78] MdeModulePkg/Core/Pei: " Philippe Mathieu-Daudé
2020-02-07 0:26 ` Wu, Hao A
2020-01-03 9:07 ` [PATCH v2 17/78] MdeModulePkg/Core/PiSmmCore: " Philippe Mathieu-Daudé
2020-02-07 0:26 ` Wu, Hao A
2020-01-03 9:07 ` [PATCH v2 18/78] MdeModulePkg/UsbBusDxe: Fix a typo Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 19/78] MdeModulePkg/UsbMass: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 20/78] MdeModulePkg/UsbMouse: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 21/78] MdeModulePkg/UsbBus: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 22/78] MdeModulePkg/Usb: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 23/78] MdePkg/IndustryStandard: " Philippe Mathieu-Daudé
2020-01-06 3:32 ` Liming Gao
2020-01-03 9:07 ` [PATCH v2 24/78] MdePkg/Library/Dxe: " Philippe Mathieu-Daudé
2020-01-06 3:35 ` Liming Gao
2020-01-03 9:07 ` [PATCH v2 25/78] MdePkg/Library/Pci: " Philippe Mathieu-Daudé
2020-01-06 3:35 ` [edk2-devel] " Liming Gao
2020-01-03 9:07 ` [PATCH v2 26/78] MdePkg/Library/Smm: " Philippe Mathieu-Daudé
2020-01-06 3:35 ` Liming Gao
2020-01-03 9:07 ` [PATCH v2 27/78] MdePkg/Ppi: " Philippe Mathieu-Daudé
2020-01-06 3:36 ` [edk2-devel] " Liming Gao
2020-01-03 9:07 ` [PATCH v2 28/78] MdePkg/Register: " Philippe Mathieu-Daudé
2020-01-06 3:38 ` Liming Gao
2020-01-03 9:07 ` [PATCH v2 29/78] NetworkPkg: Fix a typo Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 30/78] NetworkPkg/ArpDxe: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 31/78] NetworkPkg/Dhcp4Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 32/78] NetworkPkg/Dhcp6Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 33/78] NetworkPkg/DnsDxe: Fix a typo Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 34/78] NetworkPkg/DnsDxe: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 35/78] NetworkPkg/DpcDxe: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 36/78] NetworkPkg/HttpBootDxe: Fix a typo in variable name Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 37/78] NetworkPkg/HttpBootDxe: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 38/78] NetworkPkg/HttpDxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 39/78] NetworkPkg/Ip4Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 40/78] NetworkPkg/Ip6Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 41/78] NetworkPkg/IScsiDxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 42/78] NetworkPkg/Library: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 43/78] NetworkPkg/MnpDxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 44/78] NetworkPkg/Mtftp4Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 45/78] NetworkPkg/Mtftp6Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 46/78] NetworkPkg/SnpDxe: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 47/78] NetworkPkg/TcpDxe/Sock: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 48/78] NetworkPkg/TcpDxe/Tcp: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 49/78] NetworkPkg/Tls: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 50/78] NetworkPkg/Udp4Dxe: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 51/78] NetworkPkg/Udp6Dxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 52/78] NetworkPkg/UefiPxeBcDxe: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 53/78] NetworkPkg/VlanConfigDxe: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 54/78] OvmfPkg/Acpi: " Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 55/78] OvmfPkg/Csm: Fix various typos Philippe Mathieu-Daudé
2020-01-03 13:40 ` [edk2-devel] " Laszlo Ersek
2020-01-03 9:07 ` [PATCH v2 56/78] OvmfPkg/Csm/LegacyBios: Fix a typo Philippe Mathieu-Daudé
2020-01-03 13:40 ` [edk2-devel] " Laszlo Ersek
2020-01-03 9:07 ` [PATCH v2 57/78] OvmfPkg/Qemu: Fix various typos Philippe Mathieu-Daudé
2020-01-03 13:37 ` Laszlo Ersek
2020-01-03 9:07 ` [PATCH v2 58/78] OvmfPkg/Virtio: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 59/78] OvmfPkg/Xen: Fix a typo Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 60/78] OvmfPkg/Xen: Fix various typos Philippe Mathieu-Daudé
2020-01-03 13:42 ` [edk2-devel] " Laszlo Ersek
2020-01-06 10:36 ` Anthony PERARD
2020-01-06 16:06 ` Laszlo Ersek
2020-01-03 9:07 ` [PATCH v2 61/78] PcAtChipsetPkg: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:07 ` [PATCH v2 62/78] SecurityPkg: " Philippe Mathieu-Daudé
2020-01-03 9:56 ` [edk2-devel] " Yao, Jiewen
2020-01-03 9:07 ` [PATCH v2 63/78] SecurityPkg/Hash2DxeCrypto: " Philippe Mathieu-Daudé
2020-01-03 9:55 ` [edk2-devel] " Yao, Jiewen
2020-01-03 9:07 ` [PATCH v2 64/78] SecurityPkg/Library/Tpm: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:54 ` Yao, Jiewen
2020-01-03 9:07 ` [PATCH v2 65/78] SecurityPkg/Tcg: " Philippe Mathieu-Daudé
2020-01-03 9:56 ` [edk2-devel] " Yao, Jiewen
2020-01-03 9:08 ` [PATCH v2 66/78] SecurityPkg/VariableAuthenticated: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:56 ` Yao, Jiewen
2020-01-03 9:08 ` [PATCH v2 67/78] ShellPkg/Application: Fix various typos Philippe Mathieu-Daudé
2020-01-03 9:08 ` [PATCH v2 68/78] ShellPkg/DynamicCommand: " Philippe Mathieu-Daudé
2020-01-03 9:08 ` [PATCH v2 69/78] SignedCapsulePkg: " Philippe Mathieu-Daudé
2020-01-03 9:56 ` Yao, Jiewen
2020-01-03 9:08 ` [PATCH v2 70/78] SignedCapsulePkg/Universal: " Philippe Mathieu-Daudé
2020-01-03 12:13 ` Yao, Jiewen
2020-01-03 9:08 ` [PATCH v2 71/78] SourceLevelDebugPkg/DebugAgent: " Philippe Mathieu-Daudé
2020-01-03 9:08 ` [PATCH v2 72/78] SourceLevelDebugPkg/DebugCommunicationLib: " Philippe Mathieu-Daudé
2020-01-03 9:08 ` [PATCH v2 73/78] SourceLevelDebugPkg: Fix few typos Philippe Mathieu-Daudé
2020-01-03 9:08 ` [PATCH v2 74/78] StandaloneMmPkg: Fix a typo Philippe Mathieu-Daudé
2020-01-03 12:13 ` [edk2-devel] " Yao, Jiewen
2020-01-03 9:08 ` [PATCH v2 75/78] StandaloneMmPkg: Fix few typos Philippe Mathieu-Daudé
2020-01-03 12:14 ` Yao, Jiewen
2020-01-03 9:08 ` [PATCH v2 76/78] UefiCpuPkg/CpuDxe: " Philippe Mathieu-Daudé
2020-01-07 8:28 ` [edk2-devel] " Dong, Eric
2020-01-03 9:08 ` [PATCH v2 77/78] UefiCpuPkg/PiSmm: Fix various typos Philippe Mathieu-Daudé
2020-01-07 8:27 ` [edk2-devel] " Dong, Eric
2020-01-03 9:08 ` [PATCH v2 78/78] UefiCpuPkg/Smm: " Philippe Mathieu-Daudé
2020-01-07 8:28 ` Dong, Eric
2020-01-03 10:59 ` [PATCH v2 00/78] Fix a bunch of typos (part 1) Cœur
2020-01-07 12:44 ` [edk2-devel] " Maciej Rabeda
2020-01-17 17:13 ` Philippe Mathieu-Daudé
2020-01-19 5:14 ` [edk2-devel] " Liming Gao
2020-01-20 8:35 ` Philippe Mathieu-Daudé
2020-01-17 17:15 ` Philippe Mathieu-Daudé
2020-02-06 23:46 ` Philippe Mathieu-Daudé
2020-02-10 15:22 ` [edk2-devel] " Maciej Rabeda
2020-02-10 23:51 ` 答复: " Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200103090812.10592-16-philmd@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox