public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Pete Batard" <pete@akeo.ie>
To: devel@edk2.groups.io
Cc: ard.biesheuvel@linaro.org, leif@nuviainc.com, philmd@redhat.com,
	awarkentin@vmware.com
Subject: [edk2-devel][PATCH 1/5] Platform/RPi: Add firmware call to read installed memory size
Date: Tue,  3 Mar 2020 10:33:35 +0000	[thread overview]
Message-ID: <20200303103339.7468-2-pete@akeo.ie> (raw)
In-Reply-To: <20200303103339.7468-1-pete@akeo.ie>

From: Andrei Warkentin <andrey.warkentin@gmail.com>

Add a new RPiFirmwareGetModelInstalledMB () call in RpiFirmwareDxe
to return the amount of detected installed RAM on the system (in MB).

Use the new call in PlatformSmbiosDxe.

Signed-off-by: Pete Batard <pete@akeo.ie>
---
 Platform/RaspberryPi/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c | 10 ++---
 Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c       | 29 +++++++++++-
 Platform/RaspberryPi/Include/Protocol/RpiFirmware.h                | 47 +++++++++++---------
 3 files changed, 59 insertions(+), 27 deletions(-)

diff --git a/Platform/RaspberryPi/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c b/Platform/RaspberryPi/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
index f25c439f89c8..5585cb846f41 100644
--- a/Platform/RaspberryPi/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
+++ b/Platform/RaspberryPi/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
@@ -870,21 +870,19 @@ MemArrMapInfoUpdateSmbiosType19 (
   )
 {
   EFI_STATUS Status;
-  UINT32 BoardRevision = 0;
+  UINT32 InstalledMB = 0;
 
   // Note: Type 19 addresses are expressed in KB, not bytes
   // The memory layout used in all known Pi SoC's starts at 0
   mMemArrMapInfoType19.StartingAddress = 0;
+
   // The minimum RAM size used on any Raspberry Pi model is 256 MB
   mMemArrMapInfoType19.EndingAddress = 256 * 1024;
-  Status = mFwProtocol->GetModelRevision (&BoardRevision);
+  Status = mFwProtocol->GetModelInstalledMB (&InstalledMB);
   if (Status != EFI_SUCCESS) {
     DEBUG ((DEBUG_WARN, "Couldn't get the board memory size - defaulting to 256 MB: %r\n", Status));
   } else {
-    // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
-    // Bits [20-22] indicate the amount of memory starting with 256MB (000b)
-    // and doubling in size for each value (001b = 512 MB, 010b = 1GB, etc.)
-    mMemArrMapInfoType19.EndingAddress <<= (BoardRevision >> 20) & 0x07;
+    mMemArrMapInfoType19.EndingAddress = InstalledMB * 1024;
   }
   mMemArrMapInfoType19.EndingAddress -= 1;
 
diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
index 75826fdc0e53..40c78b5d57cf 100644
--- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
+++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
@@ -606,6 +606,32 @@ RpiFirmwareGetModelName (
   }
 }
 
+STATIC
+EFI_STATUS
+EFIAPI
+RPiFirmwareGetModelInstalledMB (
+  OUT   UINT32 *InstalledMB
+  )
+{
+  EFI_STATUS Status;
+  UINT32     Revision;
+
+  Status = RpiFirmwareGetModelRevision(&Revision);
+  if (EFI_ERROR(Status)) {
+    DEBUG ((DEBUG_ERROR, "%a: Could not get the board revision: Status == %r\n",
+      __FUNCTION__, Status));
+    return EFI_DEVICE_ERROR;
+  }
+
+  //
+  // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
+  // Bits [20-22] indicate the amount of memory starting with 256MB (000b)
+  // and doubling in size for each value (001b = 512 MB, 010b = 1GB, etc.)
+  //
+  *InstalledMB = 256 << ((Revision >> 20) & 0x07);
+  return EFI_SUCCESS;
+}
+
 STATIC
 EFI_STATUS
 EFIAPI
@@ -1236,7 +1262,8 @@ STATIC RASPBERRY_PI_FIRMWARE_PROTOCOL mRpiFirmwareProtocol = {
   RpiFirmwareGetFirmwareRevision,
   RpiFirmwareGetManufacturerName,
   RpiFirmwareGetCpuName,
-  RpiFirmwareGetArmMemory
+  RpiFirmwareGetArmMemory,
+  RPiFirmwareGetModelInstalledMB,
 };
 
 /**
diff --git a/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h b/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
index e3287e3c040f..108becbd3b6d 100644
--- a/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
+++ b/Platform/RaspberryPi/Include/Protocol/RpiFirmware.h
@@ -115,6 +115,12 @@ EFI_STATUS
   UINT32 *Revision
   );
 
+typedef
+EFI_STATUS
+(EFIAPI *GET_MODEL_INSTALLED_MB) (
+  UINT32 *InstalledMB
+  );
+
 typedef
 CHAR8*
 (EFIAPI *GET_MANUFACTURER_NAME) (
@@ -135,26 +141,27 @@ EFI_STATUS
   );
 
 typedef struct {
-  SET_POWER_STATE       SetPowerState;
-  GET_MAC_ADDRESS       GetMacAddress;
-  GET_COMMAND_LINE      GetCommandLine;
-  GET_CLOCK_RATE        GetClockRate;
-  GET_CLOCK_RATE        GetMaxClockRate;
-  GET_CLOCK_RATE        GetMinClockRate;
-  SET_CLOCK_RATE        SetClockRate;
-  GET_FB                GetFB;
-  FREE_FB               FreeFB;
-  GET_FB_SIZE           GetFBSize;
-  SET_LED               SetLed;
-  GET_SERIAL            GetSerial;
-  GET_MODEL             GetModel;
-  GET_MODEL_REVISION    GetModelRevision;
-  GET_MODEL_NAME        GetModelName;
-  GET_MODEL_FAMILY      GetModelFamily;
-  GET_FIRMWARE_REVISION GetFirmwareRevision;
-  GET_MANUFACTURER_NAME GetManufacturerName;
-  GET_CPU_NAME          GetCpuName;
-  GET_ARM_MEM           GetArmMem;
+  SET_POWER_STATE        SetPowerState;
+  GET_MAC_ADDRESS        GetMacAddress;
+  GET_COMMAND_LINE       GetCommandLine;
+  GET_CLOCK_RATE         GetClockRate;
+  GET_CLOCK_RATE         GetMaxClockRate;
+  GET_CLOCK_RATE         GetMinClockRate;
+  SET_CLOCK_RATE         SetClockRate;
+  GET_FB                 GetFB;
+  FREE_FB                FreeFB;
+  GET_FB_SIZE            GetFBSize;
+  SET_LED                SetLed;
+  GET_SERIAL             GetSerial;
+  GET_MODEL              GetModel;
+  GET_MODEL_REVISION     GetModelRevision;
+  GET_MODEL_NAME         GetModelName;
+  GET_MODEL_FAMILY       GetModelFamily;
+  GET_FIRMWARE_REVISION  GetFirmwareRevision;
+  GET_MANUFACTURER_NAME  GetManufacturerName;
+  GET_CPU_NAME           GetCpuName;
+  GET_ARM_MEM            GetArmMem;
+  GET_MODEL_INSTALLED_MB GetModelInstalledMB;
 } RASPBERRY_PI_FIRMWARE_PROTOCOL;
 
 extern EFI_GUID gRaspberryPiFirmwareProtocolGuid;
-- 
2.21.0.windows.1


  reply	other threads:[~2020-03-03 10:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-03 10:33 [edk2-devel][PATCH 0/5] Platform/RPi: User config improvements Pete Batard
2020-03-03 10:33 ` Pete Batard [this message]
2020-03-03 10:37   ` [edk2-devel][PATCH 1/5] Platform/RPi: Add firmware call to read installed memory size Ard Biesheuvel
2020-03-03 10:33 ` [edk2-devel][PATCH 2/5] Platform/RPi: Separate RAM descriptors between 0-3 GB and 3+ GB Pete Batard
2020-03-03 10:39   ` Ard Biesheuvel
2020-03-03 10:33 ` [edk2-devel][PATCH 3/5] Platform/RPi: Make 3GB/4GB a runtime (BIOS setup) choice Pete Batard
2020-03-03 10:42   ` Ard Biesheuvel
2020-03-03 10:33 ` [edk2-devel][PATCH 4/5] Platform/RPi: Make Device Tree provision " Pete Batard
2020-03-03 10:45   ` Ard Biesheuvel
2020-03-03 10:33 ` [edk2-devel][PATCH 5/5] Platform/RPi/ConfigDxe: Improve RPi configuration forms Pete Batard
2020-03-03 10:45   ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200303103339.7468-2-pete@akeo.ie \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox