From: "Liran Alon" <liran.alon@oracle.com>
To: devel@edk2.groups.io, lersek@redhat.com
Cc: nikita.leshchenko@oracle.com, aaron.young@oracle.com,
jordan.l.justen@intel.com, ard.biesheuvel@linaro.org,
Liran Alon <liran.alon@oracle.com>
Subject: [PATCH v3 05/17] OvmfPkg/PvScsiDxe: Install stubbed EXT_SCSI_PASS_THRU
Date: Sat, 28 Mar 2020 23:00:48 +0300 [thread overview]
Message-ID: <20200328200100.60786-6-liran.alon@oracle.com> (raw)
In-Reply-To: <20200328200100.60786-1-liran.alon@oracle.com>
Support dynamic insertion and removal of the protocol.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
---
OvmfPkg/PvScsiDxe/PvScsi.c | 209 +++++++++++++++++++++++++++++++-
OvmfPkg/PvScsiDxe/PvScsi.h | 29 +++++
OvmfPkg/PvScsiDxe/PvScsiDxe.inf | 6 +-
3 files changed, 241 insertions(+), 3 deletions(-)
create mode 100644 OvmfPkg/PvScsiDxe/PvScsi.h
diff --git a/OvmfPkg/PvScsiDxe/PvScsi.c b/OvmfPkg/PvScsiDxe/PvScsi.c
index 9923a31d25d7..04c08036b799 100644
--- a/OvmfPkg/PvScsiDxe/PvScsi.c
+++ b/OvmfPkg/PvScsiDxe/PvScsi.c
@@ -11,17 +11,156 @@
#include <IndustryStandard/Pci.h>
#include <IndustryStandard/PvScsi.h>
+#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Protocol/PciIo.h>
#include <Uefi/UefiSpec.h>
+#include "PvScsi.h"
+
//
// Higher versions will be used before lower, 0x10-0xffffffef is the version
// range for IHV (Indie Hardware Vendors)
//
#define PVSCSI_BINDING_VERSION 0x10
+//
+// Ext SCSI Pass Thru
+//
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiPassThru (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiGetNextTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target,
+ IN OUT UINT64 *Lun
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiBuildDevicePath (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiGetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 **Target,
+ OUT UINT64 *Lun
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiResetChannel (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiResetTargetLun (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN UINT8 *Target,
+ IN UINT64 Lun
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+PvScsiGetNextTarget (
+ IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 **Target
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+EFI_STATUS
+PvScsiInit (
+ IN OUT PVSCSI_DEV *Dev
+ )
+{
+ //
+ // Populate the exported interface's attributes
+ //
+ Dev->PassThru.Mode = &Dev->PassThruMode;
+ Dev->PassThru.PassThru = &PvScsiPassThru;
+ Dev->PassThru.GetNextTargetLun = &PvScsiGetNextTargetLun;
+ Dev->PassThru.BuildDevicePath = &PvScsiBuildDevicePath;
+ Dev->PassThru.GetTargetLun = &PvScsiGetTargetLun;
+ Dev->PassThru.ResetChannel = &PvScsiResetChannel;
+ Dev->PassThru.ResetTargetLun = &PvScsiResetTargetLun;
+ Dev->PassThru.GetNextTarget = &PvScsiGetNextTarget;
+
+ //
+ // AdapterId is a target for which no handle will be created during bus scan.
+ // Prevent any conflict with real devices.
+ //
+ Dev->PassThruMode.AdapterId = MAX_UINT32;
+
+ //
+ // Set both physical and logical attributes for non-RAID SCSI channel
+ //
+ Dev->PassThruMode.Attributes = EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL |
+ EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL;
+
+ //
+ // No restriction on transfer buffer alignment
+ //
+ Dev->PassThruMode.IoAlign = 0;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+VOID
+PvScsiUninit (
+ IN OUT PVSCSI_DEV *Dev
+ )
+{
+ // Currently nothing to do here
+}
+
//
// Driver Binding
//
@@ -90,7 +229,42 @@ PvScsiDriverBindingStart (
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
)
{
- return EFI_UNSUPPORTED;
+ PVSCSI_DEV *Dev;
+ EFI_STATUS Status;
+
+ Dev = (PVSCSI_DEV *) AllocateZeroPool (sizeof (*Dev));
+ if (Dev == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = PvScsiInit (Dev);
+ if (EFI_ERROR (Status)) {
+ goto FreePvScsi;
+ }
+
+ //
+ // Setup complete, attempt to export the driver instance's PassThru interface
+ //
+ Dev->Signature = PVSCSI_SIG;
+ Status = gBS->InstallProtocolInterface (
+ &ControllerHandle,
+ &gEfiExtScsiPassThruProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &Dev->PassThru
+ );
+ if (EFI_ERROR (Status)) {
+ goto UninitDev;
+ }
+
+ return EFI_SUCCESS;
+
+UninitDev:
+ PvScsiUninit (Dev);
+
+FreePvScsi:
+ FreePool (Dev);
+
+ return Status;
}
STATIC
@@ -103,7 +277,38 @@ PvScsiDriverBindingStop (
IN EFI_HANDLE *ChildHandleBuffer
)
{
- return EFI_UNSUPPORTED;
+ EFI_STATUS Status;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL *PassThru;
+ PVSCSI_DEV *Dev;
+
+ Status = gBS->OpenProtocol (
+ ControllerHandle,
+ &gEfiExtScsiPassThruProtocolGuid,
+ (VOID **)&PassThru,
+ This->DriverBindingHandle,
+ ControllerHandle,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL // Lookup only
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Dev = PVSCSI_FROM_PASS_THRU (PassThru);
+
+ Status = gBS->UninstallProtocolInterface (
+ ControllerHandle,
+ &gEfiExtScsiPassThruProtocolGuid,
+ &Dev->PassThru
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PvScsiUninit (Dev);
+
+ FreePool (Dev);
+
+ return EFI_SUCCESS;
}
STATIC EFI_DRIVER_BINDING_PROTOCOL mPvScsiDriverBinding = {
diff --git a/OvmfPkg/PvScsiDxe/PvScsi.h b/OvmfPkg/PvScsiDxe/PvScsi.h
new file mode 100644
index 000000000000..3940b4c20019
--- /dev/null
+++ b/OvmfPkg/PvScsiDxe/PvScsi.h
@@ -0,0 +1,29 @@
+/** @file
+
+ Internal definitions for the PVSCSI driver, which produces Extended SCSI
+ Pass Thru Protocol instances for pvscsi devices.
+
+ Copyright (C) 2020, Oracle and/or its affiliates.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __PVSCSI_DXE_H_
+#define __PVSCSI_DXE_H_
+
+#include <Library/DebugLib.h>
+#include <Protocol/ScsiPassThruExt.h>
+
+#define PVSCSI_SIG SIGNATURE_32 ('P', 'S', 'C', 'S')
+
+typedef struct {
+ UINT32 Signature;
+ EFI_EXT_SCSI_PASS_THRU_PROTOCOL PassThru;
+ EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
+} PVSCSI_DEV;
+
+#define PVSCSI_FROM_PASS_THRU(PassThruPointer) \
+ CR (PassThruPointer, PVSCSI_DEV, PassThru, PVSCSI_SIG)
+
+#endif // __PVSCSI_DXE_H_
diff --git a/OvmfPkg/PvScsiDxe/PvScsiDxe.inf b/OvmfPkg/PvScsiDxe/PvScsiDxe.inf
index c1f0663832ed..f4d452c6c3d2 100644
--- a/OvmfPkg/PvScsiDxe/PvScsiDxe.inf
+++ b/OvmfPkg/PvScsiDxe/PvScsiDxe.inf
@@ -19,15 +19,19 @@
[Sources]
PvScsi.c
+ PvScsi.h
[Packages]
MdePkg/MdePkg.dec
OvmfPkg/OvmfPkg.dec
[LibraryClasses]
+ DebugLib
+ MemoryAllocationLib
UefiBootServicesTableLib
UefiDriverEntryPoint
UefiLib
[Protocols]
- gEfiPciIoProtocolGuid ## TO_START
+ gEfiExtScsiPassThruProtocolGuid ## BY_START
+ gEfiPciIoProtocolGuid ## TO_START
--
2.20.1
next prev parent reply other threads:[~2020-03-28 19:58 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-28 20:00 [PATCH v3 00/17] OvmfPkg: Support booting from VMware PVSCSI controller Liran Alon
2020-03-28 20:00 ` [PATCH v3 01/17] OvmfPkg/PvScsiDxe: Create empty driver Liran Alon
2020-03-28 20:00 ` [PATCH v3 02/17] OvmfPkg/PvScsiDxe: Install DriverBinding protocol Liran Alon
2020-03-28 20:00 ` [PATCH v3 03/17] OvmfPkg/PvScsiDxe: Report name of driver Liran Alon
2020-03-28 20:00 ` [PATCH v3 04/17] OvmfPkg/PvScsiDxe: Probe PCI devices and look for PvScsi Liran Alon
2020-03-28 20:00 ` Liran Alon [this message]
2020-03-28 20:00 ` [PATCH v3 06/17] OvmfPkg/PvScsiDxe: Report the number of targets and LUNs Liran Alon
2020-03-28 20:00 ` [PATCH v3 07/17] OvmfPkg/PvScsiDxe: Translate Target & LUN to/from DevicePath Liran Alon
2020-03-28 20:00 ` [PATCH v3 08/17] OvmfPkg/PvScsiDxe: Open PciIo protocol for later use Liran Alon
2020-03-28 20:00 ` [PATCH v3 09/17] OvmfPkg/PvScsiDxe: Backup/Restore PCI attributes on Init/UnInit Liran Alon
2020-03-28 20:00 ` [PATCH v3 10/17] OvmfPkg/PvScsiDxe: Enable MMIO-Space & Bus-Mastering in PCI attributes Liran Alon
2020-03-28 20:00 ` [PATCH v3 11/17] OvmfPkg/PvScsiDxe: Define device interface structures and constants Liran Alon
2020-03-28 20:00 ` [PATCH v3 12/17] OvmfPkg/PvScsiDxe: Reset adapter on init Liran Alon
2020-03-30 15:19 ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 13/17] OvmfPkg/PvScsiDxe: Setup requests and completions rings Liran Alon
2020-03-30 15:54 ` [edk2-devel] " Laszlo Ersek
2020-03-30 17:24 ` Liran Alon
2020-03-30 20:46 ` Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 14/17] OvmfPkg/PvScsiDxe: Introduce DMA communication buffer Liran Alon
2020-03-30 16:06 ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 15/17] OvmfPkg/PvScsiDxe: Support sending SCSI request and receive response Liran Alon
2020-03-30 16:22 ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 16/17] OvmfPkg/PvScsiDxe: Reset device on ExitBootServices() Liran Alon
2020-03-30 16:23 ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:01 ` [PATCH v3 17/17] OvmfPkg/PvScsiDxe: Enable device 64-bit DMA addresses Liran Alon
2020-03-29 9:29 ` [PATCH v3 00/17] OvmfPkg: Support booting from VMware PVSCSI controller Nikita Leshenko
2020-03-30 16:53 ` [edk2-devel] " Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200328200100.60786-6-liran.alon@oracle.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox