From: "Oleksiy Yakovlev" <oleksiyy@ami.com>
To: <devel@edk2.groups.io>
Cc: <liming.gao@intel.com>, <michael.d.kinney@intel.com>,
<Felixp@ami.com>, <oleksiyy@ami.com>
Subject: [PATCH v2 2/4] MdePkg: Fix OUT parameters marked as IN OUT
Date: Thu, 7 May 2020 15:34:41 -0400 [thread overview]
Message-ID: <20200507193443.76728-3-oleksiyy@ami.com> (raw)
In-Reply-To: <20200507193443.76728-1-oleksiyy@ami.com>
Some output parameters throughout the specification were mistakenly marked as IN OUT.
"IN OUT" replaced with "OUT" in the following interfaces
EFI_BOOT_SERVICES.GetMemoryMap():MemoryMap
EFI_BOOT_SERVICES.LocateHandleBuffer():NoHandles
EFI_SIMPLE_POINTER_PROTOCOL.GetState():State
EFI_ABSOLUTE_POINTER_PROTOCOL.GetState():State
EFI_EDID_OVERRIDE_PROTOCOL.GetEdid():EdidSize and Edid
EFI_ATA_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_SD_MMC_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_EXT_SCSI_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():Image
(UEFI 2.8 errata a, mantis 2035)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
---
MdePkg/Include/Protocol/AbsolutePointer.h | 2 +-
MdePkg/Include/Protocol/AtaPassThru.h | 4 ++--
MdePkg/Include/Protocol/EdidOverride.h | 4 ++--
MdePkg/Include/Protocol/FirmwareManagement.h | 4 ++--
MdePkg/Include/Protocol/NvmExpressPassthru.h | 4 ++--
MdePkg/Include/Protocol/ScsiPassThruExt.h | 2 +-
MdePkg/Include/Protocol/SdMmcPassThru.h | 4 ++--
MdePkg/Include/Protocol/SimplePointer.h | 2 +-
MdePkg/Include/Uefi/UefiSpec.h | 8 ++++----
9 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/MdePkg/Include/Protocol/AbsolutePointer.h b/MdePkg/Include/Protocol/AbsolutePointer.h
index 77d34ae..d59ac97 100644
--- a/MdePkg/Include/Protocol/AbsolutePointer.h
+++ b/MdePkg/Include/Protocol/AbsolutePointer.h
@@ -169,7 +169,7 @@ typedef
EFI_STATUS
(EFIAPI *EFI_ABSOLUTE_POINTER_GET_STATE)(
IN EFI_ABSOLUTE_POINTER_PROTOCOL *This,
- IN OUT EFI_ABSOLUTE_POINTER_STATE *State
+ OUT EFI_ABSOLUTE_POINTER_STATE *State
);
diff --git a/MdePkg/Include/Protocol/AtaPassThru.h b/MdePkg/Include/Protocol/AtaPassThru.h
index ce6f57f..888dff2 100644
--- a/MdePkg/Include/Protocol/AtaPassThru.h
+++ b/MdePkg/Include/Protocol/AtaPassThru.h
@@ -315,7 +315,7 @@ EFI_STATUS
@param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
device path node is to be allocated and built. If there is no
port multiplier, then specify 0xFFFF.
- @param[in,out] DevicePath A pointer to a single device path node that describes the ATA
+ @param[out] DevicePath A pointer to a single device path node that describes the ATA
device specified by Port and PortMultiplierPort. This function
is responsible for allocating the buffer DevicePath with the
boot service AllocatePool(). It is the caller's responsibility
@@ -334,7 +334,7 @@ EFI_STATUS
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN UINT16 Port,
IN UINT16 PortMultiplierPort,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
diff --git a/MdePkg/Include/Protocol/EdidOverride.h b/MdePkg/Include/Protocol/EdidOverride.h
index 9036f8b..709ee48 100644
--- a/MdePkg/Include/Protocol/EdidOverride.h
+++ b/MdePkg/Include/Protocol/EdidOverride.h
@@ -44,8 +44,8 @@ EFI_STATUS
IN EFI_EDID_OVERRIDE_PROTOCOL *This,
IN EFI_HANDLE *ChildHandle,
OUT UINT32 *Attributes,
- IN OUT UINTN *EdidSize,
- IN OUT UINT8 **Edid
+ OUT UINTN *EdidSize,
+ OUT UINT8 **Edid
);
///
diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h b/MdePkg/Include/Protocol/FirmwareManagement.h
index 297bb5f..b501261 100644
--- a/MdePkg/Include/Protocol/FirmwareManagement.h
+++ b/MdePkg/Include/Protocol/FirmwareManagement.h
@@ -345,7 +345,7 @@ EFI_STATUS
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
- @param[in, out] Image Points to the buffer where the current image is copied to.
+ @param[out] Image Points to the buffer where the current image is copied to.
@param[in, out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -364,7 +364,7 @@ EFI_STATUS
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE)(
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN UINT8 ImageIndex,
- IN OUT VOID *Image,
+ OUT VOID *Image,
IN OUT UINTN *ImageSize
);
diff --git a/MdePkg/Include/Protocol/NvmExpressPassthru.h b/MdePkg/Include/Protocol/NvmExpressPassthru.h
index 7420924..870b9b5 100644
--- a/MdePkg/Include/Protocol/NvmExpressPassthru.h
+++ b/MdePkg/Include/Protocol/NvmExpressPassthru.h
@@ -214,7 +214,7 @@ EFI_STATUS
@param[in] NamespaceId The NVM Express namespace ID for which a device path node is to be
allocated and built. Caller must set the NamespaceId to zero if the
device path node will contain a valid UUID.
- @param[in,out] DevicePath A pointer to a single device path node that describes the NVM Express
+ @param[out] DevicePath A pointer to a single device path node that describes the NVM Express
namespace specified by NamespaceId. This function is responsible for
allocating the buffer DevicePath with the boot service AllocatePool().
It is the caller's responsibility to free DevicePath when the caller
@@ -231,7 +231,7 @@ EFI_STATUS
(EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_BUILD_DEVICE_PATH)(
IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This,
IN UINT32 NamespaceId,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
diff --git a/MdePkg/Include/Protocol/ScsiPassThruExt.h b/MdePkg/Include/Protocol/ScsiPassThruExt.h
index c83da26..994fbba 100644
--- a/MdePkg/Include/Protocol/ScsiPassThruExt.h
+++ b/MdePkg/Include/Protocol/ScsiPassThruExt.h
@@ -259,7 +259,7 @@ EFI_STATUS
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
diff --git a/MdePkg/Include/Protocol/SdMmcPassThru.h b/MdePkg/Include/Protocol/SdMmcPassThru.h
index 3db6a3e..ac5470b 100644
--- a/MdePkg/Include/Protocol/SdMmcPassThru.h
+++ b/MdePkg/Include/Protocol/SdMmcPassThru.h
@@ -164,7 +164,7 @@ EFI_STATUS
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card for which a device
path node is to be allocated and built.
- @param[in,out] DevicePath A pointer to a single device path node that describes the SD
+ @param[out] DevicePath A pointer to a single device path node that describes the SD
card specified by Slot. This function is responsible for
allocating the buffer DevicePath with the boot service
AllocatePool(). It is the caller's responsibility to free
@@ -182,7 +182,7 @@ EFI_STATUS
(EFIAPI *EFI_SD_MMC_PASS_THRU_BUILD_DEVICE_PATH) (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
diff --git a/MdePkg/Include/Protocol/SimplePointer.h b/MdePkg/Include/Protocol/SimplePointer.h
index 2f5a940..c631414 100644
--- a/MdePkg/Include/Protocol/SimplePointer.h
+++ b/MdePkg/Include/Protocol/SimplePointer.h
@@ -109,7 +109,7 @@ typedef
EFI_STATUS
(EFIAPI *EFI_SIMPLE_POINTER_GET_STATE)(
IN EFI_SIMPLE_POINTER_PROTOCOL *This,
- IN OUT EFI_SIMPLE_POINTER_STATE *State
+ OUT EFI_SIMPLE_POINTER_STATE *State
);
///
diff --git a/MdePkg/Include/Uefi/UefiSpec.h b/MdePkg/Include/Uefi/UefiSpec.h
index 444aa35..29a033c 100644
--- a/MdePkg/Include/Uefi/UefiSpec.h
+++ b/MdePkg/Include/Uefi/UefiSpec.h
@@ -209,7 +209,7 @@ EFI_STATUS
On output, it is the size of the buffer returned by the firmware if
the buffer was large enough, or the size of the buffer needed to contain
the map if the buffer was too small.
- @param[in, out] MemoryMap A pointer to the buffer in which firmware places the current memory
+ @param[out] MemoryMap A pointer to the buffer in which firmware places the current memory
map.
@param[out] MapKey A pointer to the location in which firmware returns the key for the
current memory map.
@@ -230,7 +230,7 @@ typedef
EFI_STATUS
(EFIAPI *EFI_GET_MEMORY_MAP)(
IN OUT UINTN *MemoryMapSize,
- IN OUT EFI_MEMORY_DESCRIPTOR *MemoryMap,
+ OUT EFI_MEMORY_DESCRIPTOR *MemoryMap,
OUT UINTN *MapKey,
OUT UINTN *DescriptorSize,
OUT UINT32 *DescriptorVersion
@@ -1554,7 +1554,7 @@ EFI_STATUS
@param[in] Protocol Provides the protocol to search by.
This parameter is only valid for a SearchType of ByProtocol.
@param[in] SearchKey Supplies the search key depending on the SearchType.
- @param[in, out] NoHandles The number of handles returned in Buffer.
+ @param[out] NoHandles The number of handles returned in Buffer.
@param[out] Buffer A pointer to the buffer to return the requested array of handles that
support Protocol.
@@ -1572,7 +1572,7 @@ EFI_STATUS
IN EFI_LOCATE_SEARCH_TYPE SearchType,
IN EFI_GUID *Protocol, OPTIONAL
IN VOID *SearchKey, OPTIONAL
- IN OUT UINTN *NoHandles,
+ OUT UINTN *NoHandles,
OUT EFI_HANDLE **Buffer
);
--
2.9.0.windows.1
Please consider the environment before printing this email.
The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission.
next prev parent reply other threads:[~2020-05-07 19:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-07 19:34 [PATCH v2 0/4] Add definitions introduced in UEFI 2.8a Oleksiy Yakovlev
2020-05-07 19:34 ` [PATCH v2 1/4] MdePkg: Add new CPER Notification types Oleksiy Yakovlev
2020-05-11 6:10 ` [edk2-devel] " Zhiguang Liu
2020-05-07 19:34 ` Oleksiy Yakovlev [this message]
2020-05-11 6:12 ` [edk2-devel] [PATCH v2 2/4] MdePkg: Fix OUT parameters marked as IN OUT Zhiguang Liu
2020-05-07 19:34 ` [PATCH v2 3/4] MdePkg: Add EFI_PROPERTIES_TABLE Oleksiy Yakovlev
2020-05-08 6:08 ` [edk2-devel] " Zhiguang Liu
2020-05-08 15:29 ` Oleksiy Yakovlev
2020-05-09 0:29 ` Zhiguang Liu
2020-05-11 14:41 ` Liming Gao
2020-05-07 19:34 ` [PATCH v2 4/4] MdePkg: Add FMP Capsule Image Header extension Oleksiy Yakovlev
2020-05-11 6:14 ` [edk2-devel] " Zhiguang Liu
2020-05-11 14:42 ` [PATCH v2 0/4] Add definitions introduced in UEFI 2.8a Liming Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200507193443.76728-3-oleksiyy@ami.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox