From: "Sami Mujawar" <sami.mujawar@arm.com>
To: <devel@edk2.groups.io>
Cc: Sami Mujawar <sami.mujawar@arm.com>, <ard.biesheuvel@arm.com>,
<leif@nuviainc.com>, <lersek@redhat.com>,
<Alexandru.Elisei@arm.com>, <Andre.Przywara@arm.com>,
<Matteo.Carlini@arm.com>, <Laura.Moretta@arm.com>, <nd@arm.com>
Subject: [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform
Date: Wed, 24 Jun 2020 14:34:55 +0100 [thread overview]
Message-ID: <20200624133458.61920-13-sami.mujawar@arm.com> (raw)
In-Reply-To: <20200624133458.61920-1-sami.mujawar@arm.com>
Kvmtool is a virtual machine manager that enables hosting
KVM guests. Kvmtool emulates certain devices like serial
port, RTC, etc. essentially providing a virtual platform.
This patch adds support for kvmtool virtual platform.
Following is a brief description of the firmware
implementation choices:
- Serial Port: 16550 UART
On some platforms the 16550 UART is interfaced using
PCI. Therefore, the 16550 Serial port library is
dependent on the PCI library. The 16550 UART driver
checks the Device ID represented using the PCD
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
to determine if the UART is behind PCI.
If the Device ID is 0xFF then the serial 16550 UART
is not behind PCI.
On Kvmtool the Serial 16550 UART is not behind PCI,
and therefore a combination of BasePciLibPciExpress
and BasePciExpressLib is used to satisfy the PCI
library dependency.
The PcdSerialPciDeviceInfo is also set to 0xFF to
indicate that the Serial 16550 UART is not behind
PCI. The PCD PcdSerialUseMmio is also set to TRUE
to indicate MMIO accesses are required for the
UART registers.
Additionally two instances of PlatformHookLibs are
provided EarlyFdt16550SerialPortHookLib and
Fdt16550SerialPortHookLib to patch the
PcdSerialRegisterBase so that BaseSerialPortLib16550
and retrieve the base address of the 16550 UART.
- Dependency order for Flash
FaultTolerantWriteDxe makes use of PCDs (e.g.
PcdFlashNvStorageFtwSpareBase64 etc.), which in
case of kvmtool will be evaluated based on the CFI
flash base address read from the DT. These variables
are populated in the NorFlashPlatformLib loaded by
ArmVeNorFlashDxe.
This results in a dependency issue with
FaultTolerantWriteDxe. To resolve this make the
NorFlashPlatformLib as a library dependency for
FaultTolerantWriteDxe.
- RTC Controller
A separate patch updates the MC146818 RTC controller
driver to support MMIO accesses.
A KvmtoolRtcFdtClientLib has been introduced to
extract the base addresses of the RTC controller
from the platform device tree and map the RTC
register space as Runtime Memory.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- Use correct terminology. kvmtool is *not* an emulator. [Ard]
- Updated patch series to reflect correct terminology. [Sami]
- Don't define bits and pieces you cannot make use of. [Ard]
- Updated workspace to remove unsupported features. [Sami]
Ref: https://edk2.groups.io/g/devel/topic/74200917#59552
v2:
- Updates to reflect review comments and support [Sami]
for latest features emulated by kvmtool e.g. CFI.
v1:
- Add support for Kvmtool emulated platform [Sami]
- Add more justification for platform and [Laszlo]
document platform maintainer.
Ref: https://edk2.groups.io/g/devel/topic/30915279#30693
ArmVirtPkg/ArmVirtKvmTool.dsc | 345 ++++++++++++++++++++
ArmVirtPkg/ArmVirtKvmTool.fdf | 259 +++++++++++++++
2 files changed, 604 insertions(+)
diff --git a/ArmVirtPkg/ArmVirtKvmTool.dsc b/ArmVirtPkg/ArmVirtKvmTool.dsc
new file mode 100644
index 0000000000000000000000000000000000000000..76e158eaea4be089de65f0f908f8623840681e0e
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtKvmTool.dsc
@@ -0,0 +1,345 @@
+# @file
+# Workspace file for KVMTool virtual platform.
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = ArmVirtKvmTool
+ PLATFORM_GUID = 4CB2C61E-FA32-4130-8E37-54ABC71A1A43
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x0001001B
+!ifdef $(EDK2_OUT_DIR)
+ OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
+!else
+ OUTPUT_DIRECTORY = Build/ArmVirtKvmTool-$(ARCH)
+!endif
+ SUPPORTED_ARCHITECTURES = AARCH64|ARM
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = ArmVirtPkg/ArmVirtKvmTool.fdf
+
+ #
+ # Defines for default states. These can be changed on the command line.
+ # -D FLAG=VALUE
+ #
+ DEFINE ENABLE_NETWORK = FALSE
+
+!include ArmVirtPkg/ArmVirt.dsc.inc
+
+[LibraryClasses.common]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+
+ # Virtio Support
+ VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
+ VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
+
+ ArmPlatformLib|ArmPlatformPkg/Library/ArmPlatformLibNull/ArmPlatformLibNull.inf
+ ArmVirtMemInfoLib|ArmVirtPkg/Library/KvmtoolVirtMemInfoLib/KvmtoolVirtMemInfoLib.inf
+
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+ NorFlashPlatformLib|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+
+ # BDS Libraries
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+ BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+ FrameBufferBltLib|MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf
+
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+ PciPcdProducerLib|ArmVirtPkg/Library/FdtPciPcdProducerLib/FdtPciPcdProducerLib.inf
+ PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
+ PciHostBridgeLib|ArmVirtPkg/Library/FdtPciHostBridgeLib/FdtPciHostBridgeLib.inf
+
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+
+ PlatformPeiLib|ArmVirtPkg/Library/KvmtoolPlatformPeiLib/KvmtoolPlatformPeiLib.inf
+
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/Fdt16550SerialPortHookLib.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+[LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE, LibraryClasses.common.PEIM]
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+ PlatformHookLib|ArmVirtPkg/Library/Fdt16550SerialPortHookLib/EarlyFdt16550SerialPortHookLib.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+
+[BuildOptions]
+ *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
+ #
+ # We need to avoid jump tables in SEC modules, so that the PE/COFF
+ # self-relocation code itself is guaranteed to be position independent.
+ #
+ GCC:*_*_*_CC_FLAGS = -fno-jump-tables
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
+
+ # Use MMIO for accessing RTC controller registers.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcUseMmio|TRUE
+
+[PcdsFixedAtBuild.common]
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
+
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|1
+
+!if $(ARCH) == AARCH64
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+!endif
+
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
+
+ # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+
+ #
+ # TTY Terminal Type
+ # 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
+
+ #
+ # ARM Virtual Architectural Timer -- fetch frequency from KVM
+ #
+ gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0
+
+ # Use MMIO for accessing Serial port registers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+
+ #
+ # The maximum physical I/O addressability of the processor, set with
+ # BuildCpuHob().
+ #
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
+
+[PcdsPatchableInModule.common]
+ #
+ # This will be overridden in the code
+ #
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
+
+ #
+ # The device tree base address is handed off by kvmtool.
+ # We are booting from RAM using the Linux kernel boot protocol,
+ # x0 will point to the DTB image in memory.
+ #
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0x0
+
+ gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
+ gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x0
+
+[PcdsDynamicDefault.common]
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
+
+ gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x0
+
+ #
+ # ARM General Interrupt Controller
+ #
+ gArmTokenSpaceGuid.PcdGicDistributorBase|0x0
+ gArmTokenSpaceGuid.PcdGicRedistributorsBase|0x0
+ gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0x0
+
+ #
+ # Set video resolution for boot options and for text setup.
+ # PlatformDxe can set the former at runtime.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
+
+ ## Force DTB
+ gArmVirtTokenSpaceGuid.PcdForceNoAcpi|TRUE
+
+ # Setup Flash storage variables
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x40000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x40000
+
+ ## RTC Register address in MMIO space.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister64|0x0
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister64|0x0
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+ #
+ # PEI Phase modules
+ #
+ ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf {
+ <LibraryClasses>
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ }
+
+ #
+ # DXE
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ }
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+
+ #
+ # Architectural Protocols
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ }
+
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/NorFlashKvmtoolLib/NorFlashKvmtoolLib.inf
+ }
+
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+ MdeModulePkg/Universal/Metronome/Metronome.inf
+ PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/KvmtoolRtcFdtClientLib/KvmtoolRtcFdtClientLib.inf
+ }
+
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf {
+ <LibraryClasses>
+ NULL|ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.inf
+ }
+
+ ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+
+ #
+ # Platform Driver
+ #
+ ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
+ ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
+ ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+ ArmVirtPkg/HighMemDxe/HighMemDxe.inf
+ OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ OvmfPkg/VirtioNetDxe/VirtioNet.inf
+ OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+ MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf {
+ <LibraryClasses>
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ MdeModulePkg/Logo/LogoDxe.inf
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
+
+!if $(ENABLE_NETWORK) == TRUE
+ #
+ # Networking stack
+ #
+ NetworkPkg/SnpDxe/SnpDxe.inf
+ NetworkPkg/DpcDxe/DpcDxe.inf
+ NetworkPkg/ArpDxe/ArpDxe.inf
+ NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
+ NetworkPkg/Ip4Dxe/Ip4Dxe.inf
+ NetworkPkg/MnpDxe/MnpDxe.inf
+ NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
+ NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
+ NetworkPkg/Udp4Dxe/Udp4Dxe.inf
+ NetworkPkg/TcpDxe/TcpDxe.inf
+ NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ NetworkPkg/IScsiDxe/IScsiDxe.inf
+!endif
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
diff --git a/ArmVirtPkg/ArmVirtKvmTool.fdf b/ArmVirtPkg/ArmVirtKvmTool.fdf
new file mode 100644
index 0000000000000000000000000000000000000000..9c70b315cc787bba6db747298a600d65759b4188
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtKvmTool.fdf
@@ -0,0 +1,259 @@
+#
+# Copyright (c) 2018 - 2020, ARM Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.KVMTOOL_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
+# The size in bytes of the FLASH Device
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+#
+# Implement the Linux kernel header layout so that the loader will identify
+# it as something bootable, and execute it with a FDT pointer in x0 or r2.
+# This area will be reused to store a copy of the FDT so round it up to 32 KB.
+#
+0x00000000|0x00008000
+DATA = {
+!if $(ARCH) == AARCH64
+ 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
+ 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
+ 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
+ 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
+ 0x41, 0x52, 0x4d, 0x64, # magic: "ARM\x64"
+ 0x00, 0x00, 0x00, 0x00 # res5
+!else
+ 0x08, 0x10, 0x4f, 0xe2, # adr r1, .
+ 0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+
+ 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
+ 0x18, 0x28, 0x6f, 0x01, # magic
+ 0x00, 0x00, 0x00, 0x00, # start
+ 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
+ 0x01, 0x02, 0x03, 0x04 # endiannness flag
+!endif
+}
+
+0x00008000|0x001f8000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+FvNameGuid = 8A91C08E-7D9D-4933-84D6-901D26D0766E
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+ INF ArmVirtPkg/VirtioFdtDxe/VirtioFdtDxe.inf
+ INF ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+ INF ArmVirtPkg/KvmtoolPlatformDxe/KvmtoolPlatformDxe.inf
+ INF ArmVirtPkg/HighMemDxe/HighMemDxe.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/Metronome/Metronome.inf
+ INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
+
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning + UDF filesystem
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
+
+ #
+ # Platform Driver
+ #
+ INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
+ INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
+ INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+ INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ INF MdeModulePkg/Application/UiApp/UiApp.inf
+
+!if $(ENABLE_NETWORK) == TRUE
+ #
+ # Networking stack
+ #
+ INF NetworkPkg/SnpDxe/SnpDxe.inf
+ INF NetworkPkg/DpcDxe/DpcDxe.inf
+ INF NetworkPkg/ArpDxe/ArpDxe.inf
+ INF NetworkPkg/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF NetworkPkg/Ip4Dxe/Ip4Dxe.inf
+ INF NetworkPkg/MnpDxe/MnpDxe.inf
+ INF NetworkPkg/VlanConfigDxe/VlanConfigDxe.inf
+ INF NetworkPkg/Mtftp4Dxe/Mtftp4Dxe.inf
+ INF NetworkPkg/Udp4Dxe/Udp4Dxe.inf
+ INF NetworkPkg/TcpDxe/TcpDxe.inf
+ INF NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ INF NetworkPkg/IScsiDxe/IScsiDxe.inf
+!endif
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+!if $(ARCH) == AARCH64
+ #
+ # EBC support
+ #
+ INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
+!endif
+
+ #
+ # TianoCore logo (splash screen)
+ #
+ INF MdeModulePkg/Logo/LogoDxe.inf
+
+ #
+ # Ramdisk support
+ #
+ INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF RuleOverride = SELF_RELOC ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+!include ArmVirtRules.fdf.inc
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
next prev parent reply other threads:[~2020-06-24 13:35 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 13:34 [PATCH v3 00/15] Kvmtool guest firmware support for Arm Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 01/15] PcAtChipsetPkg: Add MMIO Support to RTC driver Sami Mujawar
2020-06-25 11:24 ` Ard Biesheuvel
2020-06-29 2:36 ` [edk2-devel] " Guomin Jiang
2020-06-24 13:34 ` [PATCH v3 02/15] ArmVirtPkg: Add Kvmtool RTC Fdt Client Library Sami Mujawar
2020-06-25 11:31 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 03/15] ArmPlatformPkg: Dynamic flash variable base Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 04/15] ArmVirtPkg: Add kvmtool platform driver Sami Mujawar
2020-06-25 11:35 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 05/15] ArmVirtPkg: kvmtool platform memory map Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 06/15] ArmVirtPkg: Add Kvmtool NOR flash lib Sami Mujawar
2020-06-25 8:45 ` Philippe Mathieu-Daudé
2020-06-25 11:19 ` [edk2-devel] " Ard Biesheuvel
2020-06-25 11:41 ` Philippe Mathieu-Daudé
2020-06-25 11:38 ` Ard Biesheuvel
2020-06-25 17:33 ` Sami Mujawar
2020-06-24 13:34 ` [PATCH v3 07/15] ArmVirtPkg: Early serial port initialisation Sami Mujawar
2020-06-25 11:42 ` Ard Biesheuvel
2020-06-26 9:23 ` Julien Grall
2020-06-24 13:34 ` [PATCH v3 08/15] MdeModulePkg: Fix constructor invocation ordering Sami Mujawar
2020-06-25 13:51 ` Ard Biesheuvel
2020-06-26 13:22 ` Laszlo Ersek
2020-06-27 11:37 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 09/15] ArmVirtPkg: GUID Hob for 16550 UART base address Sami Mujawar
2020-06-25 13:52 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 10/15] ArmVirtPkg: 16550 UART Platform hook library Sami Mujawar
2020-06-25 13:56 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 11/15] ArmVirtPkg: Add Kvmtool Platform Pei Lib Sami Mujawar
2020-06-25 14:05 ` Ard Biesheuvel
2020-06-24 13:34 ` Sami Mujawar [this message]
2020-06-25 14:08 ` [PATCH v3 12/15] ArmVirtPkg: Support for kvmtool virtual platform Ard Biesheuvel
2020-06-26 13:26 ` Laszlo Ersek
2020-06-24 13:34 ` [PATCH v3 13/15] ArmVirtPkg: Package dependency for MC146818 RTC Sami Mujawar
2020-06-25 14:08 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 14/15] ArmVirtPkg: Add kvmtool to package dictionary Sami Mujawar
2020-06-25 14:09 ` Ard Biesheuvel
2020-06-24 13:34 ` [PATCH v3 15/15] Maintainer.txt: Add Kvmtool platform reviewer Sami Mujawar
2020-06-25 14:09 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200624133458.61920-13-sami.mujawar@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox