From: "Tan, Ming" <ming.tan@intel.com>
To: devel@edk2.groups.io
Cc: Eric Dong <eric.dong@intel.com>, Liming Gao <liming.gao@intel.com>
Subject: [PATCH] Features/Intel/PostCodeDebugFeaturePkg: add it.
Date: Wed, 10 Jun 2020 14:31:20 +0800 [thread overview]
Message-ID: <20200610063120.23522-1-ming.tan@intel.com> (raw)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2478
The PostCodeDebugFeaturePkg include some useful post code debug
libraries, such as get post code from status code and show it.
It provide a library PostCodeStatusCodeHandlerLib used by edk2
StatusCodeHandler.efi, used to show the post code.
It also provide a library of PostCodeMap lib, it map the status code
to post code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ming Tan <ming.tan@intel.com>
---
.../Include/Library/PostCodeMapLib.h | 32 +++
.../Include/PostCodeDebugFeature.dsc | 184 ++++++++++++
.../PlatformStatusCodesInternal.h | 270 ++++++++++++++++++
.../Library/PostCodeMapLib/PostCodeMapLib.c | 207 ++++++++++++++
.../Library/PostCodeMapLib/PostCodeMapLib.inf | 28 ++
.../PeiPostCodeStatusCodeHandlerLib.c | 102 +++++++
.../PeiPostCodeStatusCodeHandlerLib.inf | 52 ++++
.../RuntimeDxePostCodeStatusCodeHandlerLib.c | 183 ++++++++++++
...RuntimeDxePostCodeStatusCodeHandlerLib.inf | 57 ++++
.../SmmPostCodeStatusCodeHandlerLib.c | 138 +++++++++
.../SmmPostCodeStatusCodeHandlerLib.inf | 55 ++++
.../PostCodeDebugFeaturePkg.dec | 30 ++
.../PostCodeDebugFeaturePkg.dsc | 30 ++
.../PostCodeDebugFeaturePkg/Readme.md | 118 ++++++++
14 files changed, 1486 insertions(+)
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/Library/PostCodeMapLib.h
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/PostCodeDebugFeature.dsc
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PlatformStatusCodesInternal.h
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.c
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.inf
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.c
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.inf
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.c
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.inf
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.c
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.inf
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dsc
create mode 100644 Features/Intel/Debugging/PostCodeDebugFeaturePkg/Readme.md
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/Library/PostCodeMapLib.h b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/Library/PostCodeMapLib.h
new file mode 100644
index 0000000000..834be623a1
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/Library/PostCodeMapLib.h
@@ -0,0 +1,32 @@
+/** @file
+ This library class provides Platform PostCode Map.
+
+ Copyright (c) 2011 - 2020, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __POST_CODE_MAP_LIB__
+#define __POST_CODE_MAP_LIB__
+
+/**
+ Get PostCode from status code type and value.
+
+ @param CodeType Indicates the type of status code being reported.
+ @param Value Describes the current status of a hardware or
+ software entity. This includes information about the class and
+ subclass that is used to classify the entity as well as an operation.
+ For progress codes, the operation is the current activity.
+ For error codes, it is the exception.For debug codes,it is not defined at this time.
+
+ @return PostCode
+
+**/
+UINT32
+EFIAPI
+GetPostCodeFromStatusCode (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value
+ );
+
+#endif
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/PostCodeDebugFeature.dsc b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/PostCodeDebugFeature.dsc
new file mode 100644
index 0000000000..e5bc8f1bb7
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Include/PostCodeDebugFeature.dsc
@@ -0,0 +1,184 @@
+## @file
+# This package provides PostCode Debug feature.
+# This file should be included into another package DSC file to build this feature.
+#
+# The DEC files are used by the utilities that parse DSC and
+# INF files to generate AutoGen.c and AutoGen.h files
+# for the build infrastructure.
+#
+# Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+!ifndef $(PEI_ARCH)
+ !error "PEI_ARCH must be specified to build this feature!"
+!endif
+!ifndef $(DXE_ARCH)
+ !error "DXE_ARCH must be specified to build this feature!"
+!endif
+
+################################################################################
+#
+# PCD Section - list of PCD Entries modified by the feature.
+#
+################################################################################
+[PcdsDynamicDefault]
+ gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode|TRUE
+
+################################################################################
+#
+# Library Class section - list of all Library Classes needed by this feature.
+#
+################################################################################
+[LibraryClasses]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ TimerLib|MdePkg/Library/BaseTimerLibNullTemplate/BaseTimerLibNullTemplate.inf
+ UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+ UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ SerialPortLib|MdePkg/Library/BaseSerialPortLibNull/BaseSerialPortLibNull.inf
+
+ PostCodeLib|MdePkg/Library/BasePostCodeLibDebug/BasePostCodeLibDebug.inf
+
+ #######################################
+ # PostCode Debug Feature Package
+ #######################################
+ PostCodeMapLib|PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.inf
+
+[LibraryClasses.common.PEIM]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLibIdt/PeiServicesTablePointerLibIdt.inf
+
+[LibraryClasses.IA32.PEIM,LibraryClasses.IA32.PEI_CORE,LibraryClasses.IA32.SEC]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/RuntimeDxeReportStatusCodeLib/RuntimeDxeReportStatusCodeLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.X64.DXE_SMM_DRIVER]
+ #######################################
+ # Edk2 Packages
+ #######################################
+ SmmServicesTableLib|MdePkg/Library/SmmServicesTableLib/SmmServicesTableLib.inf
+ MemoryAllocationLib|MdePkg/Library/SmmMemoryAllocationLib/SmmMemoryAllocationLib.inf
+ SmmIoLib|MdePkg/Library/SmmIoLib/SmmIoLib.inf
+ SmmMemLib|MdePkg/Library/SmmMemLib/SmmMemLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/SmmReportStatusCodeLib/SmmReportStatusCodeLib.inf
+
+################################################################################
+#
+# Component section - list of all components that need built for this feature.
+#
+# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
+# into firmware volume images. This section is just a list of modules to compile from
+# source into UEFI-compliant binaries.
+# It is the FDF file that contains information on combining binary files into firmware
+# volume images, whose concept is beyond UEFI and is described in PI specification.
+# There may also be modules listed in this section that are not required in the FDF file,
+# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
+# generated for it, but the binary will not be put into any firmware volume.
+#
+################################################################################
+#
+# Feature PEI Components
+#
+
+# @todo: Change below line to [Components.$(PEI_ARCH)] after https://bugzilla.tianocore.org/show_bug.cgi?id=2308
+# is completed.
+[Components.IA32]
+ #####################################
+ # PostCode Debug Feature Package
+ #####################################
+
+ MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf {
+ <LibraryClasses>
+ NULL|PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.inf
+ }
+
+ # Add components here that should be included in the package build.
+
+#
+# Feature DXE Components
+#
+
+# @todo: Change below line to [Components.$(DXE_ARCH)] after https://bugzilla.tianocore.org/show_bug.cgi?id=2308
+# is completed.
+[Components.X64]
+ #####################################
+ # PostCode Debug Feature Package
+ #####################################
+
+ MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.inf
+ }
+
+ MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCodeHandlerSmm.inf {
+ <LibraryClasses>
+ NULL|PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.inf
+ }
+
+ # Add components here that should be included in the package build.
+
+###################################################################################################
+#
+# BuildOptions Section - Define the module specific tool chain flags that should be used as
+# the default flags for a module. These flags are appended to any
+# standard flags that are defined by the build process. They can be
+# applied for any modules or only those modules with the specific
+# module style (EDK or EDKII) specified in [Components] section.
+#
+# For advanced features, it is recommended to enable [BuildOptions] in
+# the applicable INF file so it does not affect the whole board package
+# build when this DSC file is active.
+#
+###################################################################################################
+[BuildOptions]
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PlatformStatusCodesInternal.h b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PlatformStatusCodesInternal.h
new file mode 100644
index 0000000000..7c8daf052d
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PlatformStatusCodesInternal.h
@@ -0,0 +1,270 @@
+/** @file
+ PostCode status code definition.
+
+ Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __PLATFORM_STATUS_CODES_INTERNAL_H__
+#define __PLATFORM_STATUS_CODES_INTERNAL_H__
+
+#include <Pi/PiStatusCode.h>
+
+typedef struct{
+ EFI_STATUS_CODE_VALUE Value;
+ UINT32 Data;
+} STATUS_CODE_TO_DATA_MAP;
+
+//
+// Enable PEI/DXE status code
+//
+#define PEI_STATUS_CODE 1
+#define DXE_STATUS_CODE 1
+
+#define STATUS_CODE_TYPE(Type) ((Type)&EFI_STATUS_CODE_TYPE_MASK)
+#define STATUS_CODE_CLASS(Value) ((Value)&EFI_STATUS_CODE_CLASS_MASK)
+
+//Progress/Error codes
+#define PEI_CORE_STARTED (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_CORE_PC_ENTRY_POINT)
+#define PEI_RESET_NOT_AVAILABLE (EFI_SOFTWARE_PEI_CORE | EFI_SW_PS_EC_RESET_NOT_AVAILABLE)
+#define PEI_DXEIPL_NOT_FOUND (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_CORE_EC_DXEIPL_NOT_FOUND)
+#define PEI_DXE_CORE_NOT_FOUND (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_CORE_EC_DXE_CORRUPT)
+#define PEI_S3_RESUME_ERROR (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_EC_S3_RESUME_FAILED)
+#define PEI_RECOVERY_FAILED (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_EC_RECOVERY_FAILED)
+#define DXE_CORE_STARTED (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_ENTRY_POINT)
+
+//#define DXE_EXIT_BOOT_SERVICES_BEGIN 0xF8
+#define DXE_EXIT_BOOT_SERVICES_END (EFI_SOFTWARE_EFI_BOOT_SERVICE | EFI_SW_BS_PC_EXIT_BOOT_SERVICES)
+
+// Reported by CPU PEIM
+#define PEI_CAR_CPU_INIT (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_PC_POWER_ON_INIT)
+
+// Reported by NB PEIM
+//#define PEI_CAR_NB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CU_CHIPSET_NORTH_INIT)
+
+// Reported by SB PEIM
+//#define PEI_CAR_SB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CU_CHIPSET_PC_SOUTH_INIT)
+
+//Reported by Memory Detection PEIM
+#define PEI_MEMORY_SPD_READ (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_SPD_READ)
+#define PEI_MEMORY_PRESENCE_DETECT (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_PRESENCE_DETECT)
+#define PEI_MEMORY_TIMING (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_TIMING)
+#define PEI_MEMORY_CONFIGURING (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_CONFIGURING)
+#define PEI_MEMORY_OPTIMIZING (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_OPTIMIZING)
+#define PEI_MEMORY_INIT (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_INIT)
+#define PEI_MEMORY_TEST (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_PC_TEST)
+#define PEI_MEMORY_INVALID_TYPE (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_INVALID_TYPE)
+#define PEI_MEMORY_INVALID_SPEED (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_INVALID_SPEED)
+#define PEI_MEMORY_SPD_FAIL (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_SPD_FAIL)
+#define PEI_MEMORY_INVALID_SIZE (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_INVALID_SIZE)
+#define PEI_MEMORY_MISMATCH (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_MISMATCH)
+#define PEI_MEMORY_S3_RESUME_FAILED (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_S3_RESUME_FAIL)
+#define PEI_MEMORY_NOT_DETECTED (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_NONE_DETECTED)
+#define PEI_MEMORY_NONE_USEFUL (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_NONE_USEFUL)
+#define PEI_MEMORY_ERROR (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_EC_NON_SPECIFIC)
+#define PEI_MEMORY_INSTALLED (EFI_SOFTWARE_PEI_SERVICE | EFI_SW_PS_PC_INSTALL_PEI_MEMORY)
+#define PEI_MEMORY_NOT_INSTALLED (EFI_SOFTWARE_PEI_SERVICE | EFI_SW_PEI_CORE_EC_MEMORY_NOT_INSTALLED)
+#define PEI_MEMORY_INSTALLED_TWICE (EFI_SOFTWARE_PEI_SERVICE | EFI_SW_PS_EC_MEMORY_INSTALLED_TWICE)
+
+//Reported by CPU PEIM
+#define PEI_CPU_INIT (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_PC_INIT_BEGIN)
+#define PEI_CPU_CACHE_INIT (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_PC_CACHE_INIT)
+#define PEI_CPU_BSP_SELECT (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_PC_BSP_SELECT)
+#define PEI_CPU_AP_INIT (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_PC_AP_INIT)
+#define PEI_CPU_SMM_INIT (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_PC_SMM_INIT)
+#define PEI_CPU_INVALID_TYPE (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_INVALID_TYPE)
+#define PEI_CPU_INVALID_SPEED (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_INVALID_SPEED)
+#define PEI_CPU_MISMATCH (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_MISMATCH)
+#define PEI_CPU_SELF_TEST_FAILED (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_SELF_TEST)
+#define PEI_CPU_CACHE_ERROR (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_CACHE)
+#define PEI_CPU_MICROCODE_UPDATE_FAILED (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_MICROCODE_UPDATE)
+#define PEI_CPU_NO_MICROCODE (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_NO_MICROCODE_UPDATE)
+//If non of the errors above apply use this one
+#define PEI_CPU_INTERNAL_ERROR (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_INTERNAL)
+//Generic CPU error. It should only be used if non of the errors above apply
+#define PEI_CPU_ERROR (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_EC_NON_SPECIFIC)
+
+// Reported by NB PEIM
+#define PEI_MEM_NB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_PEI_MEM_NB_INIT)
+// Reported by SB PEIM
+#define PEI_MEM_SB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_PEI_MEM_SB_INIT)
+
+//Reported by PEIM which detected forced or auto recovery condition
+#define PEI_RECOVERY_AUTO (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_RECOVERY_AUTO)
+#define PEI_RECOVERY_USER (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_RECOVERY_USER)
+
+//Reported by DXE IPL
+#define PEI_RECOVERY_PPI_NOT_FOUND (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_RECOVERY_PPI_NOT_FOUND)
+#define PEI_S3_RESUME_PPI_NOT_FOUND (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_S3_RESUME_PPI_NOT_FOUND)
+#define PEI_S3_RESUME_FAILED (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_S3_RESUME_FAILED)
+
+//Reported by Recovery PEIM
+#define PEI_RECOVERY_STARTED (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_RECOVERY_BEGIN)
+#define PEI_RECOVERY_CAPSULE_FOUND (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_CAPSULE_LOAD)
+#define PEI_RECOVERY_NO_CAPSULE (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_NO_RECOVERY_CAPSULE)
+#define PEI_RECOVERY_CAPSULE_LOADED (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_CAPSULE_START)
+#define PEI_RECOVERY_INVALID_CAPSULE (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_INVALID_CAPSULE_DESCRIPTOR)
+
+//Reported by S3 Resume PEIM
+#define PEI_S3_BOOT_SCRIPT (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_S3_BOOT_SCRIPT)
+#define PEI_S3_OS_WAKE (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_OS_WAKE)
+#define PEI_S3_BOOT_SCRIPT_ERROR (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_S3_BOOT_SCRIPT_ERROR)
+#define PEI_S3_OS_WAKE_ERROR (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_S3_OS_WAKE_ERROR)
+
+#define PEI_PEIM_STARTED (EFI_SOFTWARE_PEI_CORE | EFI_SW_PC_INIT_BEGIN)
+#define PEI_PEIM_ENDED (EFI_SOFTWARE_PEI_CORE | EFI_SW_PC_INIT_END)
+
+//Reported by DXE IPL
+#define PEI_DXE_IPL_STARTED (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_CORE_PC_HANDOFF_TO_NEXT)
+
+//Reported by PEIM which installs Reset PPI
+#define PEI_RESET_SYSTEM (EFI_SOFTWARE_PEI_SERVICE | EFI_SW_PS_PC_RESET_SYSTEM)
+
+//Reported by the PEIM or DXE driver which detected the error
+#define GENERIC_MEMORY_CORRECTABLE_ERROR (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_CORRECTABLE)
+#define GENERIC_MEMORY_UNCORRECTABLE_ERROR (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_UNCORRECTABLE)
+
+//Reported by Flash Update DXE driver
+#define DXE_FLASH_UPDATE_FAILED (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_UPDATE_FAIL)
+
+//Reported by the PEIM or DXE driver which detected the error
+#define GENERIC_CPU_THERMAL_ERROR (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_THERMAL)
+#define GENERIC_CPU_LOW_VOLTAGE (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_LOW_VOLTAGE)
+#define GENERIC_CPU_HIGH_VOLTAGE (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_HIGH_VOLTAGE)
+#define GENERIC_CPU_CORRECTABLE_ERROR (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_CORRECTABLE)
+#define GENERIC_CPU_UNCORRECTABLE_ERROR (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_UNCORRECTABLE)
+#define GENERIC_BAD_DATE_TIME_ERROR (EFI_SOFTWARE_UNSPECIFIED | EFI_SW_EC_BAD_DATE_TIME)
+#define GENERIC_MEMORY_SIZE_DECREASE (EFI_COMPUTING_UNIT_MEMORY | EFI_CU_MEMORY_EC_MISMATCH)
+
+//Reported by DXE Core
+#define DXE_DRIVER_STARTED (EFI_SOFTWARE_EFI_DXE_SERVICE | EFI_SW_PC_INIT_BEGIN)
+#define DXE_DRIVER_ENED (EFI_SOFTWARE_DXE_CORE | EFI_SW_PC_INIT_END)
+#define DXE_ARCH_PROTOCOLS_AVAILABLE (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_ARCH_READY)
+#define DXE_DRIVER_CONNECTED (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_START_DRIVER)
+#define DXE_ARCH_PROTOCOL_NOT_AVAILABLE (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_EC_NO_ARCH)
+
+//Reported by DXE CPU driver
+#define DXE_CPU_SELF_TEST_FAILED (EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_SELF_TEST)
+
+//Reported by PCI Host Bridge driver
+#define DXE_NB_HB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_HB_INIT )
+
+// Reported by NB Driver
+#define DXE_NB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_NB_INIT )
+#define DXE_NB_SMM_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_NB_SMM_INIT )
+#define DXE_NB_ERROR (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_EC_DXE_NB_ERROR )
+
+// Reported by SB Driver(s)
+#define DXE_SBRUN_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_SB_RT_INIT )
+#define DXE_SB_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_SB_INIT )
+#define DXE_SB_SMM_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_SB_SMM_INIT )
+#define DXE_SB_DEVICES_INIT (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_PC_DXE_SB_DEVICES_INIT )
+#define DXE_SB_BAD_BATTERY (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_EC_BAD_BATTERY)
+#define DXE_SB_ERROR (EFI_COMPUTING_UNIT_CHIPSET | EFI_CHIPSET_EC_DXE_SB_ERROR )
+
+//Reported by DXE Core
+#define DXE_BDS_STARTED (EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_HANDOFF_TO_NEXT)
+
+//Reported by BDS
+//#define DXE_BDS_CONNECT_DRIVERS (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_BEGIN_CONNECTING_DRIVERS)
+
+//Reported by Boot Manager
+#define DXE_READY_TO_BOOT (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT)
+
+//Reported by DXE Core
+#define DXE_EXIT_BOOT_SERVICES (EFI_SOFTWARE_EFI_BOOT_SERVICE | EFI_SW_BS_PC_EXIT_BOOT_SERVICES)
+#define DXE_EXIT_BOOT_SERVICES_EVENT (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_EXIT_BOOT_SERVICES_EVENT)
+
+//Reported by driver that installs Runtime AP
+#define RT_SET_VIRTUAL_ADDRESS_MAP_BEGIN (EFI_SOFTWARE_EFI_RUNTIME_SERVICE | EFI_SW_RS_PC_SET_VIRTUAL_ADDRESS_MAP)
+#define RT_SET_VIRTUAL_ADDRESS_MAP_END (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_VIRTUAL_ADDRESS_CHANGE_EVENT)
+
+//Reported by CSM
+#define DXE_LEGACY_OPROM_INIT (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_LEGACY_OPROM_INIT)
+#define DXE_LEGACY_BOOT (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_LEGACY_BOOT_EVENT)
+#define DXE_LEGACY_OPROM_NO_SPACE (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_EC_LEGACY_OPROM_NO_SPACE)
+
+//Reported by SETUP
+//#define DXE_SETUP_VERIFYING_PASSWORD (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_PC_VERIFYING_PASSWORD)
+#define DXE_SETUP_START (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_PC_USER_SETUP)
+#define DXE_SETUP_INPUT_WAIT (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_PC_INPUT_WAIT)
+#define DXE_INVALID_PASSWORD (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_EC_INVALID_PASSWORD)
+#define DXE_INVALID_IDE_PASSWORD (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_EC_INVALID_IDE_PASSWORD)
+#define DXE_BOOT_OPTION_LOAD_ERROR (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_EC_BOOT_OPTION_LOAD_ERROR)
+#define DXE_BOOT_OPTION_FAILED (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_DXE_BS_EC_BOOT_OPTION_FAILED)
+
+//Reported by a Driver that installs Reset AP
+#define DXE_RESET_SYSTEM (EFI_SOFTWARE_EFI_RUNTIME_SERVICE | EFI_SW_RS_PC_RESET_SYSTEM)
+#define DXE_RESET_NOT_AVAILABLE (EFI_SOFTWARE_EFI_RUNTIME_SERVICE | EFI_SW_PS_EC_RESET_NOT_AVAILABLE)
+
+// Reported by PCI bus driver
+#define DXE_PCI_BUS_BEGIN (EFI_IO_BUS_PCI | EFI_IOB_PC_INIT)
+#define DXE_PCI_BUS_ENUM (EFI_IO_BUS_PCI | EFI_IOB_PCI_BUS_ENUM)
+#define DXE_PCI_BUS_HPC_INIT (EFI_IO_BUS_PCI | EFI_IOB_PCI_HPC_INIT)
+#define DXE_PCI_BUS_REQUEST_RESOURCES (EFI_IO_BUS_PCI | EFI_IOB_PCI_RES_ALLOC)
+#define DXE_PCI_BUS_ASSIGN_RESOURCES (EFI_IO_BUS_PCI | EFI_IOB_PC_ENABLE)
+#define DXE_PCI_BUS_HOTPLUG (EFI_IO_BUS_PCI | EFI_IOB_PC_HOTPLUG)
+#define DXE_PCI_BUS_OUT_OF_RESOURCES (EFI_IO_BUS_PCI | EFI_IOB_EC_RESOURCE_CONFLICT)
+
+// Reported by USB bus driver
+#define DXE_USB_BEGIN (EFI_IO_BUS_USB | EFI_IOB_PC_INIT)
+#define DXE_USB_RESET (EFI_IO_BUS_USB | EFI_IOB_PC_RESET)
+#define DXE_USB_DETECT (EFI_IO_BUS_USB | EFI_IOB_PC_DETECT)
+#define DXE_USB_ENABLE (EFI_IO_BUS_USB | EFI_IOB_PC_ENABLE)
+#define DXE_USB_HOTPLUG (EFI_IO_BUS_USB | EFI_IOB_PC_HOTPLUG)
+
+//Reported by IDE bus driver
+#define DXE_IDE_BEGIN (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_INIT)
+#define DXE_IDE_RESET (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET)
+#define DXE_IDE_DETECT (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_DETECT)
+#define DXE_IDE_ENABLE (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_ENABLE)
+#define DXE_IDE_SMART_ERROR (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)
+#define DXE_IDE_CONTROLLER_ERROR (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_EC_CONTROLLER_ERROR)
+#define DXE_IDE_DEVICE_FAILURE (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_EC_INTERFACE_ERROR)
+
+// Reported by SCSI bus driver
+#define DXE_SCSI_BEGIN (EFI_IO_BUS_SCSI | EFI_IOB_PC_INIT)
+#define DXE_SCSI_RESET (EFI_IO_BUS_SCSI | EFI_IOB_PC_RESET)
+#define DXE_SCSI_DETECT (EFI_IO_BUS_SCSI | EFI_IOB_PC_DETECT)
+#define DXE_SCSI_ENABLE (EFI_IO_BUS_SCSI | EFI_IOB_PC_ENABLE)
+
+// Reported by Super I/O driver
+#define DXE_SIO_INIT (EFI_IO_BUS_LPC | EFI_IOB_PC_INIT)
+
+// Reported by Keyboard driver
+#define DXE_KEYBOARD_INIT (EFI_PERIPHERAL_KEYBOARD | EFI_P_PC_INIT)
+#define DXE_KEYBOARD_RESET (EFI_PERIPHERAL_KEYBOARD | EFI_P_PC_RESET)
+#define DXE_KEYBOARD_DISABLE (EFI_PERIPHERAL_KEYBOARD | EFI_P_PC_DISABLE)
+#define DXE_KEYBOARD_DETECT (EFI_PERIPHERAL_KEYBOARD | EFI_P_PC_PRESENCE_DETECT)
+#define DXE_KEYBOARD_ENABLE (EFI_PERIPHERAL_KEYBOARD | EFI_P_PC_ENABLE)
+#define DXE_KEYBOARD_CLEAR_BUFFER (EFI_PERIPHERAL_KEYBOARD | EFI_P_KEYBOARD_PC_CLEAR_BUFFER)
+#define DXE_KEYBOARD_SELF_TEST (EFI_PERIPHERAL_KEYBOARD | EFI_P_KEYBOARD_PC_SELF_TEST)
+
+// Reported by Mouse driver
+#define DXE_MOUSE_INIT (EFI_PERIPHERAL_MOUSE | EFI_P_PC_INIT)
+#define DXE_MOUSE_RESET (EFI_PERIPHERAL_MOUSE | EFI_P_PC_RESET)
+#define DXE_MOUSE_DISABLE (EFI_PERIPHERAL_MOUSE | EFI_P_PC_DISABLE)
+#define DXE_MOUSE_DETECT (EFI_PERIPHERAL_MOUSE | EFI_P_PC_PRESENCE_DETECT)
+#define DXE_MOUSE_ENABLE (EFI_PERIPHERAL_MOUSE | EFI_P_PC_ENABLE)
+
+// Reported by Mass Storage drivers
+#define DXE_FIXED_MEDIA_INIT (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_INIT)
+#define DXE_FIXED_MEDIA_RESET (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_RESET)
+#define DXE_FIXED_MEDIA_DISABLE (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_DISABLE)
+#define DXE_FIXED_MEDIA_DETECT (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_PRESENCE_DETECT)
+#define DXE_FIXED_MEDIA_ENABLE (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE)
+#define DXE_REMOVABLE_MEDIA_INIT (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_INIT)
+#define DXE_REMOVABLE_MEDIA_RESET (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_RESET)
+#define DXE_REMOVABLE_MEDIA_DISABLE (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_DISABLE)
+#define DXE_REMOVABLE_MEDIA_DETECT (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_PRESENCE_DETECT)
+#define DXE_REMOVABLE_MEDIA_ENABLE (EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_ENABLE)
+
+
+// Reported by BDS
+#define DXE_CON_OUT_CONNECT (EFI_PERIPHERAL_LOCAL_CONSOLE | EFI_P_PC_INIT)
+#define DXE_CON_IN_CONNECT (EFI_PERIPHERAL_KEYBOARD | EFI_P_PC_INIT)
+#define DXE_NO_CON_OUT (EFI_PERIPHERAL_LOCAL_CONSOLE | EFI_P_EC_NOT_DETECTED)
+#define DXE_NO_CON_IN (EFI_PERIPHERAL_KEYBOARD | EFI_P_EC_NOT_DETECTED)
+
+#endif
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.c b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.c
new file mode 100644
index 0000000000..1d876e1877
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.c
@@ -0,0 +1,207 @@
+/** @file
+ PlatformPostCodeMap implementation.
+
+ Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+
+#include "PlatformStatusCodesInternal.h"
+
+STATUS_CODE_TO_DATA_MAP mPostCodeProgressMap[] = {
+ //
+ // PEI
+ //
+ //Regular boot
+ { PEI_CORE_STARTED, 0x10 },
+ { PEI_CAR_CPU_INIT, 0x11 },
+ { PEI_MEMORY_SPD_READ, 0x1D },
+ { PEI_MEMORY_PRESENCE_DETECT, 0x1E },
+ { PEI_MEMORY_TIMING, 0x1F},
+ { PEI_MEMORY_CONFIGURING, 0x20 },
+ { PEI_MEMORY_INIT, 0x21 },
+ { PEI_MEMORY_INSTALLED, 0x31 },
+ { PEI_CPU_INIT, 0x32 },
+ { PEI_CPU_CACHE_INIT, 0x33 },
+ { PEI_CPU_BSP_SELECT, 0x34 },
+ { PEI_CPU_AP_INIT, 0x35 },
+ { PEI_CPU_SMM_INIT, 0x36 },
+ { PEI_MEM_NB_INIT, 0x37 },
+ { PEI_MEM_SB_INIT, 0x3B },
+ { PEI_DXE_IPL_STARTED, 0x4F },
+ //Recovery
+ { PEI_RECOVERY_AUTO, 0xF0 },
+ { PEI_RECOVERY_USER, 0xF1 },
+ { PEI_RECOVERY_STARTED, 0xF2 },
+ { PEI_RECOVERY_CAPSULE_FOUND, 0xF3 },
+ { PEI_RECOVERY_CAPSULE_LOADED, 0xF4 },
+ //S3
+ //{ PEI_S3_STARTED, 0xE0 },
+ { PEI_S3_BOOT_SCRIPT, 0xE1 },
+ //{ PEI_S3_VIDEO_REPOST, 0xE2 },
+ { PEI_S3_OS_WAKE, 0xE3 },
+
+ //
+ // DXE
+ //
+ { DXE_CORE_STARTED, 0x1060 },
+ { DXE_SBRUN_INIT, 0x1062 },
+ { DXE_NB_HB_INIT, 0x1068 },
+ { DXE_NB_INIT, 0x1069 },
+ { DXE_NB_SMM_INIT, 0x106A },
+ { DXE_SB_INIT, 0x1070 },
+ { DXE_SB_SMM_INIT, 0x1071 },
+ { DXE_SB_DEVICES_INIT, 0x1072 },
+ { DXE_BDS_STARTED, 0x1090 },
+ { DXE_PCI_BUS_BEGIN, 0x1092 },
+ { DXE_PCI_BUS_HPC_INIT, 0x1093 },
+ { DXE_PCI_BUS_ENUM, 0x1094 },
+ { DXE_PCI_BUS_REQUEST_RESOURCES, 0x1095 },
+ { DXE_PCI_BUS_ASSIGN_RESOURCES, 0x1096 },
+ { DXE_CON_OUT_CONNECT, 0x1097 },
+ { DXE_CON_IN_CONNECT, 0x1098 },
+ { DXE_SIO_INIT, 0x1099 },
+ { DXE_USB_BEGIN, 0x109A },
+ { DXE_USB_RESET, 0x109B },
+ { DXE_USB_DETECT, 0x109C },
+ { DXE_USB_ENABLE, 0x109D },
+ { DXE_IDE_BEGIN, 0x10A1 },
+ { DXE_IDE_RESET, 0x10A2 },
+ { DXE_IDE_DETECT, 0x10A3 },
+ { DXE_IDE_ENABLE, 0x10A4 },
+ { DXE_SCSI_BEGIN, 0x10A5 },
+ { DXE_SCSI_RESET, 0x10A6 },
+ { DXE_SCSI_DETECT, 0x10A7 },
+ { DXE_SCSI_ENABLE, 0x10A8 },
+ { DXE_SETUP_START, 0x10AB },
+ { DXE_SETUP_INPUT_WAIT, 0x10AC },
+ { DXE_READY_TO_BOOT, 0x10AD },
+ { DXE_LEGACY_BOOT, 0x10AE },
+ { DXE_EXIT_BOOT_SERVICES, 0x10AF },
+ { RT_SET_VIRTUAL_ADDRESS_MAP_BEGIN, 0x10B0 },
+ { RT_SET_VIRTUAL_ADDRESS_MAP_END, 0x10B1 },
+ { DXE_LEGACY_OPROM_INIT, 0x10B2 },
+ { DXE_RESET_SYSTEM, 0x10B3 },
+ { DXE_USB_HOTPLUG, 0x10B4 },
+ { DXE_PCI_BUS_HOTPLUG, 0x10B5 },
+ {0,0}
+};
+
+STATUS_CODE_TO_DATA_MAP mPostCodeErrorMap[] = {
+ //
+ // PEI
+ //
+ //Regular boot
+ { PEI_MEMORY_INVALID_TYPE, 0x50 },
+ { PEI_MEMORY_INVALID_SPEED, 0x50 },
+ { PEI_MEMORY_SPD_FAIL, 0x51 },
+ { PEI_MEMORY_INVALID_SIZE, 0x52 },
+ { PEI_MEMORY_MISMATCH, 0x52 },
+ { PEI_MEMORY_NOT_DETECTED, 0x53 },
+ { PEI_MEMORY_NONE_USEFUL, 0x53 },
+ { PEI_MEMORY_ERROR, 0x54 },
+ { PEI_MEMORY_NOT_INSTALLED, 0x55 },
+ { PEI_CPU_INVALID_TYPE, 0x56 },
+ { PEI_CPU_INVALID_SPEED, 0x56 },
+ { PEI_CPU_MISMATCH, 0x57 },
+ { PEI_CPU_SELF_TEST_FAILED, 0x58 },
+ { PEI_CPU_CACHE_ERROR, 0x58 },
+ { PEI_CPU_MICROCODE_UPDATE_FAILED, 0x59 },
+ { PEI_CPU_NO_MICROCODE, 0x59 },
+ { PEI_CPU_INTERNAL_ERROR, 0x5A },
+ { PEI_CPU_ERROR, 0x5A },
+ { PEI_RESET_NOT_AVAILABLE,0x5B },
+ //Recovery
+ { PEI_RECOVERY_PPI_NOT_FOUND, 0xF8 },
+ { PEI_RECOVERY_NO_CAPSULE, 0xF9 },
+ { PEI_RECOVERY_INVALID_CAPSULE, 0xFA },
+ //S3 Resume
+ { PEI_MEMORY_S3_RESUME_FAILED, 0xE8 },
+ { PEI_S3_RESUME_PPI_NOT_FOUND, 0xE9 },
+ { PEI_S3_BOOT_SCRIPT_ERROR, 0xEA },
+ { PEI_S3_OS_WAKE_ERROR, 0xEB },
+
+ //
+ // DXE
+ //
+ { DXE_CPU_SELF_TEST_FAILED, 0x1058 },
+ { DXE_NB_ERROR, 0x10D1 },
+ { DXE_SB_ERROR, 0x10D2 },
+ { DXE_ARCH_PROTOCOL_NOT_AVAILABLE, 0x10D3 },
+ { DXE_PCI_BUS_OUT_OF_RESOURCES, 0x10D4 },
+ { DXE_LEGACY_OPROM_NO_SPACE, 0x10D5 },
+ { DXE_NO_CON_OUT, 0x10D6 },
+ { DXE_NO_CON_IN, 0x10D7 },
+ { DXE_INVALID_PASSWORD, 0x10D8 },
+ { DXE_BOOT_OPTION_LOAD_ERROR, 0x10D9 },
+ { DXE_BOOT_OPTION_FAILED, 0x10DA },
+ { DXE_FLASH_UPDATE_FAILED, 0x10DB },
+ { DXE_RESET_NOT_AVAILABLE, 0x10DC },
+ {0,0}
+};
+
+STATUS_CODE_TO_DATA_MAP *mPostCodeStatusCodesMap[] = {
+ //#define EFI_PROGRESS_CODE 0x00000001
+ mPostCodeProgressMap,
+ //#define EFI_ERROR_CODE 0x00000002
+ mPostCodeErrorMap
+ //#define EFI_DEBUG_CODE 0x00000003
+};
+
+/**
+ Find the post code data from status code value.
+
+ @param Map The map used to find in.
+ @param Value The status code value.
+
+ @return PostCode 0 for not found.
+
+**/
+UINT32
+FindPostCodeData (
+ IN STATUS_CODE_TO_DATA_MAP *Map,
+ IN EFI_STATUS_CODE_VALUE Value
+ )
+{
+ while (Map->Value != 0) {
+ if (Map->Value == Value) {
+ return Map->Data;
+ }
+ Map++;
+ }
+ return 0;
+}
+
+/**
+ Get PostCode from status code type and value.
+
+ @param CodeType Indicates the type of status code being reported.
+ @param Value Describes the current status of a hardware or
+ software entity. This includes information about the class and
+ subclass that is used to classify the entity as well as an operation.
+ For progress codes, the operation is the current activity.
+ For error codes, it is the exception.For debug codes,it is not defined at this time.
+
+ @return PostCode
+
+**/
+UINT32
+EFIAPI
+GetPostCodeFromStatusCode (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value
+ )
+{
+ UINT32 CodeTypeIndex;
+
+ CodeTypeIndex = STATUS_CODE_TYPE (CodeType) - 1;
+
+ if (CodeTypeIndex >= sizeof (mPostCodeStatusCodesMap) / sizeof(mPostCodeStatusCodesMap[0])) {
+ return 0;
+ }
+
+ return FindPostCodeData (mPostCodeStatusCodesMap[CodeTypeIndex], Value);
+}
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.inf b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.inf
new file mode 100644
index 0000000000..ec225de551
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeMapLib/PostCodeMapLib.inf
@@ -0,0 +1,28 @@
+## @file
+# Instance of Platform Post Code Map Library.
+#
+# Copyright (c) 2011 - 2020, Intel Corporation. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010017
+ BASE_NAME = PostCodeMapLib
+ FILE_GUID = 1C579857-5328-4304-8607-77B0BC978554
+ VERSION_STRING = 1.0
+ MODULE_TYPE = BASE
+ LIBRARY_CLASS = PostCodeMapLib
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[Sources]
+ PostCodeMapLib.c
+ PlatformStatusCodesInternal.h
+
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.c b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.c
new file mode 100644
index 0000000000..7c9ee379ed
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.c
@@ -0,0 +1,102 @@
+/** @file
+ PostCode status code implementation.
+
+ Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/PeiServicesLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Ppi/ReportStatusCodeHandler.h>
+
+#include <Library/PostCodeMapLib.h>
+#include <Library/PostCodeLib.h>
+
+/**
+ Convert status code value and write data to post code.
+
+ @param PeiServices An indirect pointer to the EFI_PEI_SERVICES table published by the PEI Foundation.
+ @param CodeType Indicates the type of status code being reported.
+ @param Value Describes the current status of a hardware or
+ software entity. This includes information about the class and
+ subclass that is used to classify the entity as well as an operation.
+ For progress codes, the operation is the current activity.
+ For error codes, it is the exception.For debug codes,it is not defined at this time.
+ @param Instance The enumeration of a hardware or software entity within
+ the system. A system may contain multiple entities that match a class/subclass
+ pairing. The instance differentiates between them. An instance of 0 indicates
+ that instance information is unavailable, not meaningful, or not relevant.
+ Valid instance numbers start with 1.
+ @param CallerId This optional parameter may be used to identify the caller.
+ This parameter allows the status code driver to apply different rules to
+ different callers.
+ @param Data This optional parameter may be used to pass additional data.
+
+ @retval EFI_SUCCESS Status code reported to post code successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+PostCodeStatusCodeReportWorker (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value,
+ IN UINT32 Instance,
+ IN CONST EFI_GUID *CallerId,
+ IN CONST EFI_STATUS_CODE_DATA *Data OPTIONAL
+ )
+{
+ UINT32 PostCodeValue;
+
+ PostCodeValue = GetPostCodeFromStatusCode (CodeType, Value);
+ if (PostCodeValue != 0) {
+ DEBUG ((EFI_D_INFO, "POSTCODE=<%02x>\n", PostCodeValue));
+ PostCode (PostCodeValue);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Constructor function of PeiPostCodeStatusCodeHandlerLib.
+
+ This function is the constructor function of this PostCode Status Code Handler Library for PEI Phase.
+ It check whether need post code, and register it to gEfiPeiRscHandlerPpiGuid.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Describes the list of possible PEI Services.
+
+ @retval EFI_SUCESS The entry point of DXE IPL PEIM executes successfully.
+
+**/
+RETURN_STATUS
+EFIAPI
+PeiPostCodeStatusCodeHandlerLibConstructor (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+ EFI_PEI_RSC_HANDLER_PPI *RscHandlerPpi;
+
+ if (!PcdGetBool (PcdStatusCodeUsePostCode)) {
+ return RETURN_SUCCESS;
+ }
+
+ Status = PeiServicesLocatePpi (
+ &gEfiPeiRscHandlerPpiGuid,
+ 0,
+ NULL,
+ (VOID **) &RscHandlerPpi
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = RscHandlerPpi->Register (PostCodeStatusCodeReportWorker);
+ ASSERT (!EFI_ERROR (Status) || Status == EFI_ALREADY_STARTED);
+
+ return RETURN_SUCCESS;
+}
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.inf b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.inf
new file mode 100644
index 0000000000..2eee4b193a
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/PeiPostCodeStatusCodeHandlerLib.inf
@@ -0,0 +1,52 @@
+## @file
+# PostCode status code implementation.
+#
+# Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+# vendor. This file may not be modified, except as allowed by
+# additional terms of your license agreement.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PeiPostCodeStatusCodeHandlerLib
+ FILE_GUID = FA32350A-63DB-4AC6-88D1-BC5327EE7ECE
+ MODULE_TYPE = PEIM
+ CONSTRUCTOR = PeiPostCodeStatusCodeHandlerLibConstructor
+ LIBRARY_CLASS = StatusCodeHandlerLib|SEC PEIM PEI_COR
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC (EBC is only for build)
+#
+
+[Sources]
+ PeiPostCodeStatusCodeHandlerLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec
+
+[LibraryClasses]
+ PeiServicesLib
+ ReportStatusCodeLib
+ DebugLib
+ PostCodeLib
+ PostCodeMapLib
+ PcdLib
+
+[Guids]
+ gEfiStatusCodeDataTypeStringGuid ## SOMETIMES_CONSUMES ## GUID
+
+[Pcd]
+ gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode ## CONSUMES
+
+[Ppis]
+ gEfiPeiRscHandlerPpiGuid ## CONSUMES
+
+[Depex]
+ TRUE
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.c b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.c
new file mode 100644
index 0000000000..a91ce24c31
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.c
@@ -0,0 +1,183 @@
+/** @file
+ PostCode status code implementation.
+
+ Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Guid/EventGroup.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Protocol/ReportStatusCodeHandler.h>
+
+#include <Library/PostCodeMapLib.h>
+#include <Library/PostCodeLib.h>
+
+EFI_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
+EFI_EVENT mExitBootServicesEvent = NULL;
+
+/**
+ Convert status code value and write data to post code.
+
+ @param CodeType Indicates the type of status code being reported.
+ @param Value Describes the current status of a hardware or
+ software entity. This includes information about the class and
+ subclass that is used to classify the entity as well as an operation.
+ For progress codes, the operation is the current activity.
+ For error codes, it is the exception.For debug codes,it is not defined at this time.
+ @param Instance The enumeration of a hardware or software entity within
+ the system. A system may contain multiple entities that match a class/subclass
+ pairing. The instance differentiates between them. An instance of 0 indicates
+ that instance information is unavailable, not meaningful, or not relevant.
+ Valid instance numbers start with 1.
+ @param CallerId This optional parameter may be used to identify the caller.
+ This parameter allows the status code driver to apply different rules to
+ different callers.
+ @param Data This optional parameter may be used to pass additional data.
+
+ @retval EFI_SUCCESS Status code reported to post code successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+PostCodeStatusCodeReportWorker (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value,
+ IN UINT32 Instance,
+ IN EFI_GUID *CallerId,
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL
+ )
+{
+ UINT32 PostCodeValue;
+
+ PostCodeValue = GetPostCodeFromStatusCode (CodeType, Value);
+ if (PostCodeValue != 0) {
+ DEBUG ((EFI_D_INFO, "POSTCODE=<%02x>\n", PostCodeValue));
+ PostCode (PostCodeValue);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Unregister status code callback functions only available at boot time from
+ report status code router when exiting boot services.
+
+ @param Event Event whose notification function is being invoked.
+ @param Context Pointer to the notification function's context, which is
+ always zero in current implementation.
+
+**/
+VOID
+EFIAPI
+UnregisterPostCodeBootTimeHandlers (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ if (PcdGetBool (PcdStatusCodeUsePostCode)) {
+ mRscHandlerProtocol->Unregister (PostCodeStatusCodeReportWorker);
+ }
+}
+
+
+
+/**
+ Register status code callback function only when Report Status Code protocol
+ is installed.
+
+ @param Event Event whose notification function is being invoked.
+ @param Context Pointer to the notification function's context, which is
+ always zero in current implementation.
+
+**/
+VOID
+EFIAPI
+RegisterPostCodeBootTimeHandlers (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+)
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEfiRscHandlerProtocolGuid,
+ NULL,
+ (VOID **) &mRscHandlerProtocol
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ if (PcdGetBool (PcdStatusCodeUsePostCode)) {
+ mRscHandlerProtocol->Register (PostCodeStatusCodeReportWorker, TPL_HIGH_LEVEL);
+ }
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ UnregisterPostCodeBootTimeHandlers,
+ NULL,
+ &gEfiEventExitBootServicesGuid,
+ &mExitBootServicesEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+/**
+ Constructor function of RuntimeDxePostCodeStatusCodeHandlerLib.
+
+ This function allocates memory for extended status code data, caches
+ the report status code service, and registers events.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+RuntimeDxePostCodeStatusCodeHandlerLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT RegisterStatusCodeHandlerEvent;
+ VOID *Registration;
+
+ Status = gBS->LocateProtocol (
+ &gEfiRscHandlerProtocolGuid,
+ NULL,
+ (VOID **) &mRscHandlerProtocol
+ );
+
+ if (!EFI_ERROR (Status)) {
+ RegisterPostCodeBootTimeHandlers (NULL, NULL);
+ } else {
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ RegisterPostCodeBootTimeHandlers,
+ NULL,
+ &RegisterStatusCodeHandlerEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register for protocol notifications on this event
+ //
+ Status = gBS->RegisterProtocolNotify (
+ &gEfiRscHandlerProtocolGuid,
+ RegisterStatusCodeHandlerEvent,
+ &Registration
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.inf b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.inf
new file mode 100644
index 0000000000..8cff1c20a3
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.inf
@@ -0,0 +1,57 @@
+## @file
+# PostCode status code implementation.
+#
+# Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+# vendor. This file may not be modified, except as allowed by
+# additional terms of your license agreement.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = RuntimeDxePostCodeStatusCodeHandlerLib
+ FILE_GUID = FC4F3901-3E9B-4CA3-AB6C-1B65E9AA6960
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ CONSTRUCTOR = RuntimeDxePostCodeStatusCodeHandlerLibConstructor
+ LIBRARY_CLASS = StatusCodeHandlerLib|DXE_RUNTIME_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC (EBC is only for build)
+#
+
+[Sources]
+ RuntimeDxePostCodeStatusCodeHandlerLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ UefiBootServicesTableLib
+ BaseMemoryLib
+ PcdLib
+ DevicePathLib
+ UefiRuntimeLib
+ ReportStatusCodeLib
+ PostCodeMapLib
+ PostCodeLib
+
+[Guids]
+ gEfiStatusCodeDataTypeStringGuid ## SOMETIMES_CONSUMES ## GUID
+
+[Pcd]
+ gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode ## CONSUMES
+
+[Protocols]
+ gEfiRscHandlerProtocolGuid ## CONSUMES
+
+[Depex]
+ TRUE
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.c b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.c
new file mode 100644
index 0000000000..6221e31199
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.c
@@ -0,0 +1,138 @@
+/** @file
+ PostCode status code implementation.
+
+ Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/SmmServicesTableLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/DebugLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Protocol/SmmReportStatusCodeHandler.h>
+
+#include <Library/PostCodeLib.h>
+#include <Library/PostCodeMapLib.h>
+
+EFI_SMM_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
+
+/**
+ Convert status code value and write data to post code.
+
+ @param CodeType Indicates the type of status code being reported.
+ @param Value Describes the current status of a hardware or
+ software entity. This includes information about the class and
+ subclass that is used to classify the entity as well as an operation.
+ For progress codes, the operation is the current activity.
+ For error codes, it is the exception.For debug codes,it is not defined at this time.
+ @param Instance The enumeration of a hardware or software entity within
+ the system. A system may contain multiple entities that match a class/subclass
+ pairing. The instance differentiates between them. An instance of 0 indicates
+ that instance information is unavailable, not meaningful, or not relevant.
+ Valid instance numbers start with 1.
+ @param CallerId This optional parameter may be used to identify the caller.
+ This parameter allows the status code driver to apply different rules to
+ different callers.
+ @param Data This optional parameter may be used to pass additional data.
+
+ @retval EFI_SUCCESS Status code reported to post code successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+PostCodeStatusCodeReportWorker (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value,
+ IN UINT32 Instance,
+ IN EFI_GUID *CallerId,
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL
+ )
+{
+ UINT32 PostCodeValue;
+
+ PostCodeValue = GetPostCodeFromStatusCode (CodeType, Value);
+ if (PostCodeValue != 0) {
+ DEBUG ((EFI_D_INFO, "POSTCODE=<%02x>\n", PostCodeValue));
+ PostCode (PostCodeValue);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Register status code callback function only when Report Status Code protocol
+ is installed.
+
+ @param Protocol Points to the protocol's unique identifier.
+ @param Interface Points to the interface instance.
+ @param Handle The handle on which the interface was installed.
+
+ @retval EFI_SUCCESS Notification runs successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+RegisterPostCodeBootTimeHandlers (
+ IN CONST EFI_GUID *Protocol,
+ IN VOID *Interface,
+ IN EFI_HANDLE Handle
+)
+{
+ EFI_STATUS Status;
+
+ Status = gSmst->SmmLocateProtocol (
+ &gEfiSmmRscHandlerProtocolGuid,
+ NULL,
+ (VOID **) &mRscHandlerProtocol
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ if (PcdGetBool (PcdStatusCodeUsePostCode)) {
+ mRscHandlerProtocol->Register (PostCodeStatusCodeReportWorker);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Constructor function of SmmPostCodeStatusCodeHandlerLib.
+
+ This function allocates memory for extended status code data, caches
+ the report status code service, and registers events.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+SmmPostCodeStatusCodeHandlerLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ VOID *Registration;
+
+ Status = gSmst->SmmLocateProtocol (
+ &gEfiSmmRscHandlerProtocolGuid,
+ NULL,
+ (VOID **) &mRscHandlerProtocol
+ );
+ if (!EFI_ERROR (Status)) {
+ RegisterPostCodeBootTimeHandlers (NULL, NULL, NULL);
+ } else {
+ gSmst->SmmRegisterProtocolNotify (
+ &gEfiSmmRscHandlerProtocolGuid,
+ RegisterPostCodeBootTimeHandlers,
+ &Registration
+ );
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.inf b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.inf
new file mode 100644
index 0000000000..09debfeb31
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/SmmPostCodeStatusCodeHandlerLib.inf
@@ -0,0 +1,55 @@
+## @file
+# PostCode status code implementation.
+#
+# Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+# vendor. This file may not be modified, except as allowed by
+# additional terms of your license agreement.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SmmPostCodeStatusCodeHandlerLib
+ FILE_GUID = AE5C0A80-309A-42F7-BFDD-80CDA1BA2D7E
+ MODULE_TYPE = DXE_SMM_DRIVER
+ VERSION_STRING = 1.0
+ CONSTRUCTOR = SmmPostCodeStatusCodeHandlerLibConstructor
+ LIBRARY_CLASS = StatusCodeHandlerLib|DXE_SMM_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC (EBC is only for build)
+#
+
+[Sources]
+ SmmPostCodeStatusCodeHandlerLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec
+
+[LibraryClasses]
+ PcdLib
+ BaseMemoryLib
+ SmmServicesTableLib
+ DebugLib
+ MemoryAllocationLib
+ ReportStatusCodeLib
+ PostCodeMapLib
+ PostCodeLib
+
+[Guids]
+ gEfiStatusCodeDataTypeStringGuid ## SOMETIMES_CONSUMES ## GUID
+
+[Pcd]
+ gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode ## CONSUMES
+
+[Protocols]
+ gEfiSmmRscHandlerProtocolGuid ## CONSUMES
+
+[Depex]
+ TRUE
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec
new file mode 100644
index 0000000000..a42f7d4e12
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dec
@@ -0,0 +1,30 @@
+## @file
+# This package provides PostCode Debug feature.
+# This package should only depend on EDK II Core packages.
+#
+# The DEC files are used by the utilities that parse DSC and
+# INF files to generate AutoGen.c and AutoGen.h files
+# for the build infrastructure.
+#
+# Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ DEC_SPECIFICATION = 0x00010017
+ PACKAGE_NAME = PostCodeDebugFeaturePkg
+ PACKAGE_GUID = A579E0A8-0D27-4CA6-900E-D613003729DE
+ PACKAGE_VERSION = 0.1
+
+[Includes]
+ Include
+
+[LibraryClasses]
+
+[Guids]
+ gPostCodeDebugFeaturePkgTokenSpaceGuid = {0x68886ac8, 0x7a29, 0x4845, {0xa7, 0x02, 0xe9, 0x83, 0xc8, 0x7f, 0xfb, 0xab}}
+
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode|TRUE|BOOLEAN|0x00000001
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dsc b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dsc
new file mode 100644
index 0000000000..5a236a2daf
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/PostCodeDebugFeaturePkg.dsc
@@ -0,0 +1,30 @@
+## @file
+# This package provides PostCode Debug feature.
+# This package should only depend on EDK II Core packages.
+#
+# The DEC files are used by the utilities that parse DSC and
+# INF files to generate AutoGen.c and AutoGen.h files
+# for the build infrastructure.
+#
+# Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ PLATFORM_NAME = PostCodeFeaturePkg
+ PLATFORM_GUID = 4ADE0B1A-7929-495D-A221-6576C7884CAC
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x00010005
+ OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
+ SUPPORTED_ARCHITECTURES = IA32|X64
+ BUILD_TARGETS = DEBUG|RELEASE|NOOPT
+ SKUID_IDENTIFIER = DEFAULT
+ PEI_ARCH = IA32
+ DXE_ARCH = X64
+
+#
+# This package always builds the feature.
+#
+!include Include/PostCodeDebugFeature.dsc
diff --git a/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Readme.md b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Readme.md
new file mode 100644
index 0000000000..c8c1b7d709
--- /dev/null
+++ b/Features/Intel/Debugging/PostCodeDebugFeaturePkg/Readme.md
@@ -0,0 +1,118 @@
+# Overview
+* **Feature Name:** Post Code Debug
+* **PI Phase(s) Supported:** PEI, DXE, SMM
+* **SMM Required?** Yes
+
+More Information:
+
+## Purpose
+The PostCodeDebugFeaturePkg include some useful post code debug libraries, such as get post code from status code and show it.
+This is an important capability in firmware development to get and analyze the post code.
+
+
+# High-Level Theory of Operation
+It provide a library PostCodeStatusCodeHandlerLib used by edk2 StatusCodeHandler.efi, used to show the post code.
+It also provide a library of PostCodeMap lib, it map the status code to post code.
+A library of PostCode lib is needed by platform.
+
+In the library contstructor function, PostCodeStatusCodeHandlerLib register the call back function for ReportStatusCode.
+When called, it call GetPostCodeFromStatusCode() in PostCodeMapLib to get post code from status code, and call PostCode() in PostCodeLib to show the post code.
+
+PostCodeStatusCodeHandlerLib include 3 libraries for PEI, RuntimeDxe, SMM:
+* PeiPostCodeStatusCodeHandlerLib
+* RuntimeDxePostCodeStatusCodeHandlerLib
+* SmmPostCodeStatusCodeHandlerLib
+
+## Firmware Volumes
+Linked with StatusCodeHandler.efi, and make sure put the StatusCodeHandler.efi after the ReportStatusCodeRouter.efi.
+
+## Modules
+* PostCodeStatusCodeHandlerLib
+* PostCodeMapLib
+
+## PostCodeStatusCodeHandlerLib
+This library register the call back function for ReportStatusCode, and get
+post code from status code, and show post code.
+
+## PostCodeMapLib
+This library provide a function to get post code from status code.
+
+## Key Functions
+* In PeiPostCodeStatusCodeHandlerLib:
+ EFI_STATUS
+ EFIAPI
+ PostCodeStatusCodeReportWorker (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value,
+ IN UINT32 Instance,
+ IN CONST EFI_GUID *CallerId,
+ IN CONST EFI_STATUS_CODE_DATA *Data OPTIONAL
+ )
+
+* In RuntimeDxePostCodeStatusCodeHandlerLib:
+ EFI_STATUS
+ EFIAPI
+ PostCodeStatusCodeReportWorker (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value,
+ IN UINT32 Instance,
+ IN EFI_GUID *CallerId,
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL
+ )
+
+* In SmmPostCodeStatusCodeHandlerLib:
+ EFI_STATUS
+ EFIAPI
+ PostCodeStatusCodeReportWorker (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value,
+ IN UINT32 Instance,
+ IN EFI_GUID *CallerId,
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL
+ )
+
+* In PostCodeMapLib:
+ UINT32
+ EFIAPI
+ GetPostCodeFromStatusCode (
+ IN EFI_STATUS_CODE_TYPE CodeType,
+ IN EFI_STATUS_CODE_VALUE Value
+ )
+
+## Configuration
+* Link the library to StatusCodeHandler.efi.
+ Example:
+ MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|PostCodeDebugFeaturePkg/Library/PostCodeStatusCodeHandlerLib/RuntimeDxePostCodeStatusCodeHandlerLib.inf
+ }
+ Refer to PostCodeDebugFeaturePkg.dsc for other example.
+* Config pcd gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode
+ In platform .dsc file, need to config the type of gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode.
+ Use PcdsFixedAtBuild to save binary size, and use PcdsDynamic if want to enable/disable in runtime.
+* Implemented platform's special PostCodeMapLib if needed.
+* Provide the platform's special PostCodeLib.
+* Make sure put the StatusCodeHandler.efi after the ReportStatusCodeRouter.efi.
+
+## Data Flows
+Status Code (ReportStatusCode) -> Post Code (GetPostCodeFromStatusCode).
+
+## Control Flows
+ReportStatusCode() -> PostCodeStatusCodeReportWorker() -> GetPostCodeFromStatusCode() -> PostCode()
+
+## Build Flows
+There is not special build flows.
+
+## Test Point Results
+Verify the post code shown is correct.
+
+## Functional Exit Criteria
+N/A
+
+## Feature Enabling Checklist
+* Set the PCD gPostCodeDebugFeaturePkgTokenSpaceGuid.PcdStatusCodeUsePostCode to TRUE.
+* The post code can be shown.
+
+## Common Optimizations
+* Implemented platform's special PostCodeMapLib if needed.
--
2.24.0.windows.2
reply other threads:[~2020-06-10 6:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200610063120.23522-1-ming.tan@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox