From: "Leif Lindholm" <leif@nuviainc.com>
To: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Cc: devel@edk2.groups.io, michael.d.kinney@intel.com,
Ard.Biesheuvel@arm.com, thomas.abraham@arm.com
Subject: Re: [edk2-platforms] [PATCH v2 0/5] Platform/ARM/SgiPkg: Add support for RD-N1-Edge-Dual platform
Date: Thu, 13 Feb 2020 17:31:47 +0000 [thread overview]
Message-ID: <20200213173147.GQ23627@bivouac.eciton.net> (raw)
In-Reply-To: <1581514167-1340-1-git-send-email-vijayenthiran.subramaniam@arm.com>
On the whole, looks good.
If you can resubmit v3 versions of patches 2-3 only based on feedback,
that would suffice.
On a separate note:
Could someone in ARM take an action item to go and figure out who
should be default reviewer for the various ARM ltd platforms (virtual
or not), and submit a patch to Maintainers.txt adding some R:?
Best Regards,
Leif
On Wed, Feb 12, 2020 at 18:59:22 +0530, Vijayenthiran Subramaniam wrote:
> Changes since v1:
> - Fix typo which caused build error
>
> This patch series adds support for RD-N1-Edge platform with multi-chip
> capability. The first patch in this series is an improvement to SgiPkg to avoid
> any usage of deprecated APIs. The second patch refactors the existing code to
> use lookup table in order to identify the platform. The rest of the patch adds
> multi-chip support for the RD-N1-Edge platform.
>
> Vijayenthiran Subramaniam (5):
> Platform/ARM/SgiPkg: Disable use of deprecated APIs
> Platform/ARM/SgiPkg: Use lookup table to install ACPI table
> Platform/ARM/SgiPkg: Add MultiChipMode to Platform Descriptor
> Platform/ARM/Sgi: Add ACPI tables for dual-chip RD-N1-Edge platform
> Platform/ARM/Sgi: Add initial support for RD-N1-Edge-Dual platform
>
> Platform/ARM/SgiPkg/SgiPlatform.dec | 1 +
> Platform/ARM/SgiPkg/PlatformStandaloneMm.dsc | 3 +
> Platform/ARM/SgiPkg/SgiPlatform.dsc | 4 +
> Platform/ARM/SgiPkg/SgiPlatform.fdf | 1 +
> Platform/ARM/SgiPkg/AcpiTables/RdN1EdgeX2AcpiTables.inf | 59 ++++++
> Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf | 1 +
> Platform/ARM/SgiPkg/Include/SgiPlatform.h | 7 +
> Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c | 61 +++++-
> Platform/ARM/SgiPkg/Library/SgiPlatformPei/SgiPlatformPeim.c | 8 +
> Platform/ARM/SgiPkg/AcpiTables/RdN1EdgeX2/Madt.aslc | 198 ++++++++++++++++++++
> 10 files changed, 333 insertions(+), 10 deletions(-)
> create mode 100644 Platform/ARM/SgiPkg/AcpiTables/RdN1EdgeX2AcpiTables.inf
> create mode 100644 Platform/ARM/SgiPkg/AcpiTables/RdN1EdgeX2/Madt.aslc
>
> --
> 2.7.4
>
next prev parent reply other threads:[~2020-02-13 17:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 13:29 [edk2-platforms] [PATCH v2 0/5] Platform/ARM/SgiPkg: Add support for RD-N1-Edge-Dual platform Vijayenthiran Subramaniam
2020-02-12 13:29 ` [edk2-platforms] [PATCH v2 1/5] Platform/ARM/SgiPkg: Disable use of deprecated APIs Vijayenthiran Subramaniam
2020-02-13 16:56 ` Leif Lindholm
2020-02-12 13:29 ` [edk2-platforms] [PATCH v2 2/5] Platform/ARM/SgiPkg: Use lookup table to install ACPI table Vijayenthiran Subramaniam
2020-02-13 17:14 ` Leif Lindholm
2020-02-12 13:29 ` [edk2-platforms] [PATCH v2 3/5] Platform/ARM/SgiPkg: Add MultiChipMode to Platform Descriptor Vijayenthiran Subramaniam
2020-02-13 17:16 ` Leif Lindholm
2020-02-12 13:29 ` [edk2-platforms] [PATCH v2 4/5] Platform/ARM/Sgi: Add ACPI tables for dual-chip RD-N1-Edge platform Vijayenthiran Subramaniam
2020-02-13 17:22 ` Leif Lindholm
2020-02-12 13:29 ` [edk2-platforms] [PATCH v2 5/5] Platform/ARM/Sgi: Add initial support for RD-N1-Edge-Dual platform Vijayenthiran Subramaniam
2020-02-13 17:23 ` Leif Lindholm
2020-02-13 17:31 ` Leif Lindholm [this message]
2020-02-14 13:52 ` [edk2-devel] [edk2-platforms] [PATCH v2 0/5] Platform/ARM/SgiPkg: Add " Vijayenthiran Subramaniam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200213173147.GQ23627@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox