From: "Pankaj Bansal" <pankaj.bansal@nxp.com>
To: Leif Lindholm <leif@nuviainc.com>,
Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>,
Michael D Kinney <michael.d.kinney@intel.com>,
devel@edk2.groups.io, Varun Sethi <V.Sethi@nxp.com>,
Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>,
Jon Nettleton <jon@solid-run.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH edk2-platforms v3 10/10] Platform/NXP/LX2160aRdbPkg: Add VarStore
Date: Fri, 29 May 2020 11:21:49 +0530 [thread overview]
Message-ID: <20200529055149.30953-11-pankaj.bansal@oss.nxp.com> (raw)
In-Reply-To: <20200529055149.30953-1-pankaj.bansal@oss.nxp.com>
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Add VarStore Fd. This Fd is used to store non volatile variables in
flash.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
---
Notes:
V3:
- No change
V2:
- No change
Platform/NXP/LX2160aRdbPkg/LX2160aRdbPkg.fdf | 1 +
Platform/NXP/LX2160aRdbPkg/VarStore.fdf.inc | 91 ++++++++++++++++++++
2 files changed, 92 insertions(+)
diff --git a/Platform/NXP/LX2160aRdbPkg/LX2160aRdbPkg.fdf b/Platform/NXP/LX2160aRdbPkg/LX2160aRdbPkg.fdf
index 19d2ca9bbe58..eec1c0774a86 100644
--- a/Platform/NXP/LX2160aRdbPkg/LX2160aRdbPkg.fdf
+++ b/Platform/NXP/LX2160aRdbPkg/LX2160aRdbPkg.fdf
@@ -48,6 +48,7 @@ gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
!include Platform/NXP/FVRules.fdf.inc
+!include VarStore.fdf.inc
################################################################################
#
# FV Section
diff --git a/Platform/NXP/LX2160aRdbPkg/VarStore.fdf.inc b/Platform/NXP/LX2160aRdbPkg/VarStore.fdf.inc
new file mode 100644
index 000000000000..799eee87193f
--- /dev/null
+++ b/Platform/NXP/LX2160aRdbPkg/VarStore.fdf.inc
@@ -0,0 +1,91 @@
+## @file
+# FDF include file with FD definition that defines an empty variable store.
+#
+# Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.
+# Copyright (C) 2014, Red Hat, Inc.
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.
+# Copyright (c) 2016, Freescale Semiconductor. All rights reserved.
+# Copyright 2017-2020 NXP
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[FD.LX2160aRdbNv_EFI]
+BaseAddress = 0x20500000 #The base address of the FLASH device
+Size = 0x000C0000 #The size in bytes of the FLASH device
+ErasePolarity = 1
+BlockSize = 0x1000
+NumBlocks = 0xC0
+
+#
+# Place NV Storage just above Platform Data Base
+#
+DEFINE NVRAM_AREA_VARIABLE_BASE = 0x00000000
+DEFINE NVRAM_AREA_VARIABLE_SIZE = 0x00040000
+DEFINE FTW_WORKING_BASE = $(NVRAM_AREA_VARIABLE_BASE) + $(NVRAM_AREA_VARIABLE_SIZE)
+DEFINE FTW_WORKING_SIZE = 0x00040000
+DEFINE FTW_SPARE_BASE = $(FTW_WORKING_BASE) + $(FTW_WORKING_SIZE)
+DEFINE FTW_SPARE_SIZE = 0x00040000
+
+#############################################################################
+# LX2160ARDB NVRAM Area
+# LX2160ARDB NVRAM Area contains: Variable + FTW Working + FTW Spare
+#############################################################################
+
+
+$(NVRAM_AREA_VARIABLE_BASE)|$(NVRAM_AREA_VARIABLE_SIZE)
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+#NV_VARIABLE_STORE
+DATA = {
+ ## This is the EFI_FIRMWARE_VOLUME_HEADER
+ # ZeroVector []
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ # FileSystemGuid: gEfiSystemNvDataFvGuid =
+ # { 0xFFF12B8D, 0x7696, 0x4C8B,
+ # { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
+ # FvLength: Flash Size : 0x4000000
+ 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
+ # Signature "_FVH" # Attributes
+ 0x5f, 0x46, 0x56, 0x48, 0x36, 0x0E, 0x00, 0x00,
+ # HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision
+ 0x48, 0x00, 0x08, 0xA6, 0x00, 0x00, 0x00, 0x02,
+ # Blockmap[0]: 0x4000 Blocks * 0x1000 Bytes / Block = SIZE_64MB
+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
+ # Blockmap[1]: End
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ ## This is the VARIABLE_STORE_HEADER
+ # It is compatible with SECURE_BOOT_ENABLE == FALSE as well.
+ # Signature: gEfiVariableGuid =
+ # { 0xddcf3616, 0x3275, 0x4164,
+ # { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
+ 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
+ 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
+ # Size: 0x40000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
+ # 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x3ffb8
+ # This can speed up the Variable Dispatch a bit.
+ 0xB8, 0xFF, 0x03, 0x00,
+ # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
+ 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+$(FTW_WORKING_BASE)|$(FTW_WORKING_SIZE)
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+#NV_FTW_WORKING
+DATA = {
+ # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
+ # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
+ 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
+ 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
+ # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
+ 0x5b, 0xe7, 0xc6, 0x86, 0xFE, 0xFF, 0xFF, 0xFF,
+ # WriteQueueSize: UINT64
+ 0xE0, 0xFF, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00
+}
+
+$(FTW_SPARE_BASE)|$(FTW_SPARE_SIZE)
+gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+#NV_FTW_SPARE
--
2.17.1
prev parent reply other threads:[~2020-05-29 5:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-29 5:51 [PATCH edk2-platforms v3 00/10] Add LX2160ARDB Platform Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 01/10] Silicon/NXP: Use Metronome implementation from MdeModulePkg Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 02/10] Platform/NXP: Use Monotonic counter " Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 03/10] Silicon/NXP/PciHostBridgeLib: Fix compilation with MDEPKG_NDEBUG flag Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 04/10] Silicon/NXP: Use edk2 recommended compilation flags Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 05/10] Platform/NXP/LX2160ARDB: Add ArmPlatformLib Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 06/10] Silicon/NXP: Implement PL011UartClockLib for NXP platforms Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 07/10] Silicon/NXP: Add Chassis3V2 Package Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 08/10] Silicon/NXP: Add LX2160A Soc package Pankaj Bansal
2020-05-29 5:51 ` [PATCH edk2-platforms v3 09/10] Platform/NXP: Add LX2160ARDB Platform Pankaj Bansal
2020-05-29 5:51 ` Pankaj Bansal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200529055149.30953-11-pankaj.bansal@oss.nxp.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox