* [PATCH v3 00/15] Kvmtool guest firmware support for Arm
@ 2020-06-24 13:34 Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
` (14 more replies)
0 siblings, 15 replies; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, philmd, ray.ni,
michael.d.kinney, liming.gao, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Kvmtool is a virtual machine manager that can be used to launch
guest partitions. Kvmtool additionally supports emulation of
hardware like the RTC, CFI etc. essentially providing an
emulated platform for a Guest OS to run.
To boot a standards-based OS one would need UEFI. In this case
it is UEFI at EL1 or guest/virtual firmware.
Kvmtool has been enhanced to enable launching of KVM guests with
UEFI support e.g. CFI emulation has been added to store UEFI
variables, etc. These changes have been merged in the kvmtool
repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/will/kvmtool.git
This patch series:
- adds UEFI guest firmware support for the Kvmtool emulated
Arm platform.
- addresses the review feedback for the v2 series discussed
on the mailing list at:
https://edk2.groups.io/g/devel/message/59503
The changes for the v3 series can be seen at:
https://github.com/samimujawar/edk2/tree/299_kvmtool_plat_support_v3
Sami Mujawar (15):
PcAtChipsetPkg: Add MMIO Support to RTC driver
ArmVirtPkg: Add Kvmtool RTC Fdt Client Library
ArmPlatformPkg: Dynamic flash variable base
ArmVirtPkg: Add kvmtool platform driver
ArmVirtPkg: kvmtool platform memory map
ArmVirtPkg: Add Kvmtool NOR flash lib
ArmVirtPkg: Early serial port initialisation
MdeModulePkg: Fix constructor invocation ordering
ArmVirtPkg: GUID Hob for 16550 UART base address
ArmVirtPkg: 16550 UART Platform hook library
ArmVirtPkg: Add Kvmtool Platform Pei Lib
ArmVirtPkg: Support for kvmtool virtual platform
ArmVirtPkg: Package dependency for MC146818 RTC
ArmVirtPkg: Add kvmtool to package dictionary
Maintainer.txt: Add Kvmtool platform reviewer
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c | 4 +-
ArmVirtPkg/ArmVirtKvmTool.dsc | 345 ++++++++++++++++++++
ArmVirtPkg/ArmVirtKvmTool.fdf | 259 +++++++++++++++
ArmVirtPkg/ArmVirtPkg.ci.yaml | 6 +-
ArmVirtPkg/ArmVirtPkg.dec | 2 +
ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h | 22 ++
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c | 85 +++++
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf | 47 +++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c | 138 ++++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf | 36 ++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c | 57 ++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf | 39 +++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni | 14 +
ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c | 78 +++++
ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf | 48 +++
ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c | 255 +++++++++++++++
ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf | 42 +++
ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c | 128 ++++++++
ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf | 42 +++
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330 +++++++++++++++++++
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
ArmVirtPkg/PrePi/PrePi.c | 10 +-
Maintainers.txt | 10 +
MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c | 17 +
MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | 3 +
PcAtChipsetPkg/PcAtChipsetPkg.dec | 16 +
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 119 ++++++-
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h | 31 ++
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c | 72 +++-
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf | 8 +
30 files changed, 2288 insertions(+), 24 deletions(-)
create mode 100644 ArmVirtPkg/ArmVirtKvmTool.dsc
create mode 100644 ArmVirtPkg/ArmVirtKvmTool.fdf
create mode 100644 ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
create mode 100644 ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
create mode 100644 ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
create mode 100644 ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
create mode 100644 ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
create mode 100644 ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
create mode 100644 ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
create mode 100644 ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
create mode 100644 ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
create mode 100644 ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
create mode 100644 ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
create mode 100644 ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
create mode 100644 ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c
create mode 100644 ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
create mode 100644 ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
create mode 100644 ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 11:24 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
` (13 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, ray.ni, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Some virtual machine managers like Kvmtool emulate the MC146818
RTC controller in the MMIO space so that architectures that do
not support I/O Mapped I/O can use the RTC. This patch adds MMIO
support to the RTC controller driver.
The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
If PcdRtcUseMmio is:
TRUE - Indicates the RTC port registers are in MMIO space.
FALSE - Indicates the RTC port registers are in I/O space.
Default is I/O space.
Additionally two new PCDs PcdRtcIndexRegister64 and
PcdRtcTargetRegister64 have been introduced to provide the base
address for the RTC registers in the MMIO space.
When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
converts the pointers to the RTC MMIO registers so that the
RTC registers are accessible post ExitBootServices.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
Notes:
v3:
- Make PcdRtcUseMmio a feature PCD. [Sami]
- Read the RTC MMIO base address from the DT. [Andre]
- Introduce PCDs for RTC Index and Target register base [Sami]
address in the MMIO space.
- Move RTC MMIO region mapping code to a separate platform [Sami]
specific library. This library also reads the base addresses
for the RTC from DT and configures the RTC Index and Target
register PCDs.
Ref: https://edk2.groups.io/g/devel/topic/74200905#60307
v2:
- Code review comments incorporated. [Sami]
v1:
- Add support to read/write from RTC registers using MMIO access [Sami]
- Use wrapper functions for RtcRead/Write accessors [Leif]
Ref: https://edk2.groups.io/g/devel/topic/30915281#30695
PcAtChipsetPkg/PcAtChipsetPkg.dec | 16 +++
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 119 +++++++++++++++++---
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h | 31 +++++
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c | 72 +++++++++++-
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf | 8 ++
5 files changed, 230 insertions(+), 16 deletions(-)
diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec b/PcAtChipsetPkg/PcAtChipsetPkg.dec
index 88de5cceea593176c3a2425a5963b66b789f2b9e..ed2d95550b8d153995b30cdc290cf3bb905e211b 100644
--- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
+++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
@@ -6,6 +6,7 @@
#
# Copyright (c) 2009 - 2019, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -41,6 +42,13 @@ [PcdsFeatureFlag]
# @Prompt Configure HPET to use MSI.
gPcAtChipsetPkgTokenSpaceGuid.PcdHpetMsiEnable|TRUE|BOOLEAN|0x00001000
+ ## Indicates the RTC port registers are in MMIO space, or in I/O space.
+ # Default is I/O space.<BR><BR>
+ # TRUE - RTC port registers are in MMIO space.<BR>
+ # FALSE - RTC port registers are in I/O space.<BR>
+ # @Prompt RTC port registers use MMIO.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|FALSE|BOOLEAN|0x00000021
+
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
## This PCD specifies the base address of the HPET timer.
# @Prompt HPET base address.
@@ -68,6 +76,14 @@ [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
# @Expression 0x80000001 | gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear < gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x0000000E
+ ## Specifies RTC Index Register address in MMIO space.
+ # @Prompt RTC Index Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0|UINT64|0x00000022
+
+ ## Specifies RTC Target Register address in MMIO space.
+ # @Prompt RTC Target Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0|UINT64|0x00000023
+
[PcdsFixedAtBuild, PcdsPatchableInModule]
## Defines the ACPI register set base address.
# The invalid 0xFFFF is as its default value. It must be configured to the real value.
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
index 52af17941786ef81c3911512ee64551724e67209..5ddc06549103ce9944054d3a05b73803f7037ec2 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
@@ -3,6 +3,7 @@
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -10,6 +11,9 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include "PcRtc.h"
+extern UINTN mRtcIndexRegister;
+extern UINTN mRtcTargetRegister;
+
//
// Days of month.
//
@@ -21,6 +25,28 @@ UINTN mDayOfMonth[] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
CHAR16 mTimeZoneVariableName[] = L"RTC";
/**
+ A function pointer that evaluates to a function that reads the RTC content
+ through its registers either using IO or MMIO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+
+ @return The data of UINT8 type read from RTC.
+**/
+RTC_READ RtcRead;
+
+/**
+ A function pointer that evaluates to a function that reads the RTC content
+ through its registers either using IO or MMIO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+
+ @return The data of UINT8 type read from RTC.
+**/
+RTC_WRITE RtcWrite;
+
+/**
Compare the Hour, Minute and Second of the From time and the To time.
Only compare H/M/S in EFI_TIME and ignore other fields here.
@@ -54,41 +80,96 @@ IsWithinOneDay (
);
/**
- Read RTC content through its registers.
+ Read RTC content through its registers using IO access.
- @param Address Address offset of RTC. It is recommended to use macros such as
- RTC_ADDRESS_SECONDS.
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
@return The data of UINT8 type read from RTC.
**/
+STATIC
UINT8
-RtcRead (
- IN UINT8 Address
+EFIAPI
+IoRtcRead (
+ IN UINTN Address
)
{
- IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
+ IoWrite8 (
+ PcdGet8 (PcdRtcIndexRegister),
+ (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
+ );
return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
}
/**
- Write RTC through its registers.
+ Write RTC through its registers using IO access.
- @param Address Address offset of RTC. It is recommended to use macros such as
- RTC_ADDRESS_SECONDS.
- @param Data The content you want to write into RTC.
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+ @param Data The content you want to write into RTC.
**/
+STATIC
VOID
-RtcWrite (
- IN UINT8 Address,
+EFIAPI
+IoRtcWrite (
+ IN UINTN Address,
IN UINT8 Data
)
{
- IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
+ IoWrite8 (
+ PcdGet8 (PcdRtcIndexRegister),
+ (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
+ );
IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
}
/**
+ Read RTC content through its registers using MMIO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+
+ @return The data of UINT8 type read from RTC.
+**/
+STATIC
+UINT8
+EFIAPI
+MmioRtcRead (
+ IN UINTN Address
+ )
+{
+ MmioWrite8 (
+ mRtcIndexRegister,
+ (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
+ );
+ return MmioRead8 (mRtcTargetRegister);
+}
+
+/**
+ Write RTC through its registers using MMIO access.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+ @param Data The content you want to write into RTC.
+
+**/
+STATIC
+VOID
+EFIAPI
+MmioRtcWrite (
+ IN UINTN Address,
+ IN UINT8 Data
+ )
+{
+ MmioWrite8 (
+ mRtcIndexRegister,
+ (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
+ );
+ MmioWrite8 (mRtcTargetRegister, Data);
+}
+
+/**
Initialize RTC.
@param Global For global use inside this module.
@@ -113,6 +194,18 @@ PcRtcInit (
BOOLEAN Pending;
//
+ // Initialize the RtcRead and RtcWrite functions
+ // based on the chosen IO/MMIO access.
+ //
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ RtcRead = MmioRtcRead;
+ RtcWrite = MmioRtcWrite;
+ } else {
+ RtcRead = IoRtcRead;
+ RtcWrite = IoRtcWrite;
+ }
+
+ //
// Acquire RTC Lock to make access to RTC atomic
//
if (!EfiAtRuntime ()) {
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
index 47293ce44c5a1f4792892892f7da40d7f0a5a001..4074261c2ca5dbc7b0727ea7961154eaf41c0e38 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
@@ -3,6 +3,7 @@
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+Copyright (c) 2019 - 2020, ARM Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -371,4 +372,34 @@ PcRtcAcpiTableChangeCallback (
IN EFI_EVENT Event,
IN VOID *Context
);
+
+/**
+ Function pointer to Read RTC content through its registers.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+
+ @return The data of UINT8 type read from RTC.
+**/
+typedef
+UINT8
+(EFIAPI *RTC_READ) (
+ IN UINTN Address
+ );
+
+/**
+ Function pointer to Write RTC through its registers.
+
+ @param Address Address offset of RTC. It is recommended to use
+ macros such as RTC_ADDRESS_SECONDS.
+ @param Data The content you want to write into RTC.
+
+**/
+typedef
+VOID
+(EFIAPI *RTC_WRITE) (
+ IN UINTN Address,
+ IN UINT8 Data
+ );
+
#endif
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
index ccda6331373bfe4069b0a59495b5e5cc731c8fc8..e30883e53333aae655bbf891f86d1a6ed739715f 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
@@ -2,16 +2,33 @@
Provides Set/Get time operations.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
+#include <Library/DxeServicesTableLib.h>
#include "PcRtc.h"
PC_RTC_MODULE_GLOBALS mModuleGlobal;
EFI_HANDLE mHandle = NULL;
+STATIC EFI_EVENT mVirtualAddrChangeEvent;
+
+UINTN mRtcIndexRegister;
+UINTN mRtcTargetRegister;
+
+//
+// Function pointer for the Rtc Read interface function
+//
+extern RTC_READ RtcRead;
+
+//
+// Function pointer for the Rtc Write interface function
+//
+extern RTC_WRITE RtcWrite;
+
/**
Returns the current time and date information, and the time-keeping capabilities
of the hardware platform.
@@ -106,6 +123,34 @@ PcRtcEfiSetWakeupTime (
}
/**
+ Fixup internal data so that EFI can be called in virtual mode.
+ Call the passed in Child Notify event and convert any pointers in
+ lib to virtual mode.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+VOID
+EFIAPI
+LibRtcVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ // Only needed if you are going to support the OS calling RTC functions in
+ // virtual mode. You will need to call EfiConvertPointer (). To convert any
+ // stored physical addresses to virtual address. After the OS transitions to
+ // calling in virtual mode, all future runtime calls will be made in virtual
+ // mode.
+ EfiConvertPointer (0x0, (VOID**)&mRtcIndexRegister);
+ EfiConvertPointer (0x0, (VOID**)&mRtcTargetRegister);
+
+ // Convert the RtcRead and RtcWrite pointers for runtime use.
+ EfiConvertPointer (0x0, (VOID**)&RtcRead);
+ EfiConvertPointer (0x0, (VOID**)&RtcWrite);
+}
+
+/**
The user Entry Point for PcRTC module.
This is the entry point for PcRTC module. It installs the UEFI runtime service
@@ -125,12 +170,17 @@ InitializePcRtc (
IN EFI_SYSTEM_TABLE *SystemTable
)
{
- EFI_STATUS Status;
- EFI_EVENT Event;
+ EFI_STATUS Status;
+ EFI_EVENT Event;
EfiInitializeLock (&mModuleGlobal.RtcLock, TPL_CALLBACK);
mModuleGlobal.CenturyRtcAddress = GetCenturyRtcAddress ();
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ mRtcIndexRegister = (UINTN)PcdGet64 (PcdRtcIndexRegister64);
+ mRtcTargetRegister = (UINTN)PcdGet64 (PcdRtcTargetRegister64);
+ }
+
Status = PcRtcInit (&mModuleGlobal);
ASSERT_EFI_ERROR (Status);
@@ -165,7 +215,23 @@ InitializePcRtc (
NULL,
NULL
);
- ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+ }
+
+ if (FeaturePcdGet (PcdRtcUseMmio)) {
+ // Register for the virtual address change event
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ LibRtcVirtualNotifyEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &mVirtualAddrChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
return Status;
}
diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
index c73ee98105e510f9e4e23c1a6c1e5c505325d2c9..0d8eca28b65954b073a72fc4fe5ad6247320e79d 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
@@ -6,6 +6,7 @@
#
# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -61,6 +62,11 @@ [Guids]
## SOMETIMES_CONSUMES ## SystemTable
gEfiAcpiTableGuid
+ gEfiEventVirtualAddressChangeGuid
+
+[FeaturePcd]
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio ## CONSUMES
+
[FixedPcd]
gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA ## CONSUMES
gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB ## CONSUMES
@@ -72,6 +78,8 @@ [Pcd]
gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear ## CONSUMES
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister ## CONSUMES
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister ## CONSUMES
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64 ## CONSUMES
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64 ## CONSUMES
[Depex]
gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 11:31 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 03/15] ArmPlatformPkg: Dynamic flash variable base Sami Mujawar
` (12 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Add library that parses the Kvmtool device tree and updates
the dynamic PCDs describing the RTC Memory map.
It also maps the MMIO region used by the RTC as runtime memory
so that the RTC registers are accessible post ExitBootServices.
Since UEFI takes ownership of the RTC hardware disable the RTC
node in the DT to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
Notes:
v3:
- Introduce library to read and map the MMIO base addresses [Sami]
for the RTC registers from the DT and configure the Index
and Target register PCDs.
ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c | 255 ++++++++++++++++++++
ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf | 42 ++++
2 files changed, 297 insertions(+)
diff --git a/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..2f38923187c1a621578413be9c39fa425bde2ed1
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
@@ -0,0 +1,255 @@
+/** @file
+ FDT client library for motorola,mc146818 RTC driver
+
+ Copyright (c) 2020, ARM Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiLib.h>
+#include <Protocol/FdtClient.h>
+#include <Uefi.h>
+
+/** RTC Index register is at offset 0x0
+*/
+#define RTC_INDEX_REG_OFFSET 0x0ULL
+
+/** RTC Target register is at offset 0x1
+*/
+#define RTC_TARGET_REG_OFFSET 0x1ULL
+
+/** Add the RTC controller address range to the memory map.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] RtcPageBase Base address of the RTC controller.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+EFIAPI
+KvmtoolRtcMapMemory (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_PHYSICAL_ADDRESS RtcPageBase
+ )
+{
+ EFI_STATUS Status;
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
+ BOOLEAN MemorySpaceAdded;
+
+ MemorySpaceAdded = FALSE;
+
+ Status = gDS->GetMemorySpaceDescriptor (RtcPageBase, &Descriptor);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR, "Failed to get memory space descriptor. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ if (Descriptor.GcdMemoryType == EfiGcdMemoryTypeNonExistent) {
+ Status = gDS->AddMemorySpace (
+ EfiGcdMemoryTypeMemoryMappedIo,
+ RtcPageBase,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR, "Failed to add memory space. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+ MemorySpaceAdded = TRUE;
+ }
+
+ Status = gDS->AllocateMemorySpace (
+ EfiGcdAllocateAddress,
+ EfiGcdMemoryTypeMemoryMappedIo,
+ 0,
+ EFI_PAGE_SIZE,
+ &RtcPageBase,
+ ImageHandle,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to allocate memory space. Status = %r\n",
+ Status
+ ));
+ if (MemorySpaceAdded) {
+ gDS->RemoveMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ }
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ RtcPageBase,
+ EFI_PAGE_SIZE,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to set memory attributes. Status = %r\n",
+ Status
+ ));
+ gDS->FreeMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ if (MemorySpaceAdded) {
+ gDS->RemoveMemorySpace (
+ RtcPageBase,
+ EFI_PAGE_SIZE
+ );
+ }
+ }
+
+ return Status;
+}
+
+/** Entrypoint for KvmtoolRtcFdtClientLib.
+
+ Locate the RTC node in the DT and update the Index and
+ Target register base addresses in the respective PCDs.
+ Add the RTC memory region to the memory map.
+ Disable the RTC node as the RTC is owned by UEFI.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+EFIAPI
+KvmtoolRtcFdtClientLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ FDT_CLIENT_PROTOCOL *FdtClient;
+ INT32 Node;
+ CONST UINT64 *Reg;
+ UINT32 RegSize;
+ UINT64 RegBase;
+ UINT64 Range;
+ RETURN_STATUS PcdStatus;
+
+ Status = gBS->LocateProtocol (
+ &gFdtClientProtocolGuid,
+ NULL,
+ (VOID **)&FdtClient
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = FdtClient->FindCompatibleNode (
+ FdtClient,
+ "motorola,mc146818",
+ &Node
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: No 'motorola,mc146818' compatible DT node found\n",
+ __FUNCTION__
+ ));
+ return Status;
+ }
+
+ Status = FdtClient->GetNodeProperty (
+ FdtClient,
+ Node,
+ "reg",
+ (CONST VOID **)&Reg,
+ &RegSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: No 'reg' property found in 'motorola,mc146818' compatible DT node\n",
+ __FUNCTION__
+ ));
+ return Status;
+ }
+
+ ASSERT (RegSize == 16);
+
+ RegBase = SwapBytes64 (Reg[0]);
+ Range = SwapBytes64 (Reg[1]);
+ DEBUG ((
+ DEBUG_INFO,
+ "Found motorola,mc146818 RTC @ 0x%Lx Range = 0x%x\n",
+ RegBase,
+ Range
+ ));
+
+ // The address range must cover the RTC Index and the Target registers.
+ ASSERT (Range >= 0x2);
+
+ // RTC Index register is at offset 0x0
+ PcdStatus = PcdSet64S (
+ PcdRtcIndexRegister64,
+ (RegBase + RTC_INDEX_REG_OFFSET)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ // RTC Target register is at offset 0x1
+ PcdStatus = PcdSet64S (
+ PcdRtcTargetRegister64,
+ (RegBase + RTC_TARGET_REG_OFFSET)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ Status = KvmtoolRtcMapMemory (ImageHandle, (RegBase & ~(EFI_PAGE_SIZE - 1)));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "Failed to map memory for motorola,mc146818. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ //
+ // UEFI takes ownership of the RTC hardware, and exposes its functionality
+ // through the UEFI Runtime Services GetTime, SetTime, etc. This means we
+ // need to disable it in the device tree to prevent the OS from attaching
+ // its device driver as well.
+ //
+ Status = FdtClient->SetNodeProperty (
+ FdtClient,
+ Node,
+ "status",
+ "disabled",
+ sizeof ("disabled")
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_WARN,
+ "Failed to set motorola,mc146818 status to 'disabled', Status = %r\n",
+ Status
+ ));
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..0d1b27997ed00d7c1be3578cab4d1d2eba663a90
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
@@ -0,0 +1,42 @@
+#/** @file
+# FDT client library for motorola,mc146818 RTC driver
+#
+# Copyright (c) 2020, ARM Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = KvmtoolRtcFdtClientLib
+ FILE_GUID = 3254B4F7-30B5-48C6-B06A-D8FF97F3EF95
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = KvmtoolRtcFdtClientLib|DXE_DRIVER DXE_RUNTIME_DRIVER
+ CONSTRUCTOR = KvmtoolRtcFdtClientLibConstructor
+
+[Sources]
+ KvmtoolRtcFdtClientLib.c
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ MdePkg/MdePkg.dec
+ PcAtChipsetPkg/PcAtChipsetPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ PcdLib
+ UefiBootServicesTableLib
+ DxeServicesTableLib
+
+[Protocols]
+ gFdtClientProtocolGuid ## CONSUMES
+
+[Pcd]
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64
+
+[Depex]
+ gFdtClientProtocolGuid
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 03/15] ArmPlatformPkg: Dynamic flash variable base
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
` (11 subsequent siblings)
14 siblings, 0 replies; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel; +Cc: Sami Mujawar, ard.biesheuvel, leif, philmd
Some virtual machine managers like kvmtool can relocate
the devices in the system memory map. The information
about the devices location in memory is described in the
device tree. Therefore, the CFI memory region and the
associated Non volatile storage variables need to be
adjusted accordingly.
To support such use cases the non-volatile storage
variable base PCD PcdFlashNvStorageVariableBase has
been defined as a dynamic PCD.
The NOR flash driver was using the Flash non-volatile
storage variable base PCD as a fixed PCD, thereby
preventing runtime resolution of the variable base
address.
Therefore update the NOR flash driver to load the
PCD using PcdGet32 instead of FixedPcdGet32.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
---
Notes:
v3:
- Resend patch with updated series. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200906#60337
v2:
- Add support to make PCD PcdFlashNvStorageVariableBase [Sami]
a dynamic PCD and update NOR flash driver to PcdGet32
instead of FixedPcdGet32.
ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c
index e248fdf6db94191648b5d33bf1a9263f446ee141..9cdd85096a463f69b3b864cecdeaf247e65f4f73 100644
--- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c
+++ b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashFvbDxe.c
@@ -1,6 +1,6 @@
/*++ @file NorFlashFvbDxe.c
- Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.<BR>
+ Copyright (c) 2011 - 2020, ARM Ltd. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -736,7 +736,7 @@ NorFlashFvbInitialize (
EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
ASSERT_EFI_ERROR (Status);
- mFlashNvStorageVariableBase = FixedPcdGet32 (PcdFlashNvStorageVariableBase);
+ mFlashNvStorageVariableBase = PcdGet32 (PcdFlashNvStorageVariableBase);
// Set the index of the first LBA for the FVB
Instance->StartLba = (PcdGet32 (PcdFlashNvStorageVariableBase) - Instance->RegionBaseAddress) / Instance->Media.BlockSize;
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (2 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 03/15] ArmPlatformPkg: Dynamic flash variable base Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 11:35 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 05/15] ArmVirtPkg: kvmtool platform memory map Sami Mujawar
` (10 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Kvmtool is a virtual machine manager that enables
hosting KVM guests. It essentially provides a
virtual hardware platform for guest operating
systems.
Kvmtool hands of a device tree containing the
current hardware configuration to the firmware.
A standards-based operating system would use
ACPI to consume the platform hardware
information, while some operating systems may
prefer to use Device Tree.
The KvmtoolPlatformDxe performs the platform
actions like determining if the firmware should
expose ACPI or the Device Tree based hardware
description to the operating system.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- Don't use CpuDeadLoop()s in your drivers. [Ard]
- Returned error code instead of dead loop. [Sami]
- Installing a protocol on an image handle should not [Ard]
ever fail. So just use ASSERT_EFI_ERROR().
- Added assert and returned status code. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200911#59650
v2:
- Updated according to review comments. [Sami]
v1:
- Add kvmtool platform driver to support loading platform [Sami]
specific information.
- Keep code to initialise the variable storage PCDs in the [Laszlo]
platform-specific FVB driver.
- Document code derived from [Laszlo]
"ArmVirtPkg/PlatformHasAcpiDtDxe"
Ref: https://edk2.groups.io/g/devel/topic/30915278#30757
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c | 85 ++++++++++++++++++++
ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf | 47 +++++++++++
2 files changed, 132 insertions(+)
diff --git a/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
new file mode 100644
index 0000000000000000000000000000000000000000..17a65bdff0c1a5851e45c2a9ede97f76236502e3
--- /dev/null
+++ b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
@@ -0,0 +1,85 @@
+/** @file
+
+ The KvmtoolPlatformDxe performs the platform specific initialization like:
+ - It decides if the firmware should expose ACPI or Device Tree-based
+ hardware description to the operating system.
+
+ Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Guid/VariableFormat.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Protocol/FdtClient.h>
+
+/** Decide if the firmware should expose ACPI tables or Device Tree and
+ install the appropriate protocol interface.
+
+ Note: This function is derived from "ArmVirtPkg/PlatformHasAcpiDtDxe",
+ by dropping the word size check, and the fw_cfg check.
+
+ @param [in] ImageHandle Handle for this image.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_OUT_OF_RESOURCES There was not enough memory to install the
+ protocols.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+
+**/
+STATIC
+EFI_STATUS
+PlatformHasAcpiDt (
+ IN EFI_HANDLE ImageHandle
+ )
+{
+ if (!PcdGetBool (PcdForceNoAcpi)) {
+ // Expose ACPI tables
+ return gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gEdkiiPlatformHasAcpiGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ }
+
+ // Expose the Device Tree.
+ return gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gEdkiiPlatformHasDeviceTreeGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+}
+
+/** Entry point for Kvmtool Platform Dxe
+
+ @param [in] ImageHandle Handle for this image.
+ @param [in] SystemTable Pointer to the EFI system table.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_OUT_OF_RESOURCES There was not enough memory to install the
+ protocols.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+KvmtoolPlatformDxeEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = PlatformHasAcpiDt (ImageHandle);
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
new file mode 100644
index 0000000000000000000000000000000000000000..08a0fe5ce14469133479046385bdd48c22698639
--- /dev/null
+++ b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
@@ -0,0 +1,47 @@
+#/** @file
+#
+# The KvmtoolPlatformDxe performs the platform specific initialization like:
+# - It decides if the firmware should expose ACPI or Device Tree-based
+# hardware description to the operating system.
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = KvmtoolPlatformDxe
+ FILE_GUID = 7479CCCD-D721-442A-8C73-A72DBB886669
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = KvmtoolPlatformDxeEntryPoint
+
+[Sources]
+ KvmtoolPlatformDxe.c
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ DxeServicesTableLib
+ MemoryAllocationLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+
+[Guids]
+ gEdkiiPlatformHasAcpiGuid ## SOMETIMES_PRODUCES ## PROTOCOL
+ gEdkiiPlatformHasDeviceTreeGuid ## SOMETIMES_PRODUCES ## PROTOCOL
+
+[Pcd]
+ gArmVirtTokenSpaceGuid.PcdForceNoAcpi
+
+[Depex]
+ TRUE
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 05/15] ArmVirtPkg: kvmtool platform memory map
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (3 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
` (9 subsequent siblings)
14 siblings, 0 replies; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Kvmtool is a virtual machine manager that enables
hosting KVM guests. Kvmtool allows to vary the
hardware configuration of the virtual platform
it provides to the guest partition. It provides
the current hardware configuration to the firmware
by handing off a device tree containing the hardware
information.
This library parses the kvmtool provided device
tree and populates the system memory map for the
kvmtool virtual platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- Fix coding style, use "Txt" in LOG_VM_MAP(txt). [Laszlo]
- Fixed coding style and also formatted log output. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200913#59548
v2:
- Library to populate Kvmtool system memory map. [Sami]
ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c | 128 ++++++++++++++++++++
ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf | 42 +++++++
2 files changed, 170 insertions(+)
diff --git a/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..981c2b4aa29da2a797206c5770adf30a761ff55c
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.c
@@ -0,0 +1,128 @@
+/** @file
+
+ Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/ArmLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/MemoryAllocationLib.h>
+
+// Number of Virtual Memory Map Descriptors
+#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 5
+
+#define MAX_REGION_NAME_LEN 32
+
+#define LOG_MEM_MAP_HEADER() \
+ DEBUG (( \
+ DEBUG_ERROR, \
+ "%-*a : %-18a : %-18a - %-18a : %-a\n", \
+ MAX_REGION_NAME_LEN, \
+ "Region", \
+ "Physical Address", \
+ "Virtual Address", \
+ "Size", \
+ "Attribute" \
+ ));
+
+#define LOG_MEM_MAP(Txt) \
+ DEBUG (( \
+ DEBUG_ERROR, \
+ "%-*a : 0x%016x : 0x%016x - 0x%016x : 0x%02x\n", \
+ MAX_REGION_NAME_LEN, \
+ Txt, \
+ VirtualMemoryTable[Idx].PhysicalBase, \
+ VirtualMemoryTable[Idx].VirtualBase, \
+ VirtualMemoryTable[Idx].Length, \
+ VirtualMemoryTable[Idx].Attributes \
+ ));
+
+/**
+ Return the Virtual Memory Map of your platform
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU
+ on your platform.
+
+ @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR
+ describing a Physical-to-Virtual Memory
+ mapping. This array must be ended by a
+ zero-filled entry. The allocated memory
+ will not be freed.
+
+**/
+VOID
+ArmVirtGetMemoryMap (
+ OUT ARM_MEMORY_REGION_DESCRIPTOR **VirtualMemoryMap
+ )
+{
+ ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
+ UINTN Idx = 0;
+ EFI_PHYSICAL_ADDRESS TopOfAddressSpace;
+
+ ASSERT (VirtualMemoryMap != NULL);
+
+ TopOfAddressSpace = LShiftU64 (1ULL, ArmGetPhysicalAddressBits ());
+
+ VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)
+ AllocatePages (
+ EFI_SIZE_TO_PAGES (
+ sizeof (ARM_MEMORY_REGION_DESCRIPTOR) *
+ MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS
+ )
+ );
+ if (VirtualMemoryTable == NULL) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: Error: Failed to Allocate Pages\n",
+ __FUNCTION__
+ ));
+ return;
+ }
+
+ LOG_MEM_MAP_HEADER ();
+
+ // System DRAM
+ VirtualMemoryTable[Idx].PhysicalBase = PcdGet64 (PcdSystemMemoryBase);
+ VirtualMemoryTable[Idx].VirtualBase = VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Length = PcdGet64 (PcdSystemMemorySize);
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
+ LOG_MEM_MAP ("System DRAM Memory Map");
+
+ // Peripheral space before DRAM
+ VirtualMemoryTable[++Idx].PhysicalBase = 0x0;
+ VirtualMemoryTable[Idx].VirtualBase = 0x0;
+ VirtualMemoryTable[Idx].Length = PcdGet64 (PcdSystemMemoryBase);
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+ LOG_MEM_MAP ("Peripheral space before DRAM");
+
+ // Peripheral space after DRAM
+ VirtualMemoryTable[++Idx].PhysicalBase = PcdGet64 (PcdSystemMemoryBase) +
+ PcdGet64 (PcdSystemMemorySize);
+ VirtualMemoryTable[Idx].VirtualBase = VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Length = TopOfAddressSpace -
+ VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+ LOG_MEM_MAP ("Peripheral space after DRAM");
+
+ // Map the FV region as normal executable memory
+ VirtualMemoryTable[++Idx].PhysicalBase = PcdGet64 (PcdFvBaseAddress);
+ VirtualMemoryTable[Idx].VirtualBase = VirtualMemoryTable[Idx].PhysicalBase;
+ VirtualMemoryTable[Idx].Length = FixedPcdGet32 (PcdFvSize);
+ VirtualMemoryTable[Idx].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK;
+ LOG_MEM_MAP ("FV region");
+
+ // End of Table
+ VirtualMemoryTable[++Idx].PhysicalBase = 0;
+ VirtualMemoryTable[Idx].VirtualBase = 0;
+ VirtualMemoryTable[Idx].Length = 0;
+ VirtualMemoryTable[Idx].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0;
+
+ ASSERT((Idx + 1) <= MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS);
+
+ *VirtualMemoryMap = VirtualMemoryTable;
+}
diff --git a/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..dbf4ceabe3ae0db5e743e1d9a575542dca32ed0a
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
@@ -0,0 +1,42 @@
+#/* @file
+#
+# Copyright (c) 2018, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#*/
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = KvmtoolVirtMemInfoLib
+ FILE_GUID = B752E953-394F-462C-811C-F8BE35C8C071
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ArmVirtMemInfoLib
+
+[Sources]
+ KvmtoolVirtMemInfoLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ ArmLib
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ MemoryAllocationLib
+ PcdLib
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFvSize
+
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (4 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 05/15] ArmVirtPkg: kvmtool platform memory map Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 8:45 ` Philippe Mathieu-Daudé
2020-06-25 11:38 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation Sami Mujawar
` (8 subsequent siblings)
14 siblings, 2 replies; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, philmd, lersek,
Alexandru.Elisei, Andre.Przywara, Matteo.Carlini, Laura.Moretta,
nd
Kvmtool places the base address of the CFI flash in
the device tree it passes to UEFI. This library
parses the kvmtool device tree to read the CFI base
address and initialise the PCDs use by the NOR flash
driver and the variable storage.
UEFI takes ownership of the CFI flash hardware, and
exposes its functionality through the UEFI Runtime
Variable Service. Therefore, disable the device tree
node for the CFI flash used for storing the UEFI
variables, to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- ASSERT is sufficient to test Locating [Ard]
gFdtClientProtocolGuid as DEPEX ensures that this is
guaranteed to succeed.
- Removed additional error handling based on review [Sami]
feedback.
- Fix confusion caused by use of macro MAX_FLASH_BANKS. [Philippe]
- Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES. [Sami]
- Use macro to define block size for flash. [Philippe]
- Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured [Sami]
to reflect the correct block size 64KB.
- Disable the DT flash node used for UEFI variable storage [Sami]
as UEFI takes ownership of the flash device.
Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
v2:
- Library to read CFI flash base address from DT and initialise [Sami]
PCDs used for NOR flash variables.
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330 ++++++++++++++++++++
ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
2 files changed, 379 insertions(+)
diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
new file mode 100644
index 0000000000000000000000000000000000000000..8e9dcf31691b4b12b9c7bac1ad4ba8d3a534a1d8
--- /dev/null
+++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
@@ -0,0 +1,330 @@
+/** @file
+ An instance of the NorFlashPlatformLib for Kvmtool platform.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ **/
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/NorFlashPlatformLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/FdtClient.h>
+
+/** Macro defining the NOR block size configured in Kvmtool.
+*/
+#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
+
+/** Macro defining the maximum number of Flash devices.
+*/
+#define MAX_FLASH_DEVICES 4
+
+/** Macro defining the cfi-flash label describing the UEFI variable store.
+*/
+#define LABEL_UEFI_VAR_STORE "System-firmware"
+
+STATIC NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
+STATIC UINTN mNorFlashDeviceCount = 0;
+STATIC INT32 mUefiVarStoreNode = MAX_INT32;
+STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
+
+/** This function performs platform specific actions to initialise
+ the NOR flash, if required.
+
+ @retval EFI_SUCCESS Success.
+**/
+EFI_STATUS
+NorFlashPlatformInitialization (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ DEBUG ((DEBUG_INFO, "NorFlashPlatformInitialization\n"));
+
+ if ((mNorFlashDeviceCount > 0) && (mUefiVarStoreNode != MAX_INT32)) {
+ //
+ // UEFI takes ownership of the cfi-flash hardware, and exposes its
+ // functionality through the UEFI Runtime Variable Service. This means we
+ // need to disable it in the device tree to prevent the OS from attaching
+ // its device driver as well.
+ // Note: This library is loaded by the FaultTolerantWriteDxe to setup the
+ // Ftw PCDs and later by the NorFlashDxe to provide the NorFlashPlatformLib
+ // interfaces. Therefore the FDT node used for UEFI storage variable is
+ // disabled here.
+ //
+ Status = mFdtClient->SetNodeProperty (
+ mFdtClient,
+ mUefiVarStoreNode,
+ "status",
+ "disabled",
+ sizeof ("disabled")
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_WARN, "Failed to set cfi-flash status to 'disabled'\n"));
+ }
+ } else {
+ Status = EFI_NOT_FOUND;
+ DEBUG ((DEBUG_ERROR, "Flash device for UEFI variable storage not found\n"));
+ }
+
+ return Status;
+}
+
+/** Initialise Non volatile Flash storage variables.
+
+ @param [in] FlashDevice Pointer to the NOR Flash device.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_OUT_OF_RESOURCES Insufficient flash storage space.
+**/
+EFI_STATUS
+SetupVariableStore (
+ IN NOR_FLASH_DESCRIPTION * FlashDevice
+ )
+{
+ UINTN FlashRegion;
+ UINTN FlashNvStorageVariableBase;
+ UINTN FlashNvStorageFtwWorkingBase;
+ UINTN FlashNvStorageFtwSpareBase;
+ UINTN FlashNvStorageVariableSize;
+ UINTN FlashNvStorageFtwWorkingSize;
+ UINTN FlashNvStorageFtwSpareSize;
+
+ FlashNvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
+ FlashNvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+ FlashNvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+
+ if ((FlashNvStorageVariableSize == 0) ||
+ (FlashNvStorageFtwWorkingSize == 0) ||
+ (FlashNvStorageFtwSpareSize == 0)) {
+ DEBUG ((DEBUG_ERROR, "FlashNvStorage size not defined\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Setup the variable store
+ FlashRegion = FlashDevice->DeviceBaseAddress;
+
+ FlashNvStorageVariableBase = FlashRegion;
+ FlashRegion += PcdGet32 (PcdFlashNvStorageVariableSize);
+
+ FlashNvStorageFtwWorkingBase = FlashRegion;
+ FlashRegion += PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+
+ FlashNvStorageFtwSpareBase = FlashRegion;
+ FlashRegion += PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+
+ if (FlashRegion > (FlashDevice->DeviceBaseAddress + FlashDevice->Size)) {
+ DEBUG ((DEBUG_ERROR, "Insufficient flash storage size\n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PcdSet32S (
+ PcdFlashNvStorageVariableBase,
+ FlashNvStorageVariableBase
+ );
+
+ PcdSet32S (
+ PcdFlashNvStorageFtwWorkingBase,
+ FlashNvStorageFtwWorkingBase
+ );
+
+ PcdSet32S (
+ PcdFlashNvStorageFtwSpareBase,
+ FlashNvStorageFtwSpareBase
+ );
+
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageVariableBase = 0x%x\n",
+ FlashNvStorageVariableBase
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageVariableSize = 0x%x\n",
+ FlashNvStorageVariableSize
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwWorkingBase = 0x%x\n",
+ FlashNvStorageFtwWorkingBase
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwWorkingSize = 0x%x\n",
+ FlashNvStorageFtwWorkingSize
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwSpareBase = 0x%x\n",
+ FlashNvStorageFtwSpareBase
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ "PcdFlashNvStorageFtwSpareSize = 0x%x\n",
+ FlashNvStorageFtwSpareSize
+ ));
+
+ return EFI_SUCCESS;
+}
+
+/** Return the Flash devices on the platform.
+
+ @param [out] NorFlashDescriptions Pointer to the Flash device description.
+ @param [out] Count Number of Flash devices.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+NorFlashPlatformGetDevices (
+ OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
+ OUT UINT32 *Count
+ )
+{
+ if (mNorFlashDeviceCount > 0) {
+ *NorFlashDescriptions = mNorFlashDevices;
+ *Count = mNorFlashDeviceCount;
+ return EFI_SUCCESS;
+ }
+ return EFI_NOT_FOUND;
+}
+
+/** Entrypoint for NorFlashPlatformLib.
+
+ @param [in] ImageHandle The handle to the image.
+ @param [in] SystemTable Pointer to the System Table.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND Flash device not found.
+**/
+EFI_STATUS
+EFIAPI
+NorFlashPlatformLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE * SystemTable
+ )
+{
+ INT32 Node;
+ EFI_STATUS Status;
+ EFI_STATUS FindNodeStatus;
+ CONST UINT32 *Reg;
+ UINT32 PropSize;
+ UINT64 Base;
+ UINT64 Size;
+ UINTN UefiVarStoreIndex;
+ CONST CHAR8 *Label;
+ UINT32 LabelLen;
+
+ if (mNorFlashDeviceCount != 0) {
+ return EFI_SUCCESS;
+ }
+
+ Status = gBS->LocateProtocol (
+ &gFdtClientProtocolGuid,
+ NULL,
+ (VOID **)&mFdtClient
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ UefiVarStoreIndex = MAX_UINTN;
+ for (FindNodeStatus = mFdtClient->FindCompatibleNode (
+ mFdtClient,
+ "cfi-flash",
+ &Node
+ );
+ !EFI_ERROR (FindNodeStatus) &&
+ (mNorFlashDeviceCount < MAX_FLASH_DEVICES);
+ FindNodeStatus = mFdtClient->FindNextCompatibleNode (
+ mFdtClient,
+ "cfi-flash",
+ Node,
+ &Node
+ )) {
+ Status = mFdtClient->GetNodeProperty (
+ mFdtClient,
+ Node,
+ "label",
+ (CONST VOID **)&Label,
+ &LabelLen
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "%a: GetNodeProperty ('label') failed (Status == %r)\n",
+ __FUNCTION__,
+ Status
+ ));
+ } else if (AsciiStrCmp (Label, LABEL_UEFI_VAR_STORE) == 0) {
+ UefiVarStoreIndex = mNorFlashDeviceCount;
+ mUefiVarStoreNode = Node;
+ }
+
+ Status = mFdtClient->GetNodeProperty (
+ mFdtClient,
+ Node,
+ "reg",
+ (CONST VOID **)&Reg,
+ &PropSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n",
+ __FUNCTION__, Status));
+ continue;
+ }
+
+ ASSERT ((PropSize % (4 * sizeof (UINT32))) == 0);
+
+ while ((PropSize >= (4 * sizeof (UINT32))) &&
+ (mNorFlashDeviceCount < MAX_FLASH_DEVICES)) {
+ Base = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
+ Size = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
+ Reg += 4;
+
+ PropSize -= 4 * sizeof (UINT32);
+
+ //
+ // Disregard any flash devices that overlap with the primary FV.
+ // The firmware is not updatable from inside the guest anyway.
+ //
+ if ((PcdGet64 (PcdFvBaseAddress) + PcdGet32 (PcdFvSize) > Base) &&
+ (Base + Size) > PcdGet64 (PcdFvBaseAddress)) {
+ continue;
+ }
+
+ DEBUG ((
+ DEBUG_INFO,
+ "NOR%d : Base = 0x%lx, Size = 0x%lx\n",
+ mNorFlashDeviceCount,
+ Base,
+ Size
+ ));
+
+ mNorFlashDevices[mNorFlashDeviceCount].DeviceBaseAddress = (UINTN)Base;
+ mNorFlashDevices[mNorFlashDeviceCount].RegionBaseAddress = (UINTN)Base;
+ mNorFlashDevices[mNorFlashDeviceCount].Size = (UINTN)Size;
+ mNorFlashDevices[mNorFlashDeviceCount].BlockSize = KVMTOOL_NOR_BLOCK_SIZE;
+ mNorFlashDeviceCount++;
+ }
+ } // for
+
+ // Setup the variable store in the last device
+ if (mNorFlashDeviceCount > 0) {
+ if (UefiVarStoreIndex == MAX_UINTN) {
+ // We did not find a label matching the UEFI Variable store. Default to
+ // using the last cfi-flash device as the variable store.
+ UefiVarStoreIndex = mNorFlashDeviceCount - 1;
+ mUefiVarStoreNode = Node;
+ }
+ if (mNorFlashDevices[UefiVarStoreIndex].DeviceBaseAddress != 0) {
+ return SetupVariableStore (&mNorFlashDevices[UefiVarStoreIndex]);
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..a3230e4b2be668904322103825b93e867503984e
--- /dev/null
+++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
@@ -0,0 +1,49 @@
+#/** @file
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = NorFlashKvmtoolLib
+ FILE_GUID = E75F07A1-B160-4893-BDD4-09E32FF847DC
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = NorFlashPlatformLib
+ CONSTRUCTOR = NorFlashPlatformLibConstructor
+
+[Sources.common]
+ NorFlashKvmtool.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ PcdLib
+ UefiBootServicesTableLib
+
+[Protocols]
+ gFdtClientProtocolGuid ## CONSUMES
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmTokenSpaceGuid.PcdFvSize
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+
+[Depex]
+ gFdtClientProtocolGuid
+
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (5 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 11:42 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
` (7 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Initialise serial port early so that the platform
memory map can be logged.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
ArmVirtPkg/PrePi/PrePi.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/ArmVirtPkg/PrePi/PrePi.c b/ArmVirtPkg/PrePi/PrePi.c
index 4f0c3f98bad63d0682cccd76a0a062d1fd4f46ab..5e144f4bdefb810708238097a3373f11d150bfe5 100755
--- a/ArmVirtPkg/PrePi/PrePi.c
+++ b/ArmVirtPkg/PrePi/PrePi.c
@@ -1,6 +1,6 @@
/** @file
*
-* Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2020, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
@@ -60,16 +60,16 @@ PrePiMain (
//
InvalidateDataCacheRange((VOID *)(UINTN)PcdGet64 (PcdFdBaseAddress), PcdGet32 (PcdFdSize));
- // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
- Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
- ASSERT_EFI_ERROR (Status);
-
// Initialize the Serial Port
SerialPortInitialize ();
CharCount = AsciiSPrint (Buffer,sizeof (Buffer),"UEFI firmware (version %s built at %a on %a)\n\r",
(CHAR16*)PcdGetPtr(PcdFirmwareVersionString), __TIME__, __DATE__);
SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
+ Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
+ ASSERT_EFI_ERROR (Status);
+
// Create the Stacks HOB (reserve the memory for all stacks)
StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize);
BuildStackHob (StacksBase, StacksSize);
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (6 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 13:51 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
` (6 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, jian.j.wang, hao.a.wu,
Alexandru.Elisei, Andre.Przywara, Matteo.Carlini, Laura.Moretta,
nd
The BaseSerialPortLib16550 library does not implement
a constructor. This prevents the correct constructor
invocation order for dependent libraries.
e.g. A PlatformHookLib (for the Serial Port) may have
a dependency on retrieving data from a Hob. A Hob
library implementation may configure its initial state
in the HobLib constructor. Since BaseSerialPortLib16550
does not implement a constructor, the Basetools do not
resolve the correct order for constructor invocation.
To fix this, add an empty constructor to the serial port
library BaseSerialPortLib16550.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c | 17 +++++++++++++++++
MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | 3 +++
2 files changed, 20 insertions(+)
diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
index 9cb50dd80d5634ab2aa6d68bf5ca7fb891463eef..0fd1382ee83c9de09d8250830bd9569056fcee2f 100644
--- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
+++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
@@ -4,6 +4,7 @@
(C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2018, AMD Incorporated. All rights reserved.<BR>
+ Copyright (c) 2020, ARM Limited. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -1102,3 +1103,19 @@ SerialPortSetAttributes (
return RETURN_SUCCESS;
}
+/** Base Serial Port 16550 Library Constructor
+
+ @retval RETURN_SUCCESS Success.
+*/
+EFI_STATUS
+EFIAPI
+BaseSerialPortLib16550 (
+ VOID
+ )
+{
+ // Nothing to do here. This constructor is added to
+ // enable the chain of constructor invocation for
+ // dependent libraries.
+ return RETURN_SUCCESS;
+}
+
diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
index 8b4ae3f1d4ee1e2e9a8b81eab4c900541ce8cfb6..92b7a8b7896a305d2ce22589f8a9593618d37bb7 100644
--- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
@@ -2,6 +2,8 @@
# SerialPortLib instance for 16550 UART.
#
# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
@@ -14,6 +16,7 @@ [Defines]
MODULE_TYPE = BASE
VERSION_STRING = 1.1
LIBRARY_CLASS = SerialPortLib
+ CONSTRUCTOR = BaseSerialPortLib16550
[Packages]
MdePkg/MdePkg.dec
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (7 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 13:52 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
` (5 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Introduce a new GUID Hob gEarly16550UartBaseAddressGuid
to cache the base address of the 16550 UART, for when
PCD access is not available.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
ArmVirtPkg/ArmVirtPkg.dec | 2 ++
ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h | 22 ++++++++++++++++++++
2 files changed, 24 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
index 08ddd68a863eb82778fa7a92b20ac1bff271f5e5..bf82f7f1f3f2a0ce545d87fa93350f56de78328b 100644
--- a/ArmVirtPkg/ArmVirtPkg.dec
+++ b/ArmVirtPkg/ArmVirtPkg.dec
@@ -1,6 +1,7 @@
#/** @file
#
# Copyright (c) 2014, Linaro Limited. All rights reserved.
+# Copyright (c) 2020, ARM Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
@@ -30,6 +31,7 @@ [LibraryClasses]
[Guids.common]
gArmVirtTokenSpaceGuid = { 0x0B6F5CA7, 0x4F53, 0x445A, { 0xB7, 0x6E, 0x2E, 0x36, 0x5B, 0x80, 0x63, 0x66 } }
gEarlyPL011BaseAddressGuid = { 0xB199DEA9, 0xFD5C, 0x4A84, { 0x80, 0x82, 0x2F, 0x41, 0x70, 0x78, 0x03, 0x05 } }
+ gEarly16550UartBaseAddressGuid = { 0xea67ca3e, 0x1f54, 0x436b, { 0x97, 0x88, 0xd4, 0xeb, 0x29, 0xc3, 0x42, 0x67 } }
gArmVirtVariableGuid = { 0x50bea1e5, 0xa2c5, 0x46e9, { 0x9b, 0x3a, 0x59, 0x59, 0x65, 0x16, 0xb0, 0x0a } }
diff --git a/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h b/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
new file mode 100644
index 0000000000000000000000000000000000000000..6b76f37a27dac03d6749f31a03e8026023231056
--- /dev/null
+++ b/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
@@ -0,0 +1,22 @@
+/** @file
+ GUID for the HOB that caches the base address of the 16550 serial port, for
+ when PCD access is not available.
+
+ Copyright (c) 2020, ARM Limited. All rights reserved.
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef EARLY_16550_UART_BASE_ADDRESS_H__
+#define EARLY_16550_UART_BASE_ADDRESS_H__
+
+#define EARLY_16550_UART_BASE_ADDRESS_GUID { \
+ 0xea67ca3e, 0x1f54, 0x436b, { \
+ 0x97, 0x88, 0xd4, 0xeb, 0x29, 0xc3, 0x42, 0x67 \
+ } \
+ }
+
+extern EFI_GUID gEarly16550UartBaseAddressGuid;
+
+#endif // EARLY_16550_UART_BASE_ADDRESS_H__
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (8 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 13:56 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
` (4 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
The BaseSerialPort16550 library invokes the
PlatformHookSerialPortInitialize() implemented as
part of the PlatformHook library, to perform platform
specific initialization required to enable use of the
16550 device. The BaseSerialPort16550 library uses
the PcdSerialRegisterBase to obtain the base address
of the UART for MMIO operations.
Some VMMs like Kvmtool provide the base address of
the console serial port in the platform device tree.
This patch introduces two instances of the Platform
Hook library:
1. EarlyFdt16550SerialPortHookLib - parses the
platform device tree to extract the base
address of the 16550 UART and update the PCD
PcdSerialRegisterBase.
2. Fdt16550SerialPortHookLib - reads the GUID
Hob gEarly16550UartBaseAddressGuid (that caches
the base address of the 16550 UART discovered
during early stages) and updates the PCD
PcdSerialRegisterBase.
Note:
a. The PCD PcdSerialRegisterBase is configured
as PatchableInModule.
b. A separate patch introduces a PlatformPeiLib
that trampolines the 16550 UART base address
from the Pcd PcdSerialRegisterBase to the
GUID Hob gEarly16550UartBaseAddressGuid.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c | 138 ++++++++++++++++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf | 36 +++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c | 57 ++++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf | 39 ++++++
ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni | 14 ++
5 files changed, 284 insertions(+)
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..4e97302d01dc5692e046fb901663373828b532ee
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
@@ -0,0 +1,138 @@
+/** @file
+ Early Platform Hook Library instance for 16550 Uart.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PlatformHookLib.h>
+#include <libfdt.h>
+
+/** Get the UART base address of the console serial-port from the DT.
+
+ This function fetches the node referenced in the "stdout-path"
+ property of the "chosen" node and returns the base address of
+ the console UART.
+
+ @param [in] Fdt Pointer to a Flattened Device Tree (Fdt).
+ @param [out] SerialConsoleAddress If success, contains the base address
+ of the console serial-port.
+
+ @retval EFI_SUCCESS The function completed successfully.
+ @retval EFI_NOT_FOUND Console serial-port info not found in DT.
+ @retval EFI_INVALID_PARAMETER Invalid parameter.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+GetSerialConsolePortAddress (
+ IN CONST VOID *Fdt,
+ OUT UINT64 *SerialConsoleAddress
+ )
+{
+ CONST CHAR8 *Prop;
+ INT32 PropSize;
+ CONST CHAR8 *Path;
+ INT32 PathLen;
+ INT32 ChosenNode;
+ INT32 SerialConsoleNode;
+ INT32 Len;
+ CONST CHAR8 *NodeStatus;
+ CONST UINT64 *RegProperty;
+
+ if ((Fdt == NULL) || (fdt_check_header (Fdt) != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // The "chosen" node resides at the the root of the DT. Fetch it.
+ ChosenNode = fdt_path_offset (Fdt, "/chosen");
+ if (ChosenNode < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ Prop = fdt_getprop (Fdt, ChosenNode, "stdout-path", &PropSize);
+ if (PropSize < 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ // Determine the actual path length, as a colon terminates the path.
+ Path = ScanMem8 (Prop, ':', PropSize);
+ if (Path == NULL) {
+ PathLen = AsciiStrLen (Prop);
+ } else {
+ PathLen = Path - Prop;
+ }
+
+ // Aliases cannot start with a '/', so it must be the actual path.
+ if (Prop[0] == '/') {
+ SerialConsoleNode = fdt_path_offset_namelen (Fdt, Prop, PathLen);
+ } else {
+ // Lookup the alias, as this contains the actual path.
+ Path = fdt_get_alias_namelen (Fdt, Prop, PathLen);
+ if (Path == NULL) {
+ return EFI_NOT_FOUND;
+ }
+ SerialConsoleNode = fdt_path_offset (Fdt, Path);
+ }
+
+ NodeStatus = fdt_getprop (Fdt, SerialConsoleNode, "status", &Len);
+ if ((NodeStatus != NULL) && (AsciiStrCmp (NodeStatus, "okay") != 0)) {
+ return EFI_NOT_FOUND;
+ }
+
+ RegProperty = fdt_getprop (Fdt, SerialConsoleNode, "reg", &Len);
+ if (Len != 16) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *SerialConsoleAddress = fdt64_to_cpu (ReadUnaligned64 (RegProperty));
+
+ return EFI_SUCCESS;
+}
+
+/** Platform hook to retrieve the 16550 UART base address from the platform
+ Device tree and store it in PcdSerialRegisterBase.
+
+ @retval RETURN_SUCCESS Success.
+ @retval RETURN_INVALID_PARAMETER A parameter was invalid.
+ @retval RETURN_NOT_FOUND Serial port information not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+PlatformHookSerialPortInitialize (
+ VOID
+ )
+{
+ RETURN_STATUS Status;
+ VOID *DeviceTreeBase;
+ UINT64 SerialConsoleAddress;
+
+ if (PcdGet64 (PcdSerialRegisterBase) != 0) {
+ return RETURN_SUCCESS;
+ }
+
+ DeviceTreeBase = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ if (DeviceTreeBase == NULL) {
+ return RETURN_NOT_FOUND;
+ }
+
+ Status = GetSerialConsolePortAddress (DeviceTreeBase, &SerialConsoleAddress);
+ if (RETURN_ERROR (Status)) {
+ return Status;
+ }
+
+ return (EFI_STATUS)PcdSet64S (PcdSerialRegisterBase, SerialConsoleAddress);
+}
+
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..007a45eca2a622118044b527a5bc6403b706608a
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
@@ -0,0 +1,36 @@
+## @file
+# Early Platform Hook Library instance for 16550 Uart.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = EarlyFdt16550SerialPortHookLib
+ MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
+ FILE_GUID = FFB19961-79CC-4684-84A8-C31B0A2BBE82
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformHookLib|SEC PEI_CORE PEIM
+
+[Sources]
+ EarlyFdt16550SerialPortHookLib.c
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ FdtLib
+ HobLib
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[Pcd]
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..1100c12aef361e39cf78f0c3e4e14cc2feecfcee
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
@@ -0,0 +1,57 @@
+/** @file
+ Platform Hook Library instance for 16550 Uart.
+
+ Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+
+#include <Pi/PiBootMode.h>
+#include <Pi/PiHob.h>
+
+#include <Guid/Early16550UartBaseAddress.h>
+#include <Guid/Fdt.h>
+#include <Guid/FdtHob.h>
+
+#include <Library/BaseLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PlatformHookLib.h>
+
+/** Platform hook to retrieve the 16550 UART base address from the GUID Hob
+ that caches the UART base address from early boot stage and store it in
+ PcdSerialRegisterBase.
+
+ @retval RETURN_SUCCESS Success.
+ @retval RETURN_NOT_FOUND Serial Port information not found.
+
+**/
+RETURN_STATUS
+EFIAPI
+PlatformHookSerialPortInitialize (
+ VOID
+ )
+{
+ VOID *Hob;
+ UINT64 *UartBase;
+
+ if (PcdGet64 (PcdSerialRegisterBase) != 0) {
+ return RETURN_SUCCESS;
+ }
+
+ Hob = GetFirstGuidHob (&gEarly16550UartBaseAddressGuid);
+ if ((Hob == NULL) || (GET_GUID_HOB_DATA_SIZE (Hob) != sizeof (*UartBase))) {
+ return RETURN_NOT_FOUND;
+ }
+
+ UartBase = GET_GUID_HOB_DATA (Hob);
+ if ((UINTN)*UartBase == 0) {
+ return RETURN_NOT_FOUND;
+ }
+
+ return (RETURN_STATUS)PcdSet64S (PcdSerialRegisterBase, (UINTN)*UartBase);
+}
+
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..ba789ca69041b647a4a881b03110ff853df89f65
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
@@ -0,0 +1,39 @@
+## @file
+# Platform Hook Library instance for 16550 Uart.
+#
+# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = Fdt16550SerialPortHookLib
+ MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
+ FILE_GUID = C6DFD3F0-179D-4376-89A5-F641A2E7EFB5
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformHookLib|DXE_CORE DXE_DRIVER UEFI_DRIVER DXE_RUNTIME_DRIVER UEFI_APPLICATION
+ CONSTRUCTOR = PlatformHookSerialPortInitialize
+
+[Sources]
+ Fdt16550SerialPortHookLib.c
+
+[LibraryClasses]
+ BaseLib
+ PcdLib
+ HobLib
+
+[Packages]
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
+
+[Guids]
+ gEarly16550UartBaseAddressGuid
+
diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
new file mode 100644
index 0000000000000000000000000000000000000000..19a61a4a03244321bda7c88cd26128b44bfd46b4
--- /dev/null
+++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
@@ -0,0 +1,14 @@
+// /** @file
+// Platform Hook Library instance for 16550 Uart.
+//
+//
+// Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+#string STR_MODULE_ABSTRACT #language en-US "Platform Hook Library instance for 16550 Uart."
+
+#string STR_MODULE_DESCRIPTION #language en-US "Platform Hook Library instance for 16550 Uart."
+
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (9 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 14:05 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform Sami Mujawar
` (3 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
The PlatformPeim() in the PlatformPeiLib is invoked
by the PrePiMain() and provides the platform an
opportunity to setup the plaform specific HOBs.
This PlatfromPeiLib initialises the Kvmtool platform
HOBs like the Fdt, 16550BaseAddress, etc.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c | 78 ++++++++++++++++++++
ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf | 48 ++++++++++++
2 files changed, 126 insertions(+)
diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
new file mode 100644
index 0000000000000000000000000000000000000000..a97b31537fbc8071eed030f912ade60de3945356
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
@@ -0,0 +1,78 @@
+/** @file
+*
+* Copyright (c) 2020, ARM Limited. All rights reserved.
+*
+* SPDX-License-Identifier: BSD-2-Clause-Patent
+*
+**/
+
+#include <PiPei.h>
+
+#include <Guid/Early16550UartBaseAddress.h>
+#include <Guid/FdtHob.h>
+
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PeiServicesLib.h>
+#include <libfdt.h>
+
+/** Initialise Platform HOBs
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_OUT_OF_RESOURCES Out of resources.
+**/
+EFI_STATUS
+EFIAPI
+PlatformPeim (
+ VOID
+ )
+{
+ VOID *Base;
+ VOID *NewBase;
+ UINTN FdtSize;
+ UINTN FdtPages;
+ UINT64 *FdtHobData;
+ UINT64 *UartHobData;
+
+ Base = (VOID*)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ if ((Base == NULL) || (fdt_check_header (Base) != 0)) {
+ ASSERT (0);
+ return EFI_INVALID_PARAMETER;
+ }
+
+ FdtSize = fdt_totalsize (Base) + PcdGet32 (PcdDeviceTreeAllocationPadding);
+ FdtPages = EFI_SIZE_TO_PAGES (FdtSize);
+ NewBase = AllocatePages (FdtPages);
+ if (NewBase == NULL) {
+ ASSERT (0);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ fdt_open_into (Base, NewBase, EFI_PAGES_TO_SIZE (FdtPages));
+
+ FdtHobData = BuildGuidHob (&gFdtHobGuid, sizeof (*FdtHobData));
+ if (FdtHobData == NULL) {
+ ASSERT (0);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ *FdtHobData = (UINTN)NewBase;
+
+ UartHobData = BuildGuidHob (
+ &gEarly16550UartBaseAddressGuid,
+ sizeof (*UartHobData)
+ );
+ if (UartHobData == NULL) {
+ ASSERT (0);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ *UartHobData = PcdGet64 (PcdSerialRegisterBase);
+
+ BuildFvHob (PcdGet64 (PcdFvBaseAddress), PcdGet32 (PcdFvSize));
+
+ return EFI_SUCCESS;
+}
diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
new file mode 100644
index 0000000000000000000000000000000000000000..9f44b8885d3c131de1d41ac6947bd9218cfdf3e7
--- /dev/null
+++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
@@ -0,0 +1,48 @@
+#/** @file
+#
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x0001001B
+ BASE_NAME = PlatformPeiLib
+ FILE_GUID = 21073FB3-BA6F-43EB-83F0-4A840C648165
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = KvmtoolPlatformPeiLib
+
+[Sources]
+ KvmtoolPlatformPeiLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ HobLib
+ FdtLib
+ PcdLib
+ PeiServicesLib
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFvSize
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
+
+[Guids]
+ gFdtHobGuid
+ gEarly16550UartBaseAddressGuid
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (10 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 14:08 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
` (2 subsequent siblings)
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
Kvmtool is a virtual machine manager that enables hosting
KVM guests. Kvmtool emulates certain devices like serial
port, RTC, etc. essentially providing a virtual platform.
This patch adds support for kvmtool virtual platform.
Following is a brief description of the firmware
implementation choices:
- Serial Port: 16550 UART
On some platforms the 16550 UART is interfaced using
PCI. Therefore, the 16550 Serial port library is
dependent on the PCI library. The 16550 UART driver
checks the Device ID represented using the PCD
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
to determine if the UART is behind PCI.
If the Device ID is 0xFF then the serial 16550 UART
is not behind PCI.
On Kvmtool the Serial 16550 UART is not behind PCI,
and therefore a combination of BasePciLibPciExpress
and BasePciExpressLib is used to satisfy the PCI
library dependency.
The PcdSerialPciDeviceInfo is also set to 0xFF to
indicate that the Serial 16550 UART is not behind
PCI. The PCD PcdSerialUseMmio is also set to TRUE
to indicate MMIO accesses are required for the
UART registers.
Additionally two instances of PlatformHookLibs are
provided EarlyFdt16550SerialPortHookLib and
Fdt16550SerialPortHookLib to patch the
PcdSerialRegisterBase so that BaseSerialPortLib16550
and retrieve the base address of the 16550 UART.
- Dependency order for Flash
FaultTolerantWriteDxe makes use of PCDs (e.g.
PcdFlashNvStorageFtwSpareBase64 etc.), which in
case of kvmtool will be evaluated based on the CFI
flash base address read from the DT. These variables
are populated in the NorFlashPlatformLib loaded by
ArmVeNorFlashDxe.
This results in a dependency issue with
FaultTolerantWriteDxe. To resolve this make the
NorFlashPlatformLib as a library dependency for
FaultTolerantWriteDxe.
- RTC Controller
A separate patch updates the MC146818 RTC controller
driver to support MMIO accesses.
A KvmtoolRtcFdtClientLib has been introduced to
extract the base addresses of the RTC controller
from the platform device tree and map the RTC
register space as Runtime Memory.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- Use correct terminology. kvmtool is *not* an emulator. [Ard]
- Updated patch series to reflect correct terminology. [Sami]
- Don't define bits and pieces you cannot make use of. [Ard]
- Updated workspace to remove unsupported features. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200917#59552
v2:
- Updates to reflect review comments and support [Sami]
for latest features emulated by kvmtool e.g. CFI.
v1:
- Add support for Kvmtool emulated platform [Sami]
- Add more justification for platform and [Laszlo]
document platform maintainer.
Ref: https://edk2.groups.io/g/devel/topic/30915279#30693
ArmVirtPkg/ArmVirtKvmTool.dsc | 345 ++++++++++++++++++++
ArmVirtPkg/ArmVirtKvmTool.fdf | 259 +++++++++++++++
2 files changed, 604 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
new file mode 100644
index 0000000000000000000000000000000000000000..76e158eaea4be089de65f0f908f8623840681e0e
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
@@ -0,0 +1,345 @@
+# @file
+# Workspace file for KVMTool virtual platform.
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = ArmVirtKvmTool
+ PLATFORM_GUID = 4CB2C61E-FA32-4130-8E37-54ABC71A1A43
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x0001001B
+!ifdef $(EDK2_OUT_DIR)
+ OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
+!else
+ OUTPUT_DIRECTORY = Build/ArmVirtKvmTool-$(ARCH)
+!endif
+ SUPPORTED_ARCHITECTURES = AARCH64|ARM
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = ArmVirtPkg/ArmVirtKvmTool.fdf
+
+ #
+ # Defines for default states. These can be changed on the command line.
+ # -D FLAG=VALUE
+ #
+ DEFINE ENABLE_NETWORK = FALSE
+
+!include ArmVirtPkg/ArmVirt.dsc.inc
+
+[LibraryClasses.common]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+
+ # Virtio Support
+ VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
+ VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
+
+ ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf
+ ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
+
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+ NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+
+ # BDS Libraries
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+ BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+ FrameBufferBltLib|MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
+
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+ PciPcdProducerLib|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
+ PciHostBridgeLib|ArmVirtPkg/Library/FdtPciHostBridgeLib/FdtPciHostBridgeLib.inf
+
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+
+ PlatformPeiLib|ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
+
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+[LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE, LibraryClasses.common.PEIM]
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+
+[BuildOptions]
+ *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
+ #
+ # We need to avoid jump tables in SEC modules, so that the PE/COFF
+ # self-relocation code itself is guaranteed to be position independent.
+ #
+ GCC:*_*_*_CC_FLAGS = -fno-jump-tables
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
+
+ # Use MMIO for accessing RTC controller registers.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|TRUE
+
+[PcdsFixedAtBuild.common]
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
+
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|1
+
+!if $(ARCH) == AARCH64
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+!endif
+
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
+
+ # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+
+ #
+ # TTY Terminal Type
+ # 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
+
+ #
+ # ARM Virtual Architectural Timer -- fetch frequency from KVM
+ #
+ gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
+
+ # Use MMIO for accessing Serial port registers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+
+ #
+ # The maximum physical I/O addressability of the processor, set with
+ # BuildCpuHob().
+ #
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
+
+[PcdsPatchableInModule.common]
+ #
+ # This will be overridden in the code
+ #
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
+
+ #
+ # The device tree base address is handed off by kvmtool.
+ # We are booting from RAM using the Linux kernel boot protocol,
+ # x0 will point to the DTB image in memory.
+ #
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
+
+ gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
+ gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0
+
+[PcdsDynamicDefault.common]
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
+
+ gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
+
+ #
+ # ARM General Interrupt Controller
+ #
+ gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
+ gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
+ gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
+
+ #
+ # Set video resolution for boot options and for text setup.
+ # PlatformDxe can set the former at runtime.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
+
+ ## Force DTB
+ gArmVirtTokenSpaceGuid.PcdForceNoAcpi|TRUE
+
+ # Setup Flash storage variables
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x40000
+
+ ## RTC Register address in MMIO space.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+ #
+ # PEI Phase modules
+ #
+ ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf {
+ <LibraryClasses>
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ }
+
+ #
+ # DXE
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ }
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+
+ #
+ # Architectural Protocols
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ }
+
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+ }
+
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+ MdeModulePkg/Universal/Metronome/Metronome.inf
+ PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
+ }
+
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
+ }
+
+ ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+
+ #
+ # Platform Driver
+ #
+ ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
+ ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
+ ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+ ArmVirtPkg/HighMemDxe/HighMemDxe.inf
+ OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ OvmfPkg/VirtioNetDxe/VirtioNet.inf
+ OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+ MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf {
+ <LibraryClasses>
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ MdeModulePkg/Logo/LogoDxe.inf
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
+
+!if $(ENABLE_NETWORK) == TRUE
+ #
+ # Networking stack
+ #
+ NetworkPkg/SnpDxe/SnpDxe.inf
+ NetworkPkg/DpcDxe/DpcDxe.inf
+ NetworkPkg/ArpDxe/ArpDxe.inf
+ NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
+ NetworkPkg/Ip4Dxe/Ip4Dxe.inf
+ NetworkPkg/MnpDxe/MnpDxe.inf
+ NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
+ NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
+ NetworkPkg/Udp4Dxe/Udp4Dxe.inf
+ NetworkPkg/TcpDxe/TcpDxe.inf
+ NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ NetworkPkg/IScsiDxe/IScsiDxe.inf
+!endif
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
diff --git a/ArmVirtPkg/ArmVirtKvmTool.fdf b/ArmVirtPkg/ArmVirtKvmTool.fdf
new file mode 100644
index 0000000000000000000000000000000000000000..9c70b315cc787bba6db747298a600d65759b4188
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtKvmTool.fdf
@@ -0,0 +1,259 @@
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.KVMTOOL_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
+# The size in bytes of the FLASH Device
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+#
+# Implement the Linux kernel header layout so that the loader will identify
+# it as something bootable, and execute it with a FDT pointer in x0 or r2.
+# This area will be reused to store a copy of the FDT so round it up to 32 KB.
+#
+0x00000000|0x00008000
+DATA = {
+!if $(ARCH) == AARCH64
+ 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
+ 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
+ 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
+ 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
+ 0x41, 0x52, 0x4d, 0x64, # magic: "ARM\x64"
+ 0x00, 0x00, 0x00, 0x00 # res5
+!else
+ 0x08, 0x10, 0x4f, 0xe2, # adr r1, .
+ 0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+
+ 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
+ 0x18, 0x28, 0x6f, 0x01, # magic
+ 0x00, 0x00, 0x00, 0x00, # start
+ 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
+ 0x01, 0x02, 0x03, 0x04 # endiannness flag
+!endif
+}
+
+0x00008000|0x001f8000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+FvNameGuid = 8A91C08E-7D9D-4933-84D6-901D26D0766E
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+ INF ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
+ INF ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+ INF ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
+ INF ArmVirtPkg/HighMemDxe/HighMemDxe.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/Metronome/Metronome.inf
+ INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+
+ #
+ # Platform Driver
+ #
+ INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
+ INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+ INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ INF MdeModulePkg/Application/UiApp/UiApp.inf
+
+!if $(ENABLE_NETWORK) == TRUE
+ #
+ # Networking stack
+ #
+ INF NetworkPkg/SnpDxe/SnpDxe.inf
+ INF NetworkPkg/DpcDxe/DpcDxe.inf
+ INF NetworkPkg/ArpDxe/ArpDxe.inf
+ INF NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF NetworkPkg/Ip4Dxe/Ip4Dxe.inf
+ INF NetworkPkg/MnpDxe/MnpDxe.inf
+ INF NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
+ INF NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
+ INF NetworkPkg/Udp4Dxe/Udp4Dxe.inf
+ INF NetworkPkg/TcpDxe/TcpDxe.inf
+ INF NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ INF NetworkPkg/IScsiDxe/IScsiDxe.inf
+!endif
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+!if $(ARCH) == AARCH64
+ #
+ # EBC support
+ #
+ INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
+!endif
+
+ #
+ # TianoCore logo (splash screen)
+ #
+ INF MdeModulePkg/Logo/LogoDxe.inf
+
+ #
+ # Ramdisk support
+ #
+ INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF RuleOverride = SELF_RELOC ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+!include ArmVirtRules.fdf.inc
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (11 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 14:08 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Matteo.Carlini,
Laura.Moretta, nd
Kvmtool emulates a MC146818 RTC controller in the
MMIO space. To support this the MC146818 RTC driver
PcatRealTimeClockRuntimeDxe has been updated to
support MMIO accesses. PCDs for RTC Index and
Target register base addresses in the MMIO space
have been introduced. The KvmtoolRtcFdtClientLib
reads the MC146818 RTC MMIO base address region
from the Kvmtool device tree and updates the
Index and Target register PCDs.
As these PCDs are defined in PcAtChipsetPkg.dec,
this patch updates the CI script to add this
dependency.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtPkg.ci.yaml b/ArmVirtPkg/ArmVirtPkg.ci.yaml
index 4553725ee5285d08a25f5e736f6b1cd25f4ba3e9..554ffb2609b25b46caa1fee8e994e2e6ea51f18f 100644
--- a/ArmVirtPkg/ArmVirtPkg.ci.yaml
+++ b/ArmVirtPkg/ArmVirtPkg.ci.yaml
@@ -5,6 +5,8 @@
# used for code analysis.
#
# Copyright (c) Microsoft Corporation
+# Copyright (c) 2020, ARM Limited. All rights reserved.
+#
# SPDX-License-Identifier: BSD-2-Clause-Patent
##
{
@@ -34,6 +36,7 @@
"OvmfPkg/OvmfPkg.dec",
"EmbeddedPkg/EmbeddedPkg.dec",
"ArmPlatformPkg/ArmPlatformPkg.dec",
+ "PcAtChipsetPkg/PcAtChipsetPkg.dec",
"SecurityPkg/SecurityPkg.dec",
"ShellPkg/ShellPkg.dec" #Is this ok?
],
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (12 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 14:09 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, lersek, Matteo.Carlini,
Laura.Moretta, nd
Kvmtool is a virtual machine manager that can be used
to launch guest VMs. Support for Kvmtool virtual
platform has been added to ArmVirtPkg.
Add kvmtool to the ArmVirtPkg dictionary to prevent
the CI Spell check plugin from failing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/ArmVirtPkg/ArmVirtPkg.ci.yaml b/ArmVirtPkg/ArmVirtPkg.ci.yaml
index 554ffb2609b25b46caa1fee8e994e2e6ea51f18f..cbe66f82de484dfbec8c81261d98d3ff647193ae 100644
--- a/ArmVirtPkg/ArmVirtPkg.ci.yaml
+++ b/ArmVirtPkg/ArmVirtPkg.ci.yaml
@@ -98,7 +98,8 @@
"unbootable",
"virt's",
"werror",
- "xenio"
+ "xenio",
+ "kvmtool"
], # words to extend to the dictionary for this package
"IgnoreStandardPaths": [], # Standard Plugin defined paths that should be ignore
"AdditionalIncludePaths": [] # Additional paths to spell check (wildcards supported)
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
` (13 preceding siblings ...)
2020-06-24 13:34 ` [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
@ 2020-06-24 13:34 ` Sami Mujawar
2020-06-25 14:09 ` Ard Biesheuvel
14 siblings, 1 reply; 38+ messages in thread
From: Sami Mujawar @ 2020-06-24 13:34 UTC (permalink / raw)
To: devel
Cc: Sami Mujawar, ard.biesheuvel, leif, michael.d.kinney,
Matteo.Carlini, Laura.Moretta, nd
Kvmtool is a virtual machine manager that can be used
to launch guest partitions. It additionally emulates
some hardware components e.g. RTC, CFI etc. essentially
providing a virtual platform for a guest operating
system (OS) to run.
A standards-based OS would need UEFI firmware support
for the Kvmtool virtual platform, for which additional
modules are added to ArmVirtPkg.
Adding myself as reviewer for these modules as
advised on mailing list discussion at
- https://edk2.groups.io/g/devel/topic/30915279#30693
- https://edk2.groups.io/g/devel/topic/74200911#59650
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- Updated Maintainers.txt to add reviewer for Kvmtool platform. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200911#59650
Maintainers.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Maintainers.txt b/Maintainers.txt
index 32c9003a6209f38da4e422191a4ae327fd166dc0..2d9aefa6ed3181553ce908ddd85d6078fd5f829c 100644
--- a/Maintainers.txt
+++ b/Maintainers.txt
@@ -152,6 +152,16 @@ F: ArmVirtPkg/XenPlatformHasAcpiDtDxe/
F: ArmVirtPkg/XenioFdtDxe/
R: Julien Grall <julien@xen.org>
+ArmVirtPkg: Kvmtool emulated platform support
+F: ArmVirtPkg/ArmVirtKvmTool.*
+F: ArmVirtPkg/KvmtoolPlatformDxe/
+F: ArmVirtPkg/Library/Fdt16550SerialPortHookLib/
+F: ArmVirtPkg/Library/KvmtoolPlatformPeiLib/
+F: ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/
+F: ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/
+F: ArmVirtPkg/Library/NorFlashKvmtoolLib/
+R: Sami Mujawar <sami.mujawar@arm.com>
+
BaseTools
F: BaseTools/
W: https://github.com/tianocore/tianocore.github.io/wiki/BaseTools
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-06-24 13:34 ` [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
@ 2020-06-25 8:45 ` Philippe Mathieu-Daudé
2020-06-25 11:19 ` [edk2-devel] " Ard Biesheuvel
2020-06-25 11:38 ` Ard Biesheuvel
1 sibling, 1 reply; 38+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-25 8:45 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: ard.biesheuvel, leif, lersek, Alexandru.Elisei, Andre.Przywara,
Matteo.Carlini, Laura.Moretta, nd
Hi Sami,
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool places the base address of the CFI flash in
> the device tree it passes to UEFI. This library
> parses the kvmtool device tree to read the CFI base
> address and initialise the PCDs use by the NOR flash
> driver and the variable storage.
>
> UEFI takes ownership of the CFI flash hardware, and
> exposes its functionality through the UEFI Runtime
> Variable Service. Therefore, disable the device tree
> node for the CFI flash used for storing the UEFI
> variables, to prevent the OS from attaching its device
> driver as well.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> v3:
> - ASSERT is sufficient to test Locating [Ard]
> gFdtClientProtocolGuid as DEPEX ensures that this is
> guaranteed to succeed.
> - Removed additional error handling based on review [Sami]
> feedback.
> - Fix confusion caused by use of macro MAX_FLASH_BANKS. [Philippe]
> - Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES. [Sami]
> - Use macro to define block size for flash. [Philippe]
> - Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured [Sami]
> to reflect the correct block size 64KB.
> - Disable the DT flash node used for UEFI variable storage [Sami]
> as UEFI takes ownership of the flash device.
> Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
>
> v2:
> - Library to read CFI flash base address from DT and initialise [Sami]
> PCDs used for NOR flash variables.
>
> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330 ++++++++++++++++++++
> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
> 2 files changed, 379 insertions(+)
>
> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..8e9dcf31691b4b12b9c7bac1ad4ba8d3a534a1d8
> --- /dev/null
> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> @@ -0,0 +1,330 @@
> +/** @file
> + An instance of the NorFlashPlatformLib for Kvmtool platform.
> +
> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + **/
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/NorFlashPlatformLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Protocol/FdtClient.h>
> +
> +/** Macro defining the NOR block size configured in Kvmtool.
> +*/
> +#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
> +
> +/** Macro defining the maximum number of Flash devices.
> +*/
> +#define MAX_FLASH_DEVICES 4
I am sorry but I am still confused...
This is about the QEMU Virt machine, right?
This machine was supposed to have 1 single flash, see QEMU commit
f5fdcd6e58 ("hw/arm: Add 'virt' platform") from Nov 2013:
/* Addresses and sizes of our components.
* 0..128MB is space for a flash device so we can run bootrom code
such as UEFI.
...
Due to limitations in the QEMU cfi-flash model, instead of using
a single flash device (with proper sector/bank protection), two
devices were added in QEMU commit acf82361c6 ("hw/arm/virt: Provide
flash devices for boot ROMs") Sep 2014:
Add two flash devices to the virt board, so that it can be used for
running guests which want a bootrom image such as UEFI. We provide
two flash devices to make it more convenient to provide both a
read-only UEFI image and a read-write place to store guest-set
UEFI config variables. The '-bios' command line option is set up
to provide an image for the first of the two flash devices.
What do you declare maximum 4 devices?
Thanks,
Phil.
> +
> +/** Macro defining the cfi-flash label describing the UEFI variable store.
> +*/
> +#define LABEL_UEFI_VAR_STORE "System-firmware"
> +
> +STATIC NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
> +STATIC UINTN mNorFlashDeviceCount = 0;
> +STATIC INT32 mUefiVarStoreNode = MAX_INT32;
> +STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
> +
> +/** This function performs platform specific actions to initialise
> + the NOR flash, if required.
> +
> + @retval EFI_SUCCESS Success.
> +**/
> +EFI_STATUS
> +NorFlashPlatformInitialization (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> +
> + DEBUG ((DEBUG_INFO, "NorFlashPlatformInitialization\n"));
> +
> + if ((mNorFlashDeviceCount > 0) && (mUefiVarStoreNode != MAX_INT32)) {
> + //
> + // UEFI takes ownership of the cfi-flash hardware, and exposes its
> + // functionality through the UEFI Runtime Variable Service. This means we
> + // need to disable it in the device tree to prevent the OS from attaching
> + // its device driver as well.
> + // Note: This library is loaded by the FaultTolerantWriteDxe to setup the
> + // Ftw PCDs and later by the NorFlashDxe to provide the NorFlashPlatformLib
> + // interfaces. Therefore the FDT node used for UEFI storage variable is
> + // disabled here.
> + //
> + Status = mFdtClient->SetNodeProperty (
> + mFdtClient,
> + mUefiVarStoreNode,
> + "status",
> + "disabled",
> + sizeof ("disabled")
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_WARN, "Failed to set cfi-flash status to 'disabled'\n"));
> + }
> + } else {
> + Status = EFI_NOT_FOUND;
> + DEBUG ((DEBUG_ERROR, "Flash device for UEFI variable storage not found\n"));
> + }
> +
> + return Status;
> +}
> +
> +/** Initialise Non volatile Flash storage variables.
> +
> + @param [in] FlashDevice Pointer to the NOR Flash device.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_OUT_OF_RESOURCES Insufficient flash storage space.
> +**/
> +EFI_STATUS
> +SetupVariableStore (
> + IN NOR_FLASH_DESCRIPTION * FlashDevice
> + )
> +{
> + UINTN FlashRegion;
> + UINTN FlashNvStorageVariableBase;
> + UINTN FlashNvStorageFtwWorkingBase;
> + UINTN FlashNvStorageFtwSpareBase;
> + UINTN FlashNvStorageVariableSize;
> + UINTN FlashNvStorageFtwWorkingSize;
> + UINTN FlashNvStorageFtwSpareSize;
> +
> + FlashNvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
> + FlashNvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> + FlashNvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> +
> + if ((FlashNvStorageVariableSize == 0) ||
> + (FlashNvStorageFtwWorkingSize == 0) ||
> + (FlashNvStorageFtwSpareSize == 0)) {
> + DEBUG ((DEBUG_ERROR, "FlashNvStorage size not defined\n"));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // Setup the variable store
> + FlashRegion = FlashDevice->DeviceBaseAddress;
> +
> + FlashNvStorageVariableBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageVariableSize);
> +
> + FlashNvStorageFtwWorkingBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> +
> + FlashNvStorageFtwSpareBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> +
> + if (FlashRegion > (FlashDevice->DeviceBaseAddress + FlashDevice->Size)) {
> + DEBUG ((DEBUG_ERROR, "Insufficient flash storage size\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + PcdSet32S (
> + PcdFlashNvStorageVariableBase,
> + FlashNvStorageVariableBase
> + );
> +
> + PcdSet32S (
> + PcdFlashNvStorageFtwWorkingBase,
> + FlashNvStorageFtwWorkingBase
> + );
> +
> + PcdSet32S (
> + PcdFlashNvStorageFtwSpareBase,
> + FlashNvStorageFtwSpareBase
> + );
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageVariableBase = 0x%x\n",
> + FlashNvStorageVariableBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageVariableSize = 0x%x\n",
> + FlashNvStorageVariableSize
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwWorkingBase = 0x%x\n",
> + FlashNvStorageFtwWorkingBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwWorkingSize = 0x%x\n",
> + FlashNvStorageFtwWorkingSize
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwSpareBase = 0x%x\n",
> + FlashNvStorageFtwSpareBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwSpareSize = 0x%x\n",
> + FlashNvStorageFtwSpareSize
> + ));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/** Return the Flash devices on the platform.
> +
> + @param [out] NorFlashDescriptions Pointer to the Flash device description.
> + @param [out] Count Number of Flash devices.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +NorFlashPlatformGetDevices (
> + OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
> + OUT UINT32 *Count
> + )
> +{
> + if (mNorFlashDeviceCount > 0) {
> + *NorFlashDescriptions = mNorFlashDevices;
> + *Count = mNorFlashDeviceCount;
> + return EFI_SUCCESS;
> + }
> + return EFI_NOT_FOUND;
> +}
> +
> +/** Entrypoint for NorFlashPlatformLib.
> +
> + @param [in] ImageHandle The handle to the image.
> + @param [in] SystemTable Pointer to the System Table.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +EFIAPI
> +NorFlashPlatformLibConstructor (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE * SystemTable
> + )
> +{
> + INT32 Node;
> + EFI_STATUS Status;
> + EFI_STATUS FindNodeStatus;
> + CONST UINT32 *Reg;
> + UINT32 PropSize;
> + UINT64 Base;
> + UINT64 Size;
> + UINTN UefiVarStoreIndex;
> + CONST CHAR8 *Label;
> + UINT32 LabelLen;
> +
> + if (mNorFlashDeviceCount != 0) {
> + return EFI_SUCCESS;
> + }
> +
> + Status = gBS->LocateProtocol (
> + &gFdtClientProtocolGuid,
> + NULL,
> + (VOID **)&mFdtClient
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + UefiVarStoreIndex = MAX_UINTN;
> + for (FindNodeStatus = mFdtClient->FindCompatibleNode (
> + mFdtClient,
> + "cfi-flash",
> + &Node
> + );
> + !EFI_ERROR (FindNodeStatus) &&
> + (mNorFlashDeviceCount < MAX_FLASH_DEVICES);
> + FindNodeStatus = mFdtClient->FindNextCompatibleNode (
> + mFdtClient,
> + "cfi-flash",
> + Node,
> + &Node
> + )) {
> + Status = mFdtClient->GetNodeProperty (
> + mFdtClient,
> + Node,
> + "label",
> + (CONST VOID **)&Label,
> + &LabelLen
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: GetNodeProperty ('label') failed (Status == %r)\n",
> + __FUNCTION__,
> + Status
> + ));
> + } else if (AsciiStrCmp (Label, LABEL_UEFI_VAR_STORE) == 0) {
> + UefiVarStoreIndex = mNorFlashDeviceCount;
> + mUefiVarStoreNode = Node;
> + }
> +
> + Status = mFdtClient->GetNodeProperty (
> + mFdtClient,
> + Node,
> + "reg",
> + (CONST VOID **)&Reg,
> + &PropSize
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n",
> + __FUNCTION__, Status));
> + continue;
> + }
> +
> + ASSERT ((PropSize % (4 * sizeof (UINT32))) == 0);
> +
> + while ((PropSize >= (4 * sizeof (UINT32))) &&
> + (mNorFlashDeviceCount < MAX_FLASH_DEVICES)) {
> + Base = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
> + Size = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
> + Reg += 4;
> +
> + PropSize -= 4 * sizeof (UINT32);
> +
> + //
> + // Disregard any flash devices that overlap with the primary FV.
> + // The firmware is not updatable from inside the guest anyway.
> + //
> + if ((PcdGet64 (PcdFvBaseAddress) + PcdGet32 (PcdFvSize) > Base) &&
> + (Base + Size) > PcdGet64 (PcdFvBaseAddress)) {
> + continue;
> + }
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "NOR%d : Base = 0x%lx, Size = 0x%lx\n",
> + mNorFlashDeviceCount,
> + Base,
> + Size
> + ));
> +
> + mNorFlashDevices[mNorFlashDeviceCount].DeviceBaseAddress = (UINTN)Base;
> + mNorFlashDevices[mNorFlashDeviceCount].RegionBaseAddress = (UINTN)Base;
> + mNorFlashDevices[mNorFlashDeviceCount].Size = (UINTN)Size;
> + mNorFlashDevices[mNorFlashDeviceCount].BlockSize = KVMTOOL_NOR_BLOCK_SIZE;
> + mNorFlashDeviceCount++;
> + }
> + } // for
> +
> + // Setup the variable store in the last device
> + if (mNorFlashDeviceCount > 0) {
> + if (UefiVarStoreIndex == MAX_UINTN) {
> + // We did not find a label matching the UEFI Variable store. Default to
> + // using the last cfi-flash device as the variable store.
> + UefiVarStoreIndex = mNorFlashDeviceCount - 1;
> + mUefiVarStoreNode = Node;
> + }
> + if (mNorFlashDevices[UefiVarStoreIndex].DeviceBaseAddress != 0) {
> + return SetupVariableStore (&mNorFlashDevices[UefiVarStoreIndex]);
> + }
> + }
> +
> + return EFI_NOT_FOUND;
> +}
> +
> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..a3230e4b2be668904322103825b93e867503984e
> --- /dev/null
> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> @@ -0,0 +1,49 @@
> +#/** @file
> +#
> +# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = NorFlashKvmtoolLib
> + FILE_GUID = E75F07A1-B160-4893-BDD4-09E32FF847DC
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = NorFlashPlatformLib
> + CONSTRUCTOR = NorFlashPlatformLibConstructor
> +
> +[Sources.common]
> + NorFlashKvmtool.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + ArmPlatformPkg/ArmPlatformPkg.dec
> + ArmVirtPkg/ArmVirtPkg.dec
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> + PcdLib
> + UefiBootServicesTableLib
> +
> +[Protocols]
> + gFdtClientProtocolGuid ## CONSUMES
> +
> +[Pcd]
> + gArmTokenSpaceGuid.PcdFvBaseAddress
> + gArmTokenSpaceGuid.PcdFvSize
> +
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
> +
> +[Depex]
> + gFdtClientProtocolGuid
> +
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [edk2-devel] [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-06-25 8:45 ` Philippe Mathieu-Daudé
@ 2020-06-25 11:19 ` Ard Biesheuvel
2020-06-25 11:41 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 11:19 UTC (permalink / raw)
To: devel, philmd, Sami Mujawar
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/25/20 10:45 AM, Philippe Mathieu-Daudé via groups.io wrote:
> Hi Sami,
>
> On 6/24/20 3:34 PM, Sami Mujawar wrote:
>> Kvmtool places the base address of the CFI flash in
>> the device tree it passes to UEFI. This library
>> parses the kvmtool device tree to read the CFI base
>> address and initialise the PCDs use by the NOR flash
>> driver and the variable storage.
>>
>> UEFI takes ownership of the CFI flash hardware, and
>> exposes its functionality through the UEFI Runtime
>> Variable Service. Therefore, disable the device tree
>> node for the CFI flash used for storing the UEFI
>> variables, to prevent the OS from attaching its device
>> driver as well.
>>
>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>> Acked-by: Laszlo Ersek <lersek@redhat.com>
>> ---
>>
>> Notes:
>> v3:
>> - ASSERT is sufficient to test Locating [Ard]
>> gFdtClientProtocolGuid as DEPEX ensures that this is
>> guaranteed to succeed.
>> - Removed additional error handling based on review [Sami]
>> feedback.
>> - Fix confusion caused by use of macro MAX_FLASH_BANKS. [Philippe]
>> - Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES. [Sami]
>> - Use macro to define block size for flash. [Philippe]
>> - Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured [Sami]
>> to reflect the correct block size 64KB.
>> - Disable the DT flash node used for UEFI variable storage [Sami]
>> as UEFI takes ownership of the flash device.
>> Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
>>
>> v2:
>> - Library to read CFI flash base address from DT and initialise [Sami]
>> PCDs used for NOR flash variables.
>>
>> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330 ++++++++++++++++++++
>> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
>> 2 files changed, 379 insertions(+)
>>
>> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..8e9dcf31691b4b12b9c7bac1ad4ba8d3a534a1d8
>> --- /dev/null
>> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
>> @@ -0,0 +1,330 @@
>> +/** @file
>> + An instance of the NorFlashPlatformLib for Kvmtool platform.
>> +
>> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
>> +
>> + SPDX-License-Identifier: BSD-2-Clause-Patent
>> +
>> + **/
>> +
>> +#include <Library/BaseLib.h>
>> +#include <Library/DebugLib.h>
>> +#include <Library/NorFlashPlatformLib.h>
>> +#include <Library/UefiBootServicesTableLib.h>
>> +#include <Protocol/FdtClient.h>
>> +
>> +/** Macro defining the NOR block size configured in Kvmtool.
>> +*/
>> +#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
>> +
>> +/** Macro defining the maximum number of Flash devices.
>> +*/
>> +#define MAX_FLASH_DEVICES 4
>
> I am sorry but I am still confused...
>
> This is about the QEMU Virt machine, right?
>
> This machine was supposed to have 1 single flash, see QEMU commit
> f5fdcd6e58 ("hw/arm: Add 'virt' platform") from Nov 2013:
>
> /* Addresses and sizes of our components.
> * 0..128MB is space for a flash device so we can run bootrom code
> such as UEFI.
> ...
>
> Due to limitations in the QEMU cfi-flash model, instead of using
> a single flash device (with proper sector/bank protection), two
> devices were added in QEMU commit acf82361c6 ("hw/arm/virt: Provide
> flash devices for boot ROMs") Sep 2014:
>
> Add two flash devices to the virt board, so that it can be used for
> running guests which want a bootrom image such as UEFI. We provide
> two flash devices to make it more convenient to provide both a
> read-only UEFI image and a read-write place to store guest-set
> UEFI config variables. The '-bios' command line option is set up
> to provide an image for the first of the two flash devices.
>
> What do you declare maximum 4 devices?
>
Kvmtool != QEMU, so whatever QEMU does is irrelevant for this series.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-06-24 13:34 ` [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
@ 2020-06-25 11:24 ` Ard Biesheuvel
2020-06-29 2:36 ` [edk2-devel] " Guomin Jiang
0 siblings, 1 reply; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 11:24 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, ray.ni, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Some virtual machine managers like Kvmtool emulate the MC146818
> RTC controller in the MMIO space so that architectures that do
> not support I/O Mapped I/O can use the RTC. This patch adds MMIO
> support to the RTC controller driver.
>
> The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
> If PcdRtcUseMmio is:
> TRUE - Indicates the RTC port registers are in MMIO space.
> FALSE - Indicates the RTC port registers are in I/O space.
> Default is I/O space.
>
> Additionally two new PCDs PcdRtcIndexRegister64 and
> PcdRtcTargetRegister64 have been introduced to provide the base
> address for the RTC registers in the MMIO space.
>
> When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
> converts the pointers to the RTC MMIO registers so that the
> RTC registers are accessible post ExitBootServices.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Can't we implement this without function pointers? What Leif suggested
was using STATIC helper functions for read and write, where each one has
a test for the feature PCD to decide whether to use the IO or the MMIO
version.
Using function pointers is unneeded complexity, especially given the
fact that we need to fix up their values when the address space is
virtually remapped by the OS.
> ---
>
> Notes:
> v3:
> - Make PcdRtcUseMmio a feature PCD. [Sami]
> - Read the RTC MMIO base address from the DT. [Andre]
> - Introduce PCDs for RTC Index and Target register base [Sami]
> address in the MMIO space.
> - Move RTC MMIO region mapping code to a separate platform [Sami]
> specific library. This library also reads the base addresses
> for the RTC from DT and configures the RTC Index and Target
> register PCDs.
> Ref: https://edk2.groups.io/g/devel/topic/74200905#60307
>
> v2:
> - Code review comments incorporated. [Sami]
>
> v1:
> - Add support to read/write from RTC registers using MMIO access [Sami]
> - Use wrapper functions for RtcRead/Write accessors [Leif]
> Ref: https://edk2.groups.io/g/devel/topic/30915281#30695
>
> PcAtChipsetPkg/PcAtChipsetPkg.dec | 16 +++
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 119 +++++++++++++++++---
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h | 31 +++++
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c | 72 +++++++++++-
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf | 8 ++
> 5 files changed, 230 insertions(+), 16 deletions(-)
>
> diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec b/PcAtChipsetPkg/PcAtChipsetPkg.dec
> index 88de5cceea593176c3a2425a5963b66b789f2b9e..ed2d95550b8d153995b30cdc290cf3bb905e211b 100644
> --- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
> +++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
> @@ -6,6 +6,7 @@
> #
> # Copyright (c) 2009 - 2019, Intel Corporation. All rights reserved.<BR>
> # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -41,6 +42,13 @@ [PcdsFeatureFlag]
> # @Prompt Configure HPET to use MSI.
> gPcAtChipsetPkgTokenSpaceGuid.PcdHpetMsiEnable|TRUE|BOOLEAN|0x00001000
>
> + ## Indicates the RTC port registers are in MMIO space, or in I/O space.
> + # Default is I/O space.<BR><BR>
> + # TRUE - RTC port registers are in MMIO space.<BR>
> + # FALSE - RTC port registers are in I/O space.<BR>
> + # @Prompt RTC port registers use MMIO.
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|FALSE|BOOLEAN|0x00000021
> +
> [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
> ## This PCD specifies the base address of the HPET timer.
> # @Prompt HPET base address.
> @@ -68,6 +76,14 @@ [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
> # @Expression 0x80000001 | gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear < gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x0000000E
>
> + ## Specifies RTC Index Register address in MMIO space.
> + # @Prompt RTC Index Register address
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0|UINT64|0x00000022
> +
> + ## Specifies RTC Target Register address in MMIO space.
> + # @Prompt RTC Target Register address
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0|UINT64|0x00000023
> +
> [PcdsFixedAtBuild, PcdsPatchableInModule]
> ## Defines the ACPI register set base address.
> # The invalid 0xFFFF is as its default value. It must be configured to the real value.
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> index 52af17941786ef81c3911512ee64551724e67209..5ddc06549103ce9944054d3a05b73803f7037ec2 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> @@ -3,6 +3,7 @@
>
> Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -10,6 +11,9 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>
> #include "PcRtc.h"
>
> +extern UINTN mRtcIndexRegister;
> +extern UINTN mRtcTargetRegister;
> +
> //
> // Days of month.
> //
> @@ -21,6 +25,28 @@ UINTN mDayOfMonth[] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
> CHAR16 mTimeZoneVariableName[] = L"RTC";
>
> /**
> + A function pointer that evaluates to a function that reads the RTC content
> + through its registers either using IO or MMIO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> +
> + @return The data of UINT8 type read from RTC.
> +**/
> +RTC_READ RtcRead;
> +
> +/**
> + A function pointer that evaluates to a function that reads the RTC content
> + through its registers either using IO or MMIO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> +
> + @return The data of UINT8 type read from RTC.
> +**/
> +RTC_WRITE RtcWrite;
> +
> +/**
> Compare the Hour, Minute and Second of the From time and the To time.
>
> Only compare H/M/S in EFI_TIME and ignore other fields here.
> @@ -54,41 +80,96 @@ IsWithinOneDay (
> );
>
> /**
> - Read RTC content through its registers.
> + Read RTC content through its registers using IO access.
>
> - @param Address Address offset of RTC. It is recommended to use macros such as
> - RTC_ADDRESS_SECONDS.
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
>
> @return The data of UINT8 type read from RTC.
> **/
> +STATIC
> UINT8
> -RtcRead (
> - IN UINT8 Address
> +EFIAPI
> +IoRtcRead (
> + IN UINTN Address
> )
> {
> - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
> + IoWrite8 (
> + PcdGet8 (PcdRtcIndexRegister),
> + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
> + );
> return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
> }
>
> /**
> - Write RTC through its registers.
> + Write RTC through its registers using IO access.
>
> - @param Address Address offset of RTC. It is recommended to use macros such as
> - RTC_ADDRESS_SECONDS.
> - @param Data The content you want to write into RTC.
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> + @param Data The content you want to write into RTC.
>
> **/
> +STATIC
> VOID
> -RtcWrite (
> - IN UINT8 Address,
> +EFIAPI
> +IoRtcWrite (
> + IN UINTN Address,
> IN UINT8 Data
> )
> {
> - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8) (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
> + IoWrite8 (
> + PcdGet8 (PcdRtcIndexRegister),
> + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80))
> + );
> IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
> }
>
> /**
> + Read RTC content through its registers using MMIO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> +
> + @return The data of UINT8 type read from RTC.
> +**/
> +STATIC
> +UINT8
> +EFIAPI
> +MmioRtcRead (
> + IN UINTN Address
> + )
> +{
> + MmioWrite8 (
> + mRtcIndexRegister,
> + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
> + );
> + return MmioRead8 (mRtcTargetRegister);
> +}
> +
> +/**
> + Write RTC through its registers using MMIO access.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> + @param Data The content you want to write into RTC.
> +
> +**/
> +STATIC
> +VOID
> +EFIAPI
> +MmioRtcWrite (
> + IN UINTN Address,
> + IN UINT8 Data
> + )
> +{
> + MmioWrite8 (
> + mRtcIndexRegister,
> + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
> + );
> + MmioWrite8 (mRtcTargetRegister, Data);
> +}
> +
> +/**
> Initialize RTC.
>
> @param Global For global use inside this module.
> @@ -113,6 +194,18 @@ PcRtcInit (
> BOOLEAN Pending;
>
> //
> + // Initialize the RtcRead and RtcWrite functions
> + // based on the chosen IO/MMIO access.
> + //
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + RtcRead = MmioRtcRead;
> + RtcWrite = MmioRtcWrite;
> + } else {
> + RtcRead = IoRtcRead;
> + RtcWrite = IoRtcWrite;
> + }
> +
> + //
> // Acquire RTC Lock to make access to RTC atomic
> //
> if (!EfiAtRuntime ()) {
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> index 47293ce44c5a1f4792892892f7da40d7f0a5a001..4074261c2ca5dbc7b0727ea7961154eaf41c0e38 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> @@ -3,6 +3,7 @@
>
> Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +Copyright (c) 2019 - 2020, ARM Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -371,4 +372,34 @@ PcRtcAcpiTableChangeCallback (
> IN EFI_EVENT Event,
> IN VOID *Context
> );
> +
> +/**
> + Function pointer to Read RTC content through its registers.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> +
> + @return The data of UINT8 type read from RTC.
> +**/
> +typedef
> +UINT8
> +(EFIAPI *RTC_READ) (
> + IN UINTN Address
> + );
> +
> +/**
> + Function pointer to Write RTC through its registers.
> +
> + @param Address Address offset of RTC. It is recommended to use
> + macros such as RTC_ADDRESS_SECONDS.
> + @param Data The content you want to write into RTC.
> +
> +**/
> +typedef
> +VOID
> +(EFIAPI *RTC_WRITE) (
> + IN UINTN Address,
> + IN UINT8 Data
> + );
> +
> #endif
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> index ccda6331373bfe4069b0a59495b5e5cc731c8fc8..e30883e53333aae655bbf891f86d1a6ed739715f 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> @@ -2,16 +2,33 @@
> Provides Set/Get time operations.
>
> Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
>
> +#include <Library/DxeServicesTableLib.h>
> #include "PcRtc.h"
>
> PC_RTC_MODULE_GLOBALS mModuleGlobal;
>
> EFI_HANDLE mHandle = NULL;
>
> +STATIC EFI_EVENT mVirtualAddrChangeEvent;
> +
> +UINTN mRtcIndexRegister;
> +UINTN mRtcTargetRegister;
> +
> +//
> +// Function pointer for the Rtc Read interface function
> +//
> +extern RTC_READ RtcRead;
> +
> +//
> +// Function pointer for the Rtc Write interface function
> +//
> +extern RTC_WRITE RtcWrite;
> +
> /**
> Returns the current time and date information, and the time-keeping capabilities
> of the hardware platform.
> @@ -106,6 +123,34 @@ PcRtcEfiSetWakeupTime (
> }
>
> /**
> + Fixup internal data so that EFI can be called in virtual mode.
> + Call the passed in Child Notify event and convert any pointers in
> + lib to virtual mode.
> +
> + @param[in] Event The Event that is being processed
> + @param[in] Context Event Context
> +**/
> +VOID
> +EFIAPI
> +LibRtcVirtualNotifyEvent (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + // Only needed if you are going to support the OS calling RTC functions in
> + // virtual mode. You will need to call EfiConvertPointer (). To convert any
> + // stored physical addresses to virtual address. After the OS transitions to
> + // calling in virtual mode, all future runtime calls will be made in virtual
> + // mode.
> + EfiConvertPointer (0x0, (VOID**)&mRtcIndexRegister);
> + EfiConvertPointer (0x0, (VOID**)&mRtcTargetRegister);
> +
> + // Convert the RtcRead and RtcWrite pointers for runtime use.
> + EfiConvertPointer (0x0, (VOID**)&RtcRead);
> + EfiConvertPointer (0x0, (VOID**)&RtcWrite);
> +}
> +
> +/**
> The user Entry Point for PcRTC module.
>
> This is the entry point for PcRTC module. It installs the UEFI runtime service
> @@ -125,12 +170,17 @@ InitializePcRtc (
> IN EFI_SYSTEM_TABLE *SystemTable
> )
> {
> - EFI_STATUS Status;
> - EFI_EVENT Event;
> + EFI_STATUS Status;
> + EFI_EVENT Event;
>
> EfiInitializeLock (&mModuleGlobal.RtcLock, TPL_CALLBACK);
> mModuleGlobal.CenturyRtcAddress = GetCenturyRtcAddress ();
>
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + mRtcIndexRegister = (UINTN)PcdGet64 (PcdRtcIndexRegister64);
> + mRtcTargetRegister = (UINTN)PcdGet64 (PcdRtcTargetRegister64);
> + }
> +
> Status = PcRtcInit (&mModuleGlobal);
> ASSERT_EFI_ERROR (Status);
>
> @@ -165,7 +215,23 @@ InitializePcRtc (
> NULL,
> NULL
> );
> - ASSERT_EFI_ERROR (Status);
> + if (EFI_ERROR (Status)) {
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> + }
> +
> + if (FeaturePcdGet (PcdRtcUseMmio)) {
> + // Register for the virtual address change event
> + Status = gBS->CreateEventEx (
> + EVT_NOTIFY_SIGNAL,
> + TPL_NOTIFY,
> + LibRtcVirtualNotifyEvent,
> + NULL,
> + &gEfiEventVirtualAddressChangeGuid,
> + &mVirtualAddrChangeEvent
> + );
> + ASSERT_EFI_ERROR (Status);
> + }
>
> return Status;
> }
> diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> index c73ee98105e510f9e4e23c1a6c1e5c505325d2c9..0d8eca28b65954b073a72fc4fe5ad6247320e79d 100644
> --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> @@ -6,6 +6,7 @@
> #
> # Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -61,6 +62,11 @@ [Guids]
> ## SOMETIMES_CONSUMES ## SystemTable
> gEfiAcpiTableGuid
>
> + gEfiEventVirtualAddressChangeGuid
> +
> +[FeaturePcd]
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio ## CONSUMES
> +
> [FixedPcd]
> gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA ## CONSUMES
> gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB ## CONSUMES
> @@ -72,6 +78,8 @@ [Pcd]
> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear ## CONSUMES
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister ## CONSUMES
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister ## CONSUMES
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64 ## CONSUMES
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64 ## CONSUMES
>
> [Depex]
> gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library
2020-06-24 13:34 ` [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
@ 2020-06-25 11:31 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 11:31 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Add library that parses the Kvmtool device tree and updates
> the dynamic PCDs describing the RTC Memory map.
>
> It also maps the MMIO region used by the RTC as runtime memory
> so that the RTC registers are accessible post ExitBootServices.
>
> Since UEFI takes ownership of the RTC hardware disable the RTC
> node in the DT to prevent the OS from attaching its device
> driver as well.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> ---
>
> Notes:
> v3:
> - Introduce library to read and map the MMIO base addresses [Sami]
> for the RTC registers from the DT and configure the Index
> and Target register PCDs.
>
> ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c | 255 ++++++++++++++++++++
> ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf | 42 ++++
> 2 files changed, 297 insertions(+)
>
> diff --git a/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..2f38923187c1a621578413be9c39fa425bde2ed1
> --- /dev/null
> +++ b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.c
> @@ -0,0 +1,255 @@
> +/** @file
> + FDT client library for motorola,mc146818 RTC driver
> +
> + Copyright (c) 2020, ARM Limited. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <PiDxe.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DxeServicesTableLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiDriverEntryPoint.h>
> +#include <Library/UefiLib.h>
> +#include <Protocol/FdtClient.h>
> +#include <Uefi.h>
> +
This list of #includes seems a bit long and is out of sync with your
[LibraryClasses] INF section. Could you clean that up please?
> +/** RTC Index register is at offset 0x0
> +*/
> +#define RTC_INDEX_REG_OFFSET 0x0ULL
> +
> +/** RTC Target register is at offset 0x1
> +*/
> +#define RTC_TARGET_REG_OFFSET 0x1ULL
> +
> +/** Add the RTC controller address range to the memory map.
> +
> + @param [in] ImageHandle The handle to the image.
> + @param [in] RtcPageBase Base address of the RTC controller.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
STATIC?
> +EFIAPI
You can drop EFIAPI then as well
> +KvmtoolRtcMapMemory (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_PHYSICAL_ADDRESS RtcPageBase
> + )
> +{
> + EFI_STATUS Status;
> + EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
> + BOOLEAN MemorySpaceAdded;
> +
> + MemorySpaceAdded = FALSE;
> +
> + Status = gDS->GetMemorySpaceDescriptor (RtcPageBase, &Descriptor);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR, "Failed to get memory space descriptor. Status = %r\n",
> + Status
> + ));
> + return Status;
> + }
> +
> + if (Descriptor.GcdMemoryType == EfiGcdMemoryTypeNonExistent) {
Why you need this test? Are there cases where the GCD region already exists?
> + Status = gDS->AddMemorySpace (
> + EfiGcdMemoryTypeMemoryMappedIo,
> + RtcPageBase,
> + EFI_PAGE_SIZE,
> + EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR, "Failed to add memory space. Status = %r\n",
> + Status
> + ));
> + return Status;
> + }
> + MemorySpaceAdded = TRUE;
> + }
> +
> + Status = gDS->AllocateMemorySpace (
> + EfiGcdAllocateAddress,
> + EfiGcdMemoryTypeMemoryMappedIo,
> + 0,
> + EFI_PAGE_SIZE,
> + &RtcPageBase,
> + ImageHandle,
> + NULL
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "Failed to allocate memory space. Status = %r\n",
> + Status
> + ));
> + if (MemorySpaceAdded) {
> + gDS->RemoveMemorySpace (
> + RtcPageBase,
> + EFI_PAGE_SIZE
> + );
> + }
> + return Status;
> + }
> +
> + Status = gDS->SetMemorySpaceAttributes (
> + RtcPageBase,
> + EFI_PAGE_SIZE,
> + EFI_MEMORY_UC | EFI_MEMORY_RUNTIME
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "Failed to set memory attributes. Status = %r\n",
> + Status
> + ));
> + gDS->FreeMemorySpace (
> + RtcPageBase,
> + EFI_PAGE_SIZE
> + );
> + if (MemorySpaceAdded) {
> + gDS->RemoveMemorySpace (
> + RtcPageBase,
> + EFI_PAGE_SIZE
> + );
> + }
> + }
> +
> + return Status;
> +}
> +
> +/** Entrypoint for KvmtoolRtcFdtClientLib.
> +
> + Locate the RTC node in the DT and update the Index and
> + Target register base addresses in the respective PCDs.
> + Add the RTC memory region to the memory map.
> + Disable the RTC node as the RTC is owned by UEFI.
> +
> + @param [in] ImageHandle The handle to the image.
> + @param [in] SystemTable Pointer to the System Table.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +EFIAPI
> +KvmtoolRtcFdtClientLibConstructor (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> + FDT_CLIENT_PROTOCOL *FdtClient;
> + INT32 Node;
> + CONST UINT64 *Reg;
> + UINT32 RegSize;
> + UINT64 RegBase;
> + UINT64 Range;
> + RETURN_STATUS PcdStatus;
> +
> + Status = gBS->LocateProtocol (
> + &gFdtClientProtocolGuid,
> + NULL,
> + (VOID **)&FdtClient
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + Status = FdtClient->FindCompatibleNode (
> + FdtClient,
> + "motorola,mc146818",
> + &Node
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: No 'motorola,mc146818' compatible DT node found\n",
> + __FUNCTION__
> + ));
> + return Status;
> + }
> +
> + Status = FdtClient->GetNodeProperty (
> + FdtClient,
> + Node,
> + "reg",
> + (CONST VOID **)&Reg,
> + &RegSize
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: No 'reg' property found in 'motorola,mc146818' compatible DT node\n",
> + __FUNCTION__
> + ));
> + return Status;
> + }
> +
> + ASSERT (RegSize == 16);
> +
> + RegBase = SwapBytes64 (Reg[0]);
> + Range = SwapBytes64 (Reg[1]);
Better to use ReadUnaligned64 here, and make Reg a UINT32[] or a VOID *,
as it may not be 64-bit aligned.
> + DEBUG ((
> + DEBUG_INFO,
> + "Found motorola,mc146818 RTC @ 0x%Lx Range = 0x%x\n",
> + RegBase,
> + Range
> + ));
> +
> + // The address range must cover the RTC Index and the Target registers.
> + ASSERT (Range >= 0x2);
> +
> + // RTC Index register is at offset 0x0
> + PcdStatus = PcdSet64S (
> + PcdRtcIndexRegister64,
> + (RegBase + RTC_INDEX_REG_OFFSET)
> + );
> + ASSERT_RETURN_ERROR (PcdStatus);
> +
> + // RTC Target register is at offset 0x1
> + PcdStatus = PcdSet64S (
> + PcdRtcTargetRegister64,
> + (RegBase + RTC_TARGET_REG_OFFSET)
> + );
> + ASSERT_RETURN_ERROR (PcdStatus);
> +
> + Status = KvmtoolRtcMapMemory (ImageHandle, (RegBase & ~(EFI_PAGE_SIZE - 1)));
Can you use EFI_PAGE_MASK here?
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "Failed to map memory for motorola,mc146818. Status = %r\n",
> + Status
> + ));
> + return Status;
> + }
> +
> + //
> + // UEFI takes ownership of the RTC hardware, and exposes its functionality
> + // through the UEFI Runtime Services GetTime, SetTime, etc. This means we
> + // need to disable it in the device tree to prevent the OS from attaching
> + // its device driver as well.
> + //
> + Status = FdtClient->SetNodeProperty (
> + FdtClient,
> + Node,
> + "status",
> + "disabled",
> + sizeof ("disabled")
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_WARN,
> + "Failed to set motorola,mc146818 status to 'disabled', Status = %r\n",
> + Status
> + ));
> + }
> +
> + return EFI_SUCCESS;
> +}
> diff --git a/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..0d1b27997ed00d7c1be3578cab4d1d2eba663a90
> --- /dev/null
> +++ b/ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
> @@ -0,0 +1,42 @@
> +#/** @file
> +# FDT client library for motorola,mc146818 RTC driver
> +#
> +# Copyright (c) 2020, ARM Limited. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = KvmtoolRtcFdtClientLib
> + FILE_GUID = 3254B4F7-30B5-48C6-B06A-D8FF97F3EF95
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = KvmtoolRtcFdtClientLib|DXE_DRIVER DXE_RUNTIME_DRIVER
> + CONSTRUCTOR = KvmtoolRtcFdtClientLibConstructor
> +
> +[Sources]
> + KvmtoolRtcFdtClientLib.c
> +
> +[Packages]
> + ArmVirtPkg/ArmVirtPkg.dec
> + MdePkg/MdePkg.dec
> + PcAtChipsetPkg/PcAtChipsetPkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> + PcdLib
> + UefiBootServicesTableLib
> + DxeServicesTableLib
> +
> +[Protocols]
> + gFdtClientProtocolGuid ## CONSUMES
> +
> +[Pcd]
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64
> +
> +[Depex]
> + gFdtClientProtocolGuid
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver
2020-06-24 13:34 ` [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
@ 2020-06-25 11:35 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 11:35 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool is a virtual machine manager that enables
> hosting KVM guests. It essentially provides a
> virtual hardware platform for guest operating
> systems.
>
> Kvmtool hands of a device tree containing the
> current hardware configuration to the firmware.
>
> A standards-based operating system would use
> ACPI to consume the platform hardware
> information, while some operating systems may
> prefer to use Device Tree.
>
> The KvmtoolPlatformDxe performs the platform
> actions like determining if the firmware should
> expose ACPI or the Device Tree based hardware
> description to the operating system.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> v3:
> - Don't use CpuDeadLoop()s in your drivers. [Ard]
> - Returned error code instead of dead loop. [Sami]
> - Installing a protocol on an image handle should not [Ard]
> ever fail. So just use ASSERT_EFI_ERROR().
> - Added assert and returned status code. [Sami]
> Ref: https://edk2.groups.io/g/devel/topic/74200911#59650
>
> v2:
> - Updated according to review comments. [Sami]
>
> v1:
> - Add kvmtool platform driver to support loading platform [Sami]
> specific information.
> - Keep code to initialise the variable storage PCDs in the [Laszlo]
> platform-specific FVB driver.
> - Document code derived from [Laszlo]
> "ArmVirtPkg/PlatformHasAcpiDtDxe"
> Ref: https://edk2.groups.io/g/devel/topic/30915278#30757
>
> ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c | 85 ++++++++++++++++++++
> ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf | 47 +++++++++++
> 2 files changed, 132 insertions(+)
>
> diff --git a/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..17a65bdff0c1a5851e45c2a9ede97f76236502e3
> --- /dev/null
> +++ b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.c
> @@ -0,0 +1,85 @@
> +/** @file
> +
> + The KvmtoolPlatformDxe performs the platform specific initialization like:
> + - It decides if the firmware should expose ACPI or Device Tree-based
> + hardware description to the operating system.
> +
> + Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <Guid/VariableFormat.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DxeServicesTableLib.h>
You are missing MemoryAllocationLib here - either add it here, or remove
it from LibraryClasses
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiDriverEntryPoint.h>
> +#include <Protocol/FdtClient.h>
> +
> +/** Decide if the firmware should expose ACPI tables or Device Tree and
> + install the appropriate protocol interface.
> +
> + Note: This function is derived from "ArmVirtPkg/PlatformHasAcpiDtDxe",
> + by dropping the word size check, and the fw_cfg check.
> +
> + @param [in] ImageHandle Handle for this image.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_OUT_OF_RESOURCES There was not enough memory to install the
> + protocols.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +PlatformHasAcpiDt (
> + IN EFI_HANDLE ImageHandle
> + )
> +{
> + if (!PcdGetBool (PcdForceNoAcpi)) {
> + // Expose ACPI tables
> + return gBS->InstallProtocolInterface (
> + &ImageHandle,
> + &gEdkiiPlatformHasAcpiGuid,
> + EFI_NATIVE_INTERFACE,
> + NULL
> + );
> + }
> +
> + // Expose the Device Tree.
> + return gBS->InstallProtocolInterface (
> + &ImageHandle,
> + &gEdkiiPlatformHasDeviceTreeGuid,
> + EFI_NATIVE_INTERFACE,
> + NULL
> + );
> +}
> +
> +/** Entry point for Kvmtool Platform Dxe
> +
> + @param [in] ImageHandle Handle for this image.
> + @param [in] SystemTable Pointer to the EFI system table.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_OUT_OF_RESOURCES There was not enough memory to install the
> + protocols.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +KvmtoolPlatformDxeEntryPoint (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = PlatformHasAcpiDt (ImageHandle);
> + ASSERT_EFI_ERROR (Status);
> +
> + return Status;
> +}
> diff --git a/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..08a0fe5ce14469133479046385bdd48c22698639
> --- /dev/null
> +++ b/ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
> @@ -0,0 +1,47 @@
> +#/** @file
> +#
> +# The KvmtoolPlatformDxe performs the platform specific initialization like:
> +# - It decides if the firmware should expose ACPI or Device Tree-based
> +# hardware description to the operating system.
> +#
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = KvmtoolPlatformDxe
> + FILE_GUID = 7479CCCD-D721-442A-8C73-A72DBB886669
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = KvmtoolPlatformDxeEntryPoint
> +
> +[Sources]
> + KvmtoolPlatformDxe.c
> +
> +[Packages]
> + ArmVirtPkg/ArmVirtPkg.dec
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + BaseMemoryLib
> + DebugLib
> + DxeServicesTableLib
> + MemoryAllocationLib
> + UefiBootServicesTableLib
> + UefiDriverEntryPoint
> +
> +[Guids]
> + gEdkiiPlatformHasAcpiGuid ## SOMETIMES_PRODUCES ## PROTOCOL
> + gEdkiiPlatformHasDeviceTreeGuid ## SOMETIMES_PRODUCES ## PROTOCOL
> +
> +[Pcd]
> + gArmVirtTokenSpaceGuid.PcdForceNoAcpi
> +
> +[Depex]
> + TRUE
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-06-24 13:34 ` [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
2020-06-25 8:45 ` Philippe Mathieu-Daudé
@ 2020-06-25 11:38 ` Ard Biesheuvel
2020-06-25 17:33 ` Sami Mujawar
1 sibling, 1 reply; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 11:38 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, philmd, lersek, Alexandru.Elisei, Andre.Przywara,
Matteo.Carlini, Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool places the base address of the CFI flash in
> the device tree it passes to UEFI. This library
> parses the kvmtool device tree to read the CFI base
> address and initialise the PCDs use by the NOR flash
> driver and the variable storage.
>
> UEFI takes ownership of the CFI flash hardware, and
> exposes its functionality through the UEFI Runtime
> Variable Service. Therefore, disable the device tree
> node for the CFI flash used for storing the UEFI
> variables, to prevent the OS from attaching its device
> driver as well.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> v3:
> - ASSERT is sufficient to test Locating [Ard]
> gFdtClientProtocolGuid as DEPEX ensures that this is
> guaranteed to succeed.
> - Removed additional error handling based on review [Sami]
> feedback.
> - Fix confusion caused by use of macro MAX_FLASH_BANKS. [Philippe]
> - Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES. [Sami]
> - Use macro to define block size for flash. [Philippe]
> - Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured [Sami]
> to reflect the correct block size 64KB.
> - Disable the DT flash node used for UEFI variable storage [Sami]
> as UEFI takes ownership of the flash device.
> Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
>
> v2:
> - Library to read CFI flash base address from DT and initialise [Sami]
> PCDs used for NOR flash variables.
>
> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330 ++++++++++++++++++++
> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
> 2 files changed, 379 insertions(+)
>
> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..8e9dcf31691b4b12b9c7bac1ad4ba8d3a534a1d8
> --- /dev/null
> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> @@ -0,0 +1,330 @@
> +/** @file
> + An instance of the NorFlashPlatformLib for Kvmtool platform.
> +
> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + **/
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/NorFlashPlatformLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Protocol/FdtClient.h>
> +
> +/** Macro defining the NOR block size configured in Kvmtool.
> +*/
> +#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
> +
> +/** Macro defining the maximum number of Flash devices.
> +*/
> +#define MAX_FLASH_DEVICES 4
> +
> +/** Macro defining the cfi-flash label describing the UEFI variable store.
> +*/
> +#define LABEL_UEFI_VAR_STORE "System-firmware"
> +
> +STATIC NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
> +STATIC UINTN mNorFlashDeviceCount = 0;
> +STATIC INT32 mUefiVarStoreNode = MAX_INT32;
> +STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
> +
> +/** This function performs platform specific actions to initialise
> + the NOR flash, if required.
> +
> + @retval EFI_SUCCESS Success.
> +**/
> +EFI_STATUS
> +NorFlashPlatformInitialization (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> +
> + DEBUG ((DEBUG_INFO, "NorFlashPlatformInitialization\n"));
> +
> + if ((mNorFlashDeviceCount > 0) && (mUefiVarStoreNode != MAX_INT32)) {
> + //
> + // UEFI takes ownership of the cfi-flash hardware, and exposes its
> + // functionality through the UEFI Runtime Variable Service. This means we
> + // need to disable it in the device tree to prevent the OS from attaching
> + // its device driver as well.
> + // Note: This library is loaded by the FaultTolerantWriteDxe to setup the
> + // Ftw PCDs and later by the NorFlashDxe to provide the NorFlashPlatformLib
> + // interfaces. Therefore the FDT node used for UEFI storage variable is
> + // disabled here.
> + //
> + Status = mFdtClient->SetNodeProperty (
> + mFdtClient,
> + mUefiVarStoreNode,
> + "status",
> + "disabled",
> + sizeof ("disabled")
> + );
Can you explain why this action is deferred to
NorFlashPlatformInitialization()?
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_WARN, "Failed to set cfi-flash status to 'disabled'\n"));
> + }
> + } else {
> + Status = EFI_NOT_FOUND;
> + DEBUG ((DEBUG_ERROR, "Flash device for UEFI variable storage not found\n"));
> + }
> +
> + return Status;
> +}
> +
> +/** Initialise Non volatile Flash storage variables.
> +
> + @param [in] FlashDevice Pointer to the NOR Flash device.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_OUT_OF_RESOURCES Insufficient flash storage space.
> +**/
STATIC
> +EFI_STATUS
> +SetupVariableStore (
> + IN NOR_FLASH_DESCRIPTION * FlashDevice
> + )
> +{
> + UINTN FlashRegion;
> + UINTN FlashNvStorageVariableBase;
> + UINTN FlashNvStorageFtwWorkingBase;
> + UINTN FlashNvStorageFtwSpareBase;
> + UINTN FlashNvStorageVariableSize;
> + UINTN FlashNvStorageFtwWorkingSize;
> + UINTN FlashNvStorageFtwSpareSize;
> +
> + FlashNvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
> + FlashNvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> + FlashNvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> +
> + if ((FlashNvStorageVariableSize == 0) ||
> + (FlashNvStorageFtwWorkingSize == 0) ||
> + (FlashNvStorageFtwSpareSize == 0)) {
> + DEBUG ((DEBUG_ERROR, "FlashNvStorage size not defined\n"));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // Setup the variable store
> + FlashRegion = FlashDevice->DeviceBaseAddress;
> +
> + FlashNvStorageVariableBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageVariableSize);
> +
> + FlashNvStorageFtwWorkingBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> +
> + FlashNvStorageFtwSpareBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> +
> + if (FlashRegion > (FlashDevice->DeviceBaseAddress + FlashDevice->Size)) {
> + DEBUG ((DEBUG_ERROR, "Insufficient flash storage size\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + PcdSet32S (
> + PcdFlashNvStorageVariableBase,
> + FlashNvStorageVariableBase
> + );
> +
> + PcdSet32S (
> + PcdFlashNvStorageFtwWorkingBase,
> + FlashNvStorageFtwWorkingBase
> + );
> +
> + PcdSet32S (
> + PcdFlashNvStorageFtwSpareBase,
> + FlashNvStorageFtwSpareBase
> + );
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageVariableBase = 0x%x\n",
> + FlashNvStorageVariableBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageVariableSize = 0x%x\n",
> + FlashNvStorageVariableSize
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwWorkingBase = 0x%x\n",
> + FlashNvStorageFtwWorkingBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwWorkingSize = 0x%x\n",
> + FlashNvStorageFtwWorkingSize
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwSpareBase = 0x%x\n",
> + FlashNvStorageFtwSpareBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwSpareSize = 0x%x\n",
> + FlashNvStorageFtwSpareSize
> + ));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/** Return the Flash devices on the platform.
> +
> + @param [out] NorFlashDescriptions Pointer to the Flash device description.
> + @param [out] Count Number of Flash devices.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +NorFlashPlatformGetDevices (
> + OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
> + OUT UINT32 *Count
> + )
> +{
> + if (mNorFlashDeviceCount > 0) {
> + *NorFlashDescriptions = mNorFlashDevices;
> + *Count = mNorFlashDeviceCount;
> + return EFI_SUCCESS;
> + }
> + return EFI_NOT_FOUND;
> +}
> +
> +/** Entrypoint for NorFlashPlatformLib.
> +
> + @param [in] ImageHandle The handle to the image.
> + @param [in] SystemTable Pointer to the System Table.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +EFIAPI
> +NorFlashPlatformLibConstructor (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE * SystemTable
> + )
> +{
> + INT32 Node;
> + EFI_STATUS Status;
> + EFI_STATUS FindNodeStatus;
> + CONST UINT32 *Reg;
> + UINT32 PropSize;
> + UINT64 Base;
> + UINT64 Size;
> + UINTN UefiVarStoreIndex;
> + CONST CHAR8 *Label;
> + UINT32 LabelLen;
> +
> + if (mNorFlashDeviceCount != 0) {
> + return EFI_SUCCESS;
> + }
> +
> + Status = gBS->LocateProtocol (
> + &gFdtClientProtocolGuid,
> + NULL,
> + (VOID **)&mFdtClient
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + UefiVarStoreIndex = MAX_UINTN;
> + for (FindNodeStatus = mFdtClient->FindCompatibleNode (
> + mFdtClient,
> + "cfi-flash",
> + &Node
> + );
> + !EFI_ERROR (FindNodeStatus) &&
> + (mNorFlashDeviceCount < MAX_FLASH_DEVICES);
> + FindNodeStatus = mFdtClient->FindNextCompatibleNode (
> + mFdtClient,
> + "cfi-flash",
> + Node,
> + &Node
> + )) {
> + Status = mFdtClient->GetNodeProperty (
> + mFdtClient,
> + Node,
> + "label",
> + (CONST VOID **)&Label,
> + &LabelLen
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: GetNodeProperty ('label') failed (Status == %r)\n",
> + __FUNCTION__,
> + Status
> + ));
> + } else if (AsciiStrCmp (Label, LABEL_UEFI_VAR_STORE) == 0) {
> + UefiVarStoreIndex = mNorFlashDeviceCount;
> + mUefiVarStoreNode = Node;
> + }
> +
> + Status = mFdtClient->GetNodeProperty (
> + mFdtClient,
> + Node,
> + "reg",
> + (CONST VOID **)&Reg,
> + &PropSize
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n",
> + __FUNCTION__, Status));
> + continue;
> + }
> +
> + ASSERT ((PropSize % (4 * sizeof (UINT32))) == 0);
> +
> + while ((PropSize >= (4 * sizeof (UINT32))) &&
> + (mNorFlashDeviceCount < MAX_FLASH_DEVICES)) {
> + Base = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
> + Size = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
> + Reg += 4;
> +
> + PropSize -= 4 * sizeof (UINT32);
> +
> + //
> + // Disregard any flash devices that overlap with the primary FV.
> + // The firmware is not updatable from inside the guest anyway.
> + //
> + if ((PcdGet64 (PcdFvBaseAddress) + PcdGet32 (PcdFvSize) > Base) &&
> + (Base + Size) > PcdGet64 (PcdFvBaseAddress)) {
> + continue;
> + }
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "NOR%d : Base = 0x%lx, Size = 0x%lx\n",
> + mNorFlashDeviceCount,
> + Base,
> + Size
> + ));
> +
> + mNorFlashDevices[mNorFlashDeviceCount].DeviceBaseAddress = (UINTN)Base;
> + mNorFlashDevices[mNorFlashDeviceCount].RegionBaseAddress = (UINTN)Base;
> + mNorFlashDevices[mNorFlashDeviceCount].Size = (UINTN)Size;
> + mNorFlashDevices[mNorFlashDeviceCount].BlockSize = KVMTOOL_NOR_BLOCK_SIZE;
> + mNorFlashDeviceCount++;
> + }
> + } // for
> +
> + // Setup the variable store in the last device
> + if (mNorFlashDeviceCount > 0) {
> + if (UefiVarStoreIndex == MAX_UINTN) {
> + // We did not find a label matching the UEFI Variable store. Default to
> + // using the last cfi-flash device as the variable store.
> + UefiVarStoreIndex = mNorFlashDeviceCount - 1;
> + mUefiVarStoreNode = Node;
> + }
> + if (mNorFlashDevices[UefiVarStoreIndex].DeviceBaseAddress != 0) {
> + return SetupVariableStore (&mNorFlashDevices[UefiVarStoreIndex]);
> + }
> + }
> +
> + return EFI_NOT_FOUND;
> +}
> +
> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..a3230e4b2be668904322103825b93e867503984e
> --- /dev/null
> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> @@ -0,0 +1,49 @@
> +#/** @file
> +#
> +# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = NorFlashKvmtoolLib
> + FILE_GUID = E75F07A1-B160-4893-BDD4-09E32FF847DC
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = NorFlashPlatformLib
> + CONSTRUCTOR = NorFlashPlatformLibConstructor
> +
> +[Sources.common]
> + NorFlashKvmtool.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + ArmPlatformPkg/ArmPlatformPkg.dec
> + ArmVirtPkg/ArmVirtPkg.dec
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> + PcdLib
> + UefiBootServicesTableLib
> +
> +[Protocols]
> + gFdtClientProtocolGuid ## CONSUMES
> +
> +[Pcd]
> + gArmTokenSpaceGuid.PcdFvBaseAddress
> + gArmTokenSpaceGuid.PcdFvSize
> +
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
> +
> +[Depex]
> + gFdtClientProtocolGuid
> +
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [edk2-devel] [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-06-25 11:19 ` [edk2-devel] " Ard Biesheuvel
@ 2020-06-25 11:41 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 38+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-25 11:41 UTC (permalink / raw)
To: Ard Biesheuvel, devel, Sami Mujawar
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/25/20 1:19 PM, Ard Biesheuvel wrote:
> On 6/25/20 10:45 AM, Philippe Mathieu-Daudé via groups.io wrote:
>> Hi Sami,
>>
>> On 6/24/20 3:34 PM, Sami Mujawar wrote:
>>> Kvmtool places the base address of the CFI flash in
>>> the device tree it passes to UEFI. This library
>>> parses the kvmtool device tree to read the CFI base
>>> address and initialise the PCDs use by the NOR flash
>>> driver and the variable storage.
>>>
>>> UEFI takes ownership of the CFI flash hardware, and
>>> exposes its functionality through the UEFI Runtime
>>> Variable Service. Therefore, disable the device tree
>>> node for the CFI flash used for storing the UEFI
>>> variables, to prevent the OS from attaching its device
>>> driver as well.
>>>
>>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>>> Acked-by: Laszlo Ersek <lersek@redhat.com>
>>> ---
>>>
>>> Notes:
>>> v3:
>>> - ASSERT is sufficient to test Locating [Ard]
>>> gFdtClientProtocolGuid as DEPEX ensures that this is
>>> guaranteed to succeed.
>>> - Removed additional error handling based on review
>>> [Sami]
>>> feedback.
>>> - Fix confusion caused by use of macro MAX_FLASH_BANKS.
>>> [Philippe]
>>> - Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES.
>>> [Sami]
>>> - Use macro to define block size for flash.
>>> [Philippe]
>>> - Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured
>>> [Sami]
>>> to reflect the correct block size 64KB.
>>> - Disable the DT flash node used for UEFI variable storage
>>> [Sami]
>>> as UEFI takes ownership of the flash device.
>>> Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
>>> v2:
>>> - Library to read CFI flash base address from DT and
>>> initialise [Sami]
>>> PCDs used for NOR flash variables.
>>>
>>> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330
>>> ++++++++++++++++++++
>>> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
>>> 2 files changed, 379 insertions(+)
>>>
>>> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
>>> b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
>>> new file mode 100644
>>> index
>>> 0000000000000000000000000000000000000000..8e9dcf31691b4b12b9c7bac1ad4ba8d3a534a1d8
>>>
>>> --- /dev/null
>>> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
>>> @@ -0,0 +1,330 @@
>>> +/** @file
>>> + An instance of the NorFlashPlatformLib for Kvmtool platform.
>>> +
>>> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
>>> +
>>> + SPDX-License-Identifier: BSD-2-Clause-Patent
>>> +
>>> + **/
>>> +
>>> +#include <Library/BaseLib.h>
>>> +#include <Library/DebugLib.h>
>>> +#include <Library/NorFlashPlatformLib.h>
>>> +#include <Library/UefiBootServicesTableLib.h>
>>> +#include <Protocol/FdtClient.h>
>>> +
>>> +/** Macro defining the NOR block size configured in Kvmtool.
>>> +*/
>>> +#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
>>> +
>>> +/** Macro defining the maximum number of Flash devices.
>>> +*/
>>> +#define MAX_FLASH_DEVICES 4
>>
>> I am sorry but I am still confused...
>>
>> This is about the QEMU Virt machine, right?
>>
>> This machine was supposed to have 1 single flash, see QEMU commit
>> f5fdcd6e58 ("hw/arm: Add 'virt' platform") from Nov 2013:
>>
>> /* Addresses and sizes of our components.
>> * 0..128MB is space for a flash device so we can run bootrom code
>> such as UEFI.
>> ...
>>
>> Due to limitations in the QEMU cfi-flash model, instead of using
>> a single flash device (with proper sector/bank protection), two
>> devices were added in QEMU commit acf82361c6 ("hw/arm/virt: Provide
>> flash devices for boot ROMs") Sep 2014:
>>
>> Add two flash devices to the virt board, so that it can be used for
>> running guests which want a bootrom image such as UEFI. We provide
>> two flash devices to make it more convenient to provide both a
>> read-only UEFI image and a read-write place to store guest-set
>> UEFI config variables. The '-bios' command line option is set up
>> to provide an image for the first of the two flash devices.
>>
>> What do you declare maximum 4 devices?
>>
>
> Kvmtool != QEMU, so whatever QEMU does is irrelevant for this series.
>
Ah, I feel relieved, thanks :)
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation
2020-06-24 13:34 ` [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation Sami Mujawar
@ 2020-06-25 11:42 ` Ard Biesheuvel
2020-06-26 9:23 ` Julien Grall
0 siblings, 1 reply; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 11:42 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd, Julien Grall
(+ Julien)
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Initialise serial port early so that the platform
> memory map can be logged.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> ---
> ArmVirtPkg/PrePi/PrePi.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/ArmVirtPkg/PrePi/PrePi.c b/ArmVirtPkg/PrePi/PrePi.c
> index 4f0c3f98bad63d0682cccd76a0a062d1fd4f46ab..5e144f4bdefb810708238097a3373f11d150bfe5 100755
> --- a/ArmVirtPkg/PrePi/PrePi.c
> +++ b/ArmVirtPkg/PrePi/PrePi.c
> @@ -1,6 +1,6 @@
> /** @file
> *
> -* Copyright (c) 2011-2014, ARM Limited. All rights reserved.
> +* Copyright (c) 2011-2020, ARM Limited. All rights reserved.
> *
> * SPDX-License-Identifier: BSD-2-Clause-Patent
> *
> @@ -60,16 +60,16 @@ PrePiMain (
> //
> InvalidateDataCacheRange((VOID *)(UINTN)PcdGet64 (PcdFdBaseAddress), PcdGet32 (PcdFdSize));
>
> - // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
> - Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
> - ASSERT_EFI_ERROR (Status);
> -
> // Initialize the Serial Port
> SerialPortInitialize ();
> CharCount = AsciiSPrint (Buffer,sizeof (Buffer),"UEFI firmware (version %s built at %a on %a)\n\r",
> (CHAR16*)PcdGetPtr(PcdFirmwareVersionString), __TIME__, __DATE__);
> SerialPortWrite ((UINT8 *) Buffer, CharCount);
>
> + // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
> + Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32 (PcdSystemMemoryUefiRegionSize));
> + ASSERT_EFI_ERROR (Status);
> +
> // Create the Stacks HOB (reserve the memory for all stacks)
> StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize);
> BuildStackHob (StacksBase, StacksSize);
>
We need to check whether this works on Xen - I don't remember whether we
use some kind of cache coherent shared memory ring there for the serial
console that only works if the MMU and caches are enabled. Julien?
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering
2020-06-24 13:34 ` [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
@ 2020-06-25 13:51 ` Ard Biesheuvel
2020-06-26 13:22 ` Laszlo Ersek
0 siblings, 1 reply; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 13:51 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, jian.j.wang, hao.a.wu, Alexandru.Elisei,
Andre.Przywara, Matteo.Carlini, Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> The BaseSerialPortLib16550 library does not implement
> a constructor. This prevents the correct constructor
> invocation order for dependent libraries.
> e.g. A PlatformHookLib (for the Serial Port) may have
> a dependency on retrieving data from a Hob. A Hob
> library implementation may configure its initial state
> in the HobLib constructor. Since BaseSerialPortLib16550
> does not implement a constructor, the Basetools do not
> resolve the correct order for constructor invocation.
>
> To fix this, add an empty constructor to the serial port
> library BaseSerialPortLib16550.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Note to maintainers:
this works around a long standing BaseTools bug where constructor
dependencies do not propagate through a library that lacks a constructor.
For instance, in the following case
LibA depends on LibB depends on LibC
the constructors are *only* guaranteed to be invoked in the correct
order (LibC, then LibB, then LibA) if LibB has a constructor in the
first place, otherwise, the remaining constructors for LibA and LibC
could be emitted in any order.
> ---
> MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c | 17 +++++++++++++++++
> MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf | 3 +++
> 2 files changed, 20 insertions(+)
>
> diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
> index 9cb50dd80d5634ab2aa6d68bf5ca7fb891463eef..0fd1382ee83c9de09d8250830bd9569056fcee2f 100644
> --- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
> +++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
> @@ -4,6 +4,7 @@
> (C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
> Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> Copyright (c) 2018, AMD Incorporated. All rights reserved.<BR>
> + Copyright (c) 2020, ARM Limited. All rights reserved.
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -1102,3 +1103,19 @@ SerialPortSetAttributes (
> return RETURN_SUCCESS;
> }
>
> +/** Base Serial Port 16550 Library Constructor
> +
> + @retval RETURN_SUCCESS Success.
> +*/
> +EFI_STATUS
> +EFIAPI
> +BaseSerialPortLib16550 (
> + VOID
> + )
> +{
> + // Nothing to do here. This constructor is added to
> + // enable the chain of constructor invocation for
> + // dependent libraries.
> + return RETURN_SUCCESS;
> +}
> +
> diff --git a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> index 8b4ae3f1d4ee1e2e9a8b81eab4c900541ce8cfb6..92b7a8b7896a305d2ce22589f8a9593618d37bb7 100644
> --- a/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> +++ b/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> @@ -2,6 +2,8 @@
> # SerialPortLib instance for 16550 UART.
> #
> # Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2020, ARM Limited. All rights reserved.
> +#
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> ##
> @@ -14,6 +16,7 @@ [Defines]
> MODULE_TYPE = BASE
> VERSION_STRING = 1.1
> LIBRARY_CLASS = SerialPortLib
> + CONSTRUCTOR = BaseSerialPortLib16550
>
> [Packages]
> MdePkg/MdePkg.dec
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address
2020-06-24 13:34 ` [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
@ 2020-06-25 13:52 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 13:52 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Introduce a new GUID Hob gEarly16550UartBaseAddressGuid
> to cache the base address of the 16550 UART, for when
> PCD access is not available.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> ArmVirtPkg/ArmVirtPkg.dec | 2 ++
> ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h | 22 ++++++++++++++++++++
> 2 files changed, 24 insertions(+)
>
> diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
> index 08ddd68a863eb82778fa7a92b20ac1bff271f5e5..bf82f7f1f3f2a0ce545d87fa93350f56de78328b 100644
> --- a/ArmVirtPkg/ArmVirtPkg.dec
> +++ b/ArmVirtPkg/ArmVirtPkg.dec
> @@ -1,6 +1,7 @@
> #/** @file
> #
> # Copyright (c) 2014, Linaro Limited. All rights reserved.
> +# Copyright (c) 2020, ARM Limited. All rights reserved.
> #
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> #
> @@ -30,6 +31,7 @@ [LibraryClasses]
> [Guids.common]
> gArmVirtTokenSpaceGuid = { 0x0B6F5CA7, 0x4F53, 0x445A, { 0xB7, 0x6E, 0x2E, 0x36, 0x5B, 0x80, 0x63, 0x66 } }
> gEarlyPL011BaseAddressGuid = { 0xB199DEA9, 0xFD5C, 0x4A84, { 0x80, 0x82, 0x2F, 0x41, 0x70, 0x78, 0x03, 0x05 } }
> + gEarly16550UartBaseAddressGuid = { 0xea67ca3e, 0x1f54, 0x436b, { 0x97, 0x88, 0xd4, 0xeb, 0x29, 0xc3, 0x42, 0x67 } }
>
> gArmVirtVariableGuid = { 0x50bea1e5, 0xa2c5, 0x46e9, { 0x9b, 0x3a, 0x59, 0x59, 0x65, 0x16, 0xb0, 0x0a } }
>
> diff --git a/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h b/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
> new file mode 100644
> index 0000000000000000000000000000000000000000..6b76f37a27dac03d6749f31a03e8026023231056
> --- /dev/null
> +++ b/ArmVirtPkg/Include/Guid/Early16550UartBaseAddress.h
> @@ -0,0 +1,22 @@
> +/** @file
> + GUID for the HOB that caches the base address of the 16550 serial port, for
> + when PCD access is not available.
> +
> + Copyright (c) 2020, ARM Limited. All rights reserved.
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef EARLY_16550_UART_BASE_ADDRESS_H__
> +#define EARLY_16550_UART_BASE_ADDRESS_H__
> +
> +#define EARLY_16550_UART_BASE_ADDRESS_GUID { \
> + 0xea67ca3e, 0x1f54, 0x436b, { \
> + 0x97, 0x88, 0xd4, 0xeb, 0x29, 0xc3, 0x42, 0x67 \
> + } \
> + }
> +
> +extern EFI_GUID gEarly16550UartBaseAddressGuid;
> +
> +#endif // EARLY_16550_UART_BASE_ADDRESS_H__
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library
2020-06-24 13:34 ` [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
@ 2020-06-25 13:56 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 13:56 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> The BaseSerialPort16550 library invokes the
> PlatformHookSerialPortInitialize() implemented as
> part of the PlatformHook library, to perform platform
> specific initialization required to enable use of the
> 16550 device. The BaseSerialPort16550 library uses
> the PcdSerialRegisterBase to obtain the base address
> of the UART for MMIO operations.
>
> Some VMMs like Kvmtool provide the base address of
> the console serial port in the platform device tree.
>
> This patch introduces two instances of the Platform
> Hook library:
> 1. EarlyFdt16550SerialPortHookLib - parses the
> platform device tree to extract the base
> address of the 16550 UART and update the PCD
> PcdSerialRegisterBase.
> 2. Fdt16550SerialPortHookLib - reads the GUID
> Hob gEarly16550UartBaseAddressGuid (that caches
> the base address of the 16550 UART discovered
> during early stages) and updates the PCD
> PcdSerialRegisterBase.
>
> Note:
> a. The PCD PcdSerialRegisterBase is configured
> as PatchableInModule.
> b. A separate patch introduces a PlatformPeiLib
> that trampolines the 16550 UART base address
> from the Pcd PcdSerialRegisterBase to the
> GUID Hob gEarly16550UartBaseAddressGuid.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c | 138 ++++++++++++++++++++
> ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf | 36 +++++
> ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c | 57 ++++++++
> ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf | 39 ++++++
> ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni | 14 ++
> 5 files changed, 284 insertions(+)
>
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..4e97302d01dc5692e046fb901663373828b532ee
> --- /dev/null
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.c
> @@ -0,0 +1,138 @@
> +/** @file
> + Early Platform Hook Library instance for 16550 Uart.
> +
> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <Base.h>
> +#include <Uefi.h>
> +
> +#include <Pi/PiBootMode.h>
> +#include <Pi/PiHob.h>
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/HobLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/PlatformHookLib.h>
> +#include <libfdt.h>
> +
> +/** Get the UART base address of the console serial-port from the DT.
> +
> + This function fetches the node referenced in the "stdout-path"
> + property of the "chosen" node and returns the base address of
> + the console UART.
> +
> + @param [in] Fdt Pointer to a Flattened Device Tree (Fdt).
> + @param [out] SerialConsoleAddress If success, contains the base address
> + of the console serial-port.
> +
> + @retval EFI_SUCCESS The function completed successfully.
> + @retval EFI_NOT_FOUND Console serial-port info not found in DT.
> + @retval EFI_INVALID_PARAMETER Invalid parameter.
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +GetSerialConsolePortAddress (
> + IN CONST VOID *Fdt,
> + OUT UINT64 *SerialConsoleAddress
> + )
> +{
> + CONST CHAR8 *Prop;
> + INT32 PropSize;
> + CONST CHAR8 *Path;
> + INT32 PathLen;
> + INT32 ChosenNode;
> + INT32 SerialConsoleNode;
> + INT32 Len;
> + CONST CHAR8 *NodeStatus;
> + CONST UINT64 *RegProperty;
> +
> + if ((Fdt == NULL) || (fdt_check_header (Fdt) != 0)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // The "chosen" node resides at the the root of the DT. Fetch it.
> + ChosenNode = fdt_path_offset (Fdt, "/chosen");
> + if (ChosenNode < 0) {
> + return EFI_NOT_FOUND;
> + }
> +
> + Prop = fdt_getprop (Fdt, ChosenNode, "stdout-path", &PropSize);
> + if (PropSize < 0) {
> + return EFI_NOT_FOUND;
> + }
> +
> + // Determine the actual path length, as a colon terminates the path.
> + Path = ScanMem8 (Prop, ':', PropSize);
> + if (Path == NULL) {
> + PathLen = AsciiStrLen (Prop);
> + } else {
> + PathLen = Path - Prop;
> + }
> +
> + // Aliases cannot start with a '/', so it must be the actual path.
> + if (Prop[0] == '/') {
> + SerialConsoleNode = fdt_path_offset_namelen (Fdt, Prop, PathLen);
> + } else {
> + // Lookup the alias, as this contains the actual path.
> + Path = fdt_get_alias_namelen (Fdt, Prop, PathLen);
> + if (Path == NULL) {
> + return EFI_NOT_FOUND;
> + }
> + SerialConsoleNode = fdt_path_offset (Fdt, Path);
> + }
> +
> + NodeStatus = fdt_getprop (Fdt, SerialConsoleNode, "status", &Len);
> + if ((NodeStatus != NULL) && (AsciiStrCmp (NodeStatus, "okay") != 0)) {
> + return EFI_NOT_FOUND;
> + }
> +
> + RegProperty = fdt_getprop (Fdt, SerialConsoleNode, "reg", &Len);
> + if (Len != 16) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + *SerialConsoleAddress = fdt64_to_cpu (ReadUnaligned64 (RegProperty));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/** Platform hook to retrieve the 16550 UART base address from the platform
> + Device tree and store it in PcdSerialRegisterBase.
> +
> + @retval RETURN_SUCCESS Success.
> + @retval RETURN_INVALID_PARAMETER A parameter was invalid.
> + @retval RETURN_NOT_FOUND Serial port information not found.
> +
> +**/
> +RETURN_STATUS
> +EFIAPI
> +PlatformHookSerialPortInitialize (
> + VOID
> + )
> +{
> + RETURN_STATUS Status;
> + VOID *DeviceTreeBase;
> + UINT64 SerialConsoleAddress;
> +
> + if (PcdGet64 (PcdSerialRegisterBase) != 0) {
> + return RETURN_SUCCESS;
> + }
> +
> + DeviceTreeBase = (VOID *)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
> + if (DeviceTreeBase == NULL) {
> + return RETURN_NOT_FOUND;
> + }
> +
> + Status = GetSerialConsolePortAddress (DeviceTreeBase, &SerialConsoleAddress);
> + if (RETURN_ERROR (Status)) {
> + return Status;
> + }
> +
> + return (EFI_STATUS)PcdSet64S (PcdSerialRegisterBase, SerialConsoleAddress);
> +}
> +
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..007a45eca2a622118044b527a5bc6403b706608a
> --- /dev/null
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> @@ -0,0 +1,36 @@
> +## @file
> +# Early Platform Hook Library instance for 16550 Uart.
> +#
> +# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = EarlyFdt16550SerialPortHookLib
> + MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
> + FILE_GUID = FFB19961-79CC-4684-84A8-C31B0A2BBE82
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = PlatformHookLib|SEC PEI_CORE PEIM
> +
> +[Sources]
> + EarlyFdt16550SerialPortHookLib.c
> +
> +[LibraryClasses]
> + BaseLib
> + PcdLib
> + FdtLib
> + HobLib
> +
> +[Packages]
> + ArmVirtPkg/ArmVirtPkg.dec
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> +
> +[Pcd]
> + gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..1100c12aef361e39cf78f0c3e4e14cc2feecfcee
> --- /dev/null
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.c
> @@ -0,0 +1,57 @@
> +/** @file
> + Platform Hook Library instance for 16550 Uart.
> +
> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <Base.h>
> +#include <Uefi.h>
> +
> +#include <Pi/PiBootMode.h>
> +#include <Pi/PiHob.h>
> +
> +#include <Guid/Early16550UartBaseAddress.h>
> +#include <Guid/Fdt.h>
> +#include <Guid/FdtHob.h>
> +
> +#include <Library/BaseLib.h>
> +#include <Library/HobLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/PlatformHookLib.h>
> +
> +/** Platform hook to retrieve the 16550 UART base address from the GUID Hob
> + that caches the UART base address from early boot stage and store it in
> + PcdSerialRegisterBase.
> +
> + @retval RETURN_SUCCESS Success.
> + @retval RETURN_NOT_FOUND Serial Port information not found.
> +
> +**/
> +RETURN_STATUS
> +EFIAPI
> +PlatformHookSerialPortInitialize (
> + VOID
> + )
> +{
> + VOID *Hob;
> + UINT64 *UartBase;
> +
> + if (PcdGet64 (PcdSerialRegisterBase) != 0) {
> + return RETURN_SUCCESS;
> + }
> +
> + Hob = GetFirstGuidHob (&gEarly16550UartBaseAddressGuid);
> + if ((Hob == NULL) || (GET_GUID_HOB_DATA_SIZE (Hob) != sizeof (*UartBase))) {
> + return RETURN_NOT_FOUND;
> + }
> +
> + UartBase = GET_GUID_HOB_DATA (Hob);
> + if ((UINTN)*UartBase == 0) {
> + return RETURN_NOT_FOUND;
> + }
> +
> + return (RETURN_STATUS)PcdSet64S (PcdSerialRegisterBase, (UINTN)*UartBase);
> +}
> +
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..ba789ca69041b647a4a881b03110ff853df89f65
> --- /dev/null
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
> @@ -0,0 +1,39 @@
> +## @file
> +# Platform Hook Library instance for 16550 Uart.
> +#
> +# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = Fdt16550SerialPortHookLib
> + MODULE_UNI_FILE = Fdt16550SerialPortHookLib.uni
> + FILE_GUID = C6DFD3F0-179D-4376-89A5-F641A2E7EFB5
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = PlatformHookLib|DXE_CORE DXE_DRIVER UEFI_DRIVER DXE_RUNTIME_DRIVER UEFI_APPLICATION
> + CONSTRUCTOR = PlatformHookSerialPortInitialize
> +
> +[Sources]
> + Fdt16550SerialPortHookLib.c
> +
> +[LibraryClasses]
> + BaseLib
> + PcdLib
> + HobLib
> +
> +[Packages]
> + ArmVirtPkg/ArmVirtPkg.dec
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> +
> +[Pcd]
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
> +
> +[Guids]
> + gEarly16550UartBaseAddressGuid
> +
> diff --git a/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
> new file mode 100644
> index 0000000000000000000000000000000000000000..19a61a4a03244321bda7c88cd26128b44bfd46b4
> --- /dev/null
> +++ b/ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.uni
> @@ -0,0 +1,14 @@
> +// /** @file
> +// Platform Hook Library instance for 16550 Uart.
> +//
> +//
> +// Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +//
> +// SPDX-License-Identifier: BSD-2-Clause-Patent
> +//
> +// **/
> +
> +#string STR_MODULE_ABSTRACT #language en-US "Platform Hook Library instance for 16550 Uart."
> +
> +#string STR_MODULE_DESCRIPTION #language en-US "Platform Hook Library instance for 16550 Uart."
> +
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib
2020-06-24 13:34 ` [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
@ 2020-06-25 14:05 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 14:05 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> The PlatformPeim() in the PlatformPeiLib is invoked
> by the PrePiMain() and provides the platform an
> opportunity to setup the plaform specific HOBs.
>
> This PlatfromPeiLib initialises the Kvmtool platform
> HOBs like the Fdt, 16550BaseAddress, etc.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c | 78 ++++++++++++++++++++
> ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf | 48 ++++++++++++
> 2 files changed, 126 insertions(+)
>
> diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..a97b31537fbc8071eed030f912ade60de3945356
> --- /dev/null
> +++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.c
> @@ -0,0 +1,78 @@
> +/** @file
> +*
> +* Copyright (c) 2020, ARM Limited. All rights reserved.
> +*
> +* SPDX-License-Identifier: BSD-2-Clause-Patent
> +*
> +**/
> +
> +#include <PiPei.h>
> +
> +#include <Guid/Early16550UartBaseAddress.h>
> +#include <Guid/FdtHob.h>
> +
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/HobLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/PeiServicesLib.h>
> +#include <libfdt.h>
> +
> +/** Initialise Platform HOBs
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_OUT_OF_RESOURCES Out of resources.
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformPeim (
> + VOID
> + )
> +{
> + VOID *Base;
> + VOID *NewBase;
> + UINTN FdtSize;
> + UINTN FdtPages;
> + UINT64 *FdtHobData;
> + UINT64 *UartHobData;
> +
> + Base = (VOID*)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
> + if ((Base == NULL) || (fdt_check_header (Base) != 0)) {
> + ASSERT (0);
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + FdtSize = fdt_totalsize (Base) + PcdGet32 (PcdDeviceTreeAllocationPadding);
> + FdtPages = EFI_SIZE_TO_PAGES (FdtSize);
> + NewBase = AllocatePages (FdtPages);
> + if (NewBase == NULL) {
> + ASSERT (0);
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + fdt_open_into (Base, NewBase, EFI_PAGES_TO_SIZE (FdtPages));
> +
> + FdtHobData = BuildGuidHob (&gFdtHobGuid, sizeof (*FdtHobData));
> + if (FdtHobData == NULL) {
> + ASSERT (0);
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + *FdtHobData = (UINTN)NewBase;
> +
> + UartHobData = BuildGuidHob (
> + &gEarly16550UartBaseAddressGuid,
> + sizeof (*UartHobData)
> + );
> + if (UartHobData == NULL) {
> + ASSERT (0);
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + *UartHobData = PcdGet64 (PcdSerialRegisterBase);
> +
> + BuildFvHob (PcdGet64 (PcdFvBaseAddress), PcdGet32 (PcdFvSize));
> +
> + return EFI_SUCCESS;
> +}
> diff --git a/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..9f44b8885d3c131de1d41ac6947bd9218cfdf3e7
> --- /dev/null
> +++ b/ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> @@ -0,0 +1,48 @@
> +#/** @file
> +#
> +# Copyright (c) 2020, ARM Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = PlatformPeiLib
> + FILE_GUID = 21073FB3-BA6F-43EB-83F0-4A840C648165
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = KvmtoolPlatformPeiLib
> +
> +[Sources]
> + KvmtoolPlatformPeiLib.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + ArmVirtPkg/ArmVirtPkg.dec
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + DebugLib
> + HobLib
> + FdtLib
> + PcdLib
> + PeiServicesLib
> +
> +[FixedPcd]
> + gArmTokenSpaceGuid.PcdFvSize
> + gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
> +
> +[Pcd]
> + gArmTokenSpaceGuid.PcdFvBaseAddress
> + gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
> +
> +[Guids]
> + gFdtHobGuid
> + gEarly16550UartBaseAddressGuid
> +
> +[Depex]
> + gEfiPeiMemoryDiscoveredPpiGuid
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform
2020-06-24 13:34 ` [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform Sami Mujawar
@ 2020-06-25 14:08 ` Ard Biesheuvel
2020-06-26 13:26 ` Laszlo Ersek
0 siblings, 1 reply; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 14:08 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool is a virtual machine manager that enables hosting
> KVM guests. Kvmtool emulates certain devices like serial
> port, RTC, etc. essentially providing a virtual platform.
>
> This patch adds support for kvmtool virtual platform.
>
> Following is a brief description of the firmware
> implementation choices:
>
> - Serial Port: 16550 UART
> On some platforms the 16550 UART is interfaced using
> PCI. Therefore, the 16550 Serial port library is
> dependent on the PCI library. The 16550 UART driver
> checks the Device ID represented using the PCD
> gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
> to determine if the UART is behind PCI.
> If the Device ID is 0xFF then the serial 16550 UART
> is not behind PCI.
>
> On Kvmtool the Serial 16550 UART is not behind PCI,
> and therefore a combination of BasePciLibPciExpress
> and BasePciExpressLib is used to satisfy the PCI
> library dependency.
>
> The PcdSerialPciDeviceInfo is also set to 0xFF to
> indicate that the Serial 16550 UART is not behind
> PCI. The PCD PcdSerialUseMmio is also set to TRUE
> to indicate MMIO accesses are required for the
> UART registers.
>
> Additionally two instances of PlatformHookLibs are
> provided EarlyFdt16550SerialPortHookLib and
> Fdt16550SerialPortHookLib to patch the
> PcdSerialRegisterBase so that BaseSerialPortLib16550
> and retrieve the base address of the 16550 UART.
>
> - Dependency order for Flash
> FaultTolerantWriteDxe makes use of PCDs (e.g.
> PcdFlashNvStorageFtwSpareBase64 etc.), which in
> case of kvmtool will be evaluated based on the CFI
> flash base address read from the DT. These variables
> are populated in the NorFlashPlatformLib loaded by
> ArmVeNorFlashDxe.
>
> This results in a dependency issue with
> FaultTolerantWriteDxe. To resolve this make the
> NorFlashPlatformLib as a library dependency for
> FaultTolerantWriteDxe.
>
> - RTC Controller
> A separate patch updates the MC146818 RTC controller
> driver to support MMIO accesses.
> A KvmtoolRtcFdtClientLib has been introduced to
> extract the base addresses of the RTC controller
> from the platform device tree and map the RTC
> register space as Runtime Memory.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> v3:
> - Use correct terminology. kvmtool is *not* an emulator. [Ard]
> - Updated patch series to reflect correct terminology. [Sami]
> - Don't define bits and pieces you cannot make use of. [Ard]
> - Updated workspace to remove unsupported features. [Sami]
> Ref: https://edk2.groups.io/g/devel/topic/74200917#59552
>
> v2:
> - Updates to reflect review comments and support [Sami]
> for latest features emulated by kvmtool e.g. CFI.
>
> v1:
> - Add support for Kvmtool emulated platform [Sami]
> - Add more justification for platform and [Laszlo]
> document platform maintainer.
> Ref: https://edk2.groups.io/g/devel/topic/30915279#30693
>
> ArmVirtPkg/ArmVirtKvmTool.dsc | 345 ++++++++++++++++++++
> ArmVirtPkg/ArmVirtKvmTool.fdf | 259 +++++++++++++++
> 2 files changed, 604 insertions(+)
>
> diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
> new file mode 100644
> index 0000000000000000000000000000000000000000..76e158eaea4be089de65f0f908f8623840681e0e
> --- /dev/null
> +++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
> @@ -0,0 +1,345 @@
> +# @file
> +# Workspace file for KVMTool virtual platform.
> +#
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#
> +
> +################################################################################
> +#
> +# Defines Section - statements that will be processed to create a Makefile.
> +#
> +################################################################################
> +[Defines]
> + PLATFORM_NAME = ArmVirtKvmTool
> + PLATFORM_GUID = 4CB2C61E-FA32-4130-8E37-54ABC71A1A43
> + PLATFORM_VERSION = 0.1
> + DSC_SPECIFICATION = 0x0001001B
> +!ifdef $(EDK2_OUT_DIR)
> + OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
> +!else
> + OUTPUT_DIRECTORY = Build/ArmVirtKvmTool-$(ARCH)
> +!endif
> + SUPPORTED_ARCHITECTURES = AARCH64|ARM
> + BUILD_TARGETS = DEBUG|RELEASE
> + SKUID_IDENTIFIER = DEFAULT
> + FLASH_DEFINITION = ArmVirtPkg/ArmVirtKvmTool.fdf
> +
> + #
> + # Defines for default states. These can be changed on the command line.
> + # -D FLAG=VALUE
> + #
> + DEFINE ENABLE_NETWORK = FALSE
> +
> +!include ArmVirtPkg/ArmVirt.dsc.inc
> +
> +[LibraryClasses.common]
> + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> + ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
> +
> + # Virtio Support
> + VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
> + VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
> +
> + ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf
> + ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
> +
> + TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
> + NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> +
> + CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
> +
> + # BDS Libraries
> + UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
> + PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
> + BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
> +
> + CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
> + FrameBufferBltLib|MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
> +
> + FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
> +
> + PciPcdProducerLib|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
> + PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
> + PciHostBridgeLib|ArmVirtPkg/Library/FdtPciHostBridgeLib/FdtPciHostBridgeLib.inf
> +
> + TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
> + AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
> +
> + PlatformPeiLib|ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
> +
> + PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
> + PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
> + SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> +
> +[LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE, LibraryClasses.common.PEIM]
> + PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
> + PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
> + SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
> +
> +[LibraryClasses.common.UEFI_DRIVER]
> + UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
> +
> +[BuildOptions]
> + *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
> + #
> + # We need to avoid jump tables in SEC modules, so that the PE/COFF
> + # self-relocation code itself is guaranteed to be position independent.
> + #
> + GCC:*_*_*_CC_FLAGS = -fno-jump-tables
I know I suggested this, but I realized we can use XIPFLAGS here, as SEC
and BASE are the only modules affected by this
GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
> +
> +################################################################################
> +#
> +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> +#
> +################################################################################
> +
> +[PcdsFeatureFlag.common]
> + ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
> + # It could be set FALSE to save size.
> + gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
> + gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
> +
> + # Use MMIO for accessing RTC controller registers.
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|TRUE
> +
> +[PcdsFixedAtBuild.common]
> + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
> +
> + gArmPlatformTokenSpaceGuid.PcdCoreCount|1
> +
> +!if $(ARCH) == AARCH64
> + gArmTokenSpaceGuid.PcdVFPEnabled|1
> +!endif
> +
> + gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
> +
> + # Size of the region used by UEFI in permanent memory (Reserved 64MB)
> + gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
> +
> + #
> + # TTY Terminal Type
> + # 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
> + gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
> +
> + #
> + # ARM Virtual Architectural Timer -- fetch frequency from KVM
> + #
> + gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
> +
> + # Use MMIO for accessing Serial port registers.
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}
> +
> + gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
> + gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
> +
> + #
> + # The maximum physical I/O addressability of the processor, set with
> + # BuildCpuHob().
> + #
> + gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
> +
> +[PcdsPatchableInModule.common]
> + #
> + # This will be overridden in the code
> + #
> + gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
> + gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
> +
> + #
> + # The device tree base address is handed off by kvmtool.
> + # We are booting from RAM using the Linux kernel boot protocol,
> + # x0 will point to the DTB image in memory.
> + #
> + gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
> +
> + gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
> + gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
> +
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0
> +
> +[PcdsDynamicDefault.common]
> + gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
> +
> + gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
> + gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
> + gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
> + gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
> +
> + #
> + # ARM General Interrupt Controller
> + #
> + gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
> + gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
> + gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
> +
> + #
> + # Set video resolution for boot options and for text setup.
> + # PlatformDxe can set the former at runtime.
> + #
> + gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
> + gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
> +
> + ## Force DTB
> + gArmVirtTokenSpaceGuid.PcdForceNoAcpi|TRUE
> +
> + # Setup Flash storage variables
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x40000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x40000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x40000
> +
> + ## RTC Register address in MMIO space.
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0
> + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0
> +
> +################################################################################
> +#
> +# Components Section - list of all EDK II Modules needed by this Platform
> +#
> +################################################################################
> +[Components.common]
> + #
> + # PEI Phase modules
> + #
> + ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf {
> + <LibraryClasses>
> + ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> + LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
> + PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
> + HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
> + PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
> + MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
> + }
> +
> + #
> + # DXE
> + #
> + MdeModulePkg/Core/Dxe/DxeMain.inf {
> + <LibraryClasses>
> + NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
> + DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
> + }
> + MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
> + <LibraryClasses>
> + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> + }
> +
> + #
> + # Architectural Protocols
> + #
> + ArmPkg/Drivers/CpuDxe/CpuDxe.inf
> + MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
> + MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
> + <LibraryClasses>
> + NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
> + NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
> + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> + }
> +
> + MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> + MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> + MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf {
> + <LibraryClasses>
> + NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> + }
> +
> + MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
> + MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> + MdeModulePkg/Universal/Metronome/Metronome.inf
> + PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf {
> + <LibraryClasses>
> + NULL|ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
> + }
> +
> + MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> + MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> + MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
> + MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
> + MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
> +
> + MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
> +
> + ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
> + ArmPkg/Drivers/TimerDxe/TimerDxe.inf {
> + <LibraryClasses>
> + NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
> + }
> +
> + ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
> +
> + MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
> +
> + #
> + # Platform Driver
> + #
> + ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
> + ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
> + ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
> + ArmVirtPkg/HighMemDxe/HighMemDxe.inf
> + OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
> + OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
> + OvmfPkg/VirtioNetDxe/VirtioNet.inf
> + OvmfPkg/VirtioRngDxe/VirtioRng.inf
> +
> + #
> + # FAT filesystem + GPT/MBR partitioning + UDF filesystem
> + #
> + MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
> + MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
> + MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
> + FatPkg/EnhancedFatDxe/Fat.inf
> + MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
> +
> + #
> + # Bds
> + #
> + MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf {
> + <LibraryClasses>
> + DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
> + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> + }
> + MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
> + MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
> + MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
> + MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
> + MdeModulePkg/Logo/LogoDxe.inf
> + MdeModulePkg/Application/UiApp/UiApp.inf {
> + <LibraryClasses>
> + NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
> + NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
> + NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
> + }
> +
> +!if $(ENABLE_NETWORK) == TRUE
> + #
> + # Networking stack
> + #
> + NetworkPkg/SnpDxe/SnpDxe.inf
I think we have special .inc files in NetworkPkg now for this, no?
> + NetworkPkg/DpcDxe/DpcDxe.inf
> + NetworkPkg/ArpDxe/ArpDxe.inf
> + NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
> + NetworkPkg/Ip4Dxe/Ip4Dxe.inf
> + NetworkPkg/MnpDxe/MnpDxe.inf
> + NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
> + NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
> + NetworkPkg/Udp4Dxe/Udp4Dxe.inf
> + NetworkPkg/TcpDxe/TcpDxe.inf
> + NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
> + NetworkPkg/IScsiDxe/IScsiDxe.inf
> +!endif
> +
> + #
> + # SCSI Bus and Disk Driver
> + #
> + MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
> + MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
> diff --git a/ArmVirtPkg/ArmVirtKvmTool.fdf b/ArmVirtPkg/ArmVirtKvmTool.fdf
> new file mode 100644
> index 0000000000000000000000000000000000000000..9c70b315cc787bba6db747298a600d65759b4188
> --- /dev/null
> +++ b/ArmVirtPkg/ArmVirtKvmTool.fdf
> @@ -0,0 +1,259 @@
> +#
> +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#
> +
> +################################################################################
> +#
> +# FD Section
> +# The [FD] Section is made up of the definition statements and a
> +# description of what goes into the Flash Device Image. Each FD section
> +# defines one flash "device" image. A flash device image may be one of
> +# the following: Removable media bootable image (like a boot floppy
> +# image,) an Option ROM image (that would be "flashed" into an add-in
> +# card,) a System "Flash" image (that would be burned into a system's
> +# flash) or an Update ("Capsule") image that will be used to update and
> +# existing system flash.
> +#
> +################################################################################
> +
> +[FD.KVMTOOL_EFI]
> +BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
> +# The size in bytes of the FLASH Device
> +Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
> +ErasePolarity = 1
> +
> +# This one is tricky, it must be: BlockSize * NumBlocks = Size
> +BlockSize = 0x00001000
> +NumBlocks = 0x200
> +
> +################################################################################
> +#
> +# Following are lists of FD Region layout which correspond to the locations of different
> +# images within the flash device.
> +#
> +# Regions must be defined in ascending order and may not overlap.
> +#
> +# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
> +# the pipe "|" character, followed by the size of the region, also in hex with the leading
> +# "0x" characters. Like:
> +# Offset|Size
> +# PcdOffsetCName|PcdSizeCName
> +# RegionType <FV, DATA, or FILE>
> +#
> +################################################################################
> +
> +#
> +# Implement the Linux kernel header layout so that the loader will identify
> +# it as something bootable, and execute it with a FDT pointer in x0 or r2.
> +# This area will be reused to store a copy of the FDT so round it up to 32 KB.
> +#
> +0x00000000|0x00008000
> +DATA = {
> +!if $(ARCH) == AARCH64
> + 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
> + 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
> + 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
> + 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
> + 0x41, 0x52, 0x4d, 0x64, # magic: "ARM\x64"
> + 0x00, 0x00, 0x00, 0x00 # res5
> +!else
> + 0x08, 0x10, 0x4f, 0xe2, # adr r1, .
> + 0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
> + 0x00, 0x00, 0xa0, 0xe1, # nop
> + 0x00, 0x00, 0xa0, 0xe1, # nop
> + 0x00, 0x00, 0xa0, 0xe1, # nop
> + 0x00, 0x00, 0xa0, 0xe1, # nop
> + 0x00, 0x00, 0xa0, 0xe1, # nop
> + 0x00, 0x00, 0xa0, 0xe1, # nop
> +
> + 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
> + 0x18, 0x28, 0x6f, 0x01, # magic
> + 0x00, 0x00, 0x00, 0x00, # start
> + 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
> + 0x01, 0x02, 0x03, 0x04 # endiannness flag
> +!endif
> +}
> +
> +0x00008000|0x001f8000
> +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> +FV = FVMAIN_COMPACT
> +
> +################################################################################
> +#
> +# FV Section
> +#
> +# [FV] section is used to define what components or modules are placed within a flash
> +# device file. This section also defines order the components and modules are positioned
> +# within the image. The [FV] section consists of define statements, set statements and
> +# module statements.
> +#
> +################################################################################
> +
> +[FV.FvMain]
> +FvNameGuid = 8A91C08E-7D9D-4933-84D6-901D26D0766E
> +BlockSize = 0x40
> +NumBlocks = 0 # This FV gets compressed so make it just big enough
> +FvAlignment = 16 # FV alignment and FV attributes setting.
> +ERASE_POLARITY = 1
> +MEMORY_MAPPED = TRUE
> +STICKY_WRITE = TRUE
> +LOCK_CAP = TRUE
> +LOCK_STATUS = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP = TRUE
> +WRITE_STATUS = TRUE
> +WRITE_LOCK_CAP = TRUE
> +WRITE_LOCK_STATUS = TRUE
> +READ_DISABLED_CAP = TRUE
> +READ_ENABLED_CAP = TRUE
> +READ_STATUS = TRUE
> +READ_LOCK_CAP = TRUE
> +READ_LOCK_STATUS = TRUE
> +
> + INF MdeModulePkg/Core/Dxe/DxeMain.inf
> + INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
> + INF ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
> + INF ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
> + INF ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
> + INF ArmVirtPkg/HighMemDxe/HighMemDxe.inf
> +
> + #
> + # PI DXE Drivers producing Architectural Protocols (EFI Services)
> + #
> + INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
> + INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
> + INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> + INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> + INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
> + INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
> +
> + INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
> + INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> +
> + INF MdeModulePkg/Universal/Metronome/Metronome.inf
> + INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
> +
> + INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
> +
> + #
> + # Multiple Console IO support
> + #
> + INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> + INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> + INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
> + INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
> + INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
> +
> + INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
> + INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
> + INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
> + INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
> +
> + #
> + # FAT filesystem + GPT/MBR partitioning + UDF filesystem
> + #
> + INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
> + INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
> + INF FatPkg/EnhancedFatDxe/Fat.inf
> + INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
> + INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
> +
> + #
> + # Platform Driver
> + #
> + INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
> + INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
> + INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
> + INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
> +
> + #
> + # UEFI application (Shell Embedded Boot Loader)
> + #
> + INF ShellPkg/Application/Shell/Shell.inf
> + INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
> +
> + #
> + # Bds
> + #
> + INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
> + INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
> + INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
> + INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
> + INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
> + INF MdeModulePkg/Application/UiApp/UiApp.inf
> +
> +!if $(ENABLE_NETWORK) == TRUE
> + #
> + # Networking stack
> + #
> + INF NetworkPkg/SnpDxe/SnpDxe.inf
> + INF NetworkPkg/DpcDxe/DpcDxe.inf
> + INF NetworkPkg/ArpDxe/ArpDxe.inf
> + INF NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
> + INF NetworkPkg/Ip4Dxe/Ip4Dxe.inf
> + INF NetworkPkg/MnpDxe/MnpDxe.inf
> + INF NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
> + INF NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
> + INF NetworkPkg/Udp4Dxe/Udp4Dxe.inf
> + INF NetworkPkg/TcpDxe/TcpDxe.inf
> + INF NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
> + INF NetworkPkg/IScsiDxe/IScsiDxe.inf
> +!endif
> +
> + #
> + # SCSI Bus and Disk Driver
> + #
> + INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
> + INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
> +
> +!if $(ARCH) == AARCH64
> + #
> + # EBC support
> + #
> + INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
> +!endif
> +
> + #
> + # TianoCore logo (splash screen)
> + #
> + INF MdeModulePkg/Logo/LogoDxe.inf
> +
> + #
> + # Ramdisk support
> + #
> + INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf
> +
> +[FV.FVMAIN_COMPACT]
> +FvAlignment = 16
> +ERASE_POLARITY = 1
> +MEMORY_MAPPED = TRUE
> +STICKY_WRITE = TRUE
> +LOCK_CAP = TRUE
> +LOCK_STATUS = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP = TRUE
> +WRITE_STATUS = TRUE
> +WRITE_LOCK_CAP = TRUE
> +WRITE_LOCK_STATUS = TRUE
> +READ_DISABLED_CAP = TRUE
> +READ_ENABLED_CAP = TRUE
> +READ_STATUS = TRUE
> +READ_LOCK_CAP = TRUE
> +READ_LOCK_STATUS = TRUE
> +
> + INF RuleOverride = SELF_RELOC ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
> +
> + FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
> + SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
> + SECTION FV_IMAGE = FVMAIN
> + }
> + }
> +
> +!include ArmVirtRules.fdf.inc
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC
2020-06-24 13:34 ` [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
@ 2020-06-25 14:08 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 14:08 UTC (permalink / raw)
To: Sami Mujawar, devel; +Cc: leif, lersek, Matteo.Carlini, Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool emulates a MC146818 RTC controller in the
> MMIO space. To support this the MC146818 RTC driver
> PcatRealTimeClockRuntimeDxe has been updated to
> support MMIO accesses. PCDs for RTC Index and
> Target register base addresses in the MMIO space
> have been introduced. The KvmtoolRtcFdtClientLib
> reads the MC146818 RTC MMIO base address region
> from the Kvmtool device tree and updates the
> Index and Target register PCDs.
>
> As these PCDs are defined in PcAtChipsetPkg.dec,
> this patch updates the CI script to add this
> dependency.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Not sure what this does, but it looks ok to me
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/ArmVirtPkg/ArmVirtPkg.ci.yaml b/ArmVirtPkg/ArmVirtPkg.ci.yaml
> index 4553725ee5285d08a25f5e736f6b1cd25f4ba3e9..554ffb2609b25b46caa1fee8e994e2e6ea51f18f 100644
> --- a/ArmVirtPkg/ArmVirtPkg.ci.yaml
> +++ b/ArmVirtPkg/ArmVirtPkg.ci.yaml
> @@ -5,6 +5,8 @@
> # used for code analysis.
> #
> # Copyright (c) Microsoft Corporation
> +# Copyright (c) 2020, ARM Limited. All rights reserved.
> +#
> # SPDX-License-Identifier: BSD-2-Clause-Patent
> ##
> {
> @@ -34,6 +36,7 @@
> "OvmfPkg/OvmfPkg.dec",
> "EmbeddedPkg/EmbeddedPkg.dec",
> "ArmPlatformPkg/ArmPlatformPkg.dec",
> + "PcAtChipsetPkg/PcAtChipsetPkg.dec",
> "SecurityPkg/SecurityPkg.dec",
> "ShellPkg/ShellPkg.dec" #Is this ok?
> ],
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary
2020-06-24 13:34 ` [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
@ 2020-06-25 14:09 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 14:09 UTC (permalink / raw)
To: Sami Mujawar, devel; +Cc: leif, lersek, Matteo.Carlini, Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool is a virtual machine manager that can be used
> to launch guest VMs. Support for Kvmtool virtual
> platform has been added to ArmVirtPkg.
>
> Add kvmtool to the ArmVirtPkg dictionary to prevent
> the CI Spell check plugin from failing.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> ArmVirtPkg/ArmVirtPkg.ci.yaml | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/ArmVirtPkg/ArmVirtPkg.ci.yaml b/ArmVirtPkg/ArmVirtPkg.ci.yaml
> index 554ffb2609b25b46caa1fee8e994e2e6ea51f18f..cbe66f82de484dfbec8c81261d98d3ff647193ae 100644
> --- a/ArmVirtPkg/ArmVirtPkg.ci.yaml
> +++ b/ArmVirtPkg/ArmVirtPkg.ci.yaml
> @@ -98,7 +98,8 @@
> "unbootable",
> "virt's",
> "werror",
> - "xenio"
> + "xenio",
> + "kvmtool"
> ], # words to extend to the dictionary for this package
> "IgnoreStandardPaths": [], # Standard Plugin defined paths that should be ignore
> "AdditionalIncludePaths": [] # Additional paths to spell check (wildcards supported)
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer
2020-06-24 13:34 ` [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
@ 2020-06-25 14:09 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-25 14:09 UTC (permalink / raw)
To: Sami Mujawar, devel
Cc: leif, michael.d.kinney, Matteo.Carlini, Laura.Moretta, nd
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool is a virtual machine manager that can be used
> to launch guest partitions. It additionally emulates
> some hardware components e.g. RTC, CFI etc. essentially
> providing a virtual platform for a guest operating
> system (OS) to run.
>
> A standards-based OS would need UEFI firmware support
> for the Kvmtool virtual platform, for which additional
> modules are added to ArmVirtPkg.
> Adding myself as reviewer for these modules as
> advised on mailing list discussion at
> - https://edk2.groups.io/g/devel/topic/30915279#30693
> - https://edk2.groups.io/g/devel/topic/74200911#59650
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
>
> Notes:
> v3:
> - Updated Maintainers.txt to add reviewer for Kvmtool platform. [Sami]
> Ref: https://edk2.groups.io/g/devel/topic/74200911#59650
>
> Maintainers.txt | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Maintainers.txt b/Maintainers.txt
> index 32c9003a6209f38da4e422191a4ae327fd166dc0..2d9aefa6ed3181553ce908ddd85d6078fd5f829c 100644
> --- a/Maintainers.txt
> +++ b/Maintainers.txt
> @@ -152,6 +152,16 @@ F: ArmVirtPkg/XenPlatformHasAcpiDtDxe/
> F: ArmVirtPkg/XenioFdtDxe/
> R: Julien Grall <julien@xen.org>
>
> +ArmVirtPkg: Kvmtool emulated platform support
> +F: ArmVirtPkg/ArmVirtKvmTool.*
> +F: ArmVirtPkg/KvmtoolPlatformDxe/
> +F: ArmVirtPkg/Library/Fdt16550SerialPortHookLib/
> +F: ArmVirtPkg/Library/KvmtoolPlatformPeiLib/
> +F: ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/
> +F: ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/
> +F: ArmVirtPkg/Library/NorFlashKvmtoolLib/
> +R: Sami Mujawar <sami.mujawar@arm.com>
> +
> BaseTools
> F: BaseTools/
> W: https://github.com/tianocore/tianocore.github.io/wiki/BaseTools
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
2020-06-25 11:38 ` Ard Biesheuvel
@ 2020-06-25 17:33 ` Sami Mujawar
0 siblings, 0 replies; 38+ messages in thread
From: Sami Mujawar @ 2020-06-25 17:33 UTC (permalink / raw)
To: Ard Biesheuvel, devel@edk2.groups.io
Cc: leif@nuviainc.com, philmd@redhat.com, lersek@redhat.com,
Alexandru Elisei, Andre Przywara, Matteo Carlini, Laura Moretta,
nd
Hi Ard,
Please find my response marked inline as [SAMI].
Regards,
Sami Mujawar
-----Original Message-----
From: Ard Biesheuvel <ard.biesheuvel@arm.com>
Sent: 25 June 2020 12:39 PM
To: Sami Mujawar <Sami.Mujawar@arm.com>; devel@edk2.groups.io
Cc: leif@nuviainc.com; philmd@redhat.com; lersek@redhat.com; Alexandru Elisei <Alexandru.Elisei@arm.com>; Andre Przywara <Andre.Przywara@arm.com>; Matteo Carlini <Matteo.Carlini@arm.com>; Laura Moretta <Laura.Moretta@arm.com>; nd <nd@arm.com>
Subject: Re: [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib
On 6/24/20 3:34 PM, Sami Mujawar wrote:
> Kvmtool places the base address of the CFI flash in the device tree it
> passes to UEFI. This library parses the kvmtool device tree to read
> the CFI base address and initialise the PCDs use by the NOR flash
> driver and the variable storage.
>
> UEFI takes ownership of the CFI flash hardware, and exposes its
> functionality through the UEFI Runtime Variable Service. Therefore,
> disable the device tree node for the CFI flash used for storing the
> UEFI variables, to prevent the OS from attaching its device driver as
> well.
>
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> Acked-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> v3:
> - ASSERT is sufficient to test Locating [Ard]
> gFdtClientProtocolGuid as DEPEX ensures that this is
> guaranteed to succeed.
> - Removed additional error handling based on review [Sami]
> feedback.
> - Fix confusion caused by use of macro MAX_FLASH_BANKS. [Philippe]
> - Renamed MAX_FLASH_BANKS to MAX_FLASH_DEVICES. [Sami]
> - Use macro to define block size for flash. [Philippe]
> - Defined macro KVMTOOL_NOR_BLOCK_SIZE and also configured [Sami]
> to reflect the correct block size 64KB.
> - Disable the DT flash node used for UEFI variable storage [Sami]
> as UEFI takes ownership of the flash device.
> Ref: https://edk2.groups.io/g/devel/topic/74200914#60341
>
> v2:
> - Library to read CFI flash base address from DT and initialise [Sami]
> PCDs used for NOR flash variables.
>
> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c | 330 ++++++++++++++++++++
> ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf | 49 +++
> 2 files changed, 379 insertions(+)
>
> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..8e9dcf31691b4b12b9c7bac1ad4b
> a8d3a534a1d8
> --- /dev/null
> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtool.c
> @@ -0,0 +1,330 @@
> +/** @file
> + An instance of the NorFlashPlatformLib for Kvmtool platform.
> +
> + Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + **/
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/NorFlashPlatformLib.h> #include
> +<Library/UefiBootServicesTableLib.h>
> +#include <Protocol/FdtClient.h>
> +
> +/** Macro defining the NOR block size configured in Kvmtool.
> +*/
> +#define KVMTOOL_NOR_BLOCK_SIZE SIZE_64KB
> +
> +/** Macro defining the maximum number of Flash devices.
> +*/
> +#define MAX_FLASH_DEVICES 4
> +
> +/** Macro defining the cfi-flash label describing the UEFI variable store.
> +*/
> +#define LABEL_UEFI_VAR_STORE "System-firmware"
> +
> +STATIC NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_DEVICES];
> +STATIC UINTN mNorFlashDeviceCount = 0;
> +STATIC INT32 mUefiVarStoreNode = MAX_INT32;
> +STATIC FDT_CLIENT_PROTOCOL *mFdtClient;
> +
> +/** This function performs platform specific actions to initialise
> + the NOR flash, if required.
> +
> + @retval EFI_SUCCESS Success.
> +**/
> +EFI_STATUS
> +NorFlashPlatformInitialization (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> +
> + DEBUG ((DEBUG_INFO, "NorFlashPlatformInitialization\n"));
> +
> + if ((mNorFlashDeviceCount > 0) && (mUefiVarStoreNode != MAX_INT32)) {
> + //
> + // UEFI takes ownership of the cfi-flash hardware, and exposes its
> + // functionality through the UEFI Runtime Variable Service. This means we
> + // need to disable it in the device tree to prevent the OS from attaching
> + // its device driver as well.
> + // Note: This library is loaded by the FaultTolerantWriteDxe to setup the
> + // Ftw PCDs and later by the NorFlashDxe to provide the NorFlashPlatformLib
> + // interfaces. Therefore the FDT node used for UEFI storage variable is
> + // disabled here.
> + //
> + Status = mFdtClient->SetNodeProperty (
> + mFdtClient,
> + mUefiVarStoreNode,
> + "status",
> + "disabled",
> + sizeof ("disabled")
> + );
Can you explain why this action is deferred to NorFlashPlatformInitialization()?
[SAMI] This library is loaded twice. First by FaultTolerantWriteDxe (for reading PcdFlashNvStorageFtw*) and later by NorFlashDxe. If the node is disabled when the library is first loaded, then during the subsequent load FindNextCompatibleNode() skips the 'cfi-flash' node. Due to this we cannot setup the mNorFlashDevices[].
Since NorFlashPlatformInitialization() is called only by NorFlashDxe, we know it is safe to disable the node here.
[/SAMI]
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_WARN, "Failed to set cfi-flash status to 'disabled'\n"));
> + }
> + } else {
> + Status = EFI_NOT_FOUND;
> + DEBUG ((DEBUG_ERROR, "Flash device for UEFI variable storage not found\n"));
> + }
> +
> + return Status;
> +}
> +
> +/** Initialise Non volatile Flash storage variables.
> +
> + @param [in] FlashDevice Pointer to the NOR Flash device.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_OUT_OF_RESOURCES Insufficient flash storage space.
> +**/
STATIC
[SAMI] I will fix this. [/SAMI]
> +EFI_STATUS
> +SetupVariableStore (
> + IN NOR_FLASH_DESCRIPTION * FlashDevice
> + )
> +{
> + UINTN FlashRegion;
> + UINTN FlashNvStorageVariableBase;
> + UINTN FlashNvStorageFtwWorkingBase;
> + UINTN FlashNvStorageFtwSpareBase;
> + UINTN FlashNvStorageVariableSize;
> + UINTN FlashNvStorageFtwWorkingSize;
> + UINTN FlashNvStorageFtwSpareSize;
> +
> + FlashNvStorageVariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
> + FlashNvStorageFtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> + FlashNvStorageFtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> +
> + if ((FlashNvStorageVariableSize == 0) ||
> + (FlashNvStorageFtwWorkingSize == 0) ||
> + (FlashNvStorageFtwSpareSize == 0)) {
> + DEBUG ((DEBUG_ERROR, "FlashNvStorage size not defined\n"));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // Setup the variable store
> + FlashRegion = FlashDevice->DeviceBaseAddress;
> +
> + FlashNvStorageVariableBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageVariableSize);
> +
> + FlashNvStorageFtwWorkingBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
> +
> + FlashNvStorageFtwSpareBase = FlashRegion;
> + FlashRegion += PcdGet32 (PcdFlashNvStorageFtwSpareSize);
> +
> + if (FlashRegion > (FlashDevice->DeviceBaseAddress + FlashDevice->Size)) {
> + DEBUG ((DEBUG_ERROR, "Insufficient flash storage size\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + PcdSet32S (
> + PcdFlashNvStorageVariableBase,
> + FlashNvStorageVariableBase
> + );
> +
> + PcdSet32S (
> + PcdFlashNvStorageFtwWorkingBase,
> + FlashNvStorageFtwWorkingBase
> + );
> +
> + PcdSet32S (
> + PcdFlashNvStorageFtwSpareBase,
> + FlashNvStorageFtwSpareBase
> + );
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageVariableBase = 0x%x\n",
> + FlashNvStorageVariableBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageVariableSize = 0x%x\n",
> + FlashNvStorageVariableSize
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwWorkingBase = 0x%x\n",
> + FlashNvStorageFtwWorkingBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwWorkingSize = 0x%x\n",
> + FlashNvStorageFtwWorkingSize
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwSpareBase = 0x%x\n",
> + FlashNvStorageFtwSpareBase
> + ));
> + DEBUG ((
> + DEBUG_INFO,
> + "PcdFlashNvStorageFtwSpareSize = 0x%x\n",
> + FlashNvStorageFtwSpareSize
> + ));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/** Return the Flash devices on the platform.
> +
> + @param [out] NorFlashDescriptions Pointer to the Flash device description.
> + @param [out] Count Number of Flash devices.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +NorFlashPlatformGetDevices (
> + OUT NOR_FLASH_DESCRIPTION **NorFlashDescriptions,
> + OUT UINT32 *Count
> + )
> +{
> + if (mNorFlashDeviceCount > 0) {
> + *NorFlashDescriptions = mNorFlashDevices;
> + *Count = mNorFlashDeviceCount;
> + return EFI_SUCCESS;
> + }
> + return EFI_NOT_FOUND;
> +}
> +
> +/** Entrypoint for NorFlashPlatformLib.
> +
> + @param [in] ImageHandle The handle to the image.
> + @param [in] SystemTable Pointer to the System Table.
> +
> + @retval EFI_SUCCESS Success.
> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> + @retval EFI_NOT_FOUND Flash device not found.
> +**/
> +EFI_STATUS
> +EFIAPI
> +NorFlashPlatformLibConstructor (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE * SystemTable
> + )
> +{
> + INT32 Node;
> + EFI_STATUS Status;
> + EFI_STATUS FindNodeStatus;
> + CONST UINT32 *Reg;
> + UINT32 PropSize;
> + UINT64 Base;
> + UINT64 Size;
> + UINTN UefiVarStoreIndex;
> + CONST CHAR8 *Label;
> + UINT32 LabelLen;
> +
> + if (mNorFlashDeviceCount != 0) {
> + return EFI_SUCCESS;
> + }
> +
> + Status = gBS->LocateProtocol (
> + &gFdtClientProtocolGuid,
> + NULL,
> + (VOID **)&mFdtClient
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + UefiVarStoreIndex = MAX_UINTN;
> + for (FindNodeStatus = mFdtClient->FindCompatibleNode (
> + mFdtClient,
> + "cfi-flash",
> + &Node
> + );
> + !EFI_ERROR (FindNodeStatus) &&
> + (mNorFlashDeviceCount < MAX_FLASH_DEVICES);
> + FindNodeStatus = mFdtClient->FindNextCompatibleNode (
> + mFdtClient,
> + "cfi-flash",
> + Node,
> + &Node
> + )) {
> + Status = mFdtClient->GetNodeProperty (
> + mFdtClient,
> + Node,
> + "label",
> + (CONST VOID **)&Label,
> + &LabelLen
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: GetNodeProperty ('label') failed (Status == %r)\n",
> + __FUNCTION__,
> + Status
> + ));
> + } else if (AsciiStrCmp (Label, LABEL_UEFI_VAR_STORE) == 0) {
> + UefiVarStoreIndex = mNorFlashDeviceCount;
> + mUefiVarStoreNode = Node;
> + }
> +
> + Status = mFdtClient->GetNodeProperty (
> + mFdtClient,
> + Node,
> + "reg",
> + (CONST VOID **)&Reg,
> + &PropSize
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n",
> + __FUNCTION__, Status));
> + continue;
> + }
> +
> + ASSERT ((PropSize % (4 * sizeof (UINT32))) == 0);
> +
> + while ((PropSize >= (4 * sizeof (UINT32))) &&
> + (mNorFlashDeviceCount < MAX_FLASH_DEVICES)) {
> + Base = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[0]));
> + Size = SwapBytes64 (ReadUnaligned64 ((VOID *)&Reg[2]));
> + Reg += 4;
> +
> + PropSize -= 4 * sizeof (UINT32);
> +
> + //
> + // Disregard any flash devices that overlap with the primary FV.
> + // The firmware is not updatable from inside the guest anyway.
> + //
> + if ((PcdGet64 (PcdFvBaseAddress) + PcdGet32 (PcdFvSize) > Base) &&
> + (Base + Size) > PcdGet64 (PcdFvBaseAddress)) {
> + continue;
> + }
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "NOR%d : Base = 0x%lx, Size = 0x%lx\n",
> + mNorFlashDeviceCount,
> + Base,
> + Size
> + ));
> +
> + mNorFlashDevices[mNorFlashDeviceCount].DeviceBaseAddress = (UINTN)Base;
> + mNorFlashDevices[mNorFlashDeviceCount].RegionBaseAddress = (UINTN)Base;
> + mNorFlashDevices[mNorFlashDeviceCount].Size = (UINTN)Size;
> + mNorFlashDevices[mNorFlashDeviceCount].BlockSize = KVMTOOL_NOR_BLOCK_SIZE;
> + mNorFlashDeviceCount++;
> + }
> + } // for
> +
> + // Setup the variable store in the last device
> + if (mNorFlashDeviceCount > 0) {
> + if (UefiVarStoreIndex == MAX_UINTN) {
> + // We did not find a label matching the UEFI Variable store. Default to
> + // using the last cfi-flash device as the variable store.
> + UefiVarStoreIndex = mNorFlashDeviceCount - 1;
> + mUefiVarStoreNode = Node;
> + }
> + if (mNorFlashDevices[UefiVarStoreIndex].DeviceBaseAddress != 0) {
> + return SetupVariableStore (&mNorFlashDevices[UefiVarStoreIndex]);
> + }
> + }
> +
> + return EFI_NOT_FOUND;
> +}
> +
> diff --git a/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> new file mode 100644
> index 0000000000000000000000000000000000000000..a3230e4b2be668904322103825b93e867503984e
> --- /dev/null
> +++ b/ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
> @@ -0,0 +1,49 @@
> +#/** @file
> +#
> +# Copyright (c) 2020, ARM Ltd. All rights reserved.<BR>
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = NorFlashKvmtoolLib
> + FILE_GUID = E75F07A1-B160-4893-BDD4-09E32FF847DC
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = NorFlashPlatformLib
> + CONSTRUCTOR = NorFlashPlatformLibConstructor
> +
> +[Sources.common]
> + NorFlashKvmtool.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + ArmPlatformPkg/ArmPlatformPkg.dec
> + ArmVirtPkg/ArmVirtPkg.dec
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> + PcdLib
> + UefiBootServicesTableLib
> +
> +[Protocols]
> + gFdtClientProtocolGuid ## CONSUMES
> +
> +[Pcd]
> + gArmTokenSpaceGuid.PcdFvBaseAddress
> + gArmTokenSpaceGuid.PcdFvSize
> +
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
> +
> +[Depex]
> + gFdtClientProtocolGuid
> +
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation
2020-06-25 11:42 ` Ard Biesheuvel
@ 2020-06-26 9:23 ` Julien Grall
0 siblings, 0 replies; 38+ messages in thread
From: Julien Grall @ 2020-06-26 9:23 UTC (permalink / raw)
To: Ard Biesheuvel, Sami Mujawar, devel
Cc: leif, lersek, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
Hi,
On 25/06/2020 12:42, Ard Biesheuvel wrote:
> (+ Julien)
Thank you for the CC!
> On 6/24/20 3:34 PM, Sami Mujawar wrote:
>> Initialise serial port early so that the platform
>> memory map can be logged.
>>
>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>> ---
>> ArmVirtPkg/PrePi/PrePi.c | 10 +++++-----
>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/ArmVirtPkg/PrePi/PrePi.c b/ArmVirtPkg/PrePi/PrePi.c
>> index
>> 4f0c3f98bad63d0682cccd76a0a062d1fd4f46ab..5e144f4bdefb810708238097a3373f11d150bfe5
>> 100755
>> --- a/ArmVirtPkg/PrePi/PrePi.c
>> +++ b/ArmVirtPkg/PrePi/PrePi.c
>> @@ -1,6 +1,6 @@
>> /** @file
>> *
>> -* Copyright (c) 2011-2014, ARM Limited. All rights reserved.
>> +* Copyright (c) 2011-2020, ARM Limited. All rights reserved.
>> *
>> * SPDX-License-Identifier: BSD-2-Clause-Patent
>> *
>> @@ -60,16 +60,16 @@ PrePiMain (
>> //
>> InvalidateDataCacheRange((VOID *)(UINTN)PcdGet64
>> (PcdFdBaseAddress), PcdGet32 (PcdFdSize));
>> - // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
>> - Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32
>> (PcdSystemMemoryUefiRegionSize));
>> - ASSERT_EFI_ERROR (Status);
>> -
>> // Initialize the Serial Port
>> SerialPortInitialize ();
>> CharCount = AsciiSPrint (Buffer,sizeof (Buffer),"UEFI firmware
>> (version %s built at %a on %a)\n\r",
>> (CHAR16*)PcdGetPtr(PcdFirmwareVersionString), __TIME__, __DATE__);
>> SerialPortWrite ((UINT8 *) Buffer, CharCount);
>> + // Initialize MMU and Memory HOBs (Resource Descriptor HOBs)
>> + Status = MemoryPeim (UefiMemoryBase, FixedPcdGet32
>> (PcdSystemMemoryUefiRegionSize));
>> + ASSERT_EFI_ERROR (Status);
>> +
>> // Create the Stacks HOB (reserve the memory for all stacks)
>> StacksSize = PcdGet32 (PcdCPUCorePrimaryStackSize);
>> BuildStackHob (StacksBase, StacksSize);
>>
>
> We need to check whether this works on Xen - I don't remember whether we
> use some kind of cache coherent shared memory ring there for the serial
> console that only works if the MMU and caches are enabled. Julien?
Xen Console is using a shared memory ring that requires to be cache
coherent. So you wouldn't be able to use the current driver before the
MMU and caches are enabled.
It might be possible to make it work by issuing cache maintenance when
sending the characters.
Cheers,
--
Julien Grall
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering
2020-06-25 13:51 ` Ard Biesheuvel
@ 2020-06-26 13:22 ` Laszlo Ersek
2020-06-27 11:37 ` Ard Biesheuvel
0 siblings, 1 reply; 38+ messages in thread
From: Laszlo Ersek @ 2020-06-26 13:22 UTC (permalink / raw)
To: Ard Biesheuvel, Sami Mujawar, devel
Cc: leif, jian.j.wang, hao.a.wu, Alexandru.Elisei, Andre.Przywara,
Matteo.Carlini, Laura.Moretta, nd
On 06/25/20 15:51, Ard Biesheuvel wrote:
> On 6/24/20 3:34 PM, Sami Mujawar wrote:
>> The BaseSerialPortLib16550 library does not implement
>> a constructor. This prevents the correct constructor
>> invocation order for dependent libraries.
>> e.g. A PlatformHookLib (for the Serial Port) may have
>> a dependency on retrieving data from a Hob. A Hob
>> library implementation may configure its initial state
>> in the HobLib constructor. Since BaseSerialPortLib16550
>> does not implement a constructor, the Basetools do not
>> resolve the correct order for constructor invocation.
>>
>> To fix this, add an empty constructor to the serial port
>> library BaseSerialPortLib16550.
>>
>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>
> Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
>
> Note to maintainers:
> this works around a long standing BaseTools bug where constructor
> dependencies do not propagate through a library that lacks a constructor.
>
> For instance, in the following case
>
> LibA depends on LibB depends on LibC
>
> the constructors are *only* guaranteed to be invoked in the correct
> order (LibC, then LibB, then LibA) if LibB has a constructor in the
> first place, otherwise, the remaining constructors for LibA and LibC
> could be emitted in any order.
By now I've flipped my "mental default" to "use a constructor *unless*
counter-indicated by something"...
If we get a cycle due to always using constructors, the tools at least
complain (and we know something's fishy). With the opposite default, I
simply cannot guarantee that my new library instance LibB will *never*
break an eventual LibA -> LibB -> LibC constructor dependency chain.
In my new lib instance, I'm of course aware of the LibB -> LibC
dependency, but I can't tell anything about a future LibA -> LibB
dependency. :(
So I guess it's prudent to always add a constructor, even if it's empty.
Laszlo
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform
2020-06-25 14:08 ` Ard Biesheuvel
@ 2020-06-26 13:26 ` Laszlo Ersek
0 siblings, 0 replies; 38+ messages in thread
From: Laszlo Ersek @ 2020-06-26 13:26 UTC (permalink / raw)
To: Ard Biesheuvel, Sami Mujawar, devel
Cc: leif, Alexandru.Elisei, Andre.Przywara, Matteo.Carlini,
Laura.Moretta, nd
On 06/25/20 16:08, Ard Biesheuvel wrote:
> On 6/24/20 3:34 PM, Sami Mujawar wrote:
>> +!if $(ENABLE_NETWORK) == TRUE
>> + #
>> + # Networking stack
>> + #
>> + NetworkPkg/SnpDxe/SnpDxe.inf
>
> I think we have special .inc files in NetworkPkg now for this, no?
>
>> + NetworkPkg/DpcDxe/DpcDxe.inf
>> + NetworkPkg/ArpDxe/ArpDxe.inf
>> + NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
>> + NetworkPkg/Ip4Dxe/Ip4Dxe.inf
>> + NetworkPkg/MnpDxe/MnpDxe.inf
>> + NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
>> + NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
>> + NetworkPkg/Udp4Dxe/Udp4Dxe.inf
>> + NetworkPkg/TcpDxe/TcpDxe.inf
>> + NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
>> + NetworkPkg/IScsiDxe/IScsiDxe.inf
>> +!endif
Yes, we do:
$ git grep -F '!include NetworkPkg/' -- ArmVirtPkg
In particular, SnpDxe is not useful (we don't have UNDI drivers on
ARM/AARCH64, which SnpDxe wraps):
!if $(NETWORK_SNP_ENABLE) == TRUE
!error "NETWORK_SNP_ENABLE is IA32/X64/EBC only"
!endif
Thanks
Laszlo
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering
2020-06-26 13:22 ` Laszlo Ersek
@ 2020-06-27 11:37 ` Ard Biesheuvel
0 siblings, 0 replies; 38+ messages in thread
From: Ard Biesheuvel @ 2020-06-27 11:37 UTC (permalink / raw)
To: Laszlo Ersek, Sami Mujawar, devel
Cc: leif, jian.j.wang, hao.a.wu, Alexandru.Elisei, Andre.Przywara,
Matteo.Carlini, Laura.Moretta, nd
On 6/26/20 3:22 PM, Laszlo Ersek wrote:
> On 06/25/20 15:51, Ard Biesheuvel wrote:
>> On 6/24/20 3:34 PM, Sami Mujawar wrote:
>>> The BaseSerialPortLib16550 library does not implement
>>> a constructor. This prevents the correct constructor
>>> invocation order for dependent libraries.
>>> e.g. A PlatformHookLib (for the Serial Port) may have
>>> a dependency on retrieving data from a Hob. A Hob
>>> library implementation may configure its initial state
>>> in the HobLib constructor. Since BaseSerialPortLib16550
>>> does not implement a constructor, the Basetools do not
>>> resolve the correct order for constructor invocation.
>>>
>>> To fix this, add an empty constructor to the serial port
>>> library BaseSerialPortLib16550.
>>>
>>> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>>
>> Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
>>
>> Note to maintainers:
>> this works around a long standing BaseTools bug where constructor
>> dependencies do not propagate through a library that lacks a constructor.
>>
>> For instance, in the following case
>>
>> LibA depends on LibB depends on LibC
>>
>> the constructors are *only* guaranteed to be invoked in the correct
>> order (LibC, then LibB, then LibA) if LibB has a constructor in the
>> first place, otherwise, the remaining constructors for LibA and LibC
>> could be emitted in any order.
>
> By now I've flipped my "mental default" to "use a constructor *unless*
> counter-indicated by something"...
>
> If we get a cycle due to always using constructors, the tools at least
> complain (and we know something's fishy). With the opposite default, I
> simply cannot guarantee that my new library instance LibB will *never*
> break an eventual LibA -> LibB -> LibC constructor dependency chain.
>
> In my new lib instance, I'm of course aware of the LibB -> LibC
> dependency, but I can't tell anything about a future LibA -> LibB
> dependency. :(
>
> So I guess it's prudent to always add a constructor, even if it's empty.
>
Indeed.
I guess the issue arises when LibA's constructor calls a function
exposed by LibB. The fact that we care about constructor ordering at all
implies that constructor implementations are permitted to depend on
library routines, and so this should be perfectly fine. So it is really
up to the BaseTools to ensure that calling LibB is safe at this point,
which implies that the must constructors have been called for anything
that LibB depends on.
So I don't see how this is not a bug - ordering is either enforced or it
isn't, but the dependency graph should not omit libraries without
constructors.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [edk2-devel] [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver
2020-06-25 11:24 ` Ard Biesheuvel
@ 2020-06-29 2:36 ` Guomin Jiang
0 siblings, 0 replies; 38+ messages in thread
From: Guomin Jiang @ 2020-06-29 2:36 UTC (permalink / raw)
To: devel@edk2.groups.io, ard.biesheuvel@arm.com, Sami Mujawar
Cc: leif@nuviainc.com, Ni, Ray, Alexandru.Elisei@arm.com,
Andre.Przywara@arm.com, Matteo.Carlini@arm.com,
Laura.Moretta@arm.com, nd@arm.com
Hi Ard,
When build MinPlatform, it will show Edk2Platforms/Platform/Intel/MinPlatformPkg/Pci/Library/PciSegmentInfoLibSimple/PciSegmentInfoLibSimple.c:34:1: error: conflicting types for ‘GetPciSegmentInfo’
Could you confirm it?
Thanks
Guomin
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Ard
> Biesheuvel
> Sent: Thursday, June 25, 2020 7:25 PM
> To: Sami Mujawar <sami.mujawar@arm.com>; devel@edk2.groups.io
> Cc: leif@nuviainc.com; Ni, Ray <ray.ni@intel.com>;
> Alexandru.Elisei@arm.com; Andre.Przywara@arm.com;
> Matteo.Carlini@arm.com; Laura.Moretta@arm.com; nd@arm.com
> Subject: Re: [edk2-devel] [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO
> Support to RTC driver
>
> On 6/24/20 3:34 PM, Sami Mujawar wrote:
> > Some virtual machine managers like Kvmtool emulate the MC146818 RTC
> > controller in the MMIO space so that architectures that do not support
> > I/O Mapped I/O can use the RTC. This patch adds MMIO support to the
> > RTC controller driver.
> >
> > The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
> > If PcdRtcUseMmio is:
> > TRUE - Indicates the RTC port registers are in MMIO space.
> > FALSE - Indicates the RTC port registers are in I/O space.
> > Default is I/O space.
> >
> > Additionally two new PCDs PcdRtcIndexRegister64 and
> > PcdRtcTargetRegister64 have been introduced to provide the base
> > address for the RTC registers in the MMIO space.
> >
> > When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
> > converts the pointers to the RTC MMIO registers so that the RTC
> > registers are accessible post ExitBootServices.
> >
> > Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
>
> Can't we implement this without function pointers? What Leif suggested was
> using STATIC helper functions for read and write, where each one has a test
> for the feature PCD to decide whether to use the IO or the MMIO version.
>
> Using function pointers is unneeded complexity, especially given the fact
> that we need to fix up their values when the address space is virtually
> remapped by the OS.
>
> > ---
> >
> > Notes:
> > v3:
> > - Make PcdRtcUseMmio a feature PCD. [Sami]
> > - Read the RTC MMIO base address from the DT. [Andre]
> > - Introduce PCDs for RTC Index and Target register base [Sami]
> > address in the MMIO space.
> > - Move RTC MMIO region mapping code to a separate platform
> [Sami]
> > specific library. This library also reads the base addresses
> > for the RTC from DT and configures the RTC Index and Target
> > register PCDs.
> > Ref: https://edk2.groups.io/g/devel/topic/74200905#60307
> >
> > v2:
> > - Code review comments incorporated. [Sami]
> >
> > v1:
> > - Add support to read/write from RTC registers using MMIO access
> [Sami]
> > - Use wrapper functions for RtcRead/Write accessors [Leif]
> > Ref: https://edk2.groups.io/g/devel/topic/30915281#30695
> >
> > PcAtChipsetPkg/PcAtChipsetPkg.dec | 16 +++
> > PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 119
> +++++++++++++++++---
> > PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h | 31
> +++++
> > PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c |
> 72 +++++++++++-
> >
> PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntime
> Dxe.inf | 8 ++
> > 5 files changed, 230 insertions(+), 16 deletions(-)
> >
> > diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec
> > b/PcAtChipsetPkg/PcAtChipsetPkg.dec
> > index
> >
> 88de5cceea593176c3a2425a5963b66b789f2b9e..ed2d95550b8d153995b30cdc
> 290c
> > f3bb905e211b 100644
> > --- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
> > +++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
> > @@ -6,6 +6,7 @@
> > #
> > # Copyright (c) 2009 - 2019, Intel Corporation. All rights reserved.<BR>
> > # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> > +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> > #
> > # SPDX-License-Identifier: BSD-2-Clause-Patent
> > #
> > @@ -41,6 +42,13 @@ [PcdsFeatureFlag]
> > # @Prompt Configure HPET to use MSI.
> >
> >
> gPcAtChipsetPkgTokenSpaceGuid.PcdHpetMsiEnable|TRUE|BOOLEAN|0x00
> 001000
> >
> > + ## Indicates the RTC port registers are in MMIO space, or in I/O space.
> > + # Default is I/O space.<BR><BR>
> > + # TRUE - RTC port registers are in MMIO space.<BR>
> > + # FALSE - RTC port registers are in I/O space.<BR>
> > + # @Prompt RTC port registers use MMIO.
> > +
> > +
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|FALSE|BOOLEAN|0x0000
> 0021
> > +
> > [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx,
> PcdsPatchableInModule]
> > ## This PCD specifies the base address of the HPET timer.
> > # @Prompt HPET base address.
> > @@ -68,6 +76,14 @@ [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx,
> PcdsPatchableInModule]
> > # @Expression 0x80000001 |
> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear <
> gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
> >
> >
> gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x000
> 000
> > 0E
> >
> > + ## Specifies RTC Index Register address in MMIO space.
> > + # @Prompt RTC Index Register address
> > +
> > +
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0|UINT64|0x00
> 0
> > + 00022
> > +
> > + ## Specifies RTC Target Register address in MMIO space.
> > + # @Prompt RTC Target Register address
> > +
> > +
> gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0|UINT64|0x00
> > + 000023
> > +
> > [PcdsFixedAtBuild, PcdsPatchableInModule]
> > ## Defines the ACPI register set base address.
> > # The invalid 0xFFFF is as its default value. It must be configured to the
> real value.
> > diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> > b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> > index
> >
> 52af17941786ef81c3911512ee64551724e67209..5ddc06549103ce9944054d3a0
> 5b7
> > 3803f7037ec2 100644
> > --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> > +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
> > @@ -3,6 +3,7 @@
> >
> > Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> > Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> > +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> >
> > SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > @@ -10,6 +11,9 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > #include "PcRtc.h"
> >
> > +extern UINTN mRtcIndexRegister;
> > +extern UINTN mRtcTargetRegister;
> > +
> > //
> > // Days of month.
> > //
> > @@ -21,6 +25,28 @@ UINTN mDayOfMonth[] = { 31, 29, 31, 30, 31, 30, 31,
> 31, 30, 31, 30, 31 };
> > CHAR16 mTimeZoneVariableName[] = L"RTC";
> >
> > /**
> > + A function pointer that evaluates to a function that reads the RTC
> > + content through its registers either using IO or MMIO access.
> > +
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > +
> > + @return The data of UINT8 type read from RTC.
> > +**/
> > +RTC_READ RtcRead;
> > +
> > +/**
> > + A function pointer that evaluates to a function that reads the RTC
> > +content
> > + through its registers either using IO or MMIO access.
> > +
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > +
> > + @return The data of UINT8 type read from RTC.
> > +**/
> > +RTC_WRITE RtcWrite;
> > +
> > +/**
> > Compare the Hour, Minute and Second of the From time and the To
> time.
> >
> > Only compare H/M/S in EFI_TIME and ignore other fields here.
> > @@ -54,41 +80,96 @@ IsWithinOneDay (
> > );
> >
> > /**
> > - Read RTC content through its registers.
> > + Read RTC content through its registers using IO access.
> >
> > - @param Address Address offset of RTC. It is recommended to use
> macros such as
> > - RTC_ADDRESS_SECONDS.
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> >
> > @return The data of UINT8 type read from RTC.
> > **/
> > +STATIC
> > UINT8
> > -RtcRead (
> > - IN UINT8 Address
> > +EFIAPI
> > +IoRtcRead (
> > + IN UINTN Address
> > )
> > {
> > - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8)
> > (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
> > + IoWrite8 (
> > + PcdGet8 (PcdRtcIndexRegister),
> > + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) &
> 0x80))
> > + );
> > return IoRead8 (PcdGet8 (PcdRtcTargetRegister));
> > }
> >
> > /**
> > - Write RTC through its registers.
> > + Write RTC through its registers using IO access.
> >
> > - @param Address Address offset of RTC. It is recommended to use
> macros such as
> > - RTC_ADDRESS_SECONDS.
> > - @param Data The content you want to write into RTC.
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > + @param Data The content you want to write into RTC.
> >
> > **/
> > +STATIC
> > VOID
> > -RtcWrite (
> > - IN UINT8 Address,
> > +EFIAPI
> > +IoRtcWrite (
> > + IN UINTN Address,
> > IN UINT8 Data
> > )
> > {
> > - IoWrite8 (PcdGet8 (PcdRtcIndexRegister), (UINT8) (Address | (UINT8)
> > (IoRead8 (PcdGet8 (PcdRtcIndexRegister)) & 0x80)));
> > + IoWrite8 (
> > + PcdGet8 (PcdRtcIndexRegister),
> > + (UINT8)(Address | (UINT8)(IoRead8 (PcdGet8 (PcdRtcIndexRegister)) &
> 0x80))
> > + );
> > IoWrite8 (PcdGet8 (PcdRtcTargetRegister), Data);
> > }
> >
> > /**
> > + Read RTC content through its registers using MMIO access.
> > +
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > +
> > + @return The data of UINT8 type read from RTC.
> > +**/
> > +STATIC
> > +UINT8
> > +EFIAPI
> > +MmioRtcRead (
> > + IN UINTN Address
> > + )
> > +{
> > + MmioWrite8 (
> > + mRtcIndexRegister,
> > + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
> > + );
> > + return MmioRead8 (mRtcTargetRegister); }
> > +
> > +/**
> > + Write RTC through its registers using MMIO access.
> > +
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > + @param Data The content you want to write into RTC.
> > +
> > +**/
> > +STATIC
> > +VOID
> > +EFIAPI
> > +MmioRtcWrite (
> > + IN UINTN Address,
> > + IN UINT8 Data
> > + )
> > +{
> > + MmioWrite8 (
> > + mRtcIndexRegister,
> > + (UINT8)(Address | (UINT8)(MmioRead8 (mRtcIndexRegister) & 0x80))
> > + );
> > + MmioWrite8 (mRtcTargetRegister, Data); }
> > +
> > +/**
> > Initialize RTC.
> >
> > @param Global For global use inside this module.
> > @@ -113,6 +194,18 @@ PcRtcInit (
> > BOOLEAN Pending;
> >
> > //
> > + // Initialize the RtcRead and RtcWrite functions // based on the
> > + chosen IO/MMIO access.
> > + //
> > + if (FeaturePcdGet (PcdRtcUseMmio)) {
> > + RtcRead = MmioRtcRead;
> > + RtcWrite = MmioRtcWrite;
> > + } else {
> > + RtcRead = IoRtcRead;
> > + RtcWrite = IoRtcWrite;
> > + }
> > +
> > + //
> > // Acquire RTC Lock to make access to RTC atomic
> > //
> > if (!EfiAtRuntime ()) {
> > diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> > b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> > index
> >
> 47293ce44c5a1f4792892892f7da40d7f0a5a001..4074261c2ca5dbc7b0727ea796
> 11
> > 54eaf41c0e38 100644
> > --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> > +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.h
> > @@ -3,6 +3,7 @@
> >
> > Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> > Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> > +Copyright (c) 2019 - 2020, ARM Limited. All rights reserved.<BR>
> >
> > SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > @@ -371,4 +372,34 @@ PcRtcAcpiTableChangeCallback (
> > IN EFI_EVENT Event,
> > IN VOID *Context
> > );
> > +
> > +/**
> > + Function pointer to Read RTC content through its registers.
> > +
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > +
> > + @return The data of UINT8 type read from RTC.
> > +**/
> > +typedef
> > +UINT8
> > +(EFIAPI *RTC_READ) (
> > + IN UINTN Address
> > + );
> > +
> > +/**
> > + Function pointer to Write RTC through its registers.
> > +
> > + @param Address Address offset of RTC. It is recommended to use
> > + macros such as RTC_ADDRESS_SECONDS.
> > + @param Data The content you want to write into RTC.
> > +
> > +**/
> > +typedef
> > +VOID
> > +(EFIAPI *RTC_WRITE) (
> > + IN UINTN Address,
> > + IN UINT8 Data
> > + );
> > +
> > #endif
> > diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> > b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> > index
> >
> ccda6331373bfe4069b0a59495b5e5cc731c8fc8..e30883e53333aae655bbf891f8
> 6d
> > 1a6ed739715f 100644
> > --- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> > +++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtcEntry.c
> > @@ -2,16 +2,33 @@
> > Provides Set/Get time operations.
> >
> > Copyright (c) 2006 - 2018, Intel Corporation. All rights
> > reserved.<BR>
> > +Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> > SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > **/
> >
> > +#include <Library/DxeServicesTableLib.h>
> > #include "PcRtc.h"
> >
> > PC_RTC_MODULE_GLOBALS mModuleGlobal;
> >
> > EFI_HANDLE mHandle = NULL;
> >
> > +STATIC EFI_EVENT mVirtualAddrChangeEvent;
> > +
> > +UINTN mRtcIndexRegister;
> > +UINTN mRtcTargetRegister;
> > +
> > +//
> > +// Function pointer for the Rtc Read interface function //
> > +extern RTC_READ RtcRead;
> > +
> > +//
> > +// Function pointer for the Rtc Write interface function // extern
> > +RTC_WRITE RtcWrite;
> > +
> > /**
> > Returns the current time and date information, and the time-keeping
> capabilities
> > of the hardware platform.
> > @@ -106,6 +123,34 @@ PcRtcEfiSetWakeupTime (
> > }
> >
> > /**
> > + Fixup internal data so that EFI can be called in virtual mode.
> > + Call the passed in Child Notify event and convert any pointers in
> > + lib to virtual mode.
> > +
> > + @param[in] Event The Event that is being processed
> > + @param[in] Context Event Context
> > +**/
> > +VOID
> > +EFIAPI
> > +LibRtcVirtualNotifyEvent (
> > + IN EFI_EVENT Event,
> > + IN VOID *Context
> > + )
> > +{
> > + // Only needed if you are going to support the OS calling RTC
> > +functions in
> > + // virtual mode. You will need to call EfiConvertPointer (). To
> > +convert any
> > + // stored physical addresses to virtual address. After the OS
> > +transitions to
> > + // calling in virtual mode, all future runtime calls will be made
> > +in virtual
> > + // mode.
> > + EfiConvertPointer (0x0, (VOID**)&mRtcIndexRegister);
> > + EfiConvertPointer (0x0, (VOID**)&mRtcTargetRegister);
> > +
> > + // Convert the RtcRead and RtcWrite pointers for runtime use.
> > + EfiConvertPointer (0x0, (VOID**)&RtcRead);
> > + EfiConvertPointer (0x0, (VOID**)&RtcWrite); }
> > +
> > +/**
> > The user Entry Point for PcRTC module.
> >
> > This is the entry point for PcRTC module. It installs the UEFI
> > runtime service @@ -125,12 +170,17 @@ InitializePcRtc (
> > IN EFI_SYSTEM_TABLE *SystemTable
> > )
> > {
> > - EFI_STATUS Status;
> > - EFI_EVENT Event;
> > + EFI_STATUS Status;
> > + EFI_EVENT Event;
> >
> > EfiInitializeLock (&mModuleGlobal.RtcLock, TPL_CALLBACK);
> > mModuleGlobal.CenturyRtcAddress = GetCenturyRtcAddress ();
> >
> > + if (FeaturePcdGet (PcdRtcUseMmio)) {
> > + mRtcIndexRegister = (UINTN)PcdGet64 (PcdRtcIndexRegister64);
> > + mRtcTargetRegister = (UINTN)PcdGet64 (PcdRtcTargetRegister64); }
> > +
> > Status = PcRtcInit (&mModuleGlobal);
> > ASSERT_EFI_ERROR (Status);
> >
> > @@ -165,7 +215,23 @@ InitializePcRtc (
> > NULL,
> > NULL
> > );
> > - ASSERT_EFI_ERROR (Status);
> > + if (EFI_ERROR (Status)) {
> > + ASSERT_EFI_ERROR (Status);
> > + return Status;
> > + }
> > +
> > + if (FeaturePcdGet (PcdRtcUseMmio)) {
> > + // Register for the virtual address change event
> > + Status = gBS->CreateEventEx (
> > + EVT_NOTIFY_SIGNAL,
> > + TPL_NOTIFY,
> > + LibRtcVirtualNotifyEvent,
> > + NULL,
> > + &gEfiEventVirtualAddressChangeGuid,
> > + &mVirtualAddrChangeEvent
> > + );
> > + ASSERT_EFI_ERROR (Status);
> > + }
> >
> > return Status;
> > }
> > diff --git
> >
> a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntim
> eD
> > xe.inf
> >
> b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntim
> eD
> > xe.inf index
> >
> c73ee98105e510f9e4e23c1a6c1e5c505325d2c9..0d8eca28b65954b073a72fc4fe
> 5a
> > d6247320e79d 100644
> > ---
> >
> a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntim
> eD
> > xe.inf
> > +++
> b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRunt
> > +++ imeDxe.inf
> > @@ -6,6 +6,7 @@
> > #
> > # Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
> > # Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> > +# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.<BR>
> > #
> > # SPDX-License-Identifier: BSD-2-Clause-Patent
> > #
> > @@ -61,6 +62,11 @@ [Guids]
> > ## SOMETIMES_CONSUMES ## SystemTable
> > gEfiAcpiTableGuid
> >
> > + gEfiEventVirtualAddressChangeGuid
> > +
> > +[FeaturePcd]
> > + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio ##
> CONSUMES
> > +
> > [FixedPcd]
> > gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA ##
> CONSUMES
> > gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB ##
> CONSUMES
> > @@ -72,6 +78,8 @@ [Pcd]
> > gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear ##
> CONSUMES
> > gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister ##
> CONSUMES
> > gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister ##
> CONSUMES
> > + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64 ##
> CONSUMES
> > + gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64 ##
> CONSUMES
> >
> > [Depex]
> > gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
> >
>
>
>
^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2020-06-29 2:36 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
2020-06-25 11:24 ` Ard Biesheuvel
2020-06-29 2:36 ` [edk2-devel] " Guomin Jiang
2020-06-24 13:34 ` [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
2020-06-25 11:31 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 03/15] ArmPlatformPkg: Dynamic flash variable base Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
2020-06-25 11:35 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 05/15] ArmVirtPkg: kvmtool platform memory map Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
2020-06-25 8:45 ` Philippe Mathieu-Daudé
2020-06-25 11:19 ` [edk2-devel] " Ard Biesheuvel
2020-06-25 11:41 ` Philippe Mathieu-Daudé
2020-06-25 11:38 ` Ard Biesheuvel
2020-06-25 17:33 ` Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation Sami Mujawar
2020-06-25 11:42 ` Ard Biesheuvel
2020-06-26 9:23 ` Julien Grall
2020-06-24 13:34 ` [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
2020-06-25 13:51 ` Ard Biesheuvel
2020-06-26 13:22 ` Laszlo Ersek
2020-06-27 11:37 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
2020-06-25 13:52 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
2020-06-25 13:56 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
2020-06-25 14:05 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform Sami Mujawar
2020-06-25 14:08 ` Ard Biesheuvel
2020-06-26 13:26 ` Laszlo Ersek
2020-06-24 13:34 ` [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
2020-06-25 14:08 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
2020-06-25 14:09 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
2020-06-25 14:09 ` Ard Biesheuvel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox