* [PATCH edk2-platforms 1/1] SbsaQemu: Build infrastructure for StandaloneMm image
@ 2020-06-11 23:51 Masahisa Kojima
2020-06-12 16:20 ` [edk2-devel] " Ard Biesheuvel
0 siblings, 1 reply; 3+ messages in thread
From: Masahisa Kojima @ 2020-06-11 23:51 UTC (permalink / raw)
To: devel, ard.biesheuvel, leif; +Cc: graeme.gregory, rad, tanmay.jagdale
Add the build infrastructure for compilation of StandaloneMm image.
This is a preparation for StandaloneMm RAS feature implementation
on the SBSA Qemu platform.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
---
Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc | 134 ++++++++++++++++++++
Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf | 93 ++++++++++++++
2 files changed, 227 insertions(+)
diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
new file mode 100644
index 000000000000..47f8ea5defb3
--- /dev/null
+++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
@@ -0,0 +1,134 @@
+#
+# Copyright (c) 2020, Linaro Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = SbsaQemuStandaloneMm
+ PLATFORM_GUID = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
+ PLATFORM_VERSION = 1.0
+ DSC_SPECIFICATION = 0x00010011
+ OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
+ SUPPORTED_ARCHITECTURES = AARCH64
+ BUILD_TARGETS = DEBUG|RELEASE|NOOPT
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
+ DEFINE DEBUG_MESSAGE = TRUE
+
+ # LzmaF86
+ DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
+
+################################################################################
+#
+# Library Class section - list of all Library Classes needed by this Platform.
+#
+################################################################################
+[LibraryClasses]
+ #
+ # Basic
+ #
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+ DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
+ HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
+ MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+
+ #
+ # Entry point
+ #
+ StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
+
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
+ ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
+ CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+ PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
+
+ # ARM PL011 UART Driver
+ PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
+ PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
+ SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
+
+ StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
+
+ #
+ # It is not possible to prevent the ARM compiler for generic intrinsic functions.
+ # This library provides the instrinsic functions generate by a given compiler.
+ # And NULL mean link this library into all ARM images.
+ #
+ NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+[LibraryClasses.common.MM_STANDALONE]
+ HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
+ MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
+ MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+[PcdsFixedAtBuild]
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
+ gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
+
+ ## PL011 - Serial Terminal
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
+
+###################################################################################################
+#
+# Components Section - list of the modules and components that will be processed by compilation
+# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
+#
+# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
+# into firmware volume images. This section is just a list of modules to compile from
+# source into UEFI-compliant binaries.
+# It is the FDF file that contains information on combining binary files into firmware
+# volume images, whose concept is beyond UEFI and is described in PI specification.
+# Binary modules do not need to be listed in this section, as they should be
+# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
+# Logo (Logo.bmp), and etc.
+# There may also be modules listed in this section that are not required in the FDF file,
+# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
+# generated for it, but the binary will not be put into any firmware volume.
+#
+###################################################################################################
+[Components.common]
+ #
+ # MM Core
+ #
+ StandaloneMmPkg/Core/StandaloneMmCore.inf
+
+[Components.AARCH64]
+ StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
+
+###################################################################################################
+#
+# BuildOptions Section - Define the module specific tool chain flags that should be used as
+# the default flags for a module. These flags are appended to any
+# standard flags that are defined by the build process. They can be
+# applied for any modules or only those modules with the specific
+# module style (EDK or EDKII) specified in [Components] section.
+#
+###################################################################################################
+[BuildOptions.AARCH64]
+ GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
new file mode 100644
index 000000000000..b19b42f78451
--- /dev/null
+++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
@@ -0,0 +1,93 @@
+#
+# Copyright (c) 2020, Linaro Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.STANDALONE_MM]
+BaseAddress = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
+Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
+ErasePolarity = 1
+
+BlockSize = 0x00001000
+NumBlocks = 0x0e00
+
+0x00000000|0x00280000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF StandaloneMmPkg/Core/StandaloneMmCore.inf
+ INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+[Rule.Common.MM_CORE_STANDALONE]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+ PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.MM_STANDALONE]
+ FILE MM_STANDALONE = $(NAMED_GUID) {
+ SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [edk2-devel] [PATCH edk2-platforms 1/1] SbsaQemu: Build infrastructure for StandaloneMm image
2020-06-11 23:51 [PATCH edk2-platforms 1/1] SbsaQemu: Build infrastructure for StandaloneMm image Masahisa Kojima
@ 2020-06-12 16:20 ` Ard Biesheuvel
2020-06-15 1:35 ` Masahisa Kojima
0 siblings, 1 reply; 3+ messages in thread
From: Ard Biesheuvel @ 2020-06-12 16:20 UTC (permalink / raw)
To: devel, masahisa.kojima, leif; +Cc: graeme.gregory, rad, tanmay.jagdale
On 6/12/20 1:51 AM, Masahisa Kojima via groups.io wrote:
> Add the build infrastructure for compilation of StandaloneMm image.
> This is a preparation for StandaloneMm RAS feature implementation
> on the SBSA Qemu platform.
>
> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
May I suggest that we start with variable support on the secure side? It
should be quite straight-forward to expose part of the secure NOR flash
bank via the existing MM stack for variable services that I ported to
SynQuacer last year.
> ---
> Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc | 134 ++++++++++++++++++++
> Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf | 93 ++++++++++++++
> 2 files changed, 227 insertions(+)
>
> diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> new file mode 100644
> index 000000000000..47f8ea5defb3
> --- /dev/null
> +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> @@ -0,0 +1,134 @@
> +#
> +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +################################################################################
> +#
> +# Defines Section - statements that will be processed to create a Makefile.
> +#
> +################################################################################
> +[Defines]
> + PLATFORM_NAME = SbsaQemuStandaloneMm
> + PLATFORM_GUID = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
> + PLATFORM_VERSION = 1.0
> + DSC_SPECIFICATION = 0x00010011
> + OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
> + SUPPORTED_ARCHITECTURES = AARCH64
> + BUILD_TARGETS = DEBUG|RELEASE|NOOPT
> + SKUID_IDENTIFIER = DEFAULT
> + FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> + DEFINE DEBUG_MESSAGE = TRUE
> +
> + # LzmaF86
> + DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
> +
> +################################################################################
> +#
> +# Library Class section - list of all Library Classes needed by this Platform.
> +#
> +################################################################################
> +[LibraryClasses]
> + #
> + # Basic
> + #
> + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
> + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
> + ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> + FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
> + HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
> + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> + MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
> + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
> + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
> +
> + #
> + # Entry point
> + #
> + StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> +
> + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> + StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
> + ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
> + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
> + PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
> +
> + # ARM PL011 UART Driver
> + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
> + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
> + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
> +
> + StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> +
> + #
> + # It is not possible to prevent the ARM compiler for generic intrinsic functions.
> + # This library provides the instrinsic functions generate by a given compiler.
> + # And NULL mean link this library into all ARM images.
> + #
> + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> +
> +[LibraryClasses.common.MM_STANDALONE]
> + HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
> + MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
> + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
> +
> +################################################################################
> +#
> +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> +#
> +################################################################################
> +[PcdsFixedAtBuild]
> + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
> + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
> + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
> +
> + ## PL011 - Serial Terminal
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
> +
> + gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
> +
> +###################################################################################################
> +#
> +# Components Section - list of the modules and components that will be processed by compilation
> +# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
> +#
> +# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
> +# into firmware volume images. This section is just a list of modules to compile from
> +# source into UEFI-compliant binaries.
> +# It is the FDF file that contains information on combining binary files into firmware
> +# volume images, whose concept is beyond UEFI and is described in PI specification.
> +# Binary modules do not need to be listed in this section, as they should be
> +# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
> +# Logo (Logo.bmp), and etc.
> +# There may also be modules listed in this section that are not required in the FDF file,
> +# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
> +# generated for it, but the binary will not be put into any firmware volume.
> +#
> +###################################################################################################
> +[Components.common]
> + #
> + # MM Core
> + #
> + StandaloneMmPkg/Core/StandaloneMmCore.inf
> +
> +[Components.AARCH64]
> + StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> +
> +###################################################################################################
> +#
> +# BuildOptions Section - Define the module specific tool chain flags that should be used as
> +# the default flags for a module. These flags are appended to any
> +# standard flags that are defined by the build process. They can be
> +# applied for any modules or only those modules with the specific
> +# module style (EDK or EDKII) specified in [Components] section.
> +#
> +###################################################################################################
> +[BuildOptions.AARCH64]
> + GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
> diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> new file mode 100644
> index 000000000000..b19b42f78451
> --- /dev/null
> +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> @@ -0,0 +1,93 @@
> +#
> +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +################################################################################
> +#
> +# FD Section
> +# The [FD] Section is made up of the definition statements and a
> +# description of what goes into the Flash Device Image. Each FD section
> +# defines one flash "device" image. A flash device image may be one of
> +# the following: Removable media bootable image (like a boot floppy
> +# image,) an Option ROM image (that would be "flashed" into an add-in
> +# card,) a System "Flash" image (that would be burned into a system's
> +# flash) or an Update ("Capsule") image that will be used to update and
> +# existing system flash.
> +#
> +################################################################################
> +
> +[FD.STANDALONE_MM]
> +BaseAddress = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
> +Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
> +ErasePolarity = 1
> +
> +BlockSize = 0x00001000
> +NumBlocks = 0x0e00
> +
> +0x00000000|0x00280000
> +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> +FV = FVMAIN_COMPACT
> +
> +[FV.FVMAIN_COMPACT]
> +FvAlignment = 16
> +ERASE_POLARITY = 1
> +MEMORY_MAPPED = TRUE
> +STICKY_WRITE = TRUE
> +LOCK_CAP = TRUE
> +LOCK_STATUS = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP = TRUE
> +WRITE_STATUS = TRUE
> +WRITE_LOCK_CAP = TRUE
> +WRITE_LOCK_STATUS = TRUE
> +READ_DISABLED_CAP = TRUE
> +READ_ENABLED_CAP = TRUE
> +READ_STATUS = TRUE
> +READ_LOCK_CAP = TRUE
> +READ_LOCK_STATUS = TRUE
> +
> + INF StandaloneMmPkg/Core/StandaloneMmCore.inf
> + INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> +
> +################################################################################
> +#
> +# Rules are use with the [FV] section's module INF type to define
> +# how an FFS file is created for a given INF file. The following Rule are the default
> +# rules for the different module type. User can add the customized rules to define the
> +# content of the FFS file.
> +#
> +################################################################################
> +
> +
> +############################################################################
> +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
> +############################################################################
> +#
> +#[Rule.Common.DXE_DRIVER]
> +# FILE DRIVER = $(NAMED_GUID) {
> +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> +# COMPRESS PI_STD {
> +# GUIDED {
> +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> +# UI STRING="$(MODULE_NAME)" Optional
> +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> +# }
> +# }
> +# }
> +#
> +############################################################################
> +
> +[Rule.Common.MM_CORE_STANDALONE]
> + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> + PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> + }
> +
> +[Rule.Common.MM_STANDALONE]
> + FILE MM_STANDALONE = $(NAMED_GUID) {
> + SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> + UI STRING="$(MODULE_NAME)" Optional
> + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> + }
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [edk2-devel] [PATCH edk2-platforms 1/1] SbsaQemu: Build infrastructure for StandaloneMm image
2020-06-12 16:20 ` [edk2-devel] " Ard Biesheuvel
@ 2020-06-15 1:35 ` Masahisa Kojima
0 siblings, 0 replies; 3+ messages in thread
From: Masahisa Kojima @ 2020-06-15 1:35 UTC (permalink / raw)
To: edk2-devel-groups-io, Ard Biesheuvel
Cc: leif, Graeme Gregory, rad, Tanmay Jagdale
> May I suggest that we start with variable support on the secure side? It
> should be quite straight-forward to expose part of the secure NOR flash
> bank via the existing MM stack for variable services that I ported to
> SynQuacer last year.
>
Thank you for your comment, I will check the secure varstore implementation.
On Sat, 13 Jun 2020 at 01:20, Ard Biesheuvel <ard.biesheuvel@arm.com> wrote:
>
> On 6/12/20 1:51 AM, Masahisa Kojima via groups.io wrote:
> > Add the build infrastructure for compilation of StandaloneMm image.
> > This is a preparation for StandaloneMm RAS feature implementation
> > on the SBSA Qemu platform.
> >
> > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
>
> May I suggest that we start with variable support on the secure side? It
> should be quite straight-forward to expose part of the secure NOR flash
> bank via the existing MM stack for variable services that I ported to
> SynQuacer last year.
>
>
> > ---
> > Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc | 134 ++++++++++++++++++++
> > Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf | 93 ++++++++++++++
> > 2 files changed, 227 insertions(+)
> >
> > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > new file mode 100644
> > index 000000000000..47f8ea5defb3
> > --- /dev/null
> > +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > @@ -0,0 +1,134 @@
> > +#
> > +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +
> > +################################################################################
> > +#
> > +# Defines Section - statements that will be processed to create a Makefile.
> > +#
> > +################################################################################
> > +[Defines]
> > + PLATFORM_NAME = SbsaQemuStandaloneMm
> > + PLATFORM_GUID = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
> > + PLATFORM_VERSION = 1.0
> > + DSC_SPECIFICATION = 0x00010011
> > + OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
> > + SUPPORTED_ARCHITECTURES = AARCH64
> > + BUILD_TARGETS = DEBUG|RELEASE|NOOPT
> > + SKUID_IDENTIFIER = DEFAULT
> > + FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > + DEFINE DEBUG_MESSAGE = TRUE
> > +
> > + # LzmaF86
> > + DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
> > +
> > +################################################################################
> > +#
> > +# Library Class section - list of all Library Classes needed by this Platform.
> > +#
> > +################################################################################
> > +[LibraryClasses]
> > + #
> > + # Basic
> > + #
> > + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> > + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> > + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
> > + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
> > + ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> > + FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
> > + HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
> > + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> > + MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
> > + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
> > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> > + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
> > +
> > + #
> > + # Entry point
> > + #
> > + StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> > +
> > + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> > + StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
> > + ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
> > + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
> > + PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
> > +
> > + # ARM PL011 UART Driver
> > + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
> > + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
> > + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
> > +
> > + StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> > +
> > + #
> > + # It is not possible to prevent the ARM compiler for generic intrinsic functions.
> > + # This library provides the instrinsic functions generate by a given compiler.
> > + # And NULL mean link this library into all ARM images.
> > + #
> > + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> > +
> > +[LibraryClasses.common.MM_STANDALONE]
> > + HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
> > + MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
> > + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
> > +
> > +################################################################################
> > +#
> > +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> > +#
> > +################################################################################
> > +[PcdsFixedAtBuild]
> > + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
> > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
> > + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
> > +
> > + ## PL011 - Serial Terminal
> > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
> > + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
> > +
> > + gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
> > +
> > +###################################################################################################
> > +#
> > +# Components Section - list of the modules and components that will be processed by compilation
> > +# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
> > +#
> > +# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
> > +# into firmware volume images. This section is just a list of modules to compile from
> > +# source into UEFI-compliant binaries.
> > +# It is the FDF file that contains information on combining binary files into firmware
> > +# volume images, whose concept is beyond UEFI and is described in PI specification.
> > +# Binary modules do not need to be listed in this section, as they should be
> > +# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
> > +# Logo (Logo.bmp), and etc.
> > +# There may also be modules listed in this section that are not required in the FDF file,
> > +# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
> > +# generated for it, but the binary will not be put into any firmware volume.
> > +#
> > +###################################################################################################
> > +[Components.common]
> > + #
> > + # MM Core
> > + #
> > + StandaloneMmPkg/Core/StandaloneMmCore.inf
> > +
> > +[Components.AARCH64]
> > + StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> > +
> > +###################################################################################################
> > +#
> > +# BuildOptions Section - Define the module specific tool chain flags that should be used as
> > +# the default flags for a module. These flags are appended to any
> > +# standard flags that are defined by the build process. They can be
> > +# applied for any modules or only those modules with the specific
> > +# module style (EDK or EDKII) specified in [Components] section.
> > +#
> > +###################################################################################################
> > +[BuildOptions.AARCH64]
> > + GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
> > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > new file mode 100644
> > index 000000000000..b19b42f78451
> > --- /dev/null
> > +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > @@ -0,0 +1,93 @@
> > +#
> > +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +
> > +################################################################################
> > +#
> > +# FD Section
> > +# The [FD] Section is made up of the definition statements and a
> > +# description of what goes into the Flash Device Image. Each FD section
> > +# defines one flash "device" image. A flash device image may be one of
> > +# the following: Removable media bootable image (like a boot floppy
> > +# image,) an Option ROM image (that would be "flashed" into an add-in
> > +# card,) a System "Flash" image (that would be burned into a system's
> > +# flash) or an Update ("Capsule") image that will be used to update and
> > +# existing system flash.
> > +#
> > +################################################################################
> > +
> > +[FD.STANDALONE_MM]
> > +BaseAddress = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
> > +Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
> > +ErasePolarity = 1
> > +
> > +BlockSize = 0x00001000
> > +NumBlocks = 0x0e00
> > +
> > +0x00000000|0x00280000
> > +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > +FV = FVMAIN_COMPACT
> > +
> > +[FV.FVMAIN_COMPACT]
> > +FvAlignment = 16
> > +ERASE_POLARITY = 1
> > +MEMORY_MAPPED = TRUE
> > +STICKY_WRITE = TRUE
> > +LOCK_CAP = TRUE
> > +LOCK_STATUS = TRUE
> > +WRITE_DISABLED_CAP = TRUE
> > +WRITE_ENABLED_CAP = TRUE
> > +WRITE_STATUS = TRUE
> > +WRITE_LOCK_CAP = TRUE
> > +WRITE_LOCK_STATUS = TRUE
> > +READ_DISABLED_CAP = TRUE
> > +READ_ENABLED_CAP = TRUE
> > +READ_STATUS = TRUE
> > +READ_LOCK_CAP = TRUE
> > +READ_LOCK_STATUS = TRUE
> > +
> > + INF StandaloneMmPkg/Core/StandaloneMmCore.inf
> > + INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> > +
> > +################################################################################
> > +#
> > +# Rules are use with the [FV] section's module INF type to define
> > +# how an FFS file is created for a given INF file. The following Rule are the default
> > +# rules for the different module type. User can add the customized rules to define the
> > +# content of the FFS file.
> > +#
> > +################################################################################
> > +
> > +
> > +############################################################################
> > +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
> > +############################################################################
> > +#
> > +#[Rule.Common.DXE_DRIVER]
> > +# FILE DRIVER = $(NAMED_GUID) {
> > +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> > +# COMPRESS PI_STD {
> > +# GUIDED {
> > +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > +# UI STRING="$(MODULE_NAME)" Optional
> > +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> > +# }
> > +# }
> > +# }
> > +#
> > +############################################################################
> > +
> > +[Rule.Common.MM_CORE_STANDALONE]
> > + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> > + PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> > + }
> > +
> > +[Rule.Common.MM_STANDALONE]
> > + FILE MM_STANDALONE = $(NAMED_GUID) {
> > + SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > + UI STRING="$(MODULE_NAME)" Optional
> > + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> > + }
> >
>
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-06-15 1:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-11 23:51 [PATCH edk2-platforms 1/1] SbsaQemu: Build infrastructure for StandaloneMm image Masahisa Kojima
2020-06-12 16:20 ` [edk2-devel] " Ard Biesheuvel
2020-06-15 1:35 ` Masahisa Kojima
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox