From: "Leif Lindholm" <leif@nuviainc.com>
To: devel@edk2.groups.io, huangming23@huawei.com
Cc: ard.biesheuvel@linaro.org, lidongzhan@huawei.com,
songdongkuang@huawei.com, wanghuiqiang@huawei.com,
qiuliangen@huawei.com, shenlimei@huawei.com,
xiewenyi2@huawei.com
Subject: Re: [edk2-devel] [PATCH edk2-platforms v3 3/4] Silicon/Hisilicon/Acpi: Add update sas address feature
Date: Tue, 16 Jun 2020 15:20:06 +0100 [thread overview]
Message-ID: <20200616142006.GE6739@vanye> (raw)
In-Reply-To: <1591709245-44527-4-git-send-email-huangming23@huawei.com>
One remaining question, then this set is ready to go in:
On Tue, Jun 09, 2020 at 21:27:24 +0800, Ming Huang wrote:
> The updating sas address feature is similar with apdating mac address.
> Modify updating dsdt flow for add this feature.
>
> Signed-off-by: Ming Huang <huangming23@huawei.com>
> ---
> Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatform.c | 2 +-
> Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatformDxe.inf | 1 +
> Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.c | 292 +++++++++++++++-----
> Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.h | 2 +-
> 4 files changed, 227 insertions(+), 70 deletions(-)
>
> diff --git a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatform.c b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatform.c
> index c45a0bb..9cdf710 100644
> --- a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatform.c
> +++ b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatform.c
> @@ -46,7 +46,7 @@ UpdateAcpiDsdt (
> return;
> }
>
> - Status = EthMacInit ();
> + Status = UpdateAcpiDsdtTable ();
> if (EFI_ERROR (Status)) {
> DEBUG ((DEBUG_ERROR, " UpdateAcpiDsdtTable Failed, Status = %r\n", Status));
> }
> diff --git a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatformDxe.inf b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatformDxe.inf
> index 866ff75..856309a 100644
> --- a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatformDxe.inf
> +++ b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/AcpiPlatformDxe.inf
> @@ -46,6 +46,7 @@
> gEfiAcpiTableProtocolGuid # PROTOCOL ALWAYS_CONSUMED
> gEfiAcpiSdtProtocolGuid # PROTOCOL ALWAYS_CONSUMED
> gHisiBoardNicProtocolGuid # PROTOCOL ALWAYS_CONSUMED
> + gHisiSasConfigProtocolGuid
>
> [FeaturePcd]
> gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol
> diff --git a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.c b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.c
> index cd98506..841c94e 100644
> --- a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.c
> +++ b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.c
> @@ -1,7 +1,7 @@
> /** @file
>
> Copyright (c) 2014, Applied Micro Curcuit Corporation. All rights reserved.<BR>
> - Copyright (c) 2015, Hisilicon Limited. All rights reserved.<BR>
> + Copyright (c) 2015 - 2020, Hisilicon Limited. All rights reserved.<BR>
> Copyright (c) 2015, Linaro Limited. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -23,6 +23,7 @@
> #include <Library/UefiBootServicesTableLib.h>
> #include <Protocol/AcpiSystemDescriptionTable.h>
> #include <Library/DebugLib.h>
> +#include <Library/MemoryAllocationLib.h>
> #include <Library/PcdLib.h>
> #include <Library/PrintLib.h>
> #include <Library/DebugLib.h>
> @@ -32,6 +33,7 @@
> #include <IndustryStandard/AcpiAml.h>
>
> #include <Protocol/HisiBoardNicProtocol.h>
> +#include <Protocol/HisiSasConfig.h>
>
> // Turn on debug message by enabling below define
> //#define ACPI_DEBUG
> @@ -45,17 +47,27 @@
> #define EFI_ACPI_MAX_NUM_TABLES 20
> #define DSDT_SIGNATURE 0x54445344
>
> -#define D03_ACPI_ETH_ID "HISI00C2"
> -
> #define ACPI_ETH_MAC_KEY "local-mac-address"
> +#define ACPI_ETH_SAS_KEY "sas-addr"
>
> #define PREFIX_VARIABLE_NAME L"MAC"
> #define PREFIX_VARIABLE_NAME_COMPAT L"RGMII_MAC"
> -#define MAC_MAX_LEN 30
> +#define ADDRESS_MAX_LEN 30
> +
> +CHAR8 *mHisiAcpiDevId[] = {"HISI00C1","HISI00C2","HISI0162"};
> +
> +typedef enum {
> + DsdtDeviceUnknown,
> + DsdtDeviceLan,
> + DsdtDeviceSas
> +} DSDT_DEVICE_TYPE;
>
> -EFI_STATUS GetEnvMac(
> - IN UINTN MacNextID,
> - IN OUT UINT8 *MacBuffer)
> +STATIC
> +EFI_STATUS
> +GetEnvMac(
> + IN UINTN MacNextID,
> + IN OUT UINT8 *MacBuffer
> + )
> {
> EFI_MAC_ADDRESS Mac;
> EFI_STATUS Status;
> @@ -89,12 +101,121 @@ EFI_STATUS GetEnvMac(
> return EFI_SUCCESS;
> }
>
> -EFI_STATUS _SearchReplacePackageMACAddress(
> +STATIC
> +EFI_STATUS
> +GetSasAddress (
> + IN UINT8 Index,
> + IN OUT UINT8 *SasAddrBuffer
> + )
> +{
> + EFI_STATUS Status;
> + HISI_SAS_CONFIG_PROTOCOL *HisiSasConf;
> +
> + if (SasAddrBuffer == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + Status = gBS->LocateProtocol (&gHisiSasConfigProtocolGuid, NULL, (VOID **)&HisiSasConf);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "Locate Sas Config Protocol failed %r\n", Status));
> + SasAddrBuffer[0] = 0x50;
> + SasAddrBuffer[1] = 0x01;
> + SasAddrBuffer[2] = 0x88;
> + SasAddrBuffer[3] = 0x20;
> + SasAddrBuffer[4] = 0x16;
> + SasAddrBuffer[5] = 0x00;
> + SasAddrBuffer[6] = 0x00;
> + SasAddrBuffer[7] = Index;
This is still a sompletely random-looking value being stuffed into the
buffer. What is it?
/
Leif
> + return Status;
> + }
> +
> + return HisiSasConf->GetAddr (Index, SasAddrBuffer);
> +}
> +
> +STATIC
> +EFI_STATUS
> +UpdateAddressInOption (
> + IN EFI_ACPI_SDT_PROTOCOL *AcpiTableProtocol,
> + IN EFI_ACPI_HANDLE ChildHandle,
> + IN UINTN DevNextID,
> + IN DSDT_DEVICE_TYPE FoundDev
> + )
> +{
> + EFI_STATUS Status;
> + EFI_ACPI_DATA_TYPE DataType;
> + CONST VOID *Buffer;
> + UINTN DataSize;
> + UINTN Count;
> + EFI_ACPI_HANDLE CurrentHandle;
> + UINT8 *AddressBuffer;
> + UINT8 AddressByte;
> +
> + AddressByte = 0;
> + AddressBuffer = AllocateZeroPool (ADDRESS_MAX_LEN);
> + if (AddressBuffer == NULL) {
> + DEBUG ((DEBUG_ERROR, "%a:%d AllocateZeroPool failed\n", __FILE__, __LINE__));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + switch (FoundDev) {
> + case DsdtDeviceLan:
> + //Update the MAC
> + Status = GetEnvMac (DevNextID, AddressBuffer);
> + AddressByte = 6;
> + break;
> + case DsdtDeviceSas:
> + //Update SAS Address.
> + Status = GetSasAddress (DevNextID, AddressBuffer);
> + AddressByte = 8;
> + break;
> + default:
> + Status = EFI_INVALID_PARAMETER;
> + }
> + if (EFI_ERROR (Status)) {
> + FreePool (AddressBuffer);
> + return Status;
> + }
> +
> + for (Count = 0; Count < AddressByte; Count++) {
> + Status = AcpiTableProtocol->GetOption (CurrentHandle, 1, &DataType, &Buffer, &DataSize);
> + if (EFI_ERROR (Status)) {
> + break;
> + }
> +
> + if (DataType != EFI_ACPI_DATA_TYPE_UINT)
> + break;
> +
> + // only need one byte.
> + // FIXME: Assume the CPU is little endian
> + Status = AcpiTableProtocol->SetOption (
> + CurrentHandle,
> + 1,
> + AddressBuffer + Count,
> + sizeof(UINT8));
> + if (EFI_ERROR (Status)) {
> + break;
> + }
> +
> + Status = AcpiTableProtocol->GetChild (ChildHandle, &CurrentHandle);
> + if (EFI_ERROR (Status) || CurrentHandle == NULL) {
> + break;
> + }
> + }
> +
> + FreePool (AddressBuffer);
> + return Status;
> +}
> +
> +STATIC
> +EFI_STATUS
> +UpdateAddressInPackage (
> IN EFI_ACPI_SDT_PROTOCOL *AcpiTableProtocol,
> IN EFI_ACPI_HANDLE ChildHandle,
> IN UINTN Level,
> IN OUT BOOLEAN *Found,
> - IN UINTN MacNextID)
> + IN UINTN DevNextID,
> + IN DSDT_DEVICE_TYPE FoundDev
> + )
> {
> // ASL template for ethernet driver:
> /*
> @@ -114,15 +235,18 @@ EFI_STATUS _SearchReplacePackageMACAddress(
> CONST UINT8 *Data;
> CONST VOID *Buffer;
> UINTN DataSize;
> - UINTN Count;
> EFI_ACPI_HANDLE CurrentHandle;
> EFI_ACPI_HANDLE NextHandle;
> - UINT8 MACBuffer[MAC_MAX_LEN];
> + EFI_ACPI_HANDLE Level1Handle;
>
> DBG("In Level:%d\n", Level);
> + Level1Handle = NULL;
> Status = EFI_SUCCESS;
> for (CurrentHandle = NULL; ;) {
> Status = AcpiTableProtocol->GetChild(ChildHandle, &CurrentHandle);
> + if (Level == 1) {
> + Level1Handle = CurrentHandle;
> + }
> if (Level != 3 && (EFI_ERROR(Status) || CurrentHandle == NULL))
> break;
>
> @@ -143,11 +267,14 @@ EFI_STATUS _SearchReplacePackageMACAddress(
> DataSize, Data[0], DataSize > 1 ? Data[1] : 0);
>
> Data = Buffer;
> - if (DataType != EFI_ACPI_DATA_TYPE_STRING
> - || AsciiStrCmp((CHAR8 *) Data, ACPI_ETH_MAC_KEY) != 0)
> + if ((DataType != EFI_ACPI_DATA_TYPE_STRING) ||
> + ((AsciiStrCmp ((CHAR8 *) Data, ACPI_ETH_MAC_KEY) != 0) &&
> + (AsciiStrCmp ((CHAR8 *) Data, ACPI_ETH_SAS_KEY) != 0))) {
> + ChildHandle = Level1Handle;
> continue;
> + }
>
> - DBG("_DSD Key Type %d. Found MAC address key\n", DataType);
> + DBG("_DSD Key Type %d. Found address key\n", DataType);
>
> //
> // We found the node.
> @@ -157,33 +284,7 @@ EFI_STATUS _SearchReplacePackageMACAddress(
> }
>
> if (Level == 3 && *Found) {
> -
> - //Update the MAC
> - Status = GetEnvMac(MacNextID, MACBuffer);
> - if (EFI_ERROR(Status))
> - break;
> -
> - for (Count = 0; Count < 6; Count++) {
> - Status = AcpiTableProtocol->GetOption(CurrentHandle, 1, &DataType, &Buffer, &DataSize);
> - if (EFI_ERROR(Status))
> - break;
> -
> - Data = Buffer;
> - DBG(" _DSD Child Subnode Store Op Code 0x%02X 0x%02X %02X DataType 0x%X\n",
> - DataSize, Data[0], DataSize > 1 ? Data[1] : 0, DataType);
> -
> - if (DataType != EFI_ACPI_DATA_TYPE_UINT)
> - break;
> -
> - // only need one byte.
> - // FIXME: Assume the CPU is little endian
> - Status = AcpiTableProtocol->SetOption(CurrentHandle, 1, (VOID *)&MACBuffer[Count], sizeof(UINT8));
> - if (EFI_ERROR(Status))
> - break;
> - Status = AcpiTableProtocol->GetChild(ChildHandle, &CurrentHandle);
> - if (EFI_ERROR(Status) || CurrentHandle == NULL)
> - break;
> - }
> + Status = UpdateAddressInOption (AcpiTableProtocol, ChildHandle, DevNextID, FoundDev);
> break;
> }
>
> @@ -192,7 +293,13 @@ EFI_STATUS _SearchReplacePackageMACAddress(
>
> //Search next package
> AcpiTableProtocol->Open((VOID *) Buffer, &NextHandle);
> - Status = _SearchReplacePackageMACAddress(AcpiTableProtocol, NextHandle, Level + 1, Found, MacNextID);
> + Status = UpdateAddressInPackage (
> + AcpiTableProtocol,
> + NextHandle,
> + Level + 1,
> + Found,
> + DevNextID,
> + FoundDev);
> AcpiTableProtocol->Close(NextHandle);
> if (!EFI_ERROR(Status))
> break;
> @@ -201,22 +308,28 @@ EFI_STATUS _SearchReplacePackageMACAddress(
> return Status;
> }
>
> -EFI_STATUS SearchReplacePackageMACAddress(
> +STATIC
> +EFI_STATUS
> +SearchReplacePackageAddress (
> IN EFI_ACPI_SDT_PROTOCOL *AcpiTableProtocol,
> IN EFI_ACPI_HANDLE ChildHandle,
> - IN UINTN MacNextID)
> + IN UINTN DevNextID,
> + IN DSDT_DEVICE_TYPE FoundDev
> + )
> {
> BOOLEAN Found = FALSE;
> UINTN Level = 0;
>
> - return _SearchReplacePackageMACAddress(AcpiTableProtocol, ChildHandle, Level, &Found, MacNextID);
> + return UpdateAddressInPackage (AcpiTableProtocol, ChildHandle, Level,
> + &Found, DevNextID, FoundDev);
> }
>
> EFI_STATUS
> -GetEthID (
> +GetDeviceInfo (
> EFI_ACPI_SDT_PROTOCOL *AcpiTableProtocol,
> EFI_ACPI_HANDLE ChildHandle,
> - UINTN *EthID
> + UINTN *DevID,
> + DSDT_DEVICE_TYPE *FoundDev
> )
> {
> EFI_STATUS Status;
> @@ -225,7 +338,7 @@ GetEthID (
> CONST VOID *Buffer;
> UINTN DataSize;
>
> - // Get NameString ETHx
> + // Get NameString
> Status = AcpiTableProtocol->GetOption (ChildHandle, 1, &DataType, &Buffer, &DataSize);
> if (EFI_ERROR (Status)) {
> DEBUG ((EFI_D_ERROR, "[%a:%d] Get NameString failed: %r\n", __FUNCTION__, __LINE__, Status));
> @@ -236,14 +349,23 @@ GetEthID (
> DBG("Size %p Data %02x %02x %02x %02x\n", DataSize, Data[0], Data[1], Data[2], Data[3]);
>
> Data[4] = '\0';
> - if (DataSize != 4 ||
> - AsciiStrnCmp ("ETH", Data, 3) != 0 ||
> - Data[3] > '9' || Data[3] < '0') {
> - DEBUG ((EFI_D_ERROR, "[%a:%d] The NameString %a is not ETHn\n", __FUNCTION__, __LINE__, Data));
> + if ((DataSize != 4) ||
> + (Data[3] > '9' || Data[3] < '0')) {
> + DEBUG ((DEBUG_ERROR, "The NameString %a is not ETHn or SASn\n", Data));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (AsciiStrnCmp ("ETH", Data, 3) == 0) {
> + *FoundDev = DsdtDeviceLan;
> + } else if (AsciiStrnCmp ("SAS", Data, 3) == 0) {
> + *FoundDev = DsdtDeviceSas;
> + } else {
> + DEBUG ((DEBUG_ERROR, "[%a:%d] The NameString %a is not ETHn or SASn\n",
> + __FUNCTION__, __LINE__, Data));
> return EFI_INVALID_PARAMETER;
> }
>
> - *EthID = Data[3] - '0';
> + *DevID = Data[3] - '0';
> return EFI_SUCCESS;
> }
>
> @@ -257,8 +379,10 @@ EFI_STATUS ProcessDSDTDevice (
> CONST VOID *Buffer;
> UINTN DataSize;
> EFI_ACPI_HANDLE DevHandle;
> - INTN Found = 0;
> - UINTN MacNextID;
> + DSDT_DEVICE_TYPE FoundDev = DsdtDeviceUnknown;
> + UINTN DevNextID;
> + BOOLEAN HisiAcpiDevNotFound;
> + UINTN Index;
>
> Status = AcpiTableProtocol->GetOption(ChildHandle, 0, &DataType, &Buffer, &DataSize);
> if (EFI_ERROR(Status))
> @@ -280,7 +404,7 @@ EFI_STATUS ProcessDSDTDevice (
> break;
>
> //
> - // Search for _HID with Ethernet ID
> + // Search for _HID with Device ID
> //
> Status = AcpiTableProtocol->GetOption(DevHandle, 0, &DataType, &Buffer, &DataSize);
> if (EFI_ERROR(Status))
> @@ -312,23 +436,34 @@ EFI_STATUS ProcessDSDTDevice (
> DBG("[%a:%d] - _HID = %a\n", __FUNCTION__, __LINE__, Data);
>
> if (EFI_ERROR(Status) ||
> - DataType != EFI_ACPI_DATA_TYPE_STRING ||
> - (AsciiStrCmp((CHAR8 *) Data, D03_ACPI_ETH_ID) != 0)) {
> - AcpiTableProtocol->Close(ValueHandle);
> - Found = 0;
> + DataType != EFI_ACPI_DATA_TYPE_STRING) {
> + AcpiTableProtocol->Close (ValueHandle);
> + FoundDev = DsdtDeviceUnknown;
> + continue;
> + }
> +
> + HisiAcpiDevNotFound = TRUE;
> + for (Index = 0; Index < ARRAY_SIZE (mHisiAcpiDevId); Index++) {
> + if (AsciiStrCmp ((CHAR8 *)Data, mHisiAcpiDevId[Index]) == 0) {
> + HisiAcpiDevNotFound = FALSE;
> + break;
> + }
> + }
> + if (HisiAcpiDevNotFound) {
> + AcpiTableProtocol->Close (ValueHandle);
> + FoundDev = DsdtDeviceUnknown;
> continue;
> }
>
> - DBG("Found Ethernet device\n");
> + DBG("Found device\n");
> AcpiTableProtocol->Close(ValueHandle);
> - Status = GetEthID (AcpiTableProtocol, ChildHandle, &MacNextID);
> + Status = GetDeviceInfo (AcpiTableProtocol, ChildHandle, &DevNextID, &FoundDev);
> if (EFI_ERROR (Status)) {
> continue;
> }
> - Found = 1;
> - } else if (Found == 1 && AsciiStrnCmp((CHAR8 *) Data, "_DSD", 4) == 0) {
> + } else if ((FoundDev != DsdtDeviceUnknown) && AsciiStrnCmp((CHAR8 *) Data, "_DSD", 4) == 0) {
> //
> - // Patch MAC address for open source kernel
> + // Patch DSD data
> //
> EFI_ACPI_HANDLE PkgHandle;
> Status = AcpiTableProtocol->GetOption(DevHandle, 2, &DataType, &Buffer, &DataSize);
> @@ -351,12 +486,30 @@ EFI_STATUS ProcessDSDTDevice (
> //
> // Walk the _DSD node
> //
> - if (DataSize == 1 && Data[0] == AML_PACKAGE_OP)
> - Status = SearchReplacePackageMACAddress(AcpiTableProtocol, PkgHandle, MacNextID);
> + if (DataSize == 1 && Data[0] == AML_PACKAGE_OP) {
> + Status = SearchReplacePackageAddress (AcpiTableProtocol, PkgHandle, DevNextID, FoundDev);
> + }
>
> AcpiTableProtocol->Close(PkgHandle);
> + } else if (AsciiStrnCmp ((CHAR8 *) Data, "_ADR", 4) == 0) {
> + Status = AcpiTableProtocol->GetOption (DevHandle, 2, &DataType, &Buffer, &DataSize);
> + if (EFI_ERROR (Status)) {
> + break;
> + }
> +
> + if (DataType != EFI_ACPI_DATA_TYPE_CHILD) {
> + continue;
> + }
> +
> + Status = GetDeviceInfo (AcpiTableProtocol, ChildHandle, &DevNextID, &FoundDev);
> +
> + if (EFI_ERROR (Status)) {
> + continue;
> + }
> }
> }
> + } else if ((DataSize == 2) && (Data[0] == AML_EXT_OP) && (Data[1] == AML_EXT_DEVICE_OP)) {
> + ProcessDSDTDevice (AcpiTableProtocol, DevHandle);
> }
> }
>
> @@ -457,7 +610,10 @@ AcpiCheckSum (
> Buffer[ChecksumOffset] = CalculateCheckSum8 (Buffer, Table->Length);
> }
>
> -EFI_STATUS EthMacInit(void)
> +EFI_STATUS
> +UpdateAcpiDsdtTable (
> + VOID
> + )
> {
> EFI_STATUS Status;
> EFI_ACPI_SDT_PROTOCOL *AcpiTableProtocol;
> diff --git a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.h b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.h
> index 0a3e811..a7e1eed 100644
> --- a/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.h
> +++ b/Silicon/Hisilicon/Drivers/AcpiPlatformDxe/EthMac.h
> @@ -10,7 +10,7 @@
> #ifndef _ETH_MAC_H_
> #define _ETH_MAC_H_
>
> -EFI_STATUS EthMacInit(VOID);
> +EFI_STATUS UpdateAcpiDsdtTable (VOID);
>
> #endif
>
> --
> 2.8.1
>
>
>
>
next prev parent reply other threads:[~2020-06-16 14:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 13:27 [PATCH edk2-platforms v3 0/4] Improve D0x Ming Huang
2020-06-09 13:27 ` [PATCH edk2-platforms v3 1/4] Silicon/Hisilicon: Change updating dsdt in ready to boot event Ming Huang
2020-06-09 13:27 ` [PATCH edk2-platforms v3 2/4] Silicon/Hisilicon: Add HISI_SAS_CONFIG_PROTOCOL Ming Huang
2020-06-09 13:27 ` [PATCH edk2-platforms v3 3/4] Silicon/Hisilicon/Acpi: Add update sas address feature Ming Huang
2020-06-16 14:20 ` Leif Lindholm [this message]
2020-06-17 2:07 ` [edk2-devel] " Ming Huang
2020-06-17 11:07 ` Leif Lindholm
2020-06-17 11:23 ` Ming Huang
2020-06-17 12:07 ` Leif Lindholm
2020-06-09 13:27 ` [PATCH edk2-platforms v3 4/4] Silicon/Hisilicon: Rename EthMac files Ming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200616142006.GE6739@vanye \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox