* [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform
@ 2020-04-15 12:13 Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib Pankaj Bansal
` (24 more replies)
0 siblings, 25 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
This patch series adds PEI phase to NXP LS1043ARDB Platform.
V2 series can be referred here:
https://edk2.groups.io/g/devel/message/56009
I have taken care of the review comments received on v2 and have
removed/added these commits w.r.t V2:
Removed in V3 (present in V2):
07/28 Silicon/NXP: Implement SerialUartClockLib
08/28 Silicon/NXP/LS1043A: Use BaseSerialPortLib16550 as SerialPortLib
09/28 Silicon/NXP: Drop DUartPortLib
These commits have been dropped for now. the discussion in ongoing for
using BaseSerialPortLib16550 @ https://edk2.groups.io/g/devel/message/54629
Once that discussion is concluded, i can submit these patches.
21/28 Slicon/NXP: Add PlatformPei Lib
as per discussion on https://edk2.groups.io/g/devel/message/56015
i am dropping this commit for now. when i submit the patches to print more
info about SOC, i can submit this patch with those.
23/28 NXP/LS1043aRdbPkg/ArmPlatformLib: Use Allocate pool
discussion ongoing @ https://edk2.groups.io/g/devel/message/56019
Once that discussion is concluded, i can submit this patch.
Added in V3 (not present in V2)
15/24 Silicon: NXP: Remove direct calls to SwapMmio* APIs
Added as per comments @ https://edk2.groups.io/g/devel/message/56012
Pankaj Bansal (24):
Silicon/NXP: Add I2c lib
Silicon/NXP: changes to use I2clib in i2cdxe
Silicon/NXP/I2cDxe: Fix I2c Timeout with RTC
Silicon/Maxim: Fix bug in RtcWrite in Ds1307RtcLib
Silicon/Maxim: Add comments in Ds1307RtcLib
NXP/LS1043aRdb: Move Soc specific components to soc files
Silicon/NXP: remove print information from Soc lib
Silicon/NXP: remove not needed components
Silicon/NXP: Remove unnecessary PCDs
Silicon/NXP: Move dsc file
Platform/NXP: rename the ArmPlatformLib as per ArmPlatformPkg
Silicon/NXP: Move RAM retrieval from SocLib
Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs
Silicon/NXP: Use Clock retrieval PPI in modules
Silicon: NXP: Remove direct calls to SwapMmio* APIs
Silicon/NXP: Add Chassis2 Package
Silicon/NXP/LS1043A: Use ChassisLib from Chassis2 Pkg
Silicon/NXP/LS1043A: Move SocLib to Soc Package
NXP/LS1043aRdbPkg/ArmPlatformLib: Remove extern SocInit
NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg
Platform/NXP: Use FV rules from ArmVirtPkg
Platform/NXP/LS1043aRdbPkg: Add VarStore
Silicon/NXP: move MemoryInitPeiLib as per PEIM structures
Platform/NXP/LS1043aRdbPkg: Add PEI Phase
Silicon/NXP/Chassis2/Chassis2.dec | 23 +
Silicon/NXP/NxpQoriqLs.dec | 95 +--
Silicon/NXP/Chassis2/Chassis2.dsc.inc | 10 +
Silicon/NXP/LS1043A/LS1043A.dsc.inc | 48 +-
{Platform => Silicon}/NXP/NxpQoriqLs.dsc.inc | 71 ++-
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 26 +-
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf | 21 +-
.../Drivers/PlatformDxe/PlatformDxe.inf | 11 +-
.../Library/ArmPlatformLib/ArmPlatformLib.inf | 41 ++
.../Library/PlatformLib/ArmPlatformLib.inf | 55 --
.../Library/ChassisLib/ChassisLib.inf | 34 +
Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 14 +-
Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf | 27 +
.../NXP/Library/DUartPortLib/DUartPortLib.inf | 5 +-
Silicon/NXP/Library/I2cLib/I2cLib.inf | 31 +
.../MemoryInitPeiLib.inf | 10 +-
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 45 --
Silicon/NXP/Chassis2/Include/Chassis.h | 34 +
Silicon/NXP/Drivers/I2cDxe/I2cDxe.h | 50 +-
Silicon/NXP/Include/Chassis2/LsSerDes.h | 62 --
Silicon/NXP/Include/Chassis2/NxpSoc.h | 361 -----------
Silicon/NXP/Include/DramInfo.h | 38 --
Silicon/NXP/Include/Library/ChassisLib.h | 51 ++
Silicon/NXP/Include/Library/I2cLib.h | 120 ++++
Silicon/NXP/Include/Library/IoAccessLib.h | 236 +------
Silicon/NXP/Include/Library/SocLib.h | 52 ++
Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h | 53 ++
Silicon/NXP/LS1043A/Include/Soc.h | 55 ++
Silicon/NXP/LS1043A/Include/SocSerDes.h | 51 --
Silicon/NXP/Library/DUartPortLib/DUart.h | 8 +-
Silicon/NXP/Library/I2cLib/I2cLibInternal.h | 105 ++++
.../MemoryInitPeiLib/MemoryInitPeiLib.h | 25 +
Silicon/NXP/Library/SocLib/NxpChassis.h | 136 ----
.../Drivers/PlatformDxe/PlatformDxe.c | 15 +-
.../ArmPlatformLib.c | 61 +-
.../ArmPlatformLibMem.c} | 79 ++-
.../Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c | 23 +-
.../Chassis2/Library/ChassisLib/ChassisLib.c | 97 +++
Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 533 +---------------
Silicon/NXP/LS1043A/Library/SocLib/SocLib.c | 77 +++
.../NXP/Library/DUartPortLib/DUartPortLib.c | 7 +-
Silicon/NXP/Library/I2cLib/I2cLib.c | 589 ++++++++++++++++++
Silicon/NXP/Library/IoAccessLib/IoAccessLib.c | 17 +-
.../Library/MemoryInitPei/MemoryInitPeiLib.c | 140 -----
.../MemoryInitPeiLib/MemoryInitPeiLib.c | 267 ++++++++
Silicon/NXP/Library/SocLib/Chassis.c | 495 ---------------
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 162 -----
Silicon/NXP/Library/SocLib/SerDes.c | 268 --------
Platform/NXP/FVRules.fdf.inc | 59 +-
.../AArch64/ArmPlatformHelper.S | 45 ++
.../Library/PlatformLib/NxpQoriqLsHelper.S | 31 -
Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc | 91 +++
52 files changed, 2131 insertions(+), 2929 deletions(-)
create mode 100644 Silicon/NXP/Chassis2/Chassis2.dec
create mode 100644 Silicon/NXP/Chassis2/Chassis2.dsc.inc
rename {Platform => Silicon}/NXP/NxpQoriqLs.dsc.inc (85%)
create mode 100644 Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
delete mode 100644 Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
create mode 100644 Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
create mode 100644 Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf
create mode 100644 Silicon/NXP/Library/I2cLib/I2cLib.inf
rename Silicon/NXP/Library/{MemoryInitPei => MemoryInitPeiLib}/MemoryInitPeiLib.inf (74%)
delete mode 100644 Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
create mode 100644 Silicon/NXP/Chassis2/Include/Chassis.h
delete mode 100644 Silicon/NXP/Include/Chassis2/LsSerDes.h
delete mode 100644 Silicon/NXP/Include/Chassis2/NxpSoc.h
delete mode 100644 Silicon/NXP/Include/DramInfo.h
create mode 100644 Silicon/NXP/Include/Library/ChassisLib.h
create mode 100644 Silicon/NXP/Include/Library/I2cLib.h
create mode 100644 Silicon/NXP/Include/Library/SocLib.h
create mode 100644 Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h
create mode 100644 Silicon/NXP/LS1043A/Include/Soc.h
delete mode 100644 Silicon/NXP/LS1043A/Include/SocSerDes.h
create mode 100644 Silicon/NXP/Library/I2cLib/I2cLibInternal.h
create mode 100644 Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.h
delete mode 100644 Silicon/NXP/Library/SocLib/NxpChassis.h
rename Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib => ArmPlatformLib}/ArmPlatformLib.c (51%)
rename Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib/NxpQoriqLsMem.c => ArmPlatformLib/ArmPlatformLibMem.c} (54%)
create mode 100644 Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c
create mode 100644 Silicon/NXP/LS1043A/Library/SocLib/SocLib.c
create mode 100644 Silicon/NXP/Library/I2cLib/I2cLib.c
delete mode 100644 Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
create mode 100644 Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
delete mode 100644 Silicon/NXP/Library/SocLib/Chassis.c
delete mode 100644 Silicon/NXP/Library/SocLib/Chassis2/Soc.c
delete mode 100644 Silicon/NXP/Library/SocLib/SerDes.c
create mode 100644 Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
delete mode 100644 Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsHelper.S
create mode 100644 Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc
--
2.17.1
^ permalink raw reply [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-22 16:38 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 02/24] Silicon/NXP: changes to use I2clib in i2cdxe Pankaj Bansal
` (23 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
I2c lib is going to be used in PrePeiCore sec module to get the
System clock information from devices connected to i2c (like fpga
or clock generator)
since we don't have support of DXE modules this early in boot stage,
move the i2c controller functionality in library.
This I2cLib is not bug fix over I2cDxe.
The I2cLib has been completely re-written and not code movement from
I2cDxe to I2cLib
This is because I2cDxe has been written assuming that the I2c transaction
would always be of minimum two operations.
But this may not be the case always. e.g. RTC write in PCF2129 is single
operation.
Also the I2cDxe driver doesn't generate repeat start if i2c transaction is
more than two operations, it generates stop. This violates PI I2C spec.
Now we have removed these assumptions as well as added repeat start
between successive operations, which comply with PI I2C spec.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- moved I2cLib addition in NxpQoriqLs.dsc.inc to PATCH 2
- Added Qoriq Layerscape in description of CLOCK_DIVISOR_PAIR
- ERRXXXXXX -> A-XXXXXX
- Added u-boot patch reference to errata workaround description
- Added Glossary and Revision Reference in file header
- Dividor -> divider
- Added explaination before calling I2cErratumA009203
- PtrAddress -> AddressPtr
- Update commit description
Silicon/NXP/NxpQoriqLs.dec | 10 +-
Silicon/NXP/Library/I2cLib/I2cLib.inf | 31 ++
Silicon/NXP/Include/Library/I2cLib.h | 120 ++++
Silicon/NXP/Library/I2cLib/I2cLibInternal.h | 105 ++++
Silicon/NXP/Library/I2cLib/I2cLib.c | 589 ++++++++++++++++++++
5 files changed, 854 insertions(+), 1 deletion(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index 764b9bb0e2d3..4a1cfb3e278e 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -1,6 +1,6 @@
# @file.
#
-# Copyright 2017-2019 NXP
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -13,6 +13,10 @@
[Includes]
Include
+[LibraryClasses]
+ ## @libraryclass Provides services to read/write to I2c devices
+ I2cLib|Include/Library/I2cLib.h
+
[Guids.common]
gNxpQoriqLsTokenSpaceGuid = {0x98657342, 0x4aee, 0x4fc6, {0xbc, 0xb5, 0xff, 0x45, 0xb7, 0xa8, 0x71, 0xf2}}
gNxpNonDiscoverableI2cMasterGuid = { 0x5f2c099c, 0x54a3, 0x4dd4, {0x9e, 0xc5, 0xe9, 0x12, 0x8c, 0x36, 0x81, 0x6a}}
@@ -101,3 +105,7 @@
gNxpQoriqLsTokenSpaceGuid.PcdPciLutBigEndian|FALSE|BOOLEAN|0x00000312
gNxpQoriqLsTokenSpaceGuid.PcdWatchdogBigEndian|FALSE|BOOLEAN|0x00000313
gNxpQoriqLsTokenSpaceGuid.PcdIfcBigEndian|FALSE|BOOLEAN|0x00000314
+
+[PcdsFeatureFlag]
+ gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203|FALSE|BOOLEAN|0x00000315
+
diff --git a/Silicon/NXP/Library/I2cLib/I2cLib.inf b/Silicon/NXP/Library/I2cLib/I2cLib.inf
new file mode 100644
index 000000000000..b9bd79ac1ef1
--- /dev/null
+++ b/Silicon/NXP/Library/I2cLib/I2cLib.inf
@@ -0,0 +1,31 @@
+# @file
+#
+# Component description file for I2cLib module
+# Copyright 2017, 2020 NXP
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = I2cLib
+ FILE_GUID = 8ecefc8f-a2c4-4091-b81f-20f7aeb0567f
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = I2cLib
+
+[Sources.common]
+ I2cLib.c
+
+[LibraryClasses]
+ IoLib
+ TimerLib
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Silicon/NXP/NxpQoriqLs.dec
+
+[FeaturePcd]
+ gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203
+
diff --git a/Silicon/NXP/Include/Library/I2cLib.h b/Silicon/NXP/Include/Library/I2cLib.h
new file mode 100644
index 000000000000..e39237abd3ee
--- /dev/null
+++ b/Silicon/NXP/Include/Library/I2cLib.h
@@ -0,0 +1,120 @@
+/** @file
+ I2c Lib to control I2c controller.
+
+ Copyright 2020 NXP
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef I2C_LIB_H__
+#define I2C_LIB_H__
+
+#include <Uefi.h>
+#include <Pi/PiI2c.h>
+
+/**
+ software reset of the entire I2C module.
+ The module is reset and disabled.
+ Status register fields (IBSR) are cleared.
+
+ @param[in] Base Base Address of I2c controller's registers
+
+ @return EFI_SUCCESS successfuly reset the I2c module
+**/
+EFI_STATUS
+I2cReset (
+ IN UINTN Base
+ );
+
+/**
+ Early init I2C for reading the sysclk from I2c slave device.
+ I2c bus clock is determined from the clock input to I2c controller.
+ The clock input to I2c controller is derived from the sysclk.
+ sysclk is determined by clock generator, which is controller by i2c.
+
+ So, it's a chicken-egg problem to read the sysclk from clock generator.
+ To break this cycle (i.e. to read the sysclk), we setup the i2c bus clock to
+ lowest value, in the hope that it won't be out of clock generator's supported
+ i2c clock frequency. Once we have the correct sysclk, we can setup the
+ correct i2c bus clock.
+
+ @param[in] Base Base Address of I2c controller's registers
+
+ @return EFI_SUCCESS successfuly setup the i2c bus for reading sysclk
+**/
+EFI_STATUS
+I2cEarlyInitialize (
+ IN UINTN Base
+ );
+
+/**
+ Configure I2c bus to operate at a given speed
+
+ @param[in] Base Base Address of I2c controller's registers
+ @param[in] I2cBusClock Input clock to I2c controller
+ @param[in] Speed speed to be configured for I2c bus
+
+ @return EFI_SUCCESS successfuly setup the i2c bus
+**/
+EFI_STATUS
+I2cInitialize (
+ IN UINTN Base,
+ IN UINT64 I2cBusClock,
+ IN UINT64 Speed
+ );
+
+/**
+ Transfer data to/from I2c slave device
+
+ @param[in] Base Base Address of I2c controller's registers
+ @param[in] SlaveAddress Slave Address from which data is to be read
+ @param[in] RequestPacket Pointer to an EFI_I2C_REQUEST_PACKET structure
+ describing the I2C transaction
+
+ @return EFI_SUCCESS successfuly transfer the data
+ @return EFI_DEVICE_ERROR There was an error while transferring data through
+ I2c bus
+ @return EFI_NO_RESPONSE There was no Ack from i2c device
+ @return EFI_TIMEOUT I2c Bus is busy
+ @return EFI_NOT_READY I2c Bus Arbitration lost
+**/
+EFI_STATUS
+I2cBusXfer (
+ IN UINTN Base,
+ IN UINT32 SlaveAddress,
+ IN EFI_I2C_REQUEST_PACKET *RequestPacket
+ );
+
+/**
+ Read a register from I2c slave device. This API is wrapper around I2cBusXfer
+
+ @param[in] Base Base Address of I2c controller's registers
+ @param[in] SlaveAddress Slave Address from which register value is
+ to be read
+ @param[in] RegAddress Register Address in Slave's memory map
+ @param[in] RegAddressWidthInBytes Number of bytes in RegAddress to send to
+ I2c Slave for simple reads without any
+ register, make this value = 0
+ (RegAddress is don't care in that case)
+ @param[out] RegValue Value to be read from I2c slave's regiser
+ @param[in] RegValueNumBytes Number of bytes to read from I2c slave
+ register
+
+ @return EFI_SUCCESS successfuly read the registers
+ @return EFI_DEVICE_ERROR There was an error while transferring data through
+ I2c bus
+ @return EFI_NO_RESPONSE There was no Ack from i2c device
+ @return EFI_TIMEOUT I2c Bus is busy
+ @return EFI_NOT_READY I2c Bus Arbitration lost
+**/
+EFI_STATUS
+I2cBusReadReg (
+ IN UINTN Base,
+ IN UINT32 SlaveAddress,
+ IN UINT64 RegAddress,
+ IN UINT8 RegAddressWidthInBytes,
+ OUT UINT8 *RegValue,
+ IN UINT32 RegValueNumBytes
+ );
+
+#endif // I2C_LIB_H__
diff --git a/Silicon/NXP/Library/I2cLib/I2cLibInternal.h b/Silicon/NXP/Library/I2cLib/I2cLibInternal.h
new file mode 100644
index 000000000000..2ca4a3639d2c
--- /dev/null
+++ b/Silicon/NXP/Library/I2cLib/I2cLibInternal.h
@@ -0,0 +1,105 @@
+/** @file
+ I2c Lib to control I2c controller.
+
+ Copyright 2020 NXP
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef I2C_LIB_INTERNAL_H__
+#define I2C_LIB_INTERNAL_H__
+
+#include <Pi/PiI2c.h>
+#include <Uefi.h>
+
+/** Module Disable
+ 0b - The module is enabled. You must clear this field before any other IBCR
+ fields have any effect.
+ 1b - The module is reset and disabled. This is the power-on reset situation.
+ When high, the interface is held in reset, but registers can still be
+ accessed. Status register fields (IBSR) are not valid when the module
+ is disabled.
+**/
+#define I2C_IBCR_MDIS BIT7
+// I2c Bus Interrupt Enable
+#define I2C_IBCR_IBIE BIT6
+/** Master / Slave Mode 0b - Slave mode 1b - Master mode
+ When you change this field from 0 to 1, the module generates a START signal
+ on the bus and selects the master mode. When you change this field from 1 to
+ 0, the module generates a STOP signal and changes the operation mode from
+ master to slave. You should generate a STOP signal only if IBSR[IBIF]=1.
+ The module clears this field without generating a STOP signal when the
+ master loses arbitration.
+*/
+#define I2C_IBCR_MSSL BIT5
+// 0b - Receive 1b - Transmit
+#define I2C_IBCR_TXRX BIT4
+/** Data acknowledge disable
+ Values written to this field are only used when the I2C module is a receiver,
+ not a transmitter.
+ 0b - The module sends an acknowledge signal to the bus at the 9th clock bit
+ after receiving one byte of data.
+ 1b - The module does not send an acknowledge-signal response (that is,
+ acknowledge bit = 1).
+**/
+#define I2C_IBCR_NOACK BIT3
+/**Repeat START
+ If the I2C module is the current bus master, and you program RSTA=1, the I2C
+ module generates a repeated START condition. This field always reads as a 0.
+ If you attempt a repeated START at the wrong time, if the bus is owned by
+ another master the result is loss of arbitration.
+**/
+#define I2C_IBCR_RSTA BIT2
+// DMA enable
+#define I2C_IBCR_DMAEN BIT1
+
+// Transfer Complete
+#define I2C_IBSR_TCF BIT7
+// I2C bus Busy. 0b - Bus is idle, 1b - Bus is busy
+#define I2C_IBSR_IBB BIT5
+// Arbitration Lost. software must clear this field by writing a one to it.
+#define I2C_IBSR_IBAL BIT4
+// I2C bus interrupt flag
+#define I2C_IBSR_IBIF BIT1
+// Received acknowledge 0b - Acknowledge received 1b - No acknowledge received
+#define I2C_IBSR_RXAK BIT0
+
+//Bus idle interrupt enable
+#define I2C_IBIC_BIIE BIT7
+
+// Glitch filter enable
+#define I2C_IBDBG_GLFLT_EN BIT3
+
+#define I2C_BUS_TEST_BUSY TRUE
+#define I2C_BUS_TEST_IDLE !I2C_BUS_TEST_BUSY
+#define I2C_BUS_TEST_RX_ACK TRUE
+#define I2C_BUS_NO_TEST_RX_ACK !I2C_BUS_TEST_RX_ACK
+
+#define ARRAY_LAST_ELEM(x) (x)[ARRAY_SIZE (x) - 1]
+#define I2C_NUM_RETRIES 500
+
+typedef struct _I2C_REGS {
+ UINT8 Ibad; // I2c Bus Address Register
+ UINT8 Ibfd; // I2c Bus Frequency Dividor Register
+ UINT8 Ibcr; // I2c Bus Control Register
+ UINT8 Ibsr; // I2c Bus Status Register
+ UINT8 Ibdr; // I2C Bus Data I/O Register
+ UINT8 Ibic; // I2C Bus Interrupt Config Register
+ UINT8 Ibdbg; // I2C Bus Debug Register
+} I2C_REGS;
+
+/*
+ * sorted list of clock divisor, Ibfd register value pairs
+ */
+typedef struct _I2C_CLOCK_DIVISOR_PAIR {
+ UINT16 Divisor;
+ UINT16 Ibfd; // I2c Bus Frequency Dividor Register value
+} I2C_CLOCK_DIVISOR_PAIR;
+
+typedef struct {
+ UINTN OperationCount;
+ EFI_I2C_OPERATION Operation[2];
+} I2C_REG_REQUEST;
+
+#endif // I2C_LIB_INTERNAL_H__
+
diff --git a/Silicon/NXP/Library/I2cLib/I2cLib.c b/Silicon/NXP/Library/I2cLib/I2cLib.c
new file mode 100644
index 000000000000..34443cdaf763
--- /dev/null
+++ b/Silicon/NXP/Library/I2cLib/I2cLib.c
@@ -0,0 +1,589 @@
+/** @file
+ I2c Lib to control I2c controller.
+
+ Copyright 2017, 2020 NXP
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Revision Reference:
+ - PI Version 1.7
+
+ @par Glossary:
+ - Ibfd - I2c Bus Frequency Divider
+**/
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/I2cLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+
+#include "I2cLibInternal.h"
+
+/**
+ I2C divisor and Ibfd register values when glitch filter is enabled
+
+ In case of duplicate SCL Divisor value, the Ibfd value with high MUL value
+ has been selected. A higher MUL value results in a lower sampling rate of
+ the I2C signals. This gives the I2C module greater immunity against glitches
+ in the I2C signals.
+
+ These values can be referred from NXP QorIQ Layerscape series SOC Reference
+ Manual in which this I2C ip has been used. e.g. LX2160ARM, LS1043ARM
+**/
+STATIC CONST I2C_CLOCK_DIVISOR_PAIR mI2cClockDivisorGlitchEnabled[] = {
+ { 34, 0x0 }, { 36, 0x1 }, { 38, 0x2 }, { 40, 0x3 },
+ { 42, 0x4 }, { 44, 0x8 }, { 48, 0x9 }, { 52, 0xA },
+ { 54, 0x7 }, { 56, 0xB }, { 60, 0xC }, { 64, 0x10 },
+ { 68, 0x40 }, { 72, 0x41 }, { 76, 0x42 }, { 80, 0x43 },
+ { 84, 0x44 }, { 88, 0x48 }, { 96, 0x49 }, { 104, 0x4A },
+ { 108, 0x47 }, { 112, 0x4B }, { 120, 0x4C }, { 128, 0x50 },
+ { 136, 0x80 }, { 144, 0x81 }, { 152, 0x82 }, { 160, 0x83 },
+ { 168, 0x84 }, { 176, 0x88 }, { 192, 0x89 }, { 208, 0x8A },
+ { 216, 0x87 }, { 224, 0x8B }, { 240, 0x8C }, { 256, 0x90 },
+ { 288, 0x91 }, { 320, 0x92 }, { 336, 0x8F }, { 352, 0x93 },
+ { 384, 0x98 }, { 416, 0x95 }, { 448, 0x99 }, { 480, 0x96 },
+ { 512, 0x9A }, { 576, 0x9B }, { 640, 0xA0 }, { 704, 0x9D },
+ { 768, 0xA1 }, { 832, 0x9E }, { 896, 0xA2 }, { 960, 0x67 },
+ { 1024, 0xA3 }, { 1152, 0xA4 }, { 1280, 0xA8 }, { 1536, 0xA9 },
+ { 1792, 0xAA }, { 1920, 0xA7 }, { 2048, 0xAB }, { 2304, 0xAC },
+ { 2560, 0xB0 }, { 3072, 0xB1 }, { 3584, 0xB2 }, { 3840, 0xAF },
+ { 4096, 0xB3 }, { 4608, 0xB4 }, { 5120, 0xB8 }, { 6144, 0xB9 },
+ { 7168, 0xBA }, { 7680, 0xB7 }, { 8192, 0xBB }, { 9216, 0xBC },
+ { 10240, 0xBD }, { 12288, 0xBE }, { 15360, 0xBF }
+};
+
+/**
+ I2C divisor and Ibfd register values when glitch filter is disabled
+
+ In case of duplicate SCL Divisor value, the Ibfd value with high MUL value
+ has been selected. A higher MUL value results in a lower sampling rate of
+ the I2C signals. This gives the I2C module greater immunity against glitches
+ in the I2C signals.
+
+ These values can be referred from NXP QorIQ Layerscape series SOC Reference
+ Manual in which this I2C ip has been used. e.g. LX2160ARM, LS1043ARM
+**/
+STATIC CONST I2C_CLOCK_DIVISOR_PAIR mI2cClockDivisorGlitchDisabled[] = {
+ { 20, 0x0 },{ 22, 0x1 },{ 24, 0x2 },{ 26, 0x3 },
+ { 28, 0x8 },{ 30, 0x5 },{ 32, 0x9 },{ 34, 0x6 },
+ { 36, 0x0A },{ 40, 0x40 },{ 44, 0x41 },{ 48, 0x42 },
+ { 52, 0x43 },{ 56, 0x48 },{ 60, 0x45 },{ 64, 0x49 },
+ { 68, 0x46 },{ 72, 0x4A },{ 80, 0x80 },{ 88, 0x81 },
+ { 96, 0x82 },{ 104, 0x83 },{ 112, 0x88 },{ 120, 0x85 },
+ { 128, 0x89 },{ 136, 0x86 },{ 144, 0x8A },{ 160, 0x8B },
+ { 176, 0x8C },{ 192, 0x90 },{ 208, 0x56 },{ 224, 0x91 },
+ { 240, 0x1F },{ 256, 0x92 },{ 272, 0x8F },{ 288, 0x93 },
+ { 320, 0x98 },{ 352, 0x95 },{ 384, 0x99 },{ 416, 0x96 },
+ { 448, 0x9A },{ 480, 0x5F },{ 512, 0x9B },{ 576, 0x9C },
+ { 640, 0xA0 },{ 768, 0xA1 },{ 896, 0xA2 },{ 960, 0x9F },
+ { 1024, 0xA3 },{ 1152, 0xA4 },{ 1280, 0xA8 },{ 1536, 0xA9 },
+ { 1792, 0xAA },{ 1920, 0xA7 },{ 2048, 0xAB },{ 2304, 0xAC },
+ { 2560, 0xAD },{ 3072, 0xB1 },{ 3584, 0xB2 },{ 3840, 0xAF },
+ { 4096, 0xB3 },{ 4608, 0xB4 },{ 5120, 0xB8 },{ 6144, 0xB9 },
+ { 7168, 0xBA },{ 7680, 0xB7 },{ 8192, 0xBB },{ 9216, 0xBC },
+ { 10240, 0xBD },{ 12288, 0xBE },{ 15360, 0xBF }
+};
+
+/**
+ A-009203 : I2C may not work reliably with the default setting
+
+ Description : The clocking circuitry of I2C module may not work reliably due
+ to the slow rise time of SCL signal.
+ Workaround : Enable the receiver digital filter by setting IBDBG[GLFLT_EN]
+ to 1. refer https://patchwork.ozlabs.org/patch/453575/
+**/
+STATIC
+VOID
+I2cErratumA009203 (
+ IN UINTN Base
+ )
+{
+ I2C_REGS *Regs;
+
+ Regs = (I2C_REGS *)Base;
+
+ MmioOr8 ((UINTN)&Regs->Ibdbg, I2C_IBDBG_GLFLT_EN);
+}
+
+/**
+ software reset of the entire I2C module.
+ The module is reset and disabled.
+ Status register fields (IBSR) are cleared.
+
+ @param[in] Base Base Address of I2c controller's registers
+
+ @return EFI_SUCCESS successfuly reset the I2c module
+**/
+EFI_STATUS
+I2cReset (
+ IN UINTN Base
+ )
+{
+ I2C_REGS *Regs;
+
+ Regs = (I2C_REGS *)Base;
+
+ MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_MDIS);
+ MmioOr8 ((UINTN)&Regs->Ibsr, (I2C_IBSR_IBAL | I2C_IBSR_IBIF));
+ MmioAnd8 ((UINTN)&Regs->Ibcr, ~(I2C_IBCR_IBIE | I2C_IBCR_DMAEN));
+ MmioAnd8 ((UINTN)&Regs->Ibic, (UINT8)(~I2C_IBIC_BIIE));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Early init I2C for reading the sysclk from I2c slave device.
+ I2c bus clock is determined from the clock input to I2c controller.
+ The clock input to I2c controller is derived from the sysclk.
+ sysclk is determined by clock generator, which is controller by i2c.
+
+ So, it's a chicken-egg problem to read the sysclk from clock generator.
+ To break this cycle (i.e. to read the sysclk), we setup the i2c bus clock to
+ lowest value, in the hope that it won't be out of clock generator's supported
+ i2c clock frequency. Once we have the correct sysclk, we can setup the
+ correct i2c bus clock.
+
+ @param[in] Base Base Address of I2c controller's registers
+
+ @return EFI_SUCCESS successfuly setup the i2c bus for reading sysclk
+**/
+EFI_STATUS
+I2cEarlyInitialize (
+ IN UINTN Base
+ )
+{
+ I2C_REGS *Regs;
+ UINT8 Ibfd;
+
+ Regs = (I2C_REGS *)Base;
+ if (FeaturePcdGet (PcdI2cErratumA009203)) {
+ // Apply Erratum A-009203 before writing Ibfd register
+ I2cErratumA009203 (Base);
+ }
+
+ if (MmioRead8 ((UINTN)&Regs->Ibdbg) & I2C_IBDBG_GLFLT_EN) {
+ Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchEnabled).Ibfd;
+ } else {
+ Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchDisabled).Ibfd;
+ }
+
+ MmioWrite8 ((UINTN)&Regs->Ibfd, Ibfd);
+
+ I2cReset (Base);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Configure I2c bus to operate at a given speed
+
+ @param[in] Base Base Address of I2c controller's registers
+ @param[in] I2cBusClock Input clock to I2c controller
+ @param[in] Speed speed to be configured for I2c bus
+
+ @return EFI_SUCCESS successfuly setup the i2c bus
+**/
+EFI_STATUS
+I2cInitialize (
+ IN UINTN Base,
+ IN UINT64 I2cBusClock,
+ IN UINT64 Speed
+ )
+{
+ I2C_REGS *Regs;
+ UINT16 ClockDivisor;
+ UINT8 Ibfd; // I2c Bus Frequency Divider Register
+ CONST I2C_CLOCK_DIVISOR_PAIR *ClockDivisorPair;
+ UINT32 ClockDivisorPairSize;
+ UINT32 Index;
+
+ Regs = (I2C_REGS *)Base;
+ if (FeaturePcdGet (PcdI2cErratumA009203)) {
+ // Apply Erratum A-009203 before writing Ibfd register
+ I2cErratumA009203 (Base);
+ }
+
+ Ibfd = 0;
+ ClockDivisor = (I2cBusClock + Speed - 1) / Speed;
+
+ if (MmioRead8 ((UINTN)&Regs->Ibdbg) & I2C_IBDBG_GLFLT_EN) {
+ ClockDivisorPair = mI2cClockDivisorGlitchEnabled;
+ ClockDivisorPairSize = ARRAY_SIZE (mI2cClockDivisorGlitchEnabled);
+ } else {
+ ClockDivisorPair = mI2cClockDivisorGlitchDisabled;
+ ClockDivisorPairSize = ARRAY_SIZE (mI2cClockDivisorGlitchDisabled);
+ }
+
+ if (ClockDivisor > ClockDivisorPair[ClockDivisorPairSize - 1].Divisor) {
+ Ibfd = ClockDivisorPair[ClockDivisorPairSize - 1].Ibfd;
+ } else {
+ for (Index = 0; Index < ClockDivisorPairSize; Index++) {
+ if (ClockDivisorPair[Index].Divisor >= ClockDivisor) {
+ Ibfd = ClockDivisorPair[Index].Ibfd;
+ break;
+ }
+ }
+ }
+
+ MmioWrite8 ((UINTN)&Regs->Ibfd, Ibfd);
+
+ I2cReset (Base);
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+I2cBusTestBusBusy (
+ IN I2C_REGS *Regs,
+ IN BOOLEAN TestBusy
+ )
+{
+ UINT32 Index;
+ UINT8 Reg;
+
+ for (Index = 0; Index < I2C_NUM_RETRIES; Index++) {
+ Reg = MmioRead8 ((UINTN)&Regs->Ibsr);
+
+ if (Reg & I2C_IBSR_IBAL) {
+ MmioWrite8 ((UINTN)&Regs->Ibsr, Reg);
+ return EFI_NOT_READY;
+ }
+
+ if (TestBusy && (Reg & I2C_IBSR_IBB)) {
+ break;
+ }
+
+ if (!TestBusy && !(Reg & I2C_IBSR_IBB)) {
+ break;
+ }
+
+ MicroSecondDelay (1);
+ }
+
+ if (Index == I2C_NUM_RETRIES) {
+ return EFI_TIMEOUT;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+I2cTransferComplete (
+ IN I2C_REGS *Regs,
+ IN BOOLEAN TestRxAck
+)
+{
+ UINT32 Index;
+ UINT8 Reg;
+
+ for (Index = 0; Index < I2C_NUM_RETRIES; Index++) {
+ Reg = MmioRead8 ((UINTN)&Regs->Ibsr);
+
+ if (Reg & I2C_IBSR_IBIF) {
+ // Write 1 to clear the IBIF field
+ MmioWrite8 ((UINTN)&Regs->Ibsr, Reg);
+ break;
+ }
+
+ MicroSecondDelay (1);
+ }
+
+ if (Index == I2C_NUM_RETRIES) {
+ return EFI_TIMEOUT;
+ }
+
+ if (TestRxAck && (Reg & I2C_IBSR_RXAK)) {
+ return EFI_NO_RESPONSE;
+ }
+
+ if (Reg & I2C_IBSR_TCF) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_DEVICE_ERROR;
+}
+
+STATIC
+EFI_STATUS
+I2cRead (
+ IN I2C_REGS *Regs,
+ IN UINT32 SlaveAddress,
+ IN EFI_I2C_OPERATION *Operation,
+ IN BOOLEAN IsLastOperation
+)
+{
+ EFI_STATUS Status;
+ UINTN Index;
+
+ // Write Slave Address
+ MmioWrite8 ((UINTN)&Regs->Ibdr, (SlaveAddress << BIT0) | BIT0);
+ Status = I2cTransferComplete (Regs, I2C_BUS_TEST_RX_ACK);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ // select Receive mode.
+ MmioAnd8 ((UINTN)&Regs->Ibcr, ~I2C_IBCR_TXRX);
+ if (Operation->LengthInBytes > 1) {
+ // Set No ACK = 0
+ MmioAnd8 ((UINTN)&Regs->Ibcr, ~I2C_IBCR_NOACK);
+ }
+
+ // Perform a dummy read to initiate the receive operation.
+ MmioRead8 ((UINTN)&Regs->Ibdr);
+
+ for (Index = 0; Index < Operation->LengthInBytes; Index++) {
+ Status = I2cTransferComplete (Regs, I2C_BUS_NO_TEST_RX_ACK);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (Index == (Operation->LengthInBytes - 2)) {
+ // Set No ACK = 1
+ MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_NOACK);
+ } else if (Index == (Operation->LengthInBytes - 1)) {
+ if (!IsLastOperation) {
+ // select Transmit mode (for repeat start)
+ MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_TXRX);
+ } else {
+ // Generate Stop Signal
+ MmioAnd8 ((UINTN)&Regs->Ibcr, ~(I2C_IBCR_MSSL | I2C_IBCR_TXRX));
+ Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_IDLE);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+ }
+ Operation->Buffer[Index] = MmioRead8 ((UINTN)&Regs->Ibdr);
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+I2cWrite (
+ IN I2C_REGS *Regs,
+ IN UINT32 SlaveAddress,
+ IN EFI_I2C_OPERATION *Operation
+)
+{
+ EFI_STATUS Status;
+ UINTN Index;
+
+ // Write Slave Address
+ MmioWrite8 ((UINTN)&Regs->Ibdr, (SlaveAddress << BIT0) & (UINT8)(~BIT0));
+ Status = I2cTransferComplete (Regs, I2C_BUS_TEST_RX_ACK);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Write Data
+ for (Index = 0; Index < Operation->LengthInBytes; Index++) {
+ MmioWrite8 ((UINTN)&Regs->Ibdr, Operation->Buffer[Index]);
+ Status = I2cTransferComplete (Regs, I2C_BUS_TEST_RX_ACK);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+I2cStop (
+ IN I2C_REGS *Regs
+ )
+{
+ EFI_STATUS Status;
+ UINT8 Reg;
+
+ Status = EFI_SUCCESS;
+ Reg = MmioRead8 ((UINTN)&Regs->Ibsr);
+ if (Reg & I2C_IBSR_IBB) {
+ // Generate Stop Signal
+ MmioAnd8 ((UINTN)&Regs->Ibcr, ~(I2C_IBCR_MSSL | I2C_IBCR_TXRX));
+ Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_IDLE);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+
+ // Disable I2c Controller
+ MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_MDIS);
+
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+I2cStart (
+ IN I2C_REGS *Regs
+ )
+{
+ EFI_STATUS Status;
+
+ MmioOr8 ((UINTN)&Regs->Ibsr, (I2C_IBSR_IBAL | I2C_IBSR_IBIF));
+ MmioAnd8 ((UINTN)&Regs->Ibcr, (UINT8)(~I2C_IBCR_MDIS));
+
+ //Wait controller to be stable
+ MicroSecondDelay (1);
+
+ // Generate Start Signal
+ MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_MSSL);
+ Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_BUSY);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Select Transmit Mode. set No ACK = 1
+ MmioOr8 ((UINTN)&Regs->Ibcr, (I2C_IBCR_TXRX | I2C_IBCR_NOACK));
+
+ return Status;
+}
+
+/**
+ Transfer data to/from I2c slave device
+
+ @param[in] Base Base Address of I2c controller's registers
+ @param[in] SlaveAddress Slave Address from which data is to be read
+ @param[in] RequestPacket Pointer to an EFI_I2C_REQUEST_PACKET structure
+ describing the I2C transaction
+
+ @return EFI_SUCCESS successfuly transfer the data
+ @return EFI_DEVICE_ERROR There was an error while transferring data through
+ I2c bus
+ @return EFI_NO_RESPONSE There was no Ack from i2c device
+ @return EFI_TIMEOUT I2c Bus is busy
+ @return EFI_NOT_READY I2c Bus Arbitration lost
+**/
+EFI_STATUS
+I2cBusXfer (
+ IN UINTN Base,
+ IN UINT32 SlaveAddress,
+ IN EFI_I2C_REQUEST_PACKET *RequestPacket
+ )
+{
+ UINTN Index;
+ I2C_REGS *Regs;
+ EFI_I2C_OPERATION *Operation;
+ EFI_STATUS Status;
+ BOOLEAN IsLastOperation;
+
+ Regs = (I2C_REGS *)Base;
+ IsLastOperation = FALSE;
+
+ Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_IDLE);
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ Status = I2cStart (Regs);
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+
+ for (Index = 0, Operation = RequestPacket->Operation;
+ Index < RequestPacket->OperationCount;
+ Index++, Operation++) {
+ if (Index == (RequestPacket->OperationCount - 1)) {
+ IsLastOperation = TRUE;
+ }
+ // Send repeat start after first transmit/recieve
+ if (Index) {
+ MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_RSTA);
+ Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_BUSY);
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+ }
+ // Read/write data
+ if (Operation->Flags & I2C_FLAG_READ) {
+ Status = I2cRead (Regs, SlaveAddress, Operation, IsLastOperation);
+ } else {
+ Status = I2cWrite (Regs, SlaveAddress, Operation);
+ }
+ if (EFI_ERROR (Status)) {
+ goto ErrorExit;
+ }
+ }
+
+ErrorExit:
+
+ I2cStop (Regs);
+
+ return Status;
+}
+
+/**
+ Read a register from I2c slave device. This API is wrapper around I2cBusXfer
+
+ @param[in] Base Base Address of I2c controller's registers
+ @param[in] SlaveAddress Slave Address from which register value is
+ to be read
+ @param[in] RegAddress Register Address in Slave's memory map
+ @param[in] RegAddressWidthInBytes Number of bytes in RegAddress to send to
+ I2c Slave for simple reads without any
+ register, make this value = 0
+ (RegAddress is don't care in that case)
+ @param[out] RegValue Value to be read from I2c slave's regiser
+ @param[in] RegValueNumBytes Number of bytes to read from I2c slave
+ register
+
+ @return EFI_SUCCESS successfuly read the registers
+ @return EFI_DEVICE_ERROR There was an error while transferring data through
+ I2c bus
+ @return EFI_NO_RESPONSE There was no Ack from i2c device
+ @return EFI_TIMEOUT I2c Bus is busy
+ @return EFI_NOT_READY I2c Bus Arbitration lost
+**/
+EFI_STATUS
+I2cBusReadReg (
+ IN UINTN Base,
+ IN UINT32 SlaveAddress,
+ IN UINT64 RegAddress,
+ IN UINT8 RegAddressWidthInBytes,
+ OUT UINT8 *RegValue,
+ IN UINT32 RegValueNumBytes
+ )
+{
+ EFI_I2C_OPERATION *Operations;
+ I2C_REG_REQUEST RequestPacket;
+ UINTN OperationCount;
+ UINT8 Address[sizeof (RegAddress)];
+ UINT8 *AddressPtr;
+ EFI_STATUS Status;
+
+ ZeroMem (&RequestPacket, sizeof (RequestPacket));
+ OperationCount = 0;
+ Operations = RequestPacket.Operation;
+ AddressPtr = Address;
+
+ if (RegAddressWidthInBytes > ARRAY_SIZE (Address)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (RegAddressWidthInBytes != 0) {
+ Operations[OperationCount].LengthInBytes = RegAddressWidthInBytes;
+ Operations[OperationCount].Buffer = AddressPtr;
+ while (RegAddressWidthInBytes--) {
+ *AddressPtr++ = RegAddress >> (8 * RegAddressWidthInBytes);
+ }
+ OperationCount++;
+ }
+
+ Operations[OperationCount].LengthInBytes = RegValueNumBytes;
+ Operations[OperationCount].Buffer = RegValue;
+ Operations[OperationCount].Flags = I2C_FLAG_READ;
+ OperationCount++;
+
+ RequestPacket.OperationCount = OperationCount;
+
+ Status = I2cBusXfer (
+ Base, SlaveAddress,
+ (EFI_I2C_REQUEST_PACKET *)&RequestPacket
+ );
+
+ return Status;
+}
+
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 02/24] Silicon/NXP: changes to use I2clib in i2cdxe
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-22 16:41 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 03/24] Silicon/NXP/I2cDxe: Fix I2c Timeout with RTC Pankaj Bansal
` (22 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
I2c lib contains the i2c controller functionality. this can be used
in I2c DXE driver to communicate with i2c devices.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- moved I2cLib addition to NxpQoriqLs.dsc.inc
Platform/NXP/NxpQoriqLs.dsc.inc | 4 +-
Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 9 +-
Silicon/NXP/Drivers/I2cDxe/I2cDxe.h | 44 +-
Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 526 +-------------------
4 files changed, 19 insertions(+), 564 deletions(-)
diff --git a/Platform/NXP/NxpQoriqLs.dsc.inc b/Platform/NXP/NxpQoriqLs.dsc.inc
index fa5f30dd3909..25c0a41e5d4a 100644
--- a/Platform/NXP/NxpQoriqLs.dsc.inc
+++ b/Platform/NXP/NxpQoriqLs.dsc.inc
@@ -1,6 +1,6 @@
# @file
#
-# Copyright 2017-2019 NXP.
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -94,6 +94,8 @@
NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ I2cLib|Silicon/NXP/Library/I2cLib/I2cLib.inf
+
[LibraryClasses.common.SEC]
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
index 0c0bf63bb2e2..84adb837c249 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
@@ -3,7 +3,7 @@
# Component description file for I2c driver
#
# Copyright (c) 2015, Freescale Semiconductor, Inc. All rights reserved.
-# Copyright 2017-2019 NXP
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -27,6 +27,7 @@
ArmLib
BaseMemoryLib
DevicePathLib
+ I2cLib
IoLib
MemoryAllocationLib
PcdLib
@@ -48,11 +49,5 @@
gEdkiiNonDiscoverableDeviceProtocolGuid ## TO_START
gEfiI2cMasterProtocolGuid ## BY_START
-[Pcd]
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSpeed
- gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSize
- gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController
-
[Depex]
TRUE
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
index 02a29a5cf2b9..88316f313380 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
@@ -1,7 +1,7 @@
/** I2cDxe.h
Header defining the constant, base address amd function for I2C controller
- Copyright 2017-2019 NXP
+ Copyright 2017-2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -16,32 +16,6 @@
#include <Protocol/I2cMaster.h>
#include <Protocol/NonDiscoverableDevice.h>
-#define I2C_CR_IIEN (1 << 6)
-#define I2C_CR_MSTA (1 << 5)
-#define I2C_CR_MTX (1 << 4)
-#define I2C_CR_TX_NO_AK (1 << 3)
-#define I2C_CR_RSTA (1 << 2)
-
-#define I2C_SR_ICF (1 << 7)
-#define I2C_SR_IBB (1 << 5)
-#define I2C_SR_IAL (1 << 4)
-#define I2C_SR_IIF (1 << 1)
-#define I2C_SR_RX_NO_AK (1 << 0)
-
-#define I2C_CR_IEN (0 << 7)
-#define I2C_CR_IDIS (1 << 7)
-#define I2C_SR_IIF_CLEAR (1 << 1)
-
-#define BUS_IDLE (0 | (I2C_SR_IBB << 8))
-#define BUS_BUSY (I2C_SR_IBB | (I2C_SR_IBB << 8))
-#define IIF (I2C_SR_IIF | (I2C_SR_IIF << 8))
-
-#define I2C_FLAG_WRITE 0x0
-
-#define I2C_STATE_RETRIES 50000
-
-#define RETRY_COUNT 3
-
#define NXP_I2C_SIGNATURE SIGNATURE_32 ('N', 'I', '2', 'C')
#define NXP_I2C_FROM_THIS(a) CR ((a), NXP_I2C_MASTER, \
I2cMaster, NXP_I2C_SIGNATURE)
@@ -63,22 +37,6 @@ typedef struct {
NON_DISCOVERABLE_DEVICE *Dev;
} NXP_I2C_MASTER;
-/**
- Record defining i2c registers
-**/
-typedef struct {
- UINT8 I2cAdr;
- UINT8 I2cFdr;
- UINT8 I2cCr;
- UINT8 I2cSr;
- UINT8 I2cDr;
-} I2C_REGS;
-
-typedef struct {
- UINT16 SCLDivider;
- UINT16 BusClockRate;
-} CLK_DIV;
-
extern
UINT64
GetBusFrequency (
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
index 853c426fbca2..848e707c1673 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
@@ -1,7 +1,7 @@
/** I2cDxe.c
I2c driver APIs for read, write, initialize, set speed and reset
- Copyright 2017-2019 NXP
+ Copyright 2017-2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -10,6 +10,7 @@
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/DevicePathLib.h>
+#include <Library/I2cLib.h>
#include <Library/IoLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/TimerLib.h>
@@ -25,444 +26,6 @@ STATIC CONST EFI_I2C_CONTROLLER_CAPABILITIES mI2cControllerCapabilities = {
0
};
-STATIC CONST CLK_DIV mClkDiv[] = {
- { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
- { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
- { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
- { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
- { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
- { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
- { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
- { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
- { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
- { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
- { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
- { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
- { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
- { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
- { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E }
-};
-
-/**
- Calculate and return proper clock divider
-
- @param Rate desired clock rate
-
- @retval ClkDiv Index value used to get Bus Clock Rate
-
-**/
-STATIC
-UINT8
-GetClkDivIndex (
- IN UINT32 Rate
- )
-{
- UINTN ClkRate;
- UINT32 Div;
- UINT8 Index;
-
- Index = 0;
- ClkRate = GetBusFrequency ();
-
- Div = (ClkRate + Rate - 1) / Rate;
-
- if (Div < mClkDiv[0].SCLDivider) {
- return 0;
- }
-
- do {
- if (mClkDiv[Index].SCLDivider >= Div ) {
- return Index;
- }
- Index++;
- } while (Index < ARRAY_SIZE (mClkDiv));
-
- return (ARRAY_SIZE (mClkDiv) - 1);
-}
-
-/**
- Function used to check if i2c is in mentioned state or not
-
- @param I2cRegs Pointer to I2C registers
- @param State i2c state need to be checked
-
- @retval EFI_NOT_READY Arbitration was lost
- @retval EFI_TIMEOUT Timeout occured
- @retval CurrState Value of state register
-
-**/
-STATIC
-EFI_STATUS
-WaitForI2cState (
- IN I2C_REGS *I2cRegs,
- IN UINT32 State
- )
-{
- UINT8 CurrState;
- UINT64 Count;
-
- for (Count = 0; Count < I2C_STATE_RETRIES; Count++) {
- MemoryFence ();
- CurrState = MmioRead8 ((UINTN)&I2cRegs->I2cSr);
- if (CurrState & I2C_SR_IAL) {
- MmioWrite8 ((UINTN)&I2cRegs->I2cSr, CurrState | I2C_SR_IAL);
- return EFI_NOT_READY;
- }
-
- if ((CurrState & (State >> 8)) == (UINT8)State) {
- return CurrState;
- }
- }
-
- return EFI_TIMEOUT;
-}
-
-/**
- Function to transfer byte on i2c
-
- @param I2cRegs Pointer to i2c registers
- @param Byte Byte to be transferred on i2c bus
-
- @retval EFI_NOT_READY Arbitration was lost
- @retval EFI_TIMEOUT Timeout occured
- @retval EFI_NOT_FOUND ACK was not recieved
- @retval EFI_SUCCESS Data transfer was succesful
-
-**/
-STATIC
-EFI_STATUS
-TransferByte (
- IN I2C_REGS *I2cRegs,
- IN UINT8 Byte
- )
-{
- EFI_STATUS RetVal;
-
- MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
- MmioWrite8 ((UINTN)&I2cRegs->I2cDr, Byte);
-
- RetVal = WaitForI2cState (I2cRegs, IIF);
- if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
- return RetVal;
- }
-
- if (RetVal & I2C_SR_RX_NO_AK) {
- return EFI_NOT_FOUND;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Function to stop transaction on i2c bus
-
- @param I2cRegs Pointer to i2c registers
-
- @retval EFI_NOT_READY Arbitration was lost
- @retval EFI_TIMEOUT Timeout occured
- @retval EFI_SUCCESS Stop operation was successful
-
-**/
-STATIC
-EFI_STATUS
-I2cStop (
- IN I2C_REGS *I2cRegs
- )
-{
- EFI_STATUS RetVal;
- UINT32 Temp;
-
- Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
-
- Temp &= ~(I2C_CR_MSTA | I2C_CR_MTX);
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
-
- RetVal = WaitForI2cState (I2cRegs, BUS_IDLE);
-
- if (RetVal < 0) {
- return RetVal;
- } else {
- return EFI_SUCCESS;
- }
-}
-
-/**
- Function to send start signal, Chip Address and
- memory offset
-
- @param I2cRegs Pointer to i2c base registers
- @param Chip Chip Address
- @param Offset Slave memory's offset
- @param AddressLength length of chip address
-
- @retval EFI_NOT_READY Arbitration lost
- @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
- @retval EFI_NOT_FOUND ACK was not recieved
- @retval EFI_SUCCESS Read was successful
-
-**/
-STATIC
-EFI_STATUS
-InitTransfer (
- IN I2C_REGS *I2cRegs,
- IN UINT8 Chip,
- IN UINT32 Offset,
- IN INT32 AddressLength
- )
-{
- UINT32 Temp;
- EFI_STATUS RetVal;
-
- // Enable I2C controller
- if (MmioRead8 ((UINTN)&I2cRegs->I2cCr) & I2C_CR_IDIS) {
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IEN);
- }
-
- if (MmioRead8 ((UINTN)&I2cRegs->I2cAdr) == (Chip << 1)) {
- MmioWrite8 ((UINTN)&I2cRegs->I2cAdr, (Chip << 1) ^ 2);
- }
-
- MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
- RetVal = WaitForI2cState (I2cRegs, BUS_IDLE);
- if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
- return RetVal;
- }
-
- // Start I2C transaction
- Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
- // set to master mode
- Temp |= I2C_CR_MSTA;
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
-
- RetVal = WaitForI2cState (I2cRegs, BUS_BUSY);
- if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
- return RetVal;
- }
-
- Temp |= I2C_CR_MTX | I2C_CR_TX_NO_AK;
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
-
- // write slave Address
- RetVal = TransferByte (I2cRegs, Chip << 1);
- if (RetVal != EFI_SUCCESS) {
- return RetVal;
- }
-
- if (AddressLength >= 0) {
- while (AddressLength--) {
- RetVal = TransferByte (I2cRegs, (Offset >> (AddressLength * 8)) & 0xff);
- if (RetVal != EFI_SUCCESS)
- return RetVal;
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Function to check if i2c bus is idle
-
- @param Base Pointer to base address of I2c controller
-
- @retval EFI_SUCCESS
-
-**/
-STATIC
-INT32
-I2cBusIdle (
- IN VOID *Base
- )
-{
- return EFI_SUCCESS;
-}
-
-/**
- Function to initiate data transfer on i2c bus
-
- @param I2cRegs Pointer to i2c base registers
- @param Chip Chip Address
- @param Offset Slave memory's offset
- @param AddressLength length of chip address
-
- @retval EFI_NOT_READY Arbitration lost
- @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
- @retval EFI_NOT_FOUND ACK was not recieved
- @retval EFI_SUCCESS Read was successful
-
-**/
-STATIC
-EFI_STATUS
-InitDataTransfer (
- IN I2C_REGS *I2cRegs,
- IN UINT8 Chip,
- IN UINT32 Offset,
- IN INT32 AddressLength
- )
-{
- EFI_STATUS RetVal;
- INT32 Retry;
-
- for (Retry = 0; Retry < RETRY_COUNT; Retry++) {
- RetVal = InitTransfer (I2cRegs, Chip, Offset, AddressLength);
- if (RetVal == EFI_SUCCESS) {
- return EFI_SUCCESS;
- }
-
- I2cStop (I2cRegs);
-
- if (EFI_NOT_FOUND == RetVal) {
- return RetVal;
- }
-
- // Disable controller
- if (RetVal != EFI_NOT_READY) {
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IDIS);
- }
-
- if (I2cBusIdle (I2cRegs) < 0) {
- break;
- }
- }
- return RetVal;
-}
-
-/**
- Function to read data using i2c bus
-
- @param BaseAddr I2c Controller Base Address
- @param Chip Address of slave device from where data to be read
- @param Offset Offset of slave memory
- @param AddressLength Address length of slave
- @param Buffer A pointer to the destination buffer for the data
- @param Len Length of data to be read
-
- @retval EFI_NOT_READY Arbitration lost
- @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
- @retval EFI_NOT_FOUND ACK was not recieved
- @retval EFI_SUCCESS Read was successful
-
-**/
-STATIC
-EFI_STATUS
-I2cDataRead (
- IN UINTN BaseAddr,
- IN UINT8 Chip,
- IN UINT32 Offset,
- IN UINT32 AddressLength,
- IN UINT8 *Buffer,
- IN UINT32 Len
- )
-{
- EFI_STATUS RetVal;
- UINT32 Temp;
- INT32 I;
- I2C_REGS *I2cRegs;
-
- I2cRegs = (I2C_REGS *)(BaseAddr);
-
- RetVal = InitDataTransfer (I2cRegs, Chip, Offset, AddressLength);
- if (RetVal != EFI_SUCCESS) {
- return RetVal;
- }
-
- Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
- Temp |= I2C_CR_RSTA;
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
-
- RetVal = TransferByte (I2cRegs, (Chip << 1) | 1);
- if (RetVal != EFI_SUCCESS) {
- I2cStop (I2cRegs);
- return RetVal;
- }
-
- // setup bus to read data
- Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
- Temp &= ~(I2C_CR_MTX | I2C_CR_TX_NO_AK);
- if (Len == 1) {
- Temp |= I2C_CR_TX_NO_AK;
- }
-
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
- MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
-
- // Dummy Read to initiate recieve operation
- MmioRead8 ((UINTN)&I2cRegs->I2cDr);
-
- for (I = 0; I < Len; I++) {
- RetVal = WaitForI2cState (I2cRegs, IIF);
- if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
- I2cStop (I2cRegs);
- return RetVal;
- }
- //
- // It must generate STOP before read I2DR to prevent
- // controller from generating another clock cycle
- //
- if (I == (Len - 1)) {
- I2cStop (I2cRegs);
- } else if (I == (Len - 2)) {
- Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
- Temp |= I2C_CR_TX_NO_AK;
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
- }
- MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
- Buffer[I] = MmioRead8 ((UINTN)&I2cRegs->I2cDr);
- }
-
- I2cStop (I2cRegs);
-
- return EFI_SUCCESS;
-}
-
-/**
- Function to write data using i2c bus
-
- @param BaseAddr I2c Controller Base Address
- @param Chip Address of slave device where data to be written
- @param Offset Offset of slave memory
- @param AddressLength Address length of slave
- @param Buffer A pointer to the source buffer for the data
- @param Len Length of data to be write
-
- @retval EFI_NOT_READY Arbitration lost
- @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
- @retval EFI_NOT_FOUND ACK was not recieved
- @retval EFI_SUCCESS Read was successful
-
-**/
-STATIC
-EFI_STATUS
-I2cDataWrite (
- IN UINTN BaseAddr,
- IN UINT8 Chip,
- IN UINT32 Offset,
- IN INT32 AddressLength,
- OUT UINT8 *Buffer,
- IN INT32 Len
- )
-{
- EFI_STATUS RetVal;
- I2C_REGS *I2cRegs;
- INT32 I;
-
- I2cRegs = (I2C_REGS *)BaseAddr;
-
- RetVal = InitDataTransfer (I2cRegs, Chip, Offset, AddressLength);
- if (RetVal != EFI_SUCCESS) {
- return RetVal;
- }
-
- // Write operation
- for (I = 0; I < Len; I++) {
- RetVal = TransferByte (I2cRegs, Buffer[I]);
- if (RetVal != EFI_SUCCESS) {
- break;
- }
- }
-
- I2cStop (I2cRegs);
- return RetVal;
-}
-
/**
Function to set i2c bus frequency
@@ -479,22 +42,17 @@ SetBusFrequency (
IN OUT UINTN *BusClockHertz
)
{
- I2C_REGS *I2cRegs;
- UINT8 ClkId;
- UINT8 SpeedId;
+ UINTN I2cBase;
+ UINT64 I2cClock;
NXP_I2C_MASTER *I2c;
I2c = NXP_I2C_FROM_THIS (This);
- I2cRegs = (I2C_REGS *)(I2c->Dev->Resources[0].AddrRangeMin);
+ I2cBase = (UINTN)(I2c->Dev->Resources[0].AddrRangeMin);
- ClkId = GetClkDivIndex (*BusClockHertz);
- SpeedId = mClkDiv[ClkId].BusClockRate;
+ I2cClock = GetBusFrequency ();
- // Store divider value
- MmioWrite8 ((UINTN)&I2cRegs->I2cFdr, SpeedId);
-
- MemoryFence ();
+ I2cInitialize (I2cBase, I2cClock, *BusClockHertz);
return EFI_SUCCESS;
}
@@ -513,19 +71,6 @@ Reset (
IN CONST EFI_I2C_MASTER_PROTOCOL *This
)
{
- I2C_REGS *I2cRegs;
- NXP_I2C_MASTER *I2c;
-
- I2c = NXP_I2C_FROM_THIS (This);
-
- I2cRegs = (I2C_REGS *)(I2c->Dev->Resources[0].AddrRangeMin);
-
- // Reset module
- MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IDIS);
- MmioWrite8 ((UINTN)&I2cRegs->I2cSr, 0);
-
- MemoryFence ();
-
return EFI_SUCCESS;
}
@@ -540,62 +85,17 @@ StartRequest (
OUT EFI_STATUS *I2cStatus OPTIONAL
)
{
- NXP_I2C_MASTER *I2c;
- UINT32 Count;
- INT32 RetVal;
- UINT32 Length;
- UINT8 *Buffer;
- UINT32 Flag;
- UINT32 RegAddress;
- UINT32 OffsetLength;
-
- RegAddress = 0;
+ NXP_I2C_MASTER *I2c;
+ UINTN I2cBase;
+ EFI_STATUS Status;
I2c = NXP_I2C_FROM_THIS (This);
- if (RequestPacket->OperationCount <= 0) {
- DEBUG ((DEBUG_ERROR,"%a: Operation count is not valid %d\n",
- __FUNCTION__, RequestPacket->OperationCount));
- return EFI_INVALID_PARAMETER;
- }
+ I2cBase = (UINTN)(I2c->Dev->Resources[0].AddrRangeMin);
- OffsetLength = RequestPacket->Operation[0].LengthInBytes;
- RegAddress = *RequestPacket->Operation[0].Buffer;
+ Status = I2cBusXfer (I2cBase, SlaveAddress, RequestPacket);
- for (Count = 1; Count < RequestPacket->OperationCount; Count++) {
- Flag = RequestPacket->Operation[Count].Flags;
- Length = RequestPacket->Operation[Count].LengthInBytes;
- Buffer = RequestPacket->Operation[Count].Buffer;
-
- if (Length <= 0) {
- DEBUG ((DEBUG_ERROR,"%a: Invalid length of buffer %d\n",
- __FUNCTION__, Length));
- return EFI_INVALID_PARAMETER;
- }
-
- if (Flag == I2C_FLAG_READ) {
- RetVal = I2cDataRead (I2c->Dev->Resources[0].AddrRangeMin, SlaveAddress,
- RegAddress, OffsetLength, Buffer, Length);
- if (RetVal != EFI_SUCCESS) {
- DEBUG ((DEBUG_ERROR,"%a: I2c read operation failed (error %d)\n",
- __FUNCTION__, RetVal));
- return RetVal;
- }
- } else if (Flag == I2C_FLAG_WRITE) {
- RetVal = I2cDataWrite (I2c->Dev->Resources[0].AddrRangeMin, SlaveAddress,
- RegAddress, OffsetLength, Buffer, Length);
- if (RetVal != EFI_SUCCESS) {
- DEBUG ((DEBUG_ERROR,"%a: I2c write operation failed (error %d)\n",
- __FUNCTION__, RetVal));
- return RetVal;
- }
- } else {
- DEBUG ((DEBUG_ERROR,"%a: Invalid Flag %d\n", __FUNCTION__, Flag));
- return EFI_INVALID_PARAMETER;
- }
- }
-
- return EFI_SUCCESS;
+ return Status;
}
EFI_STATUS
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 03/24] Silicon/NXP/I2cDxe: Fix I2c Timeout with RTC
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 02/24] Silicon/NXP: changes to use I2clib in i2cdxe Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 04/24] Silicon/Maxim: Fix bug in RtcWrite in Ds1307RtcLib Pankaj Bansal
` (21 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
With latest edk2 codebase, sometimes i2c timeout is observed when
Network devices are being probed.
This is happening when gRT->GetTime request is ongoing.
gRT->GetTime triggers a read request to Real Time Clock which is
connected to I2c bus.
In between read request, if an event occurs, which also triggers
gRT->GetTime (i.e. RTC read), the I2c bus goes into unrecovered state.
This state is not even recovered, when rebooting the board.
We need to power off the board completely to recover i2c bus.
To prevent this, TPL level of I2c read is being raised to high, so that
no other event can preempt this. with this solution no timeout has been
observed so far.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 3 ++-
Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 12 ++++++++++++
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
index 84adb837c249..867376044656 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
@@ -13,7 +13,7 @@
INF_VERSION = 0x0001001A
BASE_NAME = I2cDxe
FILE_GUID = 5f2927ba-1b04-4d5f-8bef-2b50c635d1e7
- MODULE_TYPE = DXE_DRIVER
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
VERSION_STRING = 1.0
ENTRY_POINT = I2cDxeEntryPoint
UNLOAD = I2cDxeUnload
@@ -36,6 +36,7 @@
UefiBootServicesTableLib
UefiDriverEntryPoint
UefiLib
+ UefiRuntimeLib
[Guids]
gNxpNonDiscoverableI2cMasterGuid
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
index 848e707c1673..a5aba47b3ed4 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
@@ -16,6 +16,7 @@
#include <Library/TimerLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeLib.h>
#include "I2cDxe.h"
@@ -88,6 +89,13 @@ StartRequest (
NXP_I2C_MASTER *I2c;
UINTN I2cBase;
EFI_STATUS Status;
+ EFI_TPL Tpl;
+ BOOLEAN AtRuntime;
+
+ AtRuntime = EfiAtRuntime ();
+ if (!AtRuntime) {
+ Tpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+ }
I2c = NXP_I2C_FROM_THIS (This);
@@ -95,6 +103,10 @@ StartRequest (
Status = I2cBusXfer (I2cBase, SlaveAddress, RequestPacket);
+ if (!AtRuntime) {
+ gBS->RestoreTPL (Tpl);
+ }
+
return Status;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 04/24] Silicon/Maxim: Fix bug in RtcWrite in Ds1307RtcLib
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (2 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 03/24] Silicon/NXP/I2cDxe: Fix I2c Timeout with RTC Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 05/24] Silicon/Maxim: Add comments " Pankaj Bansal
` (20 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
There was a bug in I2C DXE implementation, which caused the Ds1307 RTC
device to issue two operation for register write, while this is a single
operation task. refer page 12 (Slave Receiver Mode (Write Mode)) on
https://datasheets.maximintegrated.com/en/ds/DS1307.pdf
Modify ds1307 RtcWrite code accordingly.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
index 88dc198ffec8..fd7a8696e405 100644
--- a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
+++ b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
@@ -5,7 +5,7 @@
EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
- Copyright 2017 NXP
+ Copyright 2017, 2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -84,16 +84,15 @@ RtcWrite (
{
RTC_I2C_REQUEST Req;
EFI_STATUS Status;
+ UINT8 Buffer[2];
- Req.OperationCount = 2;
+ Req.OperationCount = 1;
+ Buffer[0] = RtcRegAddr;
+ Buffer[1] = Val;
Req.SetAddressOp.Flags = 0;
- Req.SetAddressOp.LengthInBytes = sizeof (RtcRegAddr);
- Req.SetAddressOp.Buffer = &RtcRegAddr;
-
- Req.GetSetDateTimeOp.Flags = 0;
- Req.GetSetDateTimeOp.LengthInBytes = sizeof (Val);
- Req.GetSetDateTimeOp.Buffer = &Val;
+ Req.SetAddressOp.LengthInBytes = sizeof (Buffer);
+ Req.SetAddressOp.Buffer = Buffer;
Status = mI2cMaster->StartRequest (mI2cMaster, FixedPcdGet8 (PcdI2cSlaveAddress),
(VOID *)&Req,
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 05/24] Silicon/Maxim: Add comments in Ds1307RtcLib
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (3 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 04/24] Silicon/Maxim: Fix bug in RtcWrite in Ds1307RtcLib Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 06/24] NXP/LS1043aRdb: Move Soc specific components to soc files Pankaj Bansal
` (19 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Add comments to explain the register read and write operation
on Ds1307. These comments have been referred from data sheet:
https://datasheets.maximintegrated.com/en/ds/DS1307.pdf
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
index fd7a8696e405..444e01124811 100644
--- a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
+++ b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
@@ -28,6 +28,11 @@ STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster;
/**
Read RTC register.
+ Data Read-Slave Transmitter Mode
+
+ <Slave Address> <Word Address (n)> <Slave Address> <Data(n)> <Data(n+1)> <Data(n+2)> <Data(n+X)>
+
+ The first byte is received and handled as in the slave receiver mode.
@param RtcRegAddr Register offset of RTC to be read.
@@ -69,6 +74,9 @@ RtcRead (
/**
Write RTC register.
+ Data Write-Slave Receiver Mode
+
+ <Slave Address> <Word Address (n)> <Data(n)> <Data(n+1)> <Data(n+X)>
@param RtcRegAddr Register offset of RTC to write.
@param Val Value to be written
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 06/24] NXP/LS1043aRdb: Move Soc specific components to soc files
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (4 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 05/24] Silicon/Maxim: Add comments " Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc lib Pankaj Bansal
` (18 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Soc specific components ought to be part of Soc files and not
platform files. move the same to SOC files
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Platform/NXP/NxpQoriqLs.dsc.inc | 2 ++
Silicon/NXP/LS1043A/LS1043A.dsc.inc | 7 ++++++-
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 7 +------
3 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/Platform/NXP/NxpQoriqLs.dsc.inc b/Platform/NXP/NxpQoriqLs.dsc.inc
index 25c0a41e5d4a..8fbd6288cfae 100644
--- a/Platform/NXP/NxpQoriqLs.dsc.inc
+++ b/Platform/NXP/NxpQoriqLs.dsc.inc
@@ -95,6 +95,8 @@
ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
I2cLib|Silicon/NXP/Library/I2cLib/I2cLib.inf
+ ResetSystemLib|ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
+ IoAccessLib|Silicon/NXP/Library/IoAccessLib/IoAccessLib.inf
[LibraryClasses.common.SEC]
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
diff --git a/Silicon/NXP/LS1043A/LS1043A.dsc.inc b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
index dbd680b0ad28..d2d4133428c3 100644
--- a/Silicon/NXP/LS1043A/LS1043A.dsc.inc
+++ b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
@@ -1,12 +1,16 @@
# LS1043A.dsc
# LS1043A Soc package.
#
-# Copyright 2017-2019 NXP
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
#
+[LibraryClasses.common]
+ SocLib|Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+ SerialPortLib|Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
+
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
@@ -20,6 +24,7 @@
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x01402000
[PcdsFixedAtBuild.common]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x021c0500
#
# CCSR Address Space and other attached Memories
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
index c8105593533f..802cccdce63b 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
@@ -2,7 +2,7 @@
#
# LS1043ARDB Board package.
#
-# Copyright 2017-2019 NXP
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -26,11 +26,7 @@
!include Silicon/NXP/LS1043A/LS1043A.dsc.inc
[LibraryClasses.common]
- SocLib|Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
ArmPlatformLib|Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
- ResetSystemLib|ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
- SerialPortLib|Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
- IoAccessLib|Silicon/NXP/Library/IoAccessLib/IoAccessLib.inf
RealTimeClockLib|Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
[PcdsFixedAtBuild.common]
@@ -46,7 +42,6 @@
#
# Board Specific Pcds
#
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x021c0500
gNxpQoriqLsTokenSpaceGuid.PcdSerdes2Enabled|FALSE
gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x1
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc lib
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (5 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 06/24] NXP/LS1043aRdb: Move Soc specific components to soc files Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-22 16:51 ` [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 08/24] Silicon/NXP: remove not needed components Pankaj Bansal
` (17 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The Soc info being printed can be removed from SOC lib.
We are in the process of implementing PEI Phase.
After PEI phase implementation this info would be printed in
common PEIM based on the information retrieved from PPIs.
e.g. gArmMpCoreInfoPpiGuid can be used to print cluser and
core info.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- remove CpuMaskNext definition
Silicon/NXP/Library/SocLib/NxpChassis.h | 26 +---
Silicon/NXP/Library/SocLib/Chassis.c | 144 --------------------
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 16 +--
3 files changed, 2 insertions(+), 184 deletions(-)
diff --git a/Silicon/NXP/Library/SocLib/NxpChassis.h b/Silicon/NXP/Library/SocLib/NxpChassis.h
index 99f6439d8f35..a11acf71563e 100644
--- a/Silicon/NXP/Library/SocLib/NxpChassis.h
+++ b/Silicon/NXP/Library/SocLib/NxpChassis.h
@@ -1,7 +1,7 @@
/** @file
* Header defining the Base addresses, sizes, flags etc for chassis 1
*
-* Copyright 2017-2019 NXP
+* Copyright 2017-2020 NXP
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -54,14 +54,6 @@ typedef struct {
UINTN SdhcClk;
} SOC_CLOCK_INFO;
-/*
- * Print Soc information
- */
-VOID
-PrintSoc (
- VOID
- );
-
/*
* Initialize Clock structure
*/
@@ -79,22 +71,6 @@ SmmuInit (
VOID
);
-/*
- * Print CPU information
- */
-VOID
-PrintCpuInfo (
- VOID
- );
-
-/*
- * Dump RCW (Reset Control Word) on console
- */
-VOID
-PrintRCW (
- VOID
- );
-
UINT32
InitiatorType (
IN UINT32 Cluster,
diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
index b8a8118c5e24..adca7b8dd413 100644
--- a/Silicon/NXP/Library/SocLib/Chassis.c
+++ b/Silicon/NXP/Library/SocLib/Chassis.c
@@ -204,79 +204,6 @@ QoriqCoreToType (
return EFI_NOT_FOUND; /* cannot identify the cluster */
}
-STATIC
-UINTN
-CpuMaskNext (
- IN UINTN Cpu,
- IN UINTN Mask
- )
-{
- for (Cpu++; !((1 << Cpu) & Mask); Cpu++);
-
- return Cpu;
-}
-
-/*
- * Print CPU information
- */
-VOID
-PrintCpuInfo (
- VOID
- )
-{
- SYS_INFO SysInfo;
- UINTN CoreIndex;
- UINTN Core;
- UINT32 Type;
- UINT32 NumCpus;
- UINT32 Mask;
- CHAR8 *CoreName;
-
- GetSysInfo (&SysInfo);
- DEBUG ((DEBUG_INIT, "Clock Configuration:"));
-
- NumCpus = CpuNumCores ();
- Mask = CpuMask ();
-
- for (CoreIndex = 0, Core = CpuMaskNext(-1, Mask);
- CoreIndex < NumCpus;
- CoreIndex++, Core = CpuMaskNext(Core, Mask))
- {
- if (!(CoreIndex % 3)) {
- DEBUG ((DEBUG_INIT, "\n "));
- }
-
- Type = TP_ITYP_VERSION (QoriqCoreToType (Core));
- switch (Type) {
- case TY_ITYP_VERSION_A7:
- CoreName = "A7";
- break;
- case TY_ITYP_VERSION_A53:
- CoreName = "A53";
- break;
- case TY_ITYP_VERSION_A57:
- CoreName = "A57";
- break;
- case TY_ITYP_VERSION_A72:
- CoreName = "A72";
- break;
- default:
- CoreName = " Unknown Core ";
- }
- DEBUG ((DEBUG_INIT, "CPU%d(%a):%-4d MHz ",
- Core, CoreName, SysInfo.FreqProcessor[Core] / MHZ));
- }
-
- DEBUG ((DEBUG_INIT, "\n Bus: %-4d MHz ", SysInfo.FreqSystemBus / MHZ));
- DEBUG ((DEBUG_INIT, "DDR: %-4d MT/s", SysInfo.FreqDdrBus / MHZ));
-
- if (SysInfo.FreqFman[0] != 0) {
- DEBUG ((DEBUG_INIT, "\n FMAN: %-4d MHz ", SysInfo.FreqFman[0] / MHZ));
- }
-
- DEBUG ((DEBUG_INIT, "\n"));
-}
-
/*
* Return system bus frequency
*/
@@ -307,77 +234,6 @@ GetSdxcFrequency (
return SocSysInfo.FreqSdhc;
}
-/*
- * Print Soc information
- */
-VOID
-PrintSoc (
- VOID
- )
-{
- CHAR8 Buf[20];
- CCSR_GUR *GurBase;
- UINTN Count;
- //
- // Svr : System Version Register
- //
- UINTN Svr;
- UINTN Ver;
-
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
-
- Svr = GurRead ((UINTN)&GurBase->Svr);
- Ver = SVR_SOC_VER (Svr);
-
- for (Count = 0; Count < ARRAY_SIZE (mCpuTypeList); Count++) {
- if ((mCpuTypeList[Count].SocVer & SVR_WO_E) == Ver) {
- AsciiStrCpyS (Buf, sizeof (Buf), mCpuTypeList[Count].Name);
-
- if (IS_E_PROCESSOR (Svr)) {
- AsciiStrCatS (Buf, sizeof (Buf), "E");
- }
- break;
- }
- }
-
- DEBUG ((DEBUG_INFO, "SoC: %a (0x%x); Rev %d.%d\n",
- Buf, Svr, SVR_MAJOR (Svr), SVR_MINOR (Svr)));
-
- return;
-}
-
-/*
- * Dump RCW (Reset Control Word) on console
- */
-VOID
-PrintRCW (
- VOID
- )
-{
- CCSR_GUR *Base;
- UINTN Count;
-
- Base = (VOID *)PcdGet64 (PcdGutsBaseAddr);
-
- /*
- * Display the RCW, so that no one gets confused as to what RCW
- * we're actually using for this boot.
- */
-
- DEBUG ((DEBUG_INIT, "Reset Configuration Word (RCW):"));
- for (Count = 0; Count < ARRAY_SIZE (Base->RcwSr); Count++) {
- UINT32 Rcw = SwapMmioRead32 ((UINTN)&Base->RcwSr[Count]);
-
- if ((Count % 4) == 0) {
- DEBUG ((DEBUG_INIT, "\n %08x:", Count * 4));
- }
-
- DEBUG ((DEBUG_INIT, " %08x", Rcw));
- }
-
- DEBUG ((DEBUG_INIT, "\n"));
-}
-
/*
* Setup SMMU in bypass mode
* and also set its pagesize
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
index bfb8b8cb339a..687a1d940066 100644
--- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
+++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
@@ -1,7 +1,7 @@
/** @Soc.c
SoC specific Library containg functions to initialize various SoC components
- Copyright 2017-2019 NXP
+ Copyright 2017-2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -131,10 +131,6 @@ GetSysInfo (
/**
Function to initialize SoC specific constructs
- CPU Info
- SoC Personality
- Board Personality
- RCW prints
**/
VOID
SocInit (
@@ -147,16 +143,6 @@ SocInit (
// Early init serial Port to get board information.
//
SerialPortInitialize ();
- DEBUG ((DEBUG_INIT, "\nUEFI firmware (version %s built at %a on %a)\n",
- (CHAR16*)PcdGetPtr (PcdFirmwareVersionString), __TIME__, __DATE__));
-
- PrintCpuInfo ();
-
- //
- // Print Reset control Word
- //
- PrintRCW ();
- PrintSoc ();
return;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 08/24] Silicon/NXP: remove not needed components
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (6 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc lib Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 09/24] Silicon/NXP: Remove unnecessary PCDs Pankaj Bansal
` (16 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The structures elements and functions that are not necessary for booting
for now are being deleted.
Once the directory structure has been changed (i.e. we have clear
distinction between chassis code and header files and SOC code and header
files), we will put back the code and
structure components back at their appropriate respective place.
Also right now all the elements are being defined in structures, which are
not being used right now. So to simplify the code restructuring, I have
removed those for now. When we need to use those elements, we can define
those one by one.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- remove CpuMaskNext from this patch and put in previous patch
Silicon/NXP/NxpQoriqLs.dec | 27 --
Silicon/NXP/LS1043A/LS1043A.dsc.inc | 6 -
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 4 -
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 7 +-
Silicon/NXP/Include/Chassis2/LsSerDes.h | 62 ----
Silicon/NXP/Include/Chassis2/NxpSoc.h | 314 +-------------------
Silicon/NXP/LS1043A/Include/SocSerDes.h | 51 ----
Silicon/NXP/Library/SocLib/NxpChassis.h | 90 ------
Silicon/NXP/Library/SocLib/Chassis.c | 208 -------------
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 79 -----
Silicon/NXP/Library/SocLib/SerDes.c | 268 -----------------
11 files changed, 3 insertions(+), 1113 deletions(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index 4a1cfb3e278e..943dbac81013 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -32,10 +32,7 @@
# Pcds for base address and size
#
gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr|0x0|UINT64|0x00000100
- gNxpQoriqLsTokenSpaceGuid.PcdPiFdSize|0x0|UINT32|0x00000101
- gNxpQoriqLsTokenSpaceGuid.PcdPiFdBaseAddress|0x0|UINT64|0x00000102
gNxpQoriqLsTokenSpaceGuid.PcdClkBaseAddr|0x0|UINT64|0x00000103
- gNxpQoriqLsTokenSpaceGuid.PcdWatchdog1BaseAddr|0x0|UINT64|0x00000104
gNxpQoriqLsTokenSpaceGuid.PcdDdrBaseAddr|0x0|UINT64|0x00000105
gNxpQoriqLsTokenSpaceGuid.PcdSdxcBaseAddr|0x0|UINT64|0x00000106
gNxpQoriqLsTokenSpaceGuid.PcdScfgBaseAddr|0x0|UINT64|0x00000107
@@ -61,10 +58,6 @@
gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionSize|0x0|UINT64|0x0000011B
gNxpQoriqLsTokenSpaceGuid.PcdQspiRegion2BaseAddr|0x0|UINT64|0x0000011C
gNxpQoriqLsTokenSpaceGuid.PcdQspiRegion2Size|0x0|UINT64|0x0000011D
- gNxpQoriqLsTokenSpaceGuid.PcdSystemMemoryExBase|0x0|UINT64|0x0000011E
- gNxpQoriqLsTokenSpaceGuid.PcdSystemMemoryExSize|0x0|UINT64|0x0000011F
- gNxpQoriqLsTokenSpaceGuid.PcdUsbBaseAddr|0x0|UINT32|0x00000120
- gNxpQoriqLsTokenSpaceGuid.PcdUsbSize|0x0|UINT32|0x00000121
gNxpQoriqLsTokenSpaceGuid.PcdCcsrBaseAddr|0x0|UINT64|0x00000122
gNxpQoriqLsTokenSpaceGuid.PcdCcsrSize|0x0|UINT64|0x00000123
@@ -75,36 +68,16 @@
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1Size|0x0|UINT64|0x00000191
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2BaseAddr|0x0|UINT64|0x00000192
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2Size|0x0|UINT64|0x00000193
- gNxpQoriqLsTokenSpaceGuid.PcdIfcNandReservedSize|0x0|UINT32|0x00000194
- gNxpQoriqLsTokenSpaceGuid.PcdFlashDeviceBase64|0x0|UINT64|0x00000195
- gNxpQoriqLsTokenSpaceGuid.PcdFlashReservedRegionBase64|0x0|UINT64|0x00000196
-
- #
- # NV Pcd
- #
- gNxpQoriqLsTokenSpaceGuid.PcdNvFdBase|0x0|UINT64|0x00000210
- gNxpQoriqLsTokenSpaceGuid.PcdNvFdSize|0x0|UINT64|0x00000211
#
# Platform PCDs
#
gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x0|UINT32|0x00000250
- gNxpQoriqLsTokenSpaceGuid.PcdSerdes2Enabled|FALSE|BOOLEAN|0x00000251
-
- #
- # Clock PCDs
- #
- gNxpQoriqLsTokenSpaceGuid.PcdSysClk|0x0|UINT64|0x000002A0
- gNxpQoriqLsTokenSpaceGuid.PcdDdrClk|0x0|UINT64|0x000002A1
#
# Pcds to support Big Endian IPs
#
- gNxpQoriqLsTokenSpaceGuid.PcdMmcBigEndian|FALSE|BOOLEAN|0x0000310
gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian|FALSE|BOOLEAN|0x0000311
- gNxpQoriqLsTokenSpaceGuid.PcdPciLutBigEndian|FALSE|BOOLEAN|0x00000312
- gNxpQoriqLsTokenSpaceGuid.PcdWatchdogBigEndian|FALSE|BOOLEAN|0x00000313
- gNxpQoriqLsTokenSpaceGuid.PcdIfcBigEndian|FALSE|BOOLEAN|0x00000314
[PcdsFeatureFlag]
gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203|FALSE|BOOLEAN|0x00000315
diff --git a/Silicon/NXP/LS1043A/LS1043A.dsc.inc b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
index d2d4133428c3..f6ada08dad9d 100644
--- a/Silicon/NXP/LS1043A/LS1043A.dsc.inc
+++ b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
@@ -31,12 +31,10 @@
#
gNxpQoriqLsTokenSpaceGuid.PcdCcsrBaseAddr|0x01000000
gNxpQoriqLsTokenSpaceGuid.PcdCcsrSize|0x0F000000
- gNxpQoriqLsTokenSpaceGuid.PcdClkBaseAddr|0x01EE1000
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1BaseAddr|0x60000000
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1Size|0x20000000
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2BaseAddr|0x0620000000
gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2Size|0x00E0000000
- gNxpQoriqLsTokenSpaceGuid.PcdIfcNandReservedSize|0x2EA
gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpBaseAddr|0x0500000000
gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpSize|0x0080000000
gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpBaseAddr|0x0508000000
@@ -47,10 +45,7 @@
gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseSize|0x800000000
gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseAddr|0x5000000000
gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseSize|0x800000000
- gNxpQoriqLsTokenSpaceGuid.PcdScfgBaseAddr|0x1570000
gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr|0x01EE0000
- gNxpQoriqLsTokenSpaceGuid.PcdWatchdog1BaseAddr|0x02AD0000
- gNxpQoriqLsTokenSpaceGuid.PcdSdxcBaseAddr|0x01560000
gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr|0x02180000
gNxpQoriqLsTokenSpaceGuid.PcdI2cSize|0x10000
gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController|4
@@ -61,6 +56,5 @@
# Big Endian IPs
#
gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian|TRUE
- gNxpQoriqLsTokenSpaceGuid.PcdWatchdogBigEndian|TRUE
##
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
index 802cccdce63b..385b6e067e26 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
@@ -39,10 +39,6 @@
gArmTokenSpaceGuid.PcdSystemMemorySize|0x7BE00000
gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
- #
- # Board Specific Pcds
- #
- gNxpQoriqLsTokenSpaceGuid.PcdSerdes2Enabled|FALSE
gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x1
#
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
index cb670a12797e..f75a8d19f5a5 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
@@ -1,6 +1,6 @@
# @file
#
-# Copyright 2017-2019 NXP
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -18,7 +18,6 @@
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
Silicon/NXP/NxpQoriqLs.dec
- Silicon/NXP/LS1043A/LS1043A.dec
[LibraryClasses]
ArmSmcLib
@@ -30,16 +29,12 @@
[Sources.common]
Chassis.c
Chassis2/Soc.c
- SerDes.c
[BuildOptions]
GCC:*_*_*_CC_FLAGS = -DCHASSIS2
[FixedPcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
- gNxpQoriqLsTokenSpaceGuid.PcdClkBaseAddr
gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian
gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr
gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
- gNxpQoriqLsTokenSpaceGuid.PcdScfgBaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdSerdes2Enabled
diff --git a/Silicon/NXP/Include/Chassis2/LsSerDes.h b/Silicon/NXP/Include/Chassis2/LsSerDes.h
deleted file mode 100644
index 9afbc522398a..000000000000
--- a/Silicon/NXP/Include/Chassis2/LsSerDes.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/** LsSerDes.h
- The Header file of SerDes Module for Chassis 2
-
- Copyright 2017-2019 NXP
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef LS_SERDES_H_
-#define LS_SERDES_H_
-
-#include <Uefi/UefiBaseType.h>
-
-#define SRDS_MAX_LANES 4
-
-typedef enum {
- None = 0,
- Pcie1,
- Pcie2,
- Pcie3,
- Sata,
- SgmiiFm1Dtsec1,
- SgmiiFm1Dtsec2,
- SgmiiFm1Dtsec5,
- SgmiiFm1Dtsec6,
- SgmiiFm1Dtsec9,
- SgmiiFm1Dtsec10,
- QsgmiiFm1A,
- XfiFm1Mac9,
- XfiFm1Mac10,
- Sgmii2500Fm1Dtsec2,
- Sgmii2500Fm1Dtsec5,
- Sgmii2500Fm1Dtsec9,
- Sgmii2500Fm1Dtsec10,
- SerdesPrtclCount
-} SERDES_PROTOCOL;
-
-typedef enum {
- Srds1 = 0,
- Srds2,
- SrdsMaxNum
-} SERDES_NUMBER;
-
-typedef struct {
- UINT16 Protocol;
- UINT8 SrdsLane[SRDS_MAX_LANES];
-} SERDES_CONFIG;
-
-typedef VOID
-(*SERDES_PROBE_LANES_CALLBACK) (
- IN SERDES_PROTOCOL LaneProtocol,
- IN VOID *Arg
- );
-
-VOID
-SerDesProbeLanes(
- IN SERDES_PROBE_LANES_CALLBACK SerDesLaneProbeCallback,
- IN VOID *Arg
- );
-
-#endif /* LS_SERDES_H_ */
diff --git a/Silicon/NXP/Include/Chassis2/NxpSoc.h b/Silicon/NXP/Include/Chassis2/NxpSoc.h
index f05a813750e8..74330b6205e7 100644
--- a/Silicon/NXP/Include/Chassis2/NxpSoc.h
+++ b/Silicon/NXP/Include/Chassis2/NxpSoc.h
@@ -1,7 +1,7 @@
/** Soc.h
* Header defining the Base addresses, sizes, flags etc for chassis 1
*
-* Copyright 2017-2019 NXP
+* Copyright 2017-2020 NXP
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -10,22 +10,7 @@
#ifndef NXP_SOC_H_
#define NXP_SOC_H_
-#define HWA_CGA_M1_CLK_SEL 0xe0000000
-#define HWA_CGA_M1_CLK_SHIFT 29
-
-#define TP_CLUSTER_EOC_MASK 0xc0000000 /* end of clusters mask */
-#define NUM_CC_PLLS 2
#define CLK_FREQ 100000000
-#define MAX_CPUS 4
-#define NUM_FMAN 1
-#define CHECK_CLUSTER(Cluster) ((Cluster & TP_CLUSTER_EOC_MASK) == 0x0)
-
-/* RCW SERDES MACRO */
-#define RCWSR_INDEX 4
-#define RCWSR_SRDS1_PRTCL_MASK 0xffff0000
-#define RCWSR_SRDS1_PRTCL_SHIFT 16
-#define RCWSR_SRDS2_PRTCL_MASK 0x0000ffff
-#define RCWSR_SRDS2_PRTCL_SHIFT 0
/* SMMU Defintions */
#define SMMU_BASE_ADDR 0x09000000
@@ -41,312 +26,17 @@
#define IDR1_PAGESIZE_MASK 0x80000000
typedef struct {
- UINTN FreqProcessor[MAX_CPUS];
UINTN FreqSystemBus;
- UINTN FreqDdrBus;
- UINTN FreqLocalBus;
- UINTN FreqSdhc;
- UINTN FreqFman[NUM_FMAN];
- UINTN FreqQman;
} SYS_INFO;
/* Device Configuration and Pin Control */
typedef struct {
- UINT32 PorSr1; /* POR status 1 */
-#define CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000
- UINT32 PorSr2; /* POR status 2 */
- UINT8 Res008[0x20-0x8];
- UINT32 GppOrCr1; /* General-purpose POR configuration */
- UINT32 GppOrCr2;
- UINT32 DcfgFuseSr; /* Fuse status register */
- UINT8 Res02c[0x70-0x2c];
- UINT32 DevDisr; /* Device disable control */
- UINT32 DevDisr2; /* Device disable control 2 */
- UINT32 DevDisr3; /* Device disable control 3 */
- UINT32 DevDisr4; /* Device disable control 4 */
- UINT32 DevDisr5; /* Device disable control 5 */
- UINT32 DevDisr6; /* Device disable control 6 */
- UINT32 DevDisr7; /* Device disable control 7 */
- UINT8 Res08c[0x94-0x8c];
- UINT32 CoreDisrU; /* uppper portion for support of 64 cores */
- UINT32 CoreDisrL; /* lower portion for support of 64 cores */
- UINT8 Res09c[0xa0-0x9c];
- UINT32 Pvr; /* Processor version */
- UINT32 Svr; /* System version */
- UINT32 Mvr; /* Manufacturing version */
- UINT8 Res0ac[0xb0-0xac];
- UINT32 RstCr; /* Reset control */
- UINT32 RstRqPblSr; /* Reset request preboot loader status */
- UINT8 Res0b8[0xc0-0xb8];
- UINT32 RstRqMr1; /* Reset request mask */
- UINT8 Res0c4[0xc8-0xc4];
- UINT32 RstRqSr1; /* Reset request status */
- UINT8 Res0cc[0xd4-0xcc];
- UINT32 RstRqWdTmrL; /* Reset request WDT mask */
- UINT8 Res0d8[0xdc-0xd8];
- UINT32 RstRqWdtSrL; /* Reset request WDT status */
- UINT8 Res0e0[0xe4-0xe0];
- UINT32 BrrL; /* Boot release */
- UINT8 Res0e8[0x100-0xe8];
+ UINT8 Res0[0x100-0x00];
UINT32 RcwSr[16]; /* Reset control word status */
#define CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25
#define CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
-#define CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT 16
-#define CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f
- UINT8 Res140[0x200-0x140];
- UINT32 ScratchRw[4]; /* Scratch Read/Write */
- UINT8 Res210[0x300-0x210];
- UINT32 ScratcHw1R[4]; /* Scratch Read (Write once) */
- UINT8 Res310[0x400-0x310];
- UINT32 CrstSr[12];
- UINT8 Res430[0x500-0x430];
- /* PCI Express n Logical I/O Device Number register */
- UINT32 DcfgCcsrPex1LiodNr;
- UINT32 DcfgCcsrPex2LiodNr;
- UINT32 DcfgCcsrPex3LiodNr;
- UINT32 DcfgCcsrPex4LiodNr;
- /* RIO n Logical I/O Device Number register */
- UINT32 DcfgCcsrRio1LiodNr;
- UINT32 DcfgCcsrRio2LiodNr;
- UINT32 DcfgCcsrRio3LiodNr;
- UINT32 DcfgCcsrRio4LiodNr;
- /* USB Logical I/O Device Number register */
- UINT32 DcfgCcsrUsb1LiodNr;
- UINT32 DcfgCcsrUsb2LiodNr;
- UINT32 DcfgCcsrUsb3LiodNr;
- UINT32 DcfgCcsrUsb4LiodNr;
- /* SD/MMC Logical I/O Device Number register */
- UINT32 DcfgCcsrSdMmc1LiodNr;
- UINT32 DcfgCcsrSdMmc2LiodNr;
- UINT32 DcfgCcsrSdMmc3LiodNr;
- UINT32 DcfgCcsrSdMmc4LiodNr;
- /* RIO Message Unit Logical I/O Device Number register */
- UINT32 DcfgCcsrRiomaintLiodNr;
- UINT8 Res544[0x550-0x544];
- UINT32 SataLiodNr[4];
- UINT8 Res560[0x570-0x560];
- UINT32 DcfgCcsrMisc1LiodNr;
- UINT32 DcfgCcsrMisc2LiodNr;
- UINT32 DcfgCcsrMisc3LiodNr;
- UINT32 DcfgCcsrMisc4LiodNr;
- UINT32 DcfgCcsrDma1LiodNr;
- UINT32 DcfgCcsrDma2LiodNr;
- UINT32 DcfgCcsrDma3LiodNr;
- UINT32 DcfgCcsrDma4LiodNr;
- UINT32 DcfgCcsrSpare1LiodNr;
- UINT32 DcfgCcsrSpare2LiodNr;
- UINT32 DcfgCcsrSpare3LiodNr;
- UINT32 DcfgCcsrSpare4LiodNr;
- UINT8 Res5a0[0x600-0x5a0];
- UINT32 DcfgCcsrPblSr;
- UINT32 PamuBypENr;
- UINT32 DmaCr1;
- UINT8 Res60c[0x610-0x60c];
- UINT32 DcfgCcsrGenSr1;
- UINT32 DcfgCcsrGenSr2;
- UINT32 DcfgCcsrGenSr3;
- UINT32 DcfgCcsrGenSr4;
- UINT32 DcfgCcsrGenCr1;
- UINT32 DcfgCcsrGenCr2;
- UINT32 DcfgCcsrGenCr3;
- UINT32 DcfgCcsrGenCr4;
- UINT32 DcfgCcsrGenCr5;
- UINT32 DcfgCcsrGenCr6;
- UINT32 DcfgCcsrGenCr7;
- UINT8 Res63c[0x658-0x63c];
- UINT32 DcfgCcsrcGenSr1;
- UINT32 DcfgCcsrcGenSr0;
- UINT8 Res660[0x678-0x660];
- UINT32 DcfgCcsrcGenCr1;
- UINT32 DcfgCcsrcGenCr0;
- UINT8 Res680[0x700-0x680];
- UINT32 DcfgCcsrSrIoPstecr;
- UINT32 DcfgCcsrDcsrCr;
- UINT8 Res708[0x740-0x708]; /* add more registers when needed */
- UINT32 TpItyp[64]; /* Topology Initiator Type Register */
- struct {
- UINT32 Upper;
- UINT32 Lower;
- } TpCluster[16];
- UINT8 Res8c0[0xa00-0x8c0]; /* add more registers when needed */
- UINT32 DcfgCcsrQmBmWarmRst;
- UINT8 Resa04[0xa20-0xa04]; /* add more registers when needed */
- UINT32 DcfgCcsrReserved0;
- UINT32 DcfgCcsrReserved1;
} CCSR_GUR;
-/* Supplemental Configuration Unit */
-typedef struct {
- UINT8 Res000[0x070-0x000];
- UINT32 Usb1Prm1Cr;
- UINT32 Usb1Prm2Cr;
- UINT32 Usb1Prm3Cr;
- UINT32 Usb2Prm1Cr;
- UINT32 Usb2Prm2Cr;
- UINT32 Usb2Prm3Cr;
- UINT32 Usb3Prm1Cr;
- UINT32 Usb3Prm2Cr;
- UINT32 Usb3Prm3Cr;
- UINT8 Res094[0x100-0x094];
- UINT32 Usb2Icid;
- UINT32 Usb3Icid;
- UINT8 Res108[0x114-0x108];
- UINT32 DmaIcid;
- UINT32 SataIcid;
- UINT32 Usb1Icid;
- UINT32 QeIcid;
- UINT32 SdhcIcid;
- UINT32 EdmaIcid;
- UINT32 EtrIcid;
- UINT32 Core0SftRst;
- UINT32 Core1SftRst;
- UINT32 Core2SftRst;
- UINT32 Core3SftRst;
- UINT8 Res140[0x158-0x140];
- UINT32 AltCBar;
- UINT32 QspiCfg;
- UINT8 Res160[0x180-0x160];
- UINT32 DmaMcr;
- UINT8 Res184[0x188-0x184];
- UINT32 GicAlign;
- UINT32 DebugIcid;
- UINT8 Res190[0x1a4-0x190];
- UINT32 SnpCnfGcr;
-#define CCSR_SCFG_SNPCNFGCR_SECRDSNP BIT31
-#define CCSR_SCFG_SNPCNFGCR_SECWRSNP BIT30
-#define CCSR_SCFG_SNPCNFGCR_SATARDSNP BIT23
-#define CCSR_SCFG_SNPCNFGCR_SATAWRSNP BIT22
-#define CCSR_SCFG_SNPCNFGCR_USB1RDSNP BIT21
-#define CCSR_SCFG_SNPCNFGCR_USB1WRSNP BIT20
-#define CCSR_SCFG_SNPCNFGCR_USB2RDSNP BIT15
-#define CCSR_SCFG_SNPCNFGCR_USB2WRSNP BIT16
-#define CCSR_SCFG_SNPCNFGCR_USB3RDSNP BIT13
-#define CCSR_SCFG_SNPCNFGCR_USB3WRSNP BIT14
- UINT8 Res1a8[0x1ac-0x1a8];
- UINT32 IntpCr;
- UINT8 Res1b0[0x204-0x1b0];
- UINT32 CoreSrEnCr;
- UINT8 Res208[0x220-0x208];
- UINT32 RvBar00;
- UINT32 RvBar01;
- UINT32 RvBar10;
- UINT32 RvBar11;
- UINT32 RvBar20;
- UINT32 RvBar21;
- UINT32 RvBar30;
- UINT32 RvBar31;
- UINT32 LpmCsr;
- UINT8 Res244[0x400-0x244];
- UINT32 QspIdQScr;
- UINT32 EcgTxcMcr;
- UINT32 SdhcIoVSelCr;
- UINT32 RcwPMuxCr0;
- /**Setting RCW PinMux Register bits 17-19 to select USB2_DRVVBUS
- *Setting RCW PinMux Register bits 21-23 to select USB2_PWRFAULT
- *Setting RCW PinMux Register bits 25-27 to select USB3_DRVVBUS
- Setting RCW PinMux Register bits 29-31 to select USB3_DRVVBUS*/
-#define CCSR_SCFG_RCWPMUXCRO_SELCR_USB 0x3333
- /**Setting RCW PinMux Register bits 17-19 to select USB2_DRVVBUS
- *Setting RCW PinMux Register bits 21-23 to select USB2_PWRFAULT
- *Setting RCW PinMux Register bits 25-27 to select IIC4_SCL
- Setting RCW PinMux Register bits 29-31 to select IIC4_SDA*/
-#define CCSR_SCFG_RCWPMUXCRO_NOT_SELCR_USB 0x3300
- UINT32 UsbDrvVBusSelCr;
-#define CCSR_SCFG_USBDRVVBUS_SELCR_USB1 0x00000000
-#define CCSR_SCFG_USBDRVVBUS_SELCR_USB2 0x00000001
-#define CCSR_SCFG_USBDRVVBUS_SELCR_USB3 0x00000003
- UINT32 UsbPwrFaultSelCr;
-#define CCSR_SCFG_USBPWRFAULT_INACTIVE 0x00000000
-#define CCSR_SCFG_USBPWRFAULT_SHARED 0x00000001
-#define CCSR_SCFG_USBPWRFAULT_DEDICATED 0x00000002
-#define CCSR_SCFG_USBPWRFAULT_USB3_SHIFT 4
-#define CCSR_SCFG_USBPWRFAULT_USB2_SHIFT 2
-#define CCSR_SCFG_USBPWRFAULT_USB1_SHIFT 0
- UINT32 UsbRefclkSelcr1;
- UINT32 UsbRefclkSelcr2;
- UINT32 UsbRefclkSelcr3;
- UINT8 Res424[0x600-0x424];
- UINT32 ScratchRw[4];
- UINT8 Res610[0x680-0x610];
- UINT32 CoreBCr;
- UINT8 Res684[0x1000-0x684];
- UINT32 Pex1MsiIr;
- UINT32 Pex1MsiR;
- UINT8 Res1008[0x2000-0x1008];
- UINT32 Pex2;
- UINT32 Pex2MsiR;
- UINT8 Res2008[0x3000-0x2008];
- UINT32 Pex3MsiIr;
- UINT32 Pex3MsiR;
-} CCSR_SCFG;
-
-#define USB_TXVREFTUNE 0x9
-#define USB_SQRXTUNE 0xFC7FFFFF
-#define USB_PCSTXSWINGFULL 0x47
-#define USB_PHY_RX_EQ_VAL_1 0x0000
-#define USB_PHY_RX_EQ_VAL_2 0x8000
-#define USB_PHY_RX_EQ_VAL_3 0x8003
-#define USB_PHY_RX_EQ_VAL_4 0x800b
-
-/*USB_PHY_SS memory map*/
-typedef struct {
- UINT16 IpIdcodeLo;
- UINT16 SupIdcodeHi;
- UINT8 Res4[0x0006-0x0004];
- UINT16 RtuneDebug;
- UINT16 RtuneStat;
- UINT16 SupSsPhase;
- UINT16 SsFreq;
- UINT8 ResE[0x0020-0x000e];
- UINT16 Ateovrd;
- UINT16 MpllOvrdInLo;
- UINT8 Res24[0x0026-0x0024];
- UINT16 SscOvrdIn;
- UINT8 Res28[0x002A-0x0028];
- UINT16 LevelOvrdIn;
- UINT8 Res2C[0x0044-0x002C];
- UINT16 ScopeCount;
- UINT8 Res46[0x0060-0x0046];
- UINT16 MpllLoopCtl;
- UINT8 Res62[0x006C-0x0062];
- UINT16 SscClkCntrl;
- UINT8 Res6E[0x2002-0x006E];
- UINT16 Lane0TxOvrdInHi;
- UINT16 Lane0TxOvrdDrvLo;
- UINT8 Res2006[0x200C-0x2006];
- UINT16 Lane0RxOvrdInHi;
- UINT8 Res200E[0x2022-0x200E];
- UINT16 Lane0TxCmWaitTimeOvrd;
- UINT8 Res2024[0x202A-0x2024];
- UINT16 Lane0TxLbertCtl;
- UINT16 Lane0RxLbertCtl;
- UINT16 Lane0RxLbertErr;
- UINT8 Res2030[0x205A-0x2030];
- UINT16 Lane0TxAltBlock;
-} CCSR_USB_PHY;
-
-/* Clocking */
-typedef struct {
- struct {
- UINT32 ClkCnCSr; /* core cluster n clock control status */
- UINT8 Res004[0x0c];
- UINT32 ClkcGHwAcSr; /* Clock generator n hardware accelerator */
- UINT8 Res014[0x0c];
- } ClkcSr[4];
- UINT8 Res040[0x780]; /* 0x100 */
- struct {
- UINT32 PllCnGSr;
- UINT8 Res804[0x1c];
- } PllCgSr[NUM_CC_PLLS];
- UINT8 Res840[0x1c0];
- UINT32 ClkPCSr; /* 0xa00 Platform clock domain control/status */
- UINT8 Resa04[0x1fc];
- UINT32 PllPGSr; /* 0xc00 Platform PLL General Status */
- UINT8 Resc04[0x1c];
- UINT32 PllDGSr; /* 0xc20 DDR PLL General Status */
- UINT8 Resc24[0x3dc];
-} CCSR_CLOCK;
-
VOID
GetSysInfo (
OUT SYS_INFO *
diff --git a/Silicon/NXP/LS1043A/Include/SocSerDes.h b/Silicon/NXP/LS1043A/Include/SocSerDes.h
deleted file mode 100644
index 2d1c6f10f932..000000000000
--- a/Silicon/NXP/LS1043A/Include/SocSerDes.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/** @file
- The Header file of SerDes Module for LS1043A
-
- Copyright 2017-2019 NXP
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef SOC_SERDES_H_
-#define SOC_SERDES_H_
-
-#ifdef CHASSIS2
-#include <Chassis2/LsSerDes.h>
-#endif
-
-SERDES_CONFIG SerDes1ConfigTbl[] = {
- /* SerDes 1 */
- {0x1555, {XfiFm1Mac9, Pcie1, Pcie2, Pcie3 } },
- {0x2555, {Sgmii2500Fm1Dtsec9, Pcie1, Pcie2, Pcie3 } },
- {0x4555, {QsgmiiFm1A, Pcie1, Pcie2, Pcie3 } },
- {0x4558, {QsgmiiFm1A, Pcie1, Pcie2, Sata } },
- {0x1355, {XfiFm1Mac9, SgmiiFm1Dtsec2, Pcie2, Pcie3 } },
- {0x2355, {Sgmii2500Fm1Dtsec9, SgmiiFm1Dtsec2, Pcie2, Pcie3 } },
- {0x3335, {SgmiiFm1Dtsec9, SgmiiFm1Dtsec2, SgmiiFm1Dtsec5, Pcie3 } },
- {0x3355, {SgmiiFm1Dtsec9, SgmiiFm1Dtsec2, Pcie2, Pcie3 } },
- {0x3358, {SgmiiFm1Dtsec9, SgmiiFm1Dtsec2, Pcie2, Sata } },
- {0x3555, {SgmiiFm1Dtsec9, Pcie1, Pcie2, Pcie3 } },
- {0x3558, {SgmiiFm1Dtsec9, Pcie1, Pcie2, Sata } },
- {0x7000, {Pcie1, Pcie1, Pcie1, Pcie1 } },
- {0x9998, {Pcie1, Pcie2, Pcie3, Sata } },
- {0x6058, {Pcie1, Pcie1, Pcie2, Sata } },
- {0x1455, {XfiFm1Mac9, QsgmiiFm1A, Pcie2, Pcie3 } },
- {0x2455, {Sgmii2500Fm1Dtsec9, QsgmiiFm1A, Pcie2, Pcie3 } },
- {0x2255, {Sgmii2500Fm1Dtsec9, Sgmii2500Fm1Dtsec2, Pcie2, Pcie3 } },
- {0x3333, {SgmiiFm1Dtsec9, SgmiiFm1Dtsec2, SgmiiFm1Dtsec5, SgmiiFm1Dtsec6 } },
- {0x1460, {XfiFm1Mac9, QsgmiiFm1A, Pcie3, Pcie3 } },
- {0x2460, {Sgmii2500Fm1Dtsec9, QsgmiiFm1A, Pcie3, Pcie3 } },
- {0x3460, {SgmiiFm1Dtsec9, QsgmiiFm1A, Pcie3, Pcie3 } },
- {0x3455, {SgmiiFm1Dtsec9, QsgmiiFm1A, Pcie2, Pcie3 } },
- {0x9960, {Pcie1, Pcie2, Pcie3, Pcie3 } },
- {0x2233, {Sgmii2500Fm1Dtsec9, SgmiiFm1Dtsec2, SgmiiFm1Dtsec5, SgmiiFm1Dtsec6 }},
- {0x2533, {Sgmii2500Fm1Dtsec9, Pcie1, SgmiiFm1Dtsec5, SgmiiFm1Dtsec6 } },
- {}
-};
-
-SERDES_CONFIG *SerDesConfigTbl[] = {
- SerDes1ConfigTbl
-};
-
-#endif /* SOC_SERDES_H_ */
diff --git a/Silicon/NXP/Library/SocLib/NxpChassis.h b/Silicon/NXP/Library/SocLib/NxpChassis.h
index a11acf71563e..836df103f80f 100644
--- a/Silicon/NXP/Library/SocLib/NxpChassis.h
+++ b/Silicon/NXP/Library/SocLib/NxpChassis.h
@@ -10,58 +10,6 @@
#ifndef NXP_CHASSIS_H_
#define NXP_CHASSIS_H_
-#define TP_ITYP_AV_MASK 0x00000001 /* Initiator available */
-#define TP_ITYP_TYPE_MASK(x) (((x) & 0x6) >> 1) /* Initiator Type */
-#define TP_ITYP_TYPE_ARM 0x0
-#define TP_ITYP_TYPE_PPC 0x1
-#define TP_ITYP_TYPE_OTHER 0x2 /* StarCore DSP */
-#define TP_ITYP_TYPE_HA 0x3 /* HW Accelerator */
-#define TP_ITYP_THDS(x) (((x) & 0x18) >> 3) /* # threads */
-#define TP_ITYP_VERSION(x) (((x) & 0xe0) >> 5) /* Initiator Version */
-#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
-#define TP_INIT_PER_CLUSTER 4
-
-#define TY_ITYP_VERSION_A7 0x1
-#define TY_ITYP_VERSION_A53 0x2
-#define TY_ITYP_VERSION_A57 0x3
-#define TY_ITYP_VERSION_A72 0x4
-
-#define CPU_TYPE_ENTRY(N, V, NC) { .Name = #N, .SocVer = SVR_##V, .NumCores = (NC)}
-
-#define SVR_WO_E 0xFFFFFE
-#define SVR_LS1043A 0x879200
-#define SVR_LS1046A 0x870700
-#define SVR_LS2088A 0x870901
-
-#define SVR_MAJOR(svr) (((svr) >> 4) & 0xf)
-#define SVR_MINOR(svr) (((svr) >> 0) & 0xf)
-#define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E)
-#define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1))
-
-#define MHZ 1000000
-
-typedef struct {
- CHAR8 *Name;
- UINT32 SocVer;
- UINT32 NumCores;
-} CPU_TYPE;
-
-typedef struct {
- UINTN CpuClk; /* CPU clock in Hz! */
- UINTN BusClk;
- UINTN MemClk;
- UINTN PciClk;
- UINTN SdhcClk;
-} SOC_CLOCK_INFO;
-
-/*
- * Initialize Clock structure
- */
-VOID
-ClockInit (
- VOID
- );
-
/*
* Setup SMMU in bypass mode
* and also set its pagesize
@@ -71,42 +19,4 @@ SmmuInit (
VOID
);
-UINT32
-InitiatorType (
- IN UINT32 Cluster,
- IN UINTN InitId
- );
-
-/*
- * Return the mask for number of cores on this SOC.
- */
-UINT32
-CpuMask (
- VOID
- );
-
-/*
- * Return the number of cores on this SOC.
- */
-UINTN
-CpuNumCores (
- VOID
- );
-
-/*
- * Return the type of initiator for core/hardware accelerator for given core index.
- */
-UINTN
-QoriqCoreToType (
- IN UINTN Core
- );
-
-/*
- * Return the cluster of initiator for core/hardware accelerator for given core index.
- */
-INT32
-QoriqCoreToCluster (
- IN UINTN Core
- );
-
#endif /* NXP_CHASSIS_H_ */
diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
index adca7b8dd413..847331a63152 100644
--- a/Silicon/NXP/Library/SocLib/Chassis.c
+++ b/Silicon/NXP/Library/SocLib/Chassis.c
@@ -25,16 +25,6 @@
#include <DramInfo.h>
#include "NxpChassis.h"
-/*
- * Structure to list available SOCs.
- * Name, Soc Version, Number of Cores
- */
-STATIC CPU_TYPE mCpuTypeList[] = {
- CPU_TYPE_ENTRY (LS1043A, LS1043A, 4),
- CPU_TYPE_ENTRY (LS1046A, LS1046A, 4),
- CPU_TYPE_ENTRY (LS2088A, LS2088A, 8),
-};
-
UINT32
EFIAPI
GurRead (
@@ -48,162 +38,6 @@ GurRead (
}
}
-/*
- * Return the type of initiator (core or hardware accelerator)
- */
-UINT32
-InitiatorType (
- IN UINT32 Cluster,
- IN UINTN InitId
- )
-{
- CCSR_GUR *GurBase;
- UINT32 Idx;
- UINT32 Type;
-
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
- Idx = (Cluster >> (InitId * 8)) & TP_CLUSTER_INIT_MASK;
- Type = GurRead ((UINTN)&GurBase->TpItyp[Idx]);
-
- if (Type & TP_ITYP_AV_MASK) {
- return Type;
- }
-
- return 0;
-}
-
-/*
- * Return the mask for number of cores on this SOC.
- */
-UINT32
-CpuMask (
- VOID
- )
-{
- CCSR_GUR *GurBase;
- UINTN ClusterIndex;
- UINTN Count;
- UINT32 Cluster;
- UINT32 Type;
- UINT32 Mask;
- UINTN InitiatorIndex;
-
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
- ClusterIndex = 0;
- Count = 0;
- Mask = 0;
-
- do {
- Cluster = GurRead ((UINTN)&GurBase->TpCluster[ClusterIndex].Lower);
- for (InitiatorIndex = 0; InitiatorIndex < TP_INIT_PER_CLUSTER; InitiatorIndex++) {
- Type = InitiatorType (Cluster, InitiatorIndex);
- if (Type) {
- if (TP_ITYP_TYPE_MASK (Type) == TP_ITYP_TYPE_ARM) {
- Mask |= 1 << Count;
- }
- Count++;
- }
- }
- ClusterIndex++;
- } while (CHECK_CLUSTER (Cluster));
-
- return Mask;
-}
-
-/*
- * Return the number of cores on this SOC.
- */
-UINTN
-CpuNumCores (
- VOID
- )
-{
- UINTN Count;
- UINTN Num;
-
- Count = 0;
- Num = CpuMask ();
-
- while (Num) {
- Count += Num & 1;
- Num >>= 1;
- }
-
- return Count;
-}
-
-/*
- * Return core's cluster
- */
-INT32
-QoriqCoreToCluster (
- IN UINTN Core
- )
-{
- CCSR_GUR *GurBase;
- UINTN ClusterIndex;
- UINTN Count;
- UINT32 Cluster;
- UINT32 Type;
- UINTN InitiatorIndex;
-
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
- ClusterIndex = 0;
- Count = 0;
- do {
- Cluster = GurRead ((UINTN)&GurBase->TpCluster[ClusterIndex].Lower);
- for (InitiatorIndex = 0; InitiatorIndex < TP_INIT_PER_CLUSTER; InitiatorIndex++) {
- Type = InitiatorType (Cluster, InitiatorIndex);
- if (Type) {
- if (Count == Core) {
- return ClusterIndex;
- }
- Count++;
- }
- }
- ClusterIndex++;
- } while (CHECK_CLUSTER (Cluster));
-
- return -1; // cannot identify the cluster
-}
-
-/*
- * Return the type of core i.e. A53, A57 etc of inputted
- * core number.
- */
-UINTN
-QoriqCoreToType (
- IN UINTN Core
- )
-{
- CCSR_GUR *GurBase;
- UINTN ClusterIndex;
- UINTN Count;
- UINT32 Cluster;
- UINT32 Type;
- UINTN InitiatorIndex;
-
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
- ClusterIndex = 0;
- Count = 0;
-
- do {
- Cluster = GurRead ((UINTN)&GurBase->TpCluster[ClusterIndex].Lower);
- for (InitiatorIndex = 0; InitiatorIndex < TP_INIT_PER_CLUSTER; InitiatorIndex++) {
- Type = InitiatorType (Cluster, InitiatorIndex);
- if (Type) {
- if (Count == Core) {
- return Type;
- }
- Count++;
- }
- }
- ClusterIndex++;
- } while (CHECK_CLUSTER (Cluster));
-
- return EFI_NOT_FOUND; /* cannot identify the cluster */
-}
-
/*
* Return system bus frequency
*/
@@ -219,21 +53,6 @@ GetBusFrequency (
return SocSysInfo.FreqSystemBus;
}
-/*
- * Return SDXC bus frequency
- */
-UINT64
-GetSdxcFrequency (
- VOID
- )
-{
- SYS_INFO SocSysInfo;
-
- GetSysInfo (&SocSysInfo);
-
- return SocSysInfo.FreqSdhc;
-}
-
/*
* Setup SMMU in bypass mode
* and also set its pagesize
@@ -256,33 +75,6 @@ SmmuInit (
MmioWrite32 ((UINTN)SMMU_REG_NSCR0, Value);
}
-/*
- * Return current Soc Name form mCpuTypeList
- */
-CHAR8 *
-GetSocName (
- VOID
- )
-{
- UINT8 Count;
- UINTN Svr;
- UINTN Ver;
- CCSR_GUR *GurBase;
-
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
-
- Svr = GurRead ((UINTN)&GurBase->Svr);
- Ver = SVR_SOC_VER (Svr);
-
- for (Count = 0; Count < ARRAY_SIZE (mCpuTypeList); Count++) {
- if ((mCpuTypeList[Count].SocVer & SVR_WO_E) == Ver) {
- return (CHAR8 *)mCpuTypeList[Count].Name;
- }
- }
-
- return NULL;
-}
-
UINTN
GetDramSize (
IN VOID
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
index 687a1d940066..d992e53546f4 100644
--- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
+++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
@@ -32,38 +32,14 @@ GetSysInfo (
)
{
CCSR_GUR *GurBase;
- CCSR_CLOCK *ClkBase;
- UINTN CpuIndex;
- UINT32 TempRcw;
- UINT32 CPllSel;
- UINT32 CplxPll;
- CONST UINT8 CoreCplxPll[8] = {
- [0] = 0, /* CC1 PPL / 1 */
- [1] = 0, /* CC1 PPL / 2 */
- [4] = 1, /* CC2 PPL / 1 */
- [5] = 1, /* CC2 PPL / 2 */
- };
-
- CONST UINT8 CoreCplxPllDivisor[8] = {
- [0] = 1, /* CC1 PPL / 1 */
- [1] = 2, /* CC1 PPL / 2 */
- [4] = 1, /* CC2 PPL / 1 */
- [5] = 2, /* CC2 PPL / 2 */
- };
-
- UINTN PllCount;
- UINTN FreqCPll[NUM_CC_PLLS];
- UINTN PllRatio[NUM_CC_PLLS];
UINTN SysClk;
GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
- ClkBase = (VOID *)PcdGet64 (PcdClkBaseAddr);
SysClk = CLK_FREQ;
SetMem (PtrSysInfo, sizeof (SYS_INFO), 0);
PtrSysInfo->FreqSystemBus = SysClk;
- PtrSysInfo->FreqDdrBus = SysClk;
//
// selects the platform clock:SYSCLK ratio and calculate
@@ -72,61 +48,6 @@ GetSysInfo (
PtrSysInfo->FreqSystemBus *= (GurRead ((UINTN)&GurBase->RcwSr[0]) >>
CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
- //
- // selects the DDR PLL:SYSCLK Ratio and calculate DDR frequency
- //
- PtrSysInfo->FreqDdrBus *= (GurRead ((UINTN)&GurBase->RcwSr[0]) >>
- CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT) &
- CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK;
-
- for (PllCount = 0; PllCount < NUM_CC_PLLS; PllCount++) {
- PllRatio[PllCount] = (GurRead ((UINTN)&ClkBase->PllCgSr[PllCount].PllCnGSr) >> 1) & 0xff;
- if (PllRatio[PllCount] > 4) {
- FreqCPll[PllCount] = SysClk * PllRatio[PllCount];
- } else {
- FreqCPll[PllCount] = PtrSysInfo->FreqSystemBus * PllRatio[PllCount];
- }
- }
-
- //
- // Calculate Core frequency
- //
- for (CpuIndex = 0; CpuIndex < MAX_CPUS; CpuIndex++) {
- CPllSel = (GurRead ((UINTN)&ClkBase->ClkcSr[CpuIndex].ClkCnCSr) >> 27) & 0xf;
- CplxPll = CoreCplxPll[CPllSel];
-
- PtrSysInfo->FreqProcessor[CpuIndex] = FreqCPll[CplxPll] / CoreCplxPllDivisor[CPllSel];
- }
-
- //
- // Calculate FMAN frequency
- //
- TempRcw = GurRead ((UINTN)&GurBase->RcwSr[7]);
- switch ((TempRcw & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) {
- case 2:
- PtrSysInfo->FreqFman[0] = FreqCPll[0] / 2;
- break;
- case 3:
- PtrSysInfo->FreqFman[0] = FreqCPll[0] / 3;
- break;
- case 4:
- PtrSysInfo->FreqFman[0] = FreqCPll[0] / 4;
- break;
- case 5:
- PtrSysInfo->FreqFman[0] = PtrSysInfo->FreqSystemBus;
- break;
- case 6:
- PtrSysInfo->FreqFman[0] = FreqCPll[1] / 2;
- break;
- case 7:
- PtrSysInfo->FreqFman[0] = FreqCPll[1] / 3;
- break;
- default:
- DEBUG ((DEBUG_WARN, "Error: Unknown FMan1 clock select!\n"));
- break;
- }
- PtrSysInfo->FreqSdhc = PtrSysInfo->FreqSystemBus/PcdGet32 (PcdPlatformFreqDiv);
- PtrSysInfo->FreqQman = PtrSysInfo->FreqSystemBus/PcdGet32 (PcdPlatformFreqDiv);
}
/**
diff --git a/Silicon/NXP/Library/SocLib/SerDes.c b/Silicon/NXP/Library/SocLib/SerDes.c
deleted file mode 100644
index b9909d922138..000000000000
--- a/Silicon/NXP/Library/SocLib/SerDes.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/** SerDes.c
- Provides the basic interfaces for SerDes Module
-
- Copyright 2017-2019 NXP
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifdef CHASSIS2
-#include <Chassis2/LsSerDes.h>
-#include <Chassis2/NxpSoc.h>
-#elif CHASSIS3
-#include <Chassis3/LsSerDes.h>
-#include <Chassis3/NxpSoc.h>
-#endif
-#include <Library/DebugLib.h>
-#include <SocSerDes.h>
-#include <Uefi.h>
-
-/**
- Function to get serdes Lane protocol corresponding to
- serdes protocol.
-
- @param SerDes Serdes number.
- @param Cfg Serdes Protocol.
- @param Lane Serdes Lane number.
-
- @return Serdes Lane protocol.
-
-**/
-STATIC
-SERDES_PROTOCOL
-GetSerDesPrtcl (
- IN INTN SerDes,
- IN INTN Cfg,
- IN INTN Lane
- )
-{
- SERDES_CONFIG *Config;
-
- if (SerDes >= ARRAY_SIZE (SerDesConfigTbl)) {
- return 0;
- }
-
- Config = SerDesConfigTbl[SerDes];
- while (Config->Protocol) {
- if (Config->Protocol == Cfg) {
- return Config->SrdsLane[Lane];
- }
- Config++;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Function to check if inputted protocol is a valid serdes protocol.
-
- @param SerDes Serdes number.
- @param Prtcl Serdes Protocol to be verified.
-
- @return EFI_INVALID_PARAMETER Input parameter in invalid.
- @return EFI_NOT_FOUND Serdes Protocol not a valid protocol.
- @return EFI_SUCCESS Serdes Protocol is a valid protocol.
-
-**/
-STATIC
-EFI_STATUS
-CheckSerDesPrtclValid (
- IN INTN SerDes,
- IN UINT32 Prtcl
- )
-{
- SERDES_CONFIG *Config;
- INTN Cnt;
-
- if (SerDes >= ARRAY_SIZE (SerDesConfigTbl)) {
- return EFI_INVALID_PARAMETER;
- }
-
- Config = SerDesConfigTbl[SerDes];
- while (Config->Protocol) {
- if (Config->Protocol == Prtcl) {
- DEBUG ((DEBUG_INFO, "Protocol: %x Matched with the one in Table\n", Prtcl));
- break;
- }
- Config++;
- }
-
- if (!Config->Protocol) {
- return EFI_NOT_FOUND;
- }
-
- for (Cnt = 0; Cnt < SRDS_MAX_LANES; Cnt++) {
- if (Config->SrdsLane[Cnt] != None) {
- return EFI_SUCCESS;
- }
- }
-
- return EFI_NOT_FOUND;
-}
-
-/**
- Function to fill serdes map information.
-
- @param Srds Serdes number.
- @param SerdesProtocolMask Serdes Protocol Mask.
- @param SerdesProtocolShift Serdes Protocol shift value.
- @param SerDesPrtclMap Pointer to Serdes Protocol map.
-
-**/
-STATIC
-VOID
-LSSerDesMap (
- IN UINT32 Srds,
- IN UINT32 SerdesProtocolMask,
- IN UINT32 SerdesProtocolShift,
- OUT UINT64 *SerDesPrtclMap
- )
-{
- CCSR_GUR *Gur;
- UINT32 SrdsProt;
- INTN Lane;
- UINT32 Flag;
-
- Gur = (VOID *)PcdGet64 (PcdGutsBaseAddr);
- *SerDesPrtclMap = 0x0;
- Flag = 0;
-
- SrdsProt = GurRead ((UINTN)&Gur->RcwSr[RCWSR_INDEX]) & SerdesProtocolMask;
- SrdsProt >>= SerdesProtocolShift;
-
- DEBUG ((DEBUG_INFO, "Using SERDES%d Protocol: %d (0x%x)\n",
- Srds + 1, SrdsProt, SrdsProt));
-
- if (EFI_SUCCESS != CheckSerDesPrtclValid (Srds, SrdsProt)) {
- DEBUG ((DEBUG_ERROR, "SERDES%d[PRTCL] = 0x%x is not valid\n",
- Srds + 1, SrdsProt));
- Flag++;
- }
-
- for (Lane = 0; Lane < SRDS_MAX_LANES; Lane++) {
- SERDES_PROTOCOL LanePrtcl = GetSerDesPrtcl (Srds, SrdsProt, Lane);
- if (LanePrtcl >= SerdesPrtclCount) {
- DEBUG ((DEBUG_ERROR, "Unknown SerDes lane protocol %d\n", LanePrtcl));
- Flag++;
- } else {
- *SerDesPrtclMap |= (1u << LanePrtcl);
- }
- }
-
- if (Flag) {
- DEBUG ((DEBUG_ERROR, "Could not configure SerDes module!!\n"));
- } else {
- DEBUG ((DEBUG_INFO, "Successfully configured SerDes module!!\n"));
- }
-}
-
-/**
- Get lane protocol on provided serdes lane and execute callback function.
-
- @param Srds Serdes number.
- @param SerdesProtocolMask Mask to get Serdes Protocol for Srds
- @param SerdesProtocolShift Shift value to get Serdes Protocol for Srds.
- @param SerDesLaneProbeCallback Pointer Callback function to be called for Lane protocol
- @param Arg Pointer to Arguments to be passed to callback function.
-
-**/
-STATIC
-VOID
-SerDesInstanceProbeLanes (
- IN UINT32 Srds,
- IN UINT32 SerdesProtocolMask,
- IN UINT32 SerdesProtocolShift,
- IN SERDES_PROBE_LANES_CALLBACK SerDesLaneProbeCallback,
- IN VOID *Arg
- )
-{
-
- CCSR_GUR *Gur;
- UINT32 SrdsProt;
- INTN Lane;
-
- Gur = (VOID *)PcdGet64 (PcdGutsBaseAddr);;
-
- SrdsProt = GurRead ((UINTN)&Gur->RcwSr[RCWSR_INDEX]) & SerdesProtocolMask;
- SrdsProt >>= SerdesProtocolShift;
-
- /*
- * Invoke callback for all lanes in the SerDes instance:
- */
- for (Lane = 0; Lane < SRDS_MAX_LANES; Lane++) {
- SERDES_PROTOCOL LanePrtcl = GetSerDesPrtcl (Srds, SrdsProt, Lane);
- if ((LanePrtcl >= SerdesPrtclCount) || (LanePrtcl < None)) {
- DEBUG ((DEBUG_ERROR, "Unknown SerDes lane protocol %d\n", LanePrtcl));
- } else if (LanePrtcl != None) {
- SerDesLaneProbeCallback (LanePrtcl, Arg);
- }
- }
-}
-
-/**
- Probe all serdes lanes for lane protocol and execute provided callback function.
-
- @param SerDesLaneProbeCallback Pointer Callback function to be called for Lane protocol
- @param Arg Pointer to Arguments to be passed to callback function.
-
-**/
-VOID
-SerDesProbeLanes (
- IN SERDES_PROBE_LANES_CALLBACK SerDesLaneProbeCallback,
- IN VOID *Arg
- )
-{
- SerDesInstanceProbeLanes (Srds1,
- RCWSR_SRDS1_PRTCL_MASK,
- RCWSR_SRDS1_PRTCL_SHIFT,
- SerDesLaneProbeCallback,
- Arg);
-
- if (PcdGetBool (PcdSerdes2Enabled)) {
- SerDesInstanceProbeLanes (Srds2,
- RCWSR_SRDS2_PRTCL_MASK,
- RCWSR_SRDS2_PRTCL_SHIFT,
- SerDesLaneProbeCallback,
- Arg);
- }
-}
-
-/**
- Function to return Serdes protocol map for all serdes available on board.
-
- @param SerDesPrtclMap Pointer to Serdes protocl map.
-
-**/
-VOID
-GetSerdesProtocolMaps (
- OUT UINT64 *SerDesPrtclMap
- )
-{
- LSSerDesMap (Srds1,
- RCWSR_SRDS1_PRTCL_MASK,
- RCWSR_SRDS1_PRTCL_SHIFT,
- SerDesPrtclMap);
-
- if (PcdGetBool (PcdSerdes2Enabled)) {
- LSSerDesMap (Srds2,
- RCWSR_SRDS2_PRTCL_MASK,
- RCWSR_SRDS2_PRTCL_SHIFT,
- SerDesPrtclMap);
- }
-
-}
-
-BOOLEAN
-IsSerDesLaneProtocolConfigured (
- IN UINT64 SerDesPrtclMap,
- IN SERDES_PROTOCOL Device
- )
-{
- if ((Device >= SerdesPrtclCount) || (Device < None)) {
- ASSERT ((Device > None) && (Device < SerdesPrtclCount));
- DEBUG ((DEBUG_ERROR, "Unknown SerDes lane protocol Device %d\n", Device));
- }
-
- return (SerDesPrtclMap & (1u << Device)) != 0 ;
-}
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 09/24] Silicon/NXP: Remove unnecessary PCDs
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (7 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 08/24] Silicon/NXP: remove not needed components Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 10/24] Silicon/NXP: Move dsc file Pankaj Bansal
` (15 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The memory map of an SOC is fixed in hardware. it doesn't change with
platform that uses SOC. So, there is no need to keep PCDs for these values
and we can use macros for these in SOC header file.
Any Platform using the SOC, can make use of the SOC header file.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/NXP/NxpQoriqLs.dec | 47 ------------
Silicon/NXP/LS1043A/LS1043A.dsc.inc | 26 -------
Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf | 10 +--
Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf | 21 +-----
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 -
Silicon/NXP/Include/Chassis2/NxpSoc.h | 2 +
Silicon/NXP/LS1043A/Include/Soc.h | 44 +++++++++++
Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.c | 15 ++--
Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c | 79 +++++++++-----------
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 2 +-
10 files changed, 97 insertions(+), 150 deletions(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index 943dbac81013..b478560450b3 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -22,53 +22,6 @@
gNxpNonDiscoverableI2cMasterGuid = { 0x5f2c099c, 0x54a3, 0x4dd4, {0x9e, 0xc5, 0xe9, 0x12, 0x8c, 0x36, 0x81, 0x6a}}
[PcdsFixedAtBuild.common]
- #
- # Pcds for I2C Controller
- #
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSpeed|0|UINT32|0x00000001
- gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController|0|UINT32|0x00000002
-
- #
- # Pcds for base address and size
- #
- gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr|0x0|UINT64|0x00000100
- gNxpQoriqLsTokenSpaceGuid.PcdClkBaseAddr|0x0|UINT64|0x00000103
- gNxpQoriqLsTokenSpaceGuid.PcdDdrBaseAddr|0x0|UINT64|0x00000105
- gNxpQoriqLsTokenSpaceGuid.PcdSdxcBaseAddr|0x0|UINT64|0x00000106
- gNxpQoriqLsTokenSpaceGuid.PcdScfgBaseAddr|0x0|UINT64|0x00000107
- gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr|0x0|UINT64|0x00000108
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSize|0x0|UINT32|0x00000109
- gNxpQoriqLsTokenSpaceGuid.PcdDcsrBaseAddr|0x0|UINT64|0x0000010A
- gNxpQoriqLsTokenSpaceGuid.PcdDcsrSize|0x0|UINT64|0x0000010B
- gNxpQoriqLsTokenSpaceGuid.PcdSataBaseAddr|0x0|UINT32|0x0000010C
- gNxpQoriqLsTokenSpaceGuid.PcdSataSize|0x0|UINT32|0x0000010D
- gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpBaseAddr|0x0|UINT64|0x0000010E
- gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpSize|0x0|UINT64|0x0000010F
- gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpBaseAddr|0x0|UINT64|0x00000110
- gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpSize|0x0|UINT64|0x00000111
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseAddr|0x0|UINT64|0x00000112
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseSize|0x0|UINT64|0x00000113
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseAddr|0x0|UINT64|0x00000114
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseSize|0x0|UINT64|0x00000115
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseAddr|0x0|UINT64|0x00000116
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseSize|0x0|UINT64|0x00000117
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp4BaseAddr|0x0|UINT64|0x0000118
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp4BaseSize|0x0|UINT64|0x0000119
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionBaseAddr|0x0|UINT64|0x0000011A
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionSize|0x0|UINT64|0x0000011B
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegion2BaseAddr|0x0|UINT64|0x0000011C
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegion2Size|0x0|UINT64|0x0000011D
- gNxpQoriqLsTokenSpaceGuid.PcdCcsrBaseAddr|0x0|UINT64|0x00000122
- gNxpQoriqLsTokenSpaceGuid.PcdCcsrSize|0x0|UINT64|0x00000123
-
- #
- # IFC PCDs
- #
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1BaseAddr|0x0|UINT64|0x00000190
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1Size|0x0|UINT64|0x00000191
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2BaseAddr|0x0|UINT64|0x00000192
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2Size|0x0|UINT64|0x00000193
-
#
# Platform PCDs
#
diff --git a/Silicon/NXP/LS1043A/LS1043A.dsc.inc b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
index f6ada08dad9d..7690e4caa593 100644
--- a/Silicon/NXP/LS1043A/LS1043A.dsc.inc
+++ b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
@@ -26,32 +26,6 @@
[PcdsFixedAtBuild.common]
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x021c0500
- #
- # CCSR Address Space and other attached Memories
- #
- gNxpQoriqLsTokenSpaceGuid.PcdCcsrBaseAddr|0x01000000
- gNxpQoriqLsTokenSpaceGuid.PcdCcsrSize|0x0F000000
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1BaseAddr|0x60000000
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1Size|0x20000000
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2BaseAddr|0x0620000000
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2Size|0x00E0000000
- gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpBaseAddr|0x0500000000
- gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpSize|0x0080000000
- gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpBaseAddr|0x0508000000
- gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpSize|0x0080000000
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseAddr|0x4000000000
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseSize|0x800000000
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseAddr|0x4800000000
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseSize|0x800000000
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseAddr|0x5000000000
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseSize|0x800000000
- gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr|0x01EE0000
- gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr|0x02180000
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSize|0x10000
- gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController|4
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionBaseAddr|0x40000000
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionSize|0x20000000
-
#
# Big Endian IPs
#
diff --git a/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf b/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf
index d689cf4db58e..038d48949a39 100644
--- a/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf
+++ b/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf
@@ -2,7 +2,7 @@
#
# Component description file for LS1043 DXE platform driver.
#
-# Copyright 2018-2019 NXP
+# Copyright 2018-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -21,9 +21,10 @@
[Packages]
ArmPkg/ArmPkg.dec
- MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec
+ Silicon/NXP/LS1043A/LS1043A.dec
Silicon/NXP/NxpQoriqLs.dec
[LibraryClasses]
@@ -43,10 +44,5 @@
gEdkiiNonDiscoverableDeviceProtocolGuid ## PRODUCES
gDs1307RealTimeClockLibI2cMasterProtocolGuid ## PRODUCES
-[FixedPcd]
- gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdI2cSize
- gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController
-
[Depex]
TRUE
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf b/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
index f7ae74afc6ca..7563a1c43630 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
+++ b/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
@@ -1,7 +1,7 @@
# @file
#
# Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
-# Copyright 2017, 2019 NXP
+# Copyright 2017, 2019-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -19,6 +19,7 @@
ArmPlatformPkg/ArmPlatformPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
+ Silicon/NXP/LS1043A/LS1043A.dec
Silicon/NXP/NxpQoriqLs.dec
[LibraryClasses]
@@ -35,21 +36,3 @@
[FixedPcd]
gArmTokenSpaceGuid.PcdArmPrimaryCore
- gNxpQoriqLsTokenSpaceGuid.PcdCcsrBaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdCcsrSize
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion1Size
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdIfcRegion2Size
- gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpBaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdQmanSwpSize
- gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpBaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdBmanSwpSize
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseSize
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseSize
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseSize
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionBaseAddr
- gNxpQoriqLsTokenSpaceGuid.PcdQspiRegionSize
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
index f75a8d19f5a5..b7c7fc78cc8f 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
@@ -36,5 +36,4 @@
[FixedPcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian
- gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr
gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
diff --git a/Silicon/NXP/Include/Chassis2/NxpSoc.h b/Silicon/NXP/Include/Chassis2/NxpSoc.h
index 74330b6205e7..6812beafe447 100644
--- a/Silicon/NXP/Include/Chassis2/NxpSoc.h
+++ b/Silicon/NXP/Include/Chassis2/NxpSoc.h
@@ -12,6 +12,8 @@
#define CLK_FREQ 100000000
+#define CHASSIS2_DCFG_ADDRESS 0x1EE0000
+
/* SMMU Defintions */
#define SMMU_BASE_ADDR 0x09000000
#define SMMU_REG_SCR0 (SMMU_BASE_ADDR + 0x0)
diff --git a/Silicon/NXP/LS1043A/Include/Soc.h b/Silicon/NXP/LS1043A/Include/Soc.h
new file mode 100644
index 000000000000..441871757d67
--- /dev/null
+++ b/Silicon/NXP/LS1043A/Include/Soc.h
@@ -0,0 +1,44 @@
+/** @file
+
+ Copyright 2020 NXP
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+#ifndef SOC_H__
+#define SOC_H__
+
+/**
+ Soc Memory Map
+**/
+#define LS1043A_DRAM0_PHYS_ADDRESS 0x80000000
+#define LS1043A_DRAM0_SIZE SIZE_2GB
+#define LS1043A_DRAM1_PHYS_ADDRESS 0x880000000
+#define LS1043A_DRAM1_SIZE 0x780000000 // 30 GB
+
+#define LS1043A_CCSR_PHYS_ADDRESS 0x1000000
+#define LS1043A_CCSR_SIZE 0xF000000
+
+#define LS1043A_IFC0_PHYS_ADDRESS 0x60000000
+#define LS1043A_IFC0_SIZE SIZE_512MB
+#define LS1043A_IFC1_PHYS_ADDRESS 0x620000000
+#define LS1043A_IFC1_SIZE 0xE0000000 // 3.5 GB
+
+#define LS1043A_QSPI_PHYS_ADDRESS 0x40000000
+#define LS1043A_QSPI_SIZE SIZE_512MB
+
+#define LS1043A_QMAN_SW_PORTAL_PHYS_ADDRESS 0x500000000
+#define LS1043A_QMAN_SW_PORTAL_SIZE SIZE_128MB
+#define LS1043A_BMAN_SW_PORTAL_PHYS_ADDRESS 0x508000000
+#define LS1043A_BMAN_SW_PORTAL_SIZE SIZE_128MB
+
+#define LS1043A_PCI0_PHYS_ADDRESS 0x4000000000
+#define LS1043A_PCI1_PHYS_ADDRESS 0x4800000000
+#define LS1043A_PCI2_PHYS_ADDRESS 0x5000000000
+#define LS1043A_PCI_SIZE SIZE_32GB
+
+#define LS1043A_I2C0_PHYS_ADDRESS 0x2180000
+#define LS1043A_I2C_SIZE 0x10000
+#define LS1043A_I2C_NUM_CONTROLLERS 4
+
+#endif // SOC_H__
diff --git a/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.c b/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.c
index f89dcdeff3c1..62c400eb1a58 100644
--- a/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.c
+++ b/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.c
@@ -1,7 +1,7 @@
/** @file
LS1043 DXE platform driver.
- Copyright 2018-2019 NXP
+ Copyright 2018-2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -14,6 +14,7 @@
#include <Library/PcdLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
+#include <Soc.h>
#include <Protocol/NonDiscoverableDevice.h>
@@ -22,7 +23,7 @@ typedef struct {
UINT8 EndDesc;
} ADDRESS_SPACE_DESCRIPTOR;
-STATIC ADDRESS_SPACE_DESCRIPTOR mI2cDesc[FixedPcdGet64 (PcdNumI2cController)];
+STATIC ADDRESS_SPACE_DESCRIPTOR mI2cDesc[LS1043A_I2C_NUM_CONTROLLERS];
STATIC
EFI_STATUS
@@ -65,19 +66,19 @@ PopulateI2cInformation (
{
UINT32 Index;
- for (Index = 0; Index < FixedPcdGet32 (PcdNumI2cController); Index++) {
+ for (Index = 0; Index < ARRAY_SIZE (mI2cDesc); Index++) {
mI2cDesc[Index].StartDesc.Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
mI2cDesc[Index].StartDesc.Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;
mI2cDesc[Index].StartDesc.ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
mI2cDesc[Index].StartDesc.GenFlag = 0;
mI2cDesc[Index].StartDesc.SpecificFlag = 0;
mI2cDesc[Index].StartDesc.AddrSpaceGranularity = 32;
- mI2cDesc[Index].StartDesc.AddrRangeMin = FixedPcdGet64 (PcdI2c0BaseAddr) +
- (Index * FixedPcdGet32 (PcdI2cSize));
+ mI2cDesc[Index].StartDesc.AddrRangeMin = LS1043A_I2C0_PHYS_ADDRESS +
+ (Index * LS1043A_I2C_SIZE);
mI2cDesc[Index].StartDesc.AddrRangeMax = mI2cDesc[Index].StartDesc.AddrRangeMin +
- FixedPcdGet32 (PcdI2cSize) - 1;
+ LS1043A_I2C_SIZE - 1;
mI2cDesc[Index].StartDesc.AddrTranslationOffset = 0;
- mI2cDesc[Index].StartDesc.AddrLen = FixedPcdGet32 (PcdI2cSize);
+ mI2cDesc[Index].StartDesc.AddrLen = LS1043A_I2C_SIZE;
mI2cDesc[Index].EndDesc = ACPI_END_TAG_DESCRIPTOR;
}
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c b/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c
index c6c256da0727..f5fa308551aa 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c
+++ b/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c
@@ -6,7 +6,7 @@
*
* Copyright (c) 2011, ARM Limited. All rights reserved.
* Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
-* Copyright 2017, 2019 NXP
+* Copyright 2017, 2019-2020 NXP
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -16,7 +16,7 @@
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Library/MemoryAllocationLib.h>
-#include <DramInfo.h>
+#include <Soc.h>
#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 25
@@ -38,7 +38,6 @@ ArmPlatformGetVirtualMemoryMap (
{
UINTN Index;
ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
- DRAM_INFO DramInfo;
Index = 0;
@@ -51,24 +50,20 @@ ArmPlatformGetVirtualMemoryMap (
return;
}
- if (GetDramBankInfo (&DramInfo)) {
- DEBUG ((DEBUG_ERROR, "Failed to get DRAM information, exiting...\n"));
- return;
- }
+ VirtualMemoryTable[Index].PhysicalBase = LS1043A_DRAM0_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_DRAM0_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_DRAM0_SIZE;
+ VirtualMemoryTable[Index++].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
-
- for (Index = 0; Index < DramInfo.NumOfDrams; Index++) {
- // DRAM1 (Must be 1st entry)
- VirtualMemoryTable[Index].PhysicalBase = DramInfo.DramRegion[Index].BaseAddress;
- VirtualMemoryTable[Index].VirtualBase = DramInfo.DramRegion[Index].BaseAddress;
- VirtualMemoryTable[Index].Length = DramInfo.DramRegion[Index].Size;
- VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
- }
+ VirtualMemoryTable[Index].PhysicalBase = LS1043A_DRAM1_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_DRAM1_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_DRAM1_SIZE;
+ VirtualMemoryTable[Index++].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
// CCSR Space
- VirtualMemoryTable[Index].PhysicalBase = FixedPcdGet64 (PcdCcsrBaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdCcsrBaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdCcsrSize);
+ VirtualMemoryTable[Index].PhysicalBase = LS1043A_CCSR_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_CCSR_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_CCSR_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
// IFC region 1
@@ -85,51 +80,51 @@ ArmPlatformGetVirtualMemoryMap (
// For write transactions from non-core masters (like system DMA), the address
// should be 16 byte aligned and the data size should be multiple of 16 bytes.
//
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdIfcRegion1BaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdIfcRegion1BaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdIfcRegion1Size);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_IFC0_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_IFC0_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_IFC0_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
// QMAN SWP
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdQmanSwpBaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdQmanSwpBaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdQmanSwpSize);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_QMAN_SW_PORTAL_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_QMAN_SW_PORTAL_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_QMAN_SW_PORTAL_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED;
// BMAN SWP
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdBmanSwpBaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdBmanSwpBaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdBmanSwpSize);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_BMAN_SW_PORTAL_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_BMAN_SW_PORTAL_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_QMAN_SW_PORTAL_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED;
// IFC region 2
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdIfcRegion2BaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdIfcRegion2BaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdIfcRegion2Size);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_IFC1_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_IFC1_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_IFC1_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
// PCIe1
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdPciExp1BaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdPciExp1BaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdPciExp1BaseSize);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_PCI0_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_PCI0_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_PCI_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
// PCIe2
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdPciExp2BaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdPciExp2BaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdPciExp2BaseSize);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_PCI1_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_PCI1_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_PCI_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
// PCIe3
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdPciExp3BaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdPciExp3BaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdPciExp3BaseSize);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_PCI2_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_PCI2_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_PCI_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
// QSPI region
- VirtualMemoryTable[++Index].PhysicalBase = FixedPcdGet64 (PcdQspiRegionBaseAddr);
- VirtualMemoryTable[Index].VirtualBase = FixedPcdGet64 (PcdQspiRegionBaseAddr);
- VirtualMemoryTable[Index].Length = FixedPcdGet64 (PcdQspiRegionSize);
+ VirtualMemoryTable[++Index].PhysicalBase = LS1043A_QSPI_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].VirtualBase = LS1043A_QSPI_PHYS_ADDRESS;
+ VirtualMemoryTable[Index].Length = LS1043A_QSPI_SIZE;
VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED;
// End of Table
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
index d992e53546f4..98ca2e162f7b 100644
--- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
+++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
@@ -34,7 +34,7 @@ GetSysInfo (
CCSR_GUR *GurBase;
UINTN SysClk;
- GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
+ GurBase = (CCSR_GUR *)CHASSIS2_DCFG_ADDRESS;
SysClk = CLK_FREQ;
SetMem (PtrSysInfo, sizeof (SYS_INFO), 0);
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 10/24] Silicon/NXP: Move dsc file
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (8 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 09/24] Silicon/NXP: Remove unnecessary PCDs Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 11/24] Platform/NXP: rename the ArmPlatformLib as per ArmPlatformPkg Pankaj Bansal
` (14 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
As per convention being followed in edk2-platforms, keep the dec
file and dsc file together.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
{Platform => Silicon}/NXP/NxpQoriqLs.dsc.inc | 0
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 2 +-
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/Platform/NXP/NxpQoriqLs.dsc.inc b/Silicon/NXP/NxpQoriqLs.dsc.inc
similarity index 100%
rename from Platform/NXP/NxpQoriqLs.dsc.inc
rename to Silicon/NXP/NxpQoriqLs.dsc.inc
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
index 385b6e067e26..1975f2c4c52c 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
@@ -22,7 +22,7 @@
OUTPUT_DIRECTORY = Build/LS1043aRdbPkg
FLASH_DEFINITION = Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
-!include Platform/NXP/NxpQoriqLs.dsc.inc
+!include Silicon/NXP/NxpQoriqLs.dsc.inc
!include Silicon/NXP/LS1043A/LS1043A.dsc.inc
[LibraryClasses.common]
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 11/24] Platform/NXP: rename the ArmPlatformLib as per ArmPlatformPkg
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (9 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 10/24] Silicon/NXP: Move dsc file Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 12/24] Silicon/NXP: Move RAM retrieval from SocLib Pankaj Bansal
` (13 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Keep the names and location of files as mentioned in ArmPlatformPkg.
This helps in porting the common changes (if any in future) easily.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 2 +-
Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib => ArmPlatformLib}/ArmPlatformLib.inf | 4 ++--
Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib => ArmPlatformLib}/ArmPlatformLib.c | 2 +-
Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib/NxpQoriqLsMem.c => ArmPlatformLib/ArmPlatformLibMem.c} | 0
Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib/NxpQoriqLsHelper.S => ArmPlatformLib/AArch64/ArmPlatformHelper.S} | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
index 1975f2c4c52c..e5383aaf0cc5 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
@@ -26,7 +26,7 @@
!include Silicon/NXP/LS1043A/LS1043A.dsc.inc
[LibraryClasses.common]
- ArmPlatformLib|Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
+ ArmPlatformLib|Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
RealTimeClockLib|Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
[PcdsFixedAtBuild.common]
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
similarity index 89%
rename from Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
rename to Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
index 7563a1c43630..7a43ad86d183 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
@@ -27,8 +27,8 @@
SocLib
[Sources.common]
- NxpQoriqLsHelper.S | GCC
- NxpQoriqLsMem.c
+ AArch64/ArmPlatformHelper.S | GCC
+ ArmPlatformLibMem.c
ArmPlatformLib.c
[Ppis]
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
similarity index 93%
rename from Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.c
rename to Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
index eac7d4aa4e47..718c71bf02eb 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.c
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
@@ -6,7 +6,7 @@
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
* Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
-* Copyright 2017 NXP
+* Copyright 2017, 2020 NXP
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
**/
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLibMem.c
similarity index 100%
rename from Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsMem.c
rename to Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLibMem.c
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsHelper.S b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
similarity index 88%
rename from Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsHelper.S
rename to Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
index 84ee8c9f9700..dfbf73675a2d 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsHelper.S
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
@@ -1,7 +1,7 @@
# @file
#
# Copyright (c) 2012-2013, ARM Limited. All rights reserved.
-# Copyright 2017 NXP
+# Copyright 2017, 2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 12/24] Silicon/NXP: Move RAM retrieval from SocLib
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (10 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 11/24] Platform/NXP: rename the ArmPlatformLib as per ArmPlatformPkg Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 9:15 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 13/24] Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs Pankaj Bansal
` (12 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
RAM retrieval using SMC commands is common to all Layerscape SOCs.
Therefore, move it to commom MemoryInit Pei Lib.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- sort headers alphabetically
- Moved DRAM region retrieval and Total DRAM size retrieval to separate
functions
- Fixed MemoryPeim function description
- Modified check on FoundSystemMem = TRUE to check the RAM region against
MemoryPeim function input arguments UefiMemoryBase and UefiMemorySize
- (!DramRegions[Index].Size) => (DramRegions[Index].Size == 0)
- (FoundSystemMem) => (FoundSystemMem == TRUE)
- Added explaination for starting for loop from the last DRAM region
Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf | 7 +-
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 -
Silicon/NXP/Include/DramInfo.h | 38 ----
Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h | 25 +++
Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c | 196 ++++++++++++++++----
Silicon/NXP/Library/SocLib/Chassis.c | 67 -------
6 files changed, 188 insertions(+), 146 deletions(-)
diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
index a5bd39415def..ad2371115b17 100644
--- a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
+++ b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
@@ -18,7 +18,6 @@
[Sources]
MemoryInitPeiLib.c
-
[Packages]
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
@@ -30,6 +29,7 @@
[LibraryClasses]
ArmMmuLib
ArmPlatformLib
+ ArmSmcLib
DebugLib
HobLib
PcdLib
@@ -40,6 +40,11 @@
[FeaturePcd]
gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFdSize
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize
+
[Pcd]
gArmTokenSpaceGuid.PcdSystemMemoryBase
gArmTokenSpaceGuid.PcdSystemMemorySize
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
index b7c7fc78cc8f..99d89498e0e2 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
@@ -20,7 +20,6 @@
Silicon/NXP/NxpQoriqLs.dec
[LibraryClasses]
- ArmSmcLib
BaseLib
DebugLib
IoAccessLib
diff --git a/Silicon/NXP/Include/DramInfo.h b/Silicon/NXP/Include/DramInfo.h
deleted file mode 100644
index a934aaeff1f5..000000000000
--- a/Silicon/NXP/Include/DramInfo.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/** @file
-* Header defining the structure for Dram Information
-*
-* Copyright 2019 NXP
-*
-* SPDX-License-Identifier: BSD-2-Clause-Patent
-*
-**/
-
-#ifndef DRAM_INFO_H_
-#define DRAM_INFO_H_
-
-#include <Uefi/UefiBaseType.h>
-
-#define SMC_DRAM_BANK_INFO (0xC200FF12)
-
-typedef struct {
- UINTN BaseAddress;
- UINTN Size;
-} DRAM_REGION_INFO;
-
-typedef struct {
- UINT32 NumOfDrams;
- UINT32 Reserved;
- DRAM_REGION_INFO DramRegion[3];
-} DRAM_INFO;
-
-EFI_STATUS
-GetDramBankInfo (
- IN OUT DRAM_INFO *DramInfo
- );
-
-VOID
-UpdateDpaaDram (
- IN OUT DRAM_INFO *DramInfo
- );
-
-#endif /* DRAM_INFO_H_ */
diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h
new file mode 100644
index 000000000000..edbf0ceaf638
--- /dev/null
+++ b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h
@@ -0,0 +1,25 @@
+/** @file
+*
+* Copyright 2020 NXP
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#ifndef MEMORY_INIT_PEI_LIB_H_
+#define MEMORY_INIT_PEI_LIB_H_
+
+#include <Uefi.h>
+
+// Specifies the Maximum regions onto which DDR memory can be mapped in
+// a Platform
+#define MAX_DRAM_REGIONS 3
+#define SMC_DRAM_BANK_INFO (0xC200FF12)
+
+typedef struct {
+ UINTN BaseAddress;
+ UINTN Size;
+} DRAM_REGION_INFO;
+
+#endif // MEMORY_INIT_PEI_LIB_H_
+
diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
index 3ea773678667..ea3e7d59532e 100644
--- a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
+++ b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
@@ -12,13 +12,15 @@
#include <Library/ArmMmuLib.h>
#include <Library/ArmPlatformLib.h>
+#include <Library/ArmSmcLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/HobLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/PcdLib.h>
-#include <DramInfo.h>
+#include "MemoryInitPeiLib.h"
+
VOID
BuildMemoryTypeInformationHob (
@@ -44,22 +46,79 @@ InitMmu (
}
}
-/*++
+STATIC
+UINTN
+GetDramSize (
+ IN VOID
+ )
+{
+ ARM_SMC_ARGS ArmSmcArgs;
-Routine Description:
+ ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
+ ArmSmcArgs.Arg1 = -1;
+ ArmCallSmc (&ArmSmcArgs);
+ if (ArmSmcArgs.Arg0) {
+ return 0;
+ } else {
+ return ArmSmcArgs.Arg1;
+ }
+}
-Arguments:
+STATIC
+EFI_STATUS
+GetDramRegionsInfo (
+ OUT DRAM_REGION_INFO *DramRegions,
+ IN UINT32 NumRegions
+ )
+{
+ ARM_SMC_ARGS ArmSmcArgs;
+ UINT32 Index;
+ UINTN RemainingDramSize;
+ UINTN BaseAddress;
+ UINTN Size;
- FileHandle - Handle of the file being invoked.
- PeiServices - Describes the list of possible PEI Services.
+ RemainingDramSize = GetDramSize ();
+ DEBUG ((DEBUG_INFO, "DRAM Total Size 0x%lx \n", RemainingDramSize));
-Returns:
+ // Ensure Total Dram Size is valid
+ ASSERT (RemainingDramSize != 0);
- Status - EFI_SUCCESS if the boot mode could be set
+ for (Index = 0; (RemainingDramSize != 0) && (Index < NumRegions); Index++) {
+ ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
+ ArmSmcArgs.Arg1 = Index;
---*/
+ ArmCallSmc (&ArmSmcArgs);
+
+ BaseAddress = ArmSmcArgs.Arg1;
+ Size = ArmSmcArgs.Arg2;
+ ASSERT (BaseAddress && Size);
+
+ DramRegions[Index].BaseAddress = BaseAddress;
+ DramRegions[Index].Size = Size;
+ RemainingDramSize -= Size;
+
+ DEBUG ((DEBUG_INFO, "DRAM Region[%d]: start 0x%lx, size 0x%lx\n",
+ Index, BaseAddress, Size));
+ }
+
+ // Ensure that all regions have been accounted for
+ ASSERT (RemainingDramSize == 0);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Get the installed RAM information.
+ Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
+
+ @param[in] UefiMemoryBase Base address of region used by UEFI in
+ permanent memory
+ @param[in] UefiMemorySize Size of the region used by UEFI in permanent memory
+
+ @return EFI_SUCCESS Successfuly Initialize MMU and Memory HOBs.
+**/
EFI_STATUS
EFIAPI
MemoryPeim (
@@ -67,11 +126,16 @@ MemoryPeim (
IN UINT64 UefiMemorySize
)
{
- ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
- EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
- EFI_PEI_HOB_POINTERS NextHob;
- BOOLEAN Found;
- DRAM_INFO DramInfo;
+ ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
+ INT32 Index;
+ UINTN BaseAddress;
+ UINTN Size;
+ UINTN Top;
+ DRAM_REGION_INFO DramRegions[MAX_DRAM_REGIONS];
+ EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
+ UINTN FdBase;
+ UINTN FdTop;
+ BOOLEAN FoundSystemMem;
// Get Virtual Memory Map from the Platform Library
ArmPlatformGetVirtualMemoryMap (&MemoryTable);
@@ -94,40 +158,94 @@ MemoryPeim (
EFI_RESOURCE_ATTRIBUTE_TESTED
);
- if (GetDramBankInfo (&DramInfo)) {
- DEBUG ((DEBUG_ERROR, "Failed to get DRAM information, exiting...\n"));
- return EFI_UNSUPPORTED;
- }
+ FoundSystemMem = FALSE;
+ ZeroMem (DramRegions, sizeof (DramRegions));
- while (DramInfo.NumOfDrams--) {
- //
- // Check if the resource for the main system memory has been declared
- //
- Found = FALSE;
- NextHob.Raw = GetHobList ();
- while ((NextHob.Raw = GetNextHob (EFI_HOB_TYPE_RESOURCE_DESCRIPTOR, NextHob.Raw)) != NULL) {
- if ((NextHob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) &&
- (DramInfo.DramRegion[DramInfo.NumOfDrams].BaseAddress >= NextHob.ResourceDescriptor->PhysicalStart) &&
- (NextHob.ResourceDescriptor->PhysicalStart + NextHob.ResourceDescriptor->ResourceLength <=
- DramInfo.DramRegion[DramInfo.NumOfDrams].BaseAddress + DramInfo.DramRegion[DramInfo.NumOfDrams].Size))
- {
- Found = TRUE;
- break;
+ GetDramRegionsInfo (DramRegions, ARRAY_SIZE (DramRegions));
+
+ FdBase = (UINTN)FixedPcdGet64 (PcdFdBaseAddress);
+ FdTop = FdBase + (UINTN)FixedPcdGet32 (PcdFdSize);
+
+ // Declare memory regios to system
+ // The DRAM region info is sorted based on the RAM address is SOC memory map.
+ // i.e. DramRegions[0] is at lower address, as compared to DramRegions[1].
+ // The goal to start from last region is to find the topmost RAM region that
+ // can contain UEFI DXE region i.e. PcdSystemMemoryUefiRegionSize.
+ // If UEFI were to allocate any reserved or runtime region, it would be
+ // allocated from topmost RAM region.
+ // This ensures that maximum amount of lower RAM (32 bit addresses) are left
+ // for OS to allocate to devices that can only work with 32bit physical
+ // addresses. E.g. legacy devices that need to DMA to 32bit addresses.
+ for (Index = MAX_DRAM_REGIONS - 1; Index >= 0; Index--) {
+ if (DramRegions[Index].Size == 0) {
+ continue;
+ }
+
+ BaseAddress = DramRegions[Index].BaseAddress;
+ Top = DramRegions[Index].BaseAddress + DramRegions[Index].Size;
+
+ // EDK2 does not have the concept of boot firmware copied into DRAM.
+ // To avoid the DXE core to overwrite this area we must create a memory
+ // allocation HOB for the region, but this only works if we split off the
+ // underlying resource descriptor as well.
+ if (FdBase >= BaseAddress && FdTop <= Top) {
+ // Update Size
+ Size = FdBase - BaseAddress;
+ if (Size) {
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ ResourceAttributes,
+ BaseAddress,
+ Size
+ );
}
- NextHob.Raw = GET_NEXT_HOB (NextHob);
- }
-
- if (!Found) {
- // Reserved the memory space occupied by the firmware volume
+ // create the System Memory HOB for the firmware
BuildResourceDescriptorHob (
EFI_RESOURCE_SYSTEM_MEMORY,
ResourceAttributes,
- DramInfo.DramRegion[DramInfo.NumOfDrams].BaseAddress,
- DramInfo.DramRegion[DramInfo.NumOfDrams].Size
+ FdBase,
+ PcdGet32 (PcdFdSize)
);
+ // Create the System Memory HOB for the remaining region (top of the FD)s
+ Size = Top - FdTop;
+ if (Size) {
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ ResourceAttributes,
+ FdTop,
+ Size
+ );
+ };
+ // Mark the memory covering the Firmware Device as boot services data
+ BuildMemoryAllocationHob (FixedPcdGet64 (PcdFdBaseAddress),
+ FixedPcdGet32 (PcdFdSize),
+ EfiBootServicesData);
+ } else {
+ BuildResourceDescriptorHob (
+ EFI_RESOURCE_SYSTEM_MEMORY,
+ ResourceAttributes,
+ DramRegions[Index].BaseAddress,
+ DramRegions[Index].Size
+ );
+ }
+
+ if (FoundSystemMem == TRUE) {
+ continue;
+ }
+
+ Size = DramRegions[Index].Size;
+
+ if (FdBase >= BaseAddress && FdTop <= Top) {
+ Size -= (UINTN)FixedPcdGet32 (PcdFdSize);
+ }
+
+ if ((UefiMemoryBase >= BaseAddress) && (Size >= UefiMemorySize)) {
+ FoundSystemMem = TRUE;
}
}
+ ASSERT (FoundSystemMem == TRUE);
+
// Build Memory Allocation Hob
InitMmu (MemoryTable);
diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
index 847331a63152..1ef99e8de25f 100644
--- a/Silicon/NXP/Library/SocLib/Chassis.c
+++ b/Silicon/NXP/Library/SocLib/Chassis.c
@@ -22,7 +22,6 @@
#include <Library/PrintLib.h>
#include <Library/SerialPortLib.h>
-#include <DramInfo.h>
#include "NxpChassis.h"
UINT32
@@ -75,69 +74,3 @@ SmmuInit (
MmioWrite32 ((UINTN)SMMU_REG_NSCR0, Value);
}
-UINTN
-GetDramSize (
- IN VOID
- )
-{
- ARM_SMC_ARGS ArmSmcArgs;
-
- ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
- ArmSmcArgs.Arg1 = -1;
-
- ArmCallSmc (&ArmSmcArgs);
-
- if (ArmSmcArgs.Arg0) {
- return 0;
- } else {
- return ArmSmcArgs.Arg1;
- }
-}
-
-EFI_STATUS
-GetDramBankInfo (
- IN OUT DRAM_INFO *DramInfo
- )
-{
- ARM_SMC_ARGS ArmSmcArgs;
- UINT32 I;
- UINTN DramSize;
-
- DramSize = GetDramSize ();
- DEBUG ((DEBUG_INFO, "DRAM Total Size 0x%lx \n", DramSize));
-
- // Ensure DramSize has been set
- ASSERT (DramSize != 0);
-
- I = 0;
-
- do {
- ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
- ArmSmcArgs.Arg1 = I;
-
- ArmCallSmc (&ArmSmcArgs);
- if (ArmSmcArgs.Arg0) {
- if (I > 0) {
- break;
- } else {
- ASSERT (ArmSmcArgs.Arg0 == 0);
- }
- }
-
- DramInfo->DramRegion[I].BaseAddress = ArmSmcArgs.Arg1;
- DramInfo->DramRegion[I].Size = ArmSmcArgs.Arg2;
-
- DramSize -= DramInfo->DramRegion[I].Size;
-
- DEBUG ((DEBUG_INFO, "bank[%d]: start 0x%lx, size 0x%lx\n",
- I, DramInfo->DramRegion[I].BaseAddress, DramInfo->DramRegion[I].Size));
-
- I++;
- } while (DramSize);
-
- DramInfo->NumOfDrams = I;
-
- DEBUG ((DEBUG_INFO, "Number Of DRAM in system %d \n", DramInfo->NumOfDrams));
-
- return EFI_SUCCESS;
-}
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 13/24] Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (11 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 12/24] Silicon/NXP: Move RAM retrieval from SocLib Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 9:19 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 14/24] Silicon/NXP: Use Clock retrieval PPI in modules Pankaj Bansal
` (11 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The SOC takes primary clocking input from the external signal (a clock
generator on board). The input (frequency) is multiplied using multiple
phase locked loops (PLL) to create a variety of frequencies which can
then be passed to a variety of internal logic, including cores and
peripheral IP modules.
Therefore, move the clock retrieval APIs to Platform Lib.
The Input clock is retrieved from board components in Platform Lib, and
passed on to SOC Lib APIs to get the correct clock for an IP (after PLL
multiplication).
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- sorted NXP_IP_CLOCK enum alphabetically
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 +
Silicon/NXP/Include/Library/SocLib.h | 44 ++++++++++++++++
Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h | 53 ++++++++++++++++++++
Silicon/NXP/LS1043A/Include/Soc.h | 11 ++++
Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c | 51 +++++++++++++++++++
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 52 +++++++++++++++++++
6 files changed, 212 insertions(+)
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
index 99d89498e0e2..3d38a7e58b91 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
@@ -17,6 +17,7 @@
ArmPkg/ArmPkg.dec
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ Silicon/NXP/LS1043A/LS1043A.dec
Silicon/NXP/NxpQoriqLs.dec
[LibraryClasses]
diff --git a/Silicon/NXP/Include/Library/SocLib.h b/Silicon/NXP/Include/Library/SocLib.h
new file mode 100644
index 000000000000..749aa230dec5
--- /dev/null
+++ b/Silicon/NXP/Include/Library/SocLib.h
@@ -0,0 +1,44 @@
+/** @file
+
+ Copyright 2020 NXP
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef SOC_LIB_H__
+#define SOC_LIB_H__
+
+#include <Uefi.h>
+#include <Ppi/NxpPlatformGetClock.h>
+
+/**
+ Return the input clock frequency to an IP Module.
+ This function reads the RCW bits and calculates the PLL multipler/divider
+ values to be applied to various IP modules.
+ If a module is disabled or doesn't exist on platform, then return zero.
+
+ @param[in] BaseClock Base clock to which PLL multipler/divider values is
+ to be applied.
+ @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
+ is to be retrieved.
+ @param[in] Args Variable argument list which is parsed based on
+ ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
+ the second argument will be interpreted as controller
+ number. e.g. if there are four i2c controllers in SOC,
+ then this value can be 0, 1, 2, 3
+ e.g. if ClockType is NXP_CORE_CLOCK, then second
+ argument is interpreted as cluster number and third
+ argument is interpreted as core number (within the
+ cluster)
+
+ @return Actual Clock Frequency. Return value 0 should be
+ interpreted as clock not being provided to IP.
+**/
+UINT64
+SocGetClock (
+ IN UINT64 BaseClock,
+ IN NXP_IP_CLOCK ClockType,
+ IN VA_LIST Args
+ );
+
+#endif // SOC_LIB_H__
diff --git a/Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h b/Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h
new file mode 100644
index 000000000000..bc086bc5b337
--- /dev/null
+++ b/Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h
@@ -0,0 +1,53 @@
+/** @file
+*
+* Copyright 2020 NXP
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#ifndef NXP_PLATFORM_PPI_H__
+#define NXP_PLATFORM_PPI_H__
+
+#include <Uefi.h>
+
+typedef enum _NXP_IP_CLOCK {
+ NXP_CORE_CLOCK,
+ NXP_I2C_CLOCK,
+ NXP_SYSTEM_CLOCK,
+ NXP_UART_CLOCK
+} NXP_IP_CLOCK;
+
+/**
+ Get the clocks supplied by Platform(Board) to NXP Layerscape SOC IPs
+
+ @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
+ is to be retrieved.
+ @param[in] ... Variable argument list which is parsed based on
+ ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
+ the second argument will be interpreted as controller
+ number. e.g. if there are four i2c controllers in SOC,
+ then this value can be 0, 1, 2, 3
+ e.g. if ClockType is NXP_CORE_CLOCK, then second
+ argument is interpreted as cluster number and third
+ argument is interpreted as core number (within the
+ cluster)
+
+ @return Actual Clock Frequency. Return value 0 should be
+ interpreted as clock not being provided to IP.
+**/
+typedef
+UINT64
+(EFIAPI * NXP_PLATFORM_GET_CLOCK)(
+ IN NXP_IP_CLOCK ClockType,
+ ...
+ );
+
+typedef struct {
+ NXP_PLATFORM_GET_CLOCK PlatformGetClock;
+} NXP_PLATFORM_GET_CLOCK_PPI;
+
+extern NXP_PLATFORM_GET_CLOCK_PPI gPlatformGetClockPpi;
+
+#endif // NXP_PLATFORM_PPI_H__
+
diff --git a/Silicon/NXP/LS1043A/Include/Soc.h b/Silicon/NXP/LS1043A/Include/Soc.h
index 441871757d67..e62de570da8a 100644
--- a/Silicon/NXP/LS1043A/Include/Soc.h
+++ b/Silicon/NXP/LS1043A/Include/Soc.h
@@ -8,6 +8,8 @@
#ifndef SOC_H__
#define SOC_H__
+#include <Chassis2/NxpSoc.h>
+
/**
Soc Memory Map
**/
@@ -41,4 +43,13 @@
#define LS1043A_I2C_SIZE 0x10000
#define LS1043A_I2C_NUM_CONTROLLERS 4
+#define LS1043A_DCFG_ADDRESS CHASSIS2_DCFG_ADDRESS
+
+/**
+ Reset Control Word (RCW) Bits
+**/
+#define SYS_PLL_RAT(x) (((x) & 0x7c) >> 2) // Bits 2-6
+
+typedef CCSR_GUR LS1043A_DEVICE_CONFIG;
+
#endif // SOC_H__
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
index 718c71bf02eb..7f5872a78cfc 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
@@ -12,10 +12,60 @@
**/
#include <Library/ArmPlatformLib.h>
+#include <Library/SocLib.h>
#include <Ppi/ArmMpCoreInfo.h>
+#include <Ppi/NxpPlatformGetClock.h>
extern VOID SocInit (VOID);
+/**
+ Get the clocks supplied by Platform(Board) to NXP Layerscape SOC IPs
+
+ @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
+ is to be retrieved.
+ @param[in] ... Variable argument list which is parsed based on
+ ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
+ the second argument will be interpreted as controller
+ number.
+ if ClockType is NXP_CORE_CLOCK, then second argument
+ is interpreted as cluster number and third argument is
+ interpreted as core number (within the cluster)
+
+ @return Actual Clock Frequency. Return value 0 should be
+ interpreted as clock not being provided to IP.
+**/
+UINT64
+EFIAPI
+NxpPlatformGetClock(
+ IN UINT32 ClockType,
+ ...
+ )
+{
+ UINT64 Clock;
+ VA_LIST Args;
+
+ Clock = 0;
+
+ VA_START (Args, ClockType);
+
+ switch (ClockType) {
+ case NXP_SYSTEM_CLOCK:
+ Clock = 100 * 1000 * 1000; // 100 MHz
+ break;
+ case NXP_I2C_CLOCK:
+ case NXP_UART_CLOCK:
+ Clock = NxpPlatformGetClock (NXP_SYSTEM_CLOCK);
+ Clock = SocGetClock (Clock, ClockType, Args);
+ break;
+ default:
+ break;
+ }
+
+ VA_END (Args);
+
+ return Clock;
+}
+
/**
Return the current Boot Mode
@@ -69,6 +119,7 @@ PrePeiCoreGetMpCoreInfo (
}
ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
+NXP_PLATFORM_GET_CLOCK_PPI gPlatformGetClockPpi = { NxpPlatformGetClock };
EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
{
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
index 98ca2e162f7b..480d8d18fb9f 100644
--- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
+++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
@@ -18,6 +18,8 @@
#include <Library/PcdLib.h>
#include <Library/PrintLib.h>
#include <Library/SerialPortLib.h>
+#include <Library/SocLib.h>
+#include <Soc.h>
/**
Calculate the frequency of various controllers and
@@ -50,6 +52,56 @@ GetSysInfo (
CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
}
+/**
+ Return the input clock frequency to an IP Module.
+ This function reads the RCW bits and calculates the PLL multipler/divider
+ values to be applied to various IP modules.
+ If a module is disabled or doesn't exist on platform, then return zero.
+
+ @param[in] BaseClock Base clock to which PLL multipler/divider values is
+ to be applied.
+ @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
+ is to be retrieved.
+ @param[in] Args Variable argument list which is parsed based on
+ ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
+ the second argument will be interpreted as controller
+ number. e.g. if there are four i2c controllers in SOC,
+ then this value can be 0, 1, 2, 3
+ e.g. if ClockType is NXP_CORE_CLOCK, then second
+ argument is interpreted as cluster number and third
+ argument is interpreted as core number (within the
+ cluster)
+
+ @return Actual Clock Frequency. Return value 0 should be
+ interpreted as clock not being provided to IP.
+**/
+UINT64
+SocGetClock (
+ IN UINT64 BaseClock,
+ IN NXP_IP_CLOCK ClockType,
+ IN VA_LIST Args
+ )
+{
+ LS1043A_DEVICE_CONFIG *Dcfg;
+ UINT32 RcwSr;
+ UINT64 ReturnValue;
+
+ ReturnValue = 0;
+ Dcfg = (LS1043A_DEVICE_CONFIG *)LS1043A_DCFG_ADDRESS;
+
+ switch (ClockType) {
+ case NXP_UART_CLOCK:
+ case NXP_I2C_CLOCK:
+ RcwSr = GurRead ((UINTN)&Dcfg->RcwSr[0]);
+ ReturnValue = BaseClock * SYS_PLL_RAT (RcwSr);
+ break;
+ default:
+ break;
+ }
+
+ return ReturnValue;
+}
+
/**
Function to initialize SoC specific constructs
**/
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 14/24] Silicon/NXP: Use Clock retrieval PPI in modules
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (12 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 13/24] Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 9:25 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs Pankaj Bansal
` (10 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Use NXP_PLATFORM_GET_CLOCK_PPI in various Layerscape IP modules.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- Added clock retrieval APIs to DUartPortLib
Silicon/NXP/NxpQoriqLs.dec | 5 ----
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 2 --
Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 2 +-
Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf | 5 ++--
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 -
Silicon/NXP/Drivers/I2cDxe/I2cDxe.h | 6 ----
Silicon/NXP/Include/Chassis2/NxpSoc.h | 9 ------
Silicon/NXP/Library/DUartPortLib/DUart.h | 8 +----
Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 3 +-
Silicon/NXP/Library/DUartPortLib/DUartPortLib.c | 7 ++---
Silicon/NXP/Library/SocLib/Chassis.c | 15 ----------
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 31 --------------------
12 files changed, 9 insertions(+), 85 deletions(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index b478560450b3..2ac047a89274 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -22,11 +22,6 @@
gNxpNonDiscoverableI2cMasterGuid = { 0x5f2c099c, 0x54a3, 0x4dd4, {0x9e, 0xc5, 0xe9, 0x12, 0x8c, 0x36, 0x81, 0x6a}}
[PcdsFixedAtBuild.common]
- #
- # Platform PCDs
- #
- gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x0|UINT32|0x00000250
-
#
# Pcds to support Big Endian IPs
#
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
index e5383aaf0cc5..d486c9b36fab 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
@@ -39,8 +39,6 @@
gArmTokenSpaceGuid.PcdSystemMemorySize|0x7BE00000
gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
- gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x1
-
#
# RTC Pcds
#
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
index 867376044656..3bf7a8124fc6 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
@@ -25,13 +25,13 @@
[LibraryClasses]
ArmLib
+ ArmPlatformLib
BaseMemoryLib
DevicePathLib
I2cLib
IoLib
MemoryAllocationLib
PcdLib
- SocLib
TimerLib
UefiBootServicesTableLib
UefiDriverEntryPoint
diff --git a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
index 7a2fa619b027..b8a77ae05243 100644
--- a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
+++ b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
@@ -3,7 +3,7 @@
# Component description file for DUartPortLib module
#
# Copyright (c) 2013, Freescale Ltd. All rights reserved.
-# Copyright 2017 NXP
+# Copyright 2017, 2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -20,8 +20,8 @@
DUartPortLib.c
[LibraryClasses]
+ ArmPlatformLib
PcdLib
- SocLib
[Packages]
MdeModulePkg/MdeModulePkg.dec
@@ -31,4 +31,3 @@
[Pcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
- gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
index 3d38a7e58b91..bb15e0a3d710 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
@@ -36,4 +36,3 @@
[FixedPcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian
- gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
index 88316f313380..7c4a306c16a0 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
@@ -37,12 +37,6 @@ typedef struct {
NON_DISCOVERABLE_DEVICE *Dev;
} NXP_I2C_MASTER;
-extern
-UINT64
-GetBusFrequency (
- VOID
- );
-
EFI_STATUS
NxpI2cInit (
IN EFI_HANDLE DriverBindingHandle,
diff --git a/Silicon/NXP/Include/Chassis2/NxpSoc.h b/Silicon/NXP/Include/Chassis2/NxpSoc.h
index 6812beafe447..3f00a2614131 100644
--- a/Silicon/NXP/Include/Chassis2/NxpSoc.h
+++ b/Silicon/NXP/Include/Chassis2/NxpSoc.h
@@ -27,10 +27,6 @@
#define SACR_PAGESIZE_MASK 0x00010000
#define IDR1_PAGESIZE_MASK 0x80000000
-typedef struct {
- UINTN FreqSystemBus;
-} SYS_INFO;
-
/* Device Configuration and Pin Control */
typedef struct {
UINT8 Res0[0x100-0x00];
@@ -39,11 +35,6 @@ typedef struct {
#define CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
} CCSR_GUR;
-VOID
-GetSysInfo (
- OUT SYS_INFO *
- );
-
UINT32
EFIAPI
GurRead (
diff --git a/Silicon/NXP/Library/DUartPortLib/DUart.h b/Silicon/NXP/Library/DUartPortLib/DUart.h
index c71e2ce55d1d..aca7cd8d3f01 100644
--- a/Silicon/NXP/Library/DUartPortLib/DUart.h
+++ b/Silicon/NXP/Library/DUartPortLib/DUart.h
@@ -5,7 +5,7 @@
*
* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
* Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
-* Copyright 2017 NXP
+* Copyright 2017, 2020 NXP
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -113,10 +113,4 @@
#define USCR 0x7
#define UDSR 0x10
-extern
-UINT64
-GetBusFrequency (
- VOID
- );
-
#endif /* DUART_H_ */
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
index a5aba47b3ed4..30804450d2b7 100644
--- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
@@ -17,6 +17,7 @@
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/UefiRuntimeLib.h>
+#include <Ppi/NxpPlatformGetClock.h>
#include "I2cDxe.h"
@@ -51,7 +52,7 @@ SetBusFrequency (
I2cBase = (UINTN)(I2c->Dev->Resources[0].AddrRangeMin);
- I2cClock = GetBusFrequency ();
+ I2cClock = gPlatformGetClockPpi.PlatformGetClock (NXP_I2C_CLOCK, 0);
I2cInitialize (I2cBase, I2cClock, *BusClockHertz);
diff --git a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c
index c3c738d3cca8..f9c2c44a4c3b 100644
--- a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c
+++ b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c
@@ -6,7 +6,7 @@
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
Copyright (c) 2012 - 2013, ARM Ltd. All rights reserved.<BR>
Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
- Copyright 2017 NXP
+ Copyright 2017, 2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -16,6 +16,7 @@
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/SerialPortLib.h>
+#include <Ppi/NxpPlatformGetClock.h>
#include "DUart.h"
@@ -169,10 +170,8 @@ CalculateBaudDivisor (
)
{
UINTN DUartClk;
- UINTN FreqSystemBus;
- FreqSystemBus = GetBusFrequency ();
- DUartClk = FreqSystemBus/PcdGet32(PcdPlatformFreqDiv);
+ DUartClk = gPlatformGetClockPpi.PlatformGetClock (NXP_UART_CLOCK, 0);
return ((DUartClk)/(BaudRate * 16));
}
diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
index 1ef99e8de25f..90677f0f36ca 100644
--- a/Silicon/NXP/Library/SocLib/Chassis.c
+++ b/Silicon/NXP/Library/SocLib/Chassis.c
@@ -37,21 +37,6 @@ GurRead (
}
}
-/*
- * Return system bus frequency
- */
-UINT64
-GetBusFrequency (
- VOID
- )
-{
- SYS_INFO SocSysInfo;
-
- GetSysInfo (&SocSysInfo);
-
- return SocSysInfo.FreqSystemBus;
-}
-
/*
* Setup SMMU in bypass mode
* and also set its pagesize
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
index 480d8d18fb9f..b14ada7f595d 100644
--- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
+++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
@@ -21,37 +21,6 @@
#include <Library/SocLib.h>
#include <Soc.h>
-/**
- Calculate the frequency of various controllers and
- populate the passed structure with frequuencies.
-
- @param PtrSysInfo Input structure to populate with
- frequencies.
-**/
-VOID
-GetSysInfo (
- OUT SYS_INFO *PtrSysInfo
- )
-{
- CCSR_GUR *GurBase;
- UINTN SysClk;
-
- GurBase = (CCSR_GUR *)CHASSIS2_DCFG_ADDRESS;
- SysClk = CLK_FREQ;
-
- SetMem (PtrSysInfo, sizeof (SYS_INFO), 0);
-
- PtrSysInfo->FreqSystemBus = SysClk;
-
- //
- // selects the platform clock:SYSCLK ratio and calculate
- // system frequency
- //
- PtrSysInfo->FreqSystemBus *= (GurRead ((UINTN)&GurBase->RcwSr[0]) >>
- CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
- CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
-}
-
/**
Return the input clock frequency to an IP Module.
This function reads the RCW bits and calculates the PLL multipler/divider
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (13 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 14/24] Silicon/NXP: Use Clock retrieval PPI in modules Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 9:27 ` Leif Lindholm
2020-04-23 10:11 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package Pankaj Bansal
` (9 subsequent siblings)
24 siblings, 2 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The SwapMmio** APIs are supposed to be called indirectly via
GetMmioOperations** APIs.
Therefore, remove the SwapMmio** APIs from IoAccessLib.h and make
these APIs STATIC to IoAccessLib.c, so that no accidental call can
be made to these.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- New commit
Silicon/NXP/Include/Library/IoAccessLib.h | 236 +-------------------
Silicon/NXP/Library/IoAccessLib/IoAccessLib.c | 17 +-
Silicon/NXP/Library/SocLib/Chassis.c | 10 +-
3 files changed, 22 insertions(+), 241 deletions(-)
diff --git a/Silicon/NXP/Include/Library/IoAccessLib.h b/Silicon/NXP/Include/Library/IoAccessLib.h
index 0b708d544fa7..7b490744382c 100644
--- a/Silicon/NXP/Include/Library/IoAccessLib.h
+++ b/Silicon/NXP/Include/Library/IoAccessLib.h
@@ -1,6 +1,6 @@
/** @file
*
- * Copyright 2017-2019 NXP
+ * Copyright 2017-2020 NXP
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -89,238 +89,4 @@ GetMmioOperations64 (
IN BOOLEAN Swap
);
-/**
- MmioRead16 for Big-Endian modules.
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT16
-EFIAPI
-SwapMmioRead16 (
- IN UINTN Address
- );
-
-/**
- MmioRead32 for Big-Endian modules.
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT32
-EFIAPI
-SwapMmioRead32 (
- IN UINTN Address
- );
-
-/**
- MmioRead64 for Big-Endian modules.
-
- @param Address The MMIO register to read.
-
- @return The value read.
-
-**/
-UINT64
-EFIAPI
-SwapMmioRead64 (
- IN UINTN Address
- );
-
-/**
- MmioWrite16 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-SwapMmioWrite16 (
- IN UINTN Address,
- IN UINT16 Value
- );
-
-/**
- MmioWrite32 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-SwapMmioWrite32 (
- IN UINTN Address,
- IN UINT32 Value
- );
-
-/**
- MmioWrite64 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param Value The value to write to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-SwapMmioWrite64 (
- IN UINTN Address,
- IN UINT64 Value
- );
-
-/**
- MmioAndThenOr16 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-SwapMmioAndThenOr16 (
- IN UINTN Address,
- IN UINT16 AndData,
- IN UINT16 OrData
- );
-
-/**
- MmioAndThenOr32 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-SwapMmioAndThenOr32 (
- IN UINTN Address,
- IN UINT32 AndData,
- IN UINT32 OrData
- );
-
-/**
- MmioAndThenOr64 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
- @param OrData The value to OR with the result of the AND operation.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-SwapMmioAndThenOr64 (
- IN UINTN Address,
- IN UINT64 AndData,
- IN UINT64 OrData
- );
-
-/**
- MmioOr16 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-SwapMmioOr16 (
- IN UINTN Address,
- IN UINT16 OrData
- );
-
-/**
- MmioOr32 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-SwapMmioOr32 (
- IN UINTN Address,
- IN UINT32 OrData
- );
-
-/**
- MmioOr64 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param OrData The value to OR with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-SwapMmioOr64 (
- IN UINTN Address,
- IN UINT64 OrData
- );
-
-/**
- MmioAnd16 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT16
-EFIAPI
-SwapMmioAnd16 (
- IN UINTN Address,
- IN UINT16 AndData
- );
-
-/**
- MmioAnd32 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT32
-EFIAPI
-SwapMmioAnd32 (
- IN UINTN Address,
- IN UINT32 AndData
- );
-
-/**
- MmioAnd64 for Big-Endian modules.
-
- @param Address The MMIO register to write.
- @param AndData The value to AND with the read value from the MMIO register.
-
- @return The value written back to the MMIO register.
-
-**/
-UINT64
-EFIAPI
-SwapMmioAnd64 (
- IN UINTN Address,
- IN UINT64 AndData
- );
-
#endif /* IO_ACCESS_LIB_H_ */
diff --git a/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c b/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c
index 6ed83d019a6e..bb4a93b6f09a 100644
--- a/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c
+++ b/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c
@@ -2,7 +2,7 @@
Provide MMIO APIs for BE modules.
- Copyright 2017-2019 NXP
+ Copyright 2017-2020 NXP
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -21,6 +21,7 @@
@return The value read.
**/
+STATIC
UINT16
EFIAPI
SwapMmioRead16 (
@@ -38,6 +39,7 @@ SwapMmioRead16 (
@return The value read.
**/
+STATIC
UINT32
EFIAPI
SwapMmioRead32 (
@@ -55,6 +57,7 @@ SwapMmioRead32 (
@return The value read.
**/
+STATIC
UINT64
EFIAPI
SwapMmioRead64 (
@@ -71,6 +74,7 @@ SwapMmioRead64 (
@param Value The value to write to the MMIO register.
**/
+STATIC
UINT16
EFIAPI
SwapMmioWrite16 (
@@ -88,6 +92,7 @@ SwapMmioWrite16 (
@param Value The value to write to the MMIO register.
**/
+STATIC
UINT32
EFIAPI
SwapMmioWrite32 (
@@ -105,6 +110,7 @@ SwapMmioWrite32 (
@param Value The value to write to the MMIO register.
**/
+STATIC
UINT64
EFIAPI
SwapMmioWrite64 (
@@ -125,6 +131,7 @@ SwapMmioWrite64 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT16
EFIAPI
SwapMmioAndThenOr16 (
@@ -149,6 +156,7 @@ SwapMmioAndThenOr16 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT32
EFIAPI
SwapMmioAndThenOr32 (
@@ -173,6 +181,7 @@ SwapMmioAndThenOr32 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT64
EFIAPI
SwapMmioAndThenOr64 (
@@ -196,6 +205,7 @@ SwapMmioAndThenOr64 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT16
EFIAPI
SwapMmioOr16 (
@@ -215,6 +225,7 @@ SwapMmioOr16 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT32
EFIAPI
SwapMmioOr32 (
@@ -234,6 +245,7 @@ SwapMmioOr32 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT64
EFIAPI
SwapMmioOr64 (
@@ -253,6 +265,7 @@ SwapMmioOr64 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT16
EFIAPI
SwapMmioAnd16 (
@@ -272,6 +285,7 @@ SwapMmioAnd16 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT32
EFIAPI
SwapMmioAnd32 (
@@ -291,6 +305,7 @@ SwapMmioAnd32 (
@return The value written back to the MMIO register.
**/
+STATIC
UINT64
EFIAPI
SwapMmioAnd64 (
diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
index 90677f0f36ca..d7bc55c9d275 100644
--- a/Silicon/NXP/Library/SocLib/Chassis.c
+++ b/Silicon/NXP/Library/SocLib/Chassis.c
@@ -30,11 +30,11 @@ GurRead (
IN UINTN Address
)
{
- if (FixedPcdGetBool (PcdGurBigEndian)) {
- return SwapMmioRead32 (Address);
- } else {
- return MmioRead32 (Address);
- }
+ MMIO_OPERATIONS_32 *GurOps;
+
+ GurOps = GetMmioOperations32 (FixedPcdGetBool (PcdGurBigEndian));
+
+ return GurOps->Read32 (Address);
}
/*
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (14 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 10:27 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 17/24] Silicon/NXP/LS1043A: Use ChassisLib from Chassis2 Pkg Pankaj Bansal
` (8 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
A Chassis is a base framework used for building SoCs.
We can think of Chassis/Soc/Platform(a.k.a Borad) in Object model terms.
Chassis is base. Soc is based on some Chassis.
Platform is based on some Soc.
SOCs that are designed around same chassis, reuse most of the components.
Therefore, add the package for Chassis2. LS1043A and LS1046A SOCs belong
to Chassis2.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- in patch description Oops -> Object model
- Sorted includes alphabetically
- removed direct calls to SwapMmio** APIs and used GetMmioOperations**
Silicon/NXP/Chassis2/Chassis2.dec | 23 +++++
Silicon/NXP/NxpQoriqLs.dec | 4 +
Silicon/NXP/Chassis2/Chassis2.dsc.inc | 10 ++
Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf | 34 +++++++
Silicon/NXP/Chassis2/Include/Chassis.h | 34 +++++++
Silicon/NXP/Include/Library/ChassisLib.h | 51 ++++++++++
Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c | 97 ++++++++++++++++++++
7 files changed, 253 insertions(+)
diff --git a/Silicon/NXP/Chassis2/Chassis2.dec b/Silicon/NXP/Chassis2/Chassis2.dec
new file mode 100644
index 000000000000..a0048bd784ea
--- /dev/null
+++ b/Silicon/NXP/Chassis2/Chassis2.dec
@@ -0,0 +1,23 @@
+# @file
+# NXP Layerscape processor package.
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+[Defines]
+ DEC_SPECIFICATION = 1.27
+ PACKAGE_VERSION = 0.1
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+# Comments are used for Keywords and Module Types.
+#
+#
+################################################################################
+[Includes.common]
+ Include # Root include for the package
+
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index 2ac047a89274..3e79f502c127 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -14,6 +14,9 @@
Include
[LibraryClasses]
+ ## @libraryclass Provides Chassis specific functions to other modules
+ ChassisLib|Include/Library/ChassisLib.h
+
## @libraryclass Provides services to read/write to I2c devices
I2cLib|Include/Library/I2cLib.h
@@ -29,4 +32,5 @@
[PcdsFeatureFlag]
gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203|FALSE|BOOLEAN|0x00000315
+ gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian|FALSE|BOOLEAN|0x00000316
diff --git a/Silicon/NXP/Chassis2/Chassis2.dsc.inc b/Silicon/NXP/Chassis2/Chassis2.dsc.inc
new file mode 100644
index 000000000000..db8e5a92eacb
--- /dev/null
+++ b/Silicon/NXP/Chassis2/Chassis2.dsc.inc
@@ -0,0 +1,10 @@
+# @file
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+[LibraryClasses.common]
+ ChassisLib|Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
diff --git a/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
new file mode 100644
index 000000000000..2bb16af53134
--- /dev/null
+++ b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
@@ -0,0 +1,34 @@
+# @file
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier: BSD-2-Clause
+#
+#
+
+[Defines]
+ INF_VERSION = 1.27
+ BASE_NAME = Chassis2Lib
+ FILE_GUID = fae0d077-5fc2-494f-b8e1-c51a3023ee3e
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ChassisLib
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/NXP/Chassis2/Chassis2.dec
+ Silicon/NXP/NxpQoriqLs.dec
+
+[LibraryClasses]
+ IoAccessLib
+ IoLib
+ PcdLib
+ SerialPortLib
+
+[Sources.common]
+ ChassisLib.c
+
+[FeaturePcd]
+ gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian
+
diff --git a/Silicon/NXP/Chassis2/Include/Chassis.h b/Silicon/NXP/Chassis2/Include/Chassis.h
new file mode 100644
index 000000000000..72bd97efd004
--- /dev/null
+++ b/Silicon/NXP/Chassis2/Include/Chassis.h
@@ -0,0 +1,34 @@
+/** @file
+
+ Copyright 2020 NXP
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+#ifndef CHASSIS_H__
+#define CHASSIS_H__
+
+#define NXP_LAYERSCAPE_CHASSIS2_DCFG_ADDRESS 0x1EE0000
+
+/* SMMU Defintions */
+#define SMMU_BASE_ADDR 0x09000000
+#define SMMU_REG_SCR0 (SMMU_BASE_ADDR + 0x0)
+#define SMMU_REG_SACR (SMMU_BASE_ADDR + 0x10)
+#define SMMU_REG_NSCR0 (SMMU_BASE_ADDR + 0x400)
+
+#define SCR0_USFCFG_MASK 0x00000400
+#define SCR0_CLIENTPD_MASK 0x00000001
+#define SACR_PAGESIZE_MASK 0x00010000
+
+/**
+ The Device Configuration Unit provides general purpose configuration and
+ status for the device. These registers only support 32-bit accesses.
+**/
+#pragma pack(1)
+typedef struct {
+ UINT8 Reserved0[0x100 - 0x0];
+ UINT32 RcwSr[16]; // Reset Control Word Status Register
+} NXP_LAYERSCAPE_CHASSIS2_DEVICE_CONFIG;
+#pragma pack()
+
+#endif // CHASSIS_H__
diff --git a/Silicon/NXP/Include/Library/ChassisLib.h b/Silicon/NXP/Include/Library/ChassisLib.h
new file mode 100644
index 000000000000..89992a4b6fd5
--- /dev/null
+++ b/Silicon/NXP/Include/Library/ChassisLib.h
@@ -0,0 +1,51 @@
+/** @file
+ Chassis Lib to provide Chessis specific functionality to all SOCs in
+ a Chassis.
+
+ Copyright 2020 NXP
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef CHASSIS_LIB_H__
+#define CHASSIS_LIB_H__
+
+#include <Chassis.h>
+
+/**
+ Read Dcfg register
+
+ @param Address The MMIO register to read.
+
+ @return The value read.
+**/
+UINT32
+EFIAPI
+DcfgRead32 (
+ IN UINTN Address
+ );
+
+/**
+ Write Dcfg register
+
+ @param Address The MMIO register to write.
+ @param Value The value to write to the MMIO register.
+
+ @return Value.
+**/
+UINT32
+EFIAPI
+DcfgWrite32 (
+ IN UINTN Address,
+ IN UINT32 Value
+ );
+
+/**
+ Function to initialize Chassis Specific functions
+ **/
+VOID
+ChassisInit (
+ VOID
+ );
+
+#endif // CHASSIS_LIB_H__
diff --git a/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c
new file mode 100644
index 000000000000..b3bb25029dd2
--- /dev/null
+++ b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c
@@ -0,0 +1,97 @@
+/** @file
+ Chassis specific functions common to all SOCs based on a specific Chessis
+
+ Copyright 2020 NXP
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Chassis.h>
+#include <Uefi.h>
+#include <Library/IoAccessLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/SerialPortLib.h>
+
+/**
+ Read Dcfg register
+
+ @param Address The MMIO register to read.
+
+ @return The value read.
+**/
+UINT32
+EFIAPI
+DcfgRead32 (
+ IN UINTN Address
+ )
+{
+ MMIO_OPERATIONS_32 *DcfgOps;
+
+ DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
+
+ return DcfgOps->Read32 (Address);
+}
+
+/**
+ Write Dcfg register
+
+ @param Address The MMIO register to write.
+ @param Value The value to write to the MMIO register.
+
+ @return Value.
+**/
+UINT32
+EFIAPI
+DcfgWrite32 (
+ IN UINTN Address,
+ IN UINT32 Value
+ )
+{
+ MMIO_OPERATIONS_32 *DcfgOps;
+
+ DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
+
+ return DcfgOps->Write32 (Address, Value);
+}
+
+/*
+ * Setup SMMU in bypass mode
+ * and also set its pagesize
+ */
+STATIC
+VOID
+SmmuInit (
+ VOID
+ )
+{
+ UINT32 Value;
+
+ /* set pagesize as 64K and ssmu-500 in bypass mode */
+ Value = (MmioRead32 ((UINTN)SMMU_REG_SACR) | SACR_PAGESIZE_MASK);
+ MmioWrite32 ((UINTN)SMMU_REG_SACR, Value);
+
+ Value = (MmioRead32 ((UINTN)SMMU_REG_SCR0) | SCR0_CLIENTPD_MASK);
+ Value &= ~SCR0_USFCFG_MASK;
+ MmioWrite32 ((UINTN)SMMU_REG_SCR0, Value);
+
+ Value = (MmioRead32 ((UINTN)SMMU_REG_NSCR0) | SCR0_CLIENTPD_MASK);
+ Value &= ~SCR0_USFCFG_MASK;
+ MmioWrite32 ((UINTN)SMMU_REG_NSCR0, Value);
+}
+
+/**
+ Function to initialize Chassis Specific functions
+ **/
+VOID
+ChassisInit (
+ VOID
+ )
+{
+ //
+ // Early init serial Port to get board information.
+ //
+ SerialPortInitialize ();
+
+ SmmuInit ();
+}
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 17/24] Silicon/NXP/LS1043A: Use ChassisLib from Chassis2 Pkg
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (15 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 18/24] Silicon/NXP/LS1043A: Move SocLib to Soc Package Pankaj Bansal
` (7 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Now the we have added Chassis Package, move the chassis specific common
code for all SOCs belonging to same chassis to ChassisLib.
Use ChassisLib APIs in SocLib.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/NXP/NxpQoriqLs.dec | 6 --
Silicon/NXP/LS1043A/LS1043A.dsc.inc | 9 ++-
Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf | 1 +
Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf | 1 +
Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 15 +----
Silicon/NXP/Include/Chassis2/NxpSoc.h | 44 --------------
Silicon/NXP/LS1043A/Include/Soc.h | 6 +-
Silicon/NXP/Library/SocLib/NxpChassis.h | 22 -------
Silicon/NXP/Library/SocLib/Chassis.c | 61 --------------------
Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 19 +-----
10 files changed, 14 insertions(+), 170 deletions(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index 3e79f502c127..71e43c1ffd86 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -24,12 +24,6 @@
gNxpQoriqLsTokenSpaceGuid = {0x98657342, 0x4aee, 0x4fc6, {0xbc, 0xb5, 0xff, 0x45, 0xb7, 0xa8, 0x71, 0xf2}}
gNxpNonDiscoverableI2cMasterGuid = { 0x5f2c099c, 0x54a3, 0x4dd4, {0x9e, 0xc5, 0xe9, 0x12, 0x8c, 0x36, 0x81, 0x6a}}
-[PcdsFixedAtBuild.common]
- #
- # Pcds to support Big Endian IPs
- #
- gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian|FALSE|BOOLEAN|0x0000311
-
[PcdsFeatureFlag]
gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203|FALSE|BOOLEAN|0x00000315
gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian|FALSE|BOOLEAN|0x00000316
diff --git a/Silicon/NXP/LS1043A/LS1043A.dsc.inc b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
index 7690e4caa593..ea0854f967a3 100644
--- a/Silicon/NXP/LS1043A/LS1043A.dsc.inc
+++ b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
@@ -7,6 +7,8 @@
#
#
+!include Silicon/NXP/Chassis2/Chassis2.dsc.inc
+
[LibraryClasses.common]
SocLib|Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
SerialPortLib|Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
@@ -26,9 +28,6 @@
[PcdsFixedAtBuild.common]
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x021c0500
- #
- # Big Endian IPs
- #
- gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian|TRUE
-
+[PcdsFeatureFlag]
+ gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian|TRUE
##
diff --git a/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf b/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf
index 038d48949a39..e522db81e5c0 100644
--- a/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf
+++ b/Platform/NXP/LS1043aRdbPkg/Drivers/PlatformDxe/PlatformDxe.inf
@@ -24,6 +24,7 @@
MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec
+ Silicon/NXP/Chassis2/Chassis2.dec
Silicon/NXP/LS1043A/LS1043A.dec
Silicon/NXP/NxpQoriqLs.dec
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
index 7a43ad86d183..07ca6b34445f 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
@@ -19,6 +19,7 @@
ArmPlatformPkg/ArmPlatformPkg.dec
EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
+ Silicon/NXP/Chassis2/Chassis2.dec
Silicon/NXP/LS1043A/LS1043A.dec
Silicon/NXP/NxpQoriqLs.dec
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
index bb15e0a3d710..1d042bbfc4e4 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
@@ -14,25 +14,14 @@
LIBRARY_CLASS = SocLib
[Packages]
- ArmPkg/ArmPkg.dec
- MdeModulePkg/MdeModulePkg.dec
MdePkg/MdePkg.dec
+ Silicon/NXP/Chassis2/Chassis2.dec
Silicon/NXP/LS1043A/LS1043A.dec
Silicon/NXP/NxpQoriqLs.dec
[LibraryClasses]
- BaseLib
+ ChassisLib
DebugLib
- IoAccessLib
- SerialPortLib
[Sources.common]
- Chassis.c
Chassis2/Soc.c
-
-[BuildOptions]
- GCC:*_*_*_CC_FLAGS = -DCHASSIS2
-
-[FixedPcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
- gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian
diff --git a/Silicon/NXP/Include/Chassis2/NxpSoc.h b/Silicon/NXP/Include/Chassis2/NxpSoc.h
deleted file mode 100644
index 3f00a2614131..000000000000
--- a/Silicon/NXP/Include/Chassis2/NxpSoc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/** Soc.h
-* Header defining the Base addresses, sizes, flags etc for chassis 1
-*
-* Copyright 2017-2020 NXP
-*
-* SPDX-License-Identifier: BSD-2-Clause-Patent
-*
-**/
-
-#ifndef NXP_SOC_H_
-#define NXP_SOC_H_
-
-#define CLK_FREQ 100000000
-
-#define CHASSIS2_DCFG_ADDRESS 0x1EE0000
-
-/* SMMU Defintions */
-#define SMMU_BASE_ADDR 0x09000000
-#define SMMU_REG_SCR0 (SMMU_BASE_ADDR + 0x0)
-#define SMMU_REG_SACR (SMMU_BASE_ADDR + 0x10)
-#define SMMU_REG_IDR1 (SMMU_BASE_ADDR + 0x24)
-#define SMMU_REG_NSCR0 (SMMU_BASE_ADDR + 0x400)
-#define SMMU_REG_NSACR (SMMU_BASE_ADDR + 0x410)
-
-#define SCR0_USFCFG_MASK 0x00000400
-#define SCR0_CLIENTPD_MASK 0x00000001
-#define SACR_PAGESIZE_MASK 0x00010000
-#define IDR1_PAGESIZE_MASK 0x80000000
-
-/* Device Configuration and Pin Control */
-typedef struct {
- UINT8 Res0[0x100-0x00];
- UINT32 RcwSr[16]; /* Reset control word status */
-#define CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25
-#define CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
-} CCSR_GUR;
-
-UINT32
-EFIAPI
-GurRead (
- IN UINTN Address
- );
-
-#endif /* NXP_SOC_H_ */
diff --git a/Silicon/NXP/LS1043A/Include/Soc.h b/Silicon/NXP/LS1043A/Include/Soc.h
index e62de570da8a..97a77d3f5da6 100644
--- a/Silicon/NXP/LS1043A/Include/Soc.h
+++ b/Silicon/NXP/LS1043A/Include/Soc.h
@@ -8,7 +8,7 @@
#ifndef SOC_H__
#define SOC_H__
-#include <Chassis2/NxpSoc.h>
+#include <Chassis.h>
/**
Soc Memory Map
@@ -43,13 +43,13 @@
#define LS1043A_I2C_SIZE 0x10000
#define LS1043A_I2C_NUM_CONTROLLERS 4
-#define LS1043A_DCFG_ADDRESS CHASSIS2_DCFG_ADDRESS
+#define LS1043A_DCFG_ADDRESS NXP_LAYERSCAPE_CHASSIS2_DCFG_ADDRESS
/**
Reset Control Word (RCW) Bits
**/
#define SYS_PLL_RAT(x) (((x) & 0x7c) >> 2) // Bits 2-6
-typedef CCSR_GUR LS1043A_DEVICE_CONFIG;
+typedef NXP_LAYERSCAPE_CHASSIS2_DEVICE_CONFIG LS1043A_DEVICE_CONFIG;
#endif // SOC_H__
diff --git a/Silicon/NXP/Library/SocLib/NxpChassis.h b/Silicon/NXP/Library/SocLib/NxpChassis.h
deleted file mode 100644
index 836df103f80f..000000000000
--- a/Silicon/NXP/Library/SocLib/NxpChassis.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/** @file
-* Header defining the Base addresses, sizes, flags etc for chassis 1
-*
-* Copyright 2017-2020 NXP
-*
-* SPDX-License-Identifier: BSD-2-Clause-Patent
-*
-**/
-
-#ifndef NXP_CHASSIS_H_
-#define NXP_CHASSIS_H_
-
-/*
- * Setup SMMU in bypass mode
- * and also set its pagesize
- */
-VOID
-SmmuInit (
- VOID
- );
-
-#endif /* NXP_CHASSIS_H_ */
diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
deleted file mode 100644
index d7bc55c9d275..000000000000
--- a/Silicon/NXP/Library/SocLib/Chassis.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/** @file
- SoC specific Library containg functions to initialize various SoC components
-
- Copyright 2017-2020 NXP
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include <Base.h>
-#ifdef CHASSIS2
-#include <Chassis2/NxpSoc.h>
-#elif CHASSIS3
-#include <Chassis3/NxpSoc.h>
-#endif
-#include <Library/ArmSmcLib.h>
-#include <Library/BaseLib.h>
-#include <Library/IoAccessLib.h>
-#include <Library/DebugLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/PrintLib.h>
-#include <Library/SerialPortLib.h>
-
-#include "NxpChassis.h"
-
-UINT32
-EFIAPI
-GurRead (
- IN UINTN Address
- )
-{
- MMIO_OPERATIONS_32 *GurOps;
-
- GurOps = GetMmioOperations32 (FixedPcdGetBool (PcdGurBigEndian));
-
- return GurOps->Read32 (Address);
-}
-
-/*
- * Setup SMMU in bypass mode
- * and also set its pagesize
- */
-VOID
-SmmuInit (
- VOID
- )
-{
- UINT32 Value;
-
- /* set pagesize as 64K and ssmu-500 in bypass mode */
- Value = (MmioRead32 ((UINTN)SMMU_REG_SACR) | SACR_PAGESIZE_MASK);
- MmioWrite32 ((UINTN)SMMU_REG_SACR, Value);
-
- Value = (MmioRead32 ((UINTN)SMMU_REG_SCR0) | SCR0_CLIENTPD_MASK) & ~SCR0_USFCFG_MASK;
- MmioWrite32 ((UINTN)SMMU_REG_SCR0, Value);
-
- Value = (MmioRead32 ((UINTN)SMMU_REG_NSCR0) | SCR0_CLIENTPD_MASK) & ~SCR0_USFCFG_MASK;
- MmioWrite32 ((UINTN)SMMU_REG_NSCR0, Value);
-}
-
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
index b14ada7f595d..a50c072e84d5 100644
--- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
+++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
@@ -8,16 +8,8 @@
**/
#include <Base.h>
-#include <NxpChassis.h>
-#include <Chassis2/NxpSoc.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
+#include <Library/ChassisLib.h>
#include <Library/DebugLib.h>
-#include <Library/IoAccessLib.h>
-#include <Library/IoLib.h>
-#include <Library/PcdLib.h>
-#include <Library/PrintLib.h>
-#include <Library/SerialPortLib.h>
#include <Library/SocLib.h>
#include <Soc.h>
@@ -61,7 +53,7 @@ SocGetClock (
switch (ClockType) {
case NXP_UART_CLOCK:
case NXP_I2C_CLOCK:
- RcwSr = GurRead ((UINTN)&Dcfg->RcwSr[0]);
+ RcwSr = DcfgRead32 ((UINTN)&Dcfg->RcwSr[0]);
ReturnValue = BaseClock * SYS_PLL_RAT (RcwSr);
break;
default:
@@ -79,12 +71,7 @@ SocInit (
VOID
)
{
- SmmuInit ();
-
- //
- // Early init serial Port to get board information.
- //
- SerialPortInitialize ();
+ ChassisInit ();
return;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 18/24] Silicon/NXP/LS1043A: Move SocLib to Soc Package
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (16 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 17/24] Silicon/NXP/LS1043A: Use ChassisLib from Chassis2 Pkg Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 19/24] NXP/LS1043aRdbPkg/ArmPlatformLib: Remove extern SocInit Pankaj Bansal
` (6 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The SocLib contains code specific to an Soc. it should be part of
SOC package.
Therefore, move the SocLib to Soc Package.
Since we are moving the files to Soc Package, no need to mention the
Soc name in file names. Their location is enough to indicate for which
Soc the files are.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/NXP/LS1043A/LS1043A.dsc.inc | 2 +-
Silicon/NXP/{Library/SocLib/LS1043aSocLib.inf => LS1043A/Library/SocLib/SocLib.inf} | 2 +-
Silicon/NXP/{Library/SocLib/Chassis2/Soc.c => LS1043A/Library/SocLib/SocLib.c} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Silicon/NXP/LS1043A/LS1043A.dsc.inc b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
index ea0854f967a3..67f5ba68dcd5 100644
--- a/Silicon/NXP/LS1043A/LS1043A.dsc.inc
+++ b/Silicon/NXP/LS1043A/LS1043A.dsc.inc
@@ -10,7 +10,7 @@
!include Silicon/NXP/Chassis2/Chassis2.dsc.inc
[LibraryClasses.common]
- SocLib|Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+ SocLib|Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf
SerialPortLib|Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
################################################################################
diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf
similarity index 92%
rename from Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
rename to Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf
index 1d042bbfc4e4..3d0f988e1c67 100644
--- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
+++ b/Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf
@@ -24,4 +24,4 @@
DebugLib
[Sources.common]
- Chassis2/Soc.c
+ SocLib.c
diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/LS1043A/Library/SocLib/SocLib.c
similarity index 100%
rename from Silicon/NXP/Library/SocLib/Chassis2/Soc.c
rename to Silicon/NXP/LS1043A/Library/SocLib/SocLib.c
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 19/24] NXP/LS1043aRdbPkg/ArmPlatformLib: Remove extern SocInit
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (17 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 18/24] Silicon/NXP/LS1043A: Move SocLib to Soc Package Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 20/24] NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg Pankaj Bansal
` (5 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
SocInit can be defined in SocLib.h
No need to make it extern in ArmPlatformLib
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- Moved commit three commits before in series
Silicon/NXP/Include/Library/SocLib.h | 8 ++++++++
Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c | 2 --
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/Silicon/NXP/Include/Library/SocLib.h b/Silicon/NXP/Include/Library/SocLib.h
index 749aa230dec5..0ca68602618d 100644
--- a/Silicon/NXP/Include/Library/SocLib.h
+++ b/Silicon/NXP/Include/Library/SocLib.h
@@ -41,4 +41,12 @@ SocGetClock (
IN VA_LIST Args
);
+/**
+ Function to initialize SoC specific constructs
+ **/
+VOID
+SocInit (
+ VOID
+ );
+
#endif // SOC_LIB_H__
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
index 7f5872a78cfc..a554d1377484 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
@@ -16,8 +16,6 @@
#include <Ppi/ArmMpCoreInfo.h>
#include <Ppi/NxpPlatformGetClock.h>
-extern VOID SocInit (VOID);
-
/**
Get the clocks supplied by Platform(Board) to NXP Layerscape SOC IPs
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 20/24] NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (18 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 19/24] NXP/LS1043aRdbPkg/ArmPlatformLib: Remove extern SocInit Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 10:28 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg Pankaj Bansal
` (4 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
ArmPlatformHelper.S is being replaced by the ArmPlatformPkg version at
commit hash f4dfad05dda2c7b29e8105605621f2b413f0af2b.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- Modify commit description
Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf | 2 +
Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c | 8 ---
Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S | 60 ++++++++++++--------
3 files changed, 39 insertions(+), 31 deletions(-)
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
index 07ca6b34445f..1faf99b99c54 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
@@ -37,3 +37,5 @@
[FixedPcd]
gArmTokenSpaceGuid.PcdArmPrimaryCore
+ gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
+
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
index a554d1377484..dc81e7ba3101 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
@@ -137,11 +137,3 @@ ArmPlatformGetPlatformPpiList (
*PpiList = gPlatformPpiTable;
}
-
-UINTN
-ArmPlatformGetCorePosition (
- IN UINTN MpId
- )
-{
- return 1;
-}
diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
index dfbf73675a2d..b7c6dbdc2e61 100644
--- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
+++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
@@ -1,31 +1,45 @@
-# @file
-#
-# Copyright (c) 2012-2013, ARM Limited. All rights reserved.
-# Copyright 2017, 2020 NXP
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
+//
+// Copyright (c) 2012-2013, ARM Limited. All rights reserved.
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+//
#include <AsmMacroIoLibV8.h>
-#include <AutoGen.h>
-
-.text
-.align 2
-
-GCC_ASM_IMPORT(ArmReadMpidr)
-
-ASM_FUNC(ArmPlatformIsPrimaryCore)
- tst x0, #3
- cset x0, eq
- ret
+#include <Library/ArmLib.h>
ASM_FUNC(ArmPlatformPeiBootAction)
-EL1_OR_EL2(x0)
-1:
-2:
ret
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+// With this function: CorePos = (ClusterId * 4) + CoreId
+ASM_FUNC(ArmPlatformGetCorePosition)
+ and x1, x0, #ARM_CORE_MASK
+ and x0, x0, #ARM_CLUSTER_MASK
+ add x0, x1, x0, LSR #6
+ ret
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
- MOV32 (x0, FixedPcdGet32(PcdArmPrimaryCore))
- ldrh w0, [x0]
+ MOV32 (w0, FixedPcdGet32 (PcdArmPrimaryCore))
+ ret
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformIsPrimaryCore)
+ MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCoreMask))
+ and x0, x0, x1
+ MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCore))
+ cmp w0, w1
+ mov x0, #1
+ mov x1, #0
+ csel x0, x0, x1, eq
ret
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (19 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 20/24] NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 10:31 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 22/24] Platform/NXP/LS1043aRdbPkg: Add VarStore Pankaj Bansal
` (3 subsequent siblings)
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
FVRules.fdf.inc is being replaced by the ArmVirtPkg/ArmVirtRules.fdf.inc
at commit hash 746c5b6238f1ee55deb4b3ec32a6d732e27eeeaa
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- Modify commit description
Platform/NXP/FVRules.fdf.inc | 59 +++++++++++++-------
1 file changed, 38 insertions(+), 21 deletions(-)
diff --git a/Platform/NXP/FVRules.fdf.inc b/Platform/NXP/FVRules.fdf.inc
index c9fba65dae85..63de26abe056 100644
--- a/Platform/NXP/FVRules.fdf.inc
+++ b/Platform/NXP/FVRules.fdf.inc
@@ -1,8 +1,7 @@
-# FvRules.fdf.inc
#
-# Rules for creating FD.
-#
-# Copyright 2017-2019 NXP
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -16,40 +15,49 @@
#
################################################################################
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
[Rule.Common.SEC]
- FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
- TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
- FILE PEI_CORE = $(NAMED_GUID) {
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
+ FILE PEI_CORE = $(NAMED_GUID) FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
- FILE PEIM = $(NAMED_GUID) {
+ FILE PEIM = $(NAMED_GUID) FIXED {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
-[Rule.Common.PEIM.TIANOCOMPRESSED]
- FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
- }
-
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
-
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
@@ -62,6 +70,8 @@
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
+ RAW ACPI Optional |.acpi
+ RAW ASL Optional |.aml
}
[Rule.Common.DXE_RUNTIME_DRIVER]
@@ -73,7 +83,7 @@
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
- UI STRING ="$(MODULE_NAME)" Optional
+ UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
@@ -91,3 +101,10 @@
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW ACPI |.acpi
+ RAW ASL |.aml
+ UI STRING="$(MODULE_NAME)" Optional
+ }
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 22/24] Platform/NXP/LS1043aRdbPkg: Add VarStore
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (20 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 23/24] Silicon/NXP: move MemoryInitPeiLib as per PEIM structures Pankaj Bansal
` (2 subsequent siblings)
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Add VarStore Fd. This Fd is used to store non volatile variables in
flash.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf | 3 +-
Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc | 91 ++++++++++++++++++++
2 files changed, 93 insertions(+), 1 deletion(-)
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
index 8d66f36d7407..99fbc87e1200 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
@@ -3,7 +3,7 @@
# FLASH layout file for LS1043a board.
#
# Copyright (c) 2016, Freescale Ltd. All rights reserved.
-# Copyright 2017-2019 NXP
+# Copyright 2017-2020 NXP
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -49,6 +49,7 @@ gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
!include Platform/NXP/FVRules.fdf.inc
+!include VarStore.fdf.inc
################################################################################
#
# FV Section
diff --git a/Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc b/Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc
new file mode 100644
index 000000000000..391e4ae5eaf8
--- /dev/null
+++ b/Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc
@@ -0,0 +1,91 @@
+## @file
+# FDF include file with FD definition that defines an empty variable store.
+#
+# Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.
+# Copyright (C) 2014, Red Hat, Inc.
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+# Copyright (c) 2016, Freescale Semiconductor. All rights reserved.
+# Copyright 2017-2020 NXP
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[FD.LS1043aRdbNv_EFI]
+BaseAddress = 0x60500000 #The base address of the FLASH device
+Size = 0x000C0000 #The size in bytes of the FLASH device
+ErasePolarity = 1
+BlockSize = 0x40000
+NumBlocks = 0x3
+
+#
+# Place NV Storage just above Platform Data Base
+#
+DEFINE NVRAM_AREA_VARIABLE_BASE = 0x00000000
+DEFINE NVRAM_AREA_VARIABLE_SIZE = 0x00040000
+DEFINE FTW_WORKING_BASE = $(NVRAM_AREA_VARIABLE_BASE) + $(NVRAM_AREA_VARIABLE_SIZE)
+DEFINE FTW_WORKING_SIZE = 0x00040000
+DEFINE FTW_SPARE_BASE = $(FTW_WORKING_BASE) + $(FTW_WORKING_SIZE)
+DEFINE FTW_SPARE_SIZE = 0x00040000
+
+#############################################################################
+# LS1043ARDB NVRAM Area
+# LS1043ARDB NVRAM Area contains: Variable + FTW Working + FTW Spare
+#############################################################################
+
+
+$(NVRAM_AREA_VARIABLE_BASE)|$(NVRAM_AREA_VARIABLE_SIZE)
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+#NV_VARIABLE_STORE
+DATA = {
+ ## This is the EFI_FIRMWARE_VOLUME_HEADER
+ # ZeroVector []
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # FileSystemGuid: gEfiSystemNvDataFvGuid =
+ # { 0xFFF12B8D, 0x7696, 0x4C8B,
+ # { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
+ # FvLength: 0xC0000
+ 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # Signature "_FVH" # Attributes
+ 0x5f, 0x46, 0x56, 0x48, 0x36, 0x0E, 0x00, 0x00,
+ # HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision
+ 0x48, 0x00, 0xC2, 0xF9, 0x00, 0x00, 0x00, 0x02,
+ # Blockmap[0]: 0x3 Blocks * 0x40000 Bytes / Block
+ 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+ # Blockmap[1]: End
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ ## This is the VARIABLE_STORE_HEADER
+ # It is compatible with SECURE_BOOT_ENABLE == FALSE as well.
+ # Signature: gEfiVariableGuid =
+ # { 0xddcf3616, 0x3275, 0x4164,
+ # { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
+ 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
+ 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
+ # Size: 0x40000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
+ # 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x3ffb8
+ # This can speed up the Variable Dispatch a bit.
+ 0xB8, 0xFF, 0x03, 0x00,
+ # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
+ 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+$(FTW_WORKING_BASE)|$(FTW_WORKING_SIZE)
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+#NV_FTW_WORKING
+DATA = {
+ # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
+ # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
+ 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
+ 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
+ # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
+ 0x5b, 0xe7, 0xc6, 0x86, 0xFE, 0xFF, 0xFF, 0xFF,
+ # WriteQueueSize: UINT64
+ 0xE0, 0xFF, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+$(FTW_SPARE_BASE)|$(FTW_SPARE_SIZE)
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+#NV_FTW_SPARE
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 23/24] Silicon/NXP: move MemoryInitPeiLib as per PEIM structures
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (21 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 22/24] Platform/NXP/LS1043aRdbPkg: Add VarStore Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 24/24] Platform/NXP/LS1043aRdbPkg: Add PEI Phase Pankaj Bansal
2020-04-22 10:46 ` [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Leif Lindholm
24 siblings, 0 replies; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
MemoryInitPeiLib would be linked to MemoryInitPeim, when we implement
PEI phase. therefore, move the library to directory of same name.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
- No change
Silicon/NXP/NxpQoriqLs.dsc.inc | 4 ++--
Silicon/NXP/Library/{MemoryInitPei => MemoryInitPeiLib}/MemoryInitPeiLib.inf | 0
Silicon/NXP/Library/{MemoryInitPei => MemoryInitPeiLib}/MemoryInitPeiLib.h | 0
Silicon/NXP/Library/{MemoryInitPei => MemoryInitPeiLib}/MemoryInitPeiLib.c | 0
4 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dsc.inc b/Silicon/NXP/NxpQoriqLs.dsc.inc
index 8fbd6288cfae..3c8b11d9e04c 100644
--- a/Silicon/NXP/NxpQoriqLs.dsc.inc
+++ b/Silicon/NXP/NxpQoriqLs.dsc.inc
@@ -98,6 +98,8 @@
ResetSystemLib|ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
IoAccessLib|Silicon/NXP/Library/IoAccessLib/IoAccessLib.inf
+ MemoryInitPeiLib|Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
+
[LibraryClasses.common.SEC]
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
@@ -109,7 +111,6 @@
MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
- MemoryInitPeiLib|Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
# 1/123 faster than Stm or Vstm version
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
@@ -139,7 +140,6 @@
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
- MemoryInitPeiLib|Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
[LibraryClasses.common.UEFI_APPLICATION]
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
similarity index 100%
rename from Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
rename to Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.h
similarity index 100%
rename from Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h
rename to Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.h
diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
similarity index 100%
rename from Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
rename to Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* [PATCH edk2-platforms v3 24/24] Platform/NXP/LS1043aRdbPkg: Add PEI Phase
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (22 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 23/24] Silicon/NXP: move MemoryInitPeiLib as per PEIM structures Pankaj Bansal
@ 2020-04-15 12:13 ` Pankaj Bansal
2020-04-23 10:33 ` Leif Lindholm
2020-04-22 10:46 ` [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Leif Lindholm
24 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-15 12:13 UTC (permalink / raw)
To: Leif Lindholm, Meenakshi Aggarwal, Michael D Kinney, devel,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Add PEI phase to LS1043aRdb. This is needed becuase we need to have
dynamic PCDs support to be able to reserve memory before reporting
memory to UEFI fimrware.
Using PEI phase we are now also dynamically setting the
PcdSystemMemoryBase and PcdSystemMemorySize depending upon the DRAM
regions detected.
This in turn would depend on the DDR DIMMs installed on board.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
- Update commit description
Silicon/NXP/NxpQoriqLs.dsc.inc | 61 +++++++++++++-----
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 9 ---
Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf | 18 ++++--
Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf | 3 +-
Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c | 67 +++++++++++---------
5 files changed, 98 insertions(+), 60 deletions(-)
diff --git a/Silicon/NXP/NxpQoriqLs.dsc.inc b/Silicon/NXP/NxpQoriqLs.dsc.inc
index 3c8b11d9e04c..14fbea72d3f8 100644
--- a/Silicon/NXP/NxpQoriqLs.dsc.inc
+++ b/Silicon/NXP/NxpQoriqLs.dsc.inc
@@ -93,30 +93,35 @@
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
I2cLib|Silicon/NXP/Library/I2cLib/I2cLib.inf
ResetSystemLib|ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
IoAccessLib|Silicon/NXP/Library/IoAccessLib/IoAccessLib.inf
+ PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
MemoryInitPeiLib|Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
[LibraryClasses.common.SEC]
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
- UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
- ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
- LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
- PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
- HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
- PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
- MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+
+[LibraryClasses.common.PEI_CORE]
+ PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
- PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
- # 1/123 faster than Stm or Vstm version
- BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
-
- # Uncomment to turn on GDB stub in SEC.
- #DebugAgentLib|EmbeddedPkg/Library/GdbDebugAgent/GdbDebugAgent.inf
+ PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
[LibraryClasses.common.PEIM]
PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
@@ -125,14 +130,16 @@
PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
[LibraryClasses.common.DXE_CORE]
HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
- UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
@@ -204,6 +211,9 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0
+
[PcdsDynamicHii.common.DEFAULT]
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|10
@@ -224,6 +234,12 @@
gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
+ ## Base of DRAM
+ ## since TFA puts Fd at 0x2000000 offset from DRAM base, we can use this space
+ ## for temporary ram
+ gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x80000000
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
+
!if $(TARGET) == RELEASE
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x27
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x81000001
@@ -281,13 +297,26 @@
################################################################################
[Components.common]
#
- # SEC
+ # PEI Phase modules
#
- ArmPlatformPkg/PrePi/PeiUniCore.inf
+ ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+
+ MdeModulePkg/Core/Pei/PeiMain.inf
MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
<LibraryClasses>
PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
}
+ MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
+ MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+
+ ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+ ArmPkg/Drivers/CpuPei/CpuPei.inf
+ ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+
+ MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ }
#
# DXE
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
index d486c9b36fab..d45fd67c03b5 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
@@ -30,15 +30,6 @@
RealTimeClockLib|Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
[PcdsFixedAtBuild.common]
-
- #
- # LS1043a board Specific PCDs
- # XX (DRAM - Region 1 2GB)
- # (NOR - IFC Region 1 512MB)
- gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000
- gArmTokenSpaceGuid.PcdSystemMemorySize|0x7BE00000
- gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
-
#
# RTC Pcds
#
diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
index 99fbc87e1200..931d0bb14f9b 100644
--- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
+++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
@@ -24,10 +24,10 @@
[FD.LS1043ARDB_EFI]
BaseAddress = 0x82000000|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device.
-Size = 0x000ED000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device
+Size = 0x00140000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device
ErasePolarity = 1
-BlockSize = 0x1
-NumBlocks = 0xED000
+BlockSize = 0x40000
+NumBlocks = 0x5
################################################################################
#
@@ -44,7 +44,7 @@ NumBlocks = 0xED000
# RegionType <FV, DATA, or FILE>
#
################################################################################
-0x00000000|0x000ED000
+0x00000000|0x00140000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
@@ -159,7 +159,15 @@ READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
- INF ArmPlatformPkg/PrePi/PeiUniCore.inf
+ INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+ INF MdeModulePkg/Core/Pei/PeiMain.inf
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
+ INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
+ INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+ INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+ INF ArmPkg/Drivers/CpuPei/CpuPei.inf
+ INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+ INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
diff --git a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
index ad2371115b17..a33f8cd3f743 100644
--- a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
+++ b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
@@ -13,7 +13,8 @@
FILE_GUID = 55ddb6e0-70b5-11e0-b33e-0002a5d5c51b
MODULE_TYPE = BASE
VERSION_STRING = 1.0
- LIBRARY_CLASS = MemoryInitPeiLib|SEC PEIM DXE_DRIVER
+ LIBRARY_CLASS = MemoryInitPeiLib|PEIM
+ CONSTRUCTOR = MemoryInitPeiLibConstructor
[Sources]
MemoryInitPeiLib.c
diff --git a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
index ea3e7d59532e..932bdf948f6f 100644
--- a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
+++ b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
@@ -111,22 +111,17 @@ GetDramRegionsInfo (
/**
Get the installed RAM information.
- Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
+ Initialize Memory HOBs (Resource Descriptor HOBs)
+ Set the PcdSystemMemoryBase and PcdSystemMemorySize.
- @param[in] UefiMemoryBase Base address of region used by UEFI in
- permanent memory
- @param[in] UefiMemorySize Size of the region used by UEFI in permanent memory
-
- @return EFI_SUCCESS Successfuly Initialize MMU and Memory HOBs.
+ @return EFI_SUCCESS Successfuly retrieved the system memory information
**/
EFI_STATUS
EFIAPI
-MemoryPeim (
- IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
- IN UINT64 UefiMemorySize
+MemoryInitPeiLibConstructor (
+ VOID
)
{
- ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
INT32 Index;
UINTN BaseAddress;
UINTN Size;
@@ -137,18 +132,6 @@ MemoryPeim (
UINTN FdTop;
BOOLEAN FoundSystemMem;
- // Get Virtual Memory Map from the Platform Library
- ArmPlatformGetVirtualMemoryMap (&MemoryTable);
-
- //
- // Ensure MemoryTable[0].Length which is size of DRAM has been set
- // by ArmPlatformGetVirtualMemoryMap ()
- //
- ASSERT (MemoryTable[0].Length != 0);
-
- //
- // Now, the permanent memory has been installed, we can call AllocatePages()
- //
ResourceAttributes = (
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
@@ -163,8 +146,8 @@ MemoryPeim (
GetDramRegionsInfo (DramRegions, ARRAY_SIZE (DramRegions));
- FdBase = (UINTN)FixedPcdGet64 (PcdFdBaseAddress);
- FdTop = FdBase + (UINTN)FixedPcdGet32 (PcdFdSize);
+ FdBase = (UINTN)PcdGet64 (PcdFdBaseAddress);
+ FdTop = FdBase + (UINTN)PcdGet32 (PcdFdSize);
// Declare memory regios to system
// The DRAM region info is sorted based on the RAM address is SOC memory map.
@@ -217,8 +200,8 @@ MemoryPeim (
);
};
// Mark the memory covering the Firmware Device as boot services data
- BuildMemoryAllocationHob (FixedPcdGet64 (PcdFdBaseAddress),
- FixedPcdGet32 (PcdFdSize),
+ BuildMemoryAllocationHob (PcdGet64 (PcdFdBaseAddress),
+ PcdGet32 (PcdFdSize),
EfiBootServicesData);
} else {
BuildResourceDescriptorHob (
@@ -236,17 +219,43 @@ MemoryPeim (
Size = DramRegions[Index].Size;
if (FdBase >= BaseAddress && FdTop <= Top) {
- Size -= (UINTN)FixedPcdGet32 (PcdFdSize);
+ Size -= (UINTN)PcdGet32 (PcdFdSize);
}
- if ((UefiMemoryBase >= BaseAddress) && (Size >= UefiMemorySize)) {
+ if (Size >= FixedPcdGet32 (PcdSystemMemoryUefiRegionSize)) {
FoundSystemMem = TRUE;
+ PcdSet64S (PcdSystemMemoryBase, BaseAddress);
+ PcdSet64S (PcdSystemMemorySize, Size);
}
}
ASSERT (FoundSystemMem == TRUE);
- // Build Memory Allocation Hob
+ return EFI_SUCCESS;
+}
+
+/**
+ Initialize MMU
+
+ @param[in] UefiMemoryBase Base address of region used by UEFI in
+ permanent memory
+ @param[in] UefiMemorySize Size of the region used by UEFI in permanent memory
+
+ @return EFI_SUCCESS Successfuly Initialize MMU
+**/
+EFI_STATUS
+EFIAPI
+MemoryPeim (
+ IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
+ IN UINT64 UefiMemorySize
+ )
+{
+ ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
+
+ // Get Virtual Memory Map from the Platform Library
+ ArmPlatformGetVirtualMemoryMap (&MemoryTable);
+
+ // Initialize Mmu
InitMmu (MemoryTable);
if (FeaturePcdGet (PcdPrePiProduceMemoryTypeInformationHob)) {
--
2.17.1
^ permalink raw reply related [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
` (23 preceding siblings ...)
2020-04-15 12:13 ` [PATCH edk2-platforms v3 24/24] Platform/NXP/LS1043aRdbPkg: Add PEI Phase Pankaj Bansal
@ 2020-04-22 10:46 ` Leif Lindholm
24 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-22 10:46 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
Hi Pankaj,
When importing these patches, I get a number of git warnings:
0001-Silicon-NXP-Add-I2c-lib.patch
Applying: Silicon/NXP: Add I2c lib
.git/rebase-apply/patch:733: new blank line at EOF.
+
.git/rebase-apply/patch:770: new blank line at EOF.
+
.git/rebase-apply/patch:881: new blank line at EOF.
+
.git/rebase-apply/patch:912: new blank line at EOF.
+
warning: 4 lines add whitespace errors.
0012-Silicon-NXP-Move-RAM-retrieval-from-SocLib.patch
Applying: Silicon/NXP: Move RAM retrieval from SocLib
.git/rebase-apply/patch:337: new blank line at EOF.
+
warning: 1 line adds whitespace errors.
0013-Platform-NXP-LS1043aRdbPkg-Add-Clock-retrieval-APIs.patch
Applying: Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs
.git/rebase-apply/patch:193: new blank line at EOF.
+
warning: 1 line adds whitespace errors.
0016-Silicon-NXP-Add-Chassis2-Package.patch
Applying: Silicon/NXP: Add Chassis2 Package
.git/rebase-apply/patch:45: new blank line at EOF.
+
.git/rebase-apply/patch:244: new blank line at EOF.
+
warning: 2 lines add whitespace errors.
0020-NXP-LS1043aRdbPkg-Use-ArmPlatformHelper.S-from-ArmPl.patch
Applying: NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from
ArmPlatformPkg
.git/rebase-apply/patch:105: new blank line at EOF.
+
warning: 1 line adds whitespace errors.
These are trivial and I can fix them up here for any patches that are
ready to push, but if there is a v4, can you check and update?
Verify by importing the patches to a clean branch using git am of the
patches you would send to the list.
(Note to self - we really should add a test for this to PatchCheck.py,
I've raised https://bugzilla.tianocore.org/show_bug.cgi?id=2685 to
covert this.)
Regards,
Leif
On Wed, Apr 15, 2020 at 17:43:18 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> This patch series adds PEI phase to NXP LS1043ARDB Platform.
> V2 series can be referred here:
> https://edk2.groups.io/g/devel/message/56009
>
> I have taken care of the review comments received on v2 and have
> removed/added these commits w.r.t V2:
>
> Removed in V3 (present in V2):
> 07/28 Silicon/NXP: Implement SerialUartClockLib
> 08/28 Silicon/NXP/LS1043A: Use BaseSerialPortLib16550 as SerialPortLib
> 09/28 Silicon/NXP: Drop DUartPortLib
>
> These commits have been dropped for now. the discussion in ongoing for
> using BaseSerialPortLib16550 @ https://edk2.groups.io/g/devel/message/54629
> Once that discussion is concluded, i can submit these patches.
>
> 21/28 Slicon/NXP: Add PlatformPei Lib
>
> as per discussion on https://edk2.groups.io/g/devel/message/56015
> i am dropping this commit for now. when i submit the patches to print more
> info about SOC, i can submit this patch with those.
>
> 23/28 NXP/LS1043aRdbPkg/ArmPlatformLib: Use Allocate pool
>
> discussion ongoing @ https://edk2.groups.io/g/devel/message/56019
> Once that discussion is concluded, i can submit this patch.
>
> Added in V3 (not present in V2)
> 15/24 Silicon: NXP: Remove direct calls to SwapMmio* APIs
>
> Added as per comments @ https://edk2.groups.io/g/devel/message/56012
>
> Pankaj Bansal (24):
> Silicon/NXP: Add I2c lib
> Silicon/NXP: changes to use I2clib in i2cdxe
> Silicon/NXP/I2cDxe: Fix I2c Timeout with RTC
> Silicon/Maxim: Fix bug in RtcWrite in Ds1307RtcLib
> Silicon/Maxim: Add comments in Ds1307RtcLib
> NXP/LS1043aRdb: Move Soc specific components to soc files
> Silicon/NXP: remove print information from Soc lib
> Silicon/NXP: remove not needed components
> Silicon/NXP: Remove unnecessary PCDs
> Silicon/NXP: Move dsc file
> Platform/NXP: rename the ArmPlatformLib as per ArmPlatformPkg
> Silicon/NXP: Move RAM retrieval from SocLib
> Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs
> Silicon/NXP: Use Clock retrieval PPI in modules
> Silicon: NXP: Remove direct calls to SwapMmio* APIs
> Silicon/NXP: Add Chassis2 Package
> Silicon/NXP/LS1043A: Use ChassisLib from Chassis2 Pkg
> Silicon/NXP/LS1043A: Move SocLib to Soc Package
> NXP/LS1043aRdbPkg/ArmPlatformLib: Remove extern SocInit
> NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg
> Platform/NXP: Use FV rules from ArmVirtPkg
> Platform/NXP/LS1043aRdbPkg: Add VarStore
> Silicon/NXP: move MemoryInitPeiLib as per PEIM structures
> Platform/NXP/LS1043aRdbPkg: Add PEI Phase
>
> Silicon/NXP/Chassis2/Chassis2.dec | 23 +
> Silicon/NXP/NxpQoriqLs.dec | 95 +--
> Silicon/NXP/Chassis2/Chassis2.dsc.inc | 10 +
> Silicon/NXP/LS1043A/LS1043A.dsc.inc | 48 +-
> {Platform => Silicon}/NXP/NxpQoriqLs.dsc.inc | 71 ++-
> Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 26 +-
> Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf | 21 +-
> .../Drivers/PlatformDxe/PlatformDxe.inf | 11 +-
> .../Library/ArmPlatformLib/ArmPlatformLib.inf | 41 ++
> .../Library/PlatformLib/ArmPlatformLib.inf | 55 --
> .../Library/ChassisLib/ChassisLib.inf | 34 +
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 14 +-
> Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf | 27 +
> .../NXP/Library/DUartPortLib/DUartPortLib.inf | 5 +-
> Silicon/NXP/Library/I2cLib/I2cLib.inf | 31 +
> .../MemoryInitPeiLib.inf | 10 +-
> Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 45 --
> Silicon/NXP/Chassis2/Include/Chassis.h | 34 +
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.h | 50 +-
> Silicon/NXP/Include/Chassis2/LsSerDes.h | 62 --
> Silicon/NXP/Include/Chassis2/NxpSoc.h | 361 -----------
> Silicon/NXP/Include/DramInfo.h | 38 --
> Silicon/NXP/Include/Library/ChassisLib.h | 51 ++
> Silicon/NXP/Include/Library/I2cLib.h | 120 ++++
> Silicon/NXP/Include/Library/IoAccessLib.h | 236 +------
> Silicon/NXP/Include/Library/SocLib.h | 52 ++
> Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h | 53 ++
> Silicon/NXP/LS1043A/Include/Soc.h | 55 ++
> Silicon/NXP/LS1043A/Include/SocSerDes.h | 51 --
> Silicon/NXP/Library/DUartPortLib/DUart.h | 8 +-
> Silicon/NXP/Library/I2cLib/I2cLibInternal.h | 105 ++++
> .../MemoryInitPeiLib/MemoryInitPeiLib.h | 25 +
> Silicon/NXP/Library/SocLib/NxpChassis.h | 136 ----
> .../Drivers/PlatformDxe/PlatformDxe.c | 15 +-
> .../ArmPlatformLib.c | 61 +-
> .../ArmPlatformLibMem.c} | 79 ++-
> .../Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c | 23 +-
> .../Chassis2/Library/ChassisLib/ChassisLib.c | 97 +++
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 533 +---------------
> Silicon/NXP/LS1043A/Library/SocLib/SocLib.c | 77 +++
> .../NXP/Library/DUartPortLib/DUartPortLib.c | 7 +-
> Silicon/NXP/Library/I2cLib/I2cLib.c | 589 ++++++++++++++++++
> Silicon/NXP/Library/IoAccessLib/IoAccessLib.c | 17 +-
> .../Library/MemoryInitPei/MemoryInitPeiLib.c | 140 -----
> .../MemoryInitPeiLib/MemoryInitPeiLib.c | 267 ++++++++
> Silicon/NXP/Library/SocLib/Chassis.c | 495 ---------------
> Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 162 -----
> Silicon/NXP/Library/SocLib/SerDes.c | 268 --------
> Platform/NXP/FVRules.fdf.inc | 59 +-
> .../AArch64/ArmPlatformHelper.S | 45 ++
> .../Library/PlatformLib/NxpQoriqLsHelper.S | 31 -
> Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc | 91 +++
> 52 files changed, 2131 insertions(+), 2929 deletions(-)
> create mode 100644 Silicon/NXP/Chassis2/Chassis2.dec
> create mode 100644 Silicon/NXP/Chassis2/Chassis2.dsc.inc
> rename {Platform => Silicon}/NXP/NxpQoriqLs.dsc.inc (85%)
> create mode 100644 Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
> delete mode 100644 Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/ArmPlatformLib.inf
> create mode 100644 Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
> create mode 100644 Silicon/NXP/LS1043A/Library/SocLib/SocLib.inf
> create mode 100644 Silicon/NXP/Library/I2cLib/I2cLib.inf
> rename Silicon/NXP/Library/{MemoryInitPei => MemoryInitPeiLib}/MemoryInitPeiLib.inf (74%)
> delete mode 100644 Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> create mode 100644 Silicon/NXP/Chassis2/Include/Chassis.h
> delete mode 100644 Silicon/NXP/Include/Chassis2/LsSerDes.h
> delete mode 100644 Silicon/NXP/Include/Chassis2/NxpSoc.h
> delete mode 100644 Silicon/NXP/Include/DramInfo.h
> create mode 100644 Silicon/NXP/Include/Library/ChassisLib.h
> create mode 100644 Silicon/NXP/Include/Library/I2cLib.h
> create mode 100644 Silicon/NXP/Include/Library/SocLib.h
> create mode 100644 Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h
> create mode 100644 Silicon/NXP/LS1043A/Include/Soc.h
> delete mode 100644 Silicon/NXP/LS1043A/Include/SocSerDes.h
> create mode 100644 Silicon/NXP/Library/I2cLib/I2cLibInternal.h
> create mode 100644 Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.h
> delete mode 100644 Silicon/NXP/Library/SocLib/NxpChassis.h
> rename Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib => ArmPlatformLib}/ArmPlatformLib.c (51%)
> rename Platform/NXP/LS1043aRdbPkg/Library/{PlatformLib/NxpQoriqLsMem.c => ArmPlatformLib/ArmPlatformLibMem.c} (54%)
> create mode 100644 Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c
> create mode 100644 Silicon/NXP/LS1043A/Library/SocLib/SocLib.c
> create mode 100644 Silicon/NXP/Library/I2cLib/I2cLib.c
> delete mode 100644 Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
> create mode 100644 Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
> delete mode 100644 Silicon/NXP/Library/SocLib/Chassis.c
> delete mode 100644 Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> delete mode 100644 Silicon/NXP/Library/SocLib/SerDes.c
> create mode 100644 Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
> delete mode 100644 Platform/NXP/LS1043aRdbPkg/Library/PlatformLib/NxpQoriqLsHelper.S
> create mode 100644 Platform/NXP/LS1043aRdbPkg/VarStore.fdf.inc
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib
2020-04-15 12:13 ` [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib Pankaj Bansal
@ 2020-04-22 16:38 ` Leif Lindholm
2020-04-24 6:53 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-22 16:38 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:19 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> I2c lib is going to be used in PrePeiCore sec module to get the
> System clock information from devices connected to i2c (like fpga
> or clock generator)
>
> since we don't have support of DXE modules this early in boot stage,
> move the i2c controller functionality in library.
>
> This I2cLib is not bug fix over I2cDxe.
> The I2cLib has been completely re-written and not code movement from
> I2cDxe to I2cLib
3 lines above this, the commit message says it *is* being moved.
> This is because I2cDxe has been written assuming that the I2c transaction
> would always be of minimum two operations.
> But this may not be the case always. e.g. RTC write in PCF2129 is single
> operation.
> Also the I2cDxe driver doesn't generate repeat start if i2c transaction is
> more than two operations, it generates stop. This violates PI I2C spec.
>
> Now we have removed these assumptions as well as added repeat start
> between successive operations, which comply with PI I2C spec.
I'm not asking for a technical debate in the commit message.
Please throw away all text in this message and write a new one from
scratch describing what this patch *does*.
Then please submit a v4 of this patch only.
Please also address the blank lines at EOF pointed out below.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - moved I2cLib addition in NxpQoriqLs.dsc.inc to PATCH 2
> - Added Qoriq Layerscape in description of CLOCK_DIVISOR_PAIR
> - ERRXXXXXX -> A-XXXXXX
> - Added u-boot patch reference to errata workaround description
> - Added Glossary and Revision Reference in file header
> - Dividor -> divider
Several remain.
> - Added explaination before calling I2cErratumA009203
> - PtrAddress -> AddressPtr
> - Update commit description
(These are useful, please keep in v4.)
>
> Silicon/NXP/NxpQoriqLs.dec | 10 +-
> Silicon/NXP/Library/I2cLib/I2cLib.inf | 31 ++
> Silicon/NXP/Include/Library/I2cLib.h | 120 ++++
> Silicon/NXP/Library/I2cLib/I2cLibInternal.h | 105 ++++
> Silicon/NXP/Library/I2cLib/I2cLib.c | 589 ++++++++++++++++++++
> 5 files changed, 854 insertions(+), 1 deletion(-)
>
> diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
> index 764b9bb0e2d3..4a1cfb3e278e 100644
> --- a/Silicon/NXP/NxpQoriqLs.dec
> +++ b/Silicon/NXP/NxpQoriqLs.dec
> @@ -1,6 +1,6 @@
> # @file.
> #
> -# Copyright 2017-2019 NXP
> +# Copyright 2017-2020 NXP
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -13,6 +13,10 @@
> [Includes]
> Include
>
> +[LibraryClasses]
> + ## @libraryclass Provides services to read/write to I2c devices
> + I2cLib|Include/Library/I2cLib.h
> +
> [Guids.common]
> gNxpQoriqLsTokenSpaceGuid = {0x98657342, 0x4aee, 0x4fc6, {0xbc, 0xb5, 0xff, 0x45, 0xb7, 0xa8, 0x71, 0xf2}}
> gNxpNonDiscoverableI2cMasterGuid = { 0x5f2c099c, 0x54a3, 0x4dd4, {0x9e, 0xc5, 0xe9, 0x12, 0x8c, 0x36, 0x81, 0x6a}}
> @@ -101,3 +105,7 @@
> gNxpQoriqLsTokenSpaceGuid.PcdPciLutBigEndian|FALSE|BOOLEAN|0x00000312
> gNxpQoriqLsTokenSpaceGuid.PcdWatchdogBigEndian|FALSE|BOOLEAN|0x00000313
> gNxpQoriqLsTokenSpaceGuid.PcdIfcBigEndian|FALSE|BOOLEAN|0x00000314
> +
> +[PcdsFeatureFlag]
> + gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203|FALSE|BOOLEAN|0x00000315
> +
Blank line at EOF.
> diff --git a/Silicon/NXP/Library/I2cLib/I2cLib.inf b/Silicon/NXP/Library/I2cLib/I2cLib.inf
> new file mode 100644
> index 000000000000..b9bd79ac1ef1
> --- /dev/null
> +++ b/Silicon/NXP/Library/I2cLib/I2cLib.inf
> @@ -0,0 +1,31 @@
> +# @file
> +#
> +# Component description file for I2cLib module
> +# Copyright 2017, 2020 NXP
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = I2cLib
> + FILE_GUID = 8ecefc8f-a2c4-4091-b81f-20f7aeb0567f
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = I2cLib
> +
> +[Sources.common]
> + I2cLib.c
> +
> +[LibraryClasses]
> + IoLib
> + TimerLib
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + Silicon/NXP/NxpQoriqLs.dec
> +
> +[FeaturePcd]
> + gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203
> +
Blank line at EOF.
> diff --git a/Silicon/NXP/Include/Library/I2cLib.h b/Silicon/NXP/Include/Library/I2cLib.h
> new file mode 100644
> index 000000000000..e39237abd3ee
> --- /dev/null
> +++ b/Silicon/NXP/Include/Library/I2cLib.h
> @@ -0,0 +1,120 @@
> +/** @file
> + I2c Lib to control I2c controller.
> +
> + Copyright 2020 NXP
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef I2C_LIB_H__
> +#define I2C_LIB_H__
> +
> +#include <Uefi.h>
> +#include <Pi/PiI2c.h>
> +
> +/**
> + software reset of the entire I2C module.
> + The module is reset and disabled.
> + Status register fields (IBSR) are cleared.
> +
> + @param[in] Base Base Address of I2c controller's registers
> +
> + @return EFI_SUCCESS successfuly reset the I2c module
> +**/
> +EFI_STATUS
> +I2cReset (
> + IN UINTN Base
> + );
> +
> +/**
> + Early init I2C for reading the sysclk from I2c slave device.
> + I2c bus clock is determined from the clock input to I2c controller.
> + The clock input to I2c controller is derived from the sysclk.
> + sysclk is determined by clock generator, which is controller by i2c.
> +
> + So, it's a chicken-egg problem to read the sysclk from clock generator.
> + To break this cycle (i.e. to read the sysclk), we setup the i2c bus clock to
> + lowest value, in the hope that it won't be out of clock generator's supported
> + i2c clock frequency. Once we have the correct sysclk, we can setup the
> + correct i2c bus clock.
> +
> + @param[in] Base Base Address of I2c controller's registers
> +
> + @return EFI_SUCCESS successfuly setup the i2c bus for reading sysclk
> +**/
> +EFI_STATUS
> +I2cEarlyInitialize (
> + IN UINTN Base
> + );
> +
> +/**
> + Configure I2c bus to operate at a given speed
> +
> + @param[in] Base Base Address of I2c controller's registers
> + @param[in] I2cBusClock Input clock to I2c controller
> + @param[in] Speed speed to be configured for I2c bus
> +
> + @return EFI_SUCCESS successfuly setup the i2c bus
> +**/
> +EFI_STATUS
> +I2cInitialize (
> + IN UINTN Base,
> + IN UINT64 I2cBusClock,
> + IN UINT64 Speed
> + );
> +
> +/**
> + Transfer data to/from I2c slave device
> +
> + @param[in] Base Base Address of I2c controller's registers
> + @param[in] SlaveAddress Slave Address from which data is to be read
> + @param[in] RequestPacket Pointer to an EFI_I2C_REQUEST_PACKET structure
> + describing the I2C transaction
> +
> + @return EFI_SUCCESS successfuly transfer the data
> + @return EFI_DEVICE_ERROR There was an error while transferring data through
> + I2c bus
> + @return EFI_NO_RESPONSE There was no Ack from i2c device
> + @return EFI_TIMEOUT I2c Bus is busy
> + @return EFI_NOT_READY I2c Bus Arbitration lost
> +**/
> +EFI_STATUS
> +I2cBusXfer (
> + IN UINTN Base,
> + IN UINT32 SlaveAddress,
> + IN EFI_I2C_REQUEST_PACKET *RequestPacket
> + );
> +
> +/**
> + Read a register from I2c slave device. This API is wrapper around I2cBusXfer
> +
> + @param[in] Base Base Address of I2c controller's registers
> + @param[in] SlaveAddress Slave Address from which register value is
> + to be read
> + @param[in] RegAddress Register Address in Slave's memory map
> + @param[in] RegAddressWidthInBytes Number of bytes in RegAddress to send to
> + I2c Slave for simple reads without any
> + register, make this value = 0
> + (RegAddress is don't care in that case)
> + @param[out] RegValue Value to be read from I2c slave's regiser
> + @param[in] RegValueNumBytes Number of bytes to read from I2c slave
> + register
> +
> + @return EFI_SUCCESS successfuly read the registers
> + @return EFI_DEVICE_ERROR There was an error while transferring data through
> + I2c bus
> + @return EFI_NO_RESPONSE There was no Ack from i2c device
> + @return EFI_TIMEOUT I2c Bus is busy
> + @return EFI_NOT_READY I2c Bus Arbitration lost
> +**/
> +EFI_STATUS
> +I2cBusReadReg (
> + IN UINTN Base,
> + IN UINT32 SlaveAddress,
> + IN UINT64 RegAddress,
> + IN UINT8 RegAddressWidthInBytes,
> + OUT UINT8 *RegValue,
> + IN UINT32 RegValueNumBytes
> + );
> +
> +#endif // I2C_LIB_H__
> diff --git a/Silicon/NXP/Library/I2cLib/I2cLibInternal.h b/Silicon/NXP/Library/I2cLib/I2cLibInternal.h
> new file mode 100644
> index 000000000000..2ca4a3639d2c
> --- /dev/null
> +++ b/Silicon/NXP/Library/I2cLib/I2cLibInternal.h
> @@ -0,0 +1,105 @@
> +/** @file
> + I2c Lib to control I2c controller.
> +
> + Copyright 2020 NXP
> + SPDX-License-Identifier: BSD-2-Clause-Patent
Add:
+
+ @par Glossary:
+ - Ibfd - I2c Bus Frequency Divider
> +**/
> +
> +#ifndef I2C_LIB_INTERNAL_H__
> +#define I2C_LIB_INTERNAL_H__
> +
> +#include <Pi/PiI2c.h>
> +#include <Uefi.h>
> +
> +/** Module Disable
> + 0b - The module is enabled. You must clear this field before any other IBCR
> + fields have any effect.
> + 1b - The module is reset and disabled. This is the power-on reset situation.
> + When high, the interface is held in reset, but registers can still be
> + accessed. Status register fields (IBSR) are not valid when the module
> + is disabled.
> +**/
> +#define I2C_IBCR_MDIS BIT7
> +// I2c Bus Interrupt Enable
> +#define I2C_IBCR_IBIE BIT6
> +/** Master / Slave Mode 0b - Slave mode 1b - Master mode
> + When you change this field from 0 to 1, the module generates a START signal
> + on the bus and selects the master mode. When you change this field from 1 to
> + 0, the module generates a STOP signal and changes the operation mode from
> + master to slave. You should generate a STOP signal only if IBSR[IBIF]=1.
> + The module clears this field without generating a STOP signal when the
> + master loses arbitration.
> +*/
> +#define I2C_IBCR_MSSL BIT5
> +// 0b - Receive 1b - Transmit
> +#define I2C_IBCR_TXRX BIT4
> +/** Data acknowledge disable
> + Values written to this field are only used when the I2C module is a receiver,
> + not a transmitter.
> + 0b - The module sends an acknowledge signal to the bus at the 9th clock bit
> + after receiving one byte of data.
> + 1b - The module does not send an acknowledge-signal response (that is,
> + acknowledge bit = 1).
> +**/
> +#define I2C_IBCR_NOACK BIT3
> +/**Repeat START
> + If the I2C module is the current bus master, and you program RSTA=1, the I2C
> + module generates a repeated START condition. This field always reads as a 0.
> + If you attempt a repeated START at the wrong time, if the bus is owned by
> + another master the result is loss of arbitration.
> +**/
> +#define I2C_IBCR_RSTA BIT2
> +// DMA enable
> +#define I2C_IBCR_DMAEN BIT1
> +
> +// Transfer Complete
> +#define I2C_IBSR_TCF BIT7
> +// I2C bus Busy. 0b - Bus is idle, 1b - Bus is busy
> +#define I2C_IBSR_IBB BIT5
> +// Arbitration Lost. software must clear this field by writing a one to it.
> +#define I2C_IBSR_IBAL BIT4
> +// I2C bus interrupt flag
> +#define I2C_IBSR_IBIF BIT1
> +// Received acknowledge 0b - Acknowledge received 1b - No acknowledge received
> +#define I2C_IBSR_RXAK BIT0
> +
> +//Bus idle interrupt enable
> +#define I2C_IBIC_BIIE BIT7
> +
> +// Glitch filter enable
> +#define I2C_IBDBG_GLFLT_EN BIT3
> +
> +#define I2C_BUS_TEST_BUSY TRUE
> +#define I2C_BUS_TEST_IDLE !I2C_BUS_TEST_BUSY
> +#define I2C_BUS_TEST_RX_ACK TRUE
> +#define I2C_BUS_NO_TEST_RX_ACK !I2C_BUS_TEST_RX_ACK
> +
> +#define ARRAY_LAST_ELEM(x) (x)[ARRAY_SIZE (x) - 1]
> +#define I2C_NUM_RETRIES 500
> +
> +typedef struct _I2C_REGS {
> + UINT8 Ibad; // I2c Bus Address Register
> + UINT8 Ibfd; // I2c Bus Frequency Dividor Register
Dividor -> Divider (global search and replace, please).
> + UINT8 Ibcr; // I2c Bus Control Register
> + UINT8 Ibsr; // I2c Bus Status Register
> + UINT8 Ibdr; // I2C Bus Data I/O Register
> + UINT8 Ibic; // I2C Bus Interrupt Config Register
> + UINT8 Ibdbg; // I2C Bus Debug Register
> +} I2C_REGS;
> +
> +/*
> + * sorted list of clock divisor, Ibfd register value pairs
> + */
> +typedef struct _I2C_CLOCK_DIVISOR_PAIR {
> + UINT16 Divisor;
> + UINT16 Ibfd; // I2c Bus Frequency Dividor Register value
> +} I2C_CLOCK_DIVISOR_PAIR;
> +
> +typedef struct {
> + UINTN OperationCount;
> + EFI_I2C_OPERATION Operation[2];
> +} I2C_REG_REQUEST;
> +
> +#endif // I2C_LIB_INTERNAL_H__
> +
Blank line at EOF.
> diff --git a/Silicon/NXP/Library/I2cLib/I2cLib.c b/Silicon/NXP/Library/I2cLib/I2cLib.c
> new file mode 100644
> index 000000000000..34443cdaf763
> --- /dev/null
> +++ b/Silicon/NXP/Library/I2cLib/I2cLib.c
> @@ -0,0 +1,589 @@
> +/** @file
> + I2c Lib to control I2c controller.
> +
> + Copyright 2017, 2020 NXP
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Revision Reference:
> + - PI Version 1.7
> +
> + @par Glossary:
> + - Ibfd - I2c Bus Frequency Divider
> +**/
> +#include <Uefi.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/I2cLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/TimerLib.h>
> +
> +#include "I2cLibInternal.h"
> +
> +/**
> + I2C divisor and Ibfd register values when glitch filter is enabled
> +
> + In case of duplicate SCL Divisor value, the Ibfd value with high MUL value
> + has been selected. A higher MUL value results in a lower sampling rate of
> + the I2C signals. This gives the I2C module greater immunity against glitches
> + in the I2C signals.
> +
> + These values can be referred from NXP QorIQ Layerscape series SOC Reference
> + Manual in which this I2C ip has been used. e.g. LX2160ARM, LS1043ARM
> +**/
> +STATIC CONST I2C_CLOCK_DIVISOR_PAIR mI2cClockDivisorGlitchEnabled[] = {
> + { 34, 0x0 }, { 36, 0x1 }, { 38, 0x2 }, { 40, 0x3 },
> + { 42, 0x4 }, { 44, 0x8 }, { 48, 0x9 }, { 52, 0xA },
> + { 54, 0x7 }, { 56, 0xB }, { 60, 0xC }, { 64, 0x10 },
> + { 68, 0x40 }, { 72, 0x41 }, { 76, 0x42 }, { 80, 0x43 },
> + { 84, 0x44 }, { 88, 0x48 }, { 96, 0x49 }, { 104, 0x4A },
> + { 108, 0x47 }, { 112, 0x4B }, { 120, 0x4C }, { 128, 0x50 },
> + { 136, 0x80 }, { 144, 0x81 }, { 152, 0x82 }, { 160, 0x83 },
> + { 168, 0x84 }, { 176, 0x88 }, { 192, 0x89 }, { 208, 0x8A },
> + { 216, 0x87 }, { 224, 0x8B }, { 240, 0x8C }, { 256, 0x90 },
> + { 288, 0x91 }, { 320, 0x92 }, { 336, 0x8F }, { 352, 0x93 },
> + { 384, 0x98 }, { 416, 0x95 }, { 448, 0x99 }, { 480, 0x96 },
> + { 512, 0x9A }, { 576, 0x9B }, { 640, 0xA0 }, { 704, 0x9D },
> + { 768, 0xA1 }, { 832, 0x9E }, { 896, 0xA2 }, { 960, 0x67 },
> + { 1024, 0xA3 }, { 1152, 0xA4 }, { 1280, 0xA8 }, { 1536, 0xA9 },
> + { 1792, 0xAA }, { 1920, 0xA7 }, { 2048, 0xAB }, { 2304, 0xAC },
> + { 2560, 0xB0 }, { 3072, 0xB1 }, { 3584, 0xB2 }, { 3840, 0xAF },
> + { 4096, 0xB3 }, { 4608, 0xB4 }, { 5120, 0xB8 }, { 6144, 0xB9 },
> + { 7168, 0xBA }, { 7680, 0xB7 }, { 8192, 0xBB }, { 9216, 0xBC },
> + { 10240, 0xBD }, { 12288, 0xBE }, { 15360, 0xBF }
> +};
> +
> +/**
> + I2C divisor and Ibfd register values when glitch filter is disabled
> +
> + In case of duplicate SCL Divisor value, the Ibfd value with high MUL value
> + has been selected. A higher MUL value results in a lower sampling rate of
> + the I2C signals. This gives the I2C module greater immunity against glitches
> + in the I2C signals.
> +
> + These values can be referred from NXP QorIQ Layerscape series SOC Reference
> + Manual in which this I2C ip has been used. e.g. LX2160ARM, LS1043ARM
> +**/
> +STATIC CONST I2C_CLOCK_DIVISOR_PAIR mI2cClockDivisorGlitchDisabled[] = {
> + { 20, 0x0 },{ 22, 0x1 },{ 24, 0x2 },{ 26, 0x3 },
> + { 28, 0x8 },{ 30, 0x5 },{ 32, 0x9 },{ 34, 0x6 },
> + { 36, 0x0A },{ 40, 0x40 },{ 44, 0x41 },{ 48, 0x42 },
> + { 52, 0x43 },{ 56, 0x48 },{ 60, 0x45 },{ 64, 0x49 },
> + { 68, 0x46 },{ 72, 0x4A },{ 80, 0x80 },{ 88, 0x81 },
> + { 96, 0x82 },{ 104, 0x83 },{ 112, 0x88 },{ 120, 0x85 },
> + { 128, 0x89 },{ 136, 0x86 },{ 144, 0x8A },{ 160, 0x8B },
> + { 176, 0x8C },{ 192, 0x90 },{ 208, 0x56 },{ 224, 0x91 },
> + { 240, 0x1F },{ 256, 0x92 },{ 272, 0x8F },{ 288, 0x93 },
> + { 320, 0x98 },{ 352, 0x95 },{ 384, 0x99 },{ 416, 0x96 },
> + { 448, 0x9A },{ 480, 0x5F },{ 512, 0x9B },{ 576, 0x9C },
> + { 640, 0xA0 },{ 768, 0xA1 },{ 896, 0xA2 },{ 960, 0x9F },
> + { 1024, 0xA3 },{ 1152, 0xA4 },{ 1280, 0xA8 },{ 1536, 0xA9 },
> + { 1792, 0xAA },{ 1920, 0xA7 },{ 2048, 0xAB },{ 2304, 0xAC },
> + { 2560, 0xAD },{ 3072, 0xB1 },{ 3584, 0xB2 },{ 3840, 0xAF },
> + { 4096, 0xB3 },{ 4608, 0xB4 },{ 5120, 0xB8 },{ 6144, 0xB9 },
> + { 7168, 0xBA },{ 7680, 0xB7 },{ 8192, 0xBB },{ 9216, 0xBC },
> + { 10240, 0xBD },{ 12288, 0xBE },{ 15360, 0xBF }
> +};
> +
> +/**
> + A-009203 : I2C may not work reliably with the default setting
> +
> + Description : The clocking circuitry of I2C module may not work reliably due
> + to the slow rise time of SCL signal.
> + Workaround : Enable the receiver digital filter by setting IBDBG[GLFLT_EN]
> + to 1. refer https://patchwork.ozlabs.org/patch/453575/
> +**/
> +STATIC
> +VOID
> +I2cErratumA009203 (
> + IN UINTN Base
> + )
> +{
> + I2C_REGS *Regs;
> +
> + Regs = (I2C_REGS *)Base;
> +
> + MmioOr8 ((UINTN)&Regs->Ibdbg, I2C_IBDBG_GLFLT_EN);
> +}
> +
> +/**
> + software reset of the entire I2C module.
> + The module is reset and disabled.
> + Status register fields (IBSR) are cleared.
> +
> + @param[in] Base Base Address of I2c controller's registers
> +
> + @return EFI_SUCCESS successfuly reset the I2c module
> +**/
> +EFI_STATUS
> +I2cReset (
> + IN UINTN Base
> + )
> +{
> + I2C_REGS *Regs;
> +
> + Regs = (I2C_REGS *)Base;
> +
> + MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_MDIS);
> + MmioOr8 ((UINTN)&Regs->Ibsr, (I2C_IBSR_IBAL | I2C_IBSR_IBIF));
> + MmioAnd8 ((UINTN)&Regs->Ibcr, ~(I2C_IBCR_IBIE | I2C_IBCR_DMAEN));
> + MmioAnd8 ((UINTN)&Regs->Ibic, (UINT8)(~I2C_IBIC_BIIE));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Early init I2C for reading the sysclk from I2c slave device.
> + I2c bus clock is determined from the clock input to I2c controller.
> + The clock input to I2c controller is derived from the sysclk.
> + sysclk is determined by clock generator, which is controller by i2c.
> +
> + So, it's a chicken-egg problem to read the sysclk from clock generator.
> + To break this cycle (i.e. to read the sysclk), we setup the i2c bus clock to
> + lowest value, in the hope that it won't be out of clock generator's supported
> + i2c clock frequency. Once we have the correct sysclk, we can setup the
> + correct i2c bus clock.
> +
> + @param[in] Base Base Address of I2c controller's registers
> +
> + @return EFI_SUCCESS successfuly setup the i2c bus for reading sysclk
> +**/
> +EFI_STATUS
> +I2cEarlyInitialize (
> + IN UINTN Base
> + )
> +{
> + I2C_REGS *Regs;
> + UINT8 Ibfd;
> +
> + Regs = (I2C_REGS *)Base;
> + if (FeaturePcdGet (PcdI2cErratumA009203)) {
> + // Apply Erratum A-009203 before writing Ibfd register
It is an improvement, but there is still nothing in here that makes it
obvious why this is being done twice. The referenced u-boot patch does
it only once.
Hmm, furthermore, I don't see this function called at all? Why is it
included? If you delete it (and its declaration in .h), I'm OK with
the result.
> + I2cErratumA009203 (Base);
> + }
> +
> + if (MmioRead8 ((UINTN)&Regs->Ibdbg) & I2C_IBDBG_GLFLT_EN) {
> + Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchEnabled).Ibfd;
> + } else {
> + Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchDisabled).Ibfd;
> + }
> +
> + MmioWrite8 ((UINTN)&Regs->Ibfd, Ibfd);
> +
> + I2cReset (Base);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Configure I2c bus to operate at a given speed
> +
> + @param[in] Base Base Address of I2c controller's registers
> + @param[in] I2cBusClock Input clock to I2c controller
> + @param[in] Speed speed to be configured for I2c bus
> +
> + @return EFI_SUCCESS successfuly setup the i2c bus
> +**/
> +EFI_STATUS
> +I2cInitialize (
> + IN UINTN Base,
> + IN UINT64 I2cBusClock,
> + IN UINT64 Speed
> + )
> +{
> + I2C_REGS *Regs;
> + UINT16 ClockDivisor;
> + UINT8 Ibfd; // I2c Bus Frequency Divider Register
> + CONST I2C_CLOCK_DIVISOR_PAIR *ClockDivisorPair;
> + UINT32 ClockDivisorPairSize;
> + UINT32 Index;
> +
> + Regs = (I2C_REGS *)Base;
> + if (FeaturePcdGet (PcdI2cErratumA009203)) {
> + // Apply Erratum A-009203 before writing Ibfd register
> + I2cErratumA009203 (Base);
> + }
> +
> + Ibfd = 0;
> + ClockDivisor = (I2cBusClock + Speed - 1) / Speed;
> +
> + if (MmioRead8 ((UINTN)&Regs->Ibdbg) & I2C_IBDBG_GLFLT_EN) {
> + ClockDivisorPair = mI2cClockDivisorGlitchEnabled;
> + ClockDivisorPairSize = ARRAY_SIZE (mI2cClockDivisorGlitchEnabled);
> + } else {
> + ClockDivisorPair = mI2cClockDivisorGlitchDisabled;
> + ClockDivisorPairSize = ARRAY_SIZE (mI2cClockDivisorGlitchDisabled);
> + }
> +
> + if (ClockDivisor > ClockDivisorPair[ClockDivisorPairSize - 1].Divisor) {
> + Ibfd = ClockDivisorPair[ClockDivisorPairSize - 1].Ibfd;
> + } else {
> + for (Index = 0; Index < ClockDivisorPairSize; Index++) {
> + if (ClockDivisorPair[Index].Divisor >= ClockDivisor) {
> + Ibfd = ClockDivisorPair[Index].Ibfd;
> + break;
> + }
> + }
> + }
> +
> + MmioWrite8 ((UINTN)&Regs->Ibfd, Ibfd);
> +
> + I2cReset (Base);
> +
> + return EFI_SUCCESS;
> +}
> +
> +STATIC
> +EFI_STATUS
> +I2cBusTestBusBusy (
> + IN I2C_REGS *Regs,
> + IN BOOLEAN TestBusy
> + )
> +{
> + UINT32 Index;
> + UINT8 Reg;
> +
> + for (Index = 0; Index < I2C_NUM_RETRIES; Index++) {
> + Reg = MmioRead8 ((UINTN)&Regs->Ibsr);
> +
> + if (Reg & I2C_IBSR_IBAL) {
> + MmioWrite8 ((UINTN)&Regs->Ibsr, Reg);
> + return EFI_NOT_READY;
> + }
> +
> + if (TestBusy && (Reg & I2C_IBSR_IBB)) {
> + break;
> + }
> +
> + if (!TestBusy && !(Reg & I2C_IBSR_IBB)) {
> + break;
> + }
> +
> + MicroSecondDelay (1);
> + }
> +
> + if (Index == I2C_NUM_RETRIES) {
> + return EFI_TIMEOUT;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +STATIC
> +EFI_STATUS
> +I2cTransferComplete (
> + IN I2C_REGS *Regs,
> + IN BOOLEAN TestRxAck
> +)
> +{
> + UINT32 Index;
> + UINT8 Reg;
> +
> + for (Index = 0; Index < I2C_NUM_RETRIES; Index++) {
> + Reg = MmioRead8 ((UINTN)&Regs->Ibsr);
> +
> + if (Reg & I2C_IBSR_IBIF) {
> + // Write 1 to clear the IBIF field
> + MmioWrite8 ((UINTN)&Regs->Ibsr, Reg);
> + break;
> + }
> +
> + MicroSecondDelay (1);
> + }
> +
> + if (Index == I2C_NUM_RETRIES) {
> + return EFI_TIMEOUT;
> + }
> +
> + if (TestRxAck && (Reg & I2C_IBSR_RXAK)) {
> + return EFI_NO_RESPONSE;
> + }
> +
> + if (Reg & I2C_IBSR_TCF) {
> + return EFI_SUCCESS;
> + }
> +
> + return EFI_DEVICE_ERROR;
> +}
> +
> +STATIC
> +EFI_STATUS
> +I2cRead (
> + IN I2C_REGS *Regs,
> + IN UINT32 SlaveAddress,
> + IN EFI_I2C_OPERATION *Operation,
> + IN BOOLEAN IsLastOperation
> +)
> +{
> + EFI_STATUS Status;
> + UINTN Index;
> +
> + // Write Slave Address
> + MmioWrite8 ((UINTN)&Regs->Ibdr, (SlaveAddress << BIT0) | BIT0);
> + Status = I2cTransferComplete (Regs, I2C_BUS_TEST_RX_ACK);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> + // select Receive mode.
> + MmioAnd8 ((UINTN)&Regs->Ibcr, ~I2C_IBCR_TXRX);
> + if (Operation->LengthInBytes > 1) {
> + // Set No ACK = 0
> + MmioAnd8 ((UINTN)&Regs->Ibcr, ~I2C_IBCR_NOACK);
> + }
> +
> + // Perform a dummy read to initiate the receive operation.
> + MmioRead8 ((UINTN)&Regs->Ibdr);
> +
> + for (Index = 0; Index < Operation->LengthInBytes; Index++) {
> + Status = I2cTransferComplete (Regs, I2C_BUS_NO_TEST_RX_ACK);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> + if (Index == (Operation->LengthInBytes - 2)) {
> + // Set No ACK = 1
> + MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_NOACK);
> + } else if (Index == (Operation->LengthInBytes - 1)) {
> + if (!IsLastOperation) {
> + // select Transmit mode (for repeat start)
> + MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_TXRX);
> + } else {
> + // Generate Stop Signal
> + MmioAnd8 ((UINTN)&Regs->Ibcr, ~(I2C_IBCR_MSSL | I2C_IBCR_TXRX));
> + Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_IDLE);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> + }
> + }
> + Operation->Buffer[Index] = MmioRead8 ((UINTN)&Regs->Ibdr);
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +STATIC
> +EFI_STATUS
> +I2cWrite (
> + IN I2C_REGS *Regs,
> + IN UINT32 SlaveAddress,
> + IN EFI_I2C_OPERATION *Operation
> +)
> +{
> + EFI_STATUS Status;
> + UINTN Index;
> +
> + // Write Slave Address
> + MmioWrite8 ((UINTN)&Regs->Ibdr, (SlaveAddress << BIT0) & (UINT8)(~BIT0));
> + Status = I2cTransferComplete (Regs, I2C_BUS_TEST_RX_ACK);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + // Write Data
> + for (Index = 0; Index < Operation->LengthInBytes; Index++) {
> + MmioWrite8 ((UINTN)&Regs->Ibdr, Operation->Buffer[Index]);
> + Status = I2cTransferComplete (Regs, I2C_BUS_TEST_RX_ACK);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> + }
> + return EFI_SUCCESS;
> +}
> +
> +STATIC
> +EFI_STATUS
> +I2cStop (
> + IN I2C_REGS *Regs
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 Reg;
> +
> + Status = EFI_SUCCESS;
> + Reg = MmioRead8 ((UINTN)&Regs->Ibsr);
> + if (Reg & I2C_IBSR_IBB) {
> + // Generate Stop Signal
> + MmioAnd8 ((UINTN)&Regs->Ibcr, ~(I2C_IBCR_MSSL | I2C_IBCR_TXRX));
> + Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_IDLE);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> + }
> +
> + // Disable I2c Controller
> + MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_MDIS);
> +
> + return Status;
> +}
> +
> +STATIC
> +EFI_STATUS
> +I2cStart (
> + IN I2C_REGS *Regs
> + )
> +{
> + EFI_STATUS Status;
> +
> + MmioOr8 ((UINTN)&Regs->Ibsr, (I2C_IBSR_IBAL | I2C_IBSR_IBIF));
> + MmioAnd8 ((UINTN)&Regs->Ibcr, (UINT8)(~I2C_IBCR_MDIS));
> +
> + //Wait controller to be stable
> + MicroSecondDelay (1);
> +
> + // Generate Start Signal
> + MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_MSSL);
> + Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_BUSY);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + // Select Transmit Mode. set No ACK = 1
> + MmioOr8 ((UINTN)&Regs->Ibcr, (I2C_IBCR_TXRX | I2C_IBCR_NOACK));
> +
> + return Status;
> +}
> +
> +/**
> + Transfer data to/from I2c slave device
> +
> + @param[in] Base Base Address of I2c controller's registers
> + @param[in] SlaveAddress Slave Address from which data is to be read
> + @param[in] RequestPacket Pointer to an EFI_I2C_REQUEST_PACKET structure
> + describing the I2C transaction
> +
> + @return EFI_SUCCESS successfuly transfer the data
> + @return EFI_DEVICE_ERROR There was an error while transferring data through
> + I2c bus
> + @return EFI_NO_RESPONSE There was no Ack from i2c device
> + @return EFI_TIMEOUT I2c Bus is busy
> + @return EFI_NOT_READY I2c Bus Arbitration lost
> +**/
> +EFI_STATUS
> +I2cBusXfer (
> + IN UINTN Base,
> + IN UINT32 SlaveAddress,
> + IN EFI_I2C_REQUEST_PACKET *RequestPacket
> + )
> +{
> + UINTN Index;
> + I2C_REGS *Regs;
> + EFI_I2C_OPERATION *Operation;
> + EFI_STATUS Status;
> + BOOLEAN IsLastOperation;
> +
> + Regs = (I2C_REGS *)Base;
> + IsLastOperation = FALSE;
> +
> + Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_IDLE);
> + if (EFI_ERROR (Status)) {
> + goto ErrorExit;
> + }
> +
> + Status = I2cStart (Regs);
> + if (EFI_ERROR (Status)) {
> + goto ErrorExit;
> + }
> +
> + for (Index = 0, Operation = RequestPacket->Operation;
> + Index < RequestPacket->OperationCount;
> + Index++, Operation++) {
> + if (Index == (RequestPacket->OperationCount - 1)) {
> + IsLastOperation = TRUE;
> + }
> + // Send repeat start after first transmit/recieve
> + if (Index) {
> + MmioOr8 ((UINTN)&Regs->Ibcr, I2C_IBCR_RSTA);
> + Status = I2cBusTestBusBusy (Regs, I2C_BUS_TEST_BUSY);
> + if (EFI_ERROR (Status)) {
> + goto ErrorExit;
> + }
> + }
> + // Read/write data
> + if (Operation->Flags & I2C_FLAG_READ) {
> + Status = I2cRead (Regs, SlaveAddress, Operation, IsLastOperation);
> + } else {
> + Status = I2cWrite (Regs, SlaveAddress, Operation);
> + }
> + if (EFI_ERROR (Status)) {
> + goto ErrorExit;
> + }
> + }
> +
> +ErrorExit:
> +
> + I2cStop (Regs);
> +
> + return Status;
> +}
> +
> +/**
> + Read a register from I2c slave device. This API is wrapper around I2cBusXfer
> +
> + @param[in] Base Base Address of I2c controller's registers
> + @param[in] SlaveAddress Slave Address from which register value is
> + to be read
> + @param[in] RegAddress Register Address in Slave's memory map
> + @param[in] RegAddressWidthInBytes Number of bytes in RegAddress to send to
> + I2c Slave for simple reads without any
> + register, make this value = 0
> + (RegAddress is don't care in that case)
> + @param[out] RegValue Value to be read from I2c slave's regiser
> + @param[in] RegValueNumBytes Number of bytes to read from I2c slave
> + register
> +
> + @return EFI_SUCCESS successfuly read the registers
> + @return EFI_DEVICE_ERROR There was an error while transferring data through
> + I2c bus
> + @return EFI_NO_RESPONSE There was no Ack from i2c device
> + @return EFI_TIMEOUT I2c Bus is busy
> + @return EFI_NOT_READY I2c Bus Arbitration lost
> +**/
> +EFI_STATUS
> +I2cBusReadReg (
> + IN UINTN Base,
> + IN UINT32 SlaveAddress,
> + IN UINT64 RegAddress,
> + IN UINT8 RegAddressWidthInBytes,
> + OUT UINT8 *RegValue,
> + IN UINT32 RegValueNumBytes
> + )
> +{
> + EFI_I2C_OPERATION *Operations;
> + I2C_REG_REQUEST RequestPacket;
> + UINTN OperationCount;
> + UINT8 Address[sizeof (RegAddress)];
> + UINT8 *AddressPtr;
> + EFI_STATUS Status;
> +
> + ZeroMem (&RequestPacket, sizeof (RequestPacket));
> + OperationCount = 0;
> + Operations = RequestPacket.Operation;
> + AddressPtr = Address;
> +
> + if (RegAddressWidthInBytes > ARRAY_SIZE (Address)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (RegAddressWidthInBytes != 0) {
> + Operations[OperationCount].LengthInBytes = RegAddressWidthInBytes;
> + Operations[OperationCount].Buffer = AddressPtr;
> + while (RegAddressWidthInBytes--) {
> + *AddressPtr++ = RegAddress >> (8 * RegAddressWidthInBytes);
> + }
> + OperationCount++;
> + }
> +
> + Operations[OperationCount].LengthInBytes = RegValueNumBytes;
> + Operations[OperationCount].Buffer = RegValue;
> + Operations[OperationCount].Flags = I2C_FLAG_READ;
> + OperationCount++;
> +
> + RequestPacket.OperationCount = OperationCount;
> +
> + Status = I2cBusXfer (
> + Base, SlaveAddress,
> + (EFI_I2C_REQUEST_PACKET *)&RequestPacket
> + );
> +
> + return Status;
> +}
> +
Blank line at EOF.
Regards,
Leif
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 02/24] Silicon/NXP: changes to use I2clib in i2cdxe
2020-04-15 12:13 ` [PATCH edk2-platforms v3 02/24] Silicon/NXP: changes to use I2clib in i2cdxe Pankaj Bansal
@ 2020-04-22 16:41 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-22 16:41 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:20 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> I2c lib contains the i2c controller functionality. this can be used
> in I2c DXE driver to communicate with i2c devices.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
> ---
>
> Notes:
> - moved I2cLib addition to NxpQoriqLs.dsc.inc
>
> Platform/NXP/NxpQoriqLs.dsc.inc | 4 +-
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 9 +-
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.h | 44 +-
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 526 +-------------------
> 4 files changed, 19 insertions(+), 564 deletions(-)
>
> diff --git a/Platform/NXP/NxpQoriqLs.dsc.inc b/Platform/NXP/NxpQoriqLs.dsc.inc
> index fa5f30dd3909..25c0a41e5d4a 100644
> --- a/Platform/NXP/NxpQoriqLs.dsc.inc
> +++ b/Platform/NXP/NxpQoriqLs.dsc.inc
> @@ -1,6 +1,6 @@
> # @file
> #
> -# Copyright 2017-2019 NXP.
> +# Copyright 2017-2020 NXP
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -94,6 +94,8 @@
> NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
>
> + I2cLib|Silicon/NXP/Library/I2cLib/I2cLib.inf
> +
> [LibraryClasses.common.SEC]
> PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
> diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
> index 0c0bf63bb2e2..84adb837c249 100644
> --- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
> +++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
> @@ -3,7 +3,7 @@
> # Component description file for I2c driver
> #
> # Copyright (c) 2015, Freescale Semiconductor, Inc. All rights reserved.
> -# Copyright 2017-2019 NXP
> +# Copyright 2017-2020 NXP
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -27,6 +27,7 @@
> ArmLib
> BaseMemoryLib
> DevicePathLib
> + I2cLib
> IoLib
> MemoryAllocationLib
> PcdLib
> @@ -48,11 +49,5 @@
> gEdkiiNonDiscoverableDeviceProtocolGuid ## TO_START
> gEfiI2cMasterProtocolGuid ## BY_START
>
> -[Pcd]
> - gNxpQoriqLsTokenSpaceGuid.PcdI2cSpeed
> - gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr
> - gNxpQoriqLsTokenSpaceGuid.PcdI2cSize
> - gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController
> -
> [Depex]
> TRUE
> diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
> index 02a29a5cf2b9..88316f313380 100644
> --- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
> +++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
> @@ -1,7 +1,7 @@
> /** I2cDxe.h
> Header defining the constant, base address amd function for I2C controller
>
> - Copyright 2017-2019 NXP
> + Copyright 2017-2020 NXP
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -16,32 +16,6 @@
> #include <Protocol/I2cMaster.h>
> #include <Protocol/NonDiscoverableDevice.h>
>
> -#define I2C_CR_IIEN (1 << 6)
> -#define I2C_CR_MSTA (1 << 5)
> -#define I2C_CR_MTX (1 << 4)
> -#define I2C_CR_TX_NO_AK (1 << 3)
> -#define I2C_CR_RSTA (1 << 2)
> -
> -#define I2C_SR_ICF (1 << 7)
> -#define I2C_SR_IBB (1 << 5)
> -#define I2C_SR_IAL (1 << 4)
> -#define I2C_SR_IIF (1 << 1)
> -#define I2C_SR_RX_NO_AK (1 << 0)
> -
> -#define I2C_CR_IEN (0 << 7)
> -#define I2C_CR_IDIS (1 << 7)
> -#define I2C_SR_IIF_CLEAR (1 << 1)
> -
> -#define BUS_IDLE (0 | (I2C_SR_IBB << 8))
> -#define BUS_BUSY (I2C_SR_IBB | (I2C_SR_IBB << 8))
> -#define IIF (I2C_SR_IIF | (I2C_SR_IIF << 8))
> -
> -#define I2C_FLAG_WRITE 0x0
> -
> -#define I2C_STATE_RETRIES 50000
> -
> -#define RETRY_COUNT 3
> -
> #define NXP_I2C_SIGNATURE SIGNATURE_32 ('N', 'I', '2', 'C')
> #define NXP_I2C_FROM_THIS(a) CR ((a), NXP_I2C_MASTER, \
> I2cMaster, NXP_I2C_SIGNATURE)
> @@ -63,22 +37,6 @@ typedef struct {
> NON_DISCOVERABLE_DEVICE *Dev;
> } NXP_I2C_MASTER;
>
> -/**
> - Record defining i2c registers
> -**/
> -typedef struct {
> - UINT8 I2cAdr;
> - UINT8 I2cFdr;
> - UINT8 I2cCr;
> - UINT8 I2cSr;
> - UINT8 I2cDr;
> -} I2C_REGS;
> -
> -typedef struct {
> - UINT16 SCLDivider;
> - UINT16 BusClockRate;
> -} CLK_DIV;
> -
> extern
> UINT64
> GetBusFrequency (
> diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
> index 853c426fbca2..848e707c1673 100644
> --- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
> +++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
> @@ -1,7 +1,7 @@
> /** I2cDxe.c
> I2c driver APIs for read, write, initialize, set speed and reset
>
> - Copyright 2017-2019 NXP
> + Copyright 2017-2020 NXP
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -10,6 +10,7 @@
> #include <Library/BaseMemoryLib.h>
> #include <Library/DebugLib.h>
> #include <Library/DevicePathLib.h>
> +#include <Library/I2cLib.h>
> #include <Library/IoLib.h>
> #include <Library/MemoryAllocationLib.h>
> #include <Library/TimerLib.h>
> @@ -25,444 +26,6 @@ STATIC CONST EFI_I2C_CONTROLLER_CAPABILITIES mI2cControllerCapabilities = {
> 0
> };
>
> -STATIC CONST CLK_DIV mClkDiv[] = {
> - { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
> - { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
> - { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
> - { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
> - { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
> - { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
> - { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
> - { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
> - { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
> - { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
> - { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
> - { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
> - { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
> - { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
> - { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E }
> -};
> -
> -/**
> - Calculate and return proper clock divider
> -
> - @param Rate desired clock rate
> -
> - @retval ClkDiv Index value used to get Bus Clock Rate
> -
> -**/
> -STATIC
> -UINT8
> -GetClkDivIndex (
> - IN UINT32 Rate
> - )
> -{
> - UINTN ClkRate;
> - UINT32 Div;
> - UINT8 Index;
> -
> - Index = 0;
> - ClkRate = GetBusFrequency ();
> -
> - Div = (ClkRate + Rate - 1) / Rate;
> -
> - if (Div < mClkDiv[0].SCLDivider) {
> - return 0;
> - }
> -
> - do {
> - if (mClkDiv[Index].SCLDivider >= Div ) {
> - return Index;
> - }
> - Index++;
> - } while (Index < ARRAY_SIZE (mClkDiv));
> -
> - return (ARRAY_SIZE (mClkDiv) - 1);
> -}
> -
> -/**
> - Function used to check if i2c is in mentioned state or not
> -
> - @param I2cRegs Pointer to I2C registers
> - @param State i2c state need to be checked
> -
> - @retval EFI_NOT_READY Arbitration was lost
> - @retval EFI_TIMEOUT Timeout occured
> - @retval CurrState Value of state register
> -
> -**/
> -STATIC
> -EFI_STATUS
> -WaitForI2cState (
> - IN I2C_REGS *I2cRegs,
> - IN UINT32 State
> - )
> -{
> - UINT8 CurrState;
> - UINT64 Count;
> -
> - for (Count = 0; Count < I2C_STATE_RETRIES; Count++) {
> - MemoryFence ();
> - CurrState = MmioRead8 ((UINTN)&I2cRegs->I2cSr);
> - if (CurrState & I2C_SR_IAL) {
> - MmioWrite8 ((UINTN)&I2cRegs->I2cSr, CurrState | I2C_SR_IAL);
> - return EFI_NOT_READY;
> - }
> -
> - if ((CurrState & (State >> 8)) == (UINT8)State) {
> - return CurrState;
> - }
> - }
> -
> - return EFI_TIMEOUT;
> -}
> -
> -/**
> - Function to transfer byte on i2c
> -
> - @param I2cRegs Pointer to i2c registers
> - @param Byte Byte to be transferred on i2c bus
> -
> - @retval EFI_NOT_READY Arbitration was lost
> - @retval EFI_TIMEOUT Timeout occured
> - @retval EFI_NOT_FOUND ACK was not recieved
> - @retval EFI_SUCCESS Data transfer was succesful
> -
> -**/
> -STATIC
> -EFI_STATUS
> -TransferByte (
> - IN I2C_REGS *I2cRegs,
> - IN UINT8 Byte
> - )
> -{
> - EFI_STATUS RetVal;
> -
> - MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
> - MmioWrite8 ((UINTN)&I2cRegs->I2cDr, Byte);
> -
> - RetVal = WaitForI2cState (I2cRegs, IIF);
> - if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
> - return RetVal;
> - }
> -
> - if (RetVal & I2C_SR_RX_NO_AK) {
> - return EFI_NOT_FOUND;
> - }
> -
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - Function to stop transaction on i2c bus
> -
> - @param I2cRegs Pointer to i2c registers
> -
> - @retval EFI_NOT_READY Arbitration was lost
> - @retval EFI_TIMEOUT Timeout occured
> - @retval EFI_SUCCESS Stop operation was successful
> -
> -**/
> -STATIC
> -EFI_STATUS
> -I2cStop (
> - IN I2C_REGS *I2cRegs
> - )
> -{
> - EFI_STATUS RetVal;
> - UINT32 Temp;
> -
> - Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
> -
> - Temp &= ~(I2C_CR_MSTA | I2C_CR_MTX);
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
> -
> - RetVal = WaitForI2cState (I2cRegs, BUS_IDLE);
> -
> - if (RetVal < 0) {
> - return RetVal;
> - } else {
> - return EFI_SUCCESS;
> - }
> -}
> -
> -/**
> - Function to send start signal, Chip Address and
> - memory offset
> -
> - @param I2cRegs Pointer to i2c base registers
> - @param Chip Chip Address
> - @param Offset Slave memory's offset
> - @param AddressLength length of chip address
> -
> - @retval EFI_NOT_READY Arbitration lost
> - @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
> - @retval EFI_NOT_FOUND ACK was not recieved
> - @retval EFI_SUCCESS Read was successful
> -
> -**/
> -STATIC
> -EFI_STATUS
> -InitTransfer (
> - IN I2C_REGS *I2cRegs,
> - IN UINT8 Chip,
> - IN UINT32 Offset,
> - IN INT32 AddressLength
> - )
> -{
> - UINT32 Temp;
> - EFI_STATUS RetVal;
> -
> - // Enable I2C controller
> - if (MmioRead8 ((UINTN)&I2cRegs->I2cCr) & I2C_CR_IDIS) {
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IEN);
> - }
> -
> - if (MmioRead8 ((UINTN)&I2cRegs->I2cAdr) == (Chip << 1)) {
> - MmioWrite8 ((UINTN)&I2cRegs->I2cAdr, (Chip << 1) ^ 2);
> - }
> -
> - MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
> - RetVal = WaitForI2cState (I2cRegs, BUS_IDLE);
> - if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
> - return RetVal;
> - }
> -
> - // Start I2C transaction
> - Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
> - // set to master mode
> - Temp |= I2C_CR_MSTA;
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
> -
> - RetVal = WaitForI2cState (I2cRegs, BUS_BUSY);
> - if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
> - return RetVal;
> - }
> -
> - Temp |= I2C_CR_MTX | I2C_CR_TX_NO_AK;
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
> -
> - // write slave Address
> - RetVal = TransferByte (I2cRegs, Chip << 1);
> - if (RetVal != EFI_SUCCESS) {
> - return RetVal;
> - }
> -
> - if (AddressLength >= 0) {
> - while (AddressLength--) {
> - RetVal = TransferByte (I2cRegs, (Offset >> (AddressLength * 8)) & 0xff);
> - if (RetVal != EFI_SUCCESS)
> - return RetVal;
> - }
> - }
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - Function to check if i2c bus is idle
> -
> - @param Base Pointer to base address of I2c controller
> -
> - @retval EFI_SUCCESS
> -
> -**/
> -STATIC
> -INT32
> -I2cBusIdle (
> - IN VOID *Base
> - )
> -{
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - Function to initiate data transfer on i2c bus
> -
> - @param I2cRegs Pointer to i2c base registers
> - @param Chip Chip Address
> - @param Offset Slave memory's offset
> - @param AddressLength length of chip address
> -
> - @retval EFI_NOT_READY Arbitration lost
> - @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
> - @retval EFI_NOT_FOUND ACK was not recieved
> - @retval EFI_SUCCESS Read was successful
> -
> -**/
> -STATIC
> -EFI_STATUS
> -InitDataTransfer (
> - IN I2C_REGS *I2cRegs,
> - IN UINT8 Chip,
> - IN UINT32 Offset,
> - IN INT32 AddressLength
> - )
> -{
> - EFI_STATUS RetVal;
> - INT32 Retry;
> -
> - for (Retry = 0; Retry < RETRY_COUNT; Retry++) {
> - RetVal = InitTransfer (I2cRegs, Chip, Offset, AddressLength);
> - if (RetVal == EFI_SUCCESS) {
> - return EFI_SUCCESS;
> - }
> -
> - I2cStop (I2cRegs);
> -
> - if (EFI_NOT_FOUND == RetVal) {
> - return RetVal;
> - }
> -
> - // Disable controller
> - if (RetVal != EFI_NOT_READY) {
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IDIS);
> - }
> -
> - if (I2cBusIdle (I2cRegs) < 0) {
> - break;
> - }
> - }
> - return RetVal;
> -}
> -
> -/**
> - Function to read data using i2c bus
> -
> - @param BaseAddr I2c Controller Base Address
> - @param Chip Address of slave device from where data to be read
> - @param Offset Offset of slave memory
> - @param AddressLength Address length of slave
> - @param Buffer A pointer to the destination buffer for the data
> - @param Len Length of data to be read
> -
> - @retval EFI_NOT_READY Arbitration lost
> - @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
> - @retval EFI_NOT_FOUND ACK was not recieved
> - @retval EFI_SUCCESS Read was successful
> -
> -**/
> -STATIC
> -EFI_STATUS
> -I2cDataRead (
> - IN UINTN BaseAddr,
> - IN UINT8 Chip,
> - IN UINT32 Offset,
> - IN UINT32 AddressLength,
> - IN UINT8 *Buffer,
> - IN UINT32 Len
> - )
> -{
> - EFI_STATUS RetVal;
> - UINT32 Temp;
> - INT32 I;
> - I2C_REGS *I2cRegs;
> -
> - I2cRegs = (I2C_REGS *)(BaseAddr);
> -
> - RetVal = InitDataTransfer (I2cRegs, Chip, Offset, AddressLength);
> - if (RetVal != EFI_SUCCESS) {
> - return RetVal;
> - }
> -
> - Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
> - Temp |= I2C_CR_RSTA;
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
> -
> - RetVal = TransferByte (I2cRegs, (Chip << 1) | 1);
> - if (RetVal != EFI_SUCCESS) {
> - I2cStop (I2cRegs);
> - return RetVal;
> - }
> -
> - // setup bus to read data
> - Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
> - Temp &= ~(I2C_CR_MTX | I2C_CR_TX_NO_AK);
> - if (Len == 1) {
> - Temp |= I2C_CR_TX_NO_AK;
> - }
> -
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
> - MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
> -
> - // Dummy Read to initiate recieve operation
> - MmioRead8 ((UINTN)&I2cRegs->I2cDr);
> -
> - for (I = 0; I < Len; I++) {
> - RetVal = WaitForI2cState (I2cRegs, IIF);
> - if ((RetVal == EFI_TIMEOUT) || (RetVal == EFI_NOT_READY)) {
> - I2cStop (I2cRegs);
> - return RetVal;
> - }
> - //
> - // It must generate STOP before read I2DR to prevent
> - // controller from generating another clock cycle
> - //
> - if (I == (Len - 1)) {
> - I2cStop (I2cRegs);
> - } else if (I == (Len - 2)) {
> - Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
> - Temp |= I2C_CR_TX_NO_AK;
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
> - }
> - MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
> - Buffer[I] = MmioRead8 ((UINTN)&I2cRegs->I2cDr);
> - }
> -
> - I2cStop (I2cRegs);
> -
> - return EFI_SUCCESS;
> -}
> -
> -/**
> - Function to write data using i2c bus
> -
> - @param BaseAddr I2c Controller Base Address
> - @param Chip Address of slave device where data to be written
> - @param Offset Offset of slave memory
> - @param AddressLength Address length of slave
> - @param Buffer A pointer to the source buffer for the data
> - @param Len Length of data to be write
> -
> - @retval EFI_NOT_READY Arbitration lost
> - @retval EFI_TIMEOUT Failed to initialize data transfer in predefined time
> - @retval EFI_NOT_FOUND ACK was not recieved
> - @retval EFI_SUCCESS Read was successful
> -
> -**/
> -STATIC
> -EFI_STATUS
> -I2cDataWrite (
> - IN UINTN BaseAddr,
> - IN UINT8 Chip,
> - IN UINT32 Offset,
> - IN INT32 AddressLength,
> - OUT UINT8 *Buffer,
> - IN INT32 Len
> - )
> -{
> - EFI_STATUS RetVal;
> - I2C_REGS *I2cRegs;
> - INT32 I;
> -
> - I2cRegs = (I2C_REGS *)BaseAddr;
> -
> - RetVal = InitDataTransfer (I2cRegs, Chip, Offset, AddressLength);
> - if (RetVal != EFI_SUCCESS) {
> - return RetVal;
> - }
> -
> - // Write operation
> - for (I = 0; I < Len; I++) {
> - RetVal = TransferByte (I2cRegs, Buffer[I]);
> - if (RetVal != EFI_SUCCESS) {
> - break;
> - }
> - }
> -
> - I2cStop (I2cRegs);
> - return RetVal;
> -}
> -
> /**
> Function to set i2c bus frequency
>
> @@ -479,22 +42,17 @@ SetBusFrequency (
> IN OUT UINTN *BusClockHertz
> )
> {
> - I2C_REGS *I2cRegs;
> - UINT8 ClkId;
> - UINT8 SpeedId;
> + UINTN I2cBase;
> + UINT64 I2cClock;
> NXP_I2C_MASTER *I2c;
>
> I2c = NXP_I2C_FROM_THIS (This);
>
> - I2cRegs = (I2C_REGS *)(I2c->Dev->Resources[0].AddrRangeMin);
> + I2cBase = (UINTN)(I2c->Dev->Resources[0].AddrRangeMin);
>
> - ClkId = GetClkDivIndex (*BusClockHertz);
> - SpeedId = mClkDiv[ClkId].BusClockRate;
> + I2cClock = GetBusFrequency ();
>
> - // Store divider value
> - MmioWrite8 ((UINTN)&I2cRegs->I2cFdr, SpeedId);
> -
> - MemoryFence ();
> + I2cInitialize (I2cBase, I2cClock, *BusClockHertz);
>
> return EFI_SUCCESS;
> }
> @@ -513,19 +71,6 @@ Reset (
> IN CONST EFI_I2C_MASTER_PROTOCOL *This
> )
> {
> - I2C_REGS *I2cRegs;
> - NXP_I2C_MASTER *I2c;
> -
> - I2c = NXP_I2C_FROM_THIS (This);
> -
> - I2cRegs = (I2C_REGS *)(I2c->Dev->Resources[0].AddrRangeMin);
> -
> - // Reset module
> - MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IDIS);
> - MmioWrite8 ((UINTN)&I2cRegs->I2cSr, 0);
> -
> - MemoryFence ();
> -
> return EFI_SUCCESS;
> }
>
> @@ -540,62 +85,17 @@ StartRequest (
> OUT EFI_STATUS *I2cStatus OPTIONAL
> )
> {
> - NXP_I2C_MASTER *I2c;
> - UINT32 Count;
> - INT32 RetVal;
> - UINT32 Length;
> - UINT8 *Buffer;
> - UINT32 Flag;
> - UINT32 RegAddress;
> - UINT32 OffsetLength;
> -
> - RegAddress = 0;
> + NXP_I2C_MASTER *I2c;
> + UINTN I2cBase;
> + EFI_STATUS Status;
>
> I2c = NXP_I2C_FROM_THIS (This);
>
> - if (RequestPacket->OperationCount <= 0) {
> - DEBUG ((DEBUG_ERROR,"%a: Operation count is not valid %d\n",
> - __FUNCTION__, RequestPacket->OperationCount));
> - return EFI_INVALID_PARAMETER;
> - }
> + I2cBase = (UINTN)(I2c->Dev->Resources[0].AddrRangeMin);
>
> - OffsetLength = RequestPacket->Operation[0].LengthInBytes;
> - RegAddress = *RequestPacket->Operation[0].Buffer;
> + Status = I2cBusXfer (I2cBase, SlaveAddress, RequestPacket);
>
> - for (Count = 1; Count < RequestPacket->OperationCount; Count++) {
> - Flag = RequestPacket->Operation[Count].Flags;
> - Length = RequestPacket->Operation[Count].LengthInBytes;
> - Buffer = RequestPacket->Operation[Count].Buffer;
> -
> - if (Length <= 0) {
> - DEBUG ((DEBUG_ERROR,"%a: Invalid length of buffer %d\n",
> - __FUNCTION__, Length));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if (Flag == I2C_FLAG_READ) {
> - RetVal = I2cDataRead (I2c->Dev->Resources[0].AddrRangeMin, SlaveAddress,
> - RegAddress, OffsetLength, Buffer, Length);
> - if (RetVal != EFI_SUCCESS) {
> - DEBUG ((DEBUG_ERROR,"%a: I2c read operation failed (error %d)\n",
> - __FUNCTION__, RetVal));
> - return RetVal;
> - }
> - } else if (Flag == I2C_FLAG_WRITE) {
> - RetVal = I2cDataWrite (I2c->Dev->Resources[0].AddrRangeMin, SlaveAddress,
> - RegAddress, OffsetLength, Buffer, Length);
> - if (RetVal != EFI_SUCCESS) {
> - DEBUG ((DEBUG_ERROR,"%a: I2c write operation failed (error %d)\n",
> - __FUNCTION__, RetVal));
> - return RetVal;
> - }
> - } else {
> - DEBUG ((DEBUG_ERROR,"%a: Invalid Flag %d\n", __FUNCTION__, Flag));
> - return EFI_INVALID_PARAMETER;
> - }
> - }
> -
> - return EFI_SUCCESS;
> + return Status;
> }
>
> EFI_STATUS
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc
2020-04-15 12:13 ` [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc lib Pankaj Bansal
@ 2020-04-22 16:51 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-22 16:51 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:25 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> The Soc info being printed can be removed from SOC lib.
> We are in the process of implementing PEI Phase.
> After PEI phase implementation this info would be printed in
> common PEIM based on the information retrieved from PPIs.
> e.g. gArmMpCoreInfoPpiGuid can be used to print cluser and
"cluster" is still misspelled.
I can fix that when committing.
/
Leif
> core info.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
> ---
>
> Notes:
> - remove CpuMaskNext definition
>
> Silicon/NXP/Library/SocLib/NxpChassis.h | 26 +---
> Silicon/NXP/Library/SocLib/Chassis.c | 144 --------------------
> Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 16 +--
> 3 files changed, 2 insertions(+), 184 deletions(-)
>
> diff --git a/Silicon/NXP/Library/SocLib/NxpChassis.h b/Silicon/NXP/Library/SocLib/NxpChassis.h
> index 99f6439d8f35..a11acf71563e 100644
> --- a/Silicon/NXP/Library/SocLib/NxpChassis.h
> +++ b/Silicon/NXP/Library/SocLib/NxpChassis.h
> @@ -1,7 +1,7 @@
> /** @file
> * Header defining the Base addresses, sizes, flags etc for chassis 1
> *
> -* Copyright 2017-2019 NXP
> +* Copyright 2017-2020 NXP
> *
> * SPDX-License-Identifier: BSD-2-Clause-Patent
> *
> @@ -54,14 +54,6 @@ typedef struct {
> UINTN SdhcClk;
> } SOC_CLOCK_INFO;
>
> -/*
> - * Print Soc information
> - */
> -VOID
> -PrintSoc (
> - VOID
> - );
> -
> /*
> * Initialize Clock structure
> */
> @@ -79,22 +71,6 @@ SmmuInit (
> VOID
> );
>
> -/*
> - * Print CPU information
> - */
> -VOID
> -PrintCpuInfo (
> - VOID
> - );
> -
> -/*
> - * Dump RCW (Reset Control Word) on console
> - */
> -VOID
> -PrintRCW (
> - VOID
> - );
> -
> UINT32
> InitiatorType (
> IN UINT32 Cluster,
> diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
> index b8a8118c5e24..adca7b8dd413 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis.c
> @@ -204,79 +204,6 @@ QoriqCoreToType (
> return EFI_NOT_FOUND; /* cannot identify the cluster */
> }
>
> -STATIC
> -UINTN
> -CpuMaskNext (
> - IN UINTN Cpu,
> - IN UINTN Mask
> - )
> -{
> - for (Cpu++; !((1 << Cpu) & Mask); Cpu++);
> -
> - return Cpu;
> -}
> -
> -/*
> - * Print CPU information
> - */
> -VOID
> -PrintCpuInfo (
> - VOID
> - )
> -{
> - SYS_INFO SysInfo;
> - UINTN CoreIndex;
> - UINTN Core;
> - UINT32 Type;
> - UINT32 NumCpus;
> - UINT32 Mask;
> - CHAR8 *CoreName;
> -
> - GetSysInfo (&SysInfo);
> - DEBUG ((DEBUG_INIT, "Clock Configuration:"));
> -
> - NumCpus = CpuNumCores ();
> - Mask = CpuMask ();
> -
> - for (CoreIndex = 0, Core = CpuMaskNext(-1, Mask);
> - CoreIndex < NumCpus;
> - CoreIndex++, Core = CpuMaskNext(Core, Mask))
> - {
> - if (!(CoreIndex % 3)) {
> - DEBUG ((DEBUG_INIT, "\n "));
> - }
> -
> - Type = TP_ITYP_VERSION (QoriqCoreToType (Core));
> - switch (Type) {
> - case TY_ITYP_VERSION_A7:
> - CoreName = "A7";
> - break;
> - case TY_ITYP_VERSION_A53:
> - CoreName = "A53";
> - break;
> - case TY_ITYP_VERSION_A57:
> - CoreName = "A57";
> - break;
> - case TY_ITYP_VERSION_A72:
> - CoreName = "A72";
> - break;
> - default:
> - CoreName = " Unknown Core ";
> - }
> - DEBUG ((DEBUG_INIT, "CPU%d(%a):%-4d MHz ",
> - Core, CoreName, SysInfo.FreqProcessor[Core] / MHZ));
> - }
> -
> - DEBUG ((DEBUG_INIT, "\n Bus: %-4d MHz ", SysInfo.FreqSystemBus / MHZ));
> - DEBUG ((DEBUG_INIT, "DDR: %-4d MT/s", SysInfo.FreqDdrBus / MHZ));
> -
> - if (SysInfo.FreqFman[0] != 0) {
> - DEBUG ((DEBUG_INIT, "\n FMAN: %-4d MHz ", SysInfo.FreqFman[0] / MHZ));
> - }
> -
> - DEBUG ((DEBUG_INIT, "\n"));
> -}
> -
> /*
> * Return system bus frequency
> */
> @@ -307,77 +234,6 @@ GetSdxcFrequency (
> return SocSysInfo.FreqSdhc;
> }
>
> -/*
> - * Print Soc information
> - */
> -VOID
> -PrintSoc (
> - VOID
> - )
> -{
> - CHAR8 Buf[20];
> - CCSR_GUR *GurBase;
> - UINTN Count;
> - //
> - // Svr : System Version Register
> - //
> - UINTN Svr;
> - UINTN Ver;
> -
> - GurBase = (VOID *)PcdGet64 (PcdGutsBaseAddr);
> -
> - Svr = GurRead ((UINTN)&GurBase->Svr);
> - Ver = SVR_SOC_VER (Svr);
> -
> - for (Count = 0; Count < ARRAY_SIZE (mCpuTypeList); Count++) {
> - if ((mCpuTypeList[Count].SocVer & SVR_WO_E) == Ver) {
> - AsciiStrCpyS (Buf, sizeof (Buf), mCpuTypeList[Count].Name);
> -
> - if (IS_E_PROCESSOR (Svr)) {
> - AsciiStrCatS (Buf, sizeof (Buf), "E");
> - }
> - break;
> - }
> - }
> -
> - DEBUG ((DEBUG_INFO, "SoC: %a (0x%x); Rev %d.%d\n",
> - Buf, Svr, SVR_MAJOR (Svr), SVR_MINOR (Svr)));
> -
> - return;
> -}
> -
> -/*
> - * Dump RCW (Reset Control Word) on console
> - */
> -VOID
> -PrintRCW (
> - VOID
> - )
> -{
> - CCSR_GUR *Base;
> - UINTN Count;
> -
> - Base = (VOID *)PcdGet64 (PcdGutsBaseAddr);
> -
> - /*
> - * Display the RCW, so that no one gets confused as to what RCW
> - * we're actually using for this boot.
> - */
> -
> - DEBUG ((DEBUG_INIT, "Reset Configuration Word (RCW):"));
> - for (Count = 0; Count < ARRAY_SIZE (Base->RcwSr); Count++) {
> - UINT32 Rcw = SwapMmioRead32 ((UINTN)&Base->RcwSr[Count]);
> -
> - if ((Count % 4) == 0) {
> - DEBUG ((DEBUG_INIT, "\n %08x:", Count * 4));
> - }
> -
> - DEBUG ((DEBUG_INIT, " %08x", Rcw));
> - }
> -
> - DEBUG ((DEBUG_INIT, "\n"));
> -}
> -
> /*
> * Setup SMMU in bypass mode
> * and also set its pagesize
> diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> index bfb8b8cb339a..687a1d940066 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> @@ -1,7 +1,7 @@
> /** @Soc.c
> SoC specific Library containg functions to initialize various SoC components
>
> - Copyright 2017-2019 NXP
> + Copyright 2017-2020 NXP
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -131,10 +131,6 @@ GetSysInfo (
>
> /**
> Function to initialize SoC specific constructs
> - CPU Info
> - SoC Personality
> - Board Personality
> - RCW prints
> **/
> VOID
> SocInit (
> @@ -147,16 +143,6 @@ SocInit (
> // Early init serial Port to get board information.
> //
> SerialPortInitialize ();
> - DEBUG ((DEBUG_INIT, "\nUEFI firmware (version %s built at %a on %a)\n",
> - (CHAR16*)PcdGetPtr (PcdFirmwareVersionString), __TIME__, __DATE__));
> -
> - PrintCpuInfo ();
> -
> - //
> - // Print Reset control Word
> - //
> - PrintRCW ();
> - PrintSoc ();
>
> return;
> }
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 12/24] Silicon/NXP: Move RAM retrieval from SocLib
2020-04-15 12:13 ` [PATCH edk2-platforms v3 12/24] Silicon/NXP: Move RAM retrieval from SocLib Pankaj Bansal
@ 2020-04-23 9:15 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 9:15 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:30 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> RAM retrieval using SMC commands is common to all Layerscape SOCs.
> Therefore, move it to commom MemoryInit Pei Lib.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - sort headers alphabetically
> - Moved DRAM region retrieval and Total DRAM size retrieval to separate
> functions
> - Fixed MemoryPeim function description
> - Modified check on FoundSystemMem = TRUE to check the RAM region against
> MemoryPeim function input arguments UefiMemoryBase and UefiMemorySize
> - (!DramRegions[Index].Size) => (DramRegions[Index].Size == 0)
> - (FoundSystemMem) => (FoundSystemMem == TRUE)
> - Added explaination for starting for loop from the last DRAM region
>
> Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf | 7 +-
> Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 -
> Silicon/NXP/Include/DramInfo.h | 38 ----
> Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h | 25 +++
> Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c | 196 ++++++++++++++++----
> Silicon/NXP/Library/SocLib/Chassis.c | 67 -------
> 6 files changed, 188 insertions(+), 146 deletions(-)
>
> diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
> index a5bd39415def..ad2371115b17 100644
> --- a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
> +++ b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.inf
> @@ -18,7 +18,6 @@
> [Sources]
> MemoryInitPeiLib.c
>
> -
> [Packages]
> ArmPkg/ArmPkg.dec
> ArmPlatformPkg/ArmPlatformPkg.dec
> @@ -30,6 +29,7 @@
> [LibraryClasses]
> ArmMmuLib
> ArmPlatformLib
> + ArmSmcLib
> DebugLib
> HobLib
> PcdLib
> @@ -40,6 +40,11 @@
> [FeaturePcd]
> gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob
>
> +[FixedPcd]
> + gArmTokenSpaceGuid.PcdFdBaseAddress
> + gArmTokenSpaceGuid.PcdFdSize
> + gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize
> +
> [Pcd]
> gArmTokenSpaceGuid.PcdSystemMemoryBase
> gArmTokenSpaceGuid.PcdSystemMemorySize
> diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> index b7c7fc78cc8f..99d89498e0e2 100644
> --- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> +++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> @@ -20,7 +20,6 @@
> Silicon/NXP/NxpQoriqLs.dec
>
> [LibraryClasses]
> - ArmSmcLib
> BaseLib
> DebugLib
> IoAccessLib
> diff --git a/Silicon/NXP/Include/DramInfo.h b/Silicon/NXP/Include/DramInfo.h
> deleted file mode 100644
> index a934aaeff1f5..000000000000
> --- a/Silicon/NXP/Include/DramInfo.h
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -/** @file
> -* Header defining the structure for Dram Information
> -*
> -* Copyright 2019 NXP
> -*
> -* SPDX-License-Identifier: BSD-2-Clause-Patent
> -*
> -**/
> -
> -#ifndef DRAM_INFO_H_
> -#define DRAM_INFO_H_
> -
> -#include <Uefi/UefiBaseType.h>
> -
> -#define SMC_DRAM_BANK_INFO (0xC200FF12)
> -
> -typedef struct {
> - UINTN BaseAddress;
> - UINTN Size;
> -} DRAM_REGION_INFO;
> -
> -typedef struct {
> - UINT32 NumOfDrams;
> - UINT32 Reserved;
> - DRAM_REGION_INFO DramRegion[3];
> -} DRAM_INFO;
> -
> -EFI_STATUS
> -GetDramBankInfo (
> - IN OUT DRAM_INFO *DramInfo
> - );
> -
> -VOID
> -UpdateDpaaDram (
> - IN OUT DRAM_INFO *DramInfo
> - );
> -
> -#endif /* DRAM_INFO_H_ */
> diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h
> new file mode 100644
> index 000000000000..edbf0ceaf638
> --- /dev/null
> +++ b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.h
> @@ -0,0 +1,25 @@
> +/** @file
> +*
> +* Copyright 2020 NXP
> +*
> +* SPDX-License-Identifier: BSD-2-Clause-Patent
> +*
> +**/
> +
> +#ifndef MEMORY_INIT_PEI_LIB_H_
> +#define MEMORY_INIT_PEI_LIB_H_
> +
> +#include <Uefi.h>
> +
> +// Specifies the Maximum regions onto which DDR memory can be mapped in
> +// a Platform
> +#define MAX_DRAM_REGIONS 3
> +#define SMC_DRAM_BANK_INFO (0xC200FF12)
> +
> +typedef struct {
> + UINTN BaseAddress;
> + UINTN Size;
> +} DRAM_REGION_INFO;
> +
> +#endif // MEMORY_INIT_PEI_LIB_H_
> +
> diff --git a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
> index 3ea773678667..ea3e7d59532e 100644
> --- a/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
> +++ b/Silicon/NXP/Library/MemoryInitPei/MemoryInitPeiLib.c
> @@ -12,13 +12,15 @@
>
> #include <Library/ArmMmuLib.h>
> #include <Library/ArmPlatformLib.h>
> +#include <Library/ArmSmcLib.h>
> #include <Library/BaseMemoryLib.h>
> #include <Library/DebugLib.h>
> #include <Library/HobLib.h>
> #include <Library/MemoryAllocationLib.h>
> #include <Library/PcdLib.h>
>
> -#include <DramInfo.h>
> +#include "MemoryInitPeiLib.h"
> +
>
> VOID
> BuildMemoryTypeInformationHob (
> @@ -44,22 +46,79 @@ InitMmu (
> }
> }
>
> -/*++
> +STATIC
> +UINTN
> +GetDramSize (
> + IN VOID
> + )
> +{
> + ARM_SMC_ARGS ArmSmcArgs;
>
> -Routine Description:
> + ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
> + ArmSmcArgs.Arg1 = -1;
>
> + ArmCallSmc (&ArmSmcArgs);
>
> + if (ArmSmcArgs.Arg0) {
Breaking this up into helper functions has improved readability a lot,
but this one could do with some more clarification. Can we have a
#define with a descriptive name to explain better than
ArmSmcArgs.Arg0 != 0 why we should return 0?
> + return 0;
> + } else {
> + return ArmSmcArgs.Arg1;
> + }
> +}
>
> -Arguments:
> +STATIC
> +EFI_STATUS
> +GetDramRegionsInfo (
> + OUT DRAM_REGION_INFO *DramRegions,
> + IN UINT32 NumRegions
> + )
> +{
> + ARM_SMC_ARGS ArmSmcArgs;
> + UINT32 Index;
> + UINTN RemainingDramSize;
> + UINTN BaseAddress;
> + UINTN Size;
>
> - FileHandle - Handle of the file being invoked.
> - PeiServices - Describes the list of possible PEI Services.
> + RemainingDramSize = GetDramSize ();
> + DEBUG ((DEBUG_INFO, "DRAM Total Size 0x%lx \n", RemainingDramSize));
>
> -Returns:
> + // Ensure Total Dram Size is valid
> + ASSERT (RemainingDramSize != 0);
>
> - Status - EFI_SUCCESS if the boot mode could be set
> + for (Index = 0; (RemainingDramSize != 0) && (Index < NumRegions); Index++) {
Do we *need* to check for RemainingDramSize in the loop condition?
Would it not be better to process all regions and flag an error if
RemainingDramSize == 0 is not reached?
Hmm, right, so NumRegions is really just the size of our data
structure - but how about something like:
for (Index = 0; Index < NumRegions; Index++) {
...
if (RemainingDramSize == 0) {
return EFI_SUCCESS;
}
}
DEBUG ((DEBUG_ERROR, ...
return EFI_BUFFER_TOO_SMALL;
?
> + ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
> + ArmSmcArgs.Arg1 = Index;
>
> ---*/
> + ArmCallSmc (&ArmSmcArgs);
> +
> + BaseAddress = ArmSmcArgs.Arg1;
> + Size = ArmSmcArgs.Arg2;
> + ASSERT (BaseAddress && Size);
> +
> + DramRegions[Index].BaseAddress = BaseAddress;
> + DramRegions[Index].Size = Size;
> + RemainingDramSize -= Size;
> +
> + DEBUG ((DEBUG_INFO, "DRAM Region[%d]: start 0x%lx, size 0x%lx\n",
> + Index, BaseAddress, Size));
> + }
> +
> + // Ensure that all regions have been accounted for
> + ASSERT (RemainingDramSize == 0);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Get the installed RAM information.
> + Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
> +
> + @param[in] UefiMemoryBase Base address of region used by UEFI in
> + permanent memory
> + @param[in] UefiMemorySize Size of the region used by UEFI in permanent memory
> +
> + @return EFI_SUCCESS Successfuly Initialize MMU and Memory HOBs.
> +**/
> EFI_STATUS
> EFIAPI
> MemoryPeim (
> @@ -67,11 +126,16 @@ MemoryPeim (
> IN UINT64 UefiMemorySize
> )
> {
> - ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
> - EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
> - EFI_PEI_HOB_POINTERS NextHob;
> - BOOLEAN Found;
> - DRAM_INFO DramInfo;
> + ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
> + INT32 Index;
> + UINTN BaseAddress;
> + UINTN Size;
> + UINTN Top;
> + DRAM_REGION_INFO DramRegions[MAX_DRAM_REGIONS];
> + EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes;
> + UINTN FdBase;
> + UINTN FdTop;
> + BOOLEAN FoundSystemMem;
>
> // Get Virtual Memory Map from the Platform Library
> ArmPlatformGetVirtualMemoryMap (&MemoryTable);
> @@ -94,40 +158,94 @@ MemoryPeim (
> EFI_RESOURCE_ATTRIBUTE_TESTED
> );
>
> - if (GetDramBankInfo (&DramInfo)) {
> - DEBUG ((DEBUG_ERROR, "Failed to get DRAM information, exiting...\n"));
> - return EFI_UNSUPPORTED;
> - }
> + FoundSystemMem = FALSE;
> + ZeroMem (DramRegions, sizeof (DramRegions));
>
> - while (DramInfo.NumOfDrams--) {
> - //
> - // Check if the resource for the main system memory has been declared
> - //
> - Found = FALSE;
> - NextHob.Raw = GetHobList ();
> - while ((NextHob.Raw = GetNextHob (EFI_HOB_TYPE_RESOURCE_DESCRIPTOR, NextHob.Raw)) != NULL) {
> - if ((NextHob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) &&
> - (DramInfo.DramRegion[DramInfo.NumOfDrams].BaseAddress >= NextHob.ResourceDescriptor->PhysicalStart) &&
> - (NextHob.ResourceDescriptor->PhysicalStart + NextHob.ResourceDescriptor->ResourceLength <=
> - DramInfo.DramRegion[DramInfo.NumOfDrams].BaseAddress + DramInfo.DramRegion[DramInfo.NumOfDrams].Size))
> - {
> - Found = TRUE;
> - break;
> + GetDramRegionsInfo (DramRegions, ARRAY_SIZE (DramRegions));
This call implicitly discards the return code. I don't think that's
necessarily the wrong decision here, but it would be more clear (and
prevent compilers and code analysis tools from objecting) if
explicitly casting it away with (VOID).
> +
> + FdBase = (UINTN)FixedPcdGet64 (PcdFdBaseAddress);
> + FdTop = FdBase + (UINTN)FixedPcdGet32 (PcdFdSize);
> +
> + // Declare memory regios to system
regions
> + // The DRAM region info is sorted based on the RAM address is SOC memory map.
> + // i.e. DramRegions[0] is at lower address, as compared to DramRegions[1].
> + // The goal to start from last region is to find the topmost RAM region that
> + // can contain UEFI DXE region i.e. PcdSystemMemoryUefiRegionSize.
> + // If UEFI were to allocate any reserved or runtime region, it would be
> + // allocated from topmost RAM region.
> + // This ensures that maximum amount of lower RAM (32 bit addresses) are left
> + // for OS to allocate to devices that can only work with 32bit physical
> + // addresses. E.g. legacy devices that need to DMA to 32bit addresses.
Excellent, thanks!
/
Leif
> + for (Index = MAX_DRAM_REGIONS - 1; Index >= 0; Index--) {
> + if (DramRegions[Index].Size == 0) {
> + continue;
> + }
> +
> + BaseAddress = DramRegions[Index].BaseAddress;
> + Top = DramRegions[Index].BaseAddress + DramRegions[Index].Size;
> +
> + // EDK2 does not have the concept of boot firmware copied into DRAM.
> + // To avoid the DXE core to overwrite this area we must create a memory
> + // allocation HOB for the region, but this only works if we split off the
> + // underlying resource descriptor as well.
> + if (FdBase >= BaseAddress && FdTop <= Top) {
> + // Update Size
> + Size = FdBase - BaseAddress;
> + if (Size) {
> + BuildResourceDescriptorHob (
> + EFI_RESOURCE_SYSTEM_MEMORY,
> + ResourceAttributes,
> + BaseAddress,
> + Size
> + );
> }
> - NextHob.Raw = GET_NEXT_HOB (NextHob);
> - }
> -
> - if (!Found) {
> - // Reserved the memory space occupied by the firmware volume
> + // create the System Memory HOB for the firmware
> BuildResourceDescriptorHob (
> EFI_RESOURCE_SYSTEM_MEMORY,
> ResourceAttributes,
> - DramInfo.DramRegion[DramInfo.NumOfDrams].BaseAddress,
> - DramInfo.DramRegion[DramInfo.NumOfDrams].Size
> + FdBase,
> + PcdGet32 (PcdFdSize)
> );
> + // Create the System Memory HOB for the remaining region (top of the FD)s
> + Size = Top - FdTop;
> + if (Size) {
> + BuildResourceDescriptorHob (
> + EFI_RESOURCE_SYSTEM_MEMORY,
> + ResourceAttributes,
> + FdTop,
> + Size
> + );
> + };
> + // Mark the memory covering the Firmware Device as boot services data
> + BuildMemoryAllocationHob (FixedPcdGet64 (PcdFdBaseAddress),
> + FixedPcdGet32 (PcdFdSize),
> + EfiBootServicesData);
> + } else {
> + BuildResourceDescriptorHob (
> + EFI_RESOURCE_SYSTEM_MEMORY,
> + ResourceAttributes,
> + DramRegions[Index].BaseAddress,
> + DramRegions[Index].Size
> + );
> + }
> +
> + if (FoundSystemMem == TRUE) {
> + continue;
> + }
> +
> + Size = DramRegions[Index].Size;
> +
> + if (FdBase >= BaseAddress && FdTop <= Top) {
> + Size -= (UINTN)FixedPcdGet32 (PcdFdSize);
> + }
> +
> + if ((UefiMemoryBase >= BaseAddress) && (Size >= UefiMemorySize)) {
> + FoundSystemMem = TRUE;
> }
> }
>
> + ASSERT (FoundSystemMem == TRUE);
> +
> // Build Memory Allocation Hob
> InitMmu (MemoryTable);
>
> diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
> index 847331a63152..1ef99e8de25f 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis.c
> @@ -22,7 +22,6 @@
> #include <Library/PrintLib.h>
> #include <Library/SerialPortLib.h>
>
> -#include <DramInfo.h>
> #include "NxpChassis.h"
>
> UINT32
> @@ -75,69 +74,3 @@ SmmuInit (
> MmioWrite32 ((UINTN)SMMU_REG_NSCR0, Value);
> }
>
> -UINTN
> -GetDramSize (
> - IN VOID
> - )
> -{
> - ARM_SMC_ARGS ArmSmcArgs;
> -
> - ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
> - ArmSmcArgs.Arg1 = -1;
> -
> - ArmCallSmc (&ArmSmcArgs);
> -
> - if (ArmSmcArgs.Arg0) {
> - return 0;
> - } else {
> - return ArmSmcArgs.Arg1;
> - }
> -}
> -
> -EFI_STATUS
> -GetDramBankInfo (
> - IN OUT DRAM_INFO *DramInfo
> - )
> -{
> - ARM_SMC_ARGS ArmSmcArgs;
> - UINT32 I;
> - UINTN DramSize;
> -
> - DramSize = GetDramSize ();
> - DEBUG ((DEBUG_INFO, "DRAM Total Size 0x%lx \n", DramSize));
> -
> - // Ensure DramSize has been set
> - ASSERT (DramSize != 0);
> -
> - I = 0;
> -
> - do {
> - ArmSmcArgs.Arg0 = SMC_DRAM_BANK_INFO;
> - ArmSmcArgs.Arg1 = I;
> -
> - ArmCallSmc (&ArmSmcArgs);
> - if (ArmSmcArgs.Arg0) {
> - if (I > 0) {
> - break;
> - } else {
> - ASSERT (ArmSmcArgs.Arg0 == 0);
> - }
> - }
> -
> - DramInfo->DramRegion[I].BaseAddress = ArmSmcArgs.Arg1;
> - DramInfo->DramRegion[I].Size = ArmSmcArgs.Arg2;
> -
> - DramSize -= DramInfo->DramRegion[I].Size;
> -
> - DEBUG ((DEBUG_INFO, "bank[%d]: start 0x%lx, size 0x%lx\n",
> - I, DramInfo->DramRegion[I].BaseAddress, DramInfo->DramRegion[I].Size));
> -
> - I++;
> - } while (DramSize);
> -
> - DramInfo->NumOfDrams = I;
> -
> - DEBUG ((DEBUG_INFO, "Number Of DRAM in system %d \n", DramInfo->NumOfDrams));
> -
> - return EFI_SUCCESS;
> -}
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 13/24] Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs
2020-04-15 12:13 ` [PATCH edk2-platforms v3 13/24] Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs Pankaj Bansal
@ 2020-04-23 9:19 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 9:19 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:31 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> The SOC takes primary clocking input from the external signal (a clock
> generator on board). The input (frequency) is multiplied using multiple
> phase locked loops (PLL) to create a variety of frequencies which can
> then be passed to a variety of internal logic, including cores and
> peripheral IP modules.
>
> Therefore, move the clock retrieval APIs to Platform Lib.
> The Input clock is retrieved from board components in Platform Lib, and
> passed on to SOC Lib APIs to get the correct clock for an IP (after PLL
> multiplication).
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
> ---
>
> Notes:
> - sorted NXP_IP_CLOCK enum alphabetically
>
> Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 +
> Silicon/NXP/Include/Library/SocLib.h | 44 ++++++++++++++++
> Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h | 53 ++++++++++++++++++++
> Silicon/NXP/LS1043A/Include/Soc.h | 11 ++++
> Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c | 51 +++++++++++++++++++
> Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 52 +++++++++++++++++++
> 6 files changed, 212 insertions(+)
>
> diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> index 99d89498e0e2..3d38a7e58b91 100644
> --- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> +++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> @@ -17,6 +17,7 @@
> ArmPkg/ArmPkg.dec
> MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + Silicon/NXP/LS1043A/LS1043A.dec
> Silicon/NXP/NxpQoriqLs.dec
>
> [LibraryClasses]
> diff --git a/Silicon/NXP/Include/Library/SocLib.h b/Silicon/NXP/Include/Library/SocLib.h
> new file mode 100644
> index 000000000000..749aa230dec5
> --- /dev/null
> +++ b/Silicon/NXP/Include/Library/SocLib.h
> @@ -0,0 +1,44 @@
> +/** @file
> +
> + Copyright 2020 NXP
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef SOC_LIB_H__
> +#define SOC_LIB_H__
> +
> +#include <Uefi.h>
> +#include <Ppi/NxpPlatformGetClock.h>
> +
> +/**
> + Return the input clock frequency to an IP Module.
> + This function reads the RCW bits and calculates the PLL multipler/divider
> + values to be applied to various IP modules.
> + If a module is disabled or doesn't exist on platform, then return zero.
> +
> + @param[in] BaseClock Base clock to which PLL multipler/divider values is
> + to be applied.
> + @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
> + is to be retrieved.
> + @param[in] Args Variable argument list which is parsed based on
> + ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
> + the second argument will be interpreted as controller
> + number. e.g. if there are four i2c controllers in SOC,
> + then this value can be 0, 1, 2, 3
> + e.g. if ClockType is NXP_CORE_CLOCK, then second
> + argument is interpreted as cluster number and third
> + argument is interpreted as core number (within the
> + cluster)
> +
> + @return Actual Clock Frequency. Return value 0 should be
> + interpreted as clock not being provided to IP.
> +**/
> +UINT64
> +SocGetClock (
> + IN UINT64 BaseClock,
> + IN NXP_IP_CLOCK ClockType,
> + IN VA_LIST Args
> + );
> +
> +#endif // SOC_LIB_H__
> diff --git a/Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h b/Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h
> new file mode 100644
> index 000000000000..bc086bc5b337
> --- /dev/null
> +++ b/Silicon/NXP/Include/Ppi/NxpPlatformGetClock.h
> @@ -0,0 +1,53 @@
> +/** @file
> +*
> +* Copyright 2020 NXP
> +*
> +* SPDX-License-Identifier: BSD-2-Clause-Patent
> +*
> +**/
> +
> +#ifndef NXP_PLATFORM_PPI_H__
> +#define NXP_PLATFORM_PPI_H__
> +
> +#include <Uefi.h>
> +
> +typedef enum _NXP_IP_CLOCK {
> + NXP_CORE_CLOCK,
> + NXP_I2C_CLOCK,
> + NXP_SYSTEM_CLOCK,
> + NXP_UART_CLOCK
> +} NXP_IP_CLOCK;
> +
> +/**
> + Get the clocks supplied by Platform(Board) to NXP Layerscape SOC IPs
> +
> + @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
> + is to be retrieved.
> + @param[in] ... Variable argument list which is parsed based on
> + ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
> + the second argument will be interpreted as controller
> + number. e.g. if there are four i2c controllers in SOC,
> + then this value can be 0, 1, 2, 3
> + e.g. if ClockType is NXP_CORE_CLOCK, then second
> + argument is interpreted as cluster number and third
> + argument is interpreted as core number (within the
> + cluster)
> +
> + @return Actual Clock Frequency. Return value 0 should be
> + interpreted as clock not being provided to IP.
> +**/
> +typedef
> +UINT64
> +(EFIAPI * NXP_PLATFORM_GET_CLOCK)(
> + IN NXP_IP_CLOCK ClockType,
> + ...
> + );
> +
> +typedef struct {
> + NXP_PLATFORM_GET_CLOCK PlatformGetClock;
> +} NXP_PLATFORM_GET_CLOCK_PPI;
> +
> +extern NXP_PLATFORM_GET_CLOCK_PPI gPlatformGetClockPpi;
> +
> +#endif // NXP_PLATFORM_PPI_H__
> +
> diff --git a/Silicon/NXP/LS1043A/Include/Soc.h b/Silicon/NXP/LS1043A/Include/Soc.h
> index 441871757d67..e62de570da8a 100644
> --- a/Silicon/NXP/LS1043A/Include/Soc.h
> +++ b/Silicon/NXP/LS1043A/Include/Soc.h
> @@ -8,6 +8,8 @@
> #ifndef SOC_H__
> #define SOC_H__
>
> +#include <Chassis2/NxpSoc.h>
> +
> /**
> Soc Memory Map
> **/
> @@ -41,4 +43,13 @@
> #define LS1043A_I2C_SIZE 0x10000
> #define LS1043A_I2C_NUM_CONTROLLERS 4
>
> +#define LS1043A_DCFG_ADDRESS CHASSIS2_DCFG_ADDRESS
> +
> +/**
> + Reset Control Word (RCW) Bits
> +**/
> +#define SYS_PLL_RAT(x) (((x) & 0x7c) >> 2) // Bits 2-6
> +
> +typedef CCSR_GUR LS1043A_DEVICE_CONFIG;
> +
> #endif // SOC_H__
> diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
> index 718c71bf02eb..7f5872a78cfc 100644
> --- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
> +++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
> @@ -12,10 +12,60 @@
> **/
>
> #include <Library/ArmPlatformLib.h>
> +#include <Library/SocLib.h>
> #include <Ppi/ArmMpCoreInfo.h>
> +#include <Ppi/NxpPlatformGetClock.h>
>
> extern VOID SocInit (VOID);
>
> +/**
> + Get the clocks supplied by Platform(Board) to NXP Layerscape SOC IPs
> +
> + @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
> + is to be retrieved.
> + @param[in] ... Variable argument list which is parsed based on
> + ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
> + the second argument will be interpreted as controller
> + number.
> + if ClockType is NXP_CORE_CLOCK, then second argument
> + is interpreted as cluster number and third argument is
> + interpreted as core number (within the cluster)
> +
> + @return Actual Clock Frequency. Return value 0 should be
> + interpreted as clock not being provided to IP.
> +**/
> +UINT64
> +EFIAPI
> +NxpPlatformGetClock(
> + IN UINT32 ClockType,
> + ...
> + )
> +{
> + UINT64 Clock;
> + VA_LIST Args;
> +
> + Clock = 0;
> +
> + VA_START (Args, ClockType);
> +
> + switch (ClockType) {
> + case NXP_SYSTEM_CLOCK:
> + Clock = 100 * 1000 * 1000; // 100 MHz
> + break;
> + case NXP_I2C_CLOCK:
> + case NXP_UART_CLOCK:
> + Clock = NxpPlatformGetClock (NXP_SYSTEM_CLOCK);
> + Clock = SocGetClock (Clock, ClockType, Args);
> + break;
> + default:
> + break;
> + }
> +
> + VA_END (Args);
> +
> + return Clock;
> +}
> +
> /**
> Return the current Boot Mode
>
> @@ -69,6 +119,7 @@ PrePeiCoreGetMpCoreInfo (
> }
>
> ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
> +NXP_PLATFORM_GET_CLOCK_PPI gPlatformGetClockPpi = { NxpPlatformGetClock };
>
> EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
> {
> diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> index 98ca2e162f7b..480d8d18fb9f 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> @@ -18,6 +18,8 @@
> #include <Library/PcdLib.h>
> #include <Library/PrintLib.h>
> #include <Library/SerialPortLib.h>
> +#include <Library/SocLib.h>
> +#include <Soc.h>
>
> /**
> Calculate the frequency of various controllers and
> @@ -50,6 +52,56 @@ GetSysInfo (
> CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
> }
>
> +/**
> + Return the input clock frequency to an IP Module.
> + This function reads the RCW bits and calculates the PLL multipler/divider
> + values to be applied to various IP modules.
> + If a module is disabled or doesn't exist on platform, then return zero.
> +
> + @param[in] BaseClock Base clock to which PLL multipler/divider values is
> + to be applied.
> + @param[in] ClockType Variable of Type NXP_IP_CLOCK. Indicates which IP clock
> + is to be retrieved.
> + @param[in] Args Variable argument list which is parsed based on
> + ClockType. e.g. if the ClockType is NXP_I2C_CLOCK, then
> + the second argument will be interpreted as controller
> + number. e.g. if there are four i2c controllers in SOC,
> + then this value can be 0, 1, 2, 3
> + e.g. if ClockType is NXP_CORE_CLOCK, then second
> + argument is interpreted as cluster number and third
> + argument is interpreted as core number (within the
> + cluster)
> +
> + @return Actual Clock Frequency. Return value 0 should be
> + interpreted as clock not being provided to IP.
> +**/
> +UINT64
> +SocGetClock (
> + IN UINT64 BaseClock,
> + IN NXP_IP_CLOCK ClockType,
> + IN VA_LIST Args
> + )
> +{
> + LS1043A_DEVICE_CONFIG *Dcfg;
> + UINT32 RcwSr;
> + UINT64 ReturnValue;
> +
> + ReturnValue = 0;
> + Dcfg = (LS1043A_DEVICE_CONFIG *)LS1043A_DCFG_ADDRESS;
> +
> + switch (ClockType) {
> + case NXP_UART_CLOCK:
> + case NXP_I2C_CLOCK:
> + RcwSr = GurRead ((UINTN)&Dcfg->RcwSr[0]);
> + ReturnValue = BaseClock * SYS_PLL_RAT (RcwSr);
> + break;
> + default:
> + break;
> + }
> +
> + return ReturnValue;
> +}
> +
> /**
> Function to initialize SoC specific constructs
> **/
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 14/24] Silicon/NXP: Use Clock retrieval PPI in modules
2020-04-15 12:13 ` [PATCH edk2-platforms v3 14/24] Silicon/NXP: Use Clock retrieval PPI in modules Pankaj Bansal
@ 2020-04-23 9:25 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 9:25 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:32 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> Use NXP_PLATFORM_GET_CLOCK_PPI in various Layerscape IP modules.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - Added clock retrieval APIs to DUartPortLib
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
>
> Silicon/NXP/NxpQoriqLs.dec | 5 ----
> Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 2 --
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf | 2 +-
> Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf | 5 ++--
> Silicon/NXP/Library/SocLib/LS1043aSocLib.inf | 1 -
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.h | 6 ----
> Silicon/NXP/Include/Chassis2/NxpSoc.h | 9 ------
> Silicon/NXP/Library/DUartPortLib/DUart.h | 8 +----
> Silicon/NXP/Drivers/I2cDxe/I2cDxe.c | 3 +-
> Silicon/NXP/Library/DUartPortLib/DUartPortLib.c | 7 ++---
> Silicon/NXP/Library/SocLib/Chassis.c | 15 ----------
> Silicon/NXP/Library/SocLib/Chassis2/Soc.c | 31 --------------------
> 12 files changed, 9 insertions(+), 85 deletions(-)
>
> diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
> index b478560450b3..2ac047a89274 100644
> --- a/Silicon/NXP/NxpQoriqLs.dec
> +++ b/Silicon/NXP/NxpQoriqLs.dec
> @@ -22,11 +22,6 @@
> gNxpNonDiscoverableI2cMasterGuid = { 0x5f2c099c, 0x54a3, 0x4dd4, {0x9e, 0xc5, 0xe9, 0x12, 0x8c, 0x36, 0x81, 0x6a}}
>
> [PcdsFixedAtBuild.common]
> - #
> - # Platform PCDs
> - #
> - gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x0|UINT32|0x00000250
> -
> #
> # Pcds to support Big Endian IPs
> #
> diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
> index e5383aaf0cc5..d486c9b36fab 100644
> --- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
> +++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
> @@ -39,8 +39,6 @@
> gArmTokenSpaceGuid.PcdSystemMemorySize|0x7BE00000
> gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
>
> - gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv|0x1
> -
> #
> # RTC Pcds
> #
> diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
> index 867376044656..3bf7a8124fc6 100644
> --- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
> +++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
> @@ -25,13 +25,13 @@
>
> [LibraryClasses]
> ArmLib
> + ArmPlatformLib
> BaseMemoryLib
> DevicePathLib
> I2cLib
> IoLib
> MemoryAllocationLib
> PcdLib
> - SocLib
> TimerLib
> UefiBootServicesTableLib
> UefiDriverEntryPoint
> diff --git a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
> index 7a2fa619b027..b8a77ae05243 100644
> --- a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
> +++ b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.inf
> @@ -3,7 +3,7 @@
> # Component description file for DUartPortLib module
> #
> # Copyright (c) 2013, Freescale Ltd. All rights reserved.
> -# Copyright 2017 NXP
> +# Copyright 2017, 2020 NXP
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -20,8 +20,8 @@
> DUartPortLib.c
>
> [LibraryClasses]
> + ArmPlatformLib
> PcdLib
> - SocLib
>
> [Packages]
> MdeModulePkg/MdeModulePkg.dec
> @@ -31,4 +31,3 @@
> [Pcd]
> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
> gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
> - gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
> diff --git a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> index 3d38a7e58b91..bb15e0a3d710 100644
> --- a/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> +++ b/Silicon/NXP/Library/SocLib/LS1043aSocLib.inf
> @@ -36,4 +36,3 @@
> [FixedPcd]
> gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
> gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian
> - gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
> diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
> index 88316f313380..7c4a306c16a0 100644
> --- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
> +++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
> @@ -37,12 +37,6 @@ typedef struct {
> NON_DISCOVERABLE_DEVICE *Dev;
> } NXP_I2C_MASTER;
>
> -extern
> -UINT64
> -GetBusFrequency (
> - VOID
> - );
> -
> EFI_STATUS
> NxpI2cInit (
> IN EFI_HANDLE DriverBindingHandle,
> diff --git a/Silicon/NXP/Include/Chassis2/NxpSoc.h b/Silicon/NXP/Include/Chassis2/NxpSoc.h
> index 6812beafe447..3f00a2614131 100644
> --- a/Silicon/NXP/Include/Chassis2/NxpSoc.h
> +++ b/Silicon/NXP/Include/Chassis2/NxpSoc.h
> @@ -27,10 +27,6 @@
> #define SACR_PAGESIZE_MASK 0x00010000
> #define IDR1_PAGESIZE_MASK 0x80000000
>
> -typedef struct {
> - UINTN FreqSystemBus;
> -} SYS_INFO;
> -
> /* Device Configuration and Pin Control */
> typedef struct {
> UINT8 Res0[0x100-0x00];
> @@ -39,11 +35,6 @@ typedef struct {
> #define CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
> } CCSR_GUR;
>
> -VOID
> -GetSysInfo (
> - OUT SYS_INFO *
> - );
> -
> UINT32
> EFIAPI
> GurRead (
> diff --git a/Silicon/NXP/Library/DUartPortLib/DUart.h b/Silicon/NXP/Library/DUartPortLib/DUart.h
> index c71e2ce55d1d..aca7cd8d3f01 100644
> --- a/Silicon/NXP/Library/DUartPortLib/DUart.h
> +++ b/Silicon/NXP/Library/DUartPortLib/DUart.h
> @@ -5,7 +5,7 @@
> *
> * Copyright (c) 2011-2012, ARM Limited. All rights reserved.
> * Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
> -* Copyright 2017 NXP
> +* Copyright 2017, 2020 NXP
> *
> * SPDX-License-Identifier: BSD-2-Clause-Patent
> *
> @@ -113,10 +113,4 @@
> #define USCR 0x7
> #define UDSR 0x10
>
> -extern
> -UINT64
> -GetBusFrequency (
> - VOID
> - );
> -
> #endif /* DUART_H_ */
> diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
> index a5aba47b3ed4..30804450d2b7 100644
> --- a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
> +++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
> @@ -17,6 +17,7 @@
> #include <Library/UefiBootServicesTableLib.h>
> #include <Library/UefiLib.h>
> #include <Library/UefiRuntimeLib.h>
> +#include <Ppi/NxpPlatformGetClock.h>
>
> #include "I2cDxe.h"
>
> @@ -51,7 +52,7 @@ SetBusFrequency (
>
> I2cBase = (UINTN)(I2c->Dev->Resources[0].AddrRangeMin);
>
> - I2cClock = GetBusFrequency ();
> + I2cClock = gPlatformGetClockPpi.PlatformGetClock (NXP_I2C_CLOCK, 0);
>
> I2cInitialize (I2cBase, I2cClock, *BusClockHertz);
>
> diff --git a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c
> index c3c738d3cca8..f9c2c44a4c3b 100644
> --- a/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c
> +++ b/Silicon/NXP/Library/DUartPortLib/DUartPortLib.c
> @@ -6,7 +6,7 @@
> Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
> Copyright (c) 2012 - 2013, ARM Ltd. All rights reserved.<BR>
> Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
> - Copyright 2017 NXP
> + Copyright 2017, 2020 NXP
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -16,6 +16,7 @@
> #include <Library/IoLib.h>
> #include <Library/PcdLib.h>
> #include <Library/SerialPortLib.h>
> +#include <Ppi/NxpPlatformGetClock.h>
>
> #include "DUart.h"
>
> @@ -169,10 +170,8 @@ CalculateBaudDivisor (
> )
> {
> UINTN DUartClk;
> - UINTN FreqSystemBus;
>
> - FreqSystemBus = GetBusFrequency ();
> - DUartClk = FreqSystemBus/PcdGet32(PcdPlatformFreqDiv);
> + DUartClk = gPlatformGetClockPpi.PlatformGetClock (NXP_UART_CLOCK, 0);
>
> return ((DUartClk)/(BaudRate * 16));
> }
> diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
> index 1ef99e8de25f..90677f0f36ca 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis.c
> @@ -37,21 +37,6 @@ GurRead (
> }
> }
>
> -/*
> - * Return system bus frequency
> - */
> -UINT64
> -GetBusFrequency (
> - VOID
> - )
> -{
> - SYS_INFO SocSysInfo;
> -
> - GetSysInfo (&SocSysInfo);
> -
> - return SocSysInfo.FreqSystemBus;
> -}
> -
> /*
> * Setup SMMU in bypass mode
> * and also set its pagesize
> diff --git a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> index 480d8d18fb9f..b14ada7f595d 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis2/Soc.c
> @@ -21,37 +21,6 @@
> #include <Library/SocLib.h>
> #include <Soc.h>
>
> -/**
> - Calculate the frequency of various controllers and
> - populate the passed structure with frequuencies.
> -
> - @param PtrSysInfo Input structure to populate with
> - frequencies.
> -**/
> -VOID
> -GetSysInfo (
> - OUT SYS_INFO *PtrSysInfo
> - )
> -{
> - CCSR_GUR *GurBase;
> - UINTN SysClk;
> -
> - GurBase = (CCSR_GUR *)CHASSIS2_DCFG_ADDRESS;
> - SysClk = CLK_FREQ;
> -
> - SetMem (PtrSysInfo, sizeof (SYS_INFO), 0);
> -
> - PtrSysInfo->FreqSystemBus = SysClk;
> -
> - //
> - // selects the platform clock:SYSCLK ratio and calculate
> - // system frequency
> - //
> - PtrSysInfo->FreqSystemBus *= (GurRead ((UINTN)&GurBase->RcwSr[0]) >>
> - CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
> - CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
> -}
> -
> /**
> Return the input clock frequency to an IP Module.
> This function reads the RCW bits and calculates the PLL multipler/divider
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs
2020-04-15 12:13 ` [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs Pankaj Bansal
@ 2020-04-23 9:27 ` Leif Lindholm
2020-04-23 10:11 ` Leif Lindholm
1 sibling, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 9:27 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:33 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> The SwapMmio** APIs are supposed to be called indirectly via
> GetMmioOperations** APIs.
> Therefore, remove the SwapMmio** APIs from IoAccessLib.h and make
> these APIs STATIC to IoAccessLib.c, so that no accidental call can
> be made to these.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - New commit
Thanks!
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
>
> Silicon/NXP/Include/Library/IoAccessLib.h | 236 +-------------------
> Silicon/NXP/Library/IoAccessLib/IoAccessLib.c | 17 +-
> Silicon/NXP/Library/SocLib/Chassis.c | 10 +-
> 3 files changed, 22 insertions(+), 241 deletions(-)
>
> diff --git a/Silicon/NXP/Include/Library/IoAccessLib.h b/Silicon/NXP/Include/Library/IoAccessLib.h
> index 0b708d544fa7..7b490744382c 100644
> --- a/Silicon/NXP/Include/Library/IoAccessLib.h
> +++ b/Silicon/NXP/Include/Library/IoAccessLib.h
> @@ -1,6 +1,6 @@
> /** @file
> *
> - * Copyright 2017-2019 NXP
> + * Copyright 2017-2020 NXP
> *
> * SPDX-License-Identifier: BSD-2-Clause-Patent
> *
> @@ -89,238 +89,4 @@ GetMmioOperations64 (
> IN BOOLEAN Swap
> );
>
> -/**
> - MmioRead16 for Big-Endian modules.
> -
> - @param Address The MMIO register to read.
> -
> - @return The value read.
> -
> -**/
> -UINT16
> -EFIAPI
> -SwapMmioRead16 (
> - IN UINTN Address
> - );
> -
> -/**
> - MmioRead32 for Big-Endian modules.
> -
> - @param Address The MMIO register to read.
> -
> - @return The value read.
> -
> -**/
> -UINT32
> -EFIAPI
> -SwapMmioRead32 (
> - IN UINTN Address
> - );
> -
> -/**
> - MmioRead64 for Big-Endian modules.
> -
> - @param Address The MMIO register to read.
> -
> - @return The value read.
> -
> -**/
> -UINT64
> -EFIAPI
> -SwapMmioRead64 (
> - IN UINTN Address
> - );
> -
> -/**
> - MmioWrite16 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param Value The value to write to the MMIO register.
> -
> -**/
> -UINT16
> -EFIAPI
> -SwapMmioWrite16 (
> - IN UINTN Address,
> - IN UINT16 Value
> - );
> -
> -/**
> - MmioWrite32 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param Value The value to write to the MMIO register.
> -
> -**/
> -UINT32
> -EFIAPI
> -SwapMmioWrite32 (
> - IN UINTN Address,
> - IN UINT32 Value
> - );
> -
> -/**
> - MmioWrite64 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param Value The value to write to the MMIO register.
> -
> -**/
> -UINT64
> -EFIAPI
> -SwapMmioWrite64 (
> - IN UINTN Address,
> - IN UINT64 Value
> - );
> -
> -/**
> - MmioAndThenOr16 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param AndData The value to AND with the read value from the MMIO register.
> - @param OrData The value to OR with the result of the AND operation.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT16
> -EFIAPI
> -SwapMmioAndThenOr16 (
> - IN UINTN Address,
> - IN UINT16 AndData,
> - IN UINT16 OrData
> - );
> -
> -/**
> - MmioAndThenOr32 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param AndData The value to AND with the read value from the MMIO register.
> - @param OrData The value to OR with the result of the AND operation.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT32
> -EFIAPI
> -SwapMmioAndThenOr32 (
> - IN UINTN Address,
> - IN UINT32 AndData,
> - IN UINT32 OrData
> - );
> -
> -/**
> - MmioAndThenOr64 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param AndData The value to AND with the read value from the MMIO register.
> - @param OrData The value to OR with the result of the AND operation.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT64
> -EFIAPI
> -SwapMmioAndThenOr64 (
> - IN UINTN Address,
> - IN UINT64 AndData,
> - IN UINT64 OrData
> - );
> -
> -/**
> - MmioOr16 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param OrData The value to OR with the read value from the MMIO register.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT16
> -EFIAPI
> -SwapMmioOr16 (
> - IN UINTN Address,
> - IN UINT16 OrData
> - );
> -
> -/**
> - MmioOr32 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param OrData The value to OR with the read value from the MMIO register.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT32
> -EFIAPI
> -SwapMmioOr32 (
> - IN UINTN Address,
> - IN UINT32 OrData
> - );
> -
> -/**
> - MmioOr64 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param OrData The value to OR with the read value from the MMIO register.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT64
> -EFIAPI
> -SwapMmioOr64 (
> - IN UINTN Address,
> - IN UINT64 OrData
> - );
> -
> -/**
> - MmioAnd16 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param AndData The value to AND with the read value from the MMIO register.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT16
> -EFIAPI
> -SwapMmioAnd16 (
> - IN UINTN Address,
> - IN UINT16 AndData
> - );
> -
> -/**
> - MmioAnd32 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param AndData The value to AND with the read value from the MMIO register.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT32
> -EFIAPI
> -SwapMmioAnd32 (
> - IN UINTN Address,
> - IN UINT32 AndData
> - );
> -
> -/**
> - MmioAnd64 for Big-Endian modules.
> -
> - @param Address The MMIO register to write.
> - @param AndData The value to AND with the read value from the MMIO register.
> -
> - @return The value written back to the MMIO register.
> -
> -**/
> -UINT64
> -EFIAPI
> -SwapMmioAnd64 (
> - IN UINTN Address,
> - IN UINT64 AndData
> - );
> -
> #endif /* IO_ACCESS_LIB_H_ */
> diff --git a/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c b/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c
> index 6ed83d019a6e..bb4a93b6f09a 100644
> --- a/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c
> +++ b/Silicon/NXP/Library/IoAccessLib/IoAccessLib.c
> @@ -2,7 +2,7 @@
>
> Provide MMIO APIs for BE modules.
>
> - Copyright 2017-2019 NXP
> + Copyright 2017-2020 NXP
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -21,6 +21,7 @@
> @return The value read.
>
> **/
> +STATIC
> UINT16
> EFIAPI
> SwapMmioRead16 (
> @@ -38,6 +39,7 @@ SwapMmioRead16 (
> @return The value read.
>
> **/
> +STATIC
> UINT32
> EFIAPI
> SwapMmioRead32 (
> @@ -55,6 +57,7 @@ SwapMmioRead32 (
> @return The value read.
>
> **/
> +STATIC
> UINT64
> EFIAPI
> SwapMmioRead64 (
> @@ -71,6 +74,7 @@ SwapMmioRead64 (
> @param Value The value to write to the MMIO register.
>
> **/
> +STATIC
> UINT16
> EFIAPI
> SwapMmioWrite16 (
> @@ -88,6 +92,7 @@ SwapMmioWrite16 (
> @param Value The value to write to the MMIO register.
>
> **/
> +STATIC
> UINT32
> EFIAPI
> SwapMmioWrite32 (
> @@ -105,6 +110,7 @@ SwapMmioWrite32 (
> @param Value The value to write to the MMIO register.
>
> **/
> +STATIC
> UINT64
> EFIAPI
> SwapMmioWrite64 (
> @@ -125,6 +131,7 @@ SwapMmioWrite64 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT16
> EFIAPI
> SwapMmioAndThenOr16 (
> @@ -149,6 +156,7 @@ SwapMmioAndThenOr16 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT32
> EFIAPI
> SwapMmioAndThenOr32 (
> @@ -173,6 +181,7 @@ SwapMmioAndThenOr32 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT64
> EFIAPI
> SwapMmioAndThenOr64 (
> @@ -196,6 +205,7 @@ SwapMmioAndThenOr64 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT16
> EFIAPI
> SwapMmioOr16 (
> @@ -215,6 +225,7 @@ SwapMmioOr16 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT32
> EFIAPI
> SwapMmioOr32 (
> @@ -234,6 +245,7 @@ SwapMmioOr32 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT64
> EFIAPI
> SwapMmioOr64 (
> @@ -253,6 +265,7 @@ SwapMmioOr64 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT16
> EFIAPI
> SwapMmioAnd16 (
> @@ -272,6 +285,7 @@ SwapMmioAnd16 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT32
> EFIAPI
> SwapMmioAnd32 (
> @@ -291,6 +305,7 @@ SwapMmioAnd32 (
> @return The value written back to the MMIO register.
>
> **/
> +STATIC
> UINT64
> EFIAPI
> SwapMmioAnd64 (
> diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
> index 90677f0f36ca..d7bc55c9d275 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis.c
> @@ -30,11 +30,11 @@ GurRead (
> IN UINTN Address
> )
> {
> - if (FixedPcdGetBool (PcdGurBigEndian)) {
> - return SwapMmioRead32 (Address);
> - } else {
> - return MmioRead32 (Address);
> - }
> + MMIO_OPERATIONS_32 *GurOps;
> +
> + GurOps = GetMmioOperations32 (FixedPcdGetBool (PcdGurBigEndian));
> +
> + return GurOps->Read32 (Address);
> }
>
> /*
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs
2020-04-15 12:13 ` [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs Pankaj Bansal
2020-04-23 9:27 ` Leif Lindholm
@ 2020-04-23 10:11 ` Leif Lindholm
1 sibling, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 10:11 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
Actually...
On Wed, Apr 15, 2020 at 17:43:33 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> The SwapMmio** APIs are supposed to be called indirectly via
> GetMmioOperations** APIs.
> Therefore, remove the SwapMmio** APIs from IoAccessLib.h and make
> these APIs STATIC to IoAccessLib.c, so that no accidental call can
> be made to these.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - New commit
>
> Silicon/NXP/Include/Library/IoAccessLib.h | 236 +-------------------
> Silicon/NXP/Library/IoAccessLib/IoAccessLib.c | 17 +-
> Silicon/NXP/Library/SocLib/Chassis.c | 10 +-
> 3 files changed, 22 insertions(+), 241 deletions(-)
>
> diff --git a/Silicon/NXP/Library/SocLib/Chassis.c b/Silicon/NXP/Library/SocLib/Chassis.c
> index 90677f0f36ca..d7bc55c9d275 100644
> --- a/Silicon/NXP/Library/SocLib/Chassis.c
> +++ b/Silicon/NXP/Library/SocLib/Chassis.c
> @@ -30,11 +30,11 @@ GurRead (
> IN UINTN Address
> )
> {
> - if (FixedPcdGetBool (PcdGurBigEndian)) {
> - return SwapMmioRead32 (Address);
> - } else {
> - return MmioRead32 (Address);
> - }
> + MMIO_OPERATIONS_32 *GurOps;
> +
> + GurOps = GetMmioOperations32 (FixedPcdGetBool (PcdGurBigEndian));
> +
> + return GurOps->Read32 (Address);
This bit didn't jump out at me, but when I looked at 16/24 I nearly
choked on my coffee.
When the IoAccessLib was being reviewed, I requested that the
16/32/64-bit accessors be merged
(https://edk2.groups.io/g/devel/message/34403). They ended up not
being, and I didn't notice so pushed the result anyway.
I have sent out a patch for review/test to do this, but it will need
to go in before this patch - and it *will* require changes to this
one:
MMIO_OPERATIONS_32 -> MMIO_OPERATIONS
GetMmioOperations32 -> GetMmioOperations
If those changes are done, there is no need for me to re-review this
one.
Regards,
Leif
> }
>
> /*
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-15 12:13 ` [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package Pankaj Bansal
@ 2020-04-23 10:27 ` Leif Lindholm
2020-04-23 11:38 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 10:27 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:34 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> A Chassis is a base framework used for building SoCs.
> We can think of Chassis/Soc/Platform(a.k.a Borad) in Object model terms.
> Chassis is base. Soc is based on some Chassis.
> Platform is based on some Soc.
>
> SOCs that are designed around same chassis, reuse most of the components.
>
> Therefore, add the package for Chassis2. LS1043A and LS1046A SOCs belong
> to Chassis2.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - in patch description Oops -> Object model
> - Sorted includes alphabetically
> - removed direct calls to SwapMmio** APIs and used GetMmioOperations**
>
> Silicon/NXP/Chassis2/Chassis2.dec | 23 +++++
> Silicon/NXP/NxpQoriqLs.dec | 4 +
> Silicon/NXP/Chassis2/Chassis2.dsc.inc | 10 ++
> Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf | 34 +++++++
> Silicon/NXP/Chassis2/Include/Chassis.h | 34 +++++++
> Silicon/NXP/Include/Library/ChassisLib.h | 51 ++++++++++
> Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c | 97 ++++++++++++++++++++
> 7 files changed, 253 insertions(+)
>
> diff --git a/Silicon/NXP/Chassis2/Chassis2.dec b/Silicon/NXP/Chassis2/Chassis2.dec
> new file mode 100644
> index 000000000000..a0048bd784ea
> --- /dev/null
> +++ b/Silicon/NXP/Chassis2/Chassis2.dec
> @@ -0,0 +1,23 @@
> +# @file
> +# NXP Layerscape processor package.
> +#
> +# Copyright 2020 NXP
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#
> +
> +[Defines]
> + DEC_SPECIFICATION = 1.27
> + PACKAGE_VERSION = 0.1
> +
> +################################################################################
> +#
> +# Include Section - list of Include Paths that are provided by this package.
> +# Comments are used for Keywords and Module Types.
> +#
> +#
> +################################################################################
> +[Includes.common]
> + Include # Root include for the package
> +
> diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
> index 2ac047a89274..3e79f502c127 100644
> --- a/Silicon/NXP/NxpQoriqLs.dec
> +++ b/Silicon/NXP/NxpQoriqLs.dec
> @@ -14,6 +14,9 @@
> Include
>
> [LibraryClasses]
> + ## @libraryclass Provides Chassis specific functions to other modules
> + ChassisLib|Include/Library/ChassisLib.h
> +
> ## @libraryclass Provides services to read/write to I2c devices
> I2cLib|Include/Library/I2cLib.h
>
> @@ -29,4 +32,5 @@
>
> [PcdsFeatureFlag]
> gNxpQoriqLsTokenSpaceGuid.PcdI2cErratumA009203|FALSE|BOOLEAN|0x00000315
> + gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian|FALSE|BOOLEAN|0x00000316
>
> diff --git a/Silicon/NXP/Chassis2/Chassis2.dsc.inc b/Silicon/NXP/Chassis2/Chassis2.dsc.inc
> new file mode 100644
> index 000000000000..db8e5a92eacb
> --- /dev/null
> +++ b/Silicon/NXP/Chassis2/Chassis2.dsc.inc
> @@ -0,0 +1,10 @@
> +# @file
> +#
> +# Copyright 2020 NXP
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#
> +
> +[LibraryClasses.common]
> + ChassisLib|Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
> diff --git a/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
> new file mode 100644
> index 000000000000..2bb16af53134
> --- /dev/null
> +++ b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.inf
> @@ -0,0 +1,34 @@
> +# @file
> +#
> +# Copyright 2020 NXP
> +#
> +# SPDX-License-Identifier: BSD-2-Clause
> +#
> +#
> +
> +[Defines]
> + INF_VERSION = 1.27
> + BASE_NAME = Chassis2Lib
> + FILE_GUID = fae0d077-5fc2-494f-b8e1-c51a3023ee3e
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = ChassisLib
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + MdePkg/MdePkg.dec
> + Silicon/NXP/Chassis2/Chassis2.dec
> + Silicon/NXP/NxpQoriqLs.dec
> +
> +[LibraryClasses]
> + IoAccessLib
> + IoLib
> + PcdLib
> + SerialPortLib
> +
> +[Sources.common]
> + ChassisLib.c
> +
> +[FeaturePcd]
> + gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian
> +
> diff --git a/Silicon/NXP/Chassis2/Include/Chassis.h b/Silicon/NXP/Chassis2/Include/Chassis.h
> new file mode 100644
> index 000000000000..72bd97efd004
> --- /dev/null
> +++ b/Silicon/NXP/Chassis2/Include/Chassis.h
> @@ -0,0 +1,34 @@
> +/** @file
> +
> + Copyright 2020 NXP
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +#ifndef CHASSIS_H__
> +#define CHASSIS_H__
> +
> +#define NXP_LAYERSCAPE_CHASSIS2_DCFG_ADDRESS 0x1EE0000
> +
> +/* SMMU Defintions */
> +#define SMMU_BASE_ADDR 0x09000000
> +#define SMMU_REG_SCR0 (SMMU_BASE_ADDR + 0x0)
> +#define SMMU_REG_SACR (SMMU_BASE_ADDR + 0x10)
> +#define SMMU_REG_NSCR0 (SMMU_BASE_ADDR + 0x400)
> +
> +#define SCR0_USFCFG_MASK 0x00000400
> +#define SCR0_CLIENTPD_MASK 0x00000001
> +#define SACR_PAGESIZE_MASK 0x00010000
> +
> +/**
> + The Device Configuration Unit provides general purpose configuration and
> + status for the device. These registers only support 32-bit accesses.
> +**/
> +#pragma pack(1)
> +typedef struct {
> + UINT8 Reserved0[0x100 - 0x0];
> + UINT32 RcwSr[16]; // Reset Control Word Status Register
> +} NXP_LAYERSCAPE_CHASSIS2_DEVICE_CONFIG;
> +#pragma pack()
> +
> +#endif // CHASSIS_H__
> diff --git a/Silicon/NXP/Include/Library/ChassisLib.h b/Silicon/NXP/Include/Library/ChassisLib.h
> new file mode 100644
> index 000000000000..89992a4b6fd5
> --- /dev/null
> +++ b/Silicon/NXP/Include/Library/ChassisLib.h
> @@ -0,0 +1,51 @@
> +/** @file
> + Chassis Lib to provide Chessis specific functionality to all SOCs in
> + a Chassis.
> +
> + Copyright 2020 NXP
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +**/
> +
> +#ifndef CHASSIS_LIB_H__
> +#define CHASSIS_LIB_H__
> +
> +#include <Chassis.h>
> +
> +/**
> + Read Dcfg register
> +
> + @param Address The MMIO register to read.
> +
> + @return The value read.
> +**/
> +UINT32
> +EFIAPI
> +DcfgRead32 (
> + IN UINTN Address
> + );
> +
> +/**
> + Write Dcfg register
> +
> + @param Address The MMIO register to write.
> + @param Value The value to write to the MMIO register.
> +
> + @return Value.
> +**/
> +UINT32
> +EFIAPI
> +DcfgWrite32 (
> + IN UINTN Address,
> + IN UINT32 Value
> + );
> +
> +/**
> + Function to initialize Chassis Specific functions
> + **/
> +VOID
> +ChassisInit (
> + VOID
> + );
> +
> +#endif // CHASSIS_LIB_H__
> diff --git a/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c
> new file mode 100644
> index 000000000000..b3bb25029dd2
> --- /dev/null
> +++ b/Silicon/NXP/Chassis2/Library/ChassisLib/ChassisLib.c
> @@ -0,0 +1,97 @@
> +/** @file
> + Chassis specific functions common to all SOCs based on a specific Chessis
> +
> + Copyright 2020 NXP
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <Chassis.h>
> +#include <Uefi.h>
> +#include <Library/IoAccessLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/SerialPortLib.h>
> +
> +/**
> + Read Dcfg register
> +
> + @param Address The MMIO register to read.
> +
> + @return The value read.
> +**/
> +UINT32
> +EFIAPI
> +DcfgRead32 (
> + IN UINTN Address
> + )
> +{
> + MMIO_OPERATIONS_32 *DcfgOps;
> +
> + DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
> +
> + return DcfgOps->Read32 (Address);
> +}
The intended usage model for IoAccessLib is to retrieve the function
pointer struct once and then always refer to it. Since this is a
library, we could have a CONSTRUCTOR function (specified in the .inf)
and do something like:
STATIC MMIO_OPERATIONS mDcfgOps;
/**
Read Dcfg register
@param Address The MMIO register to read.
@return The value read.
**/
UINT32
EFIAPI
DcfgRead32 (
IN UINTN Address
)
{
return mDcfgOps->Read32 (Address);
}
/**
Write Dcfg register
@param Address The MMIO register to write.
@param Value The value to write to the MMIO register.
@return Value.
**/
UINT32
EFIAPI
DcfgWrite32 (
IN UINTN Address,
IN UINT32 Value
)
{
return mDcfgOps->Write32 (Address, Value);
}
...
/**
The constructor function initializes the IoAccessLib
function pointer structure.
@retval RETURN_SUCCESS The constructor always returns EFI_SUCCESS.
**/
EFI_STATUS
EFIAPI
ChassisLibConstructor (
VOID
)
{
mDcfgOps = GetMmioOperations (FeaturePcdGet (PcdDcfgBigEndian));
return EFI_SUCCESS;
}
/
Leif
> +
> +/**
> + Write Dcfg register
> +
> + @param Address The MMIO register to write.
> + @param Value The value to write to the MMIO register.
> +
> + @return Value.
> +**/
> +UINT32
> +EFIAPI
> +DcfgWrite32 (
> + IN UINTN Address,
> + IN UINT32 Value
> + )
> +{
> + MMIO_OPERATIONS_32 *DcfgOps;
> +
> + DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
> +
> + return DcfgOps->Write32 (Address, Value);
> +}
> +
> +/*
> + * Setup SMMU in bypass mode
> + * and also set its pagesize
> + */
> +STATIC
> +VOID
> +SmmuInit (
> + VOID
> + )
> +{
> + UINT32 Value;
> +
> + /* set pagesize as 64K and ssmu-500 in bypass mode */
> + Value = (MmioRead32 ((UINTN)SMMU_REG_SACR) | SACR_PAGESIZE_MASK);
> + MmioWrite32 ((UINTN)SMMU_REG_SACR, Value);
> +
> + Value = (MmioRead32 ((UINTN)SMMU_REG_SCR0) | SCR0_CLIENTPD_MASK);
> + Value &= ~SCR0_USFCFG_MASK;
> + MmioWrite32 ((UINTN)SMMU_REG_SCR0, Value);
> +
> + Value = (MmioRead32 ((UINTN)SMMU_REG_NSCR0) | SCR0_CLIENTPD_MASK);
> + Value &= ~SCR0_USFCFG_MASK;
> + MmioWrite32 ((UINTN)SMMU_REG_NSCR0, Value);
> +}
> +
> +/**
> + Function to initialize Chassis Specific functions
> + **/
> +VOID
> +ChassisInit (
> + VOID
> + )
> +{
> + //
> + // Early init serial Port to get board information.
> + //
> + SerialPortInitialize ();
> +
> + SmmuInit ();
> +}
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 20/24] NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg
2020-04-15 12:13 ` [PATCH edk2-platforms v3 20/24] NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg Pankaj Bansal
@ 2020-04-23 10:28 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 10:28 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:38 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> ArmPlatformHelper.S is being replaced by the ArmPlatformPkg version at
> commit hash f4dfad05dda2c7b29e8105605621f2b413f0af2b.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
> ---
>
> Notes:
> - Modify commit description
>
> Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf | 2 +
> Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c | 8 ---
> Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S | 60 ++++++++++++--------
> 3 files changed, 39 insertions(+), 31 deletions(-)
>
> diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
> index 07ca6b34445f..1faf99b99c54 100644
> --- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
> +++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.inf
> @@ -37,3 +37,5 @@
>
> [FixedPcd]
> gArmTokenSpaceGuid.PcdArmPrimaryCore
> + gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
> +
> diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
> index a554d1377484..dc81e7ba3101 100644
> --- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
> +++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/ArmPlatformLib.c
> @@ -137,11 +137,3 @@ ArmPlatformGetPlatformPpiList (
> *PpiList = gPlatformPpiTable;
> }
>
> -
> -UINTN
> -ArmPlatformGetCorePosition (
> - IN UINTN MpId
> - )
> -{
> - return 1;
> -}
> diff --git a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
> index dfbf73675a2d..b7c6dbdc2e61 100644
> --- a/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
> +++ b/Platform/NXP/LS1043aRdbPkg/Library/ArmPlatformLib/AArch64/ArmPlatformHelper.S
> @@ -1,31 +1,45 @@
> -# @file
> -#
> -# Copyright (c) 2012-2013, ARM Limited. All rights reserved.
> -# Copyright 2017, 2020 NXP
> -#
> -# SPDX-License-Identifier: BSD-2-Clause-Patent
> -#
> +//
> +// Copyright (c) 2012-2013, ARM Limited. All rights reserved.
> +//
> +// SPDX-License-Identifier: BSD-2-Clause-Patent
> +//
> +//
>
> #include <AsmMacroIoLibV8.h>
> -#include <AutoGen.h>
> -
> -.text
> -.align 2
> -
> -GCC_ASM_IMPORT(ArmReadMpidr)
> -
> -ASM_FUNC(ArmPlatformIsPrimaryCore)
> - tst x0, #3
> - cset x0, eq
> - ret
> +#include <Library/ArmLib.h>
>
> ASM_FUNC(ArmPlatformPeiBootAction)
> -EL1_OR_EL2(x0)
> -1:
> -2:
> ret
>
> +//UINTN
> +//ArmPlatformGetCorePosition (
> +// IN UINTN MpId
> +// );
> +// With this function: CorePos = (ClusterId * 4) + CoreId
> +ASM_FUNC(ArmPlatformGetCorePosition)
> + and x1, x0, #ARM_CORE_MASK
> + and x0, x0, #ARM_CLUSTER_MASK
> + add x0, x1, x0, LSR #6
> + ret
> +
> +//UINTN
> +//ArmPlatformGetPrimaryCoreMpId (
> +// VOID
> +// );
> ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
> - MOV32 (x0, FixedPcdGet32(PcdArmPrimaryCore))
> - ldrh w0, [x0]
> + MOV32 (w0, FixedPcdGet32 (PcdArmPrimaryCore))
> + ret
> +
> +//UINTN
> +//ArmPlatformIsPrimaryCore (
> +// IN UINTN MpId
> +// );
> +ASM_FUNC(ArmPlatformIsPrimaryCore)
> + MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCoreMask))
> + and x0, x0, x1
> + MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCore))
> + cmp w0, w1
> + mov x0, #1
> + mov x1, #0
> + csel x0, x0, x1, eq
> ret
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg
2020-04-15 12:13 ` [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg Pankaj Bansal
@ 2020-04-23 10:31 ` Leif Lindholm
2020-04-24 6:24 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 10:31 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:39 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> FVRules.fdf.inc is being replaced by the ArmVirtPkg/ArmVirtRules.fdf.inc
> at commit hash 746c5b6238f1ee55deb4b3ec32a6d732e27eeeaa
This is better - but why?
/
Leif
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> - Modify commit description
>
> Platform/NXP/FVRules.fdf.inc | 59 +++++++++++++-------
> 1 file changed, 38 insertions(+), 21 deletions(-)
>
> diff --git a/Platform/NXP/FVRules.fdf.inc b/Platform/NXP/FVRules.fdf.inc
> index c9fba65dae85..63de26abe056 100644
> --- a/Platform/NXP/FVRules.fdf.inc
> +++ b/Platform/NXP/FVRules.fdf.inc
> @@ -1,8 +1,7 @@
> -# FvRules.fdf.inc
> #
> -# Rules for creating FD.
> -#
> -# Copyright 2017-2019 NXP
> +# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
> +# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
> +# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -16,40 +15,49 @@
> #
> ################################################################################
>
> +
> +############################################################################
> +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
> +############################################################################
> +#
> +#[Rule.Common.DXE_DRIVER]
> +# FILE DRIVER = $(NAMED_GUID) {
> +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> +# COMPRESS PI_STD {
> +# GUIDED {
> +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> +# UI STRING="$(MODULE_NAME)" Optional
> +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> +# }
> +# }
> +# }
> +#
> +############################################################################
> +
> [Rule.Common.SEC]
> - FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
> - TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> + TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> }
>
> [Rule.Common.PEI_CORE]
> - FILE PEI_CORE = $(NAMED_GUID) {
> - TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
> + FILE PEI_CORE = $(NAMED_GUID) FIXED {
> + TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> UI STRING ="$(MODULE_NAME)" Optional
> }
>
> [Rule.Common.PEIM]
> - FILE PEIM = $(NAMED_GUID) {
> + FILE PEIM = $(NAMED_GUID) FIXED {
> PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> + TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> UI STRING="$(MODULE_NAME)" Optional
> }
>
> -[Rule.Common.PEIM.TIANOCOMPRESSED]
> - FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
> - PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> - GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
> - PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> - UI STRING="$(MODULE_NAME)" Optional
> - }
> - }
> -
> [Rule.Common.DXE_CORE]
> FILE DXE_CORE = $(NAMED_GUID) {
> PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> UI STRING="$(MODULE_NAME)" Optional
> }
>
> -
> [Rule.Common.UEFI_DRIVER]
> FILE DRIVER = $(NAMED_GUID) {
> DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> @@ -62,6 +70,8 @@
> DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> UI STRING="$(MODULE_NAME)" Optional
> + RAW ACPI Optional |.acpi
> + RAW ASL Optional |.aml
> }
>
> [Rule.Common.DXE_RUNTIME_DRIVER]
> @@ -73,7 +83,7 @@
>
> [Rule.Common.UEFI_APPLICATION]
> FILE APPLICATION = $(NAMED_GUID) {
> - UI STRING ="$(MODULE_NAME)" Optional
> + UI STRING ="$(MODULE_NAME)" Optional
> PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> }
>
> @@ -91,3 +101,10 @@
> UI STRING="$(MODULE_NAME)" Optional
> VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> }
> +
> +[Rule.Common.USER_DEFINED.ACPITABLE]
> + FILE FREEFORM = $(NAMED_GUID) {
> + RAW ACPI |.acpi
> + RAW ASL |.aml
> + UI STRING="$(MODULE_NAME)" Optional
> + }
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 24/24] Platform/NXP/LS1043aRdbPkg: Add PEI Phase
2020-04-15 12:13 ` [PATCH edk2-platforms v3 24/24] Platform/NXP/LS1043aRdbPkg: Add PEI Phase Pankaj Bansal
@ 2020-04-23 10:33 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 10:33 UTC (permalink / raw)
To: Pankaj Bansal
Cc: Meenakshi Aggarwal, Michael D Kinney, devel, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Wed, Apr 15, 2020 at 17:43:42 +0530, Pankaj Bansal wrote:
> From: Pankaj Bansal <pankaj.bansal@nxp.com>
>
> Add PEI phase to LS1043aRdb. This is needed becuase we need to have
> dynamic PCDs support to be able to reserve memory before reporting
> memory to UEFI fimrware.
> Using PEI phase we are now also dynamically setting the
> PcdSystemMemoryBase and PcdSystemMemorySize depending upon the DRAM
> regions detected.
> This in turn would depend on the DDR DIMMs installed on board.
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
> ---
>
> Notes:
> - Update commit description
>
> Silicon/NXP/NxpQoriqLs.dsc.inc | 61 +++++++++++++-----
> Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc | 9 ---
> Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf | 18 ++++--
> Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf | 3 +-
> Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c | 67 +++++++++++---------
> 5 files changed, 98 insertions(+), 60 deletions(-)
>
> diff --git a/Silicon/NXP/NxpQoriqLs.dsc.inc b/Silicon/NXP/NxpQoriqLs.dsc.inc
> index 3c8b11d9e04c..14fbea72d3f8 100644
> --- a/Silicon/NXP/NxpQoriqLs.dsc.inc
> +++ b/Silicon/NXP/NxpQoriqLs.dsc.inc
> @@ -93,30 +93,35 @@
> CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
> NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
> + UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
>
> I2cLib|Silicon/NXP/Library/I2cLib/I2cLib.inf
> ResetSystemLib|ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
> IoAccessLib|Silicon/NXP/Library/IoAccessLib/IoAccessLib.inf
>
> + PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
> MemoryInitPeiLib|Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
>
> [LibraryClasses.common.SEC]
> PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> - UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
> - ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> - LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
> - PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> - HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
> - PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
> - MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
> + DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf
> + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
> + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
> + PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
> + MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
> +
> +[LibraryClasses.common.PEI_CORE]
> + PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
> + HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
> + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
> + MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
> + PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
> PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
> - PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
> + ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
> + ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
> + OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
>
> - # 1/123 faster than Stm or Vstm version
> - BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> -
> - # Uncomment to turn on GDB stub in SEC.
> - #DebugAgentLib|EmbeddedPkg/Library/GdbDebugAgent/GdbDebugAgent.inf
> + PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
>
> [LibraryClasses.common.PEIM]
> PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
> @@ -125,14 +130,16 @@
> PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
> HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
> MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
> + PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
> + ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
> ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
> + OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
>
> [LibraryClasses.common.DXE_CORE]
> HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
> MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
> DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
> ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
> - UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
> DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
>
> @@ -204,6 +211,9 @@
> gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
> gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
>
> + gArmTokenSpaceGuid.PcdSystemMemoryBase|0
> + gArmTokenSpaceGuid.PcdSystemMemorySize|0
> +
> [PcdsDynamicHii.common.DEFAULT]
> gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|L"Timeout"|gEfiGlobalVariableGuid|0x0|10
>
> @@ -224,6 +234,12 @@
> gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
> gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
>
> + ## Base of DRAM
> + ## since TFA puts Fd at 0x2000000 offset from DRAM base, we can use this space
> + ## for temporary ram
> + gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x80000000
> + gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
> +
> !if $(TARGET) == RELEASE
> gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x27
> gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x81000001
> @@ -281,13 +297,26 @@
> ################################################################################
> [Components.common]
> #
> - # SEC
> + # PEI Phase modules
> #
> - ArmPlatformPkg/PrePi/PeiUniCore.inf
> + ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
> +
> + MdeModulePkg/Core/Pei/PeiMain.inf
> MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
> <LibraryClasses>
> PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> }
> + MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
> + MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
> +
> + ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
> + ArmPkg/Drivers/CpuPei/CpuPei.inf
> + ArmPlatformPkg/PlatformPei/PlatformPeim.inf
> +
> + MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
> + <LibraryClasses>
> + NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
> + }
>
> #
> # DXE
> diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
> index d486c9b36fab..d45fd67c03b5 100644
> --- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
> +++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.dsc
> @@ -30,15 +30,6 @@
> RealTimeClockLib|Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
>
> [PcdsFixedAtBuild.common]
> -
> - #
> - # LS1043a board Specific PCDs
> - # XX (DRAM - Region 1 2GB)
> - # (NOR - IFC Region 1 512MB)
> - gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000
> - gArmTokenSpaceGuid.PcdSystemMemorySize|0x7BE00000
> - gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x02000000
> -
> #
> # RTC Pcds
> #
> diff --git a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
> index 99fbc87e1200..931d0bb14f9b 100644
> --- a/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
> +++ b/Platform/NXP/LS1043aRdbPkg/LS1043aRdbPkg.fdf
> @@ -24,10 +24,10 @@
>
> [FD.LS1043ARDB_EFI]
> BaseAddress = 0x82000000|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device.
> -Size = 0x000ED000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device
> +Size = 0x00140000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device
> ErasePolarity = 1
> -BlockSize = 0x1
> -NumBlocks = 0xED000
> +BlockSize = 0x40000
> +NumBlocks = 0x5
>
> ################################################################################
> #
> @@ -44,7 +44,7 @@ NumBlocks = 0xED000
> # RegionType <FV, DATA, or FILE>
> #
> ################################################################################
> -0x00000000|0x000ED000
> +0x00000000|0x00140000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> FV = FVMAIN_COMPACT
>
> @@ -159,7 +159,15 @@ READ_STATUS = TRUE
> READ_LOCK_CAP = TRUE
> READ_LOCK_STATUS = TRUE
>
> - INF ArmPlatformPkg/PrePi/PeiUniCore.inf
> + INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
> + INF MdeModulePkg/Core/Pei/PeiMain.inf
> + INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
> + INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
> + INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
> + INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
> + INF ArmPkg/Drivers/CpuPei/CpuPei.inf
> + INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
> + INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
>
> FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
> SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
> diff --git a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
> index ad2371115b17..a33f8cd3f743 100644
> --- a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
> +++ b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.inf
> @@ -13,7 +13,8 @@
> FILE_GUID = 55ddb6e0-70b5-11e0-b33e-0002a5d5c51b
> MODULE_TYPE = BASE
> VERSION_STRING = 1.0
> - LIBRARY_CLASS = MemoryInitPeiLib|SEC PEIM DXE_DRIVER
> + LIBRARY_CLASS = MemoryInitPeiLib|PEIM
> + CONSTRUCTOR = MemoryInitPeiLibConstructor
>
> [Sources]
> MemoryInitPeiLib.c
> diff --git a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
> index ea3e7d59532e..932bdf948f6f 100644
> --- a/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
> +++ b/Silicon/NXP/Library/MemoryInitPeiLib/MemoryInitPeiLib.c
> @@ -111,22 +111,17 @@ GetDramRegionsInfo (
>
> /**
> Get the installed RAM information.
> - Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
> + Initialize Memory HOBs (Resource Descriptor HOBs)
> + Set the PcdSystemMemoryBase and PcdSystemMemorySize.
>
> - @param[in] UefiMemoryBase Base address of region used by UEFI in
> - permanent memory
> - @param[in] UefiMemorySize Size of the region used by UEFI in permanent memory
> -
> - @return EFI_SUCCESS Successfuly Initialize MMU and Memory HOBs.
> + @return EFI_SUCCESS Successfuly retrieved the system memory information
> **/
> EFI_STATUS
> EFIAPI
> -MemoryPeim (
> - IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
> - IN UINT64 UefiMemorySize
> +MemoryInitPeiLibConstructor (
> + VOID
> )
> {
> - ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
> INT32 Index;
> UINTN BaseAddress;
> UINTN Size;
> @@ -137,18 +132,6 @@ MemoryPeim (
> UINTN FdTop;
> BOOLEAN FoundSystemMem;
>
> - // Get Virtual Memory Map from the Platform Library
> - ArmPlatformGetVirtualMemoryMap (&MemoryTable);
> -
> - //
> - // Ensure MemoryTable[0].Length which is size of DRAM has been set
> - // by ArmPlatformGetVirtualMemoryMap ()
> - //
> - ASSERT (MemoryTable[0].Length != 0);
> -
> - //
> - // Now, the permanent memory has been installed, we can call AllocatePages()
> - //
> ResourceAttributes = (
> EFI_RESOURCE_ATTRIBUTE_PRESENT |
> EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
> @@ -163,8 +146,8 @@ MemoryPeim (
>
> GetDramRegionsInfo (DramRegions, ARRAY_SIZE (DramRegions));
>
> - FdBase = (UINTN)FixedPcdGet64 (PcdFdBaseAddress);
> - FdTop = FdBase + (UINTN)FixedPcdGet32 (PcdFdSize);
> + FdBase = (UINTN)PcdGet64 (PcdFdBaseAddress);
> + FdTop = FdBase + (UINTN)PcdGet32 (PcdFdSize);
>
> // Declare memory regios to system
> // The DRAM region info is sorted based on the RAM address is SOC memory map.
> @@ -217,8 +200,8 @@ MemoryPeim (
> );
> };
> // Mark the memory covering the Firmware Device as boot services data
> - BuildMemoryAllocationHob (FixedPcdGet64 (PcdFdBaseAddress),
> - FixedPcdGet32 (PcdFdSize),
> + BuildMemoryAllocationHob (PcdGet64 (PcdFdBaseAddress),
> + PcdGet32 (PcdFdSize),
> EfiBootServicesData);
> } else {
> BuildResourceDescriptorHob (
> @@ -236,17 +219,43 @@ MemoryPeim (
> Size = DramRegions[Index].Size;
>
> if (FdBase >= BaseAddress && FdTop <= Top) {
> - Size -= (UINTN)FixedPcdGet32 (PcdFdSize);
> + Size -= (UINTN)PcdGet32 (PcdFdSize);
> }
>
> - if ((UefiMemoryBase >= BaseAddress) && (Size >= UefiMemorySize)) {
> + if (Size >= FixedPcdGet32 (PcdSystemMemoryUefiRegionSize)) {
> FoundSystemMem = TRUE;
> + PcdSet64S (PcdSystemMemoryBase, BaseAddress);
> + PcdSet64S (PcdSystemMemorySize, Size);
> }
> }
>
> ASSERT (FoundSystemMem == TRUE);
>
> - // Build Memory Allocation Hob
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Initialize MMU
> +
> + @param[in] UefiMemoryBase Base address of region used by UEFI in
> + permanent memory
> + @param[in] UefiMemorySize Size of the region used by UEFI in permanent memory
> +
> + @return EFI_SUCCESS Successfuly Initialize MMU
> +**/
> +EFI_STATUS
> +EFIAPI
> +MemoryPeim (
> + IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
> + IN UINT64 UefiMemorySize
> + )
> +{
> + ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
> +
> + // Get Virtual Memory Map from the Platform Library
> + ArmPlatformGetVirtualMemoryMap (&MemoryTable);
> +
> + // Initialize Mmu
> InitMmu (MemoryTable);
>
> if (FeaturePcdGet (PcdPrePiProduceMemoryTypeInformationHob)) {
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 10:27 ` Leif Lindholm
@ 2020-04-23 11:38 ` Pankaj Bansal
2020-04-23 11:57 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-23 11:38 UTC (permalink / raw)
To: Leif Lindholm
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> > +
> > + @return The value read.
> > +**/
> > +UINT32
> > +EFIAPI
> > +DcfgRead32 (
> > + IN UINTN Address
> > + )
> > +{
> > + MMIO_OPERATIONS_32 *DcfgOps;
> > +
> > + DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
> > +
> > + return DcfgOps->Read32 (Address);
> > +}
>
> The intended usage model for IoAccessLib is to retrieve the function
> pointer struct once and then always refer to it. Since this is a
> library, we could have a CONSTRUCTOR function (specified in the .inf)
I had thought of this, but decided against it because of this reason:
The order of Library constructor call for a module cannot be guaranteed.
https://edk2.groups.io/g/devel/message/57254 is an good example of this.
BaseDebugLibSerialPortConstructor would need to depend on ChassisLibConstructor,
to retrieve the UART clock frequency. If the constructor calls are not guaranteed, BaseDebugLibSerialPortConstructor
would fail and it would cause ASSERT due to ASSERT_RETURN_ERROR (Status)
> and do something like:
>
> STATIC MMIO_OPERATIONS mDcfgOps;
>
> /**
> Read Dcfg register
>
> @param Address The MMIO register to read.
>
> @return The value read.
> **/
> UINT32
> EFIAPI
> DcfgRead32 (
> IN UINTN Address
> )
> {
> return mDcfgOps->Read32 (Address);
> }
>
> /**
> Write Dcfg register
>
> @param Address The MMIO register to write.
> @param Value The value to write to the MMIO register.
>
> @return Value.
>
> **/
> UINT32
> EFIAPI
> DcfgWrite32 (
> IN UINTN Address,
> IN UINT32 Value
> )
> {
> return mDcfgOps->Write32 (Address, Value);
> }
>
> ...
>
> /**
> The constructor function initializes the IoAccessLib
> function pointer structure.
>
> @retval RETURN_SUCCESS The constructor always returns EFI_SUCCESS.
>
> **/
> EFI_STATUS
> EFIAPI
> ChassisLibConstructor (
> VOID
> )
> {
> mDcfgOps = GetMmioOperations (FeaturePcdGet (PcdDcfgBigEndian));
>
> return EFI_SUCCESS;
> }
>
> /
> Leif
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 11:38 ` Pankaj Bansal
@ 2020-04-23 11:57 ` Leif Lindholm
2020-04-23 12:02 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 11:57 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Thu, Apr 23, 2020 at 11:38:12 +0000, Pankaj Bansal (OSS) wrote:
> > > +
> > > + @return The value read.
> > > +**/
> > > +UINT32
> > > +EFIAPI
> > > +DcfgRead32 (
> > > + IN UINTN Address
> > > + )
> > > +{
> > > + MMIO_OPERATIONS_32 *DcfgOps;
> > > +
> > > + DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
> > > +
> > > + return DcfgOps->Read32 (Address);
> > > +}
> >
> > The intended usage model for IoAccessLib is to retrieve the function
> > pointer struct once and then always refer to it. Since this is a
> > library, we could have a CONSTRUCTOR function (specified in the .inf)
>
> I had thought of this, but decided against it because of this reason:
> The order of Library constructor call for a module cannot be guaranteed.
> https://edk2.groups.io/g/devel/message/57254 is an good example of this.
> BaseDebugLibSerialPortConstructor would need to depend on ChassisLibConstructor,
> to retrieve the UART clock frequency. If the constructor calls are not guaranteed, BaseDebugLibSerialPortConstructor
> would fail and it would cause ASSERT due to ASSERT_RETURN_ERROR (Status)
If this is a problem (and I recall Ard pointing out some shortcomings
in the dependency handling in the past), we can solve this with an
explicit initialisation call in the SoC or platform init code.
/
Leif
>
> > and do something like:
> >
> > STATIC MMIO_OPERATIONS mDcfgOps;
> >
> > /**
> > Read Dcfg register
> >
> > @param Address The MMIO register to read.
> >
> > @return The value read.
> > **/
> > UINT32
> > EFIAPI
> > DcfgRead32 (
> > IN UINTN Address
> > )
> > {
> > return mDcfgOps->Read32 (Address);
> > }
> >
> > /**
> > Write Dcfg register
> >
> > @param Address The MMIO register to write.
> > @param Value The value to write to the MMIO register.
> >
> > @return Value.
> >
> > **/
> > UINT32
> > EFIAPI
> > DcfgWrite32 (
> > IN UINTN Address,
> > IN UINT32 Value
> > )
> > {
> > return mDcfgOps->Write32 (Address, Value);
> > }
> >
> > ...
> >
> > /**
> > The constructor function initializes the IoAccessLib
> > function pointer structure.
> >
> > @retval RETURN_SUCCESS The constructor always returns EFI_SUCCESS.
> >
> > **/
> > EFI_STATUS
> > EFIAPI
> > ChassisLibConstructor (
> > VOID
> > )
> > {
> > mDcfgOps = GetMmioOperations (FeaturePcdGet (PcdDcfgBigEndian));
> >
> > return EFI_SUCCESS;
> > }
> >
> > /
> > Leif
> >
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 11:57 ` Leif Lindholm
@ 2020-04-23 12:02 ` Pankaj Bansal
2020-04-23 12:05 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-23 12:02 UTC (permalink / raw)
To: Leif Lindholm
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> -----Original Message-----
> From: Leif Lindholm <leif@nuviainc.com>
> Sent: Thursday, April 23, 2020 5:27 PM
> To: Pankaj Bansal (OSS) <pankaj.bansal@oss.nxp.com>
> Cc: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Michael D Kinney
> <michael.d.kinney@intel.com>; devel@edk2.groups.io; Varun Sethi
> <V.Sethi@nxp.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> Mahmoud@arm.com>; Jon Nettleton <jon@solid-run.com>; Ard Biesheuvel
> <ard.biesheuvel@linaro.org>
> Subject: Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2
> Package
>
> On Thu, Apr 23, 2020 at 11:38:12 +0000, Pankaj Bansal (OSS) wrote:
> > > > +
> > > > + @return The value read.
> > > > +**/
> > > > +UINT32
> > > > +EFIAPI
> > > > +DcfgRead32 (
> > > > + IN UINTN Address
> > > > + )
> > > > +{
> > > > + MMIO_OPERATIONS_32 *DcfgOps;
> > > > +
> > > > + DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
> > > > +
> > > > + return DcfgOps->Read32 (Address);
> > > > +}
> > >
> > > The intended usage model for IoAccessLib is to retrieve the function
> > > pointer struct once and then always refer to it. Since this is a
> > > library, we could have a CONSTRUCTOR function (specified in the .inf)
> >
> > I had thought of this, but decided against it because of this reason:
> > The order of Library constructor call for a module cannot be guaranteed.
> > https://edk2.groups.io/g/devel/message/57254 is an good example of this.
> > BaseDebugLibSerialPortConstructor would need to depend on
> ChassisLibConstructor,
> > to retrieve the UART clock frequency. If the constructor calls are not
> guaranteed, BaseDebugLibSerialPortConstructor
> > would fail and it would cause ASSERT due to ASSERT_RETURN_ERROR
> (Status)
>
> If this is a problem (and I recall Ard pointing out some shortcomings
> in the dependency handling in the past), we can solve this with an
> explicit initialisation call in the SoC or platform init code.
You mean put ChassisLibConstructor() call in SerialPortInitialize () ?
>
> /
> Leif
>
> >
> > > and do something like:
> > >
> > > STATIC MMIO_OPERATIONS mDcfgOps;
> > >
> > > /**
> > > Read Dcfg register
> > >
> > > @param Address The MMIO register to read.
> > >
> > > @return The value read.
> > > **/
> > > UINT32
> > > EFIAPI
> > > DcfgRead32 (
> > > IN UINTN Address
> > > )
> > > {
> > > return mDcfgOps->Read32 (Address);
> > > }
> > >
> > > /**
> > > Write Dcfg register
> > >
> > > @param Address The MMIO register to write.
> > > @param Value The value to write to the MMIO register.
> > >
> > > @return Value.
> > >
> > > **/
> > > UINT32
> > > EFIAPI
> > > DcfgWrite32 (
> > > IN UINTN Address,
> > > IN UINT32 Value
> > > )
> > > {
> > > return mDcfgOps->Write32 (Address, Value);
> > > }
> > >
> > > ...
> > >
> > > /**
> > > The constructor function initializes the IoAccessLib
> > > function pointer structure.
> > >
> > > @retval RETURN_SUCCESS The constructor always returns EFI_SUCCESS.
> > >
> > > **/
> > > EFI_STATUS
> > > EFIAPI
> > > ChassisLibConstructor (
> > > VOID
> > > )
> > > {
> > > mDcfgOps = GetMmioOperations (FeaturePcdGet (PcdDcfgBigEndian));
> > >
> > > return EFI_SUCCESS;
> > > }
> > >
> > > /
> > > Leif
> > >
> >
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 12:02 ` Pankaj Bansal
@ 2020-04-23 12:05 ` Leif Lindholm
2020-04-23 13:41 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 12:05 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Thu, Apr 23, 2020 at 12:02:16 +0000, Pankaj Bansal (OSS) wrote:
>
>
> > -----Original Message-----
> > From: Leif Lindholm <leif@nuviainc.com>
> > Sent: Thursday, April 23, 2020 5:27 PM
> > To: Pankaj Bansal (OSS) <pankaj.bansal@oss.nxp.com>
> > Cc: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Michael D Kinney
> > <michael.d.kinney@intel.com>; devel@edk2.groups.io; Varun Sethi
> > <V.Sethi@nxp.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> > Mahmoud@arm.com>; Jon Nettleton <jon@solid-run.com>; Ard Biesheuvel
> > <ard.biesheuvel@linaro.org>
> > Subject: Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2
> > Package
> >
> > On Thu, Apr 23, 2020 at 11:38:12 +0000, Pankaj Bansal (OSS) wrote:
> > > > > +
> > > > > + @return The value read.
> > > > > +**/
> > > > > +UINT32
> > > > > +EFIAPI
> > > > > +DcfgRead32 (
> > > > > + IN UINTN Address
> > > > > + )
> > > > > +{
> > > > > + MMIO_OPERATIONS_32 *DcfgOps;
> > > > > +
> > > > > + DcfgOps = GetMmioOperations32 (FeaturePcdGet (PcdDcfgBigEndian));
> > > > > +
> > > > > + return DcfgOps->Read32 (Address);
> > > > > +}
> > > >
> > > > The intended usage model for IoAccessLib is to retrieve the function
> > > > pointer struct once and then always refer to it. Since this is a
> > > > library, we could have a CONSTRUCTOR function (specified in the .inf)
> > >
> > > I had thought of this, but decided against it because of this reason:
> > > The order of Library constructor call for a module cannot be guaranteed.
> > > https://edk2.groups.io/g/devel/message/57254 is an good example of this.
> > > BaseDebugLibSerialPortConstructor would need to depend on
> > ChassisLibConstructor,
> > > to retrieve the UART clock frequency. If the constructor calls are not
> > guaranteed, BaseDebugLibSerialPortConstructor
> > > would fail and it would cause ASSERT due to ASSERT_RETURN_ERROR
> > (Status)
> >
> > If this is a problem (and I recall Ard pointing out some shortcomings
> > in the dependency handling in the past), we can solve this with an
> > explicit initialisation call in the SoC or platform init code.
>
> You mean put ChassisLibConstructor() call in SerialPortInitialize () ?
Or before the call to SerialPortInitialize in ChassisInit.
/
Leif
>
> >
> > /
> > Leif
> >
> > >
> > > > and do something like:
> > > >
> > > > STATIC MMIO_OPERATIONS mDcfgOps;
> > > >
> > > > /**
> > > > Read Dcfg register
> > > >
> > > > @param Address The MMIO register to read.
> > > >
> > > > @return The value read.
> > > > **/
> > > > UINT32
> > > > EFIAPI
> > > > DcfgRead32 (
> > > > IN UINTN Address
> > > > )
> > > > {
> > > > return mDcfgOps->Read32 (Address);
> > > > }
> > > >
> > > > /**
> > > > Write Dcfg register
> > > >
> > > > @param Address The MMIO register to write.
> > > > @param Value The value to write to the MMIO register.
> > > >
> > > > @return Value.
> > > >
> > > > **/
> > > > UINT32
> > > > EFIAPI
> > > > DcfgWrite32 (
> > > > IN UINTN Address,
> > > > IN UINT32 Value
> > > > )
> > > > {
> > > > return mDcfgOps->Write32 (Address, Value);
> > > > }
> > > >
> > > > ...
> > > >
> > > > /**
> > > > The constructor function initializes the IoAccessLib
> > > > function pointer structure.
> > > >
> > > > @retval RETURN_SUCCESS The constructor always returns EFI_SUCCESS.
> > > >
> > > > **/
> > > > EFI_STATUS
> > > > EFIAPI
> > > > ChassisLibConstructor (
> > > > VOID
> > > > )
> > > > {
> > > > mDcfgOps = GetMmioOperations (FeaturePcdGet (PcdDcfgBigEndian));
> > > >
> > > > return EFI_SUCCESS;
> > > > }
> > > >
> > > > /
> > > > Leif
> > > >
> > >
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 12:05 ` Leif Lindholm
@ 2020-04-23 13:41 ` Pankaj Bansal
2020-04-23 14:18 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-23 13:41 UTC (permalink / raw)
To: Leif Lindholm
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> -----Original Message-----
> From: Leif Lindholm <leif@nuviainc.com>
> Sent: Thursday, April 23, 2020 5:36 PM
> To: Pankaj Bansal (OSS) <pankaj.bansal@oss.nxp.com>
> Cc: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Michael D Kinney
> <michael.d.kinney@intel.com>; devel@edk2.groups.io; Varun Sethi
> <V.Sethi@nxp.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> Mahmoud@arm.com>; Jon Nettleton <jon@solid-run.com>; Ard Biesheuvel
> <ard.biesheuvel@linaro.org>
> Subject: Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2
> Package
>
> On Thu, Apr 23, 2020 at 12:02:16 +0000, Pankaj Bansal (OSS) wrote:
> >
> >
> > > -----Original Message-----
> > > From: Leif Lindholm <leif@nuviainc.com>
> > > Sent: Thursday, April 23, 2020 5:27 PM
> > > To: Pankaj Bansal (OSS) <pankaj.bansal@oss.nxp.com>
> > > Cc: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Michael D
> Kinney
> > > <michael.d.kinney@intel.com>; devel@edk2.groups.io; Varun Sethi
> > > <V.Sethi@nxp.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> > > Mahmoud@arm.com>; Jon Nettleton <jon@solid-run.com>; Ard Biesheuvel
> > > <ard.biesheuvel@linaro.org>
> > > Subject: Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2
> > > Package
> > >
> > > On Thu, Apr 23, 2020 at 11:38:12 +0000, Pankaj Bansal (OSS) wrote:
> > > > > > +
> > > > > > + @return The value read.
> > > > > > +**/
> > > > > > +UINT32
> > > > > > +EFIAPI
> > > > > > +DcfgRead32 (
> > > > > > + IN UINTN Address
> > > > > > + )
> > > > > > +{
> > > > > > + MMIO_OPERATIONS_32 *DcfgOps;
> > > > > > +
> > > > > > + DcfgOps = GetMmioOperations32 (FeaturePcdGet
> (PcdDcfgBigEndian));
> > > > > > +
> > > > > > + return DcfgOps->Read32 (Address);
> > > > > > +}
> > > > >
> > > > > The intended usage model for IoAccessLib is to retrieve the function
> > > > > pointer struct once and then always refer to it. Since this is a
> > > > > library, we could have a CONSTRUCTOR function (specified in the .inf)
> > > >
> > > > I had thought of this, but decided against it because of this reason:
> > > > The order of Library constructor call for a module cannot be guaranteed.
> > > > https://edk2.groups.io/g/devel/message/57254 is an good example of
> this.
> > > > BaseDebugLibSerialPortConstructor would need to depend on
> > > ChassisLibConstructor,
> > > > to retrieve the UART clock frequency. If the constructor calls are not
> > > guaranteed, BaseDebugLibSerialPortConstructor
> > > > would fail and it would cause ASSERT due to ASSERT_RETURN_ERROR
> > > (Status)
> > >
> > > If this is a problem (and I recall Ard pointing out some shortcomings
> > > in the dependency handling in the past), we can solve this with an
> > > explicit initialisation call in the SoC or platform init code.
> >
> > You mean put ChassisLibConstructor() call in SerialPortInitialize () ?
>
> Or before the call to SerialPortInitialize in ChassisInit.
But SerialPortInitialize would be called from each module.
Each module that has SerialPort and ChassiLib linked to it would have a
local copy of mDcfgOps, which needs to be initialized.
>
> /
> Leif
>
> >
> > >
> > > /
> > > Leif
> > >
> > > >
> > > > > and do something like:
> > > > >
> > > > > STATIC MMIO_OPERATIONS mDcfgOps;
> > > > >
> > > > > /**
> > > > > Read Dcfg register
> > > > >
> > > > > @param Address The MMIO register to read.
> > > > >
> > > > > @return The value read.
> > > > > **/
> > > > > UINT32
> > > > > EFIAPI
> > > > > DcfgRead32 (
> > > > > IN UINTN Address
> > > > > )
> > > > > {
> > > > > return mDcfgOps->Read32 (Address);
> > > > > }
> > > > >
> > > > > /**
> > > > > Write Dcfg register
> > > > >
> > > > > @param Address The MMIO register to write.
> > > > > @param Value The value to write to the MMIO register.
> > > > >
> > > > > @return Value.
> > > > >
> > > > > **/
> > > > > UINT32
> > > > > EFIAPI
> > > > > DcfgWrite32 (
> > > > > IN UINTN Address,
> > > > > IN UINT32 Value
> > > > > )
> > > > > {
> > > > > return mDcfgOps->Write32 (Address, Value);
> > > > > }
> > > > >
> > > > > ...
> > > > >
> > > > > /**
> > > > > The constructor function initializes the IoAccessLib
> > > > > function pointer structure.
> > > > >
> > > > > @retval RETURN_SUCCESS The constructor always returns
> EFI_SUCCESS.
> > > > >
> > > > > **/
> > > > > EFI_STATUS
> > > > > EFIAPI
> > > > > ChassisLibConstructor (
> > > > > VOID
> > > > > )
> > > > > {
> > > > > mDcfgOps = GetMmioOperations (FeaturePcdGet (PcdDcfgBigEndian));
> > > > >
> > > > > return EFI_SUCCESS;
> > > > > }
> > > > >
> > > > > /
> > > > > Leif
> > > > >
> > > >
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 13:41 ` Pankaj Bansal
@ 2020-04-23 14:18 ` Leif Lindholm
2020-04-23 14:45 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 14:18 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Thu, Apr 23, 2020 at 13:41:14 +0000, Pankaj Bansal (OSS) wrote:
> > > > > > The intended usage model for IoAccessLib is to retrieve the function
> > > > > > pointer struct once and then always refer to it. Since this is a
> > > > > > library, we could have a CONSTRUCTOR function (specified in the .inf)
> > > > >
> > > > > I had thought of this, but decided against it because of this reason:
> > > > > The order of Library constructor call for a module cannot be guaranteed.
> > > > > https://edk2.groups.io/g/devel/message/57254 is an good example of
> > this.
> > > > > BaseDebugLibSerialPortConstructor would need to depend on
> > > > ChassisLibConstructor,
> > > > > to retrieve the UART clock frequency. If the constructor calls are not
> > > > guaranteed, BaseDebugLibSerialPortConstructor
> > > > > would fail and it would cause ASSERT due to ASSERT_RETURN_ERROR
> > > > (Status)
> > > >
> > > > If this is a problem (and I recall Ard pointing out some shortcomings
> > > > in the dependency handling in the past), we can solve this with an
> > > > explicit initialisation call in the SoC or platform init code.
> > >
> > > You mean put ChassisLibConstructor() call in SerialPortInitialize () ?
> >
> > Or before the call to SerialPortInitialize in ChassisInit.
>
> But SerialPortInitialize would be called from each module.
Why would multiple modules need to initialize the serial port?
> Each module that has SerialPort and ChassiLib linked to it would have a
> local copy of mDcfgOps, which needs to be initialized.
On the surface it makes more sense for the function that initializes
mmio accessors for chassis to be in the chassis initialization
function.
In the current tree I can only see one user of SerialPortLib and one
of ChassisLib - but you are suggesting there will be several per
platform? If so, A better splution may ne to consider wrapping
DcfgRead32/DcfgWrite32 in a protocol instead of depending on the
ChassisLib.
/
Leif
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 14:18 ` Leif Lindholm
@ 2020-04-23 14:45 ` Pankaj Bansal
2020-04-23 15:26 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-23 14:45 UTC (permalink / raw)
To: Leif Lindholm
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> > > > You mean put ChassisLibConstructor() call in SerialPortInitialize () ?
> > >
> > > Or before the call to SerialPortInitialize in ChassisInit.
> >
> > But SerialPortInitialize would be called from each module.
>
> Why would multiple modules need to initialize the serial port?
That's how the DebugLib has been designed.
DebugLib is used by all modules to print info on console.
BaseDebugLibSerialPortConstructor calls SerialPortInitialize.
So SerialPortInitialize is called by all the modules.
Which is the reason when I forked the BaseSerialPortLib16550,
I removed SerialPortInitalize functionality.
https://edk2.groups.io/g/devel/message/54011
>
> > Each module that has SerialPort and ChassiLib linked to it would have a
> > local copy of mDcfgOps, which needs to be initialized.
>
> On the surface it makes more sense for the function that initializes
> mmio accessors for chassis to be in the chassis initialization
> function.
>
> In the current tree I can only see one user of SerialPortLib and one
> of ChassisLib - but you are suggesting there will be several per
> platform? If so, A better splution may ne to consider wrapping
> DcfgRead32/DcfgWrite32 in a protocol instead of depending on the
> ChassisLib.
The protocol would not be available in SEC and PEI phase.
>
> /
> Leif
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 14:45 ` Pankaj Bansal
@ 2020-04-23 15:26 ` Leif Lindholm
2020-04-24 2:42 ` Pankaj Bansal
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-23 15:26 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Thu, Apr 23, 2020 at 14:45:03 +0000, Pankaj Bansal (OSS) wrote:
> > > > > You mean put ChassisLibConstructor() call in SerialPortInitialize () ?
> > > >
> > > > Or before the call to SerialPortInitialize in ChassisInit.
> > >
> > > But SerialPortInitialize would be called from each module.
> >
> > Why would multiple modules need to initialize the serial port?
>
> That's how the DebugLib has been designed.
> DebugLib is used by all modules to print info on console.
> BaseDebugLibSerialPortConstructor calls SerialPortInitialize.
> So SerialPortInitialize is called by all the modules.
Sure, but the bit where ChassisLib returns the active clock
configuration does not need to happen for each initialization.
That value can be cached.
> Which is the reason when I forked the BaseSerialPortLib16550,
> I removed SerialPortInitalize functionality.
> https://edk2.groups.io/g/devel/message/54011
>
> >
> > > Each module that has SerialPort and ChassiLib linked to it would have a
> > > local copy of mDcfgOps, which needs to be initialized.
> >
> > On the surface it makes more sense for the function that initializes
> > mmio accessors for chassis to be in the chassis initialization
> > function.
> >
> > In the current tree I can only see one user of SerialPortLib and one
> > of ChassisLib - but you are suggesting there will be several per
> > platform? If so, A better splution may ne to consider wrapping
> > DcfgRead32/DcfgWrite32 in a protocol instead of depending on the
> > ChassisLib.
>
> The protocol would not be available in SEC and PEI phase.
Fair.
/
Leif
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-23 15:26 ` Leif Lindholm
@ 2020-04-24 2:42 ` Pankaj Bansal
2020-04-24 15:51 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-24 2:42 UTC (permalink / raw)
To: Leif Lindholm, Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> > >
> > > Why would multiple modules need to initialize the serial port?
> >
> > That's how the DebugLib has been designed.
> > DebugLib is used by all modules to print info on console.
> > BaseDebugLibSerialPortConstructor calls SerialPortInitialize.
> > So SerialPortInitialize is called by all the modules.
>
> Sure, but the bit where ChassisLib returns the active clock
> configuration does not need to happen for each initialization.
> That value can be cached.
The only mechanism I know for passing a cached value between different modules
is either use PCDs or use HOBs.
We have already explored both in https://edk2.groups.io/g/devel/message/57254
and https://edk2.groups.io/g/devel/message/56530
Moreover the compiler can optimize the PcdDcfgBigEndian evaluation.
So no overhead would be observed in evaluating PcdDcfgBigEndian in every call.
>
> > Which is the reason when I forked the BaseSerialPortLib16550,
> > I removed SerialPortInitalize functionality.
> > https://edk2.groups.io/g/devel/message/54011
> >
> > >
> > > > Each module that has SerialPort and ChassiLib linked to it would have a
> > > > local copy of mDcfgOps, which needs to be initialized.
> > >
> > > On the surface it makes more sense for the function that initializes
> > > mmio accessors for chassis to be in the chassis initialization
> > > function.
> > >
> > > In the current tree I can only see one user of SerialPortLib and one
> > > of ChassisLib - but you are suggesting there will be several per
> > > platform? If so, A better splution may ne to consider wrapping
> > > DcfgRead32/DcfgWrite32 in a protocol instead of depending on the
> > > ChassisLib.
> >
> > The protocol would not be available in SEC and PEI phase.
>
> Fair.
>
> /
> Leif
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg
2020-04-23 10:31 ` Leif Lindholm
@ 2020-04-24 6:24 ` Pankaj Bansal
2020-04-24 11:43 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-24 6:24 UTC (permalink / raw)
To: Leif Lindholm, Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> ArmVirtPkg
>
> On Wed, Apr 15, 2020 at 17:43:39 +0530, Pankaj Bansal wrote:
> > From: Pankaj Bansal <pankaj.bansal@nxp.com>
> >
> > FVRules.fdf.inc is being replaced by the ArmVirtPkg/ArmVirtRules.fdf.inc
> > at commit hash 746c5b6238f1ee55deb4b3ec32a6d732e27eeeaa
>
> This is better - but why?
>
The intent is to remain as close as possible to reference platform, so that any future changes can be ported easily.
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib
2020-04-22 16:38 ` Leif Lindholm
@ 2020-04-24 6:53 ` Pankaj Bansal
2020-04-24 11:47 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Pankaj Bansal @ 2020-04-24 6:53 UTC (permalink / raw)
To: Leif Lindholm, Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
> > +/**
> > + Early init I2C for reading the sysclk from I2c slave device.
> > + I2c bus clock is determined from the clock input to I2c controller.
> > + The clock input to I2c controller is derived from the sysclk.
> > + sysclk is determined by clock generator, which is controller by i2c.
> > +
> > + So, it's a chicken-egg problem to read the sysclk from clock generator.
> > + To break this cycle (i.e. to read the sysclk), we setup the i2c bus clock to
> > + lowest value, in the hope that it won't be out of clock generator's supported
> > + i2c clock frequency. Once we have the correct sysclk, we can setup the
> > + correct i2c bus clock.
> > +
> > + @param[in] Base Base Address of I2c controller's registers
> > +
> > + @return EFI_SUCCESS successfuly setup the i2c bus for reading sysclk
> > +**/
> > +EFI_STATUS
> > +I2cEarlyInitialize (
> > + IN UINTN Base
> > + )
> > +{
> > + I2C_REGS *Regs;
> > + UINT8 Ibfd;
> > +
> > + Regs = (I2C_REGS *)Base;
> > + if (FeaturePcdGet (PcdI2cErratumA009203)) {
> > + // Apply Erratum A-009203 before writing Ibfd register
>
> It is an improvement, but there is still nothing in here that makes it
> obvious why this is being done twice. The referenced u-boot patch does
> it only once.
It's not necessary to call I2cEarlyInitialize for all I2c controllers.
This function has been written so that i2c bus can be initialized to read the system clock
from a clock generator or an FPFA.
To make a call to I2cInitialize, we need to know the I2cBusClock, which is a derivative of
System clock. I2cBusClock is calculated after PLL multiplication to system clock.
Therefore, we won't be able to call I2cInitialize without knowing System clock.
The idea is that for i2c controller to which clock generator or an FPFA is connected, we first
Call I2cEarlyInitialize. Then we read system clock and then we can call I2cInitialize for that
Controller as well as any other i2c controller(s) in the system.
So, for all i2c controllers (except one) I2cInitialize would be called and not I2cEarlyInitialize
>
> Hmm, furthermore, I don't see this function called at all? Why is it
> included? If you delete it (and its declaration in .h), I'm OK with
> the result.
>
> > + I2cErratumA009203 (Base);
> > + }
> > +
> > + if (MmioRead8 ((UINTN)&Regs->Ibdbg) & I2C_IBDBG_GLFLT_EN) {
> > + Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchEnabled).Ibfd;
> > + } else {
> > + Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchDisabled).Ibfd;
> > + }
> > +
> > + MmioWrite8 ((UINTN)&Regs->Ibfd, Ibfd);
> > +
> > + I2cReset (Base);
> > +
> > + return EFI_SUCCESS;
> > +}
> >
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg
2020-04-24 6:24 ` Pankaj Bansal
@ 2020-04-24 11:43 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-24 11:43 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Fri, Apr 24, 2020 at 06:24:55 +0000, Pankaj Bansal (OSS) wrote:
> > ArmVirtPkg
> >
> > On Wed, Apr 15, 2020 at 17:43:39 +0530, Pankaj Bansal wrote:
> > > From: Pankaj Bansal <pankaj.bansal@nxp.com>
> > >
> > > FVRules.fdf.inc is being replaced by the ArmVirtPkg/ArmVirtRules.fdf.inc
> > > at commit hash 746c5b6238f1ee55deb4b3ec32a6d732e27eeeaa
> >
> > This is better - but why?
> >
>
> The intent is to remain as close as possible to reference platform, so that any future changes can be ported easily.
Fair enough.
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib
2020-04-24 6:53 ` Pankaj Bansal
@ 2020-04-24 11:47 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-24 11:47 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Fri, Apr 24, 2020 at 06:53:15 +0000, Pankaj Bansal (OSS) wrote:
> > > +/**
> > > + Early init I2C for reading the sysclk from I2c slave device.
> > > + I2c bus clock is determined from the clock input to I2c controller.
> > > + The clock input to I2c controller is derived from the sysclk.
> > > + sysclk is determined by clock generator, which is controller by i2c.
> > > +
> > > + So, it's a chicken-egg problem to read the sysclk from clock generator.
> > > + To break this cycle (i.e. to read the sysclk), we setup the i2c bus clock to
> > > + lowest value, in the hope that it won't be out of clock generator's supported
> > > + i2c clock frequency. Once we have the correct sysclk, we can setup the
> > > + correct i2c bus clock.
> > > +
> > > + @param[in] Base Base Address of I2c controller's registers
> > > +
> > > + @return EFI_SUCCESS successfuly setup the i2c bus for reading sysclk
> > > +**/
> > > +EFI_STATUS
> > > +I2cEarlyInitialize (
> > > + IN UINTN Base
> > > + )
> > > +{
> > > + I2C_REGS *Regs;
> > > + UINT8 Ibfd;
> > > +
> > > + Regs = (I2C_REGS *)Base;
> > > + if (FeaturePcdGet (PcdI2cErratumA009203)) {
> > > + // Apply Erratum A-009203 before writing Ibfd register
> >
> > It is an improvement, but there is still nothing in here that makes it
> > obvious why this is being done twice. The referenced u-boot patch does
> > it only once.
>
> It's not necessary to call I2cEarlyInitialize for all I2c controllers.
> This function has been written so that i2c bus can be initialized to read the system clock
> from a clock generator or an FPFA.
>
> To make a call to I2cInitialize, we need to know the I2cBusClock, which is a derivative of
> System clock. I2cBusClock is calculated after PLL multiplication to system clock.
> Therefore, we won't be able to call I2cInitialize without knowing System clock.
>
> The idea is that for i2c controller to which clock generator or an FPFA is connected, we first
> Call I2cEarlyInitialize. Then we read system clock and then we can call I2cInitialize for that
> Controller as well as any other i2c controller(s) in the system.
>
> So, for all i2c controllers (except one) I2cInitialize would be called and not I2cEarlyInitialize
OK. So, I am OK with that as en end result, but since the function is
not used at all in this patchset, can it be purged from here and
introduced just before it is needed with a subsequent set?
That will make its intended use *much* more clear.
/
Leif
> >
> > Hmm, furthermore, I don't see this function called at all? Why is it
> > included? If you delete it (and its declaration in .h), I'm OK with
> > the result.
> >
> > > + I2cErratumA009203 (Base);
> > > + }
> > > +
> > > + if (MmioRead8 ((UINTN)&Regs->Ibdbg) & I2C_IBDBG_GLFLT_EN) {
> > > + Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchEnabled).Ibfd;
> > > + } else {
> > > + Ibfd = ARRAY_LAST_ELEM (mI2cClockDivisorGlitchDisabled).Ibfd;
> > > + }
> > > +
> > > + MmioWrite8 ((UINTN)&Regs->Ibfd, Ibfd);
> > > +
> > > + I2cReset (Base);
> > > +
> > > + return EFI_SUCCESS;
> > > +}
> > >
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-24 2:42 ` Pankaj Bansal
@ 2020-04-24 15:51 ` Leif Lindholm
2020-04-28 17:46 ` [edk2-devel] " Ard Biesheuvel
0 siblings, 1 reply; 54+ messages in thread
From: Leif Lindholm @ 2020-04-24 15:51 UTC (permalink / raw)
To: Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, devel@edk2.groups.io,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Fri, Apr 24, 2020 at 02:42:13 +0000, Pankaj Bansal (OSS) wrote:
> > > > Why would multiple modules need to initialize the serial port?
> > >
> > > That's how the DebugLib has been designed.
> > > DebugLib is used by all modules to print info on console.
> > > BaseDebugLibSerialPortConstructor calls SerialPortInitialize.
> > > So SerialPortInitialize is called by all the modules.
> >
> > Sure, but the bit where ChassisLib returns the active clock
> > configuration does not need to happen for each initialization.
> > That value can be cached.
>
> The only mechanism I know for passing a cached value between different modules
> is either use PCDs or use HOBs.
> We have already explored both in https://edk2.groups.io/g/devel/message/57254
> and https://edk2.groups.io/g/devel/message/56530
That was discussing what to do with regards to the generic 16550
driver. If we go with Laszlo's suggestion[1] for a separate
SerialUartClockLib instead of adding a vendor GUID HOB *into the
generic driver*, that does not preclude your using a HOB to cache the
value in your platform code for later use in your own
SerialUartClockLib implementation.
[1] https://edk2.groups.io/g/devel/message/56767
> Moreover the compiler can optimize the PcdDcfgBigEndian evaluation.
> So no overhead would be observed in evaluating PcdDcfgBigEndian in every call.
I don't question that, but that was always going to be the case anyway
- especially with LTO. The point is reducing code duplication -
especially for weird and wacky hardware workarounds.
/
Leif
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [edk2-devel] [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-24 15:51 ` Leif Lindholm
@ 2020-04-28 17:46 ` Ard Biesheuvel
2020-04-28 17:50 ` Leif Lindholm
0 siblings, 1 reply; 54+ messages in thread
From: Ard Biesheuvel @ 2020-04-28 17:46 UTC (permalink / raw)
To: devel, leif, Pankaj Bansal (OSS)
Cc: Meenakshi Aggarwal, Michael D Kinney, Varun Sethi,
Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On 4/24/20 5:51 PM, Leif Lindholm via groups.io wrote:
> On Fri, Apr 24, 2020 at 02:42:13 +0000, Pankaj Bansal (OSS) wrote:
>>>>> Why would multiple modules need to initialize the serial port?
>>>>
>>>> That's how the DebugLib has been designed.
>>>> DebugLib is used by all modules to print info on console.
>>>> BaseDebugLibSerialPortConstructor calls SerialPortInitialize.
>>>> So SerialPortInitialize is called by all the modules.
>>>
>>> Sure, but the bit where ChassisLib returns the active clock
>>> configuration does not need to happen for each initialization.
>>> That value can be cached.
>>
>> The only mechanism I know for passing a cached value between different modules
>> is either use PCDs or use HOBs.
>> We have already explored both in https://edk2.groups.io/g/devel/message/57254
>> and https://edk2.groups.io/g/devel/message/56530
>
> That was discussing what to do with regards to the generic 16550
> driver. If we go with Laszlo's suggestion[1] for a separate
> SerialUartClockLib instead of adding a vendor GUID HOB *into the
> generic driver*, that does not preclude your using a HOB to cache the
> value in your platform code for later use in your own
> SerialUartClockLib implementation.
>
> [1] https://edk2.groups.io/g/devel/message/56767
>
Caching using a HOB is a bit problematic, given that
SerialPortInitialize() does not honour constructor ordering (it may be
called before any of the constructors), and so whether we implement
Laszlo's suggestion or not, using a HOB to cache anything that is
required to set the correct baud rate is not going to work (given that
HobLib may rely on its constructor to be able to access the HOB list)
Unfortunately, that leaves us with little else, given that we cannot use
global variables either, since BASE libraries may be incorporated into
PEIMs that run execute-in-place from ROM.
So the bottom line is that we don't have that many options that are
actually feasible, and so converging on one of the non-optimal ones is
all that we can really hope for at this point.
>> Moreover the compiler can optimize the PcdDcfgBigEndian evaluation.
>> So no overhead would be observed in evaluating PcdDcfgBigEndian in every call.
>
> I don't question that, but that was always going to be the case anyway
> - especially with LTO. The point is reducing code duplication -
> especially for weird and wacky hardware workarounds.
>
Have to agree here :-)
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [edk2-devel] [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package
2020-04-28 17:46 ` [edk2-devel] " Ard Biesheuvel
@ 2020-04-28 17:50 ` Leif Lindholm
0 siblings, 0 replies; 54+ messages in thread
From: Leif Lindholm @ 2020-04-28 17:50 UTC (permalink / raw)
To: devel, ard.biesheuvel
Cc: Pankaj Bansal (OSS), Meenakshi Aggarwal, Michael D Kinney,
Varun Sethi, Samer El-Haj-Mahmoud, Jon Nettleton, Ard Biesheuvel
On Tue, Apr 28, 2020 at 19:46:36 +0200, Ard Biesheuvel wrote:
> On 4/24/20 5:51 PM, Leif Lindholm via groups.io wrote:
> > On Fri, Apr 24, 2020 at 02:42:13 +0000, Pankaj Bansal (OSS) wrote:
> > > > > > Why would multiple modules need to initialize the serial port?
> > > > >
> > > > > That's how the DebugLib has been designed.
> > > > > DebugLib is used by all modules to print info on console.
> > > > > BaseDebugLibSerialPortConstructor calls SerialPortInitialize.
> > > > > So SerialPortInitialize is called by all the modules.
> > > >
> > > > Sure, but the bit where ChassisLib returns the active clock
> > > > configuration does not need to happen for each initialization.
> > > > That value can be cached.
> > >
> > > The only mechanism I know for passing a cached value between different modules
> > > is either use PCDs or use HOBs.
> > > We have already explored both in https://edk2.groups.io/g/devel/message/57254
> > > and https://edk2.groups.io/g/devel/message/56530
> >
> > That was discussing what to do with regards to the generic 16550
> > driver. If we go with Laszlo's suggestion[1] for a separate
> > SerialUartClockLib instead of adding a vendor GUID HOB *into the
> > generic driver*, that does not preclude your using a HOB to cache the
> > value in your platform code for later use in your own
> > SerialUartClockLib implementation.
> >
> > [1] https://edk2.groups.io/g/devel/message/56767
> >
>
> Caching using a HOB is a bit problematic, given that SerialPortInitialize()
> does not honour constructor ordering (it may be called before any of the
> constructors), and so whether we implement Laszlo's suggestion or not, using
> a HOB to cache anything that is required to set the correct baud rate is not
> going to work (given that HobLib may rely on its constructor to be able to
> access the HOB list)
>
> Unfortunately, that leaves us with little else, given that we cannot use
> global variables either, since BASE libraries may be incorporated into PEIMs
> that run execute-in-place from ROM.
>
> So the bottom line is that we don't have that many options that are actually
> feasible, and so converging on one of the non-optimal ones is all that we
> can really hope for at this point.
Argh, OK. I hadn't tweaked this - so thanks for pointing it out.
OK, given that:
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
for this patch in its current state.
Just, please use a single call to set up the struct pointer for future
components where that is possible.
/
Leif
^ permalink raw reply [flat|nested] 54+ messages in thread
end of thread, other threads:[~2020-04-28 17:50 UTC | newest]
Thread overview: 54+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-15 12:13 [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 01/24] Silicon/NXP: Add I2c lib Pankaj Bansal
2020-04-22 16:38 ` Leif Lindholm
2020-04-24 6:53 ` Pankaj Bansal
2020-04-24 11:47 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 02/24] Silicon/NXP: changes to use I2clib in i2cdxe Pankaj Bansal
2020-04-22 16:41 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 03/24] Silicon/NXP/I2cDxe: Fix I2c Timeout with RTC Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 04/24] Silicon/Maxim: Fix bug in RtcWrite in Ds1307RtcLib Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 05/24] Silicon/Maxim: Add comments " Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 06/24] NXP/LS1043aRdb: Move Soc specific components to soc files Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc lib Pankaj Bansal
2020-04-22 16:51 ` [PATCH edk2-platforms v3 07/24] Silicon/NXP: remove print information from Soc Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 08/24] Silicon/NXP: remove not needed components Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 09/24] Silicon/NXP: Remove unnecessary PCDs Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 10/24] Silicon/NXP: Move dsc file Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 11/24] Platform/NXP: rename the ArmPlatformLib as per ArmPlatformPkg Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 12/24] Silicon/NXP: Move RAM retrieval from SocLib Pankaj Bansal
2020-04-23 9:15 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 13/24] Platform/NXP/LS1043aRdbPkg: Add Clock retrieval APIs Pankaj Bansal
2020-04-23 9:19 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 14/24] Silicon/NXP: Use Clock retrieval PPI in modules Pankaj Bansal
2020-04-23 9:25 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 15/24] Silicon: NXP: Remove direct calls to SwapMmio* APIs Pankaj Bansal
2020-04-23 9:27 ` Leif Lindholm
2020-04-23 10:11 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 16/24] Silicon/NXP: Add Chassis2 Package Pankaj Bansal
2020-04-23 10:27 ` Leif Lindholm
2020-04-23 11:38 ` Pankaj Bansal
2020-04-23 11:57 ` Leif Lindholm
2020-04-23 12:02 ` Pankaj Bansal
2020-04-23 12:05 ` Leif Lindholm
2020-04-23 13:41 ` Pankaj Bansal
2020-04-23 14:18 ` Leif Lindholm
2020-04-23 14:45 ` Pankaj Bansal
2020-04-23 15:26 ` Leif Lindholm
2020-04-24 2:42 ` Pankaj Bansal
2020-04-24 15:51 ` Leif Lindholm
2020-04-28 17:46 ` [edk2-devel] " Ard Biesheuvel
2020-04-28 17:50 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 17/24] Silicon/NXP/LS1043A: Use ChassisLib from Chassis2 Pkg Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 18/24] Silicon/NXP/LS1043A: Move SocLib to Soc Package Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 19/24] NXP/LS1043aRdbPkg/ArmPlatformLib: Remove extern SocInit Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 20/24] NXP: LS1043aRdbPkg: Use ArmPlatformHelper.S from ArmPlatformPkg Pankaj Bansal
2020-04-23 10:28 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 21/24] Platform/NXP: Use FV rules from ArmVirtPkg Pankaj Bansal
2020-04-23 10:31 ` Leif Lindholm
2020-04-24 6:24 ` Pankaj Bansal
2020-04-24 11:43 ` Leif Lindholm
2020-04-15 12:13 ` [PATCH edk2-platforms v3 22/24] Platform/NXP/LS1043aRdbPkg: Add VarStore Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 23/24] Silicon/NXP: move MemoryInitPeiLib as per PEIM structures Pankaj Bansal
2020-04-15 12:13 ` [PATCH edk2-platforms v3 24/24] Platform/NXP/LS1043aRdbPkg: Add PEI Phase Pankaj Bansal
2020-04-23 10:33 ` Leif Lindholm
2020-04-22 10:46 ` [PATCH edk2-platforms v3 00/24] Add PEI phase to LS1043ARDB Platform Leif Lindholm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox