From: "Gary Lin" <glin@suse.com>
To: <devel@edk2.groups.io>, <ard.biesheuvel@arm.com>
Cc: <leif@nuviainc.com>, <lersek@redhat.com>, <liming.gao@intel.com>
Subject: Re: [edk2-devel] [PATCH v2] ArmPkg/CompilerIntrinsicsLib: provide atomics intrinsics
Date: Thu, 28 May 2020 09:36:33 +0800 [thread overview]
Message-ID: <20200528013633.GF24379@GaryWorkstation> (raw)
In-Reply-To: <20200520114448.26104-1-ard.biesheuvel@arm.com>
On Wed, May 20, 2020 at 01:44:48PM +0200, Ard Biesheuvel wrote:
> Gary reports the GCC 10 will emit calls to atomics intrinsics routines
> unless -mno-outline-atomics is specified. This means GCC-10 introduces
> new intrinsics, and even though it would be possible to work around this
> by specifying the command line option, this would require a new GCC10
> toolchain profile to be created, which we prefer to avoid.
>
> So instead, add the new intrinsics to our library so they are provided
> when necessary.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
After applying this patch, gcc 10 can build ArmVirtPkg without the
linking error.
Tested-by: Gary Lin <glin@suse.com>
> ---
> v2:
> - add missing .globl to export the functions from the object file
> - add function end markers so the size of each is visible in the ELF metadata
> - add some comments to describe what is going on
>
> ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf | 3 +
> ArmPkg/Library/CompilerIntrinsicsLib/AArch64/Atomics.S | 142 ++++++++++++++++++++
> 2 files changed, 145 insertions(+)
>
> diff --git a/ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf b/ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> index d5bad9467758..fcf48c678119 100644
> --- a/ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> +++ b/ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> @@ -79,6 +79,9 @@ [Sources.ARM]
> Arm/ldivmod.asm | MSFT
> Arm/llsr.asm | MSFT
>
> +[Sources.AARCH64]
> + AArch64/Atomics.S | GCC
> +
> [Packages]
> MdePkg/MdePkg.dec
> ArmPkg/ArmPkg.dec
> diff --git a/ArmPkg/Library/CompilerIntrinsicsLib/AArch64/Atomics.S b/ArmPkg/Library/CompilerIntrinsicsLib/AArch64/Atomics.S
> new file mode 100644
> index 000000000000..dc61d6bb8e52
> --- /dev/null
> +++ b/ArmPkg/Library/CompilerIntrinsicsLib/AArch64/Atomics.S
> @@ -0,0 +1,142 @@
> +#------------------------------------------------------------------------------
> +#
> +# Copyright (c) 2020, Arm, Limited. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#------------------------------------------------------------------------------
> +
> + /*
> + * Provide the GCC intrinsics that are required when using GCC 9 or
> + * later with the -moutline-atomics options (which became the default
> + * in GCC 10)
> + */
> + .arch armv8-a
> +
> + .macro reg_alias, pfx, sz
> + r0_\sz .req \pfx\()0
> + r1_\sz .req \pfx\()1
> + tmp0_\sz .req \pfx\()16
> + tmp1_\sz .req \pfx\()17
> + .endm
> +
> + /*
> + * Define register aliases of the right type for each size
> + * (xN for 8 bytes, wN for everything smaller)
> + */
> + reg_alias w, 1
> + reg_alias w, 2
> + reg_alias w, 4
> + reg_alias x, 8
> +
> + .macro fn_start, name:req
> + .section .text.\name
> + .globl \name
> + .type \name, %function
> +\name\():
> + .endm
> +
> + .macro fn_end, name:req
> + .size \name, . - \name
> + .endm
> +
> + /*
> + * Emit an atomic helper for \model with operands of size \sz, using
> + * the operation specified by \insn (which is the LSE name), and which
> + * can be implemented using the generic load-locked/store-conditional
> + * (LL/SC) sequence below, using the arithmetic operation given by
> + * \opc.
> + */
> + .macro emit_ld_sz, sz:req, insn:req, opc:req, model:req, s, a, l
> + fn_start __aarch64_\insn\()\sz\()\model
> + mov tmp0_\sz, r0_\sz
> +0: ld\a\()xr\s r0_\sz, [x1]
> + .ifnc \insn, swp
> + \opc tmp1_\sz, r0_\sz, tmp0_\sz
> + .else
> + \opc tmp1_\sz, tmp0_\sz
> + .endif
> + st\l\()xr\s w15, tmp1_\sz, [x1]
> + cbnz w15, 0b
> + ret
> + fn_end __aarch64_\insn\()\sz\()\model
> + .endm
> +
> + /*
> + * Emit atomic helpers for \model for operand sizes in the
> + * set {1, 2, 4, 8}, for the instruction pattern given by
> + * \insn. (This is the LSE name, but this implementation uses
> + * the generic LL/SC sequence using \opc as the arithmetic
> + * operation on the target.)
> + */
> + .macro emit_ld, insn:req, opc:req, model:req, a, l
> + emit_ld_sz 1, \insn, \opc, \model, b, \a, \l
> + emit_ld_sz 2, \insn, \opc, \model, h, \a, \l
> + emit_ld_sz 4, \insn, \opc, \model, , \a, \l
> + emit_ld_sz 8, \insn, \opc, \model, , \a, \l
> + .endm
> +
> + /*
> + * Emit the compare and swap helper for \model and size \sz
> + * using LL/SC instructions.
> + */
> + .macro emit_cas_sz, sz:req, model:req, uxt:req, s, a, l
> + fn_start __aarch64_cas\sz\()\model
> + \uxt tmp0_\sz, r0_\sz
> +0: ld\a\()xr\s r0_\sz, [x2]
> + cmp r0_\sz, tmp0_\sz
> + bne 1f
> + st\l\()xr\s w15, r1_\sz, [x2]
> + cbnz w15, 0b
> +1: ret
> + fn_end __aarch64_cas\sz\()\model
> + .endm
> +
> + /*
> + * Emit compare-and-swap helpers for \model for operand sizes in the
> + * set {1, 2, 4, 8, 16}.
> + */
> + .macro emit_cas, model:req, a, l
> + emit_cas_sz 1, \model, uxtb, b, \a, \l
> + emit_cas_sz 2, \model, uxth, h, \a, \l
> + emit_cas_sz 4, \model, mov , , \a, \l
> + emit_cas_sz 8, \model, mov , , \a, \l
> +
> + /*
> + * We cannot use the parameterized sequence for 16 byte CAS, so we
> + * need to define it explicitly.
> + */
> + fn_start __aarch64_cas16\model
> + mov x16, x0
> + mov x17, x1
> +0: ld\a\()xp x0, x1, [x4]
> + cmp x0, x16
> + ccmp x1, x17, #0, eq
> + bne 1f
> + st\l\()xp w15, x16, x17, [x4]
> + cbnz w15, 0b
> +1: ret
> + fn_end __aarch64_cas16\model
> + .endm
> +
> + /*
> + * Emit the set of GCC outline atomic helper functions for
> + * the memory ordering model given by \model:
> + * - relax unordered loads and stores
> + * - acq load-acquire, unordered store
> + * - rel unordered load, store-release
> + * - acq_rel load-acquire, store-release
> + */
> + .macro emit_model, model:req, a, l
> + emit_ld ldadd, add, \model, \a, \l
> + emit_ld ldclr, bic, \model, \a, \l
> + emit_ld ldeor, eor, \model, \a, \l
> + emit_ld ldset, orr, \model, \a, \l
> + emit_ld swp, mov, \model, \a, \l
> + emit_cas \model, \a, \l
> + .endm
> +
> + emit_model _relax
> + emit_model _acq, a
> + emit_model _rel,, l
> + emit_model _acq_rel, a, l
> --
> 2.17.1
>
>
>
>
next prev parent reply other threads:[~2020-05-28 1:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 11:44 [PATCH v2] ArmPkg/CompilerIntrinsicsLib: provide atomics intrinsics Ard Biesheuvel
2020-05-20 12:37 ` [edk2-devel] " Philippe Mathieu-Daudé
2020-05-21 16:40 ` Philippe Mathieu-Daudé
2020-05-21 16:45 ` Ard Biesheuvel
2020-05-21 16:59 ` Philippe Mathieu-Daudé
2020-05-21 17:02 ` Ard Biesheuvel
2020-05-21 17:07 ` Philippe Mathieu-Daudé
2020-05-20 15:59 ` Laszlo Ersek
2020-05-21 11:23 ` Leif Lindholm
2020-05-21 12:58 ` [edk2-devel] " Ard Biesheuvel
2020-05-21 13:16 ` Leif Lindholm
2020-05-21 13:31 ` Ard Biesheuvel
2020-05-21 14:16 ` Leif Lindholm
2020-05-21 20:22 ` Laszlo Ersek
2020-05-22 8:16 ` Ard Biesheuvel
2020-05-22 10:54 ` Leif Lindholm
2020-05-22 13:27 ` Ard Biesheuvel
2020-05-22 19:04 ` Laszlo Ersek
2020-06-02 0:50 ` Liming Gao
2020-06-02 7:09 ` Ard Biesheuvel
2020-05-28 1:36 ` Gary Lin [this message]
2020-05-28 9:49 ` Leif Lindholm
2020-05-28 15:48 ` Liming Gao
2020-05-28 20:09 ` Laszlo Ersek
2020-05-29 3:04 ` Liming Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200528013633.GF24379@GaryWorkstation \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox