From: "Liran Alon" <liran.alon@oracle.com>
To: devel@edk2.groups.io, lersek@redhat.com
Cc: nikita.leshchenko@oracle.com, aaron.young@oracle.com,
jordan.l.justen@intel.com, ard.biesheuvel@linaro.org,
Liran Alon <liran.alon@oracle.com>
Subject: [PATCH v2 06/17] OvmfPkg/PvScsiDxe: Report the number of targets and LUNs
Date: Wed, 25 Mar 2020 18:09:54 +0200 [thread overview]
Message-ID: <20200325161005.16743-7-liran.alon@oracle.com> (raw)
In-Reply-To: <20200325161005.16743-1-liran.alon@oracle.com>
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().
ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
---
OvmfPkg/OvmfPkg.dec | 9 +++
OvmfPkg/PvScsiDxe/PvScsi.c | 122 +++++++++++++++++++++++++++++++-
OvmfPkg/PvScsiDxe/PvScsi.h | 2 +
OvmfPkg/PvScsiDxe/PvScsiDxe.inf | 5 ++
4 files changed, 136 insertions(+), 2 deletions(-)
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index 4c5b6511cb97..a04aee5c2cd4 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -121,6 +121,15 @@
gUefiOvmfPkgTokenSpaceGuid.PcdVirtioScsiMaxTargetLimit|31|UINT16|6
gUefiOvmfPkgTokenSpaceGuid.PcdVirtioScsiMaxLunLimit|7|UINT32|7
+ ## Sets the *inclusive* number of targets and LUNs that PvScsi exposes for
+ # scan by ScsiBusDxe.
+ # As specified above for VirtioScsi, ScsiBusDxe scans all MaxTarget * MaxLun
+ # possible devices, which can take extremely long. Thus, the below constants
+ # are used so that scanning the number of devices given by their product
+ # is still acceptably fast.
+ gUefiOvmfPkgTokenSpaceGuid.PcdPvScsiMaxTargetLimit|64|UINT8|0x36
+ gUefiOvmfPkgTokenSpaceGuid.PcdPvScsiMaxLunLimit|0|UINT8|0x37
+
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogBase|0x0|UINT32|0x8
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogSize|0x0|UINT32|0x9
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize|0x0|UINT32|0xa
diff --git a/OvmfPkg/PvScsiDxe/PvScsi.c b/OvmfPkg/PvScsiDxe/PvScsi.c
index 04c08036b799..7f51ada19a1a 100644
--- a/OvmfPkg/PvScsiDxe/PvScsi.c
+++ b/OvmfPkg/PvScsiDxe/PvScsi.c
@@ -11,6 +11,7 @@
#include <IndustryStandard/Pci.h>
#include <IndustryStandard/PvScsi.h>
+#include <Library/BaseMemoryLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
@@ -25,6 +26,30 @@
//
#define PVSCSI_BINDING_VERSION 0x10
+//
+// Ext SCSI Pass Thru utilities
+//
+
+/**
+ Check if Target argument to EXT_SCSI_PASS_THRU.GetNextTarget() and
+ EXT_SCSI_PASS_THRU.GetNextTargetLun() is initialized
+**/
+STATIC
+BOOLEAN
+IsTargetInitialized (
+ IN UINT8 *Target
+ )
+{
+ UINTN Idx;
+
+ for (Idx = 0; Idx < TARGET_MAX_BYTES; ++Idx) {
+ if (Target[Idx] != 0xFF) {
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
//
// Ext SCSI Pass Thru
//
@@ -52,7 +77,54 @@ PvScsiGetNextTargetLun (
IN OUT UINT64 *Lun
)
{
- return EFI_UNSUPPORTED;
+ UINT8 *TargetPtr;
+ UINT8 LastTarget;
+ PVSCSI_DEV *Dev;
+
+ if (Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // The Target input parameter is unnecessarily a pointer-to-pointer
+ //
+ TargetPtr = *Target;
+
+ //
+ // If target not initialized, return first target & LUN
+ //
+ if (!IsTargetInitialized (TargetPtr)) {
+ ZeroMem (TargetPtr, TARGET_MAX_BYTES);
+ *Lun = 0;
+ return EFI_SUCCESS;
+ }
+
+ //
+ // We only use first byte of target identifer
+ //
+ LastTarget = *TargetPtr;
+
+ //
+ // Increment (target, LUN) pair if valid on input
+ //
+ Dev = PVSCSI_FROM_PASS_THRU (This);
+ if (LastTarget > Dev->MaxTarget || *Lun > Dev->MaxLun) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*Lun < Dev->MaxLun) {
+ ++*Lun;
+ return EFI_SUCCESS;
+ }
+
+ if (LastTarget < Dev->MaxTarget) {
+ *Lun = 0;
+ ++LastTarget;
+ *TargetPtr = LastTarget;
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_FOUND;
}
STATIC
@@ -111,7 +183,47 @@ PvScsiGetNextTarget (
IN OUT UINT8 **Target
)
{
- return EFI_UNSUPPORTED;
+ UINT8 *TargetPtr;
+ UINT8 LastTarget;
+ PVSCSI_DEV *Dev;
+
+ if (Target == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // The Target input parameter is unnecessarily a pointer-to-pointer
+ //
+ TargetPtr = *Target;
+
+ //
+ // If target not initialized, return first target
+ //
+ if (!IsTargetInitialized (TargetPtr)) {
+ ZeroMem (TargetPtr, TARGET_MAX_BYTES);
+ return EFI_SUCCESS;
+ }
+
+ //
+ // We only use first byte of target identifer
+ //
+ LastTarget = *TargetPtr;
+
+ //
+ // Increment target if valid on input
+ //
+ Dev = PVSCSI_FROM_PASS_THRU (This);
+ if (LastTarget > Dev->MaxTarget) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (LastTarget < Dev->MaxTarget) {
+ ++LastTarget;
+ *TargetPtr = LastTarget;
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_FOUND;
}
STATIC
@@ -120,6 +232,12 @@ PvScsiInit (
IN OUT PVSCSI_DEV *Dev
)
{
+ //
+ // Init configuration
+ //
+ Dev->MaxTarget = PcdGet8 (PcdPvScsiMaxTargetLimit);
+ Dev->MaxLun = PcdGet8 (PcdPvScsiMaxLunLimit);
+
//
// Populate the exported interface's attributes
//
diff --git a/OvmfPkg/PvScsiDxe/PvScsi.h b/OvmfPkg/PvScsiDxe/PvScsi.h
index 3940b4c20019..dd3e0c68e6da 100644
--- a/OvmfPkg/PvScsiDxe/PvScsi.h
+++ b/OvmfPkg/PvScsiDxe/PvScsi.h
@@ -19,6 +19,8 @@
typedef struct {
UINT32 Signature;
+ UINT8 MaxTarget;
+ UINT8 MaxLun;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL PassThru;
EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
} PVSCSI_DEV;
diff --git a/OvmfPkg/PvScsiDxe/PvScsiDxe.inf b/OvmfPkg/PvScsiDxe/PvScsiDxe.inf
index f4d452c6c3d2..fcffc90d46c8 100644
--- a/OvmfPkg/PvScsiDxe/PvScsiDxe.inf
+++ b/OvmfPkg/PvScsiDxe/PvScsiDxe.inf
@@ -26,6 +26,7 @@
OvmfPkg/OvmfPkg.dec
[LibraryClasses]
+ BaseMemoryLib
DebugLib
MemoryAllocationLib
UefiBootServicesTableLib
@@ -35,3 +36,7 @@
[Protocols]
gEfiExtScsiPassThruProtocolGuid ## BY_START
gEfiPciIoProtocolGuid ## TO_START
+
+[Pcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdPvScsiMaxLunLimit ## CONSUMES
+ gUefiOvmfPkgTokenSpaceGuid.PcdPvScsiMaxTargetLimit ## CONSUMES
--
2.20.1
next prev parent reply other threads:[~2020-03-25 16:07 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 16:09 [PATCH v2 00/17] OvmfPkg: Support booting from VMware PVSCSI controller Liran Alon
2020-03-25 16:09 ` [PATCH v2 01/17] OvmfPkg/PvScsiDxe: Create empty driver Liran Alon
2020-03-26 14:44 ` [edk2-devel] " Laszlo Ersek
2020-03-25 16:09 ` [PATCH v2 02/17] OvmfPkg/PvScsiDxe: Install DriverBinding protocol Liran Alon
2020-03-25 16:09 ` [PATCH v2 03/17] OvmfPkg/PvScsiDxe: Report name of driver Liran Alon
2020-03-25 16:09 ` [PATCH v2 04/17] OvmfPkg/PvScsiDxe: Probe PCI devices and look for PvScsi Liran Alon
2020-03-25 16:09 ` [PATCH v2 05/17] OvmfPkg/PvScsiDxe: Install stubbed EXT_SCSI_PASS_THRU Liran Alon
2020-03-25 16:09 ` Liran Alon [this message]
2020-03-25 16:09 ` [PATCH v2 07/17] OvmfPkg/PvScsiDxe: Translate Target & LUN to/from DevicePath Liran Alon
2020-03-25 16:09 ` [PATCH v2 08/17] OvmfPkg/PvScsiDxe: Open PciIo protocol for later use Liran Alon
2020-03-25 16:09 ` [PATCH v2 09/17] OvmfPkg/PvScsiDxe: Backup/Restore PCI attributes on Init/UnInit Liran Alon
2020-03-26 17:04 ` [edk2-devel] " Laszlo Ersek
2020-03-25 16:09 ` [PATCH v2 10/17] OvmfPkg/PvScsiDxe: Enable MMIO-Space & Bus-Mastering in PCI attributes Liran Alon
2020-03-26 17:12 ` Laszlo Ersek
2020-03-25 16:09 ` [PATCH v2 11/17] OvmfPkg/PvScsiDxe: Define device interface structures and constants Liran Alon
2020-03-26 17:19 ` [edk2-devel] " Laszlo Ersek
2020-03-25 16:10 ` [PATCH v2 12/17] OvmfPkg/PvScsiDxe: Reset adapter on init Liran Alon
2020-03-26 18:25 ` [edk2-devel] " Laszlo Ersek
2020-03-25 16:10 ` [PATCH v2 13/17] OvmfPkg/PvScsiDxe: Setup requests and completions rings Liran Alon
2020-03-26 20:51 ` Laszlo Ersek
2020-03-25 16:10 ` [PATCH v2 14/17] OvmfPkg/PvScsiDxe: Introduce DMA communication buffer Liran Alon
2020-03-26 22:17 ` Laszlo Ersek
2020-03-27 0:05 ` Liran Alon
2020-03-27 13:35 ` Laszlo Ersek
2020-03-27 21:31 ` Liran Alon
2020-03-30 11:29 ` Laszlo Ersek
2020-03-25 16:10 ` [PATCH v2 15/17] OvmfPkg/PvScsiDxe: Support sending SCSI request and receive response Liran Alon
2020-03-27 11:26 ` [edk2-devel] " Laszlo Ersek
2020-03-27 13:04 ` Liran Alon
2020-03-27 13:20 ` Liran Alon
2020-03-27 21:05 ` Laszlo Ersek
2020-03-27 21:05 ` Laszlo Ersek
2020-03-27 22:04 ` Liran Alon
2020-03-27 22:17 ` Liran Alon
2020-03-28 19:18 ` Liran Alon
2020-03-30 11:23 ` Laszlo Ersek
2020-03-30 11:12 ` Laszlo Ersek
2020-03-30 10:30 ` Laszlo Ersek
2020-03-25 16:10 ` [PATCH v2 16/17] OvmfPkg/PvScsiDxe: Reset device on ExitBootServices() Liran Alon
2020-03-25 16:10 ` [PATCH v2 17/17] OvmfPkg/PvScsiDxe: Enable device 64-bit DMA addresses Liran Alon
2020-03-26 22:29 ` [edk2-devel] " Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325161005.16743-7-liran.alon@oracle.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox