[PATCH v3 15/78] MdeModulePkg/Bus/Sd: Fix various typos

["Philippe Mathieu-Daudé" <philmd@redhat.com>]

From: Antoine Coeur <coeur@gmx.fr>

Fix various typos in comments and documentation.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
---
 MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h   |  2 +-
 MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h      |  6 +++---
 MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h          |  2 +-
 MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h          |  6 +++---
 MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h              |  2 +-
 MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c |  2 +-
 MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c   | 12 ++++++------
 MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c      | 12 ++++++------
 MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c          |  2 +-
 MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c     |  2 +-
 MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c       |  6 +++---
 MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c          | 10 +++++-----
 MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c              |  2 +-
 13 files changed, 33 insertions(+), 33 deletions(-)

diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
index c0e461335f43..4e3e51d14403 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
@@ -244,7 +244,7 @@ EmmcPeimHcInitHost (
   Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
 
   @param[in] Slot           The slot number of the Emmc card to send the command to.
-  @param[in] Access         The access mode of SWTICH command.
+  @param[in] Access         The access mode of SWITCH command.
   @param[in] Index          The offset of the field to be access.
   @param[in] Value          The value to be set to the specified field of EXT_CSD register.
   @param[in] CmdSet         The value of CmdSet field of EXT_CSD register.
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
index 86957a42daea..62e70ae912b0 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
@@ -43,7 +43,7 @@ EmmcReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -73,7 +73,7 @@ EmmcReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -176,7 +176,7 @@ EmmcReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
index d286d97f4213..5ecce41dee11 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
@@ -235,7 +235,7 @@ EmmcDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.
   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.
   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.
-  @retval Others                   The driver failded to start the device.
+  @retval Others                   The driver failed to start the device.
 
 **/
 EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
index 769b47106400..b6b4c45f1f3d 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
@@ -43,7 +43,7 @@ SdReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -73,7 +73,7 @@ SdReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -176,7 +176,7 @@ SdReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
index d23f5a07a511..ff740a52183b 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
@@ -210,7 +210,7 @@ SdDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.
   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.
   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.
-  @retval Others                   The driver failded to start the device.
+  @retval Others                   The driver failed to start the device.
 
 **/
 EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
index c60ac30421e6..19a0afcb6d2c 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
@@ -128,7 +128,7 @@ EmmcPeimAllocMemFromBlock (
     //
     // If current bit is zero, the corresponding memory unit is
     // available, otherwise we need to restart our searching.
-    // Available counts the consective number of zero bit.
+    // Available counts the consecutive number of zero bit.
     //
     if (!EMMC_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {
       Available++;
diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
index 679646eeb277..287a10266a6a 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
@@ -1290,7 +1290,7 @@ EmmcPeimExecTrb (
   BlkCount = 0;
   if (Trb->Mode != EmmcNoData) {
     //
-    // Calcuate Block Count.
+    // Calculate Block Count.
     //
     BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
   }
@@ -2017,7 +2017,7 @@ EmmcPeimGetExtCsd (
   Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
 
   @param[in] Slot           The slot number of the Emmc card to send the command to.
-  @param[in] Access         The access mode of SWTICH command.
+  @param[in] Access         The access mode of SWITCH command.
   @param[in] Index          The offset of the field to be access.
   @param[in] Value          The value to be set to the specified field of EXT_CSD register.
   @param[in] CmdSet         The value of CmdSet field of EXT_CSD register.
@@ -2273,7 +2273,7 @@ EmmcPeimSendTuningBlk (
 }
 
 /**
-  Tunning the clock to get HS200 optimal sampling point.
+  Tuning the clock to get HS200 optimal sampling point.
 
   Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
   tuning procedure.
@@ -2509,7 +2509,7 @@ EmmcPeimSwitchToHighSpeed (
     return Status;
   }
   //
-  // Set to Hight Speed timing
+  // Set to High Speed timing
   //
   HostCtrl1 = BIT2;
   Status = EmmcPeimHcOrMmio (Slot->EmmcHcBase + EMMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);
@@ -2658,7 +2658,7 @@ EmmcPeimSwitchToHS400 (
     return Status;
   }
   //
-  // Set to Hight Speed timing and set the clock frequency to a value less than 52MHz.
+  // Set to High Speed timing and set the clock frequency to a value less than 52MHz.
   //
   HsTiming = 1;
   Status = EmmcPeimSwitchClockFreq (Slot, Rca, HsTiming, 52);
@@ -2752,7 +2752,7 @@ EmmcPeimSetBusMode (
     BusWidth = 4;
   }
   //
-  // Get Deivce_Type from EXT_CSD register.
+  // Get Device_Type from EXT_CSD register.
   //
   Status = EmmcPeimGetExtCsd (Slot, &Slot->ExtCsd);
   if (EFI_ERROR (Status)) {
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
index 1b247af57622..afdc0a57efc9 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
@@ -9,7 +9,7 @@
 #include "EmmcDxe.h"
 
 /**
-  Nonblocking I/O callback funtion when the event is signaled.
+  Nonblocking I/O callback function when the event is signaled.
 
   @param[in]  Event     The Event this notify function registered to.
   @param[in]  Context   Pointer to the context data registered to the
@@ -785,7 +785,7 @@ EmmcRwMultiBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be read/written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read/write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -954,7 +954,7 @@ EmmcReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -993,7 +993,7 @@ EmmcReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -1151,7 +1151,7 @@ EmmcReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -2058,7 +2058,7 @@ EmmcEraseBlocks (
 
     //
     // If the size to erase is smaller than the erase group size, the whole
-    // erase operation is performed by writting zeros.
+    // erase operation is performed by writing zeros.
     //
     if (BlockNum < EraseGroupSize) {
       Status = EmmcWriteZeros (Partition, FirstLba, Size);
diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
index e2ae56c5058a..e9095b904c56 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
@@ -812,7 +812,7 @@ EmmcDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.
   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.
   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.
-  @retval Others                   The driver failded to start the device.
+  @retval Others                   The driver failed to start the device.
 
 **/
 EFI_STATUS
diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
index 63a35cc2535c..fb043c19fffd 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
@@ -128,7 +128,7 @@ SdPeimAllocMemFromBlock (
     //
     // If current bit is zero, the corresponding memory unit is
     // available, otherwise we need to restart our searching.
-    // Available counts the consective number of zero bit.
+    // Available counts the consecutive number of zero bit.
     //
     if (!SD_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {
       Available++;
diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
index 5efc06af5f8d..756c3063bbff 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
@@ -1290,7 +1290,7 @@ SdPeimExecTrb (
   BlkCount = 0;
   if (Trb->Mode != SdNoData) {
     //
-    // Calcuate Block Count.
+    // Calculate Block Count.
     //
     BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);
   }
@@ -2494,7 +2494,7 @@ SdPeimSendTuningBlk (
 }
 
 /**
-  Tunning the sampling point of SDR104 or SDR50 bus speed mode.
+  Tuning the sampling point of SDR104 or SDR50 bus speed mode.
 
   Command SD_SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
   tuning procedure.
@@ -2702,7 +2702,7 @@ SdPeimSetBusMode (
     return EFI_DEVICE_ERROR;
   }
   //
-  // Set to Hight Speed timing
+  // Set to High Speed timing
   //
   if (AccessMode == 1) {
     HostCtrl1 = BIT2;
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
index 876efe31e5d3..9f42abe7e2ad 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
@@ -9,7 +9,7 @@
 #include "SdDxe.h"
 
 /**
-  Nonblocking I/O callback funtion when the event is signaled.
+  Nonblocking I/O callback function when the event is signaled.
 
   @param[in]  Event     The Event this notify function registered to.
   @param[in]  Context   Pointer to the context data registered to the
@@ -569,7 +569,7 @@ SdRwMultiBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be read/written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read/write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -721,7 +721,7 @@ SdReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -760,7 +760,7 @@ SdReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
@@ -918,7 +918,7 @@ SdReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.
   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
   @retval EFI_NO_MEDIA          There is no media in the device.
-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.
   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.
diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
index e341b4cc1c8d..73bcc181c13f 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
@@ -563,7 +563,7 @@ SdDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.
   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.
   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.
-  @retval Others                   The driver failded to start the device.
+  @retval Others                   The driver failed to start the device.
 
 **/
 EFI_STATUS
-- 
2.21.1