From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: devel@edk2.groups.io
Cc: Laszlo Ersek <lersek@redhat.com>, Eric Dong <eric.dong@intel.com>
Subject: [PATCH v3 14/78] MdeModulePkg/Bus/Scsi: Fix various typos
Date: Fri, 7 Feb 2020 02:07:27 +0100 [thread overview]
Message-ID: <20200207010831.9046-15-philmd@redhat.com> (raw)
In-Reply-To: <20200207010831.9046-1-philmd@redhat.com>
From: Antoine Coeur <coeur@gmx.fr>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
---
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h | 4 +--
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h | 10 +++---
MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c | 6 ++--
MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c | 32 ++++++++++----------
4 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h
index 917e937520a8..97581866b6f7 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h
+++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h
@@ -50,7 +50,7 @@ typedef struct {
} SCSI_EVENT_DATA;
//
-// SCSI Bus Controller device strcuture
+// SCSI Bus Controller device structure
//
#define SCSI_BUS_DEVICE_SIGNATURE SIGNATURE_32 ('s', 'c', 's', 'i')
@@ -450,7 +450,7 @@ ScsiExecuteSCSICommand (
@param This Protocol instance pointer
@param Controller Controller handle
- @param TargetId Tartget to be scanned
+ @param TargetId Target to be scanned
@param Lun The Lun of the SCSI device on the SCSI channel.
@param ScsiBusDev The pointer of SCSI_BUS_DEVICE
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
index 2d8679ec6fd0..ed9bbd6f8ba8 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.h
@@ -185,7 +185,7 @@ extern EFI_COMPONENT_NAME2_PROTOCOL gScsiDiskComponentName2;
//
// SCSI Disk Timeout Experience Value
//
-// As ScsiDisk and ScsiBus driver are used to manage SCSI or ATAPI devices, the timout
+// As ScsiDisk and ScsiBus driver are used to manage SCSI or ATAPI devices, the timeout
// value is updated to 30s to follow ATA/ATAPI spec in which the device may take up to 30s
// to respond command.
//
@@ -412,7 +412,7 @@ ScsiDiskComponentNameGetControllerName (
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
- @return EFI_STATUS is retured from EFI_SCSI_IO_PROTOCOL.ResetDevice().
+ @return EFI_STATUS is returned from EFI_SCSI_IO_PROTOCOL.ResetDevice().
**/
EFI_STATUS
@@ -464,7 +464,7 @@ ScsiDiskReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR Fail to detect media.
@retval EFI_NO_MEDIA Media is not present.
- @retval EFI_MEDIA_CHNAGED Media has changed.
+ @retval EFI_MEDIA_CHANGED Media has changed.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER Invalid parameter passed in.
@@ -1010,7 +1010,7 @@ CheckTargetStatus (
When encountering error during the process, if retrieve sense keys before
error encountered, it returns the sense keys with return status set to EFI_SUCCESS,
- and NeedRetry set to FALSE; otherwize, return the proper return status.
+ and NeedRetry set to FALSE; otherwise, return the proper return status.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param NeedRetry The pointer of flag indicates if need a retry
@@ -1444,7 +1444,7 @@ ScsiDiskIsHardwareError (
@param SenseCounts The number of sense key
@retval TRUE Media is changed.
- @retval FALSE Medit is NOT changed.
+ @retval FALSE Media is NOT changed.
**/
BOOLEAN
ScsiDiskIsMediaChange (
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
index 1caffd38cdcb..27b554ad3e1d 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
@@ -487,7 +487,7 @@ SCSIBusDriverBindingStart (
} else {
//
// If RemainingDevicePath is the End of Device Path Node,
- // skip enumerate any device and return EFI_SUCESSS
+ // skip enumerate any device and return EFI_SUCCESS
//
ScanOtherPuns = FALSE;
}
@@ -644,7 +644,7 @@ SCSIBusDriverBindingStop (
);
//
// When Start() succeeds to open ExtPassThru, it always tries to open PassThru BY_DRIVER.
- // Its intent is to prevent another SCSI Bus Driver from woking on the same host handle.
+ // Its intent is to prevent another SCSI Bus Driver from working on the same host handle.
// So Stop() needs to try to close PassThru if present here.
//
gBS->CloseProtocol (
@@ -1099,7 +1099,7 @@ ScsiExecuteSCSICommand (
@param This Protocol instance pointer
@param Controller Controller handle
- @param TargetId Tartget to be scanned
+ @param TargetId Target to be scanned
@param Lun The Lun of the SCSI device on the SCSI channel.
@param ScsiBusDev The pointer of SCSI_BUS_DEVICE
diff --git a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
index 6bfcf03a4b41..c80e78fa8a6b 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c
@@ -704,7 +704,7 @@ ScsiDiskReadBlocks (
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR Fail to detect media.
@retval EFI_NO_MEDIA Media is not present.
- @retval EFI_MEDIA_CHNAGED Media has changed.
+ @retval EFI_MEDIA_CHANGED Media has changed.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER Invalid parameter passed in.
@@ -3166,7 +3166,7 @@ CheckTargetStatus (
When encountering error during the process, if retrieve sense keys before
error encountered, it returns the sense keys with return status set to EFI_SUCCESS,
- and NeedRetry set to FALSE; otherwize, return the proper return status.
+ and NeedRetry set to FALSE; otherwise, return the proper return status.
@param ScsiDiskDevice The pointer of SCSI_DISK_DEV
@param NeedRetry The pointer of flag indicates if need a retry
@@ -3438,7 +3438,7 @@ ScsiDiskReadSectors (
// As ScsiDisk and ScsiBus driver are used to manage SCSI or ATAPI devices, we have to use
// the lowest transfer rate to calculate the possible maximum timeout value for each operation.
// From the above table, we could know 2.1Mbytes per second is lowest one.
- // The timout value is rounded up to nearest integar and here an additional 30s is added
+ // The timeout value is rounded up to nearest integer and here an additional 30s is added
// to follow ATA spec in which it mentioned that the device may take up to 30s to respond
// commands in the Standby/Idle mode.
//
@@ -3482,7 +3482,7 @@ ScsiDiskReadSectors (
// it is invalid to request more sectors in the CDB than the entire
// transfer (ie. ByteCount) can carry.
//
- // In addition, ByteCount is only expected to go down, or stay unchaged.
+ // In addition, ByteCount is only expected to go down, or stay unchanged.
// Therefore we don't need to update Timeout: the original timeout should
// accommodate shorter transfers too.
//
@@ -3603,7 +3603,7 @@ ScsiDiskWriteSectors (
// As ScsiDisk and ScsiBus driver are used to manage SCSI or ATAPI devices, we have to use
// the lowest transfer rate to calculate the possible maximum timeout value for each operation.
// From the above table, we could know 2.1Mbytes per second is lowest one.
- // The timout value is rounded up to nearest integar and here an additional 30s is added
+ // The timeout value is rounded up to nearest integer and here an additional 30s is added
// to follow ATA spec in which it mentioned that the device may take up to 30s to respond
// commands in the Standby/Idle mode.
//
@@ -3646,7 +3646,7 @@ ScsiDiskWriteSectors (
// it is invalid to request more sectors in the CDB than the entire
// transfer (ie. ByteCount) can carry.
//
- // In addition, ByteCount is only expected to go down, or stay unchaged.
+ // In addition, ByteCount is only expected to go down, or stay unchanged.
// Therefore we don't need to update Timeout: the original timeout should
// accommodate shorter transfers too.
//
@@ -3787,7 +3787,7 @@ ScsiDiskAsyncReadSectors (
// we have to use the lowest transfer rate to calculate the possible
// maximum timeout value for each operation.
// From the above table, we could know 2.1Mbytes per second is lowest one.
- // The timout value is rounded up to nearest integar and here an additional
+ // The timeout value is rounded up to nearest integer and here an additional
// 30s is added to follow ATA spec in which it mentioned that the device
// may take up to 30s to respond commands in the Standby/Idle mode.
//
@@ -4004,7 +4004,7 @@ ScsiDiskAsyncWriteSectors (
// we have to use the lowest transfer rate to calculate the possible
// maximum timeout value for each operation.
// From the above table, we could know 2.1Mbytes per second is lowest one.
- // The timout value is rounded up to nearest integar and here an additional
+ // The timeout value is rounded up to nearest integer and here an additional
// 30s is added to follow ATA spec in which it mentioned that the device
// may take up to 30s to respond commands in the Standby/Idle mode.
//
@@ -4143,10 +4143,10 @@ ScsiDiskRead10 (
UINTN Action;
//
- // Implement a backoff algorithem to resolve some compatibility issues that
+ // Implement a backoff algorithm to resolve some compatibility issues that
// some SCSI targets or ATAPI devices couldn't correctly response reading/writing
// big data in a single operation.
- // This algorithem will at first try to execute original request. If the request fails
+ // This algorithm will at first try to execute original request. If the request fails
// with media error sense data or else, it will reduce the transfer length to half and
// try again till the operation succeeds or fails with one sector transfer length.
//
@@ -4268,10 +4268,10 @@ ScsiDiskWrite10 (
UINTN Action;
//
- // Implement a backoff algorithem to resolve some compatibility issues that
+ // Implement a backoff algorithm to resolve some compatibility issues that
// some SCSI targets or ATAPI devices couldn't correctly response reading/writing
// big data in a single operation.
- // This algorithem will at first try to execute original request. If the request fails
+ // This algorithm will at first try to execute original request. If the request fails
// with media error sense data or else, it will reduce the transfer length to half and
// try again till the operation succeeds or fails with one sector transfer length.
//
@@ -4391,10 +4391,10 @@ ScsiDiskRead16 (
UINTN Action;
//
- // Implement a backoff algorithem to resolve some compatibility issues that
+ // Implement a backoff algorithm to resolve some compatibility issues that
// some SCSI targets or ATAPI devices couldn't correctly response reading/writing
// big data in a single operation.
- // This algorithem will at first try to execute original request. If the request fails
+ // This algorithm will at first try to execute original request. If the request fails
// with media error sense data or else, it will reduce the transfer length to half and
// try again till the operation succeeds or fails with one sector transfer length.
//
@@ -4515,10 +4515,10 @@ ScsiDiskWrite16 (
UINTN Action;
//
- // Implement a backoff algorithem to resolve some compatibility issues that
+ // Implement a backoff algorithm to resolve some compatibility issues that
// some SCSI targets or ATAPI devices couldn't correctly response reading/writing
// big data in a single operation.
- // This algorithem will at first try to execute original request. If the request fails
+ // This algorithm will at first try to execute original request. If the request fails
// with media error sense data or else, it will reduce the transfer length to half and
// try again till the operation succeeds or fails with one sector transfer length.
//
--
2.21.1
next prev parent reply other threads:[~2020-02-07 1:09 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-07 1:07 [PATCH v3 00/78] Fix a bunch of typos (part 1) Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 01/78] CryptoPkg/OpensslLib: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 02/78] EmbeddedPkg/VirtualKeyboard: Fix a typo in EFI_INVALID_PARAMETER Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 03/78] EmbeddedPkg/VirtualKeyboard: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 04/78] EmulatorPkg/Sec: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 05/78] EmulatorPkg/Unix: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 06/78] EmulatorPkg/Win: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 07/78] FatPkg/EnhancedFatDxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 08/78] FatPkg/FatPei: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 09/78] MdeModulePkg/Application: Improve French translation Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 10/78] MdeModulePkg/Application: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 11/78] MdeModulePkg/Bus/Ata: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 12/78] MdeModulePkg/Bus/I2c: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 13/78] MdeModulePkg/Bus/Isa: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` Philippe Mathieu-Daudé [this message]
2020-02-07 1:07 ` [PATCH v3 15/78] MdeModulePkg/Bus/Sd: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 16/78] MdeModulePkg/Core/Pei: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 17/78] MdeModulePkg/Core/PiSmmCore: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 18/78] MdeModulePkg/UsbBusDxe: Fix a typo Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 19/78] MdeModulePkg/UsbMass: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 20/78] MdeModulePkg/UsbMouse: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 21/78] MdeModulePkg/UsbBus: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 22/78] MdeModulePkg/Usb: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 23/78] MdePkg/IndustryStandard: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 24/78] MdePkg/Library/Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 25/78] MdePkg/Library/Pci: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 26/78] MdePkg/Library/Smm: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 27/78] MdePkg/Ppi: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 28/78] MdePkg/Register: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 29/78] NetworkPkg: Fix a typo Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 30/78] NetworkPkg/ArpDxe: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 31/78] NetworkPkg/Dhcp4Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 32/78] NetworkPkg/Dhcp6Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 33/78] NetworkPkg/DnsDxe: Fix a typo Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 34/78] NetworkPkg/DnsDxe: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 35/78] NetworkPkg/DpcDxe: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 36/78] NetworkPkg/HttpBootDxe: Fix a typo in variable name Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 37/78] NetworkPkg/HttpBootDxe: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 38/78] NetworkPkg/HttpDxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 39/78] NetworkPkg/Ip4Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 40/78] NetworkPkg/Ip6Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 41/78] NetworkPkg/IScsiDxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 42/78] NetworkPkg/Library: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 43/78] NetworkPkg/MnpDxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 44/78] NetworkPkg/Mtftp4Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 45/78] NetworkPkg/Mtftp6Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:07 ` [PATCH v3 46/78] NetworkPkg/SnpDxe: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 47/78] NetworkPkg/TcpDxe/Sock: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 48/78] NetworkPkg/TcpDxe/Tcp: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 49/78] NetworkPkg/Tls: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 50/78] NetworkPkg/Udp4Dxe: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 51/78] NetworkPkg/Udp6Dxe: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 52/78] NetworkPkg/UefiPxeBcDxe: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 53/78] NetworkPkg/VlanConfigDxe: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 54/78] OvmfPkg/Acpi: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 55/78] OvmfPkg/Csm: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 56/78] OvmfPkg/Csm/LegacyBios: Fix a typo Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 57/78] OvmfPkg/Qemu: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 58/78] OvmfPkg/Virtio: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 59/78] OvmfPkg/Xen: Fix a typo Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 60/78] OvmfPkg/Xen: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 61/78] PcAtChipsetPkg: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 62/78] SecurityPkg: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 63/78] SecurityPkg/Hash2DxeCrypto: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 64/78] SecurityPkg/Library/Tpm: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 65/78] SecurityPkg/Tcg: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 66/78] SecurityPkg/VariableAuthenticated: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 67/78] ShellPkg/Application: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 68/78] ShellPkg/DynamicCommand: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 69/78] SignedCapsulePkg: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 70/78] SignedCapsulePkg/Universal: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 71/78] SourceLevelDebugPkg/DebugAgent: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 72/78] SourceLevelDebugPkg/DebugCommunicationLib: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 73/78] SourceLevelDebugPkg: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 74/78] StandaloneMmPkg: Fix a typo Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 75/78] StandaloneMmPkg: Fix few typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 76/78] UefiCpuPkg/CpuDxe: " Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 77/78] UefiCpuPkg/PiSmm: Fix various typos Philippe Mathieu-Daudé
2020-02-07 1:08 ` [PATCH v3 78/78] UefiCpuPkg/Smm: " Philippe Mathieu-Daudé
2020-02-07 10:51 ` [PATCH v3 00/78] Fix a bunch of typos (part 1) Laszlo Ersek
2020-02-10 22:54 ` [edk2-devel] " Laszlo Ersek
2020-02-11 12:12 ` Philippe Mathieu-Daudé
2020-02-12 12:02 ` Laszlo Ersek
2020-02-12 17:01 ` Cœur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200207010831.9046-15-philmd@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox