From: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
To: devel@edk2.groups.io
Cc: leif@nuviainc.com, Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH v2 5/9] ArmPkg/ArmMmuLib AARCH64: cache-invalidate initial page table entries
Date: Wed, 4 Mar 2020 19:12:42 +0100 [thread overview]
Message-ID: <20200304181246.23513-6-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20200304181246.23513-1-ard.biesheuvel@linaro.org>
In the AARCH64 version of ArmMmuLib, we are currently relying on
set/way invalidation to ensure that the caches are in a consistent
state with respect to main memory once we turn the MMU on. Even if
set/way operations were the appropriate method to achieve this, doing
an invalidate-all first and then populating the page table entries
creates a window where page table entries could be loaded speculatively
into the caches before we modify them, and shadow the new values that
we write there.
So let's get rid of the blanket clean/invalidate operations, and
instead, update ArmUpdateTranslationTableEntry () to invalidate each
page table entry *after* it is written if the MMU is still disabled
at this point.
On ARMv8, it is guaranteed that memory accesses done by the page table
walker are cache coherent, and so we can ignore the case where the
MMU is on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
ArmPkg/Library/ArmLib/AArch64/ArmLibSupport.S | 9 ++++++++-
ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c | 9 ---------
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/ArmPkg/Library/ArmLib/AArch64/ArmLibSupport.S b/ArmPkg/Library/ArmLib/AArch64/ArmLibSupport.S
index 1adf960377a2..f744cd6738b9 100644
--- a/ArmPkg/Library/ArmLib/AArch64/ArmLibSupport.S
+++ b/ArmPkg/Library/ArmLib/AArch64/ArmLibSupport.S
@@ -13,6 +13,8 @@
.set DAIF_RD_FIQ_BIT, (1 << 6)
.set DAIF_RD_IRQ_BIT, (1 << 7)
+.set SCTLR_ELx_M_BIT_POS, (0)
+
ASM_FUNC(ArmReadMidr)
mrs x0, midr_el1 // Read from Main ID Register (MIDR)
ret
@@ -122,11 +124,16 @@ ASM_FUNC(ArmUpdateTranslationTableEntry)
lsr x1, x1, #12
EL1_OR_EL2_OR_EL3(x0)
1: tlbi vaae1, x1 // TLB Invalidate VA , EL1
+ mrs x2, sctlr_el1
b 4f
2: tlbi vae2, x1 // TLB Invalidate VA , EL2
+ mrs x2, sctlr_el2
b 4f
3: tlbi vae3, x1 // TLB Invalidate VA , EL3
-4: dsb nsh
+ mrs x2, sctlr_el3
+4: tbnz x2, SCTLR_ELx_M_BIT_POS, 5f
+ dc ivac, x0 // invalidate in Dcache if MMU is still off
+5: dsb nsh
isb
ret
diff --git a/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c b/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c
index e8f5c69e3136..204e33c75f95 100644
--- a/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c
+++ b/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c
@@ -699,15 +699,6 @@ ArmConfigureMmu (
ZeroMem (TranslationTable, RootTableEntryCount * sizeof(UINT64));
- // Disable MMU and caches. ArmDisableMmu() also invalidates the TLBs
- ArmDisableMmu ();
- ArmDisableDataCache ();
- ArmDisableInstructionCache ();
-
- // Make sure nothing sneaked into the cache
- ArmCleanInvalidateDataCache ();
- ArmInvalidateInstructionCache ();
-
TranslationTableAttribute = TT_ATTR_INDX_INVALID;
while (MemoryTable->Length != 0) {
--
2.17.1
next prev parent reply other threads:[~2020-03-04 18:13 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 18:12 [PATCH v2 0/9] ArmPkg: eradicate and deprecate by set/way cache ops Ard Biesheuvel
2020-03-04 18:12 ` [PATCH v2 1/9] ArmPlatformPkg/PrePi: replace set/way cache ops with by-VA ones Ard Biesheuvel
2020-03-05 16:23 ` Leif Lindholm
2020-03-04 18:12 ` [PATCH v2 2/9] ArmPkg/ArmMmuLib ARM: remove dummy constructor Ard Biesheuvel
2020-03-04 18:12 ` [PATCH v2 3/9] ArmPkg/ArmMmuLib ARM: split ArmMmuLibCore.c into core and update code Ard Biesheuvel
2020-03-04 18:12 ` [PATCH v2 4/9] ArmPkg/ArmMmuLib ARM: cache-invalidate initial page table entries Ard Biesheuvel
2020-03-04 18:12 ` Ard Biesheuvel [this message]
2020-03-04 18:12 ` [PATCH v2 6/9] ArmPkg/ArmLib: move set/way helper functions into private header Ard Biesheuvel
2020-03-04 18:12 ` [PATCH v2 7/9] ArmPkg/ArmLib: clean up library includes Ard Biesheuvel
2020-03-04 18:12 ` [PATCH v2 8/9] ArmPkg/ArmLib: remove bogus protocol declaration Ard Biesheuvel
2020-03-04 18:12 ` [PATCH v2 9/9] ArmPkg/ArmLib: ASSERT on set/way cache ops being used with MMU on Ard Biesheuvel
2020-03-05 16:29 ` [PATCH v2 0/9] ArmPkg: eradicate and deprecate by set/way cache ops Leif Lindholm
2020-03-05 21:40 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200304181246.23513-6-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox